Search Results

Search found 5789 results on 232 pages for 'tuner card'.

Page 179/232 | < Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >

• Asus N46VZ prouduces more heat when on ubuntu compared to windows

  - by Blaze Tama

  First, i just used ubuntu as my main operating system, so please bear with me. My Asus N46VZ temps is pretty high when im on ubuntu (13.10). The temps are 60C even though i just open a browser. This does not happened on windows, where the temps is just around 50C. I did some research and some people said that the problem might be on my graphic card. I have an intel HD 4000 and GT 650m. So i tried to check my system settings and it said im using "Intel® Ivybridge Mobile". So, i tried to check the "additional drivers" tab on software & update settings but i found nothing there. The point is, i still dont know what make my laptop "overheating". The VGA part is just my guess (and is still dont understand what is the correlation between my VGA and the heat, and everything except the temp seems fine). Any help is appreciated. Thanks for your help :D

  Read the article

• NVIDIA Graphics - resolution problems with new 12.04 LTS installation

  - by Daveisuser56810

  I've been trying to install Ubuntu 12.04 LTS on my desktop most of the day. The desktop uses a NVIDIA GEFORCE 9800 (GT I think) graphics card. I am unable to set the correct resolution (1680 x 1050) for the display. The first problem I had was that of the "Black Screen" during install. I overcame this by utilising the "nomodeset" switch on the install options (once I'd found how to do that). The second problem of course was the "Black screen" following the first reboot. Once again this was overcome by using "nomodeset", this time by "editing" the GRUB. This gave me a resolution of 1280x768 which, the Displays GUI allowed me to change to 1280x720 (appears to fit on screen). I then tried to install the NVIDIA drivers. 1) using additional drivers 2) manually by downloading driver and installing in root As soon as NVIDIA drivers are installed - resolution become restricted to 640x480 (max). At this resolution Ubuntu GUI is not usable as most screens are larger than the display. Removing the NVIDIA driver and removing the XORG.CONF file does not lift this restriction. I have tried most things that I have found and that were vaguely intelligible, but nothing appears to get me closer to a resolution of 1680x1050. UPDATE: reinstalled Ubuntu 12-04 and used the "NoModeSet" in the Grub to restore the resolution to 1280x720, which is at least usable. Will live with this for now.

  Read the article

• HP Envy 15 3040nr sound issues

  - by Lenny

  I have successfully set up my Envy 15" for Ubuntu 12.04 except for the sound, anyone have any ideas about how to get it working? I had to blacklist snd-usb-audio to my alsa to stop pulseaudio from freezing on login and logout, but now no sound plays. Could anyone provide me with some guidance? lspci info 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.2 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] 09:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 (rev 34) 0a:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 10:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) 11:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)

  Read the article

• NVIDIA proprietary driver logging me to console instead of GUI

  - by Woozie

  Firstly i want to apologise for any mistakes, English is not my native language. My problem is I can't get NVIDIA proprietary drivers to work. I tried to install it on Ubuntu 12.04.1 32 and 64 bits, Ubuntu 12.10 Beta 2, Linux Mint 13 Cinnamon 64 bits and openSUSE 12.2 64 bits and the error code and symptoms (logging to tty1 instead of GUI logging, low-res bootscreen) are the same for all of these distros. Right, I didn't tell what's the error code. It appears on sudo startx. NVIDIA: could not open the device file /dev/nvidia0 (Input/output error). I know that's the common problem, but I tried to blacklist or even remove the noveau drivers, install NVIDIA driver from repo/from official script/in "Additional drivers", editing xorg.conf and using Xorg -configurate and nvidia-xconfig, actualizing the kernel and entire distro and many, many things that I don't remember. But the problem is even better: entire Cinnamon (Mint) is freezing during the work. I found the error code, which appears during the freeze: Oct 1 20:57:17 WoozieLaptop kernel: [ 308.120176] [drm] nouveau 0000:01:00.0: PFIFO_CACHE_ERROR - Ch 4/1 Mthd 0z0060 Data 0xbcef0201 My Xorg.0.log is here. It was made on Ubuntu 12.04.1 after installing NVIDIA drivers (obviously). inxi -G from Mint: Graphics: Card: NVIDIA GT216 [GeForce GT 240M] X.org: 1.11.3 drivers: (unloaded: nvidia) FAILED: nouveau,vesa,fbdev tty size: 80x25 Advanced Data: N/A for root out of X lspci -k | grep -A2 VGA from Mint: 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 240M] (rev a2) Subsystem: Lenovo Device 38ff Kernel driver in use: nvidia My hardware is: Lenovo IdeaPad Y550 Intel C2D T6600 NVIDIA GeForce GT 240M 4 GB of RAM Any help will be appreciated. This problem totally disabled my laptop from daily using. Cheers, Woozie

  Read the article

• Make the sound louder in Lubuntu

  - by Andrew

  I have a Toshiba r835 running Lubuntu 11.10. Turning the volume slider up all the way doesn't give very loud sound. I've tried typing alsamixer in a terminal and turning up all the levels there to maximum, but the speakers are still fairly quiet. Is there a simple way to increase maximum volume in software? I understand that there are physical limits to the sound the laptop's speakers can produce, but I suspect my maximum volume is limited by software. EDIT: This is exactly the type of solution I'm looking for. However, it doesn't work for me. What I did: sudo pico /etc/asound.conf This file does not exist, so I create a new one, containing: pcm.!default { type plug slave.pcm "softvol" } pcm.softvol { type softvol slave { pcm "dmix" } control { name "Pre-Amp" card 0 } min_dB -5.0 max_dB 20.0 resolution 6 } I reboot the machine, and type alsamixer. I use my left/right arrow keys to inspect the various volume options. I expect to see a new option, called Pre-Amp, but I don't see one. This fix seems to work for other people. Why doesn't this fix work for me?

  Read the article

• How to make pulseaudio and ubuntu detect the same audio device as alsa driver

  - by Kiwy

  I use Ubuntu 14.04 x64 and I use gnome-shell on my laptop. I have a Bose companion 5 (which is basically a USB sound system) and a HDMI port, both does work perfectly when I just boot with the cable plugin. However, when my laptop go to sleep or get unplugged from those two outputs, if I plug back the device, I end up without any hardware detection (only the built-in speakers) from pulse and gnome-shell sound output selector while if I use alsamixer, the device look up and ready. gstreamer-properties allow me to select and test effectively any device but while alsa recognize any device on the run, pulse is not capable of handling things correctly, my question is then: How can I make pulse detect and use the same hardware as alsa, or how to remove completely and gracefully pulseaudio (meaning volume applet running in gnome shell) I don't mind if the project implies to recompile half gnome shell if it implies those audio outputs work all the time. Pulse does not list my soundcard when I use command pactl list cards while the module plug&play for sound card is loaded in pactl list modules. I really don't know what to do, the behavior seems pretty random.

  Read the article

• Dark screen when wake / Unable to control screen brightness

  - by John

  Running Ubuntu 11.04 on Lenovo ThinkPad with an Nvida graphics card. The unit goes to sleep when the lid is shut. (The unit goes to suspend mode (not to disk/hibernate), AC gets turned off, running on battery) Upon lid-open sometimes the screen is almost too dark to read. I'm really not sure of the exact cause, (very low batt??). The only fix is a reboot. The screen brightness buttons have never worked in Ubuntu. I have messed w/ the power management preferences. No change. At one point I messed w/ the gnome settings. No change. I have tried a few cmds: echo 9>/sys/class/backlight/acpi_video0/brightness setpci -s 00:02.0 F4.B=10 xgamma -gamma .75 None of these help. Most have zero effect. I think it is and acpi thing, but that is just a guess. I'm out of idea's, and looking for suggestions. Thanks

  Read the article

• Intel graphic chipset and NVIDIA Geforce GTX560

  - by antoine

  I have an NVIDIA Geforce GTX560 with two video projectors and I would like to use the onboard Intel Graphic Chipset to plug an additional monitor. I saw the question : How can I use both Intel onboard and Nvidia graphics at the same time? but the answer is so short that I was not convinced. My motherboard (GIGABYTE GA-H61M-D2P-B3 (rev. 1.0)) equipped with Intel H61 Chipset allow shared memory between onboard and PCIe cards. And Windows 7 allow me to use the three outputs thanks to Intel's driver. I'm able to use the onboard graphic card but without graphical interface for now. I think i need intel driver for that. But I would like to know if I can setup my displays in xorg.conf with something like : Section "Device" Identifier "Device0" Driver "intel" EndSection Section "Device" Identifier "Device1" Driver "nvidia" EndSection Section "Device" Identifier "Device2" Driver "nvidia" EndSection Does anyone have successfully setup something like that ? Or should I burn my head experimenting it by myself ? Or is there any good reasons to discouraged me to try ? Thanks for your help. Antoine PS : i'm using Ubuntu 10.10 for now, but I could switch to another version. PS2 : i also read this : Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10? which doesn't tell me more about the possibilities to use Intel Graphic and Nvidia at the same time EDIT : according to that : Can not get Dual Monitors to work on Different GPUs, I should be able to run two Xserver one on Intel the other on Nvidia. I will try and post the result here.

  Read the article

• 12.04, nvidia-settings makes one of my dual monitors grey and useless, disables network

  - by Kerrick

  I'm running Ubuntu 12.04 64-bit, Precise Pangolin, with a PNY GTS 250 1GB video card and a monitor plugged into each of the DVI ports. I'm using the proprietary drivers (post-release updates). If I set anything to do with Separate X Screens up in nvidia-settings (and write it to xorg.conf and reboot), my second monitor has a grey background, no menu bar, no ability to have a window on it, the second monitor doesn't get picked up in a screneshot, and if I move my mouse cursor to it it's an ugly black X. Plus, my network is unable to connect to anything. If I subsequently delete /etc/X11/xorg.conf and reboot, everything goes back to working, albeit with a single monitor activated. If I set anything to do with TwinView up in nvidia-settings, my second monitor starts working, but it isn't seen as a second monitor by Ubuntu, so I can't apply color calibration to it separately. Plus, my mouse gets "caught" between the monitors every time I try to move my cursor between the two. What gives? If it helps, this is the xorg.conf that nvidia-settings generates for Separate X Screens.

  Read the article

• 14.04 LTS Unity no longer boots after last 94 MB update

  - by Harryg123

  I am running 14.04 LTS, Unity, on an HP Pavillion 15, 4GBRAM, 750 GB hdd, I-5 machine, with AMD 8600M graphics card built in. I have disabled the dash and all Ubuntu spyware. I have been faithfully loading all updates as they appear. This morning it asked for a 94 MB update (bringing kernel to .27, I think. Now, I can boot, get to login screen, but it freezes after that. Keyboard doesn't work at that point, but mouse does. I booted into recovery mode, tried to run in generic graphics mode, -- system again froze. I also pressed [esc] during boot, but saw nothing strange; then text disappeared and was replaced by login screen. I am not a hobbyist; this is a production machine and I have a lot of work to do today. Having a standard software update render my machine completely useless... sigh. Perhaps the simplest thing to do would be to revert to the previous configuration. How do I do that? I can boot into recovery mode. But I have no idea how to proceed. TIA for all help. -Harry

  Read the article

• Low graphic mode after switching to fglrx drivers

  - by MrKenkadze27

  I have another problem on my laptop after trying to fix another issue. So, because of this issue, I wanted to switch to fglrx to fix it and after restart, I got this screen: I went back to terminal and I got rid of this problem by "purge"-ing the fglrx driver and removing it, going back to problem number one. I tried lot of methods to fix this such as this ones but they ether switched back to open-source drivers or didn't helped at all. So would anyone like to help? maybe give some commends to try? My Laptop has 2 GPU, AMD Radeon HD 7650M and Intel(R) HD Graphics 4000. AMD is running always making my laptop too hot. Here's one of the Xorg.5.log file paste, I am sure it will be useful finding my problem. Thanks! Please make answer easy to understand as I am not an expert, this problem is keeping me from being one. Also the AMD driver which can be downloaded from their site doesn't install, it says non compatible graphics card but Ubuntu Software Updater sure installs it.

  Read the article

• SQL SERVER – Caption the Cartoon Contest – Last 2 Days

  - by pinaldave

  Developer’s life is very interesting, we often want to start my day early at a job so we can go home early. However, the day never comes as the life of the developer is always about working late hours. If the developer goes to the office early – there are good chances that his co-workers will come late. Additionally, I am confident that there will be always something urgent for developers or DBA to solve right at the time they are ready to go home. This is the life of the developers!  Here is the interesting story of a DBA who was about to go to the home. He had to take his girlfriend to a movie and dinner in 30 minutes. However, his manager asks him to fix the performance related issues with their production server. In normal case, he had only two choices a) Job or b) Girlfriend. Well, our super hero DBA decided to use efficient tools and improve the performance of the production server in merely 30 minutes. When he was done, his manager was absolutely surprised by his efficiency and accuracy of the work. He asked him following question - Here is the contest – you need to guess what was the answer of our Super Hero DBA. If you guess the answer correct you may win Star Wars R2-D2 Inflatable Remote Controlled device. Additionally, if you Download DB Optimizer before Dec 8, 2012 – you will be eligible for USD 25 Amazon Gift Card (there are total 10 such awards). Please do not leave comments in this thread – to participate in the contest – please leave a comment here in the original contest page. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Can't shutdown Ubuntu (Wubi Installation)

  - by zsgre3nd3s7

  I downloaded Ubuntu 12.04 using Wubi. The installation went correctly and everything was working fine until I tried to shutdown. I clicked shutdown and then Ubuntu started shutdown, but as soon as I saw the Ubuntu logo with blank dots under, it froze. I had to perform a hard shutdown. After booting my computer back and going into Ubuntu, I tried shutting it down again but this time it took me on a black page with lots and lots of log writing on the screen and after a little while, it stopped writing stuff. I was able to input characters using the keyboard and everything, but it never shutdown. I had to perform a hard shutdown again. Now it always gives me a Ubuntu logo and freezes. What should I do? I know hard shutdowns are bad and want to avoid them. Is there anyway to make shutdowns work? I tried a reboot and it also froze on the Ubuntu logo. Sony VAIO Model E SVE17115FDB Laptop. Graphic card - AMD RADEON HD 7650M (and it installed correctly in Ubuntu). BIOS - H2O Bios. Processor - Intel i7-3612QM. Edit: I only installed the AMD/ATI proprietary drivers FGLRX, not the AMD/ATI post release drivers because they keep showing an error message. Here is jockey.log. Edit 2: Here is the log that i mentioned before that appeared on my screen, it appeared after i tried reinstalling my AMD driver but failed so i reinstalled the other one. Sorry for the quality i took those pictures with my phone.

  Read the article

• AMD FX CPU drivers/patch

  - by Mubeen Shahid

  I am using Ubuntu since 2009 on notebooks with Intel CPUs. However now, that I am using AMD's FX 6300, I am interested in knowing if there exists anything from Ubuntu (specifically any kernel enhancements/drivers/patches) for AMD's FX "family 15h" Piledrivers. Reason: I would like to have a kernel which uses the hardware to its full capacity, be able to use the latest instruction sets, for max. performance. I did some tests, started with compiling stable 3.9.7 on my 12.04 LTS box, and during compilation I choose processor vendor AMD (unchecked Intel/VIA/etc.), and when I started Ubuntu with this compiled kernel, in the section "System Settings - Additional Drivers" I found that, in addition to graphic card's drivers, there were AMD family 15h drivers also. However, I would prefer something in this regard tested/signed by Ubuntu developers. P.S: 1- the kernel that I have compiled has some issues with Nvidia graphics drivers, so I deleted kernel 3.9.7 and installed signed 3.8.xx from Ubuntu repositories. 2- incase if somebody is planning to advise me to install "AMD64", I am not talking about AMD64 (which is in fact for 64-bit platform).

  Read the article

• MPlayer does not work

  - by Soham Pal

  Using the xubuntu desktop, on Ubuntu Raring updated from Quantal. MPlayer never really worked. No video, no audio, nothing. I really can't be any more helpful, so here's the log: petey@home-pc:~$ mplayer "/home/petey/Downloads/Polar Bear Cafe (480p)HorribleSubs]/[HorribleSubs] Polar Bear Cafe - 01 [480p].mkv" MPlayer SVN-r35984-4.7 (C) 2000-2013 MPlayer Team Playing /home/petey/Downloads/Polar Bear Cafe (480p)[HorribleSubs]/[HorribleSubs] Polar Bear Cafe - 01 [480p].mkv. libavformat version 55.0.100 (internal) libavformat file format detected. [lavf] stream 0: video (h264), -vid 0 [lavf] stream 1: audio (aac), -aid 0 [lavf] stream 2: subtitle (ass), -sid 0 VIDEO: [H264] 848x480 0bpp 23.810 fps 0.0 kbps ( 0.0 kbyte/s) Clip info: creation_time: 2012-04-05 21:36:10 Load subtitles in /home/petey/Downloads/Polar Bear Cafe (480p)[HorribleSubs]/ Can't open /dev/fb0: Permission denied [fbdev2] Can't open /dev/fb0: Permission denied VO: [v4l2] No such file or directory vo_cvidix: No vidix driver name provided, probing available ones (-v option for details)! [cyberblade] Error occurred during pci scan: Operation not permitted [mach64] Error occurred during pci scan: Operation not permitted [mga] Error occurred during pci scan: Operation not permitted [mga] Error occurred during pci scan: Operation not permitted [nvidia_vid] Error occurred during pci scan: Operation not permitted [pm3] Error occurred during pci scan: Operation not permitted [radeon] Error occurred during pci scan: Operation not permitted [rage128] Error occurred during pci scan: Operation not permitted [s3_vid] Error occurred during pci scan: Operation not permitted [SiS] Error occurred during pci scan: Operation not permitted [unichrome] Error occurred during pci scan: Operation not permitted [VO_SUB_VIDIX] Couldn't find working VIDIX driver. ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 55.0.100 (internal) Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264) ========================================================================== ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 44100 Hz, 2 ch, floatle, 0.0 kbit/0.00% (ratio: 0->352800) Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio)) ========================================================================== [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory DVB card number must be between 1 and 4 AO: [null] 44100Hz 2ch floatle (4 bytes per sample) Starting playback... Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [null] 848x480 = 854x480 Planar YV12 A: 4.7 V: 4.7 A-V: 0.002 ct: 0.083 0/ 0 22% 0% 0.5% 0 0 MPlayer interrupted by signal 2 in module: sleep_timer A: 4.7 V: 4.7 A-V: 0.001 ct: 0.083 0/ 0 21% 0% 0.5% 0 0 Exiting... (Quit)

  Read the article

• Reverse WiFi to Broadcast connection coming from a USB device

  - by Daniel Clem

  I am using the app called Clockworkmod Tether. It connects using a script ( command line " gksu ./run.sh " ) on the computer. All my programs connect to the internet perfectly, minitube, midori, transmission torrents. But the network manager does not show any connection, wired or wireless. So this may cause issues? What I want to do is take this connection, and be able to share it some way, any way, by wireless. This Acer Timeline "Aspire 5810TZ" does have an Ethernet, so wired out to a router might be an option. But I would prefer to simply reverse the Wireless card to broadcast out to about 2 or 3 devices. Is this possible? Yes I have taken a look at the other questions already posted here, but the answers are 1 year old or older, and not clear at all. I am moderately comfortable (4.5 out of 10 ) on the command line. But pretty much need line by line directions for what commands are needed and what order, ect. Edit I have already tried the method of "Left click network manager, Create New Wireless Network" It is created fine, and I am able to connect to it with a tablet, but am un-able to get an outside connection with it. Using the "Shared to other computers" option because DHCP doesn't seem to work, and WEP Passphrase Security. I get an IP address on the connected device. But as I said, won't bring up any outside webpages or the like. So perhaps this is the wrong approach?

  Read the article

• Radeon 9200 Driver?

  - by usuhh86

  I've been using Linux for a while, but haven't really done more than installed programs. I have Ubuntu 12.04 with an ATI Radeon 9200 graphics card. Ubuntu didn't recognize it during the install. All I want is a driver. Preferably the proprietary driver, but I'll settle for an open-source one if I need to. I went to the AMD support website, and whenever I click on the download link for "ATI Proprietary Linux x86 Display Driver 8.28.8" I get redirected to the main AMD website. I tried this on Firefox, Chrome, even booted up my netbook and tried it on IE9. Does anybody have a download link? And if not, a link to download an open-source alternative? Any help will be greatly appreciated. I'm pretty much still a newbie at this. OpenGL vendor string: Tungsten Graphics, Inc. OpenGL renderer string: Mesa DRI R200 (RV280 5961) x86/MMX/SSE2 TCL DRI2 OpenGL version string: 1.3 Mesa 8.0.2 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: no GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: no Unity 3D supported: no

  Read the article

• Setting up dual monitors, Xorg.conf issues

  - by JTS

  I just got a new computer (W520, Graphics card nVidia GF106 [Quadro 2000]) and installed ubuntu on it using wubi. I have everything working, so I wanted to set it up to be able to use two monitors with an extended screen. I figured I had to edit Xorg.conf, but the file didnt exist. So I tried to create it by booting in recovery mode, and executing Xorg -configure but I am getting these errors: (EE) Failed to load module "vmwgfx" (module does not exist, 0) (EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) [drm] No DRICreatedPCIBusID symbol Number of created screens does not match number of detected devices. Configuration failed. ddxSigGiveUp: Closing log Any idea how I can get Xorg -configure to work, so that I can have an xorg.conf file that I can edit to enable twinview? EDIT: Another way I could ask the same question to solve this problem is, why can't I boot with an xorg.conf file generated by nvidia-xconfig? Is there something in the generated xorg.conf file that might need editing?

  Read the article

• Ubuntu Gnome 14.04 Instal Nvidia drivers

  - by user3524668

  I have been looking all over the web, and tried every suggestion I found to get the nvidia drivers working on my computer with Ubuntu Gnome 14.04, with no luck. Every time I install a driver or choose to use the driver from addition drivers, when I reebot, I cannot log in again. It gets stuck at the logo screen. I need to go to the ALT + CTRL + F1 to purge all nvidia traces so I can get back. Is it possible to install the new nvidia drivers? I just upgraded from 13.10 to 14.04, I have an Asus N550VJ which has hybrid graphics with Intel 4000 / Nvidia 750M What Im looking for is to try the primus functionality to disable the discreet card and enable it whenever I want to play or run heavy graphic stuff. When I was in 13.10 I was using bumblebee, but, since, the nvidia prime is supposedly mature enough, I wanted to try it. Is this possible for Ubuntu Gnome 14.04. I read there was a bug with gdm, but also, saw that it was already fixed. Thank you very much for your help. Im not that well versed in linux.

  Read the article

• Why is wireless slow with Atheros AR9285?

  - by Luke

  I know there are many posts like this, however none of the fixes I have found have worked. I had the issue on 11.04, and after having no luck fixing it decided to try 12.04 however this has not fixed the problem. I'm using a Lenovo IdeaPad, the network card is a Atheros Communications AR9285. edit add outputs: sudo iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"NETGEAR-PLOW" Mode:Managed Frequency:2.437 GHz Access Point: E0:91:F5:7D:1B:BA Bit Rate=65 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:77 Invalid misc:63 Missed beacon:0 eth0 no wireless extensions. lspci -nnk | grep -iA2 net 06:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Lenovo Device [17aa:30a1] Kernel driver in use: ath9k -- 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Lenovo Device [17aa:392e] Kernel driver in use: r8169 Thanks

  Read the article

• System in low-graphics mode

  - by Artem Moskalev

  I am totally new to Linux, and Ubuntu. I bought ASUS X53E Notebook, erased Windows and installed Ubuntu. First it worked ok. Then when I started working with it, i opened the terminal, entered sudo chmod 666 usr and then all the icons from the main panel disappeared + the whole system stopped responding. I decided to restart the system. When restarted, a message appears: the system is running in low graphics mode and below it: Your screen, graphics card and input device setting could not be detected correctly. You will need to configure it yourself. But the "OK" button is disabled and if I press any buttons nothing happens. If I enter Ctrl-Alt-F2 it opens the bash terminal. But there commands sudo or apt-get are not found and it says that permission denied if i try to enter any folder like cd /usr If I enter the su command it asks for the password I don't know. When encountering this problem first, I reinstalled the whole Ubuntu. but today it happened again just the same. What shall I do? maybe there is something wrong with the hardware? If I need to install another distribution of Linux could you recommend one? but I'd rather stick to Debian releases like Ubuntu. so how do I fix the problem? PS: Please give answers in simple terms because am a newbie so i don't know what goes where yet.

  Read the article

• Can't connect to or see my wifi ssid

  - by ant

  Today I installed ubuntu 12.04 on my laptop. I am unable to see my home SSID or even connect to it. I've tried to connect as a hidden SSID but I always get prompted for authorization although my key is correct. I'm in in Europe but my laptop is from US. I'm not sure if that is relevant. I've read around this site and saw something that has to do with setting the channel above 11. I'm not sure I did that correctly I did this : How to use Wi-Fi channels above 11? Did't help. I'm able to connect with cable but not via wifi either windows or linux. Other devices in my home can connect without any issues, even the kindle. Here is the screenshot from my router : Here is some additional info : lspci | grep -i network 08:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) lspci -nnk | grep -A2 0280 08:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Hewlett-Packard Company U98Z062.10 802.11bgn Wireless Half-size Mini PCIe Card [103c:303f] Kernel driver in use: ath9k m-tool NetworkManager Tool State: connected (global) Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: disconnected Default: no HW Address: 90:4C:E5:38:79:0D Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes I'm not sure what to do next. Any suggestions?

  Read the article

• Unity 3D doesn't work on ubuntu 12.04 LTS in virtual box hosted by Windows 7 64bit

  - by Mario

  Can't google out the solution through some time so I'm asking here. I have installed Linux Ubuntu 12.04 LTS in virtual box hosted by Windows 7 64bit Simple my 3D stopped working after some kernel headers update<<< few months ago. Just like that. I don't member which version was it. In meantime there was 2 or 3 new releases of VirtualBox which I have installed. Every time I am updating VirtualBox Guest Additions to the newest version. My 3D in Ubuntu still doesn't work. root@pjadmin-VirtualBox:~# /usr/lib/nux/unity_support_test -p OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no My graphics card in PC is ATI 6850. Please help.

  Read the article

• How do you explain to an "agile" team that they still need to plan the software they write?

  - by user23157

  This week at work I got agiled yet again. Having gone through the standard agile, TDD, shared ownership, ad hoc development methodology of never planning anything beyond a few user stories on a piece of card, verbally chewing the cud over the technicallities of a 3rd party integration ad nauseam without ever doing any real thinking or due dilligence and architecturally coupling all production code to the first test that comes into anyone's head for the past few months we reach the end of a release cycle and lo and behold the main externally visible feature that we have been developing is too slow to use, buggy, becoming labyrinthinly complex and completely inflexible. During this process "spikes" were done but never documented and not a single architectural design was ever produced (there was no FS, so what the hell eh, if you don't know what you are developing, how can you plan or research it?) - the project passed from pair to pair, each of whom only ever focused on a single user story at a time and well the result was inevitable. To resolve this I went off the radar, went (the dreaded) waterfall, planned, coded and basically didn't swap off the pair and tried as much as I could to work alone - focusing on solid architecture and specifications rather than unit tests which will come later once everything is pinned down. The code is now much better and is actually totally usable, flexible and fast. Certain people seem to have really resented me doing this and have gone out of their way to sabotage my efforts (possibly unconsciously) because it goes against the holy process of agile. So how do you, as a developer, explain to the team that it is not "un-agile" to plan their work, and how do you fit planning into the agile process? (I'm not talking about the IPM; I'm talking about sitting down with a problem and sketching out an end-to-end design that says how a problem should be solved in sufficient detail that anyone who works on the problem knows what architecture and patterns they should be using and where the new code should integrate into existing code)

  Read the article

• Is this a dual monitor reset bug?

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) A few minutes after I login to my dual monitor setup, it gets reset to mirror screens. If I restore the settings via the displays application, everything is fine. On each reset, the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset, /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like its interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

< Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >