Search Results

Search found 14598 results on 584 pages for 'address'.

Page 181/584 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

• SSL and IP addresses on a dedicated server

  - by spike5792

  I've just moved from a shared web hosting server operating on WHM/cPanel running six domains with 1 dedicated IP address. 1 of the 6 domains has an SSL certificate. I have since moved to a dedicated server also with 1 dedicated IP and running cPanel/WHM with the same six domains. I want 1 of the domains to have the SSL certificate but I am being told that it's not possible unless I buy another dedicated IP address. I want to question the hosting provider on this but they haven't really acknowledged it - they've just kept saying that it needs its own IP as the IP I am currently using is shared between my six domains. Does anyone have any experience of this and tell me why my new expensive dedicated hosting provider can't setup SSL using the certificate as I had done before on my shared server?

  Read the article

• how to pass domain name to backend with pound

  - by FurtiveFelon

  I am using pound as a way to decode SSL for the backend, but the bulk of the work is done on varnish (including virtualhost stuff). As a result, I need pound to just forward all other traffic to varnish verbatim, but it doesn't seem to do that. I am using the default configuration: ListenHTTP Address 1.2.3.4 Port 8080 ## allow PUT and DELETE also (by default only GET, POST and HEAD)?: xHTTP 0 Service BackEnd Address 127.0.0.1 Port 80 End End End So whenever I hit example.com:8080, it will always redirect to the default backend for varnish, which i assume was because the domain (host) header isn't send along. Anyone know what could be wrong? Thanks a lot! Jason

  Read the article

• Cisco PIX 515 doesn't seem to be passing traffic through according to static route

  - by Liquidkristal

  Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn't appear to be going anywhere. Now this firewall is deep inside a private network, with an upstream firewall that we don't manage. I have spoken to the people that look after that firewall and they say they they have traffic routing to 10.75.32.21 and 10.75.32.25 and thats it (although there is a website that runs from the server 172.16.102.5 which (if my understanding is correct) gets traffic via 10.75.32.23. Any ideas would be greatly appreciated as to me it should all just work, but its not (obviously if the config is all correct then there could be a problem with the web server that we are trying to access on 10.75.32.25, although the users say that they can get to it internally (172.16.102.8) which is even more confusing) PIX Version 6.3(3) interface ethernet0 auto interface ethernet1 auto interface ethernet2 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 academic security50 fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 195.157.180.168 outsideNET name 195.157.180.170 globalNAT name 195.157.180.174 gateway name 195.157.180.173 Mail-Global name 172.30.31.240 Mail-Local name 10.75.32.20 outsideIF name 82.219.210.17 frogman1 name 212.69.230.79 frogman2 name 78.105.118.9 frogman3 name 172.16.0.0 acadNET name 172.16.100.254 acadIF access-list acl_outside permit icmp any any echo-reply access-list acl_outside permit icmp any any unreachable access-list acl_outside permit icmp any any time-exceeded access-list acl_outside permit tcp any host 10.75.32.22 eq smtp access-list acl_outside permit tcp any host 10.75.32.22 eq 8383 access-list acl_outside permit tcp any host 10.75.32.22 eq 8385 access-list acl_outside permit tcp any host 10.75.32.22 eq 8484 access-list acl_outside permit tcp any host 10.75.32.22 eq 8485 access-list acl_outside permit ip any host 10.75.32.30 access-list acl_outside permit tcp any host 10.75.32.25 eq https access-list acl_outside permit tcp any host 10.75.32.25 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq https access-list acl_outside permit tcp host frogman1 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman2 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman3 host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.23 eq 2001 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp any host 10.75.32.23 eq smtp access-list acl_outside permit tcp any host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.24 eq ssh access-list acl_acad permit icmp any any echo-reply access-list acl_acad permit icmp any any unreachable access-list acl_acad permit icmp any any time-exceeded access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq www access-list acl_acad deny tcp any any eq www access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq https access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq 8080 access-list acl_acad permit tcp host 172.16.102.5 host 10.64.1.115 eq smtp pager lines 24 logging console debugging mtu outside 1500 mtu inside 1500 mtu academic 1500 ip address outside outsideIF 255.255.252.0 no ip address inside ip address academic acadIF 255.255.0.0 ip audit info action alarm ip audit attack action alarm pdm history enable arp timeout 14400 global (outside) 1 10.75.32.21 nat (academic) 1 acadNET 255.255.0.0 0 0 static (academic,outside) 10.75.32.22 Mail-Local netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.30 172.30.30.36 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.23 172.16.102.5 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.24 172.16.102.6 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.25 172.16.102.8 netmask 255.255.255.255 0 0 access-group acl_outside in interface outside access-group acl_acad in interface academic route outside 0.0.0.0 0.0.0.0 10.75.32.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local snmp-server host outside 172.31.10.153 snmp-server host outside 172.31.10.154 snmp-server host outside 172.31.10.155 no snmp-server location no snmp-server contact snmp-server community CPQ_HHS no snmp-server enable traps floodguard enable telnet 172.30.31.0 255.255.255.0 academic telnet timeout 5 ssh timeout 5 console timeout 0 terminal width 120 Cryptochecksum:hi2u : end PIX515#

  Read the article

• Hosting a site on amazon ec2

  - by Khalid Mushtaq

  I have recently bought an amazon ec2 instance. Now I want to host a website. I have googled and found some useful info but there is some confusion in my mind. Suppose domain name is "http://www.example.com" That's what I have done so far. I have configured my domain locally on amazon ec2 instance and it's working fine when I open that url in amazon ec2 instance's browser. I have used http://www.example.com in /etc/hosts file point it to 127.0.0.1 to open locally on instance. I have got one elastic ip address and associated it with the instance. I have changed http://www.example.com A's record with the elastic IP that I have got in above step. Now what should I do? When some user will open my website anywhere in the world, will it get pointed to my instanace's ip address? Have I done proper configurations for website on instance?

  Read the article

• Changed file and now I cannot access my SSH anymore

  - by Arnold

  I was trying to get my dedicated server to have a couple of VPS's installed using this tutorial: http://linux-vserver.org/Installation_on_CentOS In the process I had to change a file: /etc/ssh/sshd_config The documentation advises to change it into: ListenAddress <host IP address> Guess what? I literally added <host IP address> instead of the dedicated servers IP. I restarted the server and now I'm not able to access my SSH anymore. Can anyone help me to gain access to my SSH again? I'm using CentOS 6.

  Read the article

• Getting Pango-WARNING: Invalid UTF-8 string passed to pango_layout_set_text()

  - by geerlingguy

  About three days ago, I noticed the exim mailqueue started filling up on one of my servers, and upon inspecting some of the emails using # exim -Mvb $ID, I noticed they were being sent to some system email address (which is not a real address), and the body of the messages were as follows: (process:8259): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text() I'm wondering what could be causing this strange issue, as I've never heard of 'pango' at all... I've never seen that function used in my lifetime! It seems the process id (PID) is for an apache process, though, as the pids are always gone by the time I use # ps -aux to look them up. Edit: Whoops! Forgot to include the subject - looks like it's actually munin-cron that's bringing up the issue: Subject: Cron /usr/bin/munin-cron --force-root

  Read the article

• How can I use domain masking without having self referral in Google Analytics

  - by Cdore

  I have one old domain that points to a website's server's ip (let's call it www.oldsite.com). I have a new one, www.newsite.com, that is set up to be forwarded to a specific page on the website. Due to the way the host of newsite.com places the website in a frame, in Google Analystics, the newsite.com is listed as a source rather than the source they were at before hand, causing a self referral. A solution is to edit the code of the iframe as I looked up, but there's no way to really edit the host's masking source code of course. Another solution I did previously was have www.newsite.com point to the address that www.oldsite.come pointed to. It solved the analytics problems, but in exchange, the url masking no longer worked. In the address bar, it came up as www.oldsite.com. Is there a way to make me have url masking and be able to forward to agree with google analytics? The server of the website is hosted on a cloud server, if this is anymore information.

  Read the article

• Windows file sharing connects over WiFi instead of LAN

  - by zacaj

  I have a laptop and a desktop computer, and I need to sync lots of files to the laptop and back whenever I go on a trip, etc. I've got a LAN cable connected into an extra port on the desktop that I plug into the laptop so I can get gigabit file transfers instead of wireless G. They connect fine. If I do an FTP transfer, for instance, using the LAN IP addresses, it goes at ~40MB/s, as it should. However when I copy files using explorer and native windows file sharing it detects the other computer by name, not IP (eg \\DESKTOP-PC\ instead of \\192.168.0.100\) and always connects to it by its wireless IP address instead of the faster LAN address. Both computers are running Windows 7. I have tried editing the priorities of the adapters in Advanced Settings and putting the LAN adapters above the wifi ones, but this didn't have any effect

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• Outlook errors w/Craigslist and others

  - by user6202

  Vista Home Basic and Outlook 2007 are all updated and repaired. When attempying to mailto: in CL, etc. by clicking on the users address, I get error 'can't open outlook'. If outlook is open, nothing ever happens. If I right click for gmail the address goes in the wrong field. I didnt notice right away but this happened after an auto update. Help! Thanks in advance. Dave

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• How to get httpd to forward to multiple tomcats for different urls, including / ?

  - by Nick Foote

  Ok So I've got multiple tomcat instances setup on several AJP ports, I also have Apache httpd listening on port 8090 (cos I've got another app already using 8080 at the moment). I've successfully mapped urls such as mydomain.com:8090/demo and mydomain.com:8090/preprod to their respective tomcat instances using Jk Mount and the following vhosts config; <VirtualHost *:8090> JkMount /preprod* preprod JkMount /demo* demo </VirtualHost> But I also want the "root" address to map to another tomcat instance, what will become live/production, ie I want mydomain.com:8090/ to map a 3rd tomcat instance. At the moment nothing happens or changes if I just add to the above config a line; JkMount /* rootwar if I browse to mydomain.com:8090 I just get the same boring apache httpd landing page letting me know its running (ie index.html in httpd/htdocs) Is it possible to use JkMount to redirect the "root" address stuff to a tomcat instance? I can see that a rule like /* will also match URLs like mydomain.com/preprod but I was hoping the rules are applied in order so if /* appears at the end it effectively would be a "if its not one of the other environments, then direct to root/production" Just to be clear I'm trying to setup the following; mydomain.com:8090/preprod --> myApp running in tomcat1 mydomain.com:8090/demo --> myApp running in tomcat2 mydomain.com:8090 --> myApp running in tomcat3

  Read the article

• The best way to have a pointer to several methods - critique requested

  - by user827992

  I'm starting with a short introduction of what i know from the C language: a pointer is a type that stores an adress or a NULL the * operator reads the left value of the variable on its right and use this value as address and reads the value of the variable at that address the & operator generate a pointer to the variable on its right so i was thinking that in C++ the pointers can work this way too, but i was wrong, to generate a pointer to a static method i have to do this: #include <iostream> class Foo{ public: static void dummy(void){ std::cout << "I'm dummy" << std::endl; }; }; int main(){ void (*p)(); p = Foo::dummy; // step 1 p(); p = &(Foo::dummy); // step 2 p(); p = Foo; // step 3 p->dummy(); return(0); } now i have several questions: why step 1 works why step 2 works too, looks like a "pointer to pointer" for p to me, very different from step 1 why step 3 is the only one that doesn't work and is the only one that makes some sort of sense to me, honestly how can i write an array of pointers or a pointer to pointers structure to store methods ( static or non-static from real objects ) what is the best syntax and coding style for generating a pointer to a method?

  Read the article

• setting up a WGR614v7 behind a linux box

  - by commodore fancypants

  Here's the setup, I have an openSUSE box with 2 NICs, one goes to my home network router, the other has DHCP running and it attached to a wireless router. I'm trying to get this setup to work before I switch to the linux box as my home network router. My DHCP will offer the wireless router (a WGR614v7) an address, but anything that connects to the wireless router ends up with a APIPA address. I have all the firewalls on the wireless network turned off as well as the wireless router's own DHCP. The linux box isn't offering addresses to anything past the wireless router. Is this a problem with the router or my DHCP setup? For testing purposes, I have both NICs set in the internal zone and I've tried wireless and wired connections to the WGR614v7 both to no avail.

  Read the article

• Exchange mail users cannot send to certain lists

  - by blsub6

  First of all, everyone's on Exchange 2010 using OWA I have a dynamic distribution list that contains all users in my domain called 'staff'. I can send to this list, other people can send to this list, but I have one user that cannot send to this list. Sending to this list gives the user an email back with the error: Delivery has failed to these recipients or groups: Staff The e-mail address you entered couldn't be found. Please check the recipient's e-mail address and try to resend the message. If the problem continues, please contact your helpdesk. and then a bunch of diagnostic information that I don't want to paste here because I don't want to have to censor all of the sensitive information contained (lazy) Can you guys throw me some possible reasons why this would happen? If there are an innumerable number of reasons, where should I start to troubleshoot this? EDIT One Exchange server inside the network that acts as a transport server, client access server and mailbox server and one Edge Transport server in the DMZ.

  Read the article

• Deliver email to Gmail AND Office 365?

  - by gbegley

  We moved our Office app hosting from Google Apps to Office 365. Many of us miss Google Apps, especially its superior search functionality. The pressure to use Office 365 has disappeared; many (but not all) of us would like to go back to Google Apps. Is it possible to configure our domain's mail delivery so that messages are delivered to both Google Apps's Gmail and Office 365, allowing users to choose which platform they prefer? If so, what are the options? Google Apps documentation specifies the ability to deliver messages to a secondary mail server using routing configuration. Currently our MX records are point to Office 365. If I change the MX records to point to Google Apps Mails servers, is the "Office 365 MX record address" the address I would want to use for a Google Apps Routing Target?

  Read the article

• My D-Link Router is only allowing one connection

  - by Blaze

  My Router (Model: DI-624) is only allowing one wireless connection to one laptop. The other laptop is stuck hanging at connecting to the Internet I have the SSID set as "Pedro-Home" and is using a WPA PSK secured password. I have set the router using "Blaze-PC" while wired. Both Laptops critically need the Internet. > Dynamic DHCP Client List > > Host Name IP Address MAC > Address Expired Time > Blaze-PC 192.168.0.100 70-f1-a1-ff-39-a8 Apr/21/2011 17:49:14 > pedro 192.168.0.105 00-26-82-c8-47-25 Apr/21/2011 17:50:05 <<This computer isn't connecting.

  Read the article

• Troubleshoot telnet connection from Windows 7 to UNIX

  - by Sujay Ghosh

  I am trying to connect to an Asterisk server in USA. I am using telnet < IP Address 5038 from India to USA. The person in USA is able to telnet to the IP address and port from USA , but I am not able to do it from India. We are on different networks. I am using Windows 7 Ultimate, and have enabled the Telnet client. I have also used Putty without any success. Can someone suggest me what can be the problem and how can this be resolved.

  Read the article

• DHCP for Multiple Subnets

  - by TheD

  So this is the current setup - essentially I would like to get my DHCP server, serving DHCP requests for two seperate subnets. Netgear DG834G acting as a modem connected to a Sonicwall Pro 2040. X0 - LAN - 192.168.1.0/24 X1 - WAN - <WAN-IP> X2 - WLAN - 192.168.10.0/24 At the moment, I have a 2008R2 server with DHCP installed, with an IP address on the 192.168.1.0/24 range handling DHCP fine for this subnet. The Sonicwall is configured correctly - anything connected to the WLAN has Full Allow to anything in the LAN, and vice versa but it will not lease an IP from my Server. I've also added another IP address to the server, so the physical NIC now has two IP's: 192.168.1.2 and 192.168.10.2 with a DHCP scope configured for each. Still no luck! Any ideas? Thanks!

  Read the article

• Need help completing this Powershell script with some Exchange 2010 commands.

  - by Pure.Krome

  Hi folks. the following powershell script lists all the email aliases I have for a single mailbox. >$mbx = Get-Mailbox myuser >$mbx.EmailAddresses and that lists all the addresses. eg. SmtpAddress : [email protected] AddressString : [email protected] ProxyAddressString : smtp:[email protected] Prefix : SMTP IsPrimaryAddress : False PrefixString : smtp SmtpAddress : [email protected] AddressString : [email protected] ProxyAddressString : smtp:[email protected] Prefix : SMTP IsPrimaryAddress : False PrefixString : smtp SmtpAddress : [email protected] AddressString : [email protected] ProxyAddressString : SMTP:[email protected] Prefix : SMTP IsPrimaryAddress : True PrefixString : SMTP Now to add a new email address, I do the following poweshell command :- $mbx.EmailAddresses += "myEmailAddress.com" $mbx | Set-Mailbox So i'm not sure how i can use the foreach to remove each address? I tried:- @mbx.EmailAddresses | foreach { $mbx.EmailAddresses -= $._SmtpAddress } and that failed miserably. That's my first attempt of PS script, ever :P Can anyone help?

  Read the article

• foobar.com working, but www.foobar.com not working?

  - by dpmattingly

  I am setting up a web site for a client. She is using GoDaddy for domain registration, and a hosting company I have never used before. After setting up the nameservers on GoDaddy's side, the address foobar.com (for example) is correctly directing to the new site. However, the address www.foobar.com is redirecting to a 404 page on the hosting company's side. I've been dealing with customer service on the hosting side, and they have told me various things including wait for DNS propagation (which has obviously happened since the 404 page is on their side), and to make sure that the nameservers on GoDaddy's side were entered in lower case instead of upper case (which I know doesn't matter since nameservers are case insensitive). I think I'm getting the runaround from the hosting company, but the client had signed up with them before I came to the project, so if possible I'd like to resolve this issue with them before we start treating it as a loss. Does anybody know what could cause foobar.com to resolve correctly but www.foobar.com to not resolve? How would I best be able to suggest a fix to this through the technical support channels of a hosting company?

  Read the article

• Traffic shaping & monthly traffic limit in Tomato?

  - by Matt H

  Is there a way to do a monthly traffic limit in Tomato, DDWRT or OpenWRT in addition to the regular QoS? This is for a house with several students sharing the internet. I.e. for a specific IP address, IP Range or MAC address, the firmware will count the download traffic for that month. When a configurable limit is set, it'll either limit it to say 64kbit/s up/down or drop all traffic and maybe redirect web traffic to an internal web server telling them that they have exceeded their quota. How can this be done with those firmwares?

  Read the article

• Spotlight on GlassFish 4.1: #7 WebSocket Session Throttling and JMX Monitoring

  - by delabassee

  'Spotlight on GlassFish 4.1' is a series of posts that highlights specific enhancements of the upcoming GlassFish 4.1 release. It could be a new feature, a fix, a behavior change, a tip, etc. #7 WebSocket Session Throttling and JMX Monitoring GlassFish 4.1 embeds Tyrus 1.8.1 which is compliant with the Maintenance Release of JSR 356 ("WebSocket API 1.1"). This release also brings brings additional features to the WebSocket support in GlassFish. JMX Monitoring: Tyrus now exposes WebSocket metrics through JMX . In GF 4.1, the following message statistics are monitored for both sent and received messages: messages count messages count per second average message size smallest message size largest message size Those statistics are collected independently of the message type (global count) and per specific message type (text, binary and control message). In GF 4.1, Tyrus also monitors, and exposes through JMX, errors at the application and endpoint level. For more information, please check Tyrus JMX Monitoring Session Throttling To preserve resources on the server hosting websocket endpoints, Tyrus now offers ways to limit the number of open sessions. Those limits can be configured at different level: per whole application per endpoint per remote endpoint address (client IP address)   For more details, check Tyrus Session Throttling. The next entry will focus on Tyrus new clients-side features.

  Read the article

• Mac | Port Forwarding for Remote Desktop

  - by Vaibhav Bajpai

  I have two Mac notebooks at home, I have assigned them static private IPs. I have also set my router to a DynDNS address, which updates everytime my router gets a new public IP. I have enabled Screen Sharing on both notebooks. I can successfully goto my router webpage using the DynDNS address. I understand I need to port-forward to get Screen Sharing to work from outside. Lets assume, notebooks have private IP 192.168.1.2 and 192.168.1.3 I am kind of lost here, would appreciate some help (I need to be able remote desktop to both notebooks)

  Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >