Search Results

Search found 18243 results on 730 pages for 'tcp connection'.

Page 180/730 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

• Can't access shared drive when connecting over VPN

  - by evolvd

  I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

  Read the article

• How to add Transactions with a DataSet created using the Add Connection Wizard?

  - by RoguePlanetoid

  I have a DataSet that I have added to my project where I can Insert and Add records using the Add Query function in Visual Studio 2010, however I want to add transactions to this, I have found a few examples but cannot seem to find one that works with these. I know I need to use the SQLClient.SQLTransaction Class somehow. I used the Add New Data Source Wizard and added the Tables/View/Functions I need, I just need an example using this process such as How to get the DataConnection my DataSet has used. Assuming all options have been set in the wizard and I am only using the pre-defined adapters and options asked for in this wizard, how to I add the Transaction logic to my Database. For example I have a DataSet called ProductDataSet with the XSD created for this, I have then added my Stock table as a Datasource and Added an AddStock method with a wizard, this also if a new item calls an AddItem method, if either of these fails I want to rollback the AddItem and AddStock in this case.

  Read the article

• mystery Internet traffic to port 445

  - by Ben Collver

  Recently, I noticed traffic from the office network to TCP port 445 on the Internet [a]. Below are the Linux firewall log entries to Facebook's network [b] and Google's network [c]. I would like to identify the source of this traffic. My first guess is that Facebook and Google might be using multiple TCP ports for SSL load balancing. However, I could not confirm this based on the web proxy logs. What else might it be? [a] http://support.microsoft.com/kb/204279 [b] Sep 4 08:30:03 firewall01 kernel: IN=eth0 OUT=eth2 SRC=10.0.0.131 DST=69.171.237.34 LEN=52 TOS=0x00 PREC=0x00 TTL=127 ID=14287 DF PROTO=TCP SPT=51711 DPT=445 WINDOW=8192 RES=0x00 SYN URGP=0 [c] Aug 28 06:02:41 firewall01 kernel: IN=eth0 OUT=eth2 SRC=10.0.0.115 DST=173.194.33.47 LEN=52 TOS=0x00 PREC=0x00 TTL=127 ID=4558 DF PROTO=TCP SPT=49294 DPT=445 WINDOW=8192 RES=0x00 SYN URGP=0

  Read the article

• Is Winpcap able to capture all packets going through a Gigabit NIC without missing any packets?

  - by Patrick L

  I want to use Winpcap to capture all network packets going through a Gigabit NIC of a server. Assuming that I am able to utilize the network link up to 100%, the maximum network speed is 1000Mbps. If we exclude the TCP/IP headers, the maximum TCP data rate should be roughly 940Mbps. Let's say I send a 1GB file through the NIC at 940Mbps using TCP destination port 6000. I use Winpcap to capture all network packets going through the NIC and then dump it to a pcap file. If I use Wireshark to analyze the pcap file and then check the sum of packet size for all network packets sent to TCP port 6000, am I able to get exactly 1GB from the pcap file? Thanks.

  Read the article

• Closing Connections on asynchronous messaging in JMS

  - by The Elite Gentleman

  Hi Everyone! I have created a JMS wrapper (similar to Springs JmsTemplate since I'm not using Springs) and I was wondering: If I setup asynchronous messaging, when is a good time to close connections and JMS relates resources (so that the Connection Factory in the Resource Pool can be available)? Thanks Here's the source code for receiving JMS messages public Message receive() throws JMSException { QueueConnection connection = null; QueueSession session = null; QueueReceiver consumer = null; try { // TODO Auto-generated method stub connection = factory.createQueueConnection(); if (connection != null && getExceptionListener() != null) { connection.setExceptionListener(getExceptionListener()); } session = connection.createQueueSession(isSessionTransacted(), getAcknowledgeMode()); consumer = session.createReceiver(queue); if (getMessageListener() != null) { consumer.setMessageListener(getMessageListener()); } //Begin connection.start(); if (getMessageListener() == null) { return null; } return receive(session, consumer); } catch (JMSException e) { // TODO: handle exception logger.error(e.getLocalizedMessage(), e); throw e; } finally { JMSUtil.closeMessageConsumer(consumer); JMSUtil.closeSession(session, false); //false = don't commit. JMSUtil.closeConnection(connection, true); //true = stop before close. } As you can see, if getMessageListener() != null then apply it to the MessageConsumer. Am I doing this correctly? The same approach has also been taken for JMS Topic.

  Read the article

• Public DNS Server fails on Windows Amazon EC2

  - by Adroidist

  I have started a new Windows server instance on Amazon EC2. The security group has the following rules: Ports Protocol Source 22 tcp 0.0.0.0/0 80 tcp 0.0.0.0/0 443 tcp 0.0.0.0/0 3389 tcp 0.0.0.0/0 53 udp 0.0.0.0/0 -1 icmp 0.0.0.0/0 I am able to ping the public DNS server of the machine and i can connect to it using Windows Remote Desktop connection. However, when i put in my web browser the public DNS server, it fails to connect. Morever, I used filezilla and putty (and in both I loaded the private key .pem) but i receive connection timed out. I disabled the firewall on both my pc and the instance (which I entered using Remote desktop connection). Can you please tell me what I am missing?

  Read the article

• InvalidOperationException when executing SqlCommand with transaction

  - by Serhat Özgel

  I have this code, running parallel in two separate threads. It works fine for a few times, but at some random point it throws InvalidOperationException: The transaction is either not associated with the current connection or has been completed. At the point of exception, I am looking inside the transaction with visual studio and verify its connection is set normally. Also command.Transaction._internalTransaction. _transactionState is set to Active and IsZombied property is set to false. This is a test application and I am using Thread.Sleep for creating longer transactions and causing overlaps. Why may the exception being thrown and what can I do about it? IDbCommand command = new SqlCommand("Select * From INFO"); IDbConnection connection = new SqlConnection(connectionString); command.Connection = connection; IDbTransaction transaction = null; try { connection.Open(); transaction = connection.BeginTransaction(); command.Transaction = transaction; command.ExecuteNonQuery(); // Sometimes throws exception Thread.Sleep(forawhile); // For overlapping transactions running in parallel transaction.Commit(); } catch (ApplicationException exception) { if (transaction != null) { transaction.Rollback(); } } finally { connection.Close(); }

  Read the article

• Make a connection to a HTTPS server from Java and ignore the validity of the security certificate

  - by justinhj

  I've been testing some that works with a bunch of https servers with different keys, some of which are invalid and all of them are not in the local key store for my JVM. I am really only testing things out, so I don't care about the security at this stage. Is there a good way to make POST calls to the server and tell Java not to worry about the security certificates? My google searches for this have brought up some code examples that make a class to do the validation, that always works, but I cannot get it to connect to any of the servers.

  Read the article

• How to establish secure connection between java application and database?

  - by Shashi Bhushan

  Recently, in an interview asked me an question : The communication between our application and that of the remote database must be done with https (more secure). How could you do it? I didn't find any clue for any question in google also.

  Read the article

• How to access a port via OpenVpn only

  - by Andy M

  I've set up an openvpn server alongside an apache website that can only be accessed on port 8100 on the same machine. My /etc/openvpn/server.conf file looks like this: port 1194 proto tcp dev tun ca ./easy-rsa2/keys/ca.crt cert ./easy-rsa2/keys/server.crt key ./easy-rsa2/keys/server.key # This file should be kept secret dh ./easy-rsa2/keys/dh1024.pem # Diffie-Hellman parameter server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt # make sure clients can still connect to the internet push "redirect-gateway def1 bypass-dhcp" keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 Now I tried to let only clients connected to the vpn network access the website on apache via port 8100. So I defined a few iptables rules: #!/bin/sh # My system IP/set ip address of server SERVER_IP="192.168.0.2" # Flushing all rules iptables -F iptables -X # Setting default filter policy iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP # Allow incoming access to port 8100 from OpenVPN 10.8.0.1 iptables -A INPUT -i tun0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o tun0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # outgoing http iptables -A OUTPUT -o tun0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i tun0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT Now when I connect to the server from my client computer and try to access the website on 192.168.0.2:8100, my browser can't open it. Will I have to forward traffic from tun0 to eth0? Or is there anything else I'm missing?

  Read the article

• Why would an ASP.NET site become veeeeeery slow after the network connection dropped?

  - by Joon

  I have an ASP.NET 3.5 site published in IIS 7.5 on Windows Server 2008 R2 64 bit. The pages are accessed over SSL One of our testers has determined that if, during a postback, he blocks network access on his PC, and then after a few seconds reconnects, our site becomes excruciatingly slow. Like 30 seconds per page load. If he hits the refresh button in his browser it stays slow. If he closes the tab, then re-opens it, it becomes fast again. This behavior happens with both IE 8 and the latest firefox. There are no event log entries on the server when this happens My question: - Has anyone seen this same behavior? - Does anyone have a theory as to what causes it?

  Read the article

• For HTTPS, will connection made to different subdomain in page iframe generate warnings?

  - by Erik Hermansen

  If you have a web page served from https://mydumbwebsite.com, and it has an iframe in it that serves from https://subdomain.mydumbwebsite.com, should I expect a significant number of browsers (like 1% of the current browsers in use) to show a security warning? Please don't guess at this. I would like an answer based on real-world experience, if possible.

  Read the article

• i am getting error like mysql_connect() acces denied for system@localhost(using password NO)

  - by user309381

  class MySQLDatabase { public $connection; function _construct() { $this->open_connection();} public function open_connection() {$this->connection = mysql_connect(DB_SERVER,DB_USER,DB_PASS); if(!$this->connection){die("Database Connection Failed" . mysql_error());} else{$db_select = mysql_select_db(DB_NAME,$this->connection); if(!$db_select){die("Database Selection Failed" . mysql_error()); } }} public function close_connection({ if(isset($this->connection)){ mysql_close($this->connection); unset($this->connection);}} public function query(/*$sql*/){ $sql = "SELECT*FROM users where id = 1"; $result = mysql_query($sql); $this->confirm_query($result); //return $result;while( $found_user = mysql_fetch_assoc($result)) { echo $found_user ['username']; } } private function confirm_query($result) { if(!$result) { die("The Query has problem" . mysql_error()); } } } $database = new MySQLDatabase(); $database->open_connection(); $database->query(); $database->close_connection(); ?>

  Read the article

• Why is PHP5 SQLite PDO silently failing on DB connection?

  - by danieltalsky

  I have no idea why my code is failing silently. PDO and PDO SQLite are confirmed loaded. Errors are turned on and OTHER errors display. The SQLite file exists. Perms are set correctly. If I change the filename, PHP actually DOES create the file but still fails silently. No output or commands are excecuted after the "$dbh = new PDO($db_conn);" command. I'm not sure what else I can possibly do to troubleshoot. What else... this is on Modwest shared hosting. ABOUT TO RUN <?php // Destination $db_name = '/confirmed/valid/path/DBName.db3'; $db_conn = 'sqlite:' . $db_name; try { var_dump($db_conn); $dbh = new PDO($db_conn); $dbh->setAttribute(PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION); } catch (Exception $e) { exit("Failed to open database: {$e->getMessage()} \n" ); } ?> THIS NEVER OUTPUTS! sdf

  Read the article

• Apache on Mac Mavericks issue

  - by Michael

  Trying to run Apache so that I can create a testing server on my mac.When I start apache it starts, but it doesn't run (no connection to local host. Ill upload the unix,you'll see that after starting there is no processes, and I did a check to show you what was running on my port 80... I don't entirely know that means. Michaels-MacBook-Pro-3:~ michaelramos$ sudo apachectl start Michaels-MacBook-Pro-3:~ michaelramos$ ps aux | grep httpd michaelramos 348 0.0 0.0 2442000 624 s000 S+ 8:51AM 0:00.00 grep httpd Michaels-MacBook-Pro-3:~ michaelramos$ sudo apachectl start org.apache.httpd: Already loaded Michaels-MacBook-Pro-3:~ michaelramos$ sudo lsof -i ':80' COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME ocspd 96 root 18u IPv4 0x8402f926599c58df 0t0 TCP dhcp-92-67.radford.edu:49267->108.162.232.196:http (ESTABLISHED) ocspd 96 root 20u IPv4 0x8402f926599c58df 0t0 TCP dhcp-92-67.radford.edu:49267->108.162.232.196:http (ESTABLISHED) ocspd 96 root 21u IPv4 0x8402f926599c50f7 0t0 TCP dhcp-92-67.radford.edu:49268->108.162.232.206:http (ESTABLISHED) ocspd 96 root 23u IPv4 0x8402f926599c50f7 0t0 TCP dhcp-92-67.radford.edu:49268->108.162.232.206:http (ESTABLISHED)

  Read the article

• How can I port forward with iptables?

  - by stu

  I want connections coming in on ppp0 on port 8001 to route to 192.168.1.200 on eth0 on port 8080 I've got these two rules -A PREROUTING -p tcp -m tcp --dport 8001 -j DNAT --to-destination 192.168.1.200:8080 -A FORWARD -m state -p tcp -d 192.168.1.200 --dport 8080 --state NEW,ESTABLISHED,RELATED -j ACCEPT and it doesn't work, what am I missing?

  Read the article

• Using Python: How can I telnet into a server and then from that connection telnet into a second serv

  - by Jay B

  I am able to establish the initial telnet session. But from this session I need to create a second. Basically I can not telnet directly to the device I need to access. Interactively this is not an issue but I am attempting to setup an automated test using python. Does anyone know who to accomplish this?

  Read the article

• LXC, Port forwarding and iptables

  - by Roberto Aloi

  I have a LXC container (10.0.3.2) running on a host. A service is running inside the container on port 7000. From the host (10.0.3.1, lxcbr0), I can reach the service: $ telnet 10.0.3.2 7000 Trying 10.0.3.2... Connected to 10.0.3.2. Escape character is '^]'. I'd love to make the service running inside the container accessible to the outer world. Therefore, I want to forward port 7002 on the host to port 7000 on the container: iptables -t nat -A PREROUTING -p tcp --dport 7002 -j DNAT --to 10.0.3.2:7000 Which results in (iptables -t nat -L): DNAT tcp -- anywhere anywhere tcp dpt:afs3-prserver to:10.0.3.2:7000 Still, I cannot access the service from the host using the forwarded port: $ telnet 10.0.3.1 7002 Trying 10.0.3.1... telnet: Unable to connect to remote host: Connection refused I feel like I'm missing something stupid here. What things should I check? What's a good strategy to debug these situations? For completeness, here is how iptables are set on the host: iptables -F iptables -F -t nat iptables -F -t mangle iptables -X iptables -P INPUT DROP iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -t nat -A POSTROUTING -o lxcbr0 -j MASQUERADE iptables -t nat -A PREROUTING -p tcp --dport 7002 -j DNAT --to 10.0.3.2:7000

  Read the article

• Bridging two sockets

  - by Itehnological

  I wondered if it is possible to bridge two incoming tcp sockets. For example: Client A -----> Server <----- Client B The the server sends it's magic to both clients and then they connect to each other bypassing the server Server Client A ----------><---------- Client B UPDATE: The idea is when those clients can't bind to ports to listen to still be able to create connection between each other with the help of the server. For example Client A and Client B have tcp sockets with the server. User A decides to chat with User B and creates a new tcp connection with the server with the request to bridge it with User B. The server sends that request to Client B and it also opens up a new tcp connection with the server for that chat line. Now when the server has both chat connections from A and B it bridges them and they can work without the server, and as a result the server won't have to process all the messages and files the two users share. That's the idea/

  Read the article

• i dont understand error while connecting php and mysql? user denied ? plz help me out to solve. ?

  - by user309381

  class MySQLDatabase { public $connection; function _construct() { $this->open_connection();} public function open_connection() {$this->connection = mysql_connect(DB_SERVER,DB_USER,DB_PASS); if(!$this->connection){die("Database Connection Failed" . mysql_error());} else{$db_select = mysql_select_db(DB_NAME,$this->connection); if(!$db_select){die("Database Selection Failed" . mysql_error()); } }} public function close_connection({ if(isset($this->connection)){ mysql_close($this->connection); unset($this->connection);}} public function query(/*$sql*/){ $sql = "SELECT*FROM users where id = 1"; $result = mysql_query($sql); $this->confirm_query($result); //return $result;while( $found_user = mysql_fetch_assoc($result)) { echo $found_user ['username']; } } private function confirm_query($result) { if(!$result) { die("The Query has problem" . mysql_error()); } } } $database = new MySQLDatabase(); $database->open_connection(); $database->query(); $database->close_connection(); I am getting error like denied for user system@locahost(using password no).i have also other database but it runs fine and i dont also i have set the password after encountered the error what else can do to solve plz help ?

  Read the article

• Windows 7 is blocking ports

  - by Caleb1994

  I am trying to open port 80 and 3690 for HTTP and svnserve respectively. I have Windows Firewall off, and have tried temporarily disabling Mcafee VirusScan Enterprise, to no avail. According to http://www.yougetsignal.com/tools/open-ports/, both ports 80 and 3690 are still blocked. I can't think of what would be blocking them if Windows Firewall and my antivirus are disabled. Here is the output of netsh firewall show state Firewall status: ------------------------------------------------------------------- Profile = Standard Operational mode = Disable Exception mode = Enable Multicast/broadcast response mode = Enable Notification mode = Enable Group policy version = Windows Firewall Remote admin mode = Disable Ports currently open on all network interfaces: Port Protocol Version Program ------------------------------------------------------------------- 3690 TCP Any (null) 22 TCP Any (null) 80 TCP Any (null) 1900 UDP Any (null) 2869 TCP Any (null) Any help? I'm not sure what each item on the list of enabled/disabled items is, but "Operational Mode" is disabled, so I assume that one refers to me disabling Windows Firewall. I know that since Windows Firewall is off, this output might not be useful, but I figured I'd include it just in case, haha.

  Read the article

• Windows 7 is blocking ports

  - by Caleb1994

  I am trying to open port 80 and 3690 for HTTP and svnserve respectively. I have Windows Firewall off, and have tried temporarily disabling Mcafee VirusScan Enterprise, to no avail. According to http://www.yougetsignal.com/tools/open-ports/, both ports 80 and 3690 are still blocked. I can't think of what would be blocking them if Windows Firewall and my antivirus are disabled. Here is the output of netsh firewall show state Firewall status: ------------------------------------------------------------------- Profile = Standard Operational mode = Disable Exception mode = Enable Multicast/broadcast response mode = Enable Notification mode = Enable Group policy version = Windows Firewall Remote admin mode = Disable Ports currently open on all network interfaces: Port Protocol Version Program ------------------------------------------------------------------- 3690 TCP Any (null) 22 TCP Any (null) 80 TCP Any (null) 1900 UDP Any (null) 2869 TCP Any (null) Any help? I'm not sure what each item on the list of enabled/disabled items is, but "Operational Mode" is disabled, so I assume that one refers to me disabling Windows Firewall. I know that since Windows Firewall is off, this output might not be useful, but I figured I'd include it just in case, haha.

  Read the article

• Connecting to SVN server from a computer outside of my LAN

  - by Tom Auger

  I've got a Fedora server running Subversion and svnserve on port 3690. My repo is at /var/svn/project_name. I have my router forwarding port 3690 to the local server (as well as port 80, 21, 22 and a few others). When I connect locally to svn://192.168.0.2/project_name it works great. When I connect from an external server to svn://my.static.ip/project_name I get a time out connecting to the host. However, if I http://my.static.ip there is no problem, so port forwarding is working (at least for port 80). I don't want to run WebDAV or svn via HTTP/s. I'd like it to work using svnserve, as documented in the svn book. What have I misconfigured? EDIT Here is the last part of my iptables dump. I'm not an expert, but it looks OK to me: ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:svn ACCEPT udp -- anywhere anywhere state NEW udp dpt:svn ACCEPT tcp -- anywhere anywhere state NEW tcp dpts:6680:6699 ACCEPT udp -- anywhere anywhere state NEW udp dpts:6680:6699 REJECT all -- anywhere anywhere reject-with icmp-host-prohibited EDIT 2 Results from sudo netstat -tulpn tcp 0 0 0.0.0.0:3690 0.0.0.0:* LISTEN 1455/svnserve

  Read the article

• CentOS 6 - iptables preventing web access via port 80

  - by bsod99

  I'm setting up a new web server with CentOS 6.2 and am not able to connect via the web. Everything looks set up correctly in httpd.conf and Apache is running, so I'm assuming it's an iptables issue. Is there anything in the following which could be causing the issue? # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh REJECT all -- anywhere anywhere reject-with icmp-host-prohibited ACCEPT tcp -- anywhere anywhere tcp dpt:http Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT)

  Read the article

• How can I get started with PHPUnit, where my class construct requires a preconfigured db connection?

  - by Ben Dauphinee

  I have a class that uses a lot of database internally, so I built the constructor with a $db handle that I am supposed to pass to it. I am just getting started with PHPUnit, and I am not sure how I should go ahead and pass the database handle through setup. public function setUp(/*do I pass a database handle through here, using a reference? aka &$db*/){ $this->_acl = new acl; } public function __construct(Zend_Db_Adapter_Abstract $db, $config = array()){

  Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >