Search Results

Search found 22380 results on 896 pages for 'hard drive failure'.

Page 18/896 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Installing Ubuntu to a USB drive

    - by Carl Smotricz
    I'm having a rough time getting Ubuntu to run from a 250 GB USB hard drive. I booted Ubuntu 9.10 from a CD and ran the regular "install" to the attached USB drive. I used the "advanced" option on the drive partition question to put the boot loader on /dev/sdb (the USB disk) but when I boot the machine it doesn't recognize there's a boot loader on the USB drive (it offers to boot from 2 other devices but not the USB disk). I also tried booting from the Ubuntu CD and using usb-creator-gtk to set up the USB drive. Seems to me this is meant to work with flash drives. I got a bootable USB disk but it looked and worked like the CD, i.e. it gave me options of "live CD" operation, installing, memtest, etc. That's not the way I want to run the system. Some help in installing Ubuntu, bootable into a "full" running system on my USB drive would be appreciated.

    Read the article

  • Gateway GT5220 Boot/POST Failure

    - by John Rudy
    I have a Gateway GT5220 I'm troubleshooting. It is, in fact, the machine I just gave my father for his birthday a couple months ago. (Prior to that, it was my home PC. My home PC is now the MacBook on which I'm writing this.) Before going any further, I suspect that the answer will be, "It's worse than that, it's dead, Jim, it's dead, Jim, it's dead, Jim." At least, mobo and/or CPU. The initial symptoms were as follows: Turn on power All fans fire up (thus making it so I can't hear if the hard drive is spinning or not, nor are my hands sensitive enough anymore to feel it) No LEDs remained lit on the front panel. (Initially, the hard drive indicator flashed briefly.) No beep, no video, no nothing. Following some advice I found here, I tried to "drain the stored power." After following those steps, the new symptoms were: Turn on power All fans fire up The front panel LEDs remained lit! After about 20, maybe 30 seconds, we had video! Sort of. We got to the Gateway splash/POST screen, which appeared thoroughly corrupted. How corrupted? Well, I imagine it's what a POST screen would look like after reading the wrong passage out of the Necronomicon: It stayed there. I gave it at least 5, maybe 6 minutes, and it didn't move. So I shut her down, started her up again, and now (this is where we currently stand, symptomatically) we have this: Turn on power All fans fire up The front panel LEDs remain lit No video, no beep, no nothing. I'm a software guy; haven't done real hardware troubleshooting in years. My gut tells me that the mobo and/or CPU is fried, and unfortunately my gut didn't get to be as big as it is being wrong all the time. :( In addition to the link above, I have read all of the following (trying to save you some LMGTFY trouble): Gateway Support POST Error Messages and Handling About a zillion (useless) POST beep code sites A kioskea.net post indicating that most likely we're at what I consider "total loss" (mobo and/or CPU) My questions: Are there any conditions other than mobo/CPU that could cause symptoms like these? Is it worth my time to try the next hardware troubleshooting step?(IE, remove all non-critical hardware from the machine, try to boot, systematically replace one by one until we find the failing component) Which mobos will fit in the Gateway GT5220 case (with rear ports correctly aligned)? (Why this is not a dupe: I wouldn't have posted this question if it hadn't been for the funkadelic possessed video display on the one occasion we got video out. I think that justified this not being an exact dupe. Of course, if the community overrules, I will understand.)

    Read the article

  • How to format drive with partitions

    - by halogenp
    Hi, I have a drive with 3 partitions - Vista, Ubuntu and just storage. Im used to creating an formatting partitions. However I have never formatted a entire drive with partitions. Any pointers to resources would be great. Again I wish to format the entire drive removing the partition. Thanks.

    Read the article

  • Appropriate USB enclosure to use with an Ultra ATA drive

    - by Topdown
    I have a friend with a broken iBook, but we wish to recover the hard disk. I haven't seen the drive itself, however the spec lists it as an "Ultra ATA drive". Could you please advise if this is 100% compatible with any standard USB IDE 2.5inch enclosure? Full spec: iBook 12" 1GHz(AP) 256MB DDR266 SDRAM built-in Keyboard/Mac OS X Bluetooth Module 40GB Ultra ATA drive Combo (DVD-ROM/CD-RW).

    Read the article

  • Utility for easily disabling/enabling extra hard drives?

    - by SkippyFire
    I just got an Asus G60 laptop, and will be installing an SSD as the primary, and will use the existing HDD as a storage drive. Is there a utility that I can use to turn off/disconnect the storage drive when I'm not using it? Mainly, I want to be able to conserve power when I'm mobile, since the battery life of this laptop is pretty weak. Thanks in advance!

    Read the article

  • Cannot copy files from external hard drive to desktop hard drive in Window 7

    - by Mohammad Reza Selim
    I'm trying to copy some old files from one of my external hard-drives to the hard drive of my desktop PC. Some files can not be copied but giving the error like 'Cannot read from source file or disk'. Those files are videos files (.DAT, .VOB, .MPG) and I watched them all the way through with no issues so the files aren't corrupted. I'm running Windows 7, with admin permissions. Could any one let me know the reason and a solution?

    Read the article

  • SSD with multiple partitions - disk life implications

    - by Nicolas Webb
    Each block on a SSD has a finite number of writes. This is mitigated on modern drives by "spreading" the writes around as you use the drive. I'm wondering if you partition a SSD into several partitions (a Mac using Boot Camp, for example) if this measure is defeated somewhat - can the writes be spread across the entire drive? Or are they contained strictly within the partition boundaries? Any SSD controller engineers here :)?

    Read the article

  • System Reserved Partition has Drive Letter After Applying a WIM Image with ImageX

    - by user1291332
    I have installed Windows Vista on a computer using ImageX from WinPE. I followed the instructions here for partitioning the hard drive, creating a 300 MB system partition and using the rest of the drive for a Windows partition. The install has worked perfectly apart from the fact that the system partition has been assigned the drive letter C: and the Windows has been assigned the drive letter D:. I would like the system drive to have no letter and the Windows partition to have the drive letter C:. I think I have managed to figure out why it is doing this. See my answer below. Can anyone confirm this?

    Read the article

  • mac external-hard-disk "software update"

    - by Pietro
    When I make a software update, the files are downloaded on my MacBook's internal hard disk. How can I set a different hard disk as default? I suppose the files related to the software update are compressed packages that have to be saved, opened and decompressed. I would like to use the internal HD just to update MacOS, without storing any temporary files. Thank you! Pietro MacBook Pro 2009, 256 GB SSD, MacOSX 10.6.4

    Read the article

  • Recovering drive via boot to Win7 setup command prompt

    - by Valamas
    I am trying to recover data from two old IDE drives. Drive1 has been successful, but something is wrong with Drive2. It does not appear as a drive letter. Due to limited legacy hardware, the only way i can see these drives is to boot using windows 7 setup and goto the command prompt. Without going further as to why, my question is how i can access the data in this command prompt. I discovered DISKPART command and while a first time user, it looked like something that can fix my problem. Here are the results of my diskpart commands. At the bottom is a image of the commands taken with a camera. The Drive2 is present because when using the diskpart command, I can see it. How can I copy the information using a robocopy script if the drive letter is not available? how can I assign a drive letter? Is there any repair command I need to execute? When i execute DISKPART, the following is what i see. DISKPART> LIST DISK Disk### Status Size Free Disk 5 Online 37 GB 2048 KB So then I select disk 5. DISKPART> SELECT DISK 5 "Disk 5 is now the selected disk" When I list partition DISKPART> LIST PARTITION Partition ### Type Size Partition 1 Primary 101 MB Partition 2 Primary 37 GB So I select partition 2 "Partition 2 is now the selected partition." I then try to assign a drive letter DISKPART> ASSIGN LETTER=G "There is no volume specified." "Please select a volume and try again." When i list volume the drive is not present. DISKPART> LIST VOLUME Result of the above commands

    Read the article

  • External USB disk drive cannot be remounted in Windows XP

    - by jackhab
    I have Maxtor Basics Desktop 1TB external USB drive connected to Windows XP. The dirve's firmware puts it to sleep after 10-20 min of inactivity and then the drive cannot be mounted unless I reset it via power connector. While in sleep mode I can see the device in the Device Manager under both Disk drives and USB sections. Is there a way to get the drive out of sleep mode without hard reset? Thanks

    Read the article

  • Safely remove external USB drive fails due to $extend

    - by moontear
    When connecting an external USB 3.0 hard drive to my USB 3.0 ports I can never safely remove it. Somehow windows always keeps the journal files open: "Always" as in this time I only connected the drive, copied a 10GB VM and wanted to disconnect it afterwards (like 15 minutes after copying, so all copying was done). As you can see there is no other program keeping a handle on the disk besides System. I tried restarting explorer.exe as well as RemoveDrive.exe from Uwe Sieber. No luck, the locks on the hard drive always remain. My only solution is just unplugging it (whereas I'm afraid of damaging the data?) or restarting the computer (always helps, doesn't it?). Might it have something to do with me only having a SSD hard drive and the external disk is a regular drive? Might it have something to do with the USB 3.0 drivers (NEC Electronics USB Hub)? I never have this problem when using the regular USB 2.0 ports. Any ideas on how to properly unmount the disk?

    Read the article

  • Grounded outlet on external hard drive.

    - by goathens
    Is there any value in getting an external hard drive with a grounded power supply? Would grounding the drive protect it from a static jolt from my hand when I pick it up? I've only really ever used the huge 5.25" external housings (they usually have an integrated power supply and use the standard heavy PSU cable with ground), and I need some more but noticed while shopping that the current trend is towards smaller enclosures with the external brick (and hardly ever grounded).

    Read the article

  • Sudden increase in avalable hard drive space

    - by Faken
    I was copying large files over to my computer for video editing and keeping an eye on available hard drive space I knew I should have had just enough space to put everything. However, as I was getting close to filling up my hard drive, the available free space suddenly jumped by about 30GB. Any idea what happened?

    Read the article

  • Sata drive overiding IDE?

    - by Aznbinladen
    I recently just bought a Sata Hard drive and hooked it up and installed a OS. I am making it my Primary hard drive. What I had before that though was 2 IDE hard drives that I used. One of them was my Prime and the other one was just a second to keep stuff on. My problem is that now since I hooked up the Sata drive, my IDE drives are not being detected at all. I even tried to remove the Sata drive completely and use my IDE drives, but it couldn't be detected. What should I do? Am I connecting them wrong?

    Read the article

  • Problem with slow hard disk

    - by Makis Arvin
    We bought some new PCs in my company with the new iCore 7 and 8GB memory and the following hard disk: WESTERN DIGITAL WD8000AARS 800GB CAVIAR GREEN SATA2 The problem we have is that after installing windows XP64 SP2 the write speed of the hard disk is extremely low!. The windows system monitor shows that the Average Disk queue length is always at 100% and a winzip extract of 350mb takes about 8min. Is there any idea on where to start looking for the cause of that? Thanks

    Read the article

  • Hard Drive Bad Sector marking utility

    - by Kevin Boyd
    I already have Windows XP, During installing Ubuntu(dual boot) the disk drive just stuck up at one place and doesn't seem to move ahead.. Is there a disk bad sector mark utility that just marks these sectors so that the disk doesn't seek them later. I tried running Seagate Seatools on the drive but both the short test and long test fail even before they start even chkdsk /f/r doesn't seem to work as the system locks up at stage four.

    Read the article

  • Configuring Windows Server Backup Destination Drive Sets

    - by Nicholas
    Is it possible to set up the standard backup system in SBS 2011 (or Server 2008 R2) to use an internal drive as a destination as well as external drives? Before you say yes, from my tests and from what I've read on the web, backups with internal drives included as a destination always seems to prefer the internal drive over connected external ones. (Regardless of what drive might be marked as 'active'). So no data ever gets written to a plugged in external drive. In my opinion external drives should always have priority over internal drives or including them is pointless.

    Read the article

  • Data recovery on an Iomega portable drive.

    - by Kaji
    For Christmas, my little brother got an Iomega 500GB portable hard drive. It'd been working well, but last week it flat died, and the company's trying to shirk it, claiming it's not under warranty and saying it'll cost at least $900 to recover the data from the drive. He's still trying to fight the warranty thing, but wants to know, should it boil down to it, what other options exist for recovering the data from the drive. (in before "BACK UP!")

    Read the article

  • How can I detect hard drive failures?

    - by Francis
    I am in charge of a large number of Windows servers. Recently, many have been reporting hard drive errors with event codes 11 and 55. CHKDSK indicates that the drives are fine most of the time. What other diagnostic tools could I use to more accurately detect hard drive failures? Could these Windows events be false positives? I have already evaluated S.M.A.R.T., and it seems to have significant sensitivity and specificity issues.

    Read the article

  • Sudden increase in available hard drive space

    - by Faken
    I was copying large files over to my computer for video editing and keeping an eye on available hard drive space I knew I should have had just enough space to put everything. However, as I was getting close to filling up my hard drive, the available free space suddenly jumped by about 30GB. Any idea what happened?

    Read the article

  • What is the probable failure - no BSOD, no event log, monitors sleeping, force reboot required

    - by Tyler
    Every 3 to 15 days, my PC freezes. This typically happens when the computer is idle, I'm coming home from work, back from vacation, etc. It's never happened while using my computer. The monitors are in power save mode The Caps Lock light on the (wireless) keyboard doesn't work Ctrl-alt-del has no effect, mouse (wireless) has no effect The hardware reset button and single press of power putton have no effect Computer does not appear on the network No BSOD, no memory dump Event logs have no errors or indications of problems near the time of crash. Only messages after reboot indicating that there was a reboot without a clean shutdown. Windows is set to never put the computer to sleep (just the display) Here are the vital stats of the build: OS Windows 8 Pro 64-bit CPU Intel i5-2400 Mobo Intel BOXDP67DE Micro ATX GPU MSI N460GTX Cyclone768D5/OC RAM CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9 PSU SeaSonic X Series X650 Gold System Drive Samsung 840 Pro 256 GB SSD Data Drive 2 x Western Digital WD20EARS 2TB in hardware RAID 1 Optical Lite-On DVD burner IHAS424-98 And here is the story of how the problem developed and what I've done to diagnose: January 2011, system built with Windows 7 64-bit, runs great. March 2011, Intel replaced the mobo because of the bad sata controllers. October 2012, upgrade to Windows 8 (problems start shortly after). January 2013, system freezes and causes network to fail for the whole house. Unplug the network cable and other devices and PCs can use the internet. Plug it back in, internet goes away for everyone. Reboot and everything is fine. March 2013, install Intel Gigabit CT PCI-E NIC, disable mobo nic in bios. Network strangeness goes away. Freezes are less frequent. Memtest shows no problems (20 passes). Early June 2013, replace Antec PSU with SeaSonic PSU. Mid June 2013, replace OCZ Vertex 2 SSD with Samsung SSD. Late June 2013, get frustrated and hope the community has some good ideas (I'm running out of budget to replace parts). My next plan of attack is setting "Turn off display" to Never and using a screen saver to see how that reacts on the next freeze. It makes me sad to waste power for up to 15 days though. Has anyone out there seen a problem like this? Any ideas on what kind of malfunction would act this way? Ideas of other diagnostic steps to take?

    Read the article

  • View real time hard drive transfer rates for Mac

    - by zm15
    I am looking for a program/app that will show me the current data rate that is being written and/or read from the hard drive in real time, for the Mac. I want to see the rate at which the hard drive is reading/writing when I'm rendering video files in After Effects and Final Cut. Is there a program to do such a task??

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >