Search Results

Search found 17374 results on 695 pages for 'option strict'.

Page 180/695 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

• ubuntu 9.10 installer doesn't recognize the hard drive

  - by dan

  I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

  Read the article

• Computer won't go into standby

  - by Robert

  When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

  Read the article

• CentOS Installation on a Cisco MCS 7800

  - by William

  I'm having some problems installing CentOS 5.5 Final (i386) onto my server, a Cisco MCS 7800. The problem comes very early into the installation. When the welcome screen comes up and gives you the option on how to boot into the DVD, I'll press enter to go into the graphical installer. The screen will then have a blinking cursor in the top left of the screen and will never go away (I thought that it just might need time but I let it sit for over 5 hours). I then booted into it again and tried using Linux Text thinking it was a problem with the graphical installer. That didn't work, same problem. Then I tried a DVD of RHEL 5 and got the same problem, both graphical and Linux text. At this point I think it's a hardware problem. The server has 2GB of ECC RAM, 1 Pentium 4 CPU @ 3.06GHZ and 2 WD Hard Drives (80GB) configured for RAID 0. (There is also an option in the BIOS for what OS type and that is set to Linux.) If anyone has any idea what is going on, it would be helpful. Edit Typing "text" doesn't change a thing. Still stuck at the blinking cursor. I looked it up and it's really the same thing as typing "linux text", which as stated in the first part of my question, I've already done.

  Read the article

• Increse gap (pause) between songs

  - by holms

  Hello, I googled a lot before asking. This is really a problem. I know that there's an option in preference to switch off cross fading, but this is not what I want to do. Cross fading doesn't add any gap at all. If there's no gap between two songs, so you won't hear any. I need a real GAP between song, I mean a REAL pause about 2 seconds. Why? My MD player can't handle songs if there are no gaps in line input. Even with 1 second gap MD records 2 songs as 1. Is there any software that can increase the gap in the playlist? I know that Winamp has a plugin for putting pauses between songs. Is there anything for iTunes or Mac OS X? Another work around is to add a 2 sec MP3 between each song in the playlist but this is really killing me to do. I'm more on lossless stuff, so .CUE files would be an option too (using XLD for converting)

  Read the article

• Changing Corosync/Heartbeat pair's active node based on MySQL/Galera cluster state

  - by Hace

  Background I'm planning on building a High Availability "cluster" for our Zabbix instance by placing two physical servers in one server room and two in another server room. In each server room one of the physical servers will run Zabbix on RHEL and the other will run Zabbix's MySQL database, also on RHEL. I'd prefer synchronous replication for the MySQL nodes so I'm planning on using Galera in a master-slave configuration. The Zabbix instances on the two Zabbix servers would be controlled by Heartbeat/Corosync (although Red Hat Cluster Suite is also an option...) If the Zabbix server in Server Room A goes down, the one in Server Room B becomes active (and vice versa). Ditto for the MySQL servers/instances. If either of those cases happen, however, the connection between the Zabbix server and the MySQL server becomes significantly slower as ti has to travel over WAN. Question Is it possible to configure the Heartbeat/CoroSync pair to instruct the MySQL/Galera cluster to change the master node to switch to (if available) the one that's in the server room as the active Heartbeat/Corosync -node and (more challengingly) is it possible to do the same in the other direction, i.e have the Galera cluster change the active Heartbeat/CoroSync server to be in the same room as the active MySQL master server in case of a failover in over to avoid unnecessary WAN transfers between the application and its DB? Theories Most likely I can get CoroSync to run something that'd log in to one of the DB nodes to change the MySQL/Galera master but I don't know if it's really possible to do anything similar in the other direction in Galera. Is it possible to define a "service" in CoroSync/Heartbeat so that both the service and its MySQL service would migrate as one if possible. Using the DB server that's behind WAN should still be a better option to DB downtime. Am I just using too many tools to solve a problem that'd be far simpler with something else?

  Read the article

• Torrent upload ratio not updated on Synology DS212+

  - by user179271

  I have a Synology DS212+ NAS running DSM 4.2-3211 (current version). I use it for several purposes including torrent download using Download Station and a tracker that needs authentication. My problem is that my download/upload ratio isn't updated, so it constantly falls down. My NAS is behind a router, and I configured the NAT to forward ports 6890 to 6999 to the internal IP address of the NAS. Here are the Download Station settings : TCP port : 6990, Sharing ratio : 900%, Sharing time : infinite, max download speed : 0 (no limit), max upload speed : 0 (no limit), BT protocol encryption : checked, max numbers of peers allowed by torrent file : 4000, DHT : checked, with port 6889. When the DHT option is not checked, the NAS doesn't upload any files. I don't know what is this option for. Can someone help me to solve this problem ? Did I miss any step, or does it come from the NAT ? How is the authentication managed by Dowload Station ? (Sorry for my english) Thanks.

  Read the article

• How to Eliminate Black Bars from Powerpoint videos ?

  - by appu

  Hi, I am running a digital signage system for my client. The basic installation is a vertically oriented 42" LCD TV with a 1920x1080 screen resolution (reverse of 1920x1080 when setup normally, i.e. landscaped). Please check out the following link for a basic screen divisions layout I want to setup. http://flickr.com/photos/55097319@N03/5410208856 In the division labeled "ppt" I plan to run a powerpoint presentation. The screen division is 360x1476 resolution. As there isn't an option in powerpoint to specify slide size in terms of resolution so according to this article on indezine http://indezine.com/products/powerpoint/books/perfectmedicalpres02.html to get a screen resolution of my preference I divided 360 and 1476 each by 72 which gives me 5"x 20.5" as the slide size for my ppt. After setting up slide size as per above dimensions, I used sizer (http://brianapps.net) to resize my ppt window to 360x1476 so that when I record I do not get any black bars. But after launching recording there are side black bars visible which camtasia records and brings-inside cam studio with black bars. http://www.flickr.com/photos/55097319@N03/5409597049 My question is that after doing the above and as explained in the following video link why do I still get black bars. http://feedback.techsmith.com/techsmith/topics/eliminate_black_bars_in_your_powerpoint_recordings Is there an option in camtasia to stretch the recording to cover up black bars or any other alternative way I can get rid of those black bars while I get a ppt recorded as per my preferred dimensions. Notes: In the techsmith video above it asks to adjust my desktop screen resolution which my display chipset does not allow me to set. I set up show in powerpoint to be "browsed by an individual(window)". Also signage software only supports swf's and video file formats natively and not ppt, pptx etc. Thanks bhavani.

  Read the article

• Setup Entourage for Exchange via HTTP communication

  - by Johandk

  Our ISP set up a hosted exchange server for all our mail. I've setup all our Outlook users with no problems. We have two people using Mac OSX Leopard and Entourage. Entourage has the option of adding an Exchange account, but I have no idea how to tell it to connect to exchange via HTTP. Heres an excerpt from the client setup docs the hosting company sent me for Outlook: 1 .Go to control panel 2. Select ‘Mail’ 3. Select ‘Email accounts’ Under the E-mail tab select ‘New’ Select ‘Manually configure server settings......’ - click next Select ‘Microsoft Exchange’ – click next Complete details as below with Microsoft Exchange Server as: [server address] Do not select ‘Check Name’. Instead select ‘More Settings’. Go to the Connection tab, and select the bottom option ‘Connect to Microsoft Exchange using HTTP’. And then select the ‘Exchange Proxy Settings’ button. Enter Proxy server for Exchange Check Only connect to proxy servers that have this principal name in their certificate, Enter msstd:[servername] Proxy Authentication - select Basic Authentication Select OK, and again, so that you return to the main screen. Now select ‘Check Name’. Enter Username and Password: The username should now be the full name and underlined. If so select next, and then finish. Next time you open Outlook, enter username and password Any help GREATLY appreciated.

  Read the article

• MAMP MySQL won't start

  - by Tony

  I uninstalled MAMP completely, downloaded fresh copy of MAMP 2 from the MAMP website, did a clean install. However, when I try to start mysql, I get the following error log 111120 21:37:49 mysqld_safe Starting mysqld daemon with databases from /Applications/MAMP/db/mysql 111120 21:37:50 [Warning] You have forced lower_case_table_names to 0 through a command-line option, even though your file system '/Applications/MAMP/db/mysql/' is case insensitive. This means that you can corrupt a MyISAM table by accessing it with different cases. You should consider changing lower_case_table_names to 1 or 2 111120 21:37:50 [Note] Plugin 'FEDERATED' is disabled. 111120 21:37:50 InnoDB: The InnoDB memory heap is disabled 111120 21:37:50 InnoDB: Mutexes and rw_locks use GCC atomic builtins 111120 21:37:50 InnoDB: Compressed tables use zlib 1.2.3 111120 21:37:50 InnoDB: Initializing buffer pool, size = 128.0M 111120 21:37:50 InnoDB: Completed initialization of buffer pool 111120 21:37:50 InnoDB: highest supported file format is Barracuda. 111120 21:37:50 InnoDB: Waiting for the background threads to start 111120 21:37:51 InnoDB: 1.1.5 started; log sequence number 1595675 111120 21:37:51 [ERROR] /Applications/MAMP/Library/bin/mysqld: unknown option '--skip-locking' 111120 21:37:51 [ERROR] Aborting 111120 21:37:51 InnoDB: Starting shutdown... 111120 21:37:51 InnoDB: Shutdown completed; log sequence number 1595675 111120 21:37:51 [Note] /Applications/MAMP/Library/bin/mysqld: Shutdown complete 111120 21:37:51 mysqld_safe mysqld from pid file /Applications/MAMP/tmp/mysql/mysql.pid ended I've no clue why this is happening. I googled around and made sure that no instance of MySQL is running. Nothing seems to help.

  Read the article

• Unattended Kickstart Install

  - by Eric

  I've looked around quite a bit and have seen similar setup and questions, but none seem to work for me. I'm using the following command to create a custom ISO: /usr/bin/livecd-creator --config=/usr/share/livecd-tools/test.ks --fslabel=TestAppliance --cache=/var/cache/live This works great and it creates the ISO with all of the packages and configs I want on it. My issue is that I want the install to be unattended. However, every time I start the CD, it asks for all of the info such as keyboard, time zone, root password, etc. These are my basic settings I have in my kickstart script prior to the packages section. cdrom install autopart autostep xconfig --startxonboot rootpw testpassword lang en_US.UTF-8 keyboard us timezone --utc America/New_York auth --useshadow --enablemd5 selinux --disabled services --enabled=iptables,rsyslog,sshd,ntpd,NetworkManager,network --disabled=sendmail,cups,firstboot,ip6tables clearpart --all So after looking around, I was told that I need to modify my isolinux.cfg file to either do "ks=http://X.X.X.X/location/to/test.ks" or "ks=cdrom:/test.ks". I've tried both methods and it still forces me to go through the install process. When I tail the apache logs on the server, I see that the ISO never even tries to get the file. Below are the exact syntax I'm trying on my isolinux.cfg file. label http menu label HTTP kernel vmlinuz0 append initrd=initrd0.img ks=http://192.168.56.101/files/test.ks ksdevice=eth0 label localks menu label LocalKS kernel vmlinuz0 append initrd=initrd0.img ks=cdrom:/test.ks label install0 menu label Install kernel vmlinuz0 append initrd=initrd0.img root=live:CDLABEL=PerimeterAppliance rootfstype=auto ro liveimg liveinst noswap rd_NO_LUKS rd_NO_MD rd_NO_DM menu default EOF_boot_menu The first 2 give me a "dracut: fatal: no or empty root=" error until I give it a root= option and then it just skips the kickstart completely. The last one is my default option that works fine, but just requires a lot of user input. Any help would be greatly appreciated.

  Read the article

• Managing disk in a VM

  - by dst

  I'm replacing my two old rack servers with a new one that has plenty of power to take over the functionality my current servers. The server is a 4U rack mount with 16 3.5" SAS drive bays, two 2.5" bays, a Xeon E3-1230v2 CPU and 32GB of ECC RAM. My issue is the following. I would like to have a FreeBSD file server with ZFS managing disks. However, I need other VMs for e.g. a shell/git server, mail server etc. I'm wondering how to deal with the following issues: I want ZFS to fully manage the disks, so I'm not using any hardware RAID. Should I pass the SAS controller directly to the FreeBSD system as passthrough PCI? I want to maximize the reliability of the setup. On what disks should I install the hypervsor and keep server system disks? For (2) I have the option of having a RAID setup on the SAS controller and using that as system disk to store the hypervisor as well as VM images. However, this makes PCI passthrough to the file server impossible. Another option is using the two 2.5" bays. In terms of reliability how are SSDs compared to e.g. WD RE4 disks? Would it make sense to have two SSDs in software RAID as boot disks for the hypervisor or should I just go with e.g. WD RE4 disks in a software RAID setup. I also need to think about where to store the mails for the mail server, but this could be done over NFS between the VMs. BTW, this is for home use, so the load is not really that big. What I'm looking for is best practices for splitting up a server.

  Read the article

• Server freezes while installing Redhat Enterprise Linux Server 6

  - by eisaacson

  We've tried both the first options Install or upgrade an existing system Install system with basic video driver When trying option #1, it gets to a screen that has a solid cursor about halfway down, then freezes. When trying option #2, it freezes at the point where it says: Waiting for hardware to initialize... Of course, we bought the unsupported version and haven't found anything to help us so far. Here are the specs to the server in the original post: ASUS P8Z68-M Pro LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard with UEFI BIOS RAIDMAX Reiter ATX-305WBP Black Steel / Plastic ATX Mid Tower Computer Case 450W Power Supply Intel Core i7-2600 Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 2000 BX80623I72600 16GB Ram OCZ Agility 3 SSD 120GB From some of the posts out there could the UEFI Bios or the Sandy Bridge processor be a culprit here? We just tried the DVD on a different computer and it got past that point with ease. It's a standard Dell build compared to our custom machine. Could it be having difficulty recognizing drivers? How do we get past that?

  Read the article

• Automate creation of Windows startup script?

  - by Niten

  Is there a good way to automate installing local startup (rather than login) scripts in Windows XP and Windows 7, via the command line, WMI, COM, or otherwise (even Win32 if it comes to that)? I need to setup a local startup script on a large number of computers, and unfortunately, Active Directory is absolutely not an option. I would like to write a script or small program that I can run on each computer to perform the startup script installation in order to save myself a lot of error-prone point-and-click manual labor. I see that when one uses gpedit.msc to create a local startup script, information about the script gets stored in the registry here: HKLM\Software\Policies\Microsoft\Windows\System\Scripts\Startup However, if you create such a script and then delete its registry key, the script will remain listed in the local Group Policy editor; as is so often the case in Windows, apparently there is more going on there than meets the eye. This leads me to question whether it's safe to manually add subkeys for new startup scripts here (I wouldn't want my script to be overwritten by later changes made using the local Group Policy editor, for instance)... Another option that's occurred to me is to create an item in the Task Scheduler configured to run at system startup. However, my concerns there are twofold: Can this be automated any more easily? For instance, the at command doesn't appear to let you schedule a task for system startup, and WMI's Win32_ScheduledJob interface looks unreliable (it fails to show any of my currently scheduled tasks, for one thing). Would I be able to prevent users from logging in until the scheduled startup task is completed, as can be done with "normal" Windows startup scripts? Thanks in advance for any suggestions, I've been banging my head against this one for a bit...

  Read the article

• How can I cause Task Scheduler to "fail" if a dialog box returns a certain result?

  - by Roger

  I'm working on a VBScript to do a weekly reboot of all machines on our network. I want to run this script via Task Scheduler. The script runs at 3:00 AM, but there is a small chance that users may still be on the network at that time, and I need to give them the option to terminate the reboot. If they do so, I would like the reboot to occur the next night at 3:00 AM. I've set Task Scheduler up to repeat in this way. So far, so good. The problem is that if the user selects "Cancel" in my script, the Task Scheduler does not see my task as failed, and won't run it again the next night. Any ideas? Can I pass an errorcode to task scheduler or otherwise abort the task via VBScript? My code is below: Option Explicit Dim objShell, intShutdown Dim strShutdown, strAbort ' -r = restart, -t 600 = 10 minutes, -f = force programs to close strShutdown = "shutdown.exe -r -t 600 -f" set objShell = CreateObject("WScript.Shell") objShell.Run strShutdown, 0, false 'go to sleep so message box appears on top WScript.Sleep 100 ' Input Box to abort shutdown intShutdown = (MsgBox("Computer will restart in 10 minutes. Do you want to cancel computer restart?",vbYesNo+vbExclamation+vbApplicationModal,"Cancel Restart")) If intShutdown = vbYes Then ' Abort Shutdown strAbort = "shutdown.exe -a" set objShell = CreateObject("WScript.Shell") objShell.Run strAbort, 0, false End if Wscript.Quit Appreciate any thoughts.

  Read the article

• freebsd-update failure

  - by ctuffli

  Some time ago, I upgrade my FreeBSD box to 7.1-RC2, but now I'd like to move to 7.2-RELEASE. I tried running # uname -mrsi FreeBSD 7.1-RC2 i386 GENERIC # freebsd-update upgrade -r 7.2-RELEASE Looking up update.FreeBSD.org mirrors... 3 mirrors found. Fetching metadata signature for 7.1-RC2 from update4.FreeBSD.org... failed. Fetching metadata signature for 7.1-RC2 from update5.FreeBSD.org... failed. Fetching metadata signature for 7.1-RC2 from update2.FreeBSD.org... failed. No mirrors remaining, giving up. Substituting 7.1 for 7.2 gives the same error. Adding a --debug option shows the failure as being fetch: http://update4.FreeBSD.org/7.1-RC2/i386/latest.ssl: Not Found Is there any way to still do a binary upgrade of this system as the 7.1-RC* directories don't exist on http://update.freebsd.org anymore? Upgrading from source is an option, but I wanted to see if there was some way to salvage this installation.

  Read the article

• Xmonad on windows laptop

  - by Kevin L.

  I'm a Linux developer in the market for a laptop. 90% of my time is spent in Emacs, the terminal, and Google Chrome, and I want to use them within the excellent Xmonad tiling windows manager. Given these constraints, I can only see two options: Run Linux on a laptop Run Windows on the laptop, and spend all of my time working within a Linux VM. Years of experience suggest that the first option will take many frustrating hours and probably be suboptimal w.r.t. battery life, wifi, and fn keys like screen brightness or audio adjustment. For the second option, what would be the ideal setup? I've had a lot of luck with Cooperative Linux on my Samsung NC-10 netbook (Windows XP), but I would have to setup the X11 server myself. What about using VirtualBox (which includes the guest VM's GUI)? Has anyone tried this? Hardware-wise, I'm looking for something in the "Macbook Air killer" category; Samsung Series 9 laptop, Lenovo IdeaPad U300s, &c. (i.e., matte screen, 5h+ battery life, 3ish pound weight). Price is not a consideration; any suggestions?

  Read the article

• How can I take a one time full backup of a Windows Server without the need for a restore program?

  - by TheCleaner

  I have a Windows SBS server with about 500GB of data that I'm decommissioning but I'd like to take a final backup of the server and place it on an external USB drive. I already have multiple backups of the server on disk from the past but they are through Simpana Commvault. I'd like a backup that will simply copy the file structure, ACLs, timestamps, etc. as is to a NTFS volume on the external drive. This way if someone says "I need x file on the server you decommed" I can search the external drive real quick instead of firing up Commvault, cataloging, restore, etc. I know the built-in Windows backup is great, I just don't feel like running it for a restore job on this. I'd like an option where in the future it won't require a program to run a restore. Rather a simple mount of the drive will suffice. I believe I can use robocopy just fine, but I'm not sure if it will grab the Windows directory, system files, and full user profiles correctly even with the /ZB option. Options? Is Robocopy /E /ZB /COPYALL /DCOPY:DAT /MT:32 /R:5 /W:5 /LOG:copylog.log the way to go here?

  Read the article

• SQL Error (1064) when importing data from SQL file

  - by mejpark

  I have a MySQL database, which was originally set up with the default latin1 character set and latin1_swedish_ci collation. I was using the database like this for sometime, until I noticed strange characters on my production web site, which is powered by a database exported from my development machine. At this point, I changed the default character set of the database and tables to utf8 and the collation to utf8_unicode_ci, converted the latin1 data inside each table to utf8 (using the 'convert data' option) and exported the database as a single SQL file using HeidiSQL. When the resulting SQL file is opened in Notepad++, several characters are rendered incorrectly. For example, en dashes (-) are displayed as – and e with accent (é) are displayed as é. I changed the encoding of the file from ANSI to UTF-8 (using the encoding menu option in Notepad++) and the offending characters are rendered correctly. I saved the new utf8-encoded SQL file and attempted to import the contents into the MySQL database on my production server. The import process fails with following error: /* SQL Error (1064): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '?# -------------------------------------------------------- # Host: ' at line 1 */ /* Error with snippets directory: The specified path was not found */ The head of the SQL file: # -------------------------------------------------------- # Host: 127.0.0.1 # Server version: 5.1.33-community # Server OS: Win32 # HeidiSQL version: 6.0.0.3773 # Date/time: 2011-04-20 09:48:36 # -------------------------------------------------------- It chokes on the first line of the file, which is commented out. Why is this happening? I didn't have a problem loading data from SQL files until I changed the character set and collation of the database. I came up with an ugly workaround to this problem by performing following steps: Export database as single SQL file using HeidiSQL Open resulting file in Notepad++ and convert from ANSI to UTF-8 encoding Create new empty file in Notepad++, paste in UTF-8 and save file normally What am I missing here?

  Read the article

• VMWare Setup with 2 Servers and a DAS (DELL MD3220)

  - by Kumala

  I am planning to use a VMWare based setup consisting of two VMWare servers (2 CPU, 256GB Memory) and a DAS (DELL MD3220 with 24x900GB disks). The virtual machines will be half running MS SQL databases (Application, Sharepoint, BI) and the other half of the VM will be file services, IIS. To enhance the capacity of the storage, we'll be adding a MD1220 enclosure with another 24x900GB to the MD3220. Both DAS will have 2 controllers. Our current measured IOPS is 1000 IOPS average, 7000 IOPS peak (those happen maybe twice per hour). We are in the planning phase now and are looking at the proper setup of the disks. The intention is to setup up both DAS one of the DAS with RAID 10 only and the other DAS with RAID 5. That will allow us to put the applications on the DAS that supports the application performance needs best. Question is how best to partition the two DASs to get best possible IOPS/MBps, each DAS will have to have 2 hot spares? For the RAID 5 Setup: Generally speaking, would it be better to have one single disk group across all 22 disks (24 - 2 hot spares) with both controllers assigned to the one disk group or is it better to have 2 disk groups each 11 disks, assigned to one of the two controllers? Same question for the RAID 10 setup: The plan is: 2 disks for logs (Raid 1), 2 Hotspare and 20 disks for RAID 10. Option 1: 5 * 4 disks (RAID 10), with two groups assigned to 1 controller and 3 groups to the other controller Option 2: One large RAID 10 across all the disks and have both controllers assigned to the same group? I would assume that there is no right or wrong, but it all depends very much on the specific application behaviour, so I am looking for some general ideas what the pros and cons are of the different options. IF there are other meaningful options, feel free to propose them.

  Read the article

• AWS VPC ELB vs. Custom Load Balancing

  - by CP510

  So I'm wondering if this is a good idea. I have a Amazon AWS VPC setup with a public and private subnets. So I all ready get the Internet Gateway and NAT. I was going to setup all my web servers (Apache2 isntances) and DB servers in the private subnet and use a Load Balancer/Reverse Proxy to pick up requests and send them into the private subnets cluster of servers. My question then, is Amazons ELB's a good use for these, or is it better to setup my own custom instance to handle the public requests and run them through the NAT using nginx or pound? I like the second option just for the sake of having a instance I can log into and check. As well as taking advantage of caching and fail2ban ddos prevention, as well as possibly using fail safes to redirect traffic. But I have no experience with their ELB's, so I thought I'd ask your opinions. Also, if you guys have an opinion on this as well, would using the second option allow me to only have 1 public IP address and be able to route SSH connections through port numbers to respective instances? Thanks in advance!

  Read the article

• Oracle Database Recovery Problem

  - by Palani

  I am very new to Oracle, and trying to restore a oracle 8i database on win 2000 server. I have one week old database backup (backup taken with exp command), and i want to restore it now. Now I am unable to login through sqlplus (got shutdown in progress error) I have a backup and i want to restore it, but oracle is not starting at all, and 'imp' command is failing. I started sqlplus / as sysdba and following is the log of what i am trying to do. Can some one guide me further. SQL> shutdown immediate; ORA-01109: database not open Database dismounted. ORACLE instance shut down. SQL> startup; ORACLE instance started. Total System Global Area 143423516 bytes Fixed Size 75804 bytes Variable Size 58105856 bytes Database Buffers 85164032 bytes Redo Buffers 77824 bytes Database mounted. ORA-01589: must use RESETLOGS or NORESETLOGS option for database open SQL> shutdown immediate; ORA-01109: database not open Database dismounted. ORACLE instance shut down. SQL> startup mount; ORACLE instance started. Total System Global Area 143423516 bytes Fixed Size 75804 bytes Variable Size 58105856 bytes Database Buffers 85164032 bytes Redo Buffers 77824 bytes Database mounted. SQL> alter database open; alter database open * ERROR at line 1: ORA-01589: must use RESETLOGS or NORESETLOGS option for database open SQL> alter database open resetlogs; alter database open resetlogs * ERROR at line 1: ORA-01245: offline file 1 will be lost if RESETLOGS is done ORA-01110: data file 1: 'C:\ORACLE\ORADATA\ABCD\SYSTEM01.DBF'

  Read the article

• Oracle logical standby fails with ORA-01919

  - by DCookie

  I have an Oracle logical standby database being managed via data guard. Just this morning the redo apply process began failing with an ORA-01919 error, indicating one of our application roles did not exist. However, I can see the role on both primary and standby databases. We also have a physical standby that has long since applied the redo where this is happening on the logical, without issue. I have opened an SR with Oracle. I was wondering if anyone out there has seen this before. I guess I should mention: Oracle 10.2.0.4, Win2003 Server SP2. UPDATE: So far, Oracle Support has not provided an answer. I thought I'd post here what I have learned so far. It appears that a grant of DBA on the primary host to a role works fine for users granted the role. It does not work on the logical standby. IOW: create role TEST; grant dba to TEST; grant TEST to auser; connect auser set role TEST; grant <existing role> to <existing user>; This works on the primary instance but fails on the logical. A workaround appears to be to grant each role on the primary to the role TEST with admin option in the logical: grant <existing role> to TEST with admin option; <== do this on the logical standby Then the command works on the logical standby.

  Read the article

• Creating an ec2 image on amazon fails at mkfs.ext3

  - by Dave Orr

  I'm trying to create an image of my ec2 instance in Amazon's cloud. It's been a bit of an adventure so far. I did manage to install Amazon's ec2-api-tools, which was harder than it seemed like it should have been. Then I ran: ec2-bundle-vol -d /mnt -k pk-{key}.pem -c cert-{cert}.pem -u {uid} -s 1536 Which returned: Copying / into the image file /mnt/image... Excluding: /sys/kernel/debug /sys/kernel/security /sys /proc /dev/pts /dev /dev /media /mnt /proc /sys /etc/udev/rules.d/70-persistent-net.rules /etc/udev/rules.d/z25_persistent-net.rules /mnt/image /mnt/img-mnt 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00677357 s, 155 MB/s mkfs.ext3: option requires an argument -- 'L' Usage: mkfs.ext3 [-c|-l filename] [-b block-size] [-f fragment-size] [-i bytes-per-inode] [-I inode-size] [-J journal-options] [-G meta group size] [-N number-of-inodes] [-m reserved-blocks-percentage] [-o creator-os] [-g blocks-per-group] [-L volume-label] [-M last-mounted-directory] [-O feature[,...]] [-r fs-revision] [-E extended-option[,...]] [-T fs-type] [-U UUID] [-jnqvFKSV] device [blocks-count] ERROR: execution failed: "mkfs.ext3 -F /mnt/image -U 1c001580-9118-4a50-9a25-dcf02be6d25f -L " So mkfs.ext3 wants -L, which is a volume name. But ec2-bundle-vol doesn't seem to take in a volume name as an argument, and the docs (http://docs.amazonwebservices.com/AmazonEC2/gsg/2006-06-26/creating-an-image.html) don't seem to think one should be needed. Certainly their sample command: # ec2-bundle-vol -d /mnt -k ~root/pk-HKZYKTAIG2ECMXYIBH3HXV4ZBZQ55CLO.pem -u 495219933132 -s 1536 doesn't specify anything. So... any help? What am I missing?

  Read the article

• How to figure out what VirtualBox did?

  - by AndrejaKo

  I'm trying to boot a custom made-in-ASM OS on my recent laptop. The OS is intended to be installed on a floppy and during make creates a bootable floppy. Since I don't have a floppy drive, I installed it on a virtual floppy. After that I used WinToFlash's create bootable MS-DOS USB drive option to transfer the floppy image to an USB flash drive. Then I tried to boot my computer from it but got only a repeating broken string on screen. After all that I made a virtual hard disk image form the flash drive using this tutorial and tried to boot a virtual machine from it. First time I got same problem as on real computer. I then used the reset option and next time and every time after that OS booted correctly. My question is: How do I figure out what exactly happened to the virtual machine between first and second boot? UPDATE I just created a new VM with default settings for windows XP and it has the same problem that I have on a real computer. I was unable to reproduce the procedure which made the first VM work correctly.

  Read the article

• Bash Parallelization of CPU-intensive processes

  - by ehsanul

  tee forwards its stdin to every single file specified, while pee does the same, but for pipes. These programs send every single line of their stdin to each and every file/pipe specified. However, I was looking for a way to "load balance" the stdin to different pipes, so one line is sent to the first pipe, another line to the second, etc. It would also be nice if the stdout of the pipes are collected into one stream as well. The use case is simple parallelization of CPU intensive processes that work on a line-by-line basis. I was doing a sed on a 14GB file, and it could have run much faster if I could use multiple sed processes. The command was like this: pv infile | sed 's/something//' > outfile To parallelize, the best would be if GNU parallel would support this functionality like so (made up the --demux-stdin option): pv infile | parallel -u -j4 --demux-stdin "sed 's/something//'" > outfile However, there's no option like this and parallel always uses its stdin as arguments for the command it invokes, like xargs. So I tried this, but it's hopelessly slow, and it's clear why: pv infile | parallel -u -j4 "echo {} | sed 's/something//'" > outfile I just wanted to know if there's any other way to do this (short of coding it up myself). If there was a "load-balancing" tee (let's call it lee), I could do this: pv infile | lee >(sed 's/something//' >> outfile) >(sed 's/something//' >> outfile) >(sed 's/something//' >> outfile) >(sed 's/something//' >> outfile) Not pretty, so I'd definitely prefer something like the made up parallel version, but this would work too.

  Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >