Search Results

Search found 22447 results on 898 pages for 'cpu load'.

Page 18/898 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • CPU temperatures high on new build after gaming

    - by Reznor
    My friend had a problem with his computer a while back. His games were crashing, even within the menus. He was stumped as to what the problem was, so I posted on here requesting help. He found out the day later, when his computer would start up but wouldn't display anything on the screen. His video card must have came screwed up. So, he got a replacement. Now, there's a new problem. His temperatures, which were acceptable before, are now insanely high. His GPU temperature runs 70-80c, which is understandable considering he's running his games maxed out, but the real problem here is his processor and motherboard temperatures. All four of his cores are running at 88-90c after coming out of a game. His motherboard temperature was also 70c at one point. In terms of cooling, his case should definitely be adequate. He has an Antec Twelve Hundred. He's using stock fans. The cable management in his case is very good; better than average. He's using the stock heatsink with the processor too, but note, it was fine before the replacement, so it isn't like there's some inherent problem. He has checked the case too. Everything's fine! No cables in the way. The heatsink is seated properly. He turned his case fans up to high, as well, but the temperatures are persisting. Could the processor be overheating due to running games maxed out? Any ideas?

    Read the article

  • Common filesystem for servers behind a rackspace load balancer

    - by thanos panousis
    Our PHP application consists of a single web server that will receive files from clients and perform a CPU-intensive analysis on them. Right now, analysis of a single user upload can take 3sec to conclude and take 100% CPU. This makes our system capacity amount to 1/3 requests per second. My team's requirement is to increase capacity without a lot of code reengineering. A possible solution would be to set up a load balancer in front of multiple servers running the same app, connecting to a common DB. The problem is that the analysis outputs files on disk. A load balancer would increase capacity, but then files won't be available between servers so consequent client requests may fail. We are hosted on Rackspace, is there a way to configure some sort of "common" storage for all servers, without having to rewrite our file persistance code? Current code relies on simple fopens etc. What are our options?

    Read the article

  • 100% CPU when doing 4 or more concurrent requests with Magento

    - by pancake
    Currently I'm having trouble with a server running Magento, it's unbelievably slow. It's a VPS with a few Magento installations on it used for development, so I'm the only one using them. When I do 4 request all 2 seconds after each other I'm finished in 10 seconds. Slow, but still within the limits of my patience. When I do 4 "concurrent" requests, however (opening 4 tabs in a row, very quickly) all four cores go to 100% and stay there for like a minute. How is this possible? I know that there are a lot of possibilities here, so any tips on how to make an Apache/PHP server go faster are also welcome. It used to go a lot faster before, and I've also tried APC, but it kept causing problems (PHP errors, something with memory pools) so I've disabled it. By the way, the Magento cache is off and compiling is also off. I know this makes Magento slower than usual, but I don't think a 60 second response time is normal for any Magento installation. Virtual hardware: 4 Cores and 4096MB RAM Swap is never used (checked with htop) 100GB disk space, of which 10% is in use Software: Debian 6 DirectAdmin and apache custombuild PHP 5.2.17 (CLI) If you need more info, please tell me how to get it, because I probably don't know how. I do know how to use the command line in linux and the usage of quite a few commands, but my experience with managing a server is limited.

    Read the article

  • CPU Cores: The more the better?

    - by T Pops
    I currently have a dual-core processor at work and a quad-core at home. I've noticed both PCs are pretty equal as far as launching applications/surfing the web. The difference I can see is that my dual-core is 2.8GHz and my quad-core is 2.4GHz. Is it better to have a dual-core with a fast clock speed or a quad-core with a mediocre clock speed?

    Read the article

  • CPU/RAM usage log over a period of time to file on CentOS

    - by joel_gil
    Hi everyone Im looking for an app pr line of code that could let me observe a process, save the info in a number of variable and then put the gathered info on a file. Ive been trying with variations of top but no luck. I am running several CentOS virtual servers, VM is 2gb ram 2 processor. Maybe a script that works over a specified amount of time while writing lines with the info on a text file so at the end i can have a sort of table with the data. The thing is Im going to stress test the server and I would like to have the data to make some statistics. Any comments and suggestions are most welcome.

    Read the article

  • 100% CPU use when new usb device plugged in - services.exe / Windows Server 2003

    - by Will3265
    On my server I am trying to install a new usb drive but all that happens is that the system starts using huge amounts of processor cycles with services.exe. On closer inspection with process explorer there is a thread called umpnpmgr.dll using most of the services.exe processor time. I left it for a half hour and still nothing happened. Rebooted and tried again, same result. Tried a different usb drive, then a flash drive but still same issue. Tried updating driver but it said the update function was already in action. I have used process explorer to kill the thread now so the server can still perform its intended functions. Any device that was previously installed before this began happening will still work but any device new to the system will not. My question(s) is/are: Is there a way to manually install the device into the registry so Windows thinks it is a previously installed device? Or can this problem be repaired through anything other than a reinstall? To do a reinstall would mean backing up large amounts of data which is hard with a usb drive and insufficient space on all other network machines. Any help would be greatly appreciated. William

    Read the article

  • Failover or load balancing configuration on Apple Xserve and Mac OS X Server Snow Leopard (10.6)

    - by Alasdair Allan
    I'm currently installing a number of Apple Xserve boxes running Mac OS X Server (10.6). After poking and prodding for a while I can't find any obvious way, or documentation telling me how, to set up the 2 ethernet ports in a failover or load-balancing configuration. There seems to be an obvious way to do link aggregation, but not failover or load-balancing? What's the default configuration if I enable both ports with the same (manually configured) IP address?

    Read the article

  • Tools for load-testing HTTP servers?

    - by David Wolever
    I've had to load test HTTP servers/web applications a few times, and each time I've been underwhelmed by the quality of tools I've been able to find. So, when you're load testing a HTTP server, what tools do you use? And what are the things I'll most likely do wrong the next time I've got to do it?

    Read the article

  • Investigate high load on RHEL

    - by Adam Matan
    One of my RHEL 5 was showing high load (~4-5) on uptime. The load increased, and when it reached 6 (±), the server froze and needed restart. top-wise, the server had no significant CPU or memory issues and sar showed no increase in iowait. Therefore, the thrashing must have been related to other factors. Any ideas how to investigate this? In particular, how do I know that which processes are waiting in the queue?

    Read the article

  • Tomcat - Spring Framework - MySQL, Load balancing design

    - by Mat Banik
    Lets say I have Spring Framework App that is running on Tomcat and uses MySQL database: What would be the best solution in this instance that would allow for sociability (price/performance/integration time)? More precisely: What would be on the Web Load balancer box, and who should be the tomcat web server clustered? What would be on the Database Load balancer box and how should be the database servers clustered? And if at all possible specific technical integration links would be of great help.

    Read the article

  • Disk IO causing high load on Xen/CentOS guest

    - by Peter Lindqvist
    I'm having serious issues with a xen based server, this is on the guest partition. It's a paravirtualized CentOS 5.5. The following numbers are taken from top while copying a large file over the network. If i copy the file another time the speed decreases in relation to load average. So the second time it's half the speed of the first time. It needs some time to cool off after this. Load average slowly decreases until it's once again usable. ls / takes about 30 seconds. top - 13:26:44 up 13 days, 21:44, 2 users, load average: 7.03, 5.08, 3.15 Tasks: 134 total, 2 running, 132 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.1%sy, 0.0%ni, 25.3%id, 74.5%wa, 0.0%hi, 0.0%si, 0.1%st Mem: 1048752k total, 1041460k used, 7292k free, 3116k buffers Swap: 2129912k total, 40k used, 2129872k free, 904740k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1506 root 10 -5 0 0 0 S 0.3 0.0 0:03.94 cifsd 1 root 15 0 2172 644 556 S 0.0 0.1 0:00.08 init Meanwhile the host is ~0.5 load avg and steady over time. ~50% wait Server hardware is dual xeon, 3gb ram, 170gb scsi 320 10k rpm, and shouldn't have any problems with copying files over the network. disk = [ "tap:aio:/vm/dev01.img,xvda,w" ] I also get these in the log INFO: task syslogd:1350 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syslogd D 00062E4F 2208 1350 1 1353 1312 (NOTLB) c0ef0ed0 00000286 6e71a411 00062e4f c0ef0f18 00000009 c0f20000 6e738bfd 00062e4f 0001e7ec c0f2010c c181a724 c1abd200 00000000 ffffffff c0ef0ecc c041a180 00000000 c0ef0ed8 c03d6a50 00000000 00000000 c03d6a00 00000000 Call Trace: [<c041a180>] __wake_up+0x2a/0x3d [<ee06a1ea>] log_wait_commit+0x80/0xc7 [jbd] [<c043128b>] autoremove_wake_function+0x0/0x2d [<ee065661>] journal_stop+0x195/0x1ba [jbd] [<c0490a32>] __writeback_single_inode+0x1a3/0x2af [<c04568ea>] do_writepages+0x2b/0x32 [<c045239b>] __filemap_fdatawrite_range+0x66/0x72 [<c04910ce>] sync_inode+0x19/0x24 [<ee09b007>] ext3_sync_file+0xaf/0xc4 [ext3] [<c047426f>] do_fsync+0x41/0x83 [<c04742ce>] __do_fsync+0x1d/0x2b [<c0405413>] syscall_call+0x7/0xb ======================= I have tried disabling irqbalanced as suggested here but it does not seem to make any difference.

    Read the article

  • What does transactions per seconds for a load balancer mean

    - by Anurag
    I was looking at the product matrix of webmux 592G(load balancer). It says maximum connections per sec = 2.8M Maximum number of transactions = 100,000 What does the above numbers mean. Does above means that load balancer can have 2.8M connections open but only 100K of them will be active per seconds. Also incase any one has used webmux 592G do you guys know in practice how many connections it can have open and what qps it can serve

    Read the article

  • Alternatives for load balancing Tomcat webapp?

    - by Mahriman
    We wish to enable some form of load balancing for a Tomcat webapp we're currently using today. Unfortunately, I know almost to nothing about Tomcat load balancing, clustering and so on. Can anyone share resources that cover the different alternatives, give some handy pointers (maybe some solutions work better in certain types of environment?) or just some tips on solutions to try out? We're currently running Tomcat 5.5 if that makes any difference in features, however no critical obstacles for upgrading to 6.

    Read the article

  • Servers behind load balancer

    - by Tom
    We have a CISCO hardware load balancer with two web servers behind it. We'd like to force some URLs to only be served by one of the machines. Firstly, is the job of the load balancer? or would a better approach be create a subdomain such as http://assets.example.com which would be automatically be routed to one of the servers?

    Read the article

  • Do i need a dedicated server for load balancing?

    - by Ben
    I'm completely new to the concept of load balancing so i hope this question isn't a "stupid question" because i've been searching around and im having a hard time understanding this. So to my understanding, in order to load balance, i need a separate machine with an ip address i can direct all traffic to. I initially thought i needed to rent 3 dedicated servers, one for load balancing and the other two as backend servers. Would a dedicated server be too much for a load balancer or do hosting companies have special types of computers for that process? Then i read somewhere else that i can install a load balance software in both of the two servers and configure it in a way that doesn't require me to rent another machine/dedicated server for load balancing. So im a bit confuse on how to actually implement a load balancer and whether or not i need a dedicated server for the sole purpose of acting as a load balancing machine. Also, i was recommended to use HAproxy so i'll be heading that direction for load balancing.

    Read the article

  • Can I put a laptop Core i7 CPU in a desktop?

    - by Weezy
    One of the most important thing to me for a CPU is a good mix between speed and heat. For example five years ago I bought a Core 2 Duo 6300 (max TDP 65W): I put a big heatsink on the CPU, no fans (I do hate moving parts and noise) and it worked like a charm and very silently for five years (and it still work but five years later I wouldn't mind a faster CPU and a faster memory controller and more memory). I consider a max TDP of 130W unacceptable (like some high-end Core i7 have), for several reasons. So I was wondering: can I build a desktop and put a Core i7 CPU meant to be used in laptop in it? For example I was thinking about the Core i7 740QM (max TDP 45W [!]). Are these compatible with desktop Core i7 motherboards? (for example on NewEgg it says that the "CPU socket type" for the Core i7 740QM is PGA988, I've not too sure about what this is)

    Read the article

  • Task Manager: CPU usage history

    - by Nezdet
    I bougth recently a server with 2 x X5550, they are quad (4 cores each) total 8 cores If I check the task manager it shows in the CPU usage history 16 diagrams, Should't it be 8 cause I have 2 processors with quad? or the diagrams maybee shows the Threads of the CPU?

    Read the article

  • Cpu schedule, removing thread from queue

    - by Kamil
    I'm implementing now CPU schedule algorithms FCFS, SJF and Round Robin. Could somebody tell when process is removed from queue (FCFS,SJF,RR)? I mean, first CPU execute thread and after executing remove from queue or the other way around?

    Read the article

  • usleep() php5 uses 40% of idle CPU

    - by Marcin
    Hi guys I have a weird question, I have a cli php script which uses usleep (somtimes 1sec, sometimes 2sec, somtimes 100ms it depends) if there is some wait required, but what I have noticed its that once on usleep() it seems to use about 40% of idle CPU: Cpu(s): 5.3%us, 21.3%sy, 0.0%ni, 57.2%id, 0.0%wa, 0.0%hi, 0.0%si, 16.1%st any ideas ? cheers

    Read the article

  • weird problem with load () or live () !!

    - by silversky
    I load a page with load () and then I create dinamically a tag. Then I use live() to bind a click event and fires a function. At the end a call unload (). The problem is that when I load the same page again ( without refresh ) when on click the function will be fired twice. If I exit again (again with unload ()) and load the page again on click will fire 3 times and so on .... A sample of my code is: $('#tab').click(function() { $('#formWrap').load('newPage.php'); }); $('div').after('<p class="ctr" ></p>'); $('p.ctr').live('click', function(e) { if($(e.target).is('[k=lf]')) { console.log ('one'); delete ($this); } else if .... }); function delete () { $.post( 'update.php', data); } I have other $.post inside on this page and also on the above live fnc and all work well. The above one also works but like I said on the second load will fire twice and the 3 times and so on ... The weird part for me is that if replece the console with console.log ('two'); save the page and load the page without refresh it will fire on a different rows - one two - if I unload the page replace the console with console.log ('three'); and load again will fire one two and three. I try to use: $.ajax({ url: 'updateDB.php', data: data, type: 'POST', cache:false }); $.ajaxSetup ({ cache: false }); header("Cache-Control: no-cache"); none of this it's working. And I have this problem only on this fnc. What do you think, it could be the reason, it remembers it remembers the previous action and it fires again?

    Read the article

  • How can I get my mysqld-swamped CPU under control?

    - by Shay Guy
    I was AFK for about 24 hours and came back to find gnome-system-monitor saying all four CPU cores on my laptop were running at full throttle. mysqld is taking up more than one full core; when I tried to end the process, it restarted with a new PID. Then there's ksoftirqd/0-3, which apparently has something to do with interrupts, but I can't tell from Google what I'm supposed to do with those four particular processes. They're taking up a quarter or more of my processor cycles. Then there's Chrome, but I can probably handle that on my own -- how do I cool down the other processes giving me problems?

    Read the article

  • Azure load-balancing strategy

    - by growse
    I'm currently building out a small web deployment using VM instances on MS Azure. The main problem I'm facing at the moment is trying to figure out how to get the load-balancing to detect if a particular VM has failed and not route traffic to that VM. As far as I can tell, there are only only two load-balancing options: Have multiple VMs (web01, web02, web03 etc.) within the same 'cloud service' behind a single VIP, and configure the endpoints to be load balanced. Create multiple 'cloud services', put a single web VM in each and create a traffic manager service across all these services. It appears that (1) is extremely simplistic and doesn't attempt to do any host failure detection. (2) appears to be much more varied, but requires me to put all my webservers in their own individual cloud service. Traffic manager appears to be much more directed at a geographic failover scenario, where you have multiple cloud services across different regions. This approach also has the disadvantage in that my web servers won't be able to communicate with my databases on internal IP addresses, unlike scenario (1). What's the best approach here?

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >