Search Results

Search found 13518 results on 541 pages for 'daniel root'.

Page 179/541 | < Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >

  • pulseaudio and alsa on ubuntu 12.04 server

    - by Dan
    I am running ubuntu 12.04server, and trying to get pulseaudio working. I followed the instructions at How do I run PulseAudio in a headless server installation? At the moment, pacmd list-cards is reporting 0 cards, aplay will only playing sound when I run it as sudo, and running alsamixer as sudo also works, but running it as my user produces "cannot open mixer: No such file or directory" As far as I can tell, this means the the kernel module for my sound card is in fact loaded. I have already tried adding my user to the "audio" group, but this does not help. The permissions on the devices in /dev/snd are all crw-rw---T 1 root audio 116 I noticed on an ubuntu 12.04 desktop, that the file permissions are slightly different. On the desktop, they are crw-rw---T+ 1 root audio 116 My questions are 1) How do I get aplay to work without running it as sudo on the server 2) Is there anything special I need to do to make pulseaudio work at this point.

    Read the article

  • Wireless Not Working on Ubuntu 10.10

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with wireless LAN. It simply doesn't work! Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • What is the significance of '*' (star, asterisk) in the file listing results?

    - by vfclists
    I have noticed that some of my files have an asterisk at end. Does the asterisk at the end have any particular significance? I think they are mostly executable and displayed in green by the ls command. You will see that ./bkmp* and ./bkmp0* have an asterisk at the end. They are executable bash scripts. Here's my output: drwxr-xr-x 7 username username 4096 Oct 2 18:28 ./ drwxr-xr-x 8 root root 4096 Oct 2 09:25 ../ -rw-r--r-- 1 username username 3724 Sep 22 03:06 .bashrc -rwxr--r-- 1 username username 319 Sep 22 03:42 .bkmp* -rwxr--r-- 1 username username 324 Sep 29 23:30 .bkmp0* drwx------ 2 username username 4096 Sep 17 13:52 .cache/ -rw-r--r-- 1 username username 675 Sep 17 13:37 .profile drwx------ 2 username username 4096 Sep 22 10:10 .ssh/ drwx------ 2 username username 4096 Sep 24 19:49 .ssh.local/ drwxr-xr-x 2 username username 4096 Sep 22 04:10 archives/ drwxr-xr-x 3 username username 4096 Sep 24 19:51 home/ -rw-r--r-- 1 username username 27511 Sep 24 19:51 username_backup.20120924_1908.tar.gz

    Read the article

  • Video stutter when using external drive

    - by psion
    When using boxee to play video files off of an external western digital 1TB drive formatted NTFS, I notice a slight stutter in the video every 5-10 seconds. When using mplayer, it doesn't stutter as often, but it still stutters occasionally. If I play the video off of the local sata drive, it plays fine even in boxee. I use this computer as my HTPC and I just switched from windows to linux on it. In windows, I never had any sort of stutter playing movies from the drive. I am using the latest intel graphics drivers (for the intel GMA 950) root@eee-htpc:/home/htpc# grep wd /etc/mtab /dev/sdb1 /mnt/wd2 fuseblk rw,nosuid,nodev,allow_other,blksize=512 0 0 I notice that despite trying to use ntfs or ntfs-3g, ubuntu uses ntfs-fuse which I've heard is slower. /dev/sdb1: Timing buffered disk reads: 80 MB in 3.07 seconds = 26.08 MB/sec root@eee-htpc:/mnt/wd2# dd if=/dev/zero of=./120mb bs=1024 count=120000 root@eee-htpc:/mnt/wd2# time mv ./120mb /home/htpc real 0m2.095s user 0m0.016s sys 0m0.736s Even though fuse has a reputation for being slow, it should easily be fast enough for playing standard definition video files. So why the video stutter? edit: The issue seems to be overhead cpu usage from either playing off of a usb device or ntfs/fuse. Watching CPU usage with top, local files use 10-40% CPU. Watching the same video on the external formatted ntfs, it spikes to 170% (over 100% because of hyperthreading). To me it seems like it must be overhead from the fuse driver, though I don't know if it has more or less overhead than ntfs-3g. It's a EEEBox B202 that has an atom 270, so not exactly the most powerful out there. edit2: I believe the solution would be to use non-fuse drivers or different fuse drivers. so far I have not been able to. edit3: I've probably edited this more times than I should, but as an update I have upgraded ntfs drivers to ntfs-3g 2010.8.8 external FUSE 28 - Third Generation NTFS Driver using the following PPA - ppa:x3lectric/team-iquik-releases. When first opening a video file in boxee that's on ntfs there's still the same amount of lag. After a few minutes of video, the lag seems to go away and the cpu usage comes down to 10-40%. Every so often though, it begins to stutter again. Also, if I skip ahead/back in the file, it begins to stutter a lot.

    Read the article

  • Cannot connect to secure wireless with Netgear wna3100 USB

    - by Vince Radice
    I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

    Read the article

  • How do I encrypt the source code on the webserver?

    - by Ashin k n
    I have a web application developed using Python, HTML, CSS & JavaScript. The customer installs it in any of their own Machine and uses it through their LAN. In short the customer sets up the webserver in any of their own machine. Since its a web application, all the source code is open for the customer in the document root directory of webserver. I want to encrypt the whole source code in the document root directory in such a way that it should not effect the working of the web application. Is there is any way to encrypt the Python, HTML, CSS & JavaScript for this purpose.

    Read the article

  • Can't fix broken packages

    - by AWE
    I am too dumb but determined to use Ubuntu that I paid a professional to install it for me (dualboot 11.10 with Win7). When I came home I got a lot of things from the software center. Skype did not have a download button so I googled it and Ubuntu help told me to do this: sudo add-apt-repository "deb http://archive.canonical.com/ $(lsb_release -sc) partner" and then this: sudo apt-get update && sudo apt-get install skype The terminal told me "that this is potentially harmful..." but I thought it was Ubuntu language meaning "are you sure?" Now the computer is mute. Items cannot be installed or removed until the package catalog is repaired, so I want to repair it but the package operation fails. "sudo aptitude -f install" - command not found Synaptic package manager tells me that I have two broken packages, libc6 and libc6-dev so I do this: sudo apt-get update && sudo apt-get upgrade which tells me to do this: sudo apt-get -f install that ends up like this: Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) When fixing broken packages in synaptic package manager I get this: Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) A package failed to install. Trying to recover: dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. I want to become a linux geek but it is harder than I thought. Please help!

    Read the article

  • LAMP Stack Location

    - by Artem Moskalev
    I have installed the LAMP stack on Ubuntu 12.04 LTS using the tasksel command. I checked - it works. But I cant find the location of the installaton, I worked with WAMP - there you have a separate folder for Apache, for PHP and for mysql. Now I cant even find where to put the documents I create. Which folder is used to contain my web projects? How to start MySQL console and where to look for its installation directory? Which directories are PHP and Apache installed in? how to erase LAMP stack? I found out that some of the parts of the stack are installed in the root/var and root/etc directories: How can I install the whole LAMP stack in /home?

    Read the article

  • Sendmail not working as desired in bash script

    - by dan08
    This is the code I have in a bash script that runs as a cronjob. The cronjob run as root. /usr/sbin/sendmail [email protected]<<EOF subject:Backup Error! from:backup@server01 $error EOF There is code after this and the email I get is as follows: From the root user on the machine. and the message includes: subject:Backup Error! from:backup@server01 $error EOF More code... that is in the script all the way to the end... I have tried other variations, this is the closest I've got. I tried this in a regular script and it worked properly. Whats going on, and how can I send this email, specifying the subject and form sender?

    Read the article

  • "sudo cd ..." one-liner?

    - by j-g-faustus
    Occasionally I want to cd into a directory where my user does not have permission, so I resort to sudo. The obvious command sudo cd somedir doesn't work: $ sudo mkdir test $ sudo chmod go-rxw test $ ls -l drwx------ 2 root root [...snip...] test $ cd test -bash: cd: test: Permission denied $ sudo cd test sudo: cd: command not found Using sudo su works: $ sudo su # cd test Is it possible to make this into a one-liner? (Not a big deal, just idle curiosity :) The variations I tried didn't work: $ sudo "cd test" sudo: cd: command not found $ sudo -i cd test -bash: line 0: cd: test: No such file or directory $ sudo -s cd test The last one doesn't give an error, but it cd's within a new shell that exits by the end of the line, so it doesn't actually take me anywhere. Can someone enlighten me as to why this happens? Why is sudo cd not found, when for example sudo ls ... works fine?

    Read the article

  • How do I make Powertop changes permanent?

    - by arno
    I'm on a Compaq 615 and it's fan is loud as hell. Not much you can do about that but I'm trying to keep the CPU/GPU as cool as possible. This is what Powertop has to say: If I change all of them to "good", the changes don't survive a reboot. Also, upon exiting Powertop I get this: Loaded 8 prior measurements Cannot load from file /var/cache/powertop/saved_parameters.powertop Leaving PowerTOP I added the line to the "grub"-file as suggested here Upon closing gedit I get this: (gedit:2728): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Datei »/root/.local/share/recently-used.xbel.9CIMAW« konnte nicht angelegt werden: Datei oder Verzeichnis nicht gefunden The part in German says: Couldn't be created: File or directory not found.

    Read the article

  • FTP file access problem

    - by Fahad Uddin
    I recently got a malware on my website. I have made the backup of the website on my computer and trying to wipe off my FTP. I am trying to delete the root folder but getting this error message on all of the malicious files, Response: 550 Could not delete index.php: Permission denied I am the sole administrator of the ftp so permission should not have been an issue. My host provider seems not to suffer from this problem as his websites are running well without any malware. I have also tried to change the root to 777 to see if the file permission change could help me delete the files but still I am getting the same error. Please help out. Thanks

    Read the article

  • How disable mysql command in sudoers file?

    - by Carlos A. Junior
    How i can disable /usr/bin/mysql command in sudoers file ? ... Actually I've tryed use with this way: %tailonly ALL=!/usr/bin/mysql But when i'm access if user 'tailonly' of group 'tailonly', this command still enabled. In resume, i'm only want that 'tailonly' user access 'tail -f /usr/app/*.log' ... This is possible ? Edit: With this config, the user 'tailonly' still can access mysql terminal with 'mysql' command: $: sudo su $: visudo Cmnd_Alias MYSQL = /usr/bin/mysql Cmnd_Alias TAIL=/usr/bin/tail -f /jacad/jacad3/logs/*.log # User privilege specification root ALL=(ALL:ALL) ALL # Members of the admin group may gain root privileges %admin ALL=(ALL) ALL # Allow members of group sudo to execute any command %sudo ALL=(ALL:ALL) ALL %swa ALL=/etc/init.d/jacad3 stop %swa ALL=/etc/init.d/jacad3 start %swa ALL=/etc/init.d/jacad3 restart %swa ALL=sudoedit /jacad/jacad3/bin/jacad_start.sh %tailonly ALL=ALL,!MYSQL

    Read the article

  • Giving a Zone "More Power"

    - by Brian Leonard
    In addition to the traditional virtualization benefits that Solaris zones offer, applications running in zones are also running in a more secure environment. One way to quantify this is compare the privileges available to the global zone with those of a local zone. For example, there a 82 distinct privileges available to the global zone: bleonard@solaris:~$ ppriv -l | wc -l 82 You can view the descriptions for each of those privileges as follows: bleonard@solaris:~$ ppriv -lv contract_event Allows a process to request critical events without limitation. Allows a process to request reliable delivery of all events on any event queue. contract_identity Allows a process to set the service FMRI value of a process contract template. ... Or for just one or more privileges: bleonard@solaris:~$ ppriv -lv file_dac_read file_dac_write file_dac_read Allows a process to read a file or directory whose permission bits or ACL do not allow the process read permission. file_dac_write Allows a process to write a file or directory whose permission bits or ACL do not allow the process write permission. In order to write files owned by uid 0 in the absence of an effective uid of 0 ALL privileges are required. However, in a non-global zone, only 43 of the 83 privileges are available by default: root@myzone:~# ppriv -l zone | wc -l 43 The missing privileges are: cpc_cpu dtrace_kernel dtrace_proc dtrace_user file_downgrade_sl file_flag_set file_upgrade_sl graphics_access graphics_map net_mac_implicit proc_clock_highres proc_priocntl proc_zone sys_config sys_devices sys_ipc_config sys_linkdir sys_dl_config sys_net_config sys_res_bind sys_res_config sys_smb sys_suser_compat sys_time sys_trans_label virt_manage win_colormap win_config win_dac_read win_dac_write win_devices win_dga win_downgrade_sl win_fontpath win_mac_read win_mac_write win_selection win_upgrade_sl xvm_control However, just like Tim Taylor, it is possible to give your zones more power. For example, a zone by default doesn't have the privileges to support DTrace: root@myzone:~# dtrace -l ID PROVIDER MODULE FUNCTION NAME The DTrace privileges can be added, however, as follows: bleonard@solaris:~$ sudo zonecfg -z myzone Password: zonecfg:myzone> set limitpriv="default,dtrace_proc,dtrace_user" zonecfg:myzone> verify zonecfg:myzone> exit bleonard@solaris:~$ sudo zoneadm -z myzone reboot Now I can run DTrace from within the zone: root@myzone:~# dtrace -l | more ID PROVIDER MODULE FUNCTION NAME 1 dtrace BEGIN 2 dtrace END 3 dtrace ERROR 7115 syscall nosys entry 7116 syscall nosys return ... Note, certain privileges are never allowed to be assigned to a zone. You'll be notified on boot if you attempt to assign a prohibited privilege to a zone: bleonard@solaris:~$ sudo zoneadm -z myzone reboot privilege "dtrace_kernel" is not permitted within the zone's privilege set zoneadm: zone myzone failed to verify Here's a nice listing of all the privileges and their zone status (default, optional, prohibited): Privileges in a Non-Global Zone.

    Read the article

  • vgaswitcheroo isn't working in Ubuntu 12.04

    - by Forbidden404
    I always used vgaswitcheroo to turn off my discrete graphic, I did a script to turn off in boot, but now, vgaswitcheroo isn't working anymore, I don't know why... look forbidden404@forbidden404-Inspiron-N5110:~$ ls -l /sys/kernel/debug/vgaswitcheroo/switch ls: cannot access /sys/kernel/debug/vgaswitcheroo/switch: Permission denied forbidden404@forbidden404-Inspiron-N5110:~$ grep -i switcheroo /boot/config-* /boot/config-3.2.0-20-generic:CONFIG_VGA_SWITCHEROO=y /boot/config-3.2.0-23-generic:CONFIG_VGA_SWITCHEROO=y /boot/config-3.2.0-24-generic:CONFIG_VGA_SWITCHEROO=y forbidden404@forbidden404-Inspiron-N5110:~$ sudo su [sudo] password for forbidden404: root@forbidden404-Inspiron-N5110:/home/forbidden404# echo OFF > /sys/kernel/debug/vgaswitcheroo/switch bash: /sys/kernel/debug/vgaswitcheroo/switch: No such file or directory root@forbidden404-Inspiron-N5110:/home/forbidden404# ls -l /sys/kernel/debug/vgaswitcheroo/switch ls: cannot access /sys/kernel/debug/vgaswitcheroo/switch: No such file or directory And I'm not using any proprietary driver, k?

    Read the article

  • monitor screen dead.....not even shows bios screen

    - by megatronous
    Re: /host/ubuntu/disks/root.disk does not exist :( ALERT! /host/ubuntu/disks/root.siak does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) (initramfs) alll thought the above problem was solved my issue now is..when i booted my pc again after this solving this to solve the above problem i had pressed e in the grub menu then corrected the partition then after starting i did sudo grub-update then i made some automatic update updates then in next reboot......my screen had gone blank .... and i am not even able to see bios screen....in the start ...the monitior just stays blank..................i have even tried disconnectiong my hard disk but still not able to get the display......solution required ....urgently.....

    Read the article

  • Micromax 3G mobile internet modem not being detected

    - by arjith
    I have Micromax 3G modem, and i inserted it in the USB port, but it is not being detected by Ubuntu 12.04, that i'm using from a Live USB. I tried creating a mobile internet connection, however, eventhough i created it, there is no option to connect. I had previously used 11.10 Ubuntu, and it had automatically detected the datastick modem and asked me to create a connection. On typing lsusb in the terminal it gives the following: **Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 03f0:5307 Hewlett-Packard Bus 001 Device 008: ID 1c9e:9605 OMEGA TECHNOLOGY Bus 001 Device 006: ID 5986:0364 Acer, Inc tried to insert the modem before boot, with negative results **

    Read the article

  • How can I make the Ubuntu Software Center load?

    - by Kieran
    I launch it and it goes grey for almost immediately. Closing it prompts me to "force close" and no error report is given. I launched it in Terminal and this was the resulting log: 2012-11-23 22:39:25,175 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None' 2012-11-23 22:39:25,179 - softwarecenter.db.database - INFO - open() database: path=None use_axi=True use_agent=True 2012-11-23 22:39:25,409 - softwarecenter.backend.reviews - WARNING - Could not get usefulness from server, no username in config file 2012-11-23 22:39:25,412 - softwarecenter.fixme - WARNING - logs to the root logger: '('/usr/lib/python2.7/dist-packages/gi/importer.py', 51, 'find_module')' 2012-11-23 22:39:25,412 - root - ERROR - Could not find any typelib for LaunchpadIntegration 2012-11-23 22:39:25,474 - softwarecenter.ui.gtk3.app - INFO - show_available_packages: search_text is '', app is None

    Read the article

  • Permanent redirect domain to www subdomain without web.config

    - by Lord Simpson
    I've just set up a site via 1and1 and have run into an issue, I want to accomplish the simple task of redirecting the root domain to the www sub domain however due to complications I cant seam to find a way to get it to work. I'm on a Microsoft (asp.net) package so can't use .htaccess, also the IIS server they have doesn't have the URL redirect module installed (so can't use <rewrite> in web.config). They have built in HTTP forwarding options however if I set the root domain to redirect to the www sub domain it just infinitely redirects. Hopefully there is some obvious option/method I've missed during the past two days of searching!

    Read the article

  • Wubi 12.04 installation error executing command command

    - by Erik Lau
    I have tried to install wubi but have not had luck because there is an error executing command: command=C:\Users\Me\AppData\Local\Temp\pyl4266.tmp\bin\resize2fs.exe-f C:\ubuntu\disks\root.disk 17744M retval=1 stderr= stdout=resize2fs1.40.6 (09-Feb-2008) Usage: /cygdrive/c/Users/Eriks/AppData/Local/Temp/pyl4266.tmp/bin/resize2fs.exe-f C:/unbuntu/disks.root.disk17744M [-d debug_flags][-f][-F][-p] device[new_size] I do not understand what is the problem. Here is my log file. https://skydrive.live.com/redir?resid=B4F19CA027FFAD89!324 Please let me know what can be done to fix this error.

    Read the article

  • node-xmpp-bosh error on Ubuntu 11.10

    - by megueloby
    I am newbie in Linux word. I want to implement a bosh server. Because it is hard on Windows platform I decided to deploy it on a Ubuntu virtual machine via vmware. I made installation without problems. I followed the processes on this page. Now I want to test my bosh server with the command sudo bosh or sudo /etc/init.d/bosh start, after typing those I get on the terminal Starting bosh server after, nothing. I looked on the bosh.err file and I see exec: 2: /usr/local/lib/bosh/run-server.js: Permission denied I don? t know why this error with sudo. When I try ls -l /usr/local/lib/bosh/run-server.js it show -rw-r--r-- 1 root root 4889 2012-04-01 18:50 /usr/local/lib/bosh/run-server.js How can I make bosh start?

    Read the article

  • ThinkPad fan control via procfs

    - by asebian
    My ThinkPad W500 used to crash sometimes under heavy load because the automatic control is not speeding up the fan far enough. But I was able to disengage the fan and let it run at full speed in Ubuntu 10.10. But this does not work in my new nice and shiny Ubuntu 11.10. Have a glimpse at fan control device. % ls -l /proc/acpi/ibm/fan -rw-r--r-- 1 root root 0 2012-03-18 15:46 /proc/acpi/ibm/fan % cat /proc/acpi/ibm/fan status: enabled speed: 3056 level: auto Now become super user in a fresh and clean environment and send control sequence. % exec sudo env -i bash -l $ echo 'level disengaged' >/proc/acpi/ibm/fan bash: echo: write error: Invalid argument What did I miss? Thanks for suggests.

    Read the article

  • jWIN JC-AM100 not working

    - by Tony Kilgore
    jWIN JC-AM100 not working in skype, i just see black and the little light that comes on the webcam showing its in use does not come on ether, but it works with cheese but its upside down. =[ lsusb: Bus 002 Device 012: ID 093a:2620 Pixart Imaging, Inc. Bus 002 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. Bus 002 Device 005: ID 046d:c05a Logitech, Inc. Optical Mouse M90 Bus 002 Device 004: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<

    Read the article

  • How to recognize an optimus laptop?

    - by kellogs
    kellogs@kellogs-K52Jc ~ $ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 80) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 80) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80) 03:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 80) 03:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) kellogs@kellogs-K52Jc ~ $ inxi -SGx System: Host: kellogs-K52Jc Kernel: 3.5.0-17-generic x86_64 (64 bit, gcc: 4.7.2) Desktop: KDE 4.9.5 (Qt 4.8.3) Distro: Linux Mint 14 Nadia Graphics: Card: Intel Core Processor Integrated Graphics Controller bus-ID: 00:02.0 X.Org: 1.13.0 drivers: intel (unloaded: fbdev,vesa) Resolution: [email protected] GLX Renderer: Mesa DRI Intel Ironlake Mobile GLX Version: 2.1 Mesa 9.0.3 Direct Rendering: Yes kellogs@kellogs-K52Jc ~ $ lshw [...] *-display description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 18 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:e080(size=8) Manufacturer advertises the K52Jc model which I bought as optimus enabled. However, no traces of it in the output above. Of course, Bumblebee would not start on this machine. Should I rest assured that is a defective / un-optimused machine ?

    Read the article

  • Vostro 3560 Wireless on Ubuntu 12.10

    - by ngille
    I have been using Ubuntu 12.04.1 LTS on a Dell Vostro 3560 for some time now. At first I had issues with the wireless but I was pointed to a driver from Ubuntu 11.xx for a Broadcom BCM43142 and that did work! however with the upgrade to 12.10 I find myself at a lost because the driver will not work anymore. When trying to reinstall it I get "Driver of bad quality" I still install it but it just wont work. I cant seem to find anything on this issue for 12.10 and didn't know if anyone had any advice or if someone could point me in the right direction on resources to write my own driver for it. As I know C/C++ but have never written a driver for a Linux machine before. Thanks for any help! To be more clear I installed Ubuntu 12.10 Desktop on my Dell Vostro 3560 laptop. When I log in, my wireless card isn't visible in the Network Manager popup menu, although the wired network shows up there. I installed the driver mentioned below and that did help me on 12.04 but is now broken due to "Poor quality" a sudo lspci -nn command brings up: 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC Controller [8086:1e57] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 07) **02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)**

    Read the article

< Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >