Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 182/1359 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

  • Error on restarting networking :SIOCSIFFLAGS

    - by Paddington
    I have a sever with 2 network cards, an internal IP on one card (eth0) and external IPs (aliased) on the other card (eth1). I lost connection the public network and I tried to restart networking with /etc/init.d/networking restart and got the error "SIOCSIFFLAGS: cannot assing requested IP and Failed to bring up eth1". I even added the IPs in the interfaces file but still got an error on restarting. I could not ping my default gateway. A work around was to add ifconfig eth 0 x.x.x.x route -add default gw x.x.x.z I could then connect to the public network. What could be the issue here?

    Read the article

  • After update, flash plugin playing video too fast or too slow

    - by John H
    Last night I did an update and reboot. After that, I couldn't reliably play any flash videos. They would either go too fast or stutter (as if they were buffering every 2 seconds). This occurs in both Firefox and Chrome, however I'll troubleshoot in Chrome because it's easier to enable/disable plugins at will. With PPAPI enabled (and npapi disabled), flash videos play at 1.5x speeds and audio is scrambled. With NPAPI enabled (and ppapi disabled), flash videos stutter and skip, despite showing a decent buffer. From one old thread, I went into pavucontrol and tried disabling the high def audio controller. I also tried disabling Totem plugin to no affect. Version other details: Linux freshdesk 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ cat /etc/*-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" Shockwave Flash 11.3 r31 /opt/google/chrome/PepperFlash/libpepflashplayer.so 11.3.31.331 PPAPI (out-of-process) Shockwave Flash Version: 11.2 r202 Location: /usr/lib/adobe-flashplugin/libflashplayer.so Type: NPAP 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)

    Read the article

  • Palm Centro not even appearing on desktop

    - by DaimyoKirby
    Background: I'm trying to set up my dad's new installation of Xubuntu 12.10 (I finally got him to switch from Windows :-D) so he can sync his Palm Centro on his computer. I installed J-Pilot, but the problem is that his palm isn't even showing up anywhere on the computer. When it's plugged in, it lit up and began to charge when I told it to try and sync with the computer, but it failed the sync and Xubuntu still doesn't recognize it. Question: Does anyone know how I can get his Palm to be recognized by Xubuntu?

    Read the article

  • Convert mkv to mp4 with ffmpeg

    - by JohnS
    When I try converting mkv to mp4 using ffmpeg, the following error occurs: [ipod @ 0x16fa0a0] Application provided invalid, non monotonically increasing dts to muxer in stream 0: -2 = -2 av_interleaved_write_frame(): Invalid argument I used this command to convert the file: ffmpeg -i input.mkv -vcodec copy -acodec copy -absf aac_adtstoasc output.m4v The input file has the following characteristics: mediainfo input.mkv General Unique ID : 200459305952356554213392832683163418790 (0x96CF0ED8DB5914CBB9E18163689280A6) Complete name : input.mkv Format : Matroska Format version : Version 2 File size : 1.46 GiB Duration : 1h 5mn Overall bit rate : 3 168 Kbps Encoded date : UTC 2010-09-26 21:44:02 Writing application : mkvmerge v2.9.5 ('Tu es le seul') built on Jun 17 2009 16:28:30 Writing library : libebml v0.7.8 + libmatroska v0.8.1 Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : [email protected] Format settings, CABAC : Yes Format settings, ReFrames : 4 frames Codec ID : V_MPEG4/ISO/AVC Duration : 1h 5mn Bit rate : 2 910 Kbps Width : 1 280 pixels Height : 720 pixels Display aspect ratio : 16:9 Frame rate : 25.000 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Bits/(Pixel*Frame) : 0.126 Stream size : 1.31 GiB (90%) Writing library : x264 core 105 r1724 b02df7b Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=6 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-2 / threads=18 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=0 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc=2pass / mbtree=0 / bitrate=2910 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.00 Default : Yes Forced : No Audio ID : 2 Format : AC-3 Format/Info : Audio Coding 3 Mode extension : CM (complete main) Codec ID : A_AC3 Duration : 1h 5mn Bit rate mode : Constant Bit rate : 256 Kbps Channel(s) : 2 channels Channel positions : Front: L R Sampling rate : 48.0 KHz Bit depth : 16 bits Compression mode : Lossy Stream size : 121 MiB (8%) Language : English Default : Yes Forced : No Being new to ffmpeg, I'm not sure what the error means or how to correct it. Thanks!

    Read the article

  • How to enable 3D acceleration under VMware workstation 8?

    - by Yan Zhou
    I saw there are similar questions, but I don't think they answer exactly my questions. Did anyone managed to get 3D acceleration work under VMWare workstation 8? I have VMware 8.01 installed on Ubuntu 11.10. The guest I am trying is also Ubuntu 11.10. I manually installed vmware-tools and it went well, except the X-config part was skipped as it said the distribution driver is used. The guest runs well but it seems fall back to 2D mode. Does any one has any idea how to enable 3D acceleration under VMWare workstaion with Linux guest?

    Read the article

  • Installed Ubuntu 14.04LTS

    - by user291729
    On my laptop which came pre-installed with Windows 8.1. Felt I needed to see the competition for myself to establish which was a better OS. So I followed the channels to dual boot. All seemed fine and I accessed Ubuntu with no issues after selecting this from the menu to select the OS. I should add that the boot method was changed to legacy. However, since using Ubuntu, I no longer have the ability to select the OS. The laptop simply logs straight into Ubuntu. I therefore attempted to access the recovery options, only it appears the Windows 8 bootloader has somehow been corrupted as I am now told to use the Windows 8 recovery disc (which, as this was pre-installed - I do not have). Left with no other alternative, I have scoured these forums without success, and so I am hoping someone in the know (or who has experienced similar) can help. I have tried boot repair again without success. On rebooting I am only presented with a basic splash screen asking me to select Ubuntu, Memtest, Windows 8 Recovery or Windows 8 Bootloader (The bootloaders again require I insert the disc). I have tried Code: cat /boot/grub/grub.cfg df -h sudo fdisk -l cat /proc/partitions # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda9 84G 7.1G 73G 9% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 3.9G 4.0K 3.9G 1% /dev tmpfs 794M 1.4M 793M 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 80K 3.9G 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sdc1 7.5G 2.2G 5.4G 29% /media/john/DYLANMUSIC /dev/sr0 964M 964M 0 100% /media/john/Ubuntu 14.04 LTS amd64 /dev/sdb1 1.9T 892G 972G 48% /media/john/Storage Main WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4e2ccf75 Device Boot Start End Blocks Id System /dev/sda1 1 1953525167 976762583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdc: 8011 MB, 8011120640 bytes 41 heads, 41 sectors/track, 9307 cylinders, total 15646720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 15646719 7819328 b W95 FAT32 Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc7d968ff Device Boot Start End Blocks Id System /dev/sdb1 64 3907029119 1953514528 7 HPFS/NTFS/exFAT major minor #blocks name 8 0 976762584 sda 8 1 266240 sda1 8 2 1509376 sda2 8 3 266240 sda3 8 4 131072 sda4 8 5 841012780 sda5 8 6 358400 sda6 8 7 35376128 sda7 8 8 1024 sda8 8 9 89501696 sda9 8 10 8337408 sda10 11 0 987136 sr0 8 32 7823360 sdc 8 33 7819328 sdc1 8 16 1953514584 sdb 8 17 1953514528 sdb1 I am no expert on this and I'm at a loss as how to correct this without having to re-format everything and reinstall Windows 8. However, if I'm to try using Ubuntu again then there is the risk this problem may come back. Again, I did not do anything manually - the installer did everything (with the exception of changing the boot to Legacy to allow the booting of another bootloader). LiveCD works but doesn't give me the options that I've seen here and as mentioned earlier, only boot recovery only gives me the options as mentioned earlier. Also this fails to load via USB (possibly because HDD comes before USB in the boot order?). Being used to a Windows environment, the Ubuntu (and Linux) environment is a dive at a less than comfortable depth at present (but one I fully intend to get to grips with - especially the commands being more common via Terminal). I very much appreciate the help with this guys.

    Read the article

  • Tips for debugging Samba performance?

    - by j-g-faustus
    Samba gives me 24 MB/s read and 44 MB/s write, while ftp gives 97 and 112 MB/s under the same circumstances. The documentation says that Generally, you should find that Samba performs similarly to ftp at raw transfer speed. In my case it clearly doesn't. Where can I find tips on how to debug Samba performance? Or alternatively tips for replacing Samba with something else? (I can't use ftp, unfortunately, as I need something that can be used with rsync/rsnapshot.) More details: Both computers are running Ubuntu 10.10 (using Samba because I have a Mac as well) The Samba share is on a local home network, mounted as $ mount ... //server.local/share/ on /mnt/share type cifs (rw,mand) Samba performance was tested by copying (cp) a single file of ~4GB to and from the share, using time for timing and calculating transfer speed by hand. ftp performance are the numbers from the ftp client for get/put of the same file. iperf gives network speed ~900 Mbits/s bonnie++ gives disk speeds 200 MB/s on both sides for block reads as well as block writes Tried changing the parameters suggested in the performance tuning HOWTO (read/write raw, read size, socket options), most of them made little to no difference. (The one that made a difference caused write speed to drop 50%.)

    Read the article

  • Keyring Password, Unity in 11.10

    - by Collin Owens
    Login to 11.10 I input my password and shortly afterward I am asked for a keyring password. I realize that I was asked for this during installation (second time lucky!) and I did enter a password (what a mistaka to maka). This now entails my having to input the keyring password on every boot up! Looking at previous answers it would seem that the applications - accesories - password and encryption keys - was the suggested route. However I assume that was in Gnome (At this stage I look back in fondness!!!) Certainly, I don't get the same route in Unity! I saw a reference to seahorse in a terminal - but this results in several error reports and a sub windows which does not seem to open. The objective in this exercise is to log in using the login password and not also the keyring password! any help would be appreciated - thank you

    Read the article

  • No contact list in MSN

    - by David
    Since today I can't see my contact list en empathy IM, using the MSN protocol. I've tried uninstalling, reinstalling, erasing all config files from my computer (using ubuntu tweak and erasing the config files from my /home folder), but nothing solve the problem Time ago people have the same problem, they're solved it changing a line in a script, but that bug was solved in latest versions of empathy. I've tried to change that script, using other lines. /usr/lib/pymodules/python2.6/papyon/service/description/SingleSignOn/RequestMultipleSecurityTokens.py I've changed the line CONTACTS = ("contacts.msn.com", "MBI") by the older one: CONTACTS = ("contacts.msn.com","?fs=1&id=24000&kv=7&rn=93S9SWWw&tw=0&ver=2.1.6000.1") But this no fix the bug In advanced options I have this (in empathy account options): Server: messenger.hotmail.com Port: 1863 How can I solve this? Please help

    Read the article

  • Running Apache and Tomcat together on different subdomains?

    - by Ritesh M Nayak
    Posted this on ServerFault but didn't get a response. Hoping I will have better luck on the Ubuntu site. I have been trying to get this working the whole of today. I have a server which resolves to the domain example.com . This is running Apache2 and Tomcat 6. The requirement is to direct requests to example.com to apache2 and app.example.com to Tomcat. I know I have to do a VirtualHost proxy pass for this to work. Here are the settings on my server. /etc/hosts file looks something like this 127.0.0.1 localhost localhost.localdomain example.com app.example.com I have two virtual host files for the different domains in /etc/apache2/sites-enabled /etc/apache2/sites-enabled/example.com looks like this <VirtualHost *:80> # Admin email, Server Name (domain name) and any aliases ServerAdmin webmaster@localhost ServerName example.com ServerAlias www.example.com DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> /etc/apache2/sites-enabled/app.example.com file looks like this <VirtualHost *:80> ServerName app.example.com ServerAlias www.app.example.com ProxyPreserveHost On ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ SetEnv force-proxy-request-1.0 1 SetEnv proxy-nokeepalive 1 </VirtualHost> mod_proxy and mod_rewrite are both enabled on the apache instance. I have a CNAME entry for both example.com and app.example.com. When accessing app.example.com, I get an 403 forbidden, saying I have no access to / on the server. What am I doing wrong?

    Read the article

  • Lenovo Ideapad 205 and Ubuntu 12.04 LTS

    - by Oranges
    I just wanted to report one thing, because I know there are a lot of Ideapad S205 users out there, that had issues running Ubuntu on their Lenovo Ideapad S205 in the past. Lenovo Ideapad with Ubuntu 12.04 LTS: Everything works out of the box. I just installed it and everything, including the microphone, the webcam, the WLAN, the AMD E-350 CPU/GPU and the sound worked right away. In other words: Everything works. Even the AMD E-350 GPU works very well with the Open Source drivers and with the prop. drivers. The prop. drivers were automatically offered to me via Ubuntu itself. It works great. A long idea, written short: I love it. It's extremly stable and very fast. I am using the German version of the Idepad S205, combined with the 32bit version of Ubuntu. There is only one, single thing to keep in mind when installing Ubuntu on the S205: Plugin your USB/CD/DVD drive in the left USB-Port. I don't know why, but it only works with the USB-Port on the left side of the Netbook. This is only for installing Ubuntu. After it has been installed and updated successfully, all of the USB ports will work. Oranges - feedback on Lenovo S205 with Ubuntu 12.04 LTS.

    Read the article

  • Python script as a service on Ubuntu 11.10

    - by bugs99
    I am facing the following problem. I want to run a python script as a service on Ubuntu 11.10 system (already mentioned in the following link: Python service using Upstart on Ubuntu) I followed the steps mentioned in the above mentioned link, but i got the following error message in syslog: init: script main process (21826) terminated with status 1 Jun 8 16:59:55 bilbo kernel: [263012.984531] init: script main process ended, respawning Jun 8 16:59:55 bilbo kernel: [263013.044099] init: script main process (21827) terminated with status 1 The above two lines are getting repeated all the time. On saying sudo start script, I get the following: $ sudo start script script start/running, process 21826 Following is the content of my script.conf placed in /etc/init: description "Used to start python script as a service" author "bilbo" start on runlevel [2] stop on runlevel [06] exec python /home/bilbo/scripts/webserver.py respawn Please tell me what I am doing wrong? Do I have to change my python code as well?

    Read the article

  • Another ubuntu one music problem with ID3-Tags ("unknown artist" problem)

    - by Andi
    I started using ubuntu one a few days ago. I put some MP3s into the cloud music folder and I can play them just fine in the music web and andriod applications. The problem is that all files are sorted under "unknown artist" and "unknown album" and the title is either the file name or a part of it (which is from the service "guessing the title" I guess). It seems the problem happened before. I looked in the FAQ, which said this happens with m4a files, but I use mp3 files. The ID3 tags are correct and are tagged with ID3v1 and ID3v2. I read to wait, until the service can catch up with the tagging, so I waited 24 hours, still nothing. Every single file is still listed under unknown artist/unknown album. I'm running out of options here :/

    Read the article

  • Passenger (mod-rails) can't find libopenssl-ruby

    - by flintinatux
    Trying to build an nginx server with Phusion Passenger on Ubuntu 11.10 (hurray for the new version!). Running "passenger-install-nginx-module" outputs the following error: * OpenSSL support for Ruby... not found With the following suggestion to fix it: * To install OpenSSL support for Ruby: Please run apt-get install libopenssl-ruby as root. Running "sudo apt-get install libopenssl-ruby" yields the following output: Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'libruby' instead of 'libopenssl-ruby' libruby is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. A little research shows that libruby is a virtual package that provides libopenssl-ruby as part of the package. However, the passenger-install-nginx-module script still can't find it, and keeps throwing the same error. Help me, please! I'm in a little over my head on this one, and the google-the-error-code method that usually works is failing me today.

    Read the article

  • How to create a PPA for C++ program?

    - by piotr
    My questions are: c++/gtkmm project created with NetBeans. How to make package to PPA from this? I have created target files structure (*.desktop, iconfile, ui glade files). Binary goes to /opt/extras.ubuntu.com/myagenda/bin/myagenda. There is also a folder of glade files, that must go to /opt/extras.ubuntu.com/myagenda/bin/myagenda/ui. Desktop file goes to /usr/share/applications/myagenda.desktop. Icon goes to /usr/share/icons/hicolor/scalable/apps/myagenda.svg As you see, there is really small amount of files. Now, how to manage all this stuff, to create package on PPA, which knows where and how put this files to their targets? +-- opt ¦   +-- extras.ubuntu.com ¦   +-- myagenda ¦   +-- bin ¦   ¦   +-- myagenda ¦   +-- ui ¦   +-- item_btn_delete.png ¦   +-- item_btn_edit.png ¦   +-- myagenda.png ¦   +-- myagenda.svg ¦   +-- reminder.png ¦   +-- ui.glade +-- usr +-- share +-- applications ¦   +-- myagenda.desktop +-- icons +-- hicolor +-- scalable +-- apps +-- myagenda.svg Update: Created install file in debian directory with targets: data/myagenda /opt/extras.ubuntu/com/myagenda/bin data/ui/* /opt/extras.ubuntu/com/myagenda/ui data/myagenda.desktop /usr/share/applications data/myagenda.svg /usr/share/icons/hicolor/scalable/apps After dpkg-buildpackage it builds, but for amd64 architecture. Now, trying to change that to i386.

    Read the article

  • Bug in firefox address bar autocomplete running on KDE

    - by marcus
    Has anyone experienced this graphical glitch when typing in Firefox address bar? The drop-down list is not drawn correctly, with some "blocks" missing. After typing more letters or hovering the mouse cursor, the list redraws itself and becomes complete. I'm running Ubuntu 12.04, Firefox 13.0.1 and this only happens in KDE (tested with 4.8.2, 4.8.3 and 4.8.4). It does not happen in Unity or Xfce with the same user profile. If I go to the KDE control panel and disable the Fade effect, the bug starts to happen to almost every menu in the system, including, the taskbar window previews. Enabling the “Fade” effect corrects the bug everywhere except in Firefox. I have an Nvidia card and I am using the proprietary driver (current, not current-updates -- not sure about the difference), but the linked question on an Arch Linux forum says this happen with the open source driver and with other cards too. Does anyone have an idea for a solution?

    Read the article

  • Using JuJu with private Openstack cloud deployment?

    - by user76054
    I'm seeing a number of problems trying to use JuJu with our internally deployed Openstack cloud. Most of this appears to be centered around DNS host resolution as well as the need to deal with our company's internal HTTP proxies. Our Openstack deployment relies upon an unroutable 172.16.0.0/12 block of addresses for VLAN allocation to each project (tenant) hosted on our internal cloud. User's have the option of assigning one or more floating addresses to instances, allocated from a block of routable addresses on our internal companies LAN. Currently, Openstack doesn't register instance names with anything other than the DNSMASQ service running on the cloud controller. As such, there's no way to resolve this address through our internal DNS hierarchy (this issue has already been reported as Bug #945505). As such, even though I can bootstrap my JuJu server node, I can't connect to it with the JuJu client, since it can't resolve the local (private) network name. I am able to ssh to the node, once I've assigned it an internally routable (i.e. floating) address. Which leads to the next issue. Next, to install software on an instance running in our cloud, it must have our internal proxy address defined - either in the apt.conf file or via environment variables. Unfortunately, when bootstrapping the server node, there's no provision to pass this info into a instance via JuJu environment.yaml file (if this is even the best way to handle this issue). As a result, the bootstrap node is unable to install the required packages. I'm assuming (dangerous, I know) that the way that I've deployed Openstack in our internal environment is probably not unique. Has anyone else encountered these issues? And more importantly, are work arounds available? Regards, Ross

    Read the article

  • How to set-up DSL dialer for Ubuntu 12.04 LTS

    - by Mohammad Yaseen
    I have just installed Ubuntu 12.04 LTS and I'm unable to get my DSL dialer working properly. To set this up in Windows 7 I had to do following: Control Panel --- Network and Intertnet Network and sharing center --- Setup a new network or connection Connect to the internet --- Broadband PPPoE Enter username and Password.. CLick 'Connect' and Done. I am doing following steps in Ubuntu with no luck: Click on 'Two Arrows' (i don't know what they are called) on upper right corner. Configure VPN --- DSL tab --- Add Then I entered username, password, MAC address and Clone MAC address (copied from Auto Ethernet). Save The same set up used to work with Ubuntu 10.10 but it is not working here. Now whenever I click on DSL Connection 1 to connect dialer 'Auto Ethernet' gets disconneted and I end up with no Internet connection. I am new to Ubuntu, Please suggest some easy steps. I have installed ubuntu alongside windows. And dialer works fine in Windows environment, i am writing this in Windows .

    Read the article

  • Upgrading to Mono 2.8

    - by Oli
    Mono 2.8 was recently released boasting a couple of large performance improvements. It's far too late for it to make it into Maverick and I'm fairly inpatient. I don't use Mono for anything mission-critical (just playing music and sorting photos) and if it breaks everything related to Mono, I can probably either live with it or fix it. I'm aware of how much I stand to lose if I mess things up. So with that acknowledged, does anybody here know how to build Mono in a way where it could be dropped in to replace the current Mono (2.6.7)? By this I mean ideally mirroring the packages that Ubuntu uses so that if the worse does happen, I can just downgrade the packages. Or is there a PPA that does all this for me?

    Read the article

  • Nothing happens when I connect my Iphone 3G to my laptop

    - by Allwar
    Hi, how do i connect my iphone to my laptop (ubuntu 10.04) so that i can sync music and be able to look at it as a usb stick? (this is what I want to do but there is a problem.) When i connect it to my laptop nothing happens, it doesn't show up as an ikon or as a mass storage device. My Iphone runs 4.2.1 it's an Iphone 3G and it's not jailbroken for the moment, is that a problem? My laptop is an Asus 1201n ubuntu 10.04 (64-bits) Bus 002 Device 005: ID 05ac:1292 Apple, Inc. iPhone 3G I connected my Ipod Video (30 gb) and that one doesn't appear as well So I'm kind of stuck now. The problem probably lies in the system, because the usb port is working. Bus 002 Device 006: ID 05ac:1209 Apple, Inc. iPod Video I have added this PPA, I have done all of the sudo update and upgrade. but my computer doesn't realize that my Iphone is connected, whish isn't related to libimobiledevice. The port is working fine, it's my computer it doesn't recognize that I have my Iphone plugged-in! and the phone is working (tested it on my mac). I have the latest versions of these programs: hipo, ipod, gtkpod, ifuse, libusmuxd1 and usbmxd. I try to mount my iphone with fuse but i got this error. ( I connected my iPhone in windows 7 and it worked annoyingly.) alvar@alvars-laptop:~$ ifuse /mnt/iphone/ ERROR: the mount point specified does not exist

    Read the article

  • Ubuntu Extras keyring error

    - by Pawan Neupane
    Recently I got lots of GPG errors and tried the following methods at various stages: sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 3E5C1192 sudo apt-get install -reinstall ubuntu-extras-keyring (For Ubuntu Extras only) gpg –keyserver keyserver.ubuntu.com –recv 3E5C1192 gpg –export –armor 3E5C1192 | sudo apt-key add - sudo apt-get update sudo aptitude -o Acquire::http::No-Cache=True -o Acquire::BrokenProxy=true update sudo -i apt-get clean cd /var/lib/apt mv lists lists.old mkdir -p lists/partial apt-get clean apt-get update I again got BADSIG error for extras.ubuntu.com today. So, I'm really at a loss what's causing this error to occur time and again. I really want to solve this problem once and for all.

    Read the article

  • How to zero out a drive?

    - by Mohd Arafat Hossain
    I'm currently running Ubuntu 12.04 and want to completely format my laptop so I can install Windows 7 (replace Ubuntu). When I put in my bootable USB with the OS it just shows a black screen with a white blinking cursor on the top left corner. I wait for hours (to be specific 5 whole hours) waiting for something to happen but I get nothing, so I pull out the USB and my Ubuntu 12.04 loads up. Repeated this several times with putting different boot priority options on top-est that relate to USB but the results are same. I go and visit some sites on the net like this http://www.techspot.com/community/topics/cant-replace-ubuntu-with-windows.175716/ that say I have to zero out my hard drive. My question is how? Note: Erasing out all my data is no problem cause I have nothing important to backup. If I have to lose my primary OS (Ubuntu 12.04) in the process I am ready to as my aim is just to install Windows 7 successfully. Please don't answer that there is something wrong with my USB or my USB reader/port/hardware or the content inside the USB cause they all works fine on my brothers PC as it boots up flawlessly.

    Read the article

  • Black screen in installation when Nvidia graphic card plugged

    - by jopasso1
    When I try to install any recent version of Ubuntu, the screen shows some green and purple mess (like analog TVs when thers no signal). Then, a black screen. I guess it keeps booting in live/install mode. But I can't see it. I tried installing from CD and USB, I tryed changing some BIOS settings... I installed older versions, like 8.04, and it worked, but after updating the system, it crashes again. That's why I discovered that upgrading Nvidia drivers, made system show a black screen again. After that, I unplugged the Nvidia card and installed 12.04 with onboard card. It worked perfectly. Then, I plugged Nvidia again and system booted, but only showing that black screen again. I keep working with onboard card, so far... The nVidia is a GeForce 8500GT.

    Read the article

  • Error: You need to load the kernel first in Grub

    - by Exeleration-G
    I have Lubuntu 11.10 installed on /dev/sda3, and Xubuntu 11.10 on /dev/sda5. A while ago, while being on Lubuntu, I made a mistake somewhere in creating a Live USB: by mistake, I installed a Live USB bootloader into /dev/sda3. This didn't result in any problem at that time. Today, I updated the kernel. I had to restart Lubuntu. In Grub, Lubuntu suddenly didn't appear anymore, and I booted automatically in Xubuntu. I tried to run update-grub and tried to use grub-customizer to get Lubuntu back in Grub, but this didn't work. I ran os-prober, but it doesn't show me Lubuntu. Then, I tried to add a new entry to /etc/grub.d/ on /dev/sda5 called 12_lubuntu. It contained the following: #!/bin/sh -e echo "Lubuntu" cat << EOF menuentry "Lubuntu" { set root=(hd0,3) linux /boot/vmlinuz initrd /boot/initrd.img } EOF After doing that, I ran update-grub and with grub-customizer, I wrote the Grub-configuration to MBR, that is: /dev/sda. Suddenly, Lubuntu appeared in Grub. I tried to launch it, but when doing this, the following message appeared: Error: You need to load the kernel first How can I make Grub start Lubuntu again?

    Read the article

  • How can I enable Gnome Shell Extensions with Ubuntu 11.10?

    - by TheGeeko61
    I am having a problem similar to that asked (and solved) here: Can't enable GNOME Shell extensions. I have performed both of the "tweaks" explained in that solution (i.e., here and here); but that does not seem to help. My gnome-shell is version 3.2.1. When I run gnome-tweak-tool from a shell, I get the following output: CRITICAL: Unknown extension error CRITICAL: Unknown extension error CRITICAL: Unknown extension error CRITICAL: Unknown extension error CRITICAL: Unknown extension error CRITICAL: Unknown extension error CRITICAL: Unknown extension error (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed (gnome-tweak-tool:7823): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width = 0' failed Has anyone actually solved this besides to the references above? I have made the suggested modifications from those sites.

    Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >