Search Results

Search found 8185 results on 328 pages for 'capture card'.

Page 178/328 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

  • Settings for multiple monitors are not stored

    - by JJD
    I am running Ubuntu 12.04. on a Lenovo Thinkpad T400. I connected an external monitor as a second display. The laptop stands under the external screen. The laptop has a native resolution of 1440x900 (16:10), the external monitor 1280x1024 (5:4). There are two graphic adapters: one internal Intel GMA 4500 MHD and an discrete ATI card. Currently, the integrated Intel is enabled. I use the Display application to arrange the position of the monitors so it look like this: The problem: Whenever I restart my computer the configuration gets lost. First, the displays are mirrored instead of extended. I have to press Fn + F7 two times to switch to extended mode. Second, the Display settings still look like this: I know this worked once when I was running Ubuntu 10.10. I cannot tell since when it does not work. Do you know how I can permanently store the settings?

    Read the article

  • No Internet On 12.04.1

    - by David Ramos
    I have no internet on Ubuntu 12.04.1 so i'm on a desktop so I got to install a .exe program to run my wireless card for my desktop so I got internet access, But I can't seem to download wine or its source files. If I do I put on my usb and boot into Ubuntu but then when I try to open it I get the programs source files etc. Anyone who could help me Please do :| ( I can't install wine from software center since I have no connection online). Note : I can download my stuff on windows 8 boot so I can transfer files to my usb to run on Ubuntu.

    Read the article

  • Using External Monitor with Laptop Monitor as separate monitors

    - by user14623
    I am trying to use 32"LCD monitor with my ubuntu 10.10 installation. I am trying to use my laptop screen and external monitor at the same time but having two separate desktops. I also want to use my laptop with 1280x800 resolution and external one with 1920 x 1080 using VGA. However, ubuntu sees my external LCD as a CRT and provide 13....x... resolution at the best not above. My graphics card driver is Nvidia 270.... driver. Is ubuntu capable of using two monitors separately or should i give up? Thank you

    Read the article

  • I can't do "sudo"

    - by Klevin92
    Let's describe it from the beginning: I was planning to re-enable the password requirement in LightDM for security reasons. But, since my PC's been sluggish these times, it FC'd the password setup when I was entering and now I can't enter it even with combinatorics. I have followed the tips in the Help page, but with all of them I have issues: I try to enter recovery mode (so that I type passwd and my name and change it), but it is a black screen just like my boot screen (because of nVidia graphic card compatibility issue), then I can't do anything I also tried the editting "shadow" file, but the guide talks about some commas that I just don't see where they are supposed to be. I even tried deletting the keyring file like it's said, but nothing happens (except that I lose the other passwords) So is there anything I can do to have my password back? (a bonus would be stopping all this sluggish, apps not responding, etc)

    Read the article

  • Can't connect to Wireless Access Point after installing proprietary drivers

    - by user6554
    I had Windows Vista Basic installed on my computer and I replaced it with Ubuntu 10.10. I then preceded to do the following: I downloaded the wireless driver from 'additional drivers' I enabled my wireless card And now it won't connect to my router but my game systems will. Then I downloaded WiFi-Radar  which did not seem to fix the problem. I still cannot connect to the Internet. I have done an exhaustive search of the Internet and turned up nothing.

    Read the article

  • pulseaudio on ubuntu server

    - by Dan
    I am running ubuntu server, and trying to get pulseaudio working. I followed the instructions at How do I run PulseAudio in a headless server installation? At the moment, pacmd list-cards is reporting 0 cards, and I suspect this has something to do with the fact aplay is only playing sound when I run it as sudo. As far as I can tell, this means the the kernel module for my sound card is in fact loaded. I have already tried adding my user to the "audio" group, but this does not help. My questions are 1) How do I get aplay to work without running it as sudo 2) Is there anything special I need to do to make pulseaudio work at this point.

    Read the article

  • pulseaudio and alsa on ubuntu 12.04 server

    - by Dan
    I am running ubuntu 12.04server, and trying to get pulseaudio working. I followed the instructions at How do I run PulseAudio in a headless server installation? At the moment, pacmd list-cards is reporting 0 cards, aplay will only playing sound when I run it as sudo, and running alsamixer as sudo also works, but running it as my user produces "cannot open mixer: No such file or directory" As far as I can tell, this means the the kernel module for my sound card is in fact loaded. I have already tried adding my user to the "audio" group, but this does not help. The permissions on the devices in /dev/snd are all crw-rw---T 1 root audio 116 I noticed on an ubuntu 12.04 desktop, that the file permissions are slightly different. On the desktop, they are crw-rw---T+ 1 root audio 116 My questions are 1) How do I get aplay to work without running it as sudo on the server 2) Is there anything special I need to do to make pulseaudio work at this point.

    Read the article

  • How to Save Hundreds or Thousands of Dollars on Cell Phone Service

    - by Chris Hoffman
    Cell phone contracts are bad. You get a seemingly cheap phone up front, but you more than pay for the cost of the phone over two years. Prepaid phone plans are surging in North America for a reason. Prepaid phone plans will be cheaper and more flexible than traditional contracts with big carriers for many people. However much you use your phone, there’s a good chance you can save money with a prepaid service. No More Contracts Here’s how cell phone service typically works in North America: You get a subsidized phone for “free”, $99, or $199. You sign up for a two-year contract and more than pay back the cost of that phone over the length of the contract. This is similar to leasing something or purchasing it on a credit card and paying it back over two years — you spend less up front, but you’re paying more in the long run. But this isn’t the only option. You could opt for a cheaper prepaid service that doesn’t lock you into a contract. If you don’t use your phone much, you could just pay for what you use and avoid the hefty cell phone bills. If you use your phone a lot, you could get a cheaper plan, too. Now, this certainly isn’t for everyone. If you want the latest iPhone or Galaxy smartphone every two years and require a 4G data connection, prepaid services may not be for you. On the other hand, if you don’t need the latest phone, you can save money here. You can also save a huge amount of money if you don’t use your phone much. Phone Options When you choose your prepaid or contract-free service, you’ll often be able to purchase a phone from them. You’ll generally be able to find dirt-cheap dumbphones and the cheapest, slowest Android phones for not very much money. If you are able to buy a top-of-the-line smartphone, you’ll have to pay the full, unsubsidized price. That’s $649 for either an iPhone 5S or Samsung Galaxy S4. Whatever phones the service provider offers, you could always buy a phone elsewhere — for example, you could buy an unsubsidized iPhone direct from Apple and then take it to your cell phone service of choice. Most services will allow you to get a SIM card and pop it into your existing phone rather than purchasing a phone. If you can get a hand-me-down smartphone, you can often save quite a bit of money. For example, you may have a family member upgrading from an iPhone 4S to an iPhone 5S. You could take their phone to a prepaid carrier and have a nicer phone on a cheap cell phone plan. If you brought an old smartphone to a big carrier like AT&T or Verizon, they wouldn’t give you a discount on your monthly plan. You’d have to pay the same amount of money every month as if you had gotten a subsidized phone. Google’s Nexus phones are also great options for people looking to buy smartphones and pay up-front. Google’s Nexus 4 offered a modern, almost top-of-the-line Android smartphone experience at $299 or $349 when it came out last year. Google will soon be releasing the Nexus 5 and it’s expected to be priced at $349. That’s certainly a lot more than a cheap phone, but it’s a fairly high-end smartphone at almost half the price of an iPhone 5S or Galaxy S4. Nexus phones can be purchased online from Google’s Play Store. Service Options When choosing a service, you need to consider what you actually use. If you’re someone who only uses your phone rarely, you can get plans that will allow you to pay as little as a few dollars per month. If you’re someone who’s usually in range of Wi-Fi, you may not need much data at all. If you want a plan with unlimited talk, texting, and data usage, you can get it for much cheaper than you’d pay on a major carrier like AT&T. The options here range from pay-as-you-go plans, like the ones offered by T-Mobile, which allow you to put a certain amount of money in and only drain that balance when you actually use minutes, texts, or data. If you only make a few calls and send a few texts per month, you’d only pay a few bucks. On the other end, Walmart’s Straight Talk service is a popular option that offers unlimited talk, texting, and data at $45 per month. Which service is right for you depends on a lot of things, including your usage and what each network’s coverage is like in your area. You’ll want to do some research of your own before choosing a service. Prepaid services also offer you even more flexibility after you choose one. If you’re not happy or a better deal comes along, you can switch — you’re not locked into your service for two years and you won’t pay an early termination fee. Image Credit: Intel Free Press on Flickr, Jon Fingas on Flickr, John Karakatsanis on Flickr, kendalkinggroup on Flickr     

    Read the article

  • Monitor resolution messed up, monitor is unknown.

    - by Kaustubh P
    Is there anyway to reset my monitor? My moitor is using the xorg.conf file. I use 10.04, without any Graphics Card. My monitor is an Acer X193W, with a native resolution of 1440x900. This is my xorg.conf file: Section "Screen" Identifier "Configured Screen Device" Device "Configured Video Device" Monitor "Test" DefaultDepth 16 SubSection "Display" Depth 16 Modes "1440x900_60.00" EndSubSection EndSection #Section "Device" # Identifier "Configured Video Device" # HorizSync # VertRefresh #EndSection I still cant view the native resolution, even when defined in the xorg file. An way I can revert to the default, or delete some files, to make the system detect the monitor again? My last resort is the cvt method, and adding it to the xrandr file. EDIT: I use Intel Drivers. My /proc/fb contains 0 VGA16 VGA

    Read the article

  • Can anyone tell me why Gnome 3 looks like as if it were a gnome fallback session in my virtualbox?

    - by Elysium
    For some reason Gnome 3 wont work in my virtualbox. Both gnome classic and gnome look exactly identical. The version of my virtualbox is: 4.1.2_ Ubuntu r38459 The 3D acceleration is on in the virtualbox and the Guest Additions is installed in the virtualbox from the software center. Obviously, the graphic card driver is installed on the main Ubuntu system I am using with my laptop. (although the post-release updates can't be installed for whatever reason) Gnome shell is installed from the software center in the virtualbox. Now the issue is that the gnome and gnome classic look like just the same. Here is an image of what gnome looks like (so does gnome classic too....so I am only posting one image): What causes this issue? By the way....I am using Ubuntu 11.10 with gnome fallback session.

    Read the article

  • Not able to connect huawei ec1561

    - by Nixon Babu
    I have a huawei ec1561 broadband data card, ISP-MTS India. I am not able to connect internet through it. while connecting it via network manager it says "You are registered with home network" and again "Modem network disconnected" . i think it is detected as a modem but not connecting properly. Any help please? I'm hitting this rock with my head more than a month... when I tried installing the driver that came with the device it finally says "Installing NDIS driver failed". I can post further information if anybody helps

    Read the article

  • Nautilus is really slow

    - by david
    Nautilus used to be lightning fast.Now it's dead slow. I have tried upgrading the video card but that does not seem to be the problem. Also I found that there was a problem with the Dropbox uninstall, finally I replace it with pcmanfm which appears to be much faster but the down side is that I no longer have the gwibber social client and a lot of stuff don't work like they use to. Also I completely removed nautilus and couldn't even login to ubuntu to install again nautilus.How can I remove or repair nautilus, and use pcmanfm instead? I have a dell inspiron 1440 3gb ram / disk 300gb / Additionally, why does nautilus run fast when I run it as root? There are no USB devices attached to my computer. Thanks in advance

    Read the article

  • How can I enable Unity 3d after installing Bumblebee? GLX Problems

    - by ashley
    I'm new to Ubuntu, I'm running 12.04 64 Bit on a Dell XPS L207x with a Nvidia GT555M card. From what I could understand online I needed to install Bumblebee to get the most out of the Optimus system and better battery life. I can test the Bumblebee is working by running optirun glxgears for example. If I run just glxgears then I get the following error Error: couldn't get an RGB, Double-buffered visual. I'm also unable to run Unity 3d, which I would very much like. I'd greatly appreciate any and all help, please be gentle.

    Read the article

  • Laptop takes a long time to boot after Grub menu

    - by Andres
    I am running a Asus R401VJ laptop (Latin America version of N46VJ) that has a Core i7 CPU and 8GB RAM. After my Grub menu, which is displayed for 2 seconds as I set it up, I'm getting a black screen with a blinking white cursor that is increasing my boot time to about 60 seconds. After a while Ubuntu runs fine, I just want to reduce my boot time. I don't know if this has something to do with my never used Nvidia 2GB GeForce GT 635M graphics card. Always when I tried to install the driver, I ended up with a ~600x800 screen resolution, and I fixed it by deleting a file called: xorg.conf from the /etc/X11/ directory, following a suggestion that I read in another forum. I would appreciate detailed answers, I'm still new at Ubuntu.

    Read the article

  • Nvidia problems. I think.

    - by Nate D.
    Let me start off by saying, I've been trying to run Ubuntu on my custom PC for about 2 years. From 10.04 to 12.04, this problem persists. When I try to boot Ubuntu from either a USB stick or a CD, I see the normal Ubuntu splash screen. It looks like it's working, orange dots are moving, but then the screen glitches and freezes. I'm assuming this happens because there are no drivers for my graphics card (Nvidia GeForce 8800, I think). My motherboard has no onboard graphics, nor does it have a VGA out. So, how can I get this working on my system? Can I somehow put the drivers along side the .img on the USB stick? I can boot from my Ubuntu USB stick on my MacBook. In case that helps anyone...

    Read the article

  • Force gdm login screen to the primary monitor

    - by Kirill
    I have two monitors attached to my video card. Primary monitor has a resolution equal to 1280x1024 and the second has 1920x1200. My gdm login screen always appears on the second monitor even if it is switched off. My question is how to force gdm to show the login screen always on the primary monitor with resolution 1280x1024? I use Nvidia GT9500 videcard in Twinview mode. I can't use Xinerama because vpdau doesn't work correclty in this mode. What I have found is that mouse pointer always appears in the center of union of the screens and center is always on the monitor with higher resolution. Login screen always shows where mouse cursor is. Now my primary monitor has a resolution equal to 1920x1080. The problem still persists, mouse cursor always appears in the right-bottom corner of the second monitor.

    Read the article

  • Settings xorg.conf to be used with VESA driver?

    - by Fernando Costa
    I have an brand new installation of Ubuntu 9.10 (karmic version) where everything is fine except the video resolution. In Ubuntu 9.10, the file xorg.conf is empty by default. I'm using an onboard video card, and Ubuntu can not find the right resolution for me. It always uses 800x600, but I need at least 1024x768. Also, my monitor is listed as Unknown Type. Ubuntu did find the right resolution when I changed the monitor to a Samsung monitor. By the way what are the generic settings to put inside xorg.conf? What is the settings for Refresh Rate, for example, I got a resolution of 1280x800, but the Refresh Rate generally between 60 ~ 80 htz is ZERO on my resolution.. In 1024 resolution my Refresh Rate is 75 htz.. What is going on with my resolution and how to modify the Refresh Rate?? Many Thanks!

    Read the article

  • Sound driver for motherboard gigabyte ga-g1975x-c (Creative Sound Blaster Live 24-bit) (alsa, ca0106)

    - by Mikl
    My motherboard is gigabyte ga-g1975x-c with integrated audio "Creative Sound Blaster Live 24-bit". I have installed Ubuntu 10.10, and there was no sound at all. Alsa drivers was already installed. Finally after long searching, i have found how to make my sound work. /etc/modprobe.d/alsa-base.conf: options snd-ca0106 subsystem=0x10121102 //i have added this line and restart After restarting my speakers and microfon works fine. Maybe somebody knows different/better subsystem code for my sound card???

    Read the article

  • HDMI port not recognized on Sony Vaio

    - by julio
    I am running Ubuntu 11.10 64bit with a Sony VAIO VPC F11. It has an NVIDIA GeForce 310M video card, with the latest Nvidia drivers for the 64 bit linux, and a Windows partition with Win7 64bit. NVIDIA driver version is NVIDIA-Linux-x86_64-280.13 External monitor is Samsung SyncMaster P2770 If I boot into the Windows partition, the HDMI works as expected, with sound and video-- under linux, the HDMI port is not recognized at all, apparently, and provides no signal to the attached monitor. The nividia-settings tool does not recognize any monitor connected to the HDMI port. Disper is installed and cannot recognize an attached external monitor. Can anyone help me diagnose this issue and fix it if possible? The laptop has only the one HDMI port to connect any external monitor, so it I can't get this working I'm stuck using either the laptop screen or Windows. Thanks

    Read the article

  • Suitable Ubuntu distribution

    - by Dr AMD
    I need help choosing a suitable distrbution for my PC. I am using an HP d530 CMT with: ?• CPU Type: Intel Pentium 4, 3000 MHz (15 x 200) ?• Motherboard Chipset: Intel Springdale-G i865G ?• System Memory: 1015 MB (PC3200 DDR SDRAM) ?• Video Adapter: Intel(R) 82865G Graphics Controller (96 MB) ?• 3D Accelerator: Intel Extreme Graphics 2 ?• Audio Adapter: Analog Devices AD1981B(L) @ Intel 82801EB ICH5 - AC'97 Audio Controller ?• Network Adapter: Broadcom NetXtreme Gigabit Ethernet I have tried to install Ubuntu 13.10 and 12.04 LTS. Everything is OK on Ubuntu 12.04 except, that the video card was not recognized and the media player, YouTube,etc. did not work properly.

    Read the article

  • ADSI, SQL, Exchange Server 2010

    - by WernerCD
    Maybe I'm barking up the wrong tree... We have a Domain Controller "DC1". We have Exchange Server 2010 "Postman". Say I have an Address Book: And I add a few contacts to it: How then do I get the data from that contact via ADSI? Say I want the Job Title or CustomerID field that I filled out in the Contacts list? SELECT * FROM OPENQUERY(ADSI, 'SELECT EXTENSIONATTRIBUTE15 ,DISPLAYNAME ,GIVENNAME ,NAME ,SN ,SAMACCOUNTNAME FROM ''LDAP://DC=ATLANTICGENERAL,DC=ORG'' WHERE USERACCOUNTCONTROL=512 AND SAMACCOUNTTYPE=805306368 AND OBJECTCLASS=''PERSON'' AND OBJECTCLASS=''USER'' ORDER BY SAMACCOUNTTYPE ') How can I tie the Contact Card to an Active Directory User, so that I can edit either the AD account information OR the Exchange information and have them synced up?

    Read the article

  • Ubunti 12.10 wake on lan not working with Realtek 8139

    - by f.cipriani
    My pc doesn't wake up when receiving a magic packet from a pc connected to the same router. ethtool: fcipriani@ubuntu:~$ sudo ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes I have enabled all the wake up features in my bios, and I have verified the magic packet gets to the pc. I suspect the main problem is that the NIC light is completely turned off after the shutdown, but even after spending a lot of time researching I can't understand if this is a limit of my network card, my mobo, or something in the OS which needs to be configured correctly in order to leave the NIC in stand by mode with the light flashing. the NIC is Realtek 8139, the motherboard Asus P5L13L-X

    Read the article

  • Wireless not working, no driver showing in the Additional Drivers window

    - by edit lopez
    I am a new user of Ubuntu. I have a Asus Q501L laptop that came preinstalled with Windows 8, but I wanted to move from Windows and try something new, so I just decided to install Ubuntu without thinking to much about it. The problem I have is that I can't install the additional drivers. When I go to to Additional Drivers nothing appears, it just says: no proprietary drivers are in use and in small letters continues: a proprietary driver has private code that Ubuntu developers can't review and improve. security and others updates are dependent on drivers vendor.. I can't even use the wireless connection. I really don't know what to do. I tried to download the drivers from Asus, but when I tried to install them it said: an error occurred while loading the archive. Also I don't know the model of the PC wireless card. If there is something I can do to find out that please tell me. Thanks!

    Read the article

  • Black screen after installing ubuntu 11.10 on new pc

    - by wouter205
    Could anyone troubleshoot me please; After installing ubuntu on my fresh desktop, the ubuntu loading screen shortly appears and then I get a black screen and cannot access the login screen. When booting in failsafe modus, i get a message that ubuntu failed to load failsafe video drivers. I have a radeon 6850 video card and am able to start ubuntu live session. So I guess it loads the wrong drivers upon booting from hd. I remember a file in which you could change which drivers it should load, but forgot the exact location. Could this solve my problem (or another solution)

    Read the article

  • How to stop fan running always on Asus P8P76LE motherboard with ATI Radeon HD6900

    - by Chris Good
    I'm using Ubuntu 12.04 LTS. I'm not sure if it is the CPU (i7) fan or the video card fan. I've tried using lm-sensors & fancontrol sudo sensors-detect Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `w83627ehf': * ISA bus, address 0x290 Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: # Chip drivers coretemp w83627ehf Like many people, I'm also getting error: /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Here is the output of sensors: # sensors radeon-pci-0100 Adapter: PCI adapter temp1: +71.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 1: +40.0°C (high = +80.0°C, crit = +98.0°C) Core 2: +43.0°C (high = +80.0°C, crit = +98.0°C) Core 3: +42.0°C (high = +80.0°C, crit = +98.0°C) I'm hoping some-one has already solved this for my configuration because this seems to be a problem for many people and there are many different suggestions.

    Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >