Search Results

Search found 12013 results on 481 pages for 'dvd drive'.

Page 180/481 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

• Is RAID 0 or JBOD better for home media server?

  - by Donald Hughes

  I have an external two-bay drive enclosure (the OWC Mercury Elite-AL Pro) connected to a Mac Mini (my home media server) over FireWire 800. I'm streaming media to other computers in the house over wired gigabit. I have two 1.5 TB drives that I'm using independently right now. The media is on one, and I'm mirroring the files to the other drive at night as a backup. But as I approach filling up the drive I'm wanting to span those two drives together to give me a total of about 3 TB, and then buy another drive for backups. The external enclosure supports both RAID 0 and JBOD, but I'm not clear on which would be better in this situation. Would RAID 0 provide any performance improvements over JBOD for streaming video (possibly several streams at once? How does each affect the MTBF of the drives? In general, should I choose RAID 0, JBOD, or keep them independent?

  Read the article

• Can't Install Windows 2008 R2 on Lenovo Laptop With SSD

  - by Ben

  I am trying to install Windows Server 2008 R2 on a new Lenovo X201 or T410 laptop. Setup halts with the following pop-up: A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the windows installation media is in the CD/DVD drive you can safely remove it for this step. The CD drive is obviously working, as it's booting from CD to get to this point. The only thing I can think is that it is to do with the fact they have SSD disks in - but that's just a guess. (Edit - One extra thing that may or may not be relevant: it's the 64 bit version of Server 2008 R2)

  Read the article

• OCZ Vertex 2 not recognized by Ubuntu installer

  - by Zsub

  As I boot into the Ubuntu 10.10 (or 11.04, doesn't matter) live environment or installer, it just refuses to recognise my Vertex 2. It reports the disk as ATA and not supporting smart, shows no serial number, and doesn't list the size correctly. All fdisk tells me is Unable to read /dev/sda (it's the only storage in the PC). I'm now running a temporary install of Windows 7 off of it, which worked like a charm, so where am I going wrong with Ubuntu... Specs: Asus M4N68T-M LE V2 (BIOS 0702, most recent) OCZ Vertex 2 SSD 60 GB Amd Athlon II X4 640 Patriot PSD34G13332 4GB DDR3 ram (two banks) EDIT I installed a second drive, installed Ubuntu on that and booted, it recognised the SSD just fine. I'm now trying to apt-get upgrade the live-environment. I wonder if there is any way to sort of install Ubuntu from Ubuntu (I boot into the working install on the other drive, install it on the SSD and then boot from the SSD). EDIT2 Ok, so that doesn't work. The install detects the SSD, however, it cannot format it. EDIT3 After a fresh boot I can read out SMART-data and even perform a read-benchmark, but if I try to format it, or do a write-bench, it'll crap out and after that it says SMART is not supported. So basically it seems I can't write to the disk, as it will stop working when I do, I will try to run repeated read-benchmarks to see if that has any effect. EDIT4 I'm running several read benchmarks on the drive right now, they give results that are to be expected from an SSD. If the read-benches don't fail, I can use fdisk on the disk, but it is now stuck trying to re-read the partition table after issueing the 'w' command. EDIT5 Parted Magic did recognize the drive and with hdparm -I even could tell me the drive was in a frozen state. I powercycled it (just pull out the plug from the SSD and plug it back in) and it wasn't frozen anymore. After that I could upgrade the firmware on the drive (still using Parted Magic) and format it to Ext4. After I rebooted into the Ubuntu installer, it wouldn't get recognized and hdparm didn't want to talk to it saying HDIO_DRIVE_CMD(identify) failed: Invalid exchange. EDIT6 For some reason if I enable one of the RAID controllers (the one the SSD is connected to, obviously) Ubuntu will let me format it, mount it and write to it. The installer also recognizes it. However if the raid controller is enabled but no array is defined the motherboard can't boot from it :(

  Read the article

• Flash was "not designed to function across LANs". Any workarounds?

  - by Triynko

  See: http://helpx.adobe.com/flash/kb/problems-using-flash-authoring-across.html Issue When using Adobe Flash across a local area network (LAN) and networked drives/folders, you may experience any of the following problems:" Flash crashes while performing a test movie on FLA files located on a networked drive or folder. FLA files get corrupted when opening from or saving to networked drives or folder. Flash does not reflect changes in custom class after compiling. Flash, Flash Video Encoder, or Adobe Media Encodercrashes or corrupts Flash Video (FLV) files while encoding source located on networked drives or folder. Flash Video Encoder or Adobe Media Encoder crashes or corrupts FLV files where the output folder is a networked drive or folder. Published Flash Player (SWF) files and projectors are unable to load content located on networked drives or folder. More than one instance of a SWF or Projector on client machines cannot play back FLV files located on a networked drive or folder. Reason The Adobe Flash IDE, FLV Encoder, Adobe Media Encoderand Flash Player were not designed to function across LANs. Solution Use of Flash files across local networks is not supported in any context. Published content should access data through a web server. All file sources should be opened and saved on the local system. Using Flash in such a scenario for project collaboration or content deployment is highly discouraged and may corrupt your source files. If you need to work in a collaborative environment or store source files on a server, use the project panel and/or a third-party version control system. SERIOUSLY? I cannot work on files located on a mapped network drive? How did they mess that one up? Does the Flash IDE really open the source file and wipe it clean to do the saving, rather than saving a copy first then replacing it as an atomic file system operation? How hard would it be for them make a dummy temporary file for saving then issue a MOVE command? Any workarounds for this, like something that can make a network drive as stable as a local drive, like some kind of automatic local caching and synching?

  Read the article

• Does Hyper-V support SCSI Pass-through discs in a Server 2003 R2 VM?

  - by Peter Bernier

  I'm running into some difficulties getting pass-through disks to be accessible to a Hyper-v server 2003 r2 virtual machine. Host OS : Server 2008 R2 full w/Hyper-V role Guest OS : Server 2003 R2 (Windows Home Server) The guest's OS disk is a pass-through disk on the IDE controller (not the best solution, but I can live with it). My storage disks will be pass-through disks on the SCSI controller. I'm able to see all of the disks that I'll be using for the VM on the host without issue. The problem that I'm having is that I can't seem to get the guest OS to be able to 'see' the storage drives (as pass-through disks on the SCSI controller). Here's what I'm doing : On the host, the storage drive is set to 'Offline' just like the OS disk (this is required for pass-through to work). In the VM, the storage drive is on the SCSI controller. Hyper-V Integration Tools are installed in guest. That's as far as I'm able to get. I don't see the drive in Computer Management, or in Windows Explorer (I've tried with an unformatted disk, as well as after formatting a partition). I am able to see a removable device that lists the disk's model number in the Guest, but I can't seem to access the storage. (I get an entry in Device Manager that needs drivers, but nothing on the Integration Tools disc works..) Trouble-shooting steps I've tried : If put the pass-through drive on the IDE controller, I can see it in the Guest. If put the storage drive 'Online' in the host and create a VHD on it on the SCSI controller, I can see it in the Guest. I suppose I could create a fixed-size VHD that consumes the entire disk, but I'd rather not have that overhead. I've also extracted the contents of the Integration Tools drivers (x86 and amd64) and tried pointing the disk controller to each of those, with no luck. Can anyone offer suggestions as to how I can get this to work properly?

  Read the article

• Is a "failed" RAID 5 disk really no good?

  - by GregH

  This is my first venture in to setting up RAID on my home system. After installing 3 x 1TB drives in RAID 5, everything was running well for about 10 days. Then, the Intel Rapid Storage Technology software that monitors the disks and RAID on my system, told me that I had a failed drive. I marked the drive as good, and the array rebuilt. Then a day or so later I got a notification again, that the drive failed. I'm just wondering if this drive really is no good or if there is something I can do to get it working again? Or, do I just need to return it to the store where I bought it and get a replacement?

  Read the article

• Disk Redundancy across different server

  - by Mascarpone

  I have 3 servers, all with the same specs: Intel CPU 8 GB RAM Linux or BSD Single 2TB desktop SATA with more than 10K Hours of operation, with only less than 300 GB Used My provider cannot install a second hard drive, but can guarantee me that the drive will be replaced immediately in case of failure, with another equally crappy drive. The likelihood of drive failure is high, and since I can't use RAID, I was thinking about keeping a back up of each machine on all the other machines, so that there are always 2 copies on 2 different drives, plus the original. I would synchronize the drives every hour, with rsync, to guarantee some sort of redundancy, since bandwidth inside the DC is free, so it would be much cheaper than offsite backup. (A daily offiste backup is kept anyhow). What do you think? Any suggestion?

  Read the article

• Does the Windows "Sources" folder need copied to C: like the "i386" folder did?

  - by James Watt

  On all flavors of Windows prior to Windows Vista, the Windows install CD contained a folder called i386. After installing Windows, this folder is suppose to be copied to the C: drive. Once the folder has been copied, if user is ever installing a program or windows updates that require the Windows install CD, it will retrieve the files from the hard drive INSTEAD of prompting for the Windows CD. On new versions of Windows, including Windows Vista, Windows 7, Server 2008 and Server 2008 R2, the i386 folder has been renamed to "sources". Should this folder be copied to the hard drive? Or do the new versions of Windows work differently (i.e. by installing all features on the hard drive to eliminate the need for ever prompting the user to insert their disc.) It does not hurt to copy the sources folder, so I have been doing it. But if I could eliminate time wasted it would make installations faster which helps my customers' bottom line.

  Read the article

• How to disable auto insert notification in Windows 7?

  - by White Phoenix

  Alright, here's the problem. My hard drive activity light on my custom built PC is blinking exactly once every second. Microsoft has this to say on the issue: http://support.microsoft.com/kb/138598 There has been discussion on this issue several months ago: Why does my hard drive LED light blink every second? The problem seems to stem from primarily Windows 7 polling the CD-ROM/DVD drive every second to see if something is inserted. The Windows 7 users in the thread that was linked in the superuser question, https://social.technet.microsoft.com/Forums/fi-FI/w7itprohardware/thread/4f6f63b3-4b58-4154-9298-1566100f9d00, have confirmed that this IS a known issue with Windows 7. Some people point at the motherboard circuitry causing the CD-ROM and SATA activity to both be linked to that hard drive activity, but whatever the case, the temporary solution seems to be to disable the CD/DVD-ROM drive in Device Manager. In fact, disabling the CD/DVD-ROM does stop the blinking, but of course this solution is counterproductive, because I shouldn't have to entirely disable a device to fix this problem. I've done the following suggestions in that thread: Change the autorun registry entry to 0 Completely disable autoplay in the autoplay control panel Disable autoplay in the Local Group Policy Editor. None of these stop the blinking from happening - apparently these solutions work for both XP and Vista, but it seems to be different in Windows 7. So I'm wondering if anyone has found out how to completely disable the polling in Windows 7, or if this will just have to be an issue we will have to deal with. There's no option to disable the auto insert notification when you go to the device within device manager (there was in XP), so I got no idea where this option is hidden, or if there's a registry key entry I could change to stop the polling. Anyone have any idea?

  Read the article

• HP Recovery Manager failed creating a backup disc

  - by Baehr

  I had to restore my computer (running Windows 7) back to its factory default, so I ran the HP recovery manager disc and chose to reformat my computer. Before doing this I was given an option to backup my current files to a DVD, and I did so; getting the confirmation of a successful DVD burn. Booting up my computer everything looks like it did when I first purchased it (like expected). But when I pop in the backup DVD and run the recovery EXE inside it, the application creates a directory inside C:\System Recovery Files which contains the empty directories: [(^_^)] and Program Data. So essentially what I'm getting out of this is a failure in creating a back-up. Which is not only confusing but incredibly frusterating. Is there any way that I can recover the files lost in the

  Read the article

• RAID1 Hard drives with Intel Controller

  - by Dave_H

  I have an older server with 2 35GB hard drives arranged as a RAID-1 drive. I have 3 open bays, I'd like to add 2 more hard drives to the open bays and have all 4 drives configured as a RAID-1 drive that Windows sees as 1 larger drive. Is this possible? If not, the new drives are 2x as big as the old drives, is it possible to replace 1 of the old drives and rebuild then replace the second drive and rebuild and somehow expand the array to use all of the available space? The server is using an Intel hardware raid controller, the software interface is Intel Storage Console v2.12.

  Read the article

• Should I use SSD Caching on non bootable HD?

  - by Onema

  I have an asus 9p79x pro which allows me to do SSD Caching. I have a 256 GB SSD drive that I use an my primary boot drive, and I have a 1 TB disk where I put most of my games, music, videos, dowloads, pictures, etc. I also have an extra 64 GB SSD Drive that I'm currently not using. I thought it would be a good idea to use it as my 1 TB disk cache and improve the load time of games and programs that are installed on the 1 TB disk; but will this work correctly? It seems from all that I have read online about this board that it is used to cache a boot drive. Any thoughts? Thank you

  Read the article

• Switch Windows 8 from a hybrid MBR/GPT => GPT only on Macbook Pro Retina

  - by Sid

  I used DiskUtility+Bootcamp Wizard to setup my hard drive for Windows 8 (final MSDN). Somewhere in that process, the Apple tools turned my GPT disk into a hybrid MBR/GPT. All my 4 primary MBR partitions are used up, so when I try turning on Bitlocker in Windows 8, it complains about not finding a System drive. I know on Windows 8 the Bitlocker setup tries to create the 200(?)MB system partition if it's missing. However with all 4 partitions filled I suspect it can't create system drive = it can't find it = throws back an error like "BitLocker Setup could not find a target system drive. You may need to manually prepare your drive for BitLocker". I've already tried disabling hibernation, swap file etc. Now I'm thinking that if I were to get rid of the MBR scheme altogether, perhaps I can be alright within the GPT world without MBR's 4 primary partitions limit. So, how can I get rid of the MBR tables on the hybrid scheme in a manner that still leaves Mac OS and Windows 8 in working conditions? Details: Hardware is the MacbookPro Retina. Primary MBR partitions are consumed as follows: EFI partition HFS+ partition (=encrypted, therefore ="Apple_CoreStorage") HFS+ partition (Recovery partition, contains unencrypted Mac bootloader) NTFS partition (Windows8 all-in-one partition) diskutil list output sid-mbpr:~ sid$ diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *251.0 GB disk0 1: EFI 209.7 MB disk0s1 2: Apple_CoreStorage 160.0 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 4: Microsoft Basic Data Win8 90.1 GB disk0s4 GPT vs MBR addresses sid-mbpr:~ sid$ sudo gptsync /dev/rdisk0 Password: Current GPT partition table: # Start LBA End LBA Type 1 40 409639 EFI System (FAT) 2 409640 312909639 Unknown 3 312909640 314179175 Mac OS X Boot 4 314179584 490233855 Basic Data Current MBR partition table: # A Start LBA End LBA Type 1 1 409639 ee EFI Protective 2 409640 312909639 ac Apple RAID 3 312909640 314179175 ab Mac OS X Boot 4 * 314179584 490233855 07 NTFS/HPFS Status: GPT partition of type 'Unknown' found, will not touch this disk.** **: Ignore this message, the gptsync tool is old and doesn't understand the UUID for "Apple_CoreStorage" / FileVault2 partitions. Since LBA addresses are alright, safe to ignore this message.

  Read the article

• Can't Install Windows 2008 R2 on Lenovo Laptop With SSD

  - by Ben

  I am trying to install Windows Server 2008 R2 on a new Lenovo X201 or T410 laptop. Setup halts with the following pop-up: A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the windows installation media is in the CD/DVD drive you can safely remove it for this step. The CD drive is obviously working, as it's booting from CD to get to this point. The only thing I can think is that it is to do with the fact they have SSD disks in - but that's just a guess.

  Read the article

• Does a 3ware "ECC-ERROR" matter on a JBOD when I have ZFS?

  - by Stefan Lasiewski

  I have a FreeBSD 8.x machine running ZFS and with a 3ware 9690SA controller. The 3ware controller shows an ECC-ERROR with one of the disks: //host> /c0 show VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 279.39 GB SAS 0 - SEAGATE ST3300657SS p1 OK u0 279.39 GB SAS 1 - SEAGATE ST3300657SS p2 OK u1 931.51 GB SAS 2 - SEAGATE ST31000640SS p3 ECC-ERROR u2 931.51 GB SAS 3 - SEAGATE ST31000640SS p4 OK u3 931.51 GB SAS 4 - SEAGATE ST31000640SS /c0 show events shows no ECC errors in it's recent history. ZFS does not currently detect any errors. zpool status says No known data errors My question: Is this ECC-ERROR something that I need to be concerned about? According to the 3ware CLI 9.5.2 Manual, an ECC-ERROR means that the 3ware controller caught a read-error for one or more sectors on this drive. This sometimes occurs when a RAID array is recovering from a failed disk. I believe that ECC-ERRORS can also be detected when the 3ware Controller verifies each disk. None of the drives have failed and thus there was no drive rebuild, so I assume that 3ware discovered a bad sector when it ran it's weekly auto-verify scan of the disks. Is this a safe assumption? According to our logs, ZFS has not detected any bad sectors on this drive. ZFS can work around read errors -- if ZFS detects a bad sector on the drive, it will simply mark that sector as bad and never use it again. From the ZFS perspective one bad sector isn't a big deal, although it might indicate that the drive is starting to go bad.

  Read the article

• Raid HDD Boot up

  - by user234695

  My server is Power Edge 1950 running server 2008 32Bit, using 3 Physical SAS HDD as a Virtual 2 Disk configured for RAID5, with partition of C drive as OS and D drive as Data. Planning to format and install Server 2008 R2 64Bit so I insert a New Physical disk and configured as RAID5 and clone the C drive and D drive to the new hard disk. Now I need to test that the new hard disk is able to boot windows and work as expected. How do I test, I am not able to boot the windows by choosing the new harddisk, the bios show only the existing HDD, not the new one. Also, if I remove the old three hard disk, and leave the new harddisk and then am I able to boot the device, if I do this does my existing RAID5 configuration and data on the hard disk still remain.

  Read the article

• How to set up RAID 1 on Dell PERC S300 With Existing OS Install

  - by Daniel Dugger

  We have a server that is being used in production, but it was not originally meant to. The main thing I want to add to it is a Dell PERC S300 RAID Card to have the main hard drive (Windows Server 2008 R2) mirrored on another hard drive. I can not initialize the disk and wipe the the OS to create the array and then re-install. Is there a way to create the array with a current hard drive, without affecting it, and just mirroring the drive? If that card is not an option, is there a card that would allow that? The server is a Dell PowerEdge T110 II.

  Read the article

• Are Motherboards for the Acer Aspire One AOA150 Netbook Compatible with the AOA110?

  - by Mindstormscreator

  I have an Acer Aspire One ZG5 AOA110-1588 netbook, and the motherboard doesn't have a port for a SATA 2.5 inch hard drive; it only supports this slow 8GB SSD type drive. Through research I've discovered that the AOA150 motherboards do have a SATA slot, and the bottom plate of these laptops have an appropriate protrusion for the drive to fit in (for example, compare this to this). The AOA110 and AOA150 models are very similar in appearance and specs. I've even seen tutorials that involve soldering a SATA connector onto the AOA110's motherboard, essentially creating an AOA150 motherboard (right?) So, could I just swap out the motherboard in my netbook with the MBS0506001? (I'd post another link to the actual board but can't because of the spam prevention...) I assume I would also need to purchase and replace the bottom cover with a larger one and possibly get a hard drive caddy as well...? Thanks!

  Read the article

• WinXP: File Record Segment nnnn is unreadable?

  - by chris

  I'm pretty sure that the drive is toast, except for the fact that this error is only showing up on one partition (it's out of a Dell computer, and has a couple of Dell partitions, which boot and work fine.) I've already purchased another hard drive, and re-installed WinXP, but when I re-connect this drive and reboot, I'm getting thousands of these errors. Is there any chance of recovering any files off this? Should I prevent XP from trying to resolve the problems?

  Read the article

• Moving my bcd from HDD to SSD - Windows 7

  - by lelouch

  I have windows 7 installed on my SSD, but the /boot/ and bootmgr are on my hard-drive. I want to move them to my SSD for faster booting times. So i figured that I can fix the problem using the Windows startup repair tool. I made a bootable windows 7 flash drive, and ran Windows startup repair. However, it exits with an error. I also can't see my OS in the list of installed OSs. I then tried fixing via the command prompt with bootrec /fixmbr, bootrec /fixboot, bootrec /rebuildbcd. Bootrec /rebuildbcd finds the OS, but gives me the error "The requested system device cannot be found" when i try fixing it. Does anyone know why this is failing? I read somewhere that the Windows Repair environment doesn't support a flash drive, which is why I'm getting that error. Is this true? Unforunately my dvd drive is playing up so I can't use it to test this.

  Read the article

• How to reference other locations in making multi-boot live cd

  - by Nrew

  There is a tool in pen drive linux that allows you to boot directly with multiple iso files. And here is a sample in the menu.lst which allows you to choose which iso file you want to boot. title Fedora 13 find --set-root /Fedora-12-i686-L.iso map /ubuntu-10.04-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/ubuntu-10.04-desktop-i386.iso splash initrd /casper/initrd.lz I'm just using it on my 8gb flash drive and the location of the iso file is in the flash drive itself. Is it possible to reference other locations. So that I could boot from it, without limitations. because the flash drive can only contain 8gb of data. Is it possible? Anyone here tried this before?

  Read the article

• Digital audio input on Macbook?

  - by Ken

  I have: a Macbook (not Pro), don't know the exact model but it's a Core 2 Duo 2.0GHz and probably what Wikipedia calls the "Late 2006" or "Mid 2007" model a DVD player, region-free, that has "Coax and TosLink optical digital audio outputs" I want to make an MP3 of the audio track of some DVDs (for learning a new language), and I can't use the Macbook's built-in DVD drive because it's a different region (ugh!). I'm sure I can connect the DVD player to the Macbook with an analog audio cable. However, if it's possible I'd prefer to keep the signal digital. I'm not even positive if my old Macbook has digital audio in, and if so what I need to connect to it. (I've done plenty of home audio geeking, but always in analog!) Will a "Toslink cable" plus a "Toslink Female to Mini-Plug Male Adapter" (found on Amazon) let me connect my things together? It looks like the pieces will fit but I'd like to hear someone confidently knowledgeable on the matter before I buy something. Thanks!

  Read the article

• I have recovery issues in my Gateway nv series laptop

  - by kshitij

  Helo i wanted to restore os from my recovery drive. but because of some issues i could not do that. so i had my recovery dvds which i made when i bought laptop. these are three dvds. so i inserted one dvd and installation started. and it asked for second dvd and i inserted but it is not taking it. once i did installtion with this three dvds but now it is not taking second dvd. So because of this type of failure i install trial version of windows 7 and take my backup. after it i install Gateway recovery Management. and it is not working. when i am repair my computer it is not showing that Image of recovery partition. Please I need Help.

  Read the article

• Windows 7 CRC Error When Installing Fallout 3 [closed]

  - by c00lryguy

  Earlier today, I installed Fallout 3 on Windows XP perfectly fine. Then about 2 hours ago I installed Windows 7 and I would like to install Fallout 3. But, when I try to install Fallout 3 on Win 7, I get an error while in the middle of the install: CRC Error: The File C:\Program Files\Bethesda Softworks\Fallout 3\Data\Video\B03.bik doesn't match the file in the setup's.cab file I forget the filename but it is the same each time I install. The disk literally went from the DVD-Rom to the case after the first install and straight from the case to the DVD-Rom. It's in perfect condition. My DVD-Rom is only about 2 months old and I've never had any problems with it. I don't understand what's going on. My user that I'm installing the game with is set as Administrator, as well.

  Read the article

• Is it possible to check if a BIOS supports password entry for a self-encrypting SSD/harddrive?

  - by therobyouknow

  I'm considering purchasing a SSD that has built-in hardware encryption / self-encrypting drive that provides its own full drive encryption. What can I do to check that the BIOS on my machine will support it? Background research so far Research on self-encrypting drives - good article below, but I would need to know if the BIOS can support it: http://www.computerweekly.com/feature/Self-encrypting-drives-SED-the-best-kept-secret-in-hard-drive-encryption-security

  Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >