Search Results

Search found 5277 results on 212 pages for 'fuzzy logic'.

Page 180/212 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

• PHP include taking too long

  - by wxiiir

  I have a php file with around 100mb which is full of arrays (only arrays). I've made a script that includes this file (for processing), first it exhausted the default Xampp 128mb memory limit, i've raised it to 1024mb but it just takes forever and doesn't do anything. I'm sure the problem is being created by the sheer size of the file because i've tried removing all lines of code and just leaving the include and an echo for me to know when it finishes executing, and it does the same thing (which is taking forever), i've also tried to run the 100mb file in separate and same thing again. A 10mb file is taking forever as well but a similar 1mb file is almost instantly read and executed so the problem must be more than just the file size. I was avoiding using c++ for a simple project as this and would rather not to as php is easier for me and the task that will be executed doesn't need to benefit from the added speed that it would have if it had been done in c++ but if i have no luck in solving this problem i guess i'll have to. EDIT Reasons for not using a database: 1-Whoever made it didn't used a database and it will be pretty hard to store this in an organized database if i'm not able to do something with it first, like just reading it, copying parts from it or putting in memory or something. 2-I don't have experience working with databases as pretty much all stuff i've ever done in php didn't needed large amounts of stored data, 50kb at best, if i was thinking about a big project or huge chunks of data as this one, i definitely would, but i didn't made this mess to start with and now i have to undo it. 3-The logic for having to store a small portion of data like 10mb in hard drive when now every computer has pretty much enough ram to fit the whole OS in it is pretty much incomprehensible unless someone gives a good explanation about it, if i had to access a lot of said files simultaneously i would understand but like i said, this is a simple project, this is the only file that will be accessed at a given time this isn't even to make some kind of website, it's to run a few times and be done with it.

  Read the article

• Dynamic programming Approach- Knapsack Puzzle

  - by idalsin

  I'm trying to solve the Knapsack problem with the dynamical programming(DP) approach, with Python 3.x. My TA pointed us towards this code for a head start. I've tried to implement it, as below: def take_input(infile): f_open = open(infile, 'r') lines = [] for line in f_open: lines.append(line.strip()) f_open.close() return lines def create_list(jewel_lines): #turns the jewels into a list of lists jewels_list = [] for x in jewel_lines: weight = x.split()[0] value = x.split()[1] jewels_list.append((int(value), int(weight))) jewels_list = sorted(jewels_list, key = lambda x : (-x[0], x[1])) return jewels_list def dynamic_grab(items, max_weight): table = [[0 for weight in range(max_weight+1)] for j in range(len(items)+1)] for j in range(1,len(items)+1): val= items[j-1][0] wt= items[j-1][1] for weight in range(1, max_weight+1): if wt > weight: table[j][weight] = table[j-1][weight] else: table[j][weight] = max(table[j-1][weight],table[j-1][weight-wt] + val) result = [] weight = max_weight for j in range(len(items),0,-1): was_added = table[j][weight] != table[j-1][weight] if was_added: val = items[j-1][0] wt = items[j-1][1] result.append(items[j-1]) weight -= wt return result def totalvalue(comb): #total of a combo of items totwt = totval = 0 for val, wt in comb: totwt += wt totval += val return (totval, -totwt) if totwt <= max_weight else (0,0) #required setup of variables infile = "JT_test1.txt" given_input = take_input(infile) max_weight = int(given_input[0]) given_input.pop(0) jewels_list = create_list(given_input) #test lines print(jewels_list) print(greedy_grab(jewels_list, max_weight)) bagged = dynamic_grab(jewels_list, max_weight) print(totalvalue(bagged)) The sample case is below. It is in the format line[0] = bag_max, line[1:] is in form(weight, value): 575 125 3000 50 100 500 6000 25 30 I'm confused as to the logic of this code in that it returns me a tuple and I'm not sure what the output tuple represents. I've been looking at this for a while and just don't understand what the code is pointing me at. Any help would be appreciated.

  Read the article

• Implementing IEnumeralbe on Non-Listed Items

  - by Stacey

  I have a class that contains a static number of objects. This class needs to be frequently 'compared' to other classes that will be simple List objects. public partial class Sheet { public Item X{ get; set; } public Item Y{ get; set; } public Item Z{ get; set; } } the items are obviously not going to be "X" "Y" "Z", those are just generic names for example. The problem is that due to the nature of what needs to be done, a List won't work; even though everything in here is going to be of type Item. It is like a checklist of very specific things that has to be tested against in both code and runtime. This works all fine and well; it isn't my issue. My issue is iterating it. For instance I want to do the following... List<Item> UncheckedItems = // Repository Logic Here. UncheckedItems contains all available items; and the CheckedItems is the Sheet class instance. CheckedItems will contain items that were moved from Unchecked to Checked; however due to the nature of the storage system, items moved to Checked CANNOT be REMOVED from Unchecked. I simply want to iterate through "Checked" and remove anything from the list in Unchecked that is already in "Checked". So naturally, that would go like this with a normal list. foreach(Item item in Unchecked) { if( Checked.Contains(item) ) Unchecked.Remove( item ); } But since "Sheet" is not a 'List', I cannot do that. So I wanted to implement IEnumerable so that I could. Any suggestions? I've never implemented IEnumerable directly before and I'm pretty confused as to where to begin.

  Read the article

• Automating Excel through the PIA makes VBA go squiffy.

  - by Jon Artus

  I have absolutely no idea how to start diagnosing this, and just wondered if anyone had any suggestions. I'm generating an Excel spreadsheet by calling some Macros from a C# application, and during the generation process it somehow breaks. I've got a VBA class containing all of my logging/error-handling logic, which I instantiate using a singleton-esque accessor, shown here: Private mcAppFramework As csys_ApplicationFramework Public Function AppFramework() As csys_ApplicationFramework If mcAppFramework Is Nothing Then Set mcAppFramework = New csys_ApplicationFramework Call mcAppFramework.bInitialise End If Set AppFramework = mcAppFramework End Function The above code works fine before I've generated the spreadsheet, but afterwards fails. The problem seems to be the following line; Set mcAppFramework = New csys_ApplicationFramework which I've never seen fail before. If I add a watch to the variable being assigned here, the type shows as csys_ApplicationFramework/wksFoo, where wksFoo is a random worksheet in the same workbook. What seems to be happening is that while the variable is of the right type, rather than filling that slot with a new instance of my framework class, it's making it point to an existing worksheet instead, the equivalent of Set mcAppFramework = wksFoo which is a compiler error, as one might expect. Even more bizarrely, if I put a breakpoint on the offending line, edit the line, and then resume execution, it works. For example, I delete the word 'New' move off the line, move back, re-type 'New' and resume execution. This somehow 'fixes' the workbook and it works happily ever after, with the type of the variable in my watch window showing as csys_ApplicationFramework/csys_ApplicationFramework as I'd expect. This implies that manipulating the workbook through the PIA is somehow breaking it temporarily. All I'm doing in the PIA is opening the workbook, calling several macros using Excel.Application.Run(), and saving it again. I can post a few more details if anyone thinks that it's relevant. I don't know how VBA creates objects behind the scenes or how to debug this. I also don't know how the way the code executes can change without the code itself changing. As previously mentioned, VBA has frankly gone a bit squiffy on me... Any thoughts?

  Read the article

• Still some questions about USB

  - by b-gen-jack-o-neill

  Hi, few days ago I asked here about implementing USB. Now, If I may, would like to ask few more questions, about thing I dind´t quite understood. So, first, If I am right, Windows has device driver for USB interface, for the physical device that sends and receives communication. But what this driver offers to system (user)? I mean, USB protocol is made so its devices are adressed. So you first adress device than send message to it. But how sophisticted is the device controller (HW) and its driver? Is it so sophisticated that it is a chip you just send device adress and data, and it writes the outcomming data out and incomming data to some internal register to be read, or thru DMA directly to memory? Or, how its drivers (SW) really work? Does its driver has some advanced functions like send _data to _device? Becouse I somewhat internally hope there is a way to directly send some data thru USB, maybe by calling USB drivers itself? Is there any good article, tutorial you know about to really explain how all this logic works? Thanks.

  Read the article

• Aggregate SQL column values by time period

  - by user305688

  I have some numerical data that comes in every 5 minutes (i.e. 288 values per day, and quite a few days worth of data). I need to write a query that can return the sums of all values for each day. So currently the table looks like this: 03/30/2010 00:01:00 -- 553 03/30/2010 00:06:00 -- 558 03/30/2010 00:11:00 -- 565 03/30/2010 00:16:00 -- 565 03/30/2010 00:21:00 -- 558 03/30/2010 00:26:00 -- 566 03/30/2010 00:31:00 -- 553 ... And this goes on for 'x' number of days, I'd like the query to return 'x' number of rows, each of which containing the sum of all the values on each day. Something like this: 03/30/2010 -- <sum> 03/31/2010 -- <sum> 04/01/2010 -- <sum> The query will go inside a Dundas webpart, so unfortunately I can't write custom user functions to assist it. All the logic needs to be in just the one big query. Any help would be appreciated, thanks. I'm trying to get it to work using GROUP BY and DATEPART at the moment, not sure if it's the right way to go about it.

  Read the article

• Help adding a backgroundView to UITableViewCell

  - by Alex

  I'm getting really desperate trying to add a UIImageView to UITableViewCell.backgroundView. All my efforts have resulted in this crappy rendering: It looks like the cell's label's white background is sitting on top of cell's background and covering portions of it. I tried setting the label's background color to clear, or some other color and it does not have any event. It is always white. The reason I know it's the text label's background causing this white area is that if I don't do [cell setText:@"Cell text here"]; the white area is gone and I see just the cell's background image. Here's the code that I'm using. The table view is added in the .xib file and UITableView is added to UIViewController: - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return 1; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return [myCollection.items count]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { NSUInteger rowIndex = indexPath.row; static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier] autorelease]; cell.backgroundView = [[UIImageView alloc] initWithImage:[UIImage imageNamed:@"darkCellBackground.png"]]; cell.selectedBackgroundView = [[UIImageView alloc] initWithImage:[UIImage imageNamed:@"darkCellBackground.png"]]; } [cell setText:@"Cell text here"]; return cell; } - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { // Navigation logic may go here. Create and push another view controller. // AnotherViewController *anotherViewController = [[AnotherViewController alloc] initWithNibName:@"AnotherView" bundle:nil]; // [self.navigationController pushViewController:anotherViewController]; // [anotherViewController release]; [tableView deselectRowAtIndexPath:indexPath animated:YES]; } - (BOOL)tableView:(UITableView *)tableView canEditRowAtIndexPath:(NSIndexPath *)indexPath { return NO; } I'm sure I'm doing something wrong but cant quite figure out what.

  Read the article

• How do I simplify my code?

  - by Mitchell Skurnik

  I just finished creating my first major application in C#/Silverlight. In the end the total line count came out to over 12,000 lines of code. Considering this was a rewrite of a php/javascript application I created 2 years that was over 28,000 lines I am actually quite proud of my accomplishment. After reading many questions and answers here on stackoverflow and other sites online, I followed many posters advice: I created classes, procedures, and such for things that I would have a year ago copied and pasted; I created logic charts to figure out complex functions; making sure there are no crazy hidden characters (used tabs instead of spaces); and a few others things; place comments where necessary (I have lots of comments). My application consists of 4 tiles laid out horizontally that have user controls loaded into each slice. You can have between one and four slices loaded at anytime. If you have once slice loaded, the slice takes up the entire artboard...if you have 2 loaded, each take up half, 3 a third, 4 a quarter. Each one of these slices represent (for the sake of this example) a light control. Each slice has 3 slider controls in it. Now when I coded the functionality of the sliders, I used a switch/case statement inside of a public function that would run the command on the specified slice/slider. The made for some duplicate code but I saw no way around it as each slice was named differently. So I would do slice1.my.commands(); slice2.my.commands(); etc. My question to you is how do I clean up my code even futher? (Sadly I cannot post any of my code). Is there any way to take this repetion out of my code?

  Read the article

• EF 4 Query - Issue with Multiple Parameters

  - by Brian

  Hello, A trick to avoiding filtering by nullable parameters in SQL was something like the following: select * from customers where (@CustomerName is null or CustomerName = @CustomerName) This worked well for me in LINQ to SQL: string customerName = "XYZ"; var results = (from c in ctx.Customers where (customerName == null || (customerName != null && c.CustomerName == customerName)) select c); But that above query, when in ADO.NET EF, doesn't work for me; it should filter by customer name because it exists, but it doesn't. Instead, it's querying all the customer records. Now, this is a simplified example, because I have many fields that I'm utilizing this kind of logic with. But it never actually filters, queries all the records, and causes a timeout exception. But the wierd thing is another query does something similarly, with no issues. Any ideas why? Seems like a bug to me, or is there a workaround for this? I've since switched to extension methods which works. Thanks.

  Read the article

• Nullable object must have a value. VB.NET

  - by Glenn05

  I need help. I'm having problem in my program. This is my code on my Business logic layer. Function Load_ItemDetails(ByVal ItemID As String) As Items Dim objItemEnt As New tblitem Dim objitem As New Items Try Using da = New DataAccess objItemEnt = da.Load_ItemDetails(ItemID) With objitem .ItemCode = objItemEnt.ItemCode .ItemName = objItemEnt.ItemName .Description = objItemEnt.Description .NameofType = objItemEnt.NameofType .TypeofPricing = objItemEnt.TypeofPricing .OnStock = objItemEnt.OnStock .ItemPrice = objItemEnt.ItemPrice .DateModified = objItemEnt.DateModified End With Return objitem End Using Catch ex As Exception Throw End Try End Function This code is for my data access layer. Public Function Load_ItemDetails(ByVal ItemCode As String) Dim objitem As New tblitem Try Using entItem = New DAL.systemdbEntities1 Dim qryUsers = From p In entItem.tblitems Where p.ItemCode = ItemCode Select p Dim luser As List(Of tblitem) = qryUsers.ToList If luser.Count > 0 Then Return luser.First Else Return objitem End If End Using Catch ex As Exception Throw End Try End Function` For my Presentation layer: Private Sub Load_Item_Detail(ByVal ItemCode As String) objItem = New Items Using objLogic = New LogicalLayer objItem = objLogic.Load_ItemDetails(ItemCode) With objItem Me.ItemCodetxt.Text = .ItemCode Me.ItemNametxt.Text = .ItemName Me.ItemDesctxt.Text = .Description Me.ItemTypetxt.Text = .NameofType Me.ItemPricetxt.Text = .TypeofPricing Me.ItemOnstocktxt.Text = CStr(.OnStock) Me.ItemPricetxt.Text = CStr(.ItemPrice) Me.TextBox1.Text = CStr(.DateModified) Me.ItemCodetxt.Tag = .ItemCode End With End Using End Sub` and after I run, I get this error Nullable object must have a value help me. I'm stuck. I don't know what to do guys. I new in n tier architecture.

  Read the article

• PHP : If...Else...Query

  - by Rachel

  I am executing this statement under while (($data=fgetcsv($this->fin,5000,";"))!==FALSE) Now what I want in else loop is to throw exception only for data value which did not satisfy the if condition. Right now am displaying the complete row as I am not sure how to throw exception only for data which does not satisfy the value. Code if ((strtotime($data[11]) &&strtotime($data[12])&&strtotime($data[16]))!==FALSE && ctype_digit($data[0]) && ctype_alnum($data[1]) && ctype_digit($data[2]) && ctype_alnum($data[3]) && ctype_alnum($data[4]) && ctype_alnum($data[5]) && ctype_alnum($data[6]) && ctype_alnum($data[7]) && ctype_alnum($data[8]) && $this->_is_valid($data[9]) && ctype_digit($data[10]) && ctype_digit($data[13]) && $this->_is_valid($data[14])) { //Some Logic } else { throw new Exception ("Data {$data[0], $data[1], $data[2], $data[3], $data[4], $data[5], $data[6], $data[7], $data[8], $data[9], $data[10], $data[11], $data[12], $data[13], $data[14], $data[16]} is not in valid format"); } Guidance would be highly appreciated as to how can I throw exception only for data which did not satisfy the if value.

  Read the article

• How can I set paperclip's storage mechanism based on the current Rails environment?

  - by John Reilly

  I have a rails application that has multiple models with paperclip attachments that are all uploaded to S3. This app also has a large test suite that is run quite often. The downside with this is that a ton of files are uploaded to our S3 account on every test run, making the test suite run slowly. It also slows down development a bit, and requires you to have an internet connection in order to work on the code. Is there a reasonable way to set the paperclip storage mechanism based on the Rails environment? Ideally, our test and development environments would use the local filesystem storage, and the production environment would use S3 storage. I'd also like to extract this logic into a shared module of some kind, since we have several models that will need this behavior. I'd like to avoid a solution like this inside of every model: ### We don't want to do this in our models... if Rails.env.production? has_attached_file :image, :styles => {...}, :storage => :s3, # ...etc... else has_attached_file :image, :styles => {...}, :storage => :filesystem, # ...etc... end Any advice or suggestions would be greatly appreciated! :-)

  Read the article

• Website badge system

  - by linkyndy

  I am currently working on a widget-based website, built entirely on user socialization. Since a reputation system pays off for attracting users, I decided to implement one of these. Now, I would like to hear some solutions on how should this be implemented the right way (take, for example, Foursquare's badge system). Basically, I need to be able to do the following: have a badges table, where I can add, edit and delete badges; be able to enable and disable a badge; be able to introduce a new badge, but without writing new code - simply give some parameters to the add badge form regarding what should be followed in order for a user to receive a badge; be able to give badges in real time - meaning that whenever a user accomplishes whatever it needs to receive a badge, the system should know immediately to give the badge to that user; also, the system should not be overloaded with "badge listeners" - I believe interrogating each user request with every badge requirements is time consuming; These being said, I would like to hear your opinions on how to implement the right way a badge system (logic, database schema, methods etc.) Thank you very much!

  Read the article

• PHP foreach help

  - by sea_1987

  Hello I have an array that looks like this, Array ( [cfi_title] => Mr [cfi_firstname] => Firstname [cfi_surname] => Lastname [cfi_email] => [email protected] [cfi_subscribe_promotional] => [cfi_tnc] => [friendsName] => Array ( [0] => Firstname 1 [1] => Firstname 2 [2] => Firstname 3 ) [friendsEmail] => Array ( [0] => [email protected] [1] => [email protected] [2] => [email protected] ) [submit_form] => Submit ) My dilema is I need to save the values from the friendsName and friendsEmail arrays into a database, I know I can loop through them but how can I send the matching data, for example I need to save [friendsName][0] and friendsEmail][0] on the same row of database? I know I need to use a foreach but I just cannot figure out the logic.

  Read the article

• Checking Selected Radio Button after POST

  - by coffeeaddict

  I've been using ASP.NET controls which perform a lot of the manual for you. But I'm going back to the basics, what everyone else does. I'm using standard input tags. So for example if I have a radio button group and I select a button. When the form submits and does a POST back to whatever action="MyPage.aspx" then to grab and check the radio button's value that was selected is it always done like this below? <label><input type="radio" name="rbGroup" value='<%# ((Action)Container.DataItem).ID %>'/><%# ((Action)Container.DataItem).Name %></label> So here I'm appending the ID to the value. And then when it hits the page that my action specifies, I'm checking to see which was selected by trimming off and getting that ID from the value: string selection = Request.Form["rbGroup"]; string dbRecordIdSelected = int.Parse(selection.Substring(1)); so now I can check the id they selected...that is the ID of the db record that gave that selected radio it's name. Is that how you basically always check what radio was selected by checking the name/value pair that comes across for that selected radioButton group name? And then you can append stuff like IDs or whatever you want to grab and parse out to then do additional logic on the server-side once that header reaches the server and your specified page in the action attribute? The above code is not production code, just something to explain what I'm talking about.

  Read the article

• [SOLVED]Django - Passing variables to template based on db

  - by George 'Griffin

  I am trying to add a feature to my app that would allow me to enable/disable the "Call Me" button based on whether or not I am at [home|the office]. I created a model in the database called setting, it looks like this: class setting(models.Model): key = models.CharField(max_length=200) value = models.CharField(max_length=200) Pretty simple. There is currently one row, available, the value of it is the string True. I want to be able to transparently pass variables to the templates like this: {% if available %} <!-- Display button --> {% else %} <!-- Display grayed out button --> {% endif %} Now, I could add logic to every view that would check the database, and pass the variable to the template, but I am trying to stay DRY. What is the best way to do this? UPDATE I created a context processor, and added it's path to the TEMPLATE_CONTEXT_PROCESSORS, but it is not being passed to the template def available(request): available = Setting.objects.get(key="available") if open.value == "True": return {"available":True} else: return {} UPDATE TWO If you are using the shortcut render_to_response, you need to pass an instance of RequestContext to the function. from the django documentation: If you're using Django's render_to_response() shortcut to populate a template with the contents of a dictionary, your template will be passed a Context instance by default (not a RequestContext). To use a RequestContext in your template rendering, pass an optional third argument to render_to_response(): a RequestContext instance. Your code might look like this: def some_view(request): # ... return render_to_response('my_template.html', my_data_dictionary, context_instance=RequestContext(request)) Many thanks for all the help!

  Read the article

• GIT: head has dissapeared, want to merge it into master.

  - by samgoody

  The top image is the output of: git reflog. The bottom is what GITK in GIT GUI (msysgit) shows me when I look at all branch history. The last few commits do not show on GIT GUI. Why do they not show on GITK (at least as a branch or something)? How do I merge them into master? I gather this happened when I checked out tag 0.42. Why is that not the same as master? (I had tagged the master in its latest state) When I click push, why does the remote repo claim to be up to date.. shouldn't it try to update these commits into whatever branch they are in? The first of the questions is important - I would like to begin to understand what GIT is thinking. It's more oracle than logic at this point. If it makes a difference to see the earlier history, the project is a [pretty powerful] JS color picker that can be viewed here in its entirety.

  Read the article

• Need some help understanding a weird C behavior

  - by mike

  This part of my code works fine: #include <stdio.h> int main(){ //char somestring[3] = "abc"; int i, j; int count = 5; for((i=0) && (j=0); count > 0; i++ && j++){ printf("i = %d and j = %d\n", i, j); count--; } return 0; } The output as expected: i : 0 and j : 0 i : 1 and j : 1 i : 2 and j : 2 i : 3 and j : 3 i : 4 and j : 4 Things get weird when I uncomment the char string declaration on the first line of the function body. #include <stdio.h> int main(){ char somestring[3] = "abc"; ... } The output: i : 0 and j : 4195392 i : 1 and j : 4195393 i : 2 and j : 4195394 i : 3 and j : 4195395 i : 4 and j : 4195396 What's the logic behind this? I'm using gcc 4.4.1 on Ubuntu 9.10.

  Read the article

• Please help!! Is there a better way to write this LINQ query

  - by Raj Aththanayake

  Hi Is there a better simplified way to write this query. My logic is if collection contains customer ids and countrycodes, do the query ordey by customer id ascending. If there are no contain id in CustIDs then do the order by customer name. Is there a better way to write this query? I'm not really familiar with complex lambdas. var custIdResult = (from Customer c in CustomerCollection where (c.CustomerID.ToLower().Contains(param.ToLower()) && (countryCodeFilters.Any(item => item.Equals(c.CountryCode))) ) select c).ToList(); if (custIdResult.Count > 0) { return from Customer c in custIdResult ( c.CustomerName.ToLower().Contains(param.ToLower()) && countryCodeFilters.Any(item => item.Equals(c.CountryCode)) ) orderby c.CustomerID ascending select c; } else { return from Customer c in CustomerCollection where ( c.CustomerName.ToLower().Contains(param.ToLower()) && countryCodeFilters.Any(item => item.Equals(c.CountryCode)) ) orderby c.CustomerName descending select c; }

  Read the article

• LinqtoSql Pre-compile Query problem with Count() on a group by

  - by Joe Pitz

  Have a LinqtoSql query that I now want to precompile. var unorderedc = from insp in sq.Inspections where insp.TestTimeStamp > dStartTime && insp.TestTimeStamp < dEndTime && insp.Model == "EP" && insp.TestResults != "P" group insp by new { insp.TestResults, insp.FailStep } into grp select new { FailedCount = (grp.Key.TestResults == "F" ? grp.Count() : 0), CancelCount = (grp.Key.TestResults == "C" ? grp.Count() : 0), grp.Key.TestResults, grp.Key.FailStep, PercentFailed = Convert.ToDecimal(1.0 * grp.Count() / tcount * 100) }; I have created this delegate: public static readonly Funct<SQLDataDataContext, int, string, string, DateTime, DateTime, IQueryable<CalcFailedTestResult>> GetInspData = CompiledQuery.Compile((SQLDataDataContext sq, int tcount, string strModel, string strTest, DateTime dStartTime, DateTime dEndTime, IQueryable<CalcFailedTestResult> CalcFailed) => from insp in sq.Inspections where insp.TestTimeStamp > dStartTime && insp.TestTimeStamp < dEndTime && insp.Model == strModel && insp.TestResults != strTest group insp by new { insp.TestResults, insp.FailStep } into grp select new { FailedCount = (grp.Key.TestResults == "F" ? grp.Count() : 0), CancelCount = (grp.Key.TestResults == "C" ? grp.Count() : 0), grp.Key.TestResults, grp.Key.FailStep, PercentFailed = Convert.ToDecimal(1.0 * grp.Count() / tcount * 100) }); The syntax error is on the CompileQuery.Compile() statement It appears to be related to the use of the select new {} syntax. In other pre-compiled queries I have written I have had to just use the select projection by it self. In this case I need to perform the grp.count() and the immediate if logic. I have searched SO and other references but cannot find the answer.

  Read the article

• UPDATE Table SET Field

  - by davlyo

  This is my Very first Post! Bear with me. I have an Update Statement that I am trying to understand how SQL Server handles it. UPDATE a SET a.vField3 = b.vField3 FROM tableName a INNER JOIN tableName b ON a.vField1 = b.vField1 AND b.nField2 = a.nField2 – 1 This is my query in its simplest form. vField1 is a Varchar nField2 is an int (autonumber) vField3 is a Varchar I have left the WHERE clause out so understand there is logic that otherwise makes this a nessessity. Say vField1 is a Customer Number and that Customer has 3 records The value in nField2 is 1, 2, and 3 consecutively. vField3 is a Status When the Update comes to a.nField2 = 1 there is no a.nField2 -1 so it continues When the Update comes to a.nField2 = 2, b.nField2 = 1 When the Update comes to a.nField2 = 3, b.nField2 = 2 So when the Update is on a.nField2 = 2, alias b reflects what is on the line prior (b.nField2 = 1) And it SETs the Varchar Value of a.vField3 = b.vField3 When the Update is on a.nField2 = 3, alias b reflects what is on the line prior (b.nField2 = 2) And it (should) SET the Varchar Value of a.vField3 = b.vField3 When the process is complete –the Second of three records looks as expected –hence the value in vField3 of the second record reflects the value in vField3 from the First record However, vField3 of the Third record does not reflect the value in vField3 from the Second record. I think this demonstrates that SQL Server may be producing a transaction of some sort and then an update. Question: How can I get the DB to Update after each transaction so I can reference the values generated by each transaction?

  Read the article

• Integration testing - can it be done right?

  - by Max

  I used TDD as a development style on some projects in the past two years, but I always get stuck on the same point: how can I test the integration of the various parts of my program? What I am currently doing is writing a testcase per class (this is my rule of thumb: a "unit" is a class, and each class has one or more testcases). I try to resolve dependencies by using mocks and stubs and this works really well as each class can be tested independently. After some coding, all important classes are tested. I then "wire" them together using an IoC container. And here I am stuck: How to test if the wiring was successfull and the objects interact the way I want? An example: Think of a web application. There is a controller class which takes an array of ids, uses a repository to fetch the records based on these ids and then iterates over the records and writes them as a string to an outfile. To make it simple, there would be three classes: Controller, Repository, OutfileWriter. Each of them is tested in isolation. What I would do in order to test the "real" application: making the http request (either manually or automated) with some ids from the database and then look in the filesystem if the file was written. Of course this process could be automated, but still: doesn´t that duplicate the test-logic? Is this what is called an "integration test"? In a book i recently read about Unit Testing it seemed to me that integration testing was more of an anti-pattern?

  Read the article

• How to create a class by reading from another class (.cs) file with Powershell?

  - by Razcer

  I have this POGO ( simple putter getter) class that I am trying to read in PowerShell using System; using System.Runtime.Serialization; namespace MyApp.VM { [Serializable] public class MyClassVM { public Int64 CtrId { get; set; } public string CtrName { get; set; } public string CtrPhone { get; set; } public string CtrZip { get; set; } public DateTime AddDate { get; set; } } } Here is the ps1 code that is trying to read the class from a file. function Build-Pogo { $FileDir = "D:\YourDirectoryOfPogo" $ClassName = "MyClassVM" $FileName = $FileDir + "\" + $ClassName + ".cs" # Build the class from the file $AllLines = [string]::join([environment]::newline, (Get-Content $FileName)) Add-Type -TypeDefinition $AllLines # spin thru each property for class $ClassHandle = New-Object -typeName $ClassName $ClassHandle | ForEach-Object {Write-Host $_.name -foregroundcolor cyan} } *Note the last line is placeholder for more complex logic to come later. This breaks at the Add-Type with this error message for each get/set in the file. 'MyApp.VM.MyClassVM.CtrId.get' must declare a body because it is not marked abstract or extern Any info on what I'm doing wrong will be greatly appreciated.

  Read the article

• Creation of AsyncTask taking too much time Android

  - by user2842342

  I am making a network call in an AsyncTask, but the problem i am facing is the amount of time it is taking to start the doInBackground method. Here is a part of my code: button.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View v) { Log.d("Temp:",System.currentTimeMillis()+""); new Move().execute(); /*some other logic } } And my AsyncTask is: private class Move extends AsyncTask<Void, Void, Void> { @Override protected Void doInBackground(Void... temp) { Log.d("start:",System.currentTimeMillis()+""); gson.fromJson(Web.Request.get(some_URL),Void.class); Log.d("end:",System.currentTimeMillis()+""); return null; } } These are the logs i got: 32658-998/com.example.game D/temp:? 1408923006159 32658-998/com.example.game D/start:? 1408923035163 32658-998/com.example.game D/end:? 1408923035199 So actually it took almost 29 secs to reach the first line in doInBackground method, where as it took just 36 ms to finish the network call. I tried it many times, the time taken is almost in the same order. Is it possible to start the AsyncTask immediately? Or is there any other way to solve this problem.(other than a running a simple thread?) Thank you :)

  Read the article

• Pulling Data out of an object in Javascript

  - by PerryCS

  I am having a problem retreiving data out of an object passed back from PHP. I've tried many different ways to access this data and none work. In Firebug I see the following... (it looks nicer in Firebug) - I tried to make this look as close to Firebug as possible results Object { data="{"formName":"form3","formData":"data goes here"}", phpLiveDebug="<...s: 198.91.215.227"} data "{"formName":"form3","formData":"data goes here"}" phpLiveDebug "<...s: 198.91.215.227" I can access phpLiveDebug no problem, but the data portion is an object. I have tried the following... success: function(results) { //$("#formName").val(results.data.formName); //$("#formName").val(results.data[0].formName); //$("#formName").val(results.data[0]); //$("#formName").val(results.data[1]); //$("#formName").val(results.data[0]["formName"]); var tmp = results.data[formName]; alert("!" + tmp + "!"); $("#formName").val(tmp); $("#jqueryPHPDebug").val(results.phpLiveDebug); } This line works in the example above... $("#jqueryPHPDebug").val(results.phpLiveDebug); but... I can't figure out how to get at the data inside the results.data portion... as you can see above, I have been trying different things and more not even listed there. I was really hoping this line would work :) var tmp = results.data[formName]; But it doesn't. So, after many days of reading, tinkering, my solution was to re-write it to return data similar to the phpLiveDebug but then I thought... it's gotta be something simple I'm overlooking... Thank you for your time. Please try and explain why my logic (my horrible attempts at trying to figure out the proper method) above is wrong if you can?

  Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >