Search Results

Search found 8563 results on 343 pages for 'routed events'.

Page 181/343 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

• Network Misconfiguration when adding first host to new vSphere cluster

  - by dunxd

  I am building a new vSphere cluster from scratch. I have installed ESXi on the first host, and built a vCenter server on a VM residing on that host (storage is on the local hard drive, although we have iSCSI targets which I can reach from the host). The cluster is configured for HA. When I try and add the host to the cluster, I get an error at the point where HA is configured - Cannot complete the . I have stripped the network configuration of the host down to the most basic - a single NIC attached to a single vSwitch - this is running the VMKernel Port on VLAN 8 - that is our Management VLAN. The vCenter server will have a network address on this VLAN, so I also set the initial Virtual Machine Port Group to this VLAN, and connected the vCenter server NIC to this port group. I understand I can't connect the vCenter server to the VMkernel port group, but shouldn't I be able to connect the vCenter server to a Port Group in the same VLAN? If not, do I need to create a VLAN specifically for VMKernel Port Group? I plan to set up another port group for vMotion with a dedicated and isolated VLAN (i.e. VLAN isn't routed) so this wouldn't allow vCenter to communicate. Does anyone have any suggestions, or other ideas for what might be causing the problem. I've read through the documentation, but it isn't giving me any pointers, and the error message isn't helping me beyond telling me something is wrong with my network config.

  Read the article

• (Zywall USG 300) NAT bypassed when accessing in-house-server From LAN Via domain name

  - by mschr

  My situations is like this; i host a number of websites from within our joint network solution. On the network is basically 3 categories: the known public, registered via mac, given static dhcp lease the anonymous lan connections, given lease from specific dhcp range switches, unix hosts firewall Now, consider following hosts which are of interest 111.111.111.111 (Zywall USG 300 WAN) 192.168.1.1 (ZyWall USG 300 LAN) load balances and bw monitors plus handles NAT 192.168.1.2 (Linux www) serves mydomain1.tld and mydomain2.tld 192.168.123.123 (Random LAN client) accesses mydomain1.tld from LAN 23.234.12.253 (Random External client) accesses mydomain1.tld via WAN DNS A records are setup so that both mydomain1.tld and mydomain2.tld points to 111.111.111.111 - and the Linux www serves the http parts with VirtualHost configurations, setting up the document roots pr ServerName, this is not so interesting though.. NAT rule translates 111.111.111.111:80 to 192.168.1.2:80 (1:1 NAT) Our problem follows; When accessing http://mydomain1.tld from outside (23.234.12.253 example host) the joint network - everything is fine, zywall receives requests via port 80 and maps it to the linux host' httpd. However - once trying to go through the NAT from LAN side (in-house, 192.168.123.123 example host) then one gets filtered in the Zywall port 80 firewall. I know this only because port 443 is open for administration interface and https://mydomain1.tld prompts for zywall login. So my conclusion is, that the LAN that accesses 111.111.111.111 in fact are routed to 192.168.1.1 whilst bypassing the NAT table. I need to know how to setup NAT / Policy Route, so that LAN WAN LAN will function with proper network translations instead of doing the 'quick nameserver lookup' or whatever this might be.

  Read the article

• Windows keyboard macro playback software?

  - by WilliamKF

  Many years ago, I had a product called Quickeys for the Macintosh that allowed me to record keyboard and mouse events and create a macro that could be assigned to a keyboard accelerator. This was a really useful tool, but I haven't seen anything like it ever on Microsoft Windows OS platform. Does such a product exist?

  Read the article

• Monitor open files limits, etc

  - by marcog

  We've been hitting the max open files limit on a few services recently. There are also a bunch of other limits in place. Is there a way to monitor how close processes are to these limits so we can be alerted when it's time to either up the limits or fix the root cause? On the same note, is it possible to view a log of these events so we know when a crash occurs it's because of hitting one of these limits?

  Read the article

• Where is all the memory being consumed?

  - by Mark L

  Hello, I have a Dell R300 Ubuntu 9.10 box with 4GB of memory. All I'm running on there is haproxy, nagios and postfix yet there is ~2.7GB of memory being consumed. I've run ps and I can't get the sums to add up. Could anyone shed any light on where all the memory is being used? Cheers, Mark $ sudo free -m total used free shared buffers cached Mem: 3957 2746 1211 0 169 2320 -/+ buffers/cache: 256 3701 Swap: 6212 0 6212 Sorry for pasting all of ps' output but I'm keen to get to the bottom of this. $ sudo ps aux [sudo] password for mark: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 19320 1656 ? Ss May20 0:05 /sbin/init root 2 0.0 0.0 0 0 ? S< May20 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S< May20 0:00 [migration/0] root 4 0.0 0.0 0 0 ? S< May20 0:16 [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S< May20 0:00 [watchdog/0] root 6 0.0 0.0 0 0 ? S< May20 0:03 [migration/1] root 7 0.0 0.0 0 0 ? S< May20 3:10 [ksoftirqd/1] root 8 0.0 0.0 0 0 ? S< May20 0:00 [watchdog/1] root 9 0.0 0.0 0 0 ? S< May20 0:00 [migration/2] root 10 0.0 0.0 0 0 ? S< May20 0:19 [ksoftirqd/2] root 11 0.0 0.0 0 0 ? S< May20 0:00 [watchdog/2] root 12 0.0 0.0 0 0 ? S< May20 0:01 [migration/3] root 13 0.0 0.0 0 0 ? S< May20 0:41 [ksoftirqd/3] root 14 0.0 0.0 0 0 ? S< May20 0:00 [watchdog/3] root 15 0.0 0.0 0 0 ? S< May20 0:03 [events/0] root 16 0.0 0.0 0 0 ? S< May20 0:10 [events/1] root 17 0.0 0.0 0 0 ? S< May20 0:08 [events/2] root 18 0.0 0.0 0 0 ? S< May20 0:08 [events/3] root 19 0.0 0.0 0 0 ? S< May20 0:00 [cpuset] root 20 0.0 0.0 0 0 ? S< May20 0:00 [khelper] root 21 0.0 0.0 0 0 ? S< May20 0:00 [netns] root 22 0.0 0.0 0 0 ? S< May20 0:00 [async/mgr] root 23 0.0 0.0 0 0 ? S< May20 0:00 [kintegrityd/0] root 24 0.0 0.0 0 0 ? S< May20 0:00 [kintegrityd/1] root 25 0.0 0.0 0 0 ? S< May20 0:00 [kintegrityd/2] root 26 0.0 0.0 0 0 ? S< May20 0:00 [kintegrityd/3] root 27 0.0 0.0 0 0 ? S< May20 0:00 [kblockd/0] root 28 0.0 0.0 0 0 ? S< May20 0:01 [kblockd/1] root 29 0.0 0.0 0 0 ? S< May20 0:04 [kblockd/2] root 30 0.0 0.0 0 0 ? S< May20 0:02 [kblockd/3] root 31 0.0 0.0 0 0 ? S< May20 0:00 [kacpid] root 32 0.0 0.0 0 0 ? S< May20 0:00 [kacpi_notify] root 33 0.0 0.0 0 0 ? S< May20 0:00 [kacpi_hotplug] root 34 0.0 0.0 0 0 ? S< May20 0:00 [ata/0] root 35 0.0 0.0 0 0 ? S< May20 0:00 [ata/1] root 36 0.0 0.0 0 0 ? S< May20 0:00 [ata/2] root 37 0.0 0.0 0 0 ? S< May20 0:00 [ata/3] root 38 0.0 0.0 0 0 ? S< May20 0:00 [ata_aux] root 39 0.0 0.0 0 0 ? S< May20 0:00 [ksuspend_usbd] root 40 0.0 0.0 0 0 ? S< May20 0:00 [khubd] root 41 0.0 0.0 0 0 ? S< May20 0:00 [kseriod] root 42 0.0 0.0 0 0 ? S< May20 0:00 [kmmcd] root 43 0.0 0.0 0 0 ? S< May20 0:00 [bluetooth] root 44 0.0 0.0 0 0 ? S May20 0:00 [khungtaskd] root 45 0.0 0.0 0 0 ? S May20 0:00 [pdflush] root 46 0.0 0.0 0 0 ? S May20 0:09 [pdflush] root 47 0.0 0.0 0 0 ? S< May20 0:00 [kswapd0] root 48 0.0 0.0 0 0 ? S< May20 0:00 [aio/0] root 49 0.0 0.0 0 0 ? S< May20 0:00 [aio/1] root 50 0.0 0.0 0 0 ? S< May20 0:00 [aio/2] root 51 0.0 0.0 0 0 ? S< May20 0:00 [aio/3] root 52 0.0 0.0 0 0 ? S< May20 0:00 [ecryptfs-kthrea] root 53 0.0 0.0 0 0 ? S< May20 0:00 [crypto/0] root 54 0.0 0.0 0 0 ? S< May20 0:00 [crypto/1] root 55 0.0 0.0 0 0 ? S< May20 0:00 [crypto/2] root 56 0.0 0.0 0 0 ? S< May20 0:00 [crypto/3] root 70 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_0] root 71 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_1] root 74 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_2] root 75 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_3] root 82 0.0 0.0 0 0 ? S< May20 0:00 [kstriped] root 83 0.0 0.0 0 0 ? S< May20 0:00 [kmpathd/0] root 84 0.0 0.0 0 0 ? S< May20 0:00 [kmpathd/1] root 85 0.0 0.0 0 0 ? S< May20 0:00 [kmpathd/2] root 86 0.0 0.0 0 0 ? S< May20 0:00 [kmpathd/3] root 87 0.0 0.0 0 0 ? S< May20 0:00 [kmpath_handlerd] root 88 0.0 0.0 0 0 ? S< May20 0:00 [ksnapd] root 89 0.0 0.0 0 0 ? S< May20 0:00 [kondemand/0] root 90 0.0 0.0 0 0 ? S< May20 0:00 [kondemand/1] root 91 0.0 0.0 0 0 ? S< May20 0:00 [kondemand/2] root 92 0.0 0.0 0 0 ? S< May20 0:00 [kondemand/3] root 93 0.0 0.0 0 0 ? S< May20 0:00 [kconservative/0] root 94 0.0 0.0 0 0 ? S< May20 0:00 [kconservative/1] root 95 0.0 0.0 0 0 ? S< May20 0:00 [kconservative/2] root 96 0.0 0.0 0 0 ? S< May20 0:00 [kconservative/3] root 97 0.0 0.0 0 0 ? S< May20 0:00 [krfcommd] root 315 0.0 0.0 0 0 ? S< May20 0:09 [mpt_poll_0] root 317 0.0 0.0 0 0 ? S< May20 0:00 [mpt/0] root 547 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_4] root 587 0.0 0.0 0 0 ? S< May20 0:11 [kjournald2] root 636 0.0 0.0 12748 860 ? S May20 0:00 upstart-udev-bridge --daemon root 657 0.0 0.0 17064 924 ? S<s May20 0:00 udevd --daemon root 666 0.0 0.0 8192 612 ? Ss May20 0:00 dd bs=1 if=/proc/kmsg of=/var/run/rsyslog/kmsg root 774 0.0 0.0 17060 888 ? S< May20 0:00 udevd --daemon root 775 0.0 0.0 17060 888 ? S< May20 0:00 udevd --daemon syslog 825 0.0 0.0 191696 1988 ? Sl May20 0:31 rsyslogd -c4 root 839 0.0 0.0 0 0 ? S< May20 0:00 [edac-poller] root 870 0.0 0.0 0 0 ? S< May20 0:00 [kpsmoused] root 1006 0.0 0.0 5988 604 tty4 Ss+ May20 0:00 /sbin/getty -8 38400 tty4 root 1008 0.0 0.0 5988 604 tty5 Ss+ May20 0:00 /sbin/getty -8 38400 tty5 root 1015 0.0 0.0 5988 604 tty2 Ss+ May20 0:00 /sbin/getty -8 38400 tty2 root 1016 0.0 0.0 5988 608 tty3 Ss+ May20 0:00 /sbin/getty -8 38400 tty3 root 1018 0.0 0.0 5988 604 tty6 Ss+ May20 0:00 /sbin/getty -8 38400 tty6 daemon 1025 0.0 0.0 16512 472 ? Ss May20 0:00 atd root 1026 0.0 0.0 18708 1000 ? Ss May20 0:03 cron root 1052 0.0 0.0 49072 1252 ? Ss May20 0:25 /usr/sbin/sshd root 1084 0.0 0.0 5988 604 tty1 Ss+ May20 0:00 /sbin/getty -8 38400 tty1 root 6320 0.0 0.0 19440 956 ? Ss May21 0:00 /usr/sbin/xinetd -pidfile /var/run/xinetd.pid -stayalive -inetd_compat -inetd_ipv6 nagios 8197 0.0 0.0 27452 1696 ? SNs May21 2:57 /usr/sbin/nagios3 -d /etc/nagios3/nagios.cfg root 10882 0.1 0.0 70280 3104 ? Ss 10:30 0:00 sshd: mark [priv] mark 10934 0.0 0.0 70432 1776 ? S 10:30 0:00 sshd: mark@pts/0 mark 10935 1.4 0.1 21572 4336 pts/0 Ss 10:30 0:00 -bash root 10953 1.0 0.0 15164 1136 pts/0 R+ 10:30 0:00 ps aux haproxy 12738 0.0 0.0 17208 992 ? Ss Jun08 0:49 /usr/sbin/haproxy -f /etc/haproxy/haproxy.cfg root 23953 0.0 0.0 37012 2192 ? Ss Jun04 0:03 /usr/lib/postfix/master postfix 23955 0.0 0.0 39232 2356 ? S Jun04 0:00 qmgr -l -t fifo -u postfix 32603 0.0 0.0 39072 2132 ? S 09:05 0:00 pickup -l -t fifo -u -c Here's meminfo: $ cat /proc/meminfo MemTotal: 4052852 kB MemFree: 1240488 kB Buffers: 173172 kB Cached: 2376420 kB SwapCached: 0 kB Active: 1479288 kB Inactive: 1081876 kB Active(anon): 11792 kB Inactive(anon): 0 kB Active(file): 1467496 kB Inactive(file): 1081876 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 6361700 kB SwapFree: 6361700 kB Dirty: 44 kB Writeback: 0 kB AnonPages: 11568 kB Mapped: 5844 kB Slab: 155032 kB SReclaimable: 145804 kB SUnreclaim: 9228 kB PageTables: 1592 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 8388124 kB Committed_AS: 51732 kB VmallocTotal: 34359738367 kB VmallocUsed: 282604 kB VmallocChunk: 34359453499 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 6784 kB DirectMap2M: 4182016 kB Here's slabinfo: $ cat /proc/slabinfo slabinfo - version: 2.1 # name <active_objs> <num_objs> <objsize> <objperslab> <pagesperslab> : tunables <limit> <batchcount> <sharedfactor> : slabdata <active_slabs> <num_slabs> <sharedavail> ip6_dst_cache 50 50 320 25 2 : tunables 0 0 0 : slabdata 2 2 0 UDPLITEv6 0 0 960 17 4 : tunables 0 0 0 : slabdata 0 0 0 UDPv6 68 68 960 17 4 : tunables 0 0 0 : slabdata 4 4 0 tw_sock_TCPv6 0 0 320 25 2 : tunables 0 0 0 : slabdata 0 0 0 TCPv6 72 72 1792 18 8 : tunables 0 0 0 : slabdata 4 4 0 dm_raid1_read_record 0 0 1064 30 8 : tunables 0 0 0 : slabdata 0 0 0 kcopyd_job 0 0 368 22 2 : tunables 0 0 0 : slabdata 0 0 0 dm_uevent 0 0 2608 12 8 : tunables 0 0 0 : slabdata 0 0 0 dm_rq_target_io 0 0 376 21 2 : tunables 0 0 0 : slabdata 0 0 0 uhci_urb_priv 0 0 56 73 1 : tunables 0 0 0 : slabdata 0 0 0 cfq_queue 0 0 168 24 1 : tunables 0 0 0 : slabdata 0 0 0 mqueue_inode_cache 18 18 896 18 4 : tunables 0 0 0 : slabdata 1 1 0 fuse_request 0 0 632 25 4 : tunables 0 0 0 : slabdata 0 0 0 fuse_inode 0 0 768 21 4 : tunables 0 0 0 : slabdata 0 0 0 ecryptfs_inode_cache 0 0 1024 16 4 : tunables 0 0 0 : slabdata 0 0 0 hugetlbfs_inode_cache 26 26 608 26 4 : tunables 0 0 0 : slabdata 1 1 0 journal_handle 680 680 24 170 1 : tunables 0 0 0 : slabdata 4 4 0 journal_head 144 144 112 36 1 : tunables 0 0 0 : slabdata 4 4 0 revoke_table 256 256 16 256 1 : tunables 0 0 0 : slabdata 1 1 0 revoke_record 512 512 32 128 1 : tunables 0 0 0 : slabdata 4 4 0 ext4_inode_cache 53306 53424 888 18 4 : tunables 0 0 0 : slabdata 2968 2968 0 ext4_free_block_extents 292 292 56 73 1 : tunables 0 0 0 : slabdata 4 4 0 ext4_alloc_context 112 112 144 28 1 : tunables 0 0 0 : slabdata 4 4 0 ext4_prealloc_space 156 156 104 39 1 : tunables 0 0 0 : slabdata 4 4 0 ext4_system_zone 0 0 40 102 1 : tunables 0 0 0 : slabdata 0 0 0 ext2_inode_cache 0 0 776 21 4 : tunables 0 0 0 : slabdata 0 0 0 ext3_inode_cache 0 0 784 20 4 : tunables 0 0 0 : slabdata 0 0 0 ext3_xattr 0 0 88 46 1 : tunables 0 0 0 : slabdata 0 0 0 dquot 0 0 256 16 1 : tunables 0 0 0 : slabdata 0 0 0 shmem_inode_cache 606 620 800 20 4 : tunables 0 0 0 : slabdata 31 31 0 pid_namespace 0 0 2112 15 8 : tunables 0 0 0 : slabdata 0 0 0 UDP-Lite 0 0 832 19 4 : tunables 0 0 0 : slabdata 0 0 0 RAW 183 210 768 21 4 : tunables 0 0 0 : slabdata 10 10 0 UDP 76 76 832 19 4 : tunables 0 0 0 : slabdata 4 4 0 tw_sock_TCP 80 80 256 16 1 : tunables 0 0 0 : slabdata 5 5 0 TCP 81 114 1664 19 8 : tunables 0 0 0 : slabdata 6 6 0 blkdev_integrity 144 144 112 36 1 : tunables 0 0 0 : slabdata 4 4 0 blkdev_queue 64 64 2024 16 8 : tunables 0 0 0 : slabdata 4 4 0 blkdev_requests 120 120 336 24 2 : tunables 0 0 0 : slabdata 5 5 0 fsnotify_event 156 156 104 39 1 : tunables 0 0 0 : slabdata 4 4 0 bip-256 7 7 4224 7 8 : tunables 0 0 0 : slabdata 1 1 0 bip-128 0 0 2176 15 8 : tunables 0 0 0 : slabdata 0 0 0 bip-64 0 0 1152 28 8 : tunables 0 0 0 : slabdata 0 0 0 bip-16 84 84 384 21 2 : tunables 0 0 0 : slabdata 4 4 0 sock_inode_cache 224 276 704 23 4 : tunables 0 0 0 : slabdata 12 12 0 file_lock_cache 88 88 184 22 1 : tunables 0 0 0 : slabdata 4 4 0 net_namespace 0 0 1920 17 8 : tunables 0 0 0 : slabdata 0 0 0 Acpi-ParseExt 640 672 72 56 1 : tunables 0 0 0 : slabdata 12 12 0 taskstats 48 48 328 24 2 : tunables 0 0 0 : slabdata 2 2 0 proc_inode_cache 1613 1750 640 25 4 : tunables 0 0 0 : slabdata 70 70 0 sigqueue 100 100 160 25 1 : tunables 0 0 0 : slabdata 4 4 0 radix_tree_node 22443 22475 560 29 4 : tunables 0 0 0 : slabdata 775 775 0 bdev_cache 72 72 896 18 4 : tunables 0 0 0 : slabdata 4 4 0 sysfs_dir_cache 9866 9894 80 51 1 : tunables 0 0 0 : slabdata 194 194 0 inode_cache 2268 2268 592 27 4 : tunables 0 0 0 : slabdata 84 84 0 dentry 285907 286062 192 21 1 : tunables 0 0 0 : slabdata 13622 13622 0 buffer_head 256447 257472 112 36 1 : tunables 0 0 0 : slabdata 7152 7152 0 vm_area_struct 1469 1541 176 23 1 : tunables 0 0 0 : slabdata 67 67 0 mm_struct 82 95 832 19 4 : tunables 0 0 0 : slabdata 5 5 0 files_cache 104 161 704 23 4 : tunables 0 0 0 : slabdata 7 7 0 signal_cache 163 187 960 17 4 : tunables 0 0 0 : slabdata 11 11 0 sighand_cache 145 165 2112 15 8 : tunables 0 0 0 : slabdata 11 11 0 task_xstate 118 140 576 28 4 : tunables 0 0 0 : slabdata 5 5 0 task_struct 128 165 5808 5 8 : tunables 0 0 0 : slabdata 33 33 0 anon_vma 731 896 32 128 1 : tunables 0 0 0 : slabdata 7 7 0 shared_policy_node 85 85 48 85 1 : tunables 0 0 0 : slabdata 1 1 0 numa_policy 170 170 24 170 1 : tunables 0 0 0 : slabdata 1 1 0 idr_layer_cache 240 240 544 30 4 : tunables 0 0 0 : slabdata 8 8 0 kmalloc-8192 27 32 8192 4 8 : tunables 0 0 0 : slabdata 8 8 0 kmalloc-4096 291 344 4096 8 8 : tunables 0 0 0 : slabdata 43 43 0 kmalloc-2048 225 240 2048 16 8 : tunables 0 0 0 : slabdata 15 15 0 kmalloc-1024 366 432 1024 16 4 : tunables 0 0 0 : slabdata 27 27 0 kmalloc-512 536 544 512 16 2 : tunables 0 0 0 : slabdata 34 34 0 kmalloc-256 406 528 256 16 1 : tunables 0 0 0 : slabdata 33 33 0 kmalloc-128 503 576 128 32 1 : tunables 0 0 0 : slabdata 18 18 0 kmalloc-64 3467 3712 64 64 1 : tunables 0 0 0 : slabdata 58 58 0 kmalloc-32 1520 1920 32 128 1 : tunables 0 0 0 : slabdata 15 15 0 kmalloc-16 3547 3840 16 256 1 : tunables 0 0 0 : slabdata 15 15 0 kmalloc-8 4607 4608 8 512 1 : tunables 0 0 0 : slabdata 9 9 0 kmalloc-192 4620 5313 192 21 1 : tunables 0 0 0 : slabdata 253 253 0 kmalloc-96 1780 1848 96 42 1 : tunables 0 0 0 : slabdata 44 44 0 kmem_cache_node 0 0 64 64 1 : tunables 0 0 0 : slabdata 0 0 0

  Read the article

• Android openvpn + zeroconf browser sending mdns query packets over eth0 instead of tap0 interface on wifi

  - by Mrunal

  On an android device, I am connecting to a remote network using openvpn for performing service discovery. WORKING CASE: After the device is camped on 3g/4g and after connecting to remote network by openvpn, when the zeroconf browser is launched, I can see the mdns query packets being send through the tap0 interface resulting into rendering of services on the browser. From the tcpdump captured on the device, I can see that the mdns query packets are send to tap0 interface. tap0 ip: 192.168.11.200 Route table information: Destination Gateway Genmask Flags Metric Ref Use Iface 76.26.112.234 10.179.240.1 255.255.255.255 UGH 0 0 0 pdpbr1 10.179.240.1 * 255.255.255.255 UH 0 0 0 pdpbr1 32.1.72.136 * 255.255.255.255 UH 0 0 0 pdpbr0 10.179.240.0 * 255.255.255.0 U 0 0 0 pdpbr1 192.168.11.0 * 255.255.255.0 U 0 0 0 tap0 default 192.168.11.1 0.0.0.0 UG 0 0 0 tap0 NOT WORKING CASE: However, after switching on the wifi and connecting it to remote network, when the zeroconf browser is launched, instead of sending the mdns query packets to tap0 interface; these packets are being send to eth0 interface due to which we cannot see the services. From the tcpdump captured on the device, I can see that mdns query packets are send to eth0 interface. tap0 ip: 192.168.11.200 eth0 ip: 192.168.43.230 route table information: Destination Gateway Genmask Flags Metric Ref Use Iface 76.26.112.234 192.168.43.1 255.255.255.255 UGH 0 0 0 eth0 32.1.72.136 * 255.255.255.255 UH 0 0 0 pdpbr0 192.168.11.0 * 255.255.255.0 U 0 0 0 tap0 192.168.43.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.11.1 0.0.0.0 UG 0 0 0 tap0 In the above case, even though there is a default route for tap0, all the multicast packets are being routed through eth0. How is this possible? Has anyone observed a similar problem and it would be really helpful if you can help us to discover services through zeroconf browser after the device is connected to remote network via openvpn through wifi. Thank You Very much, Mrunal

  Read the article

• Mozilla sunbird : Multi-day event looks weird in calendar

  - by Manu

  Hello, I'm testing the Mozilla calendar, Sunbird. I've added a 4-days event, but I find that it looks a little weird, compared to what it looks like in google calendar : Sunbird Google Calendar is there an option to have the long events span multiple cells ?

  Read the article

• RAID administration in Debian Lenny

  - by Siim K

  I've got an old box that I don't want to scrap yet because it's got a nice working 5-disk RAID assembly. I want to create 2 arrays: RAID 1 with 2 disks and RAID 5 with the other 3 disks. The RAID card is Intel SRCU31L. I can create the RAID 1 volume in the console that you access with Ctrl+C at startup. But it only allows for creation of one volume so I can't do anything with the 3 remaining disks. I installed Debian Lenny on the RAID 1 volume and it worked out nicely. What utilites could I now use to create/manage the RAID volumes in Debian Linux? I installed the raidutils package but get an error when trying to fetch a list: #raidutil -L controller or #raidutil -L physical # raidutil -L controller osdOpenEngine : 11/08/110-18:16:08 Fatal error, no active controller device files found. Engine connect failed: Open What could I try to get this thing working? Can you suggest any other tools? Command #lspci -vv gives me this about the controller: 00:06.1 I2O: Intel Corporation Integrated RAID (rev 02) (prog-if 01) Subsystem: Intel Corporation Device 0001 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 26 Region 0: Memory at f9800000 (32-bit, prefetchable) [size=8M] [virtual] Expansion ROM at 30020000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: PCI_I2O Kernel modules: i2o_core

  Read the article

• VMpalyer: host keyboard layout on guest?

  - by TheDeeno

  I use the dvorak keyboard layout on windows 7. Also, I have a bunch of custom keys mapped using autohotkey. I'm curious, is it possible to have the guest only receive the keyboard events produced by the host? I don't really know how the host communicates keyboard strokes to guests so I don't know how to enable this or if it's possible. Thoughts? Host OS: Win7 x64 Guest: Unbuntu 9.10 x64

  Read the article

• What DBus signals do I send to players to imitate Gnome's multimedia shortcuts?

  - by culebrón

  I have Xubuntu 11.10, XFCE. I want to send DBus signals to the players so that they worked like in Gnome: you press 'play' key, it plays, 'next' - it forwards, and so on. For that, I need to bind to the multimedia keys a set of commands like this: dbus-send --dest=org.gnome.Rhythmbox ... Now, I searched and can't find it: what signals should I send? I need only 3 events: play, forward and rewind.

  Read the article

• Which IP addresses are using remote dekstop?

  - by Andomar

  We have a server that has an open remote desktop port to the internet (no VPN.) Several people are allowed to log on to the machine remotely. The server runs Windows 7 (desktop OS.) I can find logon times using Event Viewer, but it does not show the IP address of the remote machine. At any rate, manually browsing Event Viewer for all login events would be time consuming, to say the least.) Is a way to find out which IP addresses are using Remote Dekstop ?

  Read the article

• Starting up Ion3 in Ubuntu

  - by Masi

  How can you start up Ion3? I installed Ion by apt-get. I have the exec ion in my .xinitrc. I get >> Unable to redirect root window events for screen 0. >> Refusing to start due to encountered errors.

  Read the article

• How do I load balance between two Linux machines?

  - by William Hilsum

  Inspired by the Stack Overflow network, I am now obsessed with HAProxy and trying to use it myself. At the moment, each HAProxy box has got two network cards (well, two configured, I can have a maximum of 4 and wasn't sure if they needed their own one for management between the boxes). On both machines, the backend one (eth1) is a private IP that goes to a switch connected to the webservers, and the front facing one (eth0) has a public internet IP that is routed straight though. In addition, I have created an additional virtual ip for eth0 called eth0:0 which has got a third public ip address. I just about get how to use it for load balancing between multiple web servers that are behind it, but, I am failing to load balance between the two HAProxy boxes - they appear to fight for the virtual IP, but, this does not appear to be a smart solution. Now, by using the virtual shared IP address, this solution appears to work and does seem to give me maximum uptime, but, is this the correct way to do it, or is there a smarter way? I have been looking at other Linux packages such as keepalived, but, I have only been using Linux (server) for a week now and am at the limits of my understanding. Is there anyone who has done this before and can you advise anything for maximum uptime?

  Read the article

• IIS EventLog Errors

  - by chris

  I keep getting this error in my event viewer on IIS 6. I'm trying to figure out if my error resets my connection (maybe recycles the worker processes?). The error is: An attempt was made to load filter 'C:\Program Files\Software Artisans\FileUp \FileUpIsapi.dll' but it requires the SF_NOTIFY_READ_RAW_DATA filter notification and this notification is not supported in Worker Process Isolation Mode. For more information, see Help and Support Center at http://go.microsoft.com/fwlink /events.asp.

  Read the article

• trigger a DNS change in Active directory

  - by Paddy Carroll

  Can I get solar winds to change a DNS alias in Active directory based upon a specific set of events or conditions? I have a collection of applications that use hostnames in combination with database names in order to resolve database connections, problem is that they haven't considered how a failover would work in practice so I want the product to provoke a change in DNS to point the apps at the right place if we get into a failure situation. Can it be done?

  Read the article

• APPCMD syntax issue

  - by Adam

  I am trying to setup recycling logging events, using the following: appcmd set config /section:applicationPools /[name=' AppPoolName '].recycling.logEventOnRecycle:time But I am getting this error: Failed to process input: The parameter ''].recycling.logEventOnRecycle:time' mus t begin with a / or - (HRESULT=80070057). I used this technet article but I cannot figure out where I went wrong. Any ideas?

  Read the article

• How can i find the trigger of an acpi event ?

  - by n00ki3

  My Server shutsdown . Evertime at midnight. The acpi Event power_button is triggered. at /etc/acpi/events/power_button power_button: # care about the power button event=button/power.* action=/usr/lib/acpid/power_button How can i find out the "Caller" or the Trigger of this event ?

  Read the article

• VPN messes up DNS resolution

  - by user124114

  After connecting with the Kerio VPN client (OS X Leopard) to a server, the internet (~web browsing) stopped working for the client. After poking around, the issue seems to be bad DNS server (i.e., entering IPs directly works). After disconnecting from the VPN, the invalid DNS server disappears from scutil --dns and all's well again. Now, I don't understand why OS X on the client even changes the DNS settings -- internet should be routed through a different interface, through the default gateway, not through the VPN. Questions: By what mechanism does connecting the VPN client change the "default" DNS server? How can I stop the VPN client from changing routing/DNS rules? Where is this stuff stored/modified? Before VPN: $ scutil --dns DNS configuration resolver #1 nameserver[0] : 10.66.77.1 # <---- default gateway = home router; all good order : 200000 resolver #2 domain : local options : mdns timeout : 2 order : 300000 ... VPN connected: $ scutil --dns DNS configuration resolver #1 nameserver[0] : 192.168.1.1 # <--- rubbish nameserver[1] : 192.168.2.1 order : 200000 resolver #2 domain : local options : mdns timeout : 2 order : 300000 ... The VPN doesn't appear among $ networksetup -listallnetworkservices.

  Read the article

• iptables secure squid proxy

  - by Lytithwyn

  I have a setup where my incoming internet connection feeds into a squid proxy/caching server, and from there into my local wireless router. On the wan side of the proxy server, I have eth0 with address 208.78.∗∗∗.∗∗∗ On the lan side of the proxy server, I have eth1 with address 192.168.2.1 Traffic from my lan gets forwarded through the proxy transparently to the internet via the following rules. Note that traffic from the squid server itself is also routed through the proxy/cache, and this is on purpose: # iptables forwarding iptables -A FORWARD -i eth1 -o eth0 -s 192.168.2.0/24 -m state --state NEW -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A POSTROUTING -t nat -j MASQUERADE # iptables for squid transparent proxy iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j DNAT --to 192.168.2.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 3128 How can I set up iptables to block any connections made to my server from the outside, while not blocking anything initiated from the inside? I have tried doing: iptables -A INPUT -i eth0 -s 192.168.2.0/24 -j ACCEPT iptables -A INPUT -i eth0 -j REJECT But this blocks everything. I have also tried reversing the order of those commands in case I got that part wrong, but that didn't help. I guess I don't fully understand everything about iptables. Any ideas?

  Read the article

• Virtual Machine Network Architecture, Isolating Public and Private Networks

  - by Mark

  I'm looking for some insight into best practices for network traffic isolation within a virtual environment, specifically under VMWARE ESXi. Currently I have (in testing) 1 hardware server running ESXi but i expect to expand this to multiple pieces of hardware. The current setup is as follows: 1 pfsense VM, this VM accepts all outside (WAN/internet) traffic and performs firewall/port forwarding/NAT functionality. I have multiple public IP addresses sent to the this VM that are used for access to individual servers (via per incoming IP port forwarding rules). This VM is attached to the private (virtual) network that all other VMs are on. It also manages a VPN link into the private network with some access restrictions. This isn't the perimeter firewall but rather the firewall for this virtual pool only. I have 3 VMs that communicate with each other, as well as have some public access requirements: 1 LAMP server running an eCommerce site, public internet accessible 1 accounting server, access via windows server 2008 RDS services for remote access by users 1 inventory/warehouse management server, VPN to client terminals in warehouses These servers constantly talk with each other for data synchronization. Currently all the servers are on the same subnet/virtual network and connected to the internet through the pfsense VM. The pfsense firewall uses port forwarding and NAT to allow outside access to the servers for services and for server access to the internet. My main question is this: Is there a security benefit to adding a second virtual network adapter to each server and controlling traffic such that all server to server communication is on one separate virtual network, while any access to the outside world is routed through the other network adapter, through the firewall, and on the the internet. This is the type of architecture i would use if these were all physical servers, but i'm unsure if the networks being virtual changes the way i should approach locking down this system. Thank you for any thoughts or direction to any appropriate literature.

  Read the article

• Require and Includes not Functioning Nginx Fpm/FastCGI

  - by Vince Kronlein

  I've split up my FPM pools so that php will run under each individual user and set the routing correctly in my vhost.conf files to pass the proper port number. But I must have something incorrect in my environment because on this new domain I set up, require, require_once, include, include_once do not function, or rather, they may not be getting passed up to the interpreter to be rendered as php. Since I already have a Wordpress install on this server that runs perfectly, I'm pretty sure the error is in my server block for nginx. server { server_name www.domain.com; rewrite ^(.*) http://domain.com$1 permanent; } server { listen 80; server_name domain.com; client_max_body_size 500M; index index.php index.html index.htm; root /home/username/public_html; location / { try_files $uri $uri/ index.php; } location ~ \.php$ { if (!-e $request_filename) { rewrite ^(.*)$ /index.php?name=$1 break; } fastcgi_pass 127.0.0.1:9002; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } location ~ /\.ht { deny all; } } The problem I'm finding I think is that there are dynamic calls to the doc root index file, while all calls to anything within a sub-folder should be routed as normal ie: NOT passed to index.php. I can't seem to find the right mix here. It should run like so: domain.com/cindy (file doesn't exist) --> index.php?name=$1 domain.com/admin/anyfile.php (files DO exist) --> admin/anyfile.php?$args

  Read the article

• How to Load Balance 2 Internet Connections on a Windows 7 machine?

  - by Jimmy Chandra

  It's sort of related to this particular question, but that one is on Mac. I am looking for similar solution on Windows 7. I have 2 network connections: (Connection A) Wireless terminal connecting to ISP A (3G / EVDO internet provider) (Connection B) Broadband wired connection connecting to ISP B (Cable internet provider) Both has access to the internet. When I try connecting to a website and checking the networking tab on my Task Manager, I only see the network traffic being routed to only Connection A. Is there a way to make the computer to utilize both network (in a sense using all the bandwidth available from both the Cable ISP and the 3G / EVDO ISP) at the same time? If so, what do I need to do to set this up ... on Windows 7? Here is a bit more info on my network connections (ipconfig /all): PPP adapter Wireless Terminal: IPv4: aa.bb.ccc.ddd(preferred) Subnet mask: 255.255.255.255 Default Gateway: 0.0.0.0 DNS: aa.ee.f.ggg aa.ee.f.hhh Primary Wins: jjj.ii.k.l Secondary Wins: jjj.ii.k.m Ethernet adapter LAN: IPv4: 192.168.1.100 (connected to a router by wired that itself connect to a cable modem) subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 (the wireless router) DHCP: 192.168.1.1 (the wireless router) DNS: xxx.yy.zz.ww rr.sss.t.uuu For my own privacy, I don't believe the actual number matters, the patterns are representative of the ip numbering scheme...

  Read the article

• open source web application for viewing .ics calendars

  - by aaron

  I need an open source web application that allows users to view .ics calendars I am hosting a calendar with DAViCal, and users can view/edit calendars with their own clients (like Apple iCal or Mozilla Sunbird), but I want a web app that will display the public calendars so people w/o a user account can view the calendar just by visiting a URL. Requirements: Open source web app: something I can host right along with DAViCal Human-readable calendar: i.e. it has a day/week/month view to visualize calendar events

  Read the article

• Scroll shell output with mouse in tmux

  - by user31494

  Mouse scrolling doesn't work in tmux the way it works when I run shell without tmux (in Gnome Terminal). It seems tmux sends mouse scroll events as if I pressed Up/Down keys. But I want it to scroll though the shell output history. Is there a way to make tmux work like this? Note: I know how to scroll with keyboard (thanks to another question here). Tried mouse scrolling in two versions of tmux: 0.8-5hardy1 (on Ubuntu Hardy) 1.3-1 (on Ubuntu Maverick)

  Read the article

• Why won't my Windows 8 Command line update its path

  - by mawcsco

  I needed to add a new entry to my PATH variable. This is a common activity for me in my job, but I've recently started using Windows 8. I assumed the process would be similar to Windows 7, Vista, XP... Here's my sequence of events: Open System properties (Start- [type "Control Panel"] - Control Panel\System and Security\System - Advanced system settings - Environment Variables) Add the new path to beginning of my USER PATH variable (C:\dev\Java\apache-ant-1.8.4\bin;) Opened a command prompt (Start - [type "command prompt" enter] - [type "path" enter] My new path entry is not available (see attached image and vide). I Duplicated the exact same process on a Windows 7 machine and it worked. EDIT Windows 8 Environment Variables and Command Prompt video EDIT This is definitely not the behavior of Windows 7. Watch this video to see the behavior I expect working in Windows 7. http://youtu.be/95JXY5X0fII EDIT 5/31/2013 So, after much frustration, I wrote a small C# app to test the WM_SETTINGCHANGE event. This code receives the event in both Windows 7 and Windows 8. However, in Windows 8 on my system, I do not get the correct path; but, I do in Windows 7. This could not be reproduced in other Windows 8 systems. Here is the C# code. using System; using Microsoft.Win32; public sealed class App { static void Main() { SystemEvents.UserPreferenceChanging += new UserPreferenceChangingEventHandler(OnUserPreferenceChanging); Console.WriteLine("Waiting for system events."); Console.WriteLine("Press <Enter> to exit."); Console.ReadLine(); } static void OnUserPreferenceChanging(object sender, UserPreferenceChangingEventArgs e) { Console.WriteLine("The user preference is changing. Category={0}", e.Category); Console.WriteLine("path={0}", System.Environment.GetEnvironmentVariable("PATH")); } } OnUserPreferenceChanging is equivalent to WM_SETTINGCHANGE C# program running in Windows 7 (you can see the event come through and it picks up the correct path). C# program running in Windows 8 (you can see the event come through, but the wrong path). There is something about my environment that is precipitating this problem. However, is this a Windows 8 bug?

  Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >