Search Results

Search found 6171 results on 247 pages for 'debian installer'.

Page 178/247 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

• Running Windows XP with VMWare Fusion from a Fujitsu-Siemens recovery disk.

  - by Time Machine

  I have installed a trail version from VMWare Fusion. I had (sold now) a very old Fujitu-Siemens laptop (from around 2001) which came with two recovery disks (which I still have :P). One recovery disk is a Windows XP installer, the other is a disk with drivers and useless software you will never use and run permanently in the background. If I install Windows XP from the recovery disk (which did not contain any software except what comes with Windows XP, for as far as I know), will it run in VMWare Fusion? Or do I really have to buy/pirate a new Windows XP installation disk? Thanks. Yes, I need XP, not 7.

  Read the article

• "Disk boot failure" error after installing Windows 7 on SSD

  - by Tony_Henrich

  I have a system with 3 SATA drives which runs fine. Got a new SSD drive and wanted to install a fresh Windows-7 on it. So I removed the boot drive and replaced it with the SSD drive. Installed Windows and when it was done, rebooted and now I get "Disk boot failure. Insert system disk and press enter" error message. I reinstall again and still same message. Removed the SSD and put back the original drive and I got the same message!! I checked the BIOS and things look good. Something is wrong. Two questions: 1- Why isn't the new Windows booting from the SSD? 2- Why isn't the machine booting using the previous working configuration anymore, after removing the SSD? I did connect it during the second Windows installation but it was the last drive in the SATA connector. Would Windows installer mess with its MBR sector?

  Read the article

• Very frequent "Server not found" messages

  - by Village

  Recently, while browsing and clicking or typing an address, I get: "Server not found", "Connection was reset", or a half-loaded page. Usually the page loads instantly after clicking reload, but this means I must reload on every page. Images on one site, but stored at a different server don't load until reloading for a second time. Clicking "submit" on many sites frequently doesn't work unless I reload many times. Sometimes sites load, but without colors and formating, appearing as if they would in Lynx. This seems to happen with every Web site. My Internet service claims everything on their end is fine. This happened a day after running an update in aptitude. I have not updated any hardware. I have tried clearing Iceweasel's cache. I do not have any router or other equipment. What could be going on? How can I troubleshoot this? PPPoE connection, Iceweasel 3.5.16, Debian 6

  Read the article

• Shaping with shorewall complex shaper not work (or I don't understand principle of operation)

  - by strangeman

  I have router (Debian 6) with 2 network interfaces (and 1 virtual tun interface): eth0 - localnet, 192.168.1.0/24, router ip is 192.168.1.1 eth1 - internet tun0 - openvpn to central office. openvpn network - 10.1.0.0/24, central office network - 192.168.0.0/24 I need shape all traffic, which moves 192.168.1.0/24-192.168.0.1:6666 and 192.168.1.0/24<-192.168.0.1:6666, and restrict its speed to 200kbit. Now, I have this configuration, but its not work: tcdevices (set up interface parameters) #INTERFACE IN-BANDWITH OUT-BANDWIDTH eth0 100mbit 100mbit #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE tcrules (mark all traffic, which move on 6666 port) #MARK SOURCE DEST PROTO PORT(S) 1 0.0.0.0/0 0.0.0.0/0 tcp 6666 #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE tcclasses (shape all marked traffic) #INTERFACE MARK RATE CEIL PRIORITY OPTIONS eth0 1 200kbit 200kbit 2 eth0 255 9*full/10 full 1 default #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE Where is my mistake?

  Read the article

• Tool to allow Kerberos Authenticated users to modify Firewall settings

  - by Lars Hanke

  I run a firewall on a central router. Recently, several users want to use Skype. Since firewalling Skype virtually means to switch the firewall off, I consider to allow users to temporarily punch holes for their system. Since the users have no accounts on the router, I consider using Kerberos for authentication and authorization. The router is a Debian Squeeze box, with minimal configuration, i.e. no web-server, database or similar gimmicks. Does anyone know an existing solution, which could be used for that purpose? Or does anybody know easy to use and well documented frameworks in say Perl, Python, C, C++, ... making the set-up of a Kerberos authenticated Client and Server application really simple?

  Read the article

• Explorer fails to load with UAC enabled

  - by user37679

  While running an InstallShield based installer, my Windows 7 machine became unresponsive. After forcing a reboot, I can log in to the system, but explorer does not run. I can log in as a different user without issue and when I change UAC to its lowest setting, I can log in as the user that was performing the install. However, if I re-enable UAC, I am unable to get explorer to run again on login. I have checked the HKCU\Software\Microsoft\Windows\CurrentVersion\Run and RunOnce, but don't see anything that isn't configured to run on startup. I completed the installation of the software as the "good" user without issue.

  Read the article

• Cent OS upgrade PHP

  - by greggory.hz

  I'm in the midst of resolving a bunch of security issues on a clients server to get them compliant with credit card laws and such. The first order of business is getting php from 5.2.14 to 5.2.16. When I run yum update php, this is the output I get: Excluding Packages from CentOS-5 - Addons Finished Excluding Packages from CentOS-5 - Base Finished Excluding Packages from CentOS-5 - Extras Finished Excluding Packages from CentOS-5 - Updates Finished Setting up Update Process No Packages marked for Update I'm fairly new to CentOS, but with Debian/Ubuntu, you can add PPAs to allow new software packages. Is there something similar for CentOS? This output makes it look like it's ignoring all the main package repos as well.

  Read the article

• Critical (Unixlike) Distros for Sysadmin Hopefuls to Have Experience With

  - by Interwebs

  Hi All, I'm trying to learn to be a Unix/Linux Sysadmin, and am hoping to get some hands-on experience by setting up a few installs (VMs, old comps, and the like) at home and practicing administering them. I was wondering, in the experience of those on this site, which distros are critical to be comfortable with. Obviously, to a certain extent, they're all similar, but there are substantial enough differences between administering, say, Debian, OpenSolaris, FreeBSD, and CentOS. So, which distros are most important to practice with in your opinion? Which have had most demand/come up most often in actual work situations? Thanks!

  Read the article

• Moving cpanel backup of magento site to VPS

  - by user2564024

  I was having my site in shared hosting, I took the entire backup, its structure is like addons homedir mysql resellerpackages suspendinfo bandwidth homedir_paths mysql.sql sds userconfig counters httpfiles mysql-timestamps sds2 userdata cp locale nobodyfiles shadow va cron logaholic pds shell vad digestshadow logs proftpdpasswd ssl version dnszones meta psql sslcerts vf domainkeys mm quota ssldomain fp mma resellerconfig sslkeys has_sslstorage mms resellerfeatures suspended Now I have subscribed to vps, I have copied the files inside homedir/public_html to var/www/html of my new hosting, but am seeing the following error when I view it browser, There has been an error processing your request Exception printing is disabled by default for security reasons. Error log record number: 259343920016 I have just created database with name magenhto inside mysql. Previously I had cpanel and used one click installer. Hence am not aware of how to use that data inside mysql to this new system and are there any more changes.

  Read the article

• Tomcat Failed to start

  - by user530158

  I have installed Tomcat on windows XP through the Tomcat installer. I have installed JDK 1.6. But when I start Tomacat from services.msi on XP, I get the following error: java.lang.ClassNotFoundException: org.apache.catalina.core.AprLifecycleListener at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at sun.misc.Launcher$ExtClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at org.apache.commons.digester.ObjectCreateRule.begin(ObjectCreateRule.java:204) at org.apache.commons.digester.Rule.begin(Rule.java:152) at org.apache.commons.digester.Digester.startElement(Digester.java:1286) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(Unknown Source) at com.sun.org.apache.xerces.internal.parsers.AbstractXMLDocumentParser.emptyElement(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)

  Read the article

• How to prevent nginx from appending the location to root? [duplicate]

  - by simonszu

  This question already has an answer here: nginx location pathing issue 2 answers I want to serve an Icinga Webview via nginx. This webview should be accessible via myserver.com/icinga (as the debian autoconfig for apache will do). I have the following lines in my nginx config: location /icinga { root /usr/share/icinga/htdocs; index index.html; auth_basic "Restricted"; auth_basic_user_file /etc/icinga/htpasswd.users; } However, i get an error 404 and a log entry that says: *10 open() "/usr/share/icinga/htdocs/icinga" failed (2: No such file or directory), So it seems that nginx appends the location value to the root value. I think i figured it out how to prevent this some time ago, but i did not document it for myself and have forgotten how to do it. And now i can't fix it for myself. Can you tell me how to prevent this behaviour?

  Read the article

• Proftpd: How to set default root to a users home directory without jailing the user?

  - by sacamano

  Hi there. I've installed proftpd on my debian box but I'm having having some trouble with the configuration. In my proftpd.conf I've added; DefaultRoot ~ !ftp_special This works fine in that all users except members of ftp-special are unable to navigate outside of their home folder. However, I want users that are members of ftp-special to enter a special home folder when logging on to the ftp server but at the same time I want them to be able to navigate the entire server. Right now, if a user that is a member of ftp-special logs on his entry-point is the root ( / ). Thanks in advance.

  Read the article

• Set up a "relay" service

  - by trikks

  Hi! I'm trying to create a 'left client' server < 'right client' setup but need some advice and tips. Let's say that I have a server-daemon on the left side, like a vnc-server that connects to the middle server. On the right side I've got a client that want to connect to the left server-daemon, but it has to be done through the middle server. I assume this should be done with some tunneling service. The server environment is a fully featured Debian Linux or Mac OS X Server host. Any idéas? Thanks / Trikks

  Read the article

• How to meet Windows 8 upgrade's 20 GB requirement on a 40 GB SSD with a 22 GB Windows 7 install?

  - by deryus

  A PC I have has Windows 7 installed on a 40 GB SSD, and I bought a Windows 8 upgrade for it. The current Windows folder on it however is 22 GB, that's after removing hibernation, turning off the pagefile and removing all extra programs/features. So even if I purge every other file and folder, the Windows folder itself takes more than half the disk. The PC also has a 1 TB HDD, but the upgrade installer didn't give me any options about choosing another drive. So, is my only option to reinstall Windows 7 on a larger drive, then proceed with the Windows 8 upgrade? Or is there anything I can remove from the Windows folder that while might be dangerous for long term usage, is fine for the few minutes I need to get Windows 8 installing?

  Read the article

• Backup of "Leavers" network directory

  - by Mez

  I want to create a backup of a Leavers network home directory. I've generally done this before by just creating an iso with genisoimage and then burning it. However, it seems that the latest users have 10G in their files. For archival purposes, I want to be able to burn these to multiple DVDs. How do I create these DVD iso images (I know it's got something to do with tar and stream-media-size, and then how do I restore them if I need them again? Using Debian

  Read the article

• Unable to open websites that use HTTPS on linux

  - by negai

  I have the following network configuration: My PC 192.168.1.20/24 uses 192.168.1.1/24 as a gateway. Dlink-2760U router with Local address 192.168.1.1/24 has a VPN connection open with the provider using PPTP. Whenever I'm trying to open some web-sites that has some authorization (e.g. gmail.com, coursera.org), I'm getting a request timeout. This problem is observed mostly on linux (Ubuntu 12.04 and Debian 6.0), while most of such websites work correctly on windows XP. Could you please help me diagnose the problem? Could it be related to NAT + HTTPS? Thanks

  Read the article

• What is the best Linux distro for a php web server? [on hold]

  - by benjisail

  We are planning to upgrade our hardware and at the same time we plan to reinstall all our web server from a fresh OS. Currently our web server is running on CentOS 4.7 on a dedicated server. We are using Apache, Mysql, PHP, SVN, FTP and all the needed tools for a web server managed through SSH. We plan to use a cloud server for the new web server. I don't know which Linux distro to take for this new server. Should I stay with Centos and just take the latest release 5.4 or should I switch to something else like a Debian base distro (Ubuntu Server)? The thing that I didn't like with CentOS was the none availability of the latest version of PHP and Apache on Yum. This make it harder to keep our webserver updated with the latest technologies... Thanks for your help!

  Read the article

• Software Raid1 with Trim

  - by Penetal

  I have two Crucial C300 SSD disks that I would like to use as my OS disks in my new home server. I have read around a little and some places say that TRIM is simply not supported on any raid config, hw or sw. Then on some other sites I have seen that new support have come for SW raid via LVM somehow, and this is what I'm curious to know about. Can I get Raid 1 and still have TRIM enabled on SW raid by abstracting it with LVM or in any other way? I will most likely be using either Debian or CentOS.

  Read the article

• Is there a way for one SSH config file to include another one?

  - by Joe Casadonte

  In case it matters: OS: Ubuntu 10.04 SSH: OpenSSH_5.3p1 Debian-3ubuntu5 I'd like one SSH config file to include another one. The use case would be to define whatever I want in my default .ssh/config file and then pre-pend a couple of extra things in a separate file (e.g. ~/.ssh/foo.config). I want the second file to incorporate the first one, though, so I don't have to duplicate everything in the first one. Is that doable? Thanks!

  Read the article

• Need help making a bootable portable USB hard drive. [Utility I need will only create bootable CDs or USB flash drives]

  - by Sootah

  I've got a copy of Spotmau's Bootsuite 2012, which is an utterly fantastic tool. It has completely replaced Bart PE for me, and I relied on BPE for YEARS. Anyway, the issue I'm having is that the Bootsuite installer utility will only create bootable USB flash drives, or bootable CDs. The USB hard drive is detected as a hard drive instead of as a USB device, and as such I cannot use the included app to install to the USB HDD. Is there a way of either copying the files from a bootable flash drive to a USB HDD and making that work, or of taking an .ISO of the bootable CD and using that to make the portable HD bootable? The flash drives I've made of it are great as I can always have it with me [have 16GB dangling from my keychain. :) ], but my USB hard drive is FAR faster than any flash drive I have, so I'd like to be able to use that when I'm working out of my office or happen to have it with me.

  Read the article

• cd (change directory) to my home directory on Windows [closed]

  - by deostroll

  Possible Duplicate: Is there a short cut command in Windows command prompt to get to the current users home directory like there is in Linux? Any short way to cd to the user specific directories in the command prompt. Like for e.g. in linux shell (debian based) we do a cd ~ and it instantly takes to the current logged user's directory /home/<username>. Anything to this effect on windows? ps: currently trying to do this on xp machines. If it differs for other machines, mention that too.

  Read the article

• which user is the website host

  - by Kossel

  I m learning about server, and I'm configuring nginx mysql php wordpress. the server distro is debian 6. I created a new user and I wish each user is the owner of the site folder /var/www/site.one so I chown -R kossel:kossel site.one my problem is, my wordpress only work if I chmod 644 wp-config.php, which all can read wordpress site suggest that file should be 640. and my question is: when someone open mydomain.com, wordpress has to access wp-config.php file, but which user is it actually using to "read" that file? root? user kossel? anyone else? how can I properly give it permission or owner??

  Read the article

• How do I install Visual Studio 2010 Express somewhere besides C:?

  - by TwentyMiles

  I have a SSD as my primary (C:) drive, mainly used for quickly loading games. It's pretty small (~30 GB) so I want to keep things that don't really need a speed boost off of it. I attempted installing the Visual Studio 2010 Express beta last night, and It claimed to require 2.1 GB of space so I changed the install directory to a secondary, non-SSD drive. After this, the installer said that it would use 1.8 GB on C: and ~200 MB on the secondary drive. While this token gesture of moving 1/10 of the app to the place I told it to is cute, I really want to install everything I can to the secondary drive. Is there any way to install all of Visual Studio 2010 Express to a drive besides C:?

  Read the article

• Is GPU active when there are not any monitors?

  - by Mixer

  Does GPU render anything when there is no monitor plugged in? Today I turned my old PC into some kind of a "server" which means that I want it running 24/7. I don't need any display (I will operate through ssh) so when everything was set up I removed my monitor. After a hour I checked my graphic card's cooling system and it was still hot. My graphic card is GeForce 8600 (with DVI connector), OS is Debian Linux. What is the best solution in this situation (standalone server) if GPU is active and I don't want it to waste power?

  Read the article

• How to change memory for DomU runtime

  - by saffron

  I have a xen server with xen-4.1.3, linux-image-3.2.0-3-amd64, debian squeeze and 16Gb of RAM. The domain-0 has 1Gb of ram, the rest of memory belongs to the hypervisor. I want to start a guest domain with a minimal amount of memory and increase it runtime later. When I start a guest domain with 256Mb of ram and run xm mem-set domu 4Gb, I get ~3Gb only in domu and a guest domain free says: root@test:~# free total used free shared buffers cached Mem: 2830620 72868 2757752 0 2432 43504 -/+ buffers/cache: 26932 2803688 Swap: 1048572 0 1048572 And a guest domain dmesg says: [ 0.000000] Memory: 175912k/2883584k available (3527k kernel code, 448k absent, 2707224k reserved, 3210k data, 612k init) When I start a guest domain with 2Gb of ram I can run xm mem-set domu 7Gb and get ~7Gb of ram in a guest domain: root@test:~# free total used free shared buffers cached Mem: 6828228 74944 6753284 0 1328 12568 -/+ buffers/cache: 61048 6767180 Swap: 1048572 0 1048572 And a guest domain dmesg: [ 0.000000] Memory: 1674960k/16651264k available (3527k kernel code, 448k absent, 14975856k reserved, 3210k data, 612k init) How can I start a guest domain with a minimal amount of ram (256Mb) and increase it under 15Gb?

  Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >