Search Results

Search found 6931 results on 278 pages for 'almost surely'.

Page 178/278 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

• How employable am I as a programmer?

  - by dsimcha

  I'm currently a Ph.D. student in Biomedical Engineering with a concentration in computational biology and am starting to think about what I want to do after graduate school. I feel like I've accumulated a lot of programming skills while in grad school, but taken a very non-traditional path to learning all this stuff. I'm wondering whether I would have an easy time getting hired as a programmer and could fall back on that if I can't find a good job directly in my field, and if so whether I would qualify for a more prestigious position than "code monkey". Things I Have Going For Me Approximately 4 years of experience programming as part of my research. I believe I have a solid enough grasp of the fundamentals that I could pick up new languages and technologies pretty fast, and could demonstrate this in an interview. Good math and statistics skills. An extensive portfolio of open source work (and the knowledge that working on these projects implies): I wrote a statistics library in D, mostly from scratch. I wrote a parallelism library (parallel map, reduce, foreach, task parallelism, pipelining, etc.) that is currently in review for adoption by the D standard library. I wrote a 2D plotting library for D against the GTK Cairo backend. I currently use it for most of the figures I make for my research. I've contributed several major performance optimizations to the D garbage collector. (Most of these were low-hanging fruit, but it still shows my knowledge of low-level issues like memory management, pointers and bit twiddling.) I've contributed lots of miscellaneous bug fixes to the D standard library and could show the change logs to prove it. (This demonstrates my ability read other people's code.) Things I Have Going Against Me Most of my programming experience is in D and Python. I have very little to virtually no experience in the more established, "enterprise-y" languages like Java, C# and C++, though I have learned a decent amount about these languages from small, one-off projects and discussions about language design in the D community. In general I have absolutely no knowledge of "enterprise-y" technlogies. I've never used a framework before, possibly because most reusable code for scientific work and for D tends to call itself a "library" instead. I have virtually no formal computer science/software engineering training. Almost all of my knowledge comes from talking to programming geek friends, reading blogs, forums, StackOverflow, etc. I have zero professional experience with the official title of "developer", "software engineer", or something similar.

  Read the article

• What Counts for a DBA: Passion

  - by drsql

  One of my first questions, when interviewing for a DBA/Programmer position, is always: “Why do you want this job?” The answers I receive range from cheesy hyperbole (“I want to enhance your services with my vast knowledge”) to deadpan realism (“I have N kids who all have a hole in the front of their face where food goes"). Both answers are fine in their own way, at least displaying some self-confidence, humour and honesty, but once in a while, I'll hear the answer that is music to me ears... “I LOVE DATABASES!” Whenever I hear it, my nerves tingle in hopeful anticipation; have I found someone for whom working with database isn't just a job, but a passion? Inevitably, I'm often disappointed. What initially seemed like passion turns out to be rather shallow enthusiasm; the person is enthusiastic about working with databases in the same way he or she might be about eating a bag of Cajun spiced kettle chips; enjoyable, but not something to think about too deeply or take too seriously. Enthusiasm comes, and enthusiasm goes. I've seen countless technical forum users burst onto the scene in a blaze of frantic question-answering, only to fade away within days, never to be heard from again. Passion, however, is more of a longstanding commitment. The biographies of the great technologists and authors of the recent past are full of the sort of passion and engrossment that lead a person to write a novel non-stop for a fortnight with no sleep and only dog food to eat (Philip K. Dick), or refuse to leave the works of the first tunnel under the Thames, even though it was flooded (Brunel). In a similar (though more modest) way, my passion for working with databases has led me to acts that might cause someone for whom it was "just a job" to roll their eyes in disbelief. Most evenings you're more likely to find me reading a database book than watching TV. I've spent hundreds of hours of my spare time writing blogs and articles (some of which are only read by tens of people); I've spent hundreds of dollars travelling to conferences, paying my own flight and hotel expenses, so that I can share a little of what I know, and mix with some like-minded people. And I know I'm far from alone in this, in the SQL Server community. Passion isn't everything, of course, and it isn't always accompanied by any great skill, but in almost every case, that skill can be cultivated over time. If you are doing what you are passionate about, work turns into more than just a way to feed your kids; it becomes your hobby, entertainment, and preoccupation. And it is this passion that gives a DBA the obsessive stubbornness, the refusal to be beaten by even the most difficult problem, which is often so crucial. A final word of warning though: passion without limits can turn weird. Never let it get in the way of your wife, kids, bills, or personal hygiene.

  Read the article

• SQL Saturday 43 (Redmond, WA) Review

  - by BuckWoody

  Last Saturday (June 12th) we held a “SQL Saturday” (more about those here) event in Redmond, Washington. The event was held at the Microsoft campus, at the Mixer in our new location called the “Commons”. This is a mall-like area that we have on campus, and the Mixer is a large building with lots of meeting rooms, so it made a perfect location for the event. There was a sign to find the parking, and once there they had a sign to show how to get to the building. Since it’s a secure facility, Greg Larsen and crew had a person manning the door so that even late arrivals could get in. We had about 400 sign up for the event, and a little over 300 attend (official numbers later). I think we would have had a lot more, but the sun was out – and you just can’t underestimate the effect of that here in the Pacific Northwest. We joke a lot about not seeing the sun much, but when a day like what we had on Saturday comes around, and on a weekend at that, you’d cancel your wedding to go outside to play in the sun. And your spouse would agree with you for doing it. We had some top-notch speakers, including Clifford Dibble and Kalen Delany. The food was great, we had multiple sponsors (including Confio who seems to be at all of these) and the attendees were from all over the professional spectrum, from developers to BI to DBA’s. Everyone I saw was very engaged, and when I visited room-to-room I saw almost no one in the halls – everyone was in the sessions. I also saw a much larger Microsoft presence this year, especially from Dan Jones’ team. I had a great turnout at my session, and yes, I was wearing an Oracle staff shirt. I did that because I wanted to show that the session I gave on “SQL Server for the Oracle DBA” was non-marketing – I couldn’t exactly bash Oracle wearing their colors! These events are amazing. I can’t emphasize enough how much I appreciate the volunteers and how much work they put into these events, and to you for coming. If you’re reading this and you haven’t attended one yet, definitely find out if there is one in your area – and if not, start one. It’s a lot of work, but it’s totally worth it.       Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Should EICAR be updated to test the revision of Antivirus system?

  - by makerofthings7

  I'm posting this here since programmers write viruses, and AV software. They also have the best knowledge of heuristics and how AV systems work (cloaking etc). The EICAR test file was used to functionally test an antivirus system. As it stands today almost every AV system will flag EICAR as being a "test" virus. For more information on this historic test virus please click here. Currently the EICAR test file is only good for testing the presence of an AV solution, but it doesn't check for engine file or DAT file up-to-dateness. In other words, why do a functional test of a system that could have definition files that are more than 10 years old. With the increase of zero day threats it doesn't make much sense to functionally test your system using EICAR. That being said, I think EICAR needs to be updated/modified to be effective test that works in conjunction with an AV management solution. This question is about real world testing, without using live viruses... which is the intent of the original EICAR. That being said I'm proposing a new EICAR file format with the appendage of an XML blob that will conditionally cause the Antivirus engine to respond. X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-EXTENDED-ANTIVIRUS-TEST-FILE!$H+H* <?xml version="1.0"?> <engine-valid-from>2010-1-1Z</engine-valid-from> <signature-valid-from>2010-1-1Z</signature-valid-from> <authkey>MyTestKeyHere</authkey> In this sample, the antivirus engine would only alert on the EICAR file if both the signature or engine file is equal to or newer than the valid-from date. Also there is a passcode that will protect the usage of EICAR to the system administrator. If you have a backgound in "Test Driven Design" TDD for software you may get that all I'm doing is applying the principals of TDD to my infrastructure. Based on your experience and contacts how can I make this idea happen?

  Read the article

• How to implement an intelligent enemy in a shoot-em-up?

  - by bummzack

  Imagine a very simple shoot-em-up, something we all know: You're the player (green). Your movement is restricted to the X axis. Our enemy (or enemies) is at the top of the screen, his movement is also restricted to the X axis. The player fires bullets (yellow) at the enemy. I'd like to implement an A.I. for the enemy that should be really good at avoiding the players bullets. My first idea was to divide the screen into discrete sections and assign weights to them: There are two weights: The "bullet-weight" (grey) is the danger imposed by a bullet. The closer the bullet is to the enemy, the higher the "bullet-weight" (0..1, where 1 is highest danger). Lanes without a bullet have a weight of 0. The second weight is the "distance-weight" (lime-green). For every lane I add 0.2 movement cost (this value is kinda arbitrary now and could be tweaked). Then I simply add the weights (white) and go to the lane with the lowest weight (red). But this approach has an obvious flaw, because it can easily miss local minima as the optimal place to go would be simply between two incoming bullets (as denoted with the white arrow). So here's what I'm looking for: Should find a way through bullet-storm, even when there's no place that doesn't impose a threat of a bullet. Enemy can reliably dodge bullets by picking an optimal (or almost optimal) solution. Algorithm should be able to factor in bullet movement speed (as they might move with different velocities). Ways to tweak the algorithm so that different levels of difficulty can be applied (dumb to super-intelligent enemies). Algorithm should allow different goals, as the enemy doesn't only want to evade bullets, he should also be able to shoot the player. That means that positions where the enemy can fire at the player should be preferred when dodging bullets. So how would you tackle this? Contrary to other games of this genre, I'd like to have only a few, but very "skilled" enemies instead of masses of dumb enemies.

  Read the article

• Why would I learn C++11, having known C and C++?

  - by Shahbaz

  I am a programmer in C and C++, although I don't stick to either language and write a mixture of the two. Sometimes having code in classes, possibly with operator overloading, or templates and the oh so great STL is obviously a better way. Sometimes use of a simple C function pointer is much much more readable and clear. So I find beauty and practicality in both languages. I don't want to get into the discussion of "If you mix them and compile with a C++ compiler, it's not a mix anymore, it's all C++" I think we all understand what I mean by mixing them. Also, I don't want to talk about C vs C++, this question is all about C++11. C++11 introduces what I think are significant changes to how C++ works, but it has introduced many special cases that change how different features behave in different circumstances, placing restrictions on multiple inheritance, adding lambda functions, etc. I know that at some point in the future, when you say C++ everyone would assume C++11. Much like when you say C nowadays, you most probably mean C99. That makes me consider learning C++11. After all, if I want to continue writing code in C++, I may at some point need to start using those features simply because my colleagues have. Take C for example. After so many years, there are still many people learning and writing code in C. Why? Because the language is good. What good means is that, it follows many of the rules to create a good programming language. So besides being powerful (which easy or hard, almost all programming languages are), C is regular and has few exceptions, if any. C++11 however, I don't think so. I'm not sure that the changes introduced in C++11 are making the language better. So the question is: Why would I learn C++11? Update: My original question in short was: "I like C++, but the new C++11 doesn't look good because of this and this and this. However, deep down something tells me I need to learn it. So, I asked this question here so that someone would help convince me to learn it." However, the zealous people here can't tolerate pointing out a flaw in their language and were not at all constructive in this manner. After the moderator edited the question, it became more like a "So, how about this new C++11?" which was not at all my question. Therefore, in a day or too I am going to delete this question if no one comes up with an actual convincing argument. P.S. If you are interested in knowing what flaws I was talking about, you can edit my question and see the previous edits.

  Read the article

• Determining cause of random latency/loading issues

  - by Sherwin Flight

  I'm not sure exactly what details to post in regards to my issue, because I'm not sure what is relevant. Prior to the end of September my websites all loaded quickly, in almost all cases. Loading time wasn't usually more than a few seconds. However, since the end of September I noticed a big increase in page loading times. In some cases pages were taking 30 seconds or more to load. I do have a remote monitoring service monitoring some of the sites as well, and the image below shows the response times over the past month. The response times shown at the beginning of this graph were what the usual response times were prior to this issue occurring. You can see that there has been a significant increase in response times from the beginning to the end of this graph. The thing is, the problem is not happening 100% of the time. If I click through the site, or even just keep refreshing the page, about 25% of the time the pages load quickly, the remaining 75% of the time they load slowly. Sometimes the pages take so long to load that they time out, and don't load at all. I have contacted my hosting provider, and they said things at their end was fine. I don't believe the problem is my home internet provider, because all other websites load without a problem. The server is located in Texas, USA. This also raises another interesting point. My remote monitor checks my site from two locations, California, USA, and London, England. As you can see in the chart below the response time is actually shorter when checked from London, which doesn't seem to make sense, since the server is physically closer to the California monitoring location. I would have expected the London monitoring location to have higher response times since they are physically farther away. I should also point out that in some traceroute test I've done it seem like the first connection to the server seems to take the longest, then after that the rest of the page loads quickly. Below is a little chart showing the times for the first connection to the server. So, what could be causing this problem, and what steps can I take to resolve it or at least narrow down the problem? Sending the request to the server was very quick, and receiving the reply back seems pretty quick, but the WAIT time is really long. So it connects, sends the request, but then waits close to 30 seconds before it starts receiving data back. I am also aware that there are things I can do to speed up page loading times, like reducing the number of css/js files used on a page, compressing images, etc. This is not really what the source of the problem is though, because nothing has really changed on the site since before the problem started, and other sites on the same server are loading slowly as well. Any help or advice is much appreciated.

  Read the article

• Best Practices for High Volume CPA Import Operations with ebXML in B2B 11g

  - by Shub Lahiri, A-Team

  Background B2B 11g supports ebXML messaging protocol, where multiple CPAs can be imported via command-line utilities.  This note highlights one aspect of the best practices for import of CPA, when large numbers of CPAs in the excess of several hundreds are required to be maintained within the B2B repository. Symptoms The import of CPA usually is a 2-step process, namely creating a soa.zip file using b2bcpaimport utility based on a CPA properties file and then using b2bimport to import the b2b repository.  The commands are provided below: ant -f ant-b2b-util.xml b2bcpaimport -Dpropfile="<Path to cpp_cpa.properties>" -Dstandard=true ant -f ant-b2b-util.xml b2bimport -Dlocalfile=true -Dexportfile="<Path to soa.zip>" -Doverwrite=true Usually the first command completes fairly quickly regardless of the number of CPAs in the repository. However, as the number of trading partners within the repository goes up, the time to complete the second command could go up to ~30 secs per operation. So, this could add up to a significant amount, if there is a need to import hundreds of CPA in a production system within a limited downtime, maintenance window.  Remedy In situations, where there is a large number of entries to be imported, it is best to setup a staging environment and go through the import operation of each individual CPA in an empty repository. Since, this will be done in an empty repository, the time taken for completion should be reasonable.  After all the partner profiles have been imported, a full repository export can be taken to capture the metadata for all the entries in one file.  If this single file with all the partner entries is imported in a loaded repository, the total time taken for import of all the CPAs should see a dramatic reduction. Results Let us take a look at the numbers to see the benefit of this approach. With a pre-loaded repository of ~400 partners, the individual import time for each entry takes ~30 secs. So, if we had to import another 100 partners, the individual entries will take ~50 minutes (100 times ~30 secs). On the other hand, if we prepare the repository export file of the same 100 partners from a staging environment earlier, the import takes about ~5 mins. The total processing time for the loading of metadata, specially in a production environment, can thus be shortened by almost a factor of 10. Summary The following diagram summarizes the entire approach and process. Acknowledgements The material posted here has been compiled with the help from B2B Engineering and Product Management teams.

  Read the article

• What kind of position matches my skills, experience and interests? [closed]

  - by Ryan

  I work in a large firm and my current job covers a variety of different duties. Due to several factors I am seriously considering finding a new job (hours, pay-cut, limited career growth). I have worked for the company nearly 4 years and almost 2 years ago I transitioned into more of a business analyst role (previously I was working in a client facing role for our audit group). In this role I have overseen all aspects of the development of a large scale re-platforming of our firm's key tool in analyzing investment portfolios. I gathered requirements, wrote specs, designed the UI and functionality, worked closely with developers (onshore and offshore) to see to it the implementation was correct, managed schedules and was the lead tester. This is a large scale system used by thousands of people around the world. I've also written Excel macros, reports in SQL, given trainings, written technical manuals, interfaced with senior managers and partners, etc. I've been on a couple interviews sporadically, most of which were for positions aimed at higher management consulting type positions, dealing with strategy, overall process management, project management, etc. What really interests me is the technical stuff and overseeing a project from beginning to end (although I would rather not have to do so many of the tasks on my own). I genuinely like a lot of what I do, but the company culture and attitude towards overworking people combined with my recent pay-cut (my overtime was cut due to a promotion to a higher level) has lead me to want to seek work elsewhere. The problem is - what type of work could I realistically do? I feel like traditional business analysis is too much business and not enough tech stuff, and I've really taken a shine lately to beefing up my programming abilities and creating small programs to automate things around work. I also feel that because my actual years of experience as a business analyst (figure 1.5 years realistically) puts me at a junior level doing a lot of grunt requirements gathering, when the work that I have been doing with my current company is more in line with what a Program Manager does (depending on your definition I guess). So in reality, when I'm job hunting I get a bit perplexed because I feel like the traditional BA stuff wouldn't really suit me, and even if it did it's usually something along the lines of 5-10 years experience for the type of work that is similar to what I've done (and I've also found most BA jobs to be contract only which at the moment I'm not too keen on). Program Manager is something that interests me, but again I feel like the experience is lacking because that's a much more senior position. Am I in some kind of career no-man's land? Any idea what would best suit me given my experience and abilities, as well as my interests? I plan to keep learning programming on the side, but don't expect to get a job being a straight programmer given my relative inexperience with programming.

  Read the article

• How granular should a command be in a CQ[R]S model?

  - by Aaronaught

  I'm considering a project to migrate part of our WCF-based SOA over to a service bus model (probably nServiceBus) and using some basic pub-sub to achieve Command-Query Separation. I'm not new to SOA, or even to service bus models, but I confess that until recently my concept of "separation" was limited to run-of-the-mill database mirroring and replication. Still, I'm attracted to the idea because it seems to provide all the benefits of an eventually-consistent system while sidestepping many of the obvious drawbacks (most notably the lack of proper transactional support). I've read a lot on the subject from Udi Dahan who is basically the guru on ESB architectures (at least in the Microsoft world), but one thing he says really puzzles me: As we get larger entities with more fields on them, we also get more actors working with those same entities, and the higher the likelihood that something will touch some attribute of them at any given time, increasing the number of concurrency conflicts. [...] A core element of CQRS is rethinking the design of the user interface to enable us to capture our users’ intent such that making a customer preferred is a different unit of work for the user than indicating that the customer has moved or that they’ve gotten married. Using an Excel-like UI for data changes doesn’t capture intent, as we saw above. -- Udi Dahan, Clarified CQRS From the perspective described in the quotation, it's hard to argue with that logic. But it seems to go against the grain with respect to SOAs. An SOA (and really services in general) are supposed to deal with coarse-grained messages so as to minimize network chatter - among many other benefits. I realize that network chatter is less of an issue when you've got highly-distributed systems with good message queuing and none of the baggage of RPC, but it doesn't seem wise to dismiss the issue entirely. Udi almost seems to be saying that every attribute change (i.e. field update) ought to be its own command, which is hard to imagine in the context of one user potentially updating hundreds or thousands of combined entities and attributes as it often is with a traditional web service. One batch update in SQL Server may take a fraction of a second given a good highly-parameterized query, table-valued parameter or bulk insert to a staging table; processing all of these updates one at a time is slow, slow, slow, and OLTP database hardware is the most expensive of all to scale up/out. Is there some way to reconcile these competing concerns? Am I thinking about it the wrong way? Does this problem have a well-known solution in the CQS/ESB world? If not, then how does one decide what the "right level" of granularity in a Command should be? Is there some "standard" one can use as a starting point - sort of like 3NF in databases - and only deviate when careful profiling suggests a potentially significant performance benefit? Or is this possibly one of those things that, despite several strong opinions being expressed by various experts, is really just a matter of opinion?

  Read the article

• My co-worker has not been doing such a good job for the past decade. What do I do? [closed]

  - by stijn

  Possible Duplicate: How do I approach a coworker about his or her code quality? I started working with him almost a decade ago and back then I had never really programmed before, being a young hardware engineer. Right now however I have made quite some progress in all areas being part of software design and i am much, much more skilled than my co-worker who is 15 years older and has been programming more than twice as long. He is super nice and definitely smart enough, but lately his lack of skill and performance are starting to drag me down because we're more and more working on the same codebase. And soon we are going to do a quite ambitious start from scratch creating a whole new hard/software system. I feel it is time to address all issues now, but i do not know how to start. Here are some of the things that I would like to see him improve on: no consistent usage of style, spaces nor tabs (eg if(something ) a =b ) adds newlines around pieces of code to make it easier to read, then commits those with messages like 'no changes made' overall commit messages are useless and so are most of the comments, if there are any (eg 'remove solves for bug Rik' if Rik reported a bug). There is no function/class documentation. lots of spelling errors, in both English and native language, which sometimes are mixed 6/7/8 level deep deep nesting is no exception, a lot of functions start with one level already like if(ptr!=Null){ even when ptr is the result of allocation via new in the constructor numerous source files have over 10k lines of those lines, a major part is simply a result of copy-pasting functionality instead of using a function. This includes copying comments so we end up with 50 occurrences of var=NULL; //TODO TEST this!!!!!!! another part is hundreds of lines of dead code knows what versioning does, yet comments out old code and places new code underneath it when making changes coding skills are below par, especially for the type of rather high precision applications we do. Yet somehow, after a lot of trying and testing, stuff starts to work. But then breaks again some time later because every change casues a waterfall effect. violates every single item in the C++ FAQ lite, practices every bad practice I can think of still doesn't know how to properly use the debugger, but spends hours inspecting messy logfiles in notepad on a tiny laptop screen. Does not make any adjustments to the settings of the software he uses. Never uses keyboard shortcuts. does not seem to progress or learn new things at all. Work rather slow, mostly due to the lack of planning and incorrect usage of tools. How does one deal with this? For starters, how do I make him aware of all these problems? Should I tell the staff about it? And the next step, how to get him to learn new things and adopt another way of working?

  Read the article

• Lenovo Thinkpad X1 Carbon support

  - by Robottinosino

  I am considering selling my Mac to get money towards a Lenovo Thinkpad X1 because what I really want to do is to be running an Ubuntu system all the time. Is this machine completely supported in Ubuntu, with no tiny little feature missing just because I am "going Linux"? Optional user story section, skip to the question below if you don't have time: I have a friend who bought a "works on Ubuntu" system a year ago and has hated the fact ever since: battery lasts less than if he boots in Windows (which he despises) and he ascribes that to "no good OS/harware integration and support for advanced chipset power management features", odd behaviour on suspend/resume/hibernate (says: "when it works 90% of the time and the other 10% it makes you lose your work is as good as broken - 90% is the same as 0% he says), some occasional graphics card glitches he can perfectly well live with and has almost grown affectionate to, and finally, and that is what would make him undo his choice if he could, bad "input device drivers". He says: trackpoint and trackpad just "feel different", "so much better" on Windows and that was impossible to know from the website brochure. That story makes me very doubtful... but I want to abandon this "walled garden" of prison that is my Mac and go Ubuntu all the way, no doubt about that! My dilemma at this time is just: "I don't want to live with those eternal frustrations for sure"! Here's a directly answerable phrasing of my question: Is the Lenovo Thinkpad X1 supported on Ubuntu? Yes/no, which version? Which hardware features are not supported? Provide a list Optionally: sort the list in descending order of frustration from your experience Optionally: mention if there are acceptable workarounds to the "out-of-the-box" condition described in the earlier points and whether this ameliorates frustration at least to "tolerable" levels Comment: the Ubuntu hardware certification page is so not-for-end-users it's unreal. Whoa. What would make it end-user friendly is: Link to "buy here and you'll be just fine, this is the right configuration for you, it'll work as long as you press BUY on that page and don't browse further" Remove mentions of may and might not work. Just tell it straight: press buy here and you will get a working system with the exception of A, B, C (so that I can decide whether the philosophical "freedom pleasure" I get from escaping an Apple world is enough to off-balance the loss, for instance, of Bluetooth capabilities (something that I of course use on my Mac) but "could" lose to use free (as in freedom) software The certification page fails to dispel doubts in me as an end-user. I don't feel "eased into Ubuntu", I feel "partially informed".

  Read the article

• So, I though I wanted to learn frontend/web development and break out of my comfort zone...

  - by ripper234

  I've been a backend developer for a long time, and I really swim in that field. C++/C#/Java, databases, NoSql, caching - I feel very much at ease around these platforms/concepts. In the past few years, I started to taste end-to-end web programming, and recently I decided to take a job offer in a front end team developing a large, complex product. I wanted to break out of my comfort zone and become more of an "all around developer". Problem is, I'm getting more and more convinced I don't like it. Things I like about backend programming, and missing in frontend stuff: More interesting problems - When I compare designing a server that handle massive data, to adding another form to a page or changing the validation logic, I find the former a lot more interesting. Refactoring refactoring refactoring - I am addicted to Visual Studio with Resharper, or IntelliJ. I feel very comfortable writing code as it goes without investing too much thought, because I know that with a few clicks I can refactor it into beautiful code. To my knowledge, this doesn't exist at all in javascript. Intellisense and navigation - I hate looking at a bunch of JS code without instantly being able to know what it does. In VS/IntelliJ I can summon the documentation, navigate to the code, climb up inheritance hiererchies ... life is sweet. Auto-completion - Just hit Ctrl-Space on an object to see what you can do with it. Easier to test - With almost any backend feature, I can use TDD to capture the requirements, see a bunch of failing tests, then implement, knowing that if the tests pass I did my job well. With frontend, while tests can help a bit, I find that most of the testing is still manual - fire up that browser and verify the site didn't break. I miss that feeling of "A green CI means everything is well with the world." Now, I've only seriously practiced frontend development for about two months now, so this might seem premature ... but I'm getting a nagging feeling that I should abandon this quest and return to my comfort zone, because, well, it's so comfy and fun. Another point worth mentioning in this context is that while I am learning some frontend tools, a lot of what I'm learning is our company's specific infrastructure, which I'm not sure will be very useful later on in my career. Any suggestions or tips? Do you think I should give frontend programming "a proper chance" of at least six to twelve months before calling it quits? Could all my pains be growing pains, and will they magically disappear as I get more experienced? Or is gaining this perspective is valuable enough, even if plan to do more "backend stuff" later on, that it's worth grinding my teeth and continuing with my learning?

  Read the article

• ClearTrace Performance on 170GB of Trace Files

  - by Bill Graziano

  I’ve always worked to make ClearTrace perform well.  That’s probably because I spend so much time watching it work.  I’m often going through two or three gigabytes of trace files but I rarely get the chance to run it on a really large set of files. One of my clients wanted to run a full trace for a week and then analyze the results.  At the end of that week we had 847 200MB trace files for a total of nearly 170GB. I regularly use 200MB trace files when I monitor production systems.  I usually get around 300,000 statements in a file that size if it’s mostly stored procedures.  So those 847 trace files contained roughly 250 million statements.  (That’s 730 bytes per statement if you’re keeping track.  Newer trace files have some compression in them but I’m not exactly sure what they’re doing.)  On a system running 1,000 statements per second I get a new file every five minutes or so. It took 27 hours to process these files on an older development box.  That works out to 1.77MB/second.  That means ClearTrace processed about 2,654 statements per second. You can query the data while you’re loading it but I’ve found it works better to use a second instance of ClearTrace to do this.  I’m not sure why yet but I think there’s still some dependency between the two processes. ClearTrace is almost always CPU bound.  It’s really just a huge, ugly collection of regular expressions.  It only writes a summary to its database at the end of each trace file so that usually isn’t a bottleneck.  At the end of this process, the executable was using roughly 435MB of RAM.  Certainly more than when it started but I think that’s acceptable. The database where all this is stored started out at 100MB.  After processing 170GB of trace files the database had grown to 203MB.  The space savings are due to the “datawarehouse-ish” design and only storing a summary of each trace file. You can download ClearTrace for SQL Server 2008 or test out the beta version for SQL Server 2012.  Happy Tuning!

  Read the article

• Switch from back-end to front-end programming: I'm out of my comfort zone, should I switch back?

  - by ripper234

  I've been a backend developer for a long time, and I really swim in that field. C++/C#/Java, databases, NoSql, caching - I feel very much at ease around these platforms/concepts. In the past few years, I started to taste end-to-end web programming, and recently I decided to take a job offer in a front end team developing a large, complex product. I wanted to break out of my comfort zone and become more of an "all around developer". Problem is, I'm getting more and more convinced I don't like it. Things I like about backend programming, and missing in frontend stuff: More interesting problems - When I compare designing a server that handle massive data, to adding another form to a page or changing the validation logic, I find the former a lot more interesting. Refactoring refactoring refactoring - I am addicted to Visual Studio with Resharper, or IntelliJ. I feel very comfortable writing code as it goes without investing too much thought, because I know that with a few clicks I can refactor it into beautiful code. To my knowledge, this doesn't exist at all in javascript. Intellisense and navigation - I hate looking at a bunch of JS code without instantly being able to know what it does. In VS/IntelliJ I can summon the documentation, navigate to the code, climb up inheritance hiererchies ... life is sweet. Auto-completion - Just hit Ctrl-Space on an object to see what you can do with it. Easier to test - With almost any backend feature, I can use TDD to capture the requirements, see a bunch of failing tests, then implement, knowing that if the tests pass I did my job well. With frontend, while tests can help a bit, I find that most of the testing is still manual - fire up that browser and verify the site didn't break. I miss that feeling of "A green CI means everything is well with the world." Now, I've only seriously practiced frontend development for about two months now, so this might seem premature ... but I'm getting a nagging feeling that I should abandon this quest and return to my comfort zone, because, well, it's so comfy and fun. Another point worth mentioning in this context is that while I am learning some frontend tools, a lot of what I'm learning is our company's specific infrastructure, which I'm not sure will be very useful later on in my career. Any suggestions or tips? Do you think I should give frontend programming "a proper chance" of at least six to twelve months before calling it quits? Could all my pains be growing pains, and will they magically disappear as I get more experienced? Or is gaining this perspective is valuable enough, even if plan to do more "backend stuff" later on, that it's worth grinding my teeth and continuing with my learning?

  Read the article

• Professional immigration

  - by etranger

  Hello all, Does anyone here have a practical advice on professional relocation from Russia to Europe? The reasons behind making such a decision are far beyond the subject, perhaps, so I'll stick to the practical part. Having done some of the "common stuff" for finding a job, I am now facing two serious problems: I am a "dual-class" person, with university degree in marketing, and multiple years of self-studied computer competence (hence my writing here). Have professional experience in both areas. I don't currently hold a European work permit. From what I can see, this results in normal HR person throwing out my CV as either being "overqualified" or "too much trouble with making the permit". I do have the skills and character to start my own business, but it requires start-up capital that I don't have, over the last years I had to pay high bills for medical treatment of my family member, who had deceased. Now, I'm almost out of debts. As you can probably guess, English is not a problem, and I'm open to new languages, but first steps of entering the market, or the society, is the problematic part. I live close to Norway, and am trying to get some professional contacts there, but it hasn't got me any practical perspective so far. Any advice is greatly appreciated. EDIT: I am currently making my living off web site development, and occasional consulting services both in IT and marketing. For purely geographic reasons I'm dealing with clients that reside in the same city where I live, pop. 350 000. Being quite local, market requirements for web sites are simple and stable — clients need to control navigation, write articles in a word-like editor, upload illustrations and place ad banners, all with no additional programming. As many web developers do, I'm using my own content management system that fits these expectations. I have also started developing a newer version of this system that has better support for international environments, but I'm too distant from the real market demand in Europe to speak of the right track here. Technically it's based on php/mysql and uses xslt for templating. It allows for quick website deployment, and has architectural neatness, lack of which made me abandon similar opensource solutions (Joomla and the like). Deploying time from rasterized design proofs is normally under 6-8 working hours, don't know how that compares to the world practice. EDIT 2: Can anyone share what Norwegian (Scandinavian) web solutions market currently demands?

  Read the article

• Inherit one instance variable from the global scope

  - by Julian

  I'm using Curses to create a command line GUI with Ruby. Everything's going well, but I have hit a slight snag. I don't think Curses knowledge (esoteric to be fair) is required to answer this question, just Ruby concepts such as objects and inheritance. I'm going to explain my problem now, but if I'm banging on, just look at the example below. Basically, every Window instance needs to have .close called on it in order to close it. Some Window instances have other Windows associated with it. When closing a Window instance, I want to be able to close all of the other Window instances associated with it at the same time. Because associated Windows are generated in a logical fashion, (I append the name with a number: instance_variable_set(self + integer, Window.new(10,10,10,10)) ), it's easy to target generated windows, because methods can anticipate what assosiated windows will be called, (I can recreate the instance variable name from scratch, and almost query it: instance_variable_get(self + integer). I have a delete method that handles this. If the delete method is just a normal, global method (called like this: delete_window(@win543) then everything works perfectly. However, if the delete method is an instance method, which it needs to be in-order to use the self keyword, it doesn't work for a very clear reason; it can 'query' the correct instance variable perfectly well (instance_variable_get(self + integer)), however, because it's an instance method, the global instances aren't scoped to it! Now, one way around this would obviously be to simply make a global method like this: delete_window(@win543). But I have attributes associated with my window instances, and it all works very elegantly. This is very simplified, but it literally translates the problem exactly: class Dog def speak woof end end def woof if @dog_generic == nil puts "@dog_generic isn't scoped when .woof is called from a class method!\n" else puts "@dog_generic is scoped when .woof is called from the global scope. See:\n" + @dog_generic end end @dog_generic = "Woof!" lassie = Dog.new lassie.speak #=> @dog_generic isn't scoped when .woof is called from an instance method!\n woof #=> @dog_generic is scoped when .woof is called from the global scope. See:\nWoof! TL/DR: I need lassie.speak to return this string: "@dog_generic is scoped when .woof is called from the global scope. See:\nWoof!" @dog_generic must remain as an insance variable. The use of Globals or Constants is not acceptable. Could woof inherit from the Global scope? Maybe some sort of keyword: def woof < global # This 'code' is just to conceptualise what I want to do, don't take offence! end Is there some way the .woof method could 'pull in' @dog_generic from the global scope? Will @dog_generic have to be passed in as a parameter?

  Read the article

• Multithreading in lwjgl getting rid of sleep.

  - by pangaea

  I'm trying to use multithreading in my game. However, I can't seem to get rid of the sleep. If I don't it's a blank screen, as there is no time for the computer to actually render the triangleMob as it can't access getArrayList(), in my main class I have a TriangleMob arraylist. If I delay it, then it can access the previousMob and it renders. If I don't, then it's blank screen. Can I get rid of the delay? Also, is this a bad way to multithread? Surely, this should be fast. I need multithreading so can you please not suggest not using it. public class TriangleMob extends Thread implements Runnable { private static int count=0; private int objectDisplayList; private static ArrayList<TriangleMob> previousMob = new ArrayList<TriangleMob>(); private static ArrayList<TriangleMob> currentMob = new ArrayList<TriangleMob>(); private static ArrayList<TriangleMob> laterMob = new ArrayList<TriangleMob>(); private Vector3f position = new Vector3f(0f,0f,0f); private Vector3f movement = new Vector3f(0f,0f,0f); public TriangleMob() { // Create the display list CreateDisplayList(); count++; } public TriangleMob(Vector3f position) { // Create the display list CreateDisplayList(); this.position = position; count++; } private void CreateDisplayList() { objectDisplayList = glGenLists(1); glNewList(objectDisplayList, GL_COMPILE); { double topPoint = 0.75; glBegin(GL_TRIANGLES); glColor4f(1, 1, 0, 1f); glVertex3d(0, topPoint, -5); glColor4f(0, 0, 1, 1f); glVertex3d(-1, -0.75, -4); glColor4f(0, 0, 1, 1f); glVertex3d(1, -.75, -4); glColor4f(1, 1, 0, 1f); glVertex3d(0, topPoint, -5); glColor4f(0, 0, 1, 1f); glVertex3d(1, -0.75, -4); glColor4f(0, 0, 1, 1f); glVertex3d(1, -0.75, -6); glColor4f(1, 1, 0, 1f); glVertex3d(0, topPoint, -5); glColor4f(0, 0, 1, 1f); glVertex3d(1, -0.75, -6); glColor4f(0, 0, 1, 1f); glVertex3d(-1, -.75, -6); glColor4f(1, 1, 0, 1f); glVertex3d(0, topPoint, -5); glColor4f(0, 0, 1, 1f); glVertex3d(-1, -0.75, -6); glColor4f(0, 0, 1, 1f); glVertex3d(-1, -.75, -4); glEnd(); glColor4f(1, 1, 1, 1); } glEndList(); } public static int getCount() { return count; } public Vector3f getMovement() { return movement; } public Vector3f getPosition() { return position; } public synchronized int getObjectList() { return objectDisplayList; } public synchronized static ArrayList<TriangleMob> getArrayList(){ if(previousMob != null) { return previousMob; } previousMob.add(new TriangleMob()); return previousMob; } public synchronized void move(Vector3f movement) { // If you want to move in all 3 axis position.x += movement.x; position.y += movement.y; position.z += movement.z; } public synchronized void render() { glPushMatrix(); glTranslatef(-position.x, -position.y, -position.z); glCallList(objectDisplayList); glPopMatrix(); } public synchronized static void setTriangleMob(ArrayList<TriangleMob> triangleMobSet) { laterMob = triangleMobSet; } private synchronized void setPreTriangleMob(ArrayList<TriangleMob> currentMob2) { previousMob = currentMob2; } public void run(){ while(true) { if(laterMob == null) { currentMob = laterMob; System.out.println("Copying"); } for(int i=0; i<currentMob.size(); i++) { currentMob.get(i).move(new Vector3f(0.1f,0.01f,0.01f)); } setPreTriangleMob(currentMob); try { sleep(1L); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); } } } }

  Read the article

• Does it make the game more fun when the user is forced to progress thru the levels sequentially rather than letting them pick and play?

  - by BeachRunnerJoe

  Hello. For the first time in my game, I'm stuck with a real design dilemma. I guess that's a good thing ;) I'm building a word puzzle game that has five levels, each with 30 puzzles. Currently, the user has to solve one puzzle at a time before moving to the next. However, I'm finding the user occasionally gets stuck on a puzzle, at which point they can no longer play until they solve it. This is obviously bad because many people will just quit playing the game and delete the app since they get frustrated and can't play any other puzzles until the current puzzle is solved. The only elegant solution I can find to helping the player get unstuck is changing the design of the game to allow the users to pick any puzzle to play at any time. This way, if they get stuck, they can come back to it later and at least they have other puzzles to play in the meantime. It's my opinion, however, that this new flow design doesn't make the game as fun as the original flow design where the player has to complete a puzzle before moving to the next. To me, it's like anything else, when you only have one of something, it's more enjoyable, but when you have 30 of something, it's far less enjoyable. In fact, when I present the user with 30 puzzles to choose from that they need to solve before unlocking the next level, it almost seems as tho I'm making them feel like it's work they have to do. I even had a tester voluntarily tell me that being forced to complete a puzzle before moving to the next is more motivating. My questions are... Do you agree/disagree? Do you have any suggestions for how I can help the player get unstuck? Thanks so much in advance for your thoughts! EDIT: I should mention that I've already considered a few other solutions to helping the user get unstuck, but none of them seem like good ideas. They are... Add more hints: Currently, the user gets two hints per puzzle. If I increase the hint count, it only makes the game more easy and still leaves the possibility of the user getting stuck. Add a "Show Solution" button: This seems like a bad idea because it's my opinion this takes the fun out of the game for many people who would probably otherwise solve the puzzle if they didn't have the quick option to see the solution.

  Read the article

• Why is everything crashing?

  - by Kopkins

  I've been using Ubuntu for a while now and I love it, I wouldn't think of using another OS unless I can't fix this issue. The install I'm on is only around a month and a half old. I'm running 12.04 64bit on a 8,1 MBP. Up until around 2 weeks ago everything was running smoothly. Around then applications started crashing and weird things started happening. At first I thought it was just certain applications. The first thing to start giving me trouble was compiz. Occasionally compiz will stop decorating windows and lost many other functionalities. running compiz --replace fixes this, but I don't feel like doing it usually once a day. The other thing with this is that after running compiz --replace, my conky window gets lost somewhere and so I run killall conky && conky -c .conkyrc. But this isn't with just a couple applications, it seems like it is proliferating through my system. Last week fontforge started crashing while doing whatever task. So I ended up unable to finish what I was working on to completeness. Didn't find a fix. Today rhythmbox started crashing. Whenever I try to play anything, Rhythmbox becomes unresponsive and needs to be forced to close. When I try to do certain things with the disk utility, it crashes. I get the Ubuntu has experienced an internal error message much more often than I would like. Frequently applications stop appearing in the launcher. Wine almost never does anymore. After not being active for a little while, thunderbird can only fetch my mail after restarting wireless, sudo rmmod b43 && sudo modprobe b43 Occasionally some of my startup apps don't start. What is my best option here? Could they be bugs? I don't want to submit a ton of vague bug reports. Reinstall? switch OS? Thank you to anyone who responds. Kopkins

  Read the article

• Help with calculation to steer ship in 3d space

  - by Aaron Anodide

  I'm a beginner using XNA to try and make a 3D Asteroids game. I'm really close to having my space ship drive around as if it had thrusters for pitch and yaw. The problem is I can't quite figure out how to translate the rotations, for instance, when I pitch forward 45 degrees and then start to turn - in this case there should be rotation being applied to all three directions to get the "diagonal yaw" - right? I thought I had it right with the calculations below, but they cause a partly pitched forward ship to wobble instead of turn.... :( Here's current (almost working) calculations for the Rotation acceleration: float accel = .75f; // Thrust +Y / Forward if (currentKeyboardState.IsKeyDown(Keys.I)) { this.ship.AccelerationY += (float)Math.Cos(this.ship.RotationZ) * accel; this.ship.AccelerationX += (float)Math.Sin(this.ship.RotationZ) * -accel; this.ship.AccelerationZ += (float)Math.Sin(this.ship.RotationX) * accel; } // Rotation +Z / Yaw if (currentKeyboardState.IsKeyDown(Keys.J)) { this.ship.RotationAccelerationZ += (float)Math.Cos(this.ship.RotationX) * accel; this.ship.RotationAccelerationY += (float)Math.Sin(this.ship.RotationX) * accel; this.ship.RotationAccelerationX += (float)Math.Sin(this.ship.RotationY) * accel; } // Rotation -Z / Yaw if (currentKeyboardState.IsKeyDown(Keys.K)) { this.ship.RotationAccelerationZ += (float)Math.Cos(this.ship.RotationX) * -accel; this.ship.RotationAccelerationY += (float)Math.Sin(this.ship.RotationX) * -accel; this.ship.RotationAccelerationX += (float)Math.Sin(this.ship.RotationY) * -accel; } // Rotation +X / Pitch if (currentKeyboardState.IsKeyDown(Keys.F)) { this.ship.RotationAccelerationX += accel; } // Rotation -X / Pitch if (currentKeyboardState.IsKeyDown(Keys.D)) { this.ship.RotationAccelerationX -= accel; } I'm combining that with drawing code that does a rotation to the model: public void Draw(Matrix world, Matrix view, Matrix projection, TimeSpan elsapsedTime) { float seconds = (float)elsapsedTime.TotalSeconds; // update velocity based on acceleration this.VelocityX += this.AccelerationX * seconds; this.VelocityY += this.AccelerationY * seconds; this.VelocityZ += this.AccelerationZ * seconds; // update position based on velocity this.PositionX += this.VelocityX * seconds; this.PositionY += this.VelocityY * seconds; this.PositionZ += this.VelocityZ * seconds; // update rotational velocity based on rotational acceleration this.RotationVelocityX += this.RotationAccelerationX * seconds; this.RotationVelocityY += this.RotationAccelerationY * seconds; this.RotationVelocityZ += this.RotationAccelerationZ * seconds; // update rotation based on rotational velocity this.RotationX += this.RotationVelocityX * seconds; this.RotationY += this.RotationVelocityY * seconds; this.RotationZ += this.RotationVelocityZ * seconds; Matrix translation = Matrix.CreateTranslation(PositionX, PositionY, PositionZ); Matrix rotation = Matrix.CreateRotationX(RotationX) * Matrix.CreateRotationY(RotationY) * Matrix.CreateRotationZ(RotationZ); model.Root.Transform = rotation * translation * world; model.CopyAbsoluteBoneTransformsTo(boneTransforms); foreach (ModelMesh mesh in model.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.World = boneTransforms[mesh.ParentBone.Index]; effect.View = view; effect.Projection = projection; effect.EnableDefaultLighting(); } mesh.Draw(); } }

  Read the article

• SQL Saturday 43 (Redmond, WA) Review

  - by BuckWoody

  Last Saturday (June 12th) we held a “SQL Saturday” (more about those here) event in Redmond, Washington. The event was held at the Microsoft campus, at the Mixer in our new location called the “Commons”. This is a mall-like area that we have on campus, and the Mixer is a large building with lots of meeting rooms, so it made a perfect location for the event. There was a sign to find the parking, and once there they had a sign to show how to get to the building. Since it’s a secure facility, Greg Larsen and crew had a person manning the door so that even late arrivals could get in. We had about 400 sign up for the event, and a little over 300 attend (official numbers later). I think we would have had a lot more, but the sun was out – and you just can’t underestimate the effect of that here in the Pacific Northwest. We joke a lot about not seeing the sun much, but when a day like what we had on Saturday comes around, and on a weekend at that, you’d cancel your wedding to go outside to play in the sun. And your spouse would agree with you for doing it. We had some top-notch speakers, including Clifford Dibble and Kalen Delany. The food was great, we had multiple sponsors (including Confio who seems to be at all of these) and the attendees were from all over the professional spectrum, from developers to BI to DBA’s. Everyone I saw was very engaged, and when I visited room-to-room I saw almost no one in the halls – everyone was in the sessions. I also saw a much larger Microsoft presence this year, especially from Dan Jones’ team. I had a great turnout at my session, and yes, I was wearing an Oracle staff shirt. I did that because I wanted to show that the session I gave on “SQL Server for the Oracle DBA” was non-marketing – I couldn’t exactly bash Oracle wearing their colors! These events are amazing. I can’t emphasize enough how much I appreciate the volunteers and how much work they put into these events, and to you for coming. If you’re reading this and you haven’t attended one yet, definitely find out if there is one in your area – and if not, start one. It’s a lot of work, but it’s totally worth it.       Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• How to cleanly add after-the-fact commits from the same feature into git tree

  - by Dennis

  I am one of two developers on a system. I make most of the commits at this time period. My current git workflow is as such: there is master branch only (no develop/release) I make a new branch when I want to do a feature, do lots of commits, and then when I'm done, I merge that branch back into master, and usually push it to remote. ...except, I am usually not done. I often come back to alter one thing or another and every time I think it is done, but it can be 3-4 commits before I am really done and move onto something else. Problem The problem I have now is that .. my feature branch tree is merged and pushed into master and remote master, and then I realize that I am not really done with that feature, as in I have finishing touches I want to add, where finishing touches may be cosmetic only, or may be significant, but they still belong to that one feature I just worked on. What I do now Currently, when I have extra after-the-fact commits like this, I solve this problem by rolling back my merge, and re-merging my feature branch into master with my new commits, and I do that so that git tree looks clean. One clean feature branch branched out of master and merged back into it. I then push --force my changes to origin, since my origin doesn't see much traffic at the moment, so I can almost count that things will be safe, or I can even talk to other dev if I have to coordinate. But I know it is not a good way to do this in general, as it rewrites what others may have already pulled, causing potential issues. And it did happen even with my dev, where git had to do an extra weird merge when our trees diverged. Other ways to solve this which I deem to be not so great Next best way is to just make those extra commits to the master branch directly, be it fast-forward merge, or not. It doesn't make the tree look as pretty as in my current way I'm solving this, but then it's not rewriting history. Yet another way is to wait. Maybe wait 24 hours and not push things to origin. That way I can rewrite things as I see fit. The con of this approach is time wasted waiting, when people may be waiting for a fix now. Yet another way is to make a "new" feature branch every time I realize I need to fix something extra. I may end up with things like feature-branch feature-branch-html-fix, feature-branch-checkbox-fix, and so on, kind of polluting the git tree somewhat. Is there a way to manage what I am trying to do without the drawbacks I described? I'm going for clean-looking history here, but maybe I need to drop this goal, if technically it is not a possibility.

  Read the article

• The design of a generic data synchronizer, or, an [object] that does [actions] with the aid of [helpers]

  - by acheong87

  I'd like to create a generic data-source "synchronizer," where data-source "types" may include MySQL databases, Google Spreadsheets documents, CSV files, among others. I've been trying to figure out how to structure this in terms of classes and interfaces, keeping in mind (what I've read about) composition vs. inheritance and is-a vs. has-a, but each route I go down seems to violate some principle. For simplicity, assume that all data-sources have a header-row-plus-data-rows format. For example, assume that the first rows of Google Spreadsheets documents and CSV files will have column headers, a.k.a. "fields" (to parallel database fields). Also, eventually, I would like to implement this in PHP, but avoiding language-specific discussion would probably be more productive. Here's an overview of what I've tried. Part 1/4: ISyncable class CMySQL implements ISyncable GetFields() // sql query, pdo statement, whatever AddFields() RemFields() ... _dbh class CGoogleSpreadsheets implements ISyncable GetFields() // zend gdata api AddFields() RemFields() ... _spreadsheetKey _worksheetId class CCsvFile implements ISyncable GetFields() // read from buffer AddFields() RemFields() ... _buffer interface ISyncable GetFields() AddFields($field1, $field2, ...) RemFields($field1, $field2, ...) ... CanAddFields() // maybe the spreadsheet is locked for write, or CanRemFields() // maybe no permission to alter a database table ... AddRow() ModRow() RemRow() ... Open() Close() ... First Question: Does it make sense to use an interface, as above? Part 2/4: CSyncer Next, the thing that does the syncing. class CSyncer __construct(ISyncable $A, ISyncable $B) Push() // sync A to B Pull() // sync B to A Sync() // Push() and Pull() only differ in direction; factor. // Sync()'s job is to make sure that the fields on each side // match, to add fields where appropriate and possible, to // account for different column-orderings, etc., and of // course, to add and remove rows as necessary to sync. ... _A _B Second Question: Does it make sense to define such a class, or am I treading dangerously close to the "Kingdom of Nouns"? Part 3/4: CTranslator? ITranslator? Now, here's where I actually get lost, assuming the above is passable. Sometimes, two ISyncables speak different "dialects." For example, believe it or not, Google Spreadsheets (accessed through the Google Data API "list feed") returns column headers lower-cased and stripped of all spaces and symbols! That is, sys_TIMESTAMP is systimestamp, as far as my code can tell. (Yes, I am aware that the "cell feed" does not strip the name so; however cell-by-cell manipulation is too slow for what I'm doing.) One can imagine other hypothetical examples. Perhaps even the data itself can be in different "dialects." But let's take it as given for now, and not argue this if possible. Third Question: How would you implement "translation"? Note: Taking all this as an exercise, I'm more interested in the "idealized" design, rather than the practical one. (God knows that shipped sailed when I began this project.) Part 4/4: Further Thought Here's my train of thought to demonstrate I've thunk, albeit unfruitfully: First, I thought, primitively, "I'll just modify CMySQL::GetFields() to lower-case and strip field names so they're compatible with Google Spreadsheets." But of course, then my class should really be called, CMySQLForGoogleSpreadsheets, and that can't be right. So, the thing which translates must exist outside of an ISyncable implementor. And surely it can't be right to make each translation a method in CSyncer. If it exists outside of both ISyncable and CSyncer, then what is it? (Is it even an "it"?) Is it an abstract class, i.e. abstract CTranslator? Is it an interface, since a translator only does, not has, i.e. interface ITranslator? Does it even require instantiation? e.g. If it's an ITranslator, then should its translation methods be static? (I learned what "late static binding" meant, today.) And, dear God, whatever it is, how should a CSyncer use it? Does it "have" it? Is it, "it"? Who am I? ...am I, "I"? I've attempted to break up the question into sub-questions, but essentially my question is singular: How does one implement an object A that conceptually "links" (has) two objects b1 and b2 that share a common interface B, where certain pairs of b1 and b2 require a helper, e.g. a translator, to be handled by A? Something tells me that I've overcomplicated this design, or violated a principle much higher up. Thank you all very much for your time and any advice you can provide.

  Read the article

• Fans running very fast on MacBook Pro 8.1 ubuntu 12.04

  - by Tomasz Kacprzak

  I installed Ubuntu 12.04 on Macbook Pro 8.1 and one of the first things I noticed was that the fans were starting to spin very fast every few minutes for 10-30 sec and then going back to normal. That was happening even without any processor load, when completely idle. The fans were usually spinning at 4000 RPM and made much noise. The computer was not getting hotter than usual. When running OSX Lion there was no noise at all, fans almost all the time at 2000 RPM. I spent some time on it and found out that Precise uses a deamon to control the temperature, called macfanctld. You can use /etc/macfanctld.conf to set the configuration. I found out that the high fan speed is not due to the fact that the temperature is getting hot, but because there are two sensors which indicate wrong numbers (you can check that using 'sensors' command ): TW0P: +129.0°C TCTD: +256.0°C TCFC: +0.0°C TMBS: +0.0°C or setting the macfanctld log level to 2: Speed: 4992, *AVG: 56.9C, TC0P: 50.2C, TG0P: 51.5C, Sensors: TB0T:34 TB1T:34 TB2T:33 TC0C:58 TC0D:56 TC0E:59 TC0F:60 TC0P:50 TC1C:58 TC2C:58 TC3C:58 TC4C:57 TCFC:0 TCGC:57 TCSA:53 TCTD:256 TG0D:52 TG0P:52 THSP:42 TM0S:64 TMBS:0 TP0P:54 TPCD:60 TW0P:129 Th1H:51 Th2H:48 Tm0P:40 Ts0P:32 Ts0S:43 Moreover, TCTD was randomly jumping from temperatures of 0 to 256, so this may be the reason for unjustified random fan speeds. macfanctld is taking an average of the sensors including the values above, so the actual AVG temp used to control the fans is wrong, usually biased up, hence high RPM and noise. The workaround solution is to use an option in the macfanctld.conf which allows to ignore the malfunctioning sensors: exclude: 13 16 21 24 After reboot the reported temperatures are usually normal and the fans are working at reasonable speeds. I tested the response of the fans to heavy processor load by asking MATLAB to invert 10000x10000 matrix and the AVG temperature jumped to 63deg, and the fan to max 6200 RPM and then got it back to normal temperature. So I think it is safe so far. There is a expired bug about the failing sensor readings: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/955538 which may be good to open again. My question would be: does anyone know what the failing sensors do and if there is any danger in excluding them? Maybe some better solution to this problem?

  Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >