Search Results

Search found 11687 results on 468 pages for 'ex networking guy'.

Page 182/468 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

• Network Sniffing and Hubs

  - by Chris_K

  This will likely seem naive to the experts... but it has been on my mind lately. For years I've been using ntop and a cheap 4 port hub to sniff client networks to determine who's doing what -- and how much. Great way to see what's going on when they call and say "Geeze, the network seems really slow today." No need to bring in a managed switch (or access the existing one) and no need to configure spanning or mirroring. I just drop in the hub inline where I want to measure. Lately I noticed it is just about impossible to buy a real honest-to-goodness hub anymore. While looking for a new one, I had someone tell me that I should be sure to get a full-duplex hub or I'd only be seeing half the traffic when I monitor. Really? I've been using a crusty old Netgear DS104 all this time. No clue if it is half or FD. Have I really been understating my measurements? I'm just not bright enough about the physical layer to really know... Side note: Just ordered a Dualcomm Ethernet Switch TAP as a hub replacement. Seems like a nifty gadget. Any notes or tips about it would be welcome in the comments :-)

  Read the article

• how can i share my laptop 3g connection with another laptop using wifi?

  - by user23392

  Hello. i have an intel laptop with wifi running windows vista , and connected to internet using Huawei 3g key, can i share this connection using wifi with another laptop/device ? i can't find an Ad Hoc Wi-Fi Network option , maybe because i'm not using a wired connection. Any solution? Thanks

  Read the article

• Why does my computer not always automatically request a new DHCP lease when switching networks?

  - by KingJ

  I've noticed an interesting problem recently where my laptop will not automatically refresh my DHCP lease when changing between wireless networks. Instead, it will attempt to use the existing lease for the new network. Of course, since each network has different settings any connections will fail when using the old lease. While Windows will eventually request a new DHCP lease, it's often much faster for me to release the old lease and request a new, correct, lease. It puzzles me as to why this is not automatically done when associating to the network? One possible cause is that the laptop is put to sleep while connected to one network, then woken when in range of the other network. Nevertheless, I would expect that the lease would be renewed when the laptop associates to the other network rather than attempting to use the old lease. It should be noted that the two networks are completely different, both in terms of size, number of APs, network settings, SSIDs etc. One network is my home network and the other one is the campus-wide network at my University.

  Read the article

• Hyper-V can't connect from host to guest via RDC

  - by Mark

  As the title describes I would like to connect via Remote Desktop Connection to my VM. I want to use it as a Dev-machine and therefore would like to work full screen, as far as I understand RDC is the way to go. I have created an internal network connection within Hyper-V, assigned it to my VM, set a static IP/Subnet on guest (Win7 Pro) and host(Win8.1 Enterprise). It worked good for the first couple of times but now it seems to be broken or I have to do odd enable/disable network connection "dances" to get it running. Ping also doesn't work always so it does seem as if the guest and host would be "disconnected".. Is there something I can do so that the network connection always will be established?

  Read the article

• Remotely port forward/launch process or a client-less remote desktop app?

  - by DC177E

  I have an XP box running Logmein at a remote location behind a linksys router, which was running well for a whole of four days, until we had a power failure. Our ISP gave us a new IP, the machine restarted, and logmein did not autorun (or, at least, it did not automatically sign in), and our service (which may or may not be a Minecraft server with non-backed-up save files) also did not run upon startup. Logmein does not register the new IP (it still displays the old one). I have a DDNS updater service, so I do know the new dynamic address. I have tried using the built in XP remote desktop service, but, as with almost all non-cloud-based remote desktop services, it requires a port forward. Thus, I would appreciate it if anyone has any ideas as to: A: Any way of accessing our router remotely to forward the remote desktop port. I've seen the Remote Management option (forwarding the setup page to port 8080), but I do not have it enabled. I've tried UPnP, but again, the setup page for our router is not forwarded. B: Any way of remotely launching a process that does not require port forwarding (or uses ports 255XX, 18XXX, or 9000.), such as a remote console service built into XP. I realize this is a near impossibility. C: A Way to remotely start logmein, and sign in, which is likely a definite impossibility. Sorry if this is too specific for Stackexchange, or if I've put it into the wrong section (is SuperUser the correct place for this?). Ideas would, again be much appreciated, as shot-in-the-dark-like this may be.

  Read the article

• RV042 - how to broadcast UDP through VPN

  - by user47221

  I setup a gateway to gateway vpn connection with linksys RV042 router. i was able to ping each other, access file sharing ( with netbios enabled ). They are having same subnet mask 255.255.255.0, 192.168.1.0 <--- 192.168.2.0 Firewall disabled. But when i created/host LAN games (eg. warcraft3), it cannot be detect by clients at another site/LAN. As i know warcraft3 is using UDP broadcast to tell the client the game is creaetd. 1. How to broadcast UDP to another LAN ? any things to do with multicast ?

  Read the article

• Access Windows from Mac via Remote Dekstop Connection using hostname

  - by stevekuo

  I'm using Snow Leopard with Remote Desktop Connection attempting to access a Windows XP machine on a home network. If I specify the Windows PC's hostname it won't connect. Only by specifying the IP address does it connect. It's the same issue when trying to ping the Windows machine - IP address works, hostname doesn't. Both machines are on the same subnet connecting with a wireless router. Is there way to get OSX to resolve the Windows PC by its hostname?

  Read the article

• Setting up a home network

  - by Mat Richardson

  I'm trying to get my head around how to do this with the equipment I have. Here's how it is.. I have an old laptop that has server 2003 installed on it. This has no wireless NIC, but I have a spare wireless router that I can wire to it. We have a virgin wireless router which provides the home with internet access. What I would like to do it make resources on the server 2003 machine available to the rest of the devices in the home - specifically a couple of laptops running windows 7. Ideally I'd like to be able to use the laptop as a fileserver but maybe also offer application virtualization. In the first instance however, I'd like to create a file server with the laptop and allow connections to it by the other machines. Virtualisation is just a 'nice to have'... Given the hardware I have is this possible? Can you point me in the right direction how to do what I want if this is the case?

  Read the article

• No outbound internet connection after restarting CentOS 6.3

  - by wnstnsmth

  After restarting a headless CentOS 6.3 machine, it lost outbound internet connectivity, i.e. I can still connect to the server via SSH (ssh root@**.126.18.56), but stuff such as ping google.com gives google.com: unknown host, and yum list some_package gives a lot of network errors. This is what ifconfig gives: eth0 Link encap:Ethernet HWaddr 00:25:90:78:2D:5D inet addr:**.126.18.56 Bcast:**.126.18.255 Mask:255.255.255.0 inet6 addr: fe80::225:90ff:fe78:2d5d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:75594 errors:0 dropped:0 overruns:0 frame:0 TX packets:787 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7074741 (6.7 MiB) TX bytes:144391 (141.0 KiB) Interrupt:20 Memory:f7a00000-f7a20000 eth1 Link encap:Ethernet HWaddr 00:25:90:78:2D:5C UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:16 Memory:f7900000-f7920000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:504 (504.0 b) TX bytes:504 (504.0 b) I have absolutely no clue how to debug this, and I find it very strange since I can still connect via ssh. EDIT: Weirdly, /etc/resolv.conf does not contain any entries, or none that I can make sense of: # Generated by NetworkManager search sui-inter.net # No nameservers found; try putting DNS servers into your # ifcfg files in /etc/sysconfig/network-scripts like so: # # DNS1=xxx.xxx.xxx.xxx # DNS2=xxx.xxx.xxx.xxx # DOMAIN=lab.foo.com bar.foo.com So is it possible that rebooting the server erased that file? It worked before at least! And how do I solve this? By the way, pinging an IP address works.

  Read the article

• Public Wi-Fi and software updates

  - by coding4fun

  According to Microsoft, "Never update your software on a public Internet connection." So I have some questions. 1. What if a public Wi-Fi hotspot is the only Internet available, ever? Never update anything? 2. What happens if Windows or some other program is set to update automatically and attempts to do so while you are using a public Wi-Fi? Disable all automatic updates on all software? 3. Will VPN help to secure software updates? If so, how to go about it? Thanks.

  Read the article

• Avoiding QoS degradation for video streaming clients

  - by aarege31

  Suppose I have two routers connected via a 1Gbit connection. A client behind router 1 streams to a client behind router 2 while other clients behind router 1 transmit data to other clients behind router 2. Are there any best practice policing, scheduling or queue management algorithms available that help a beginner understand what is necessary to prevent QoS degration in simple cases as above as well as in real world environments?

  Read the article

• House Wiring for Ethernet/Coax/Power

  - by Adam Kragt

  Hoping this is the right place to post, the rest didn't seem to fit. If not, I apologize. Remodeling my house and want to wire up each room with Ethernet/coax wall ports. Both Ethernet, coax and power will be running through the sub-floor. I've read that there needs to be 2 ft between power cables and Ethernet to limit/prevent interference. Is this true? If not, does anyone know what the distance is? Thanks!

  Read the article

• VOIP and internet connection speeds [cable vs. fiber]

  - by microchasm

  Our office is migrating to IP telephony. We have less than 10 employees that will be using the phones. We currently have cable internet, and they just bumped the speeds: There is a data center that was just recently built in our building, and we were considering co-lo'ing there in the near future. As a result, they offered us access to their triple-redundant internet, but it's quite expensive. They are offering 3mbps committed with up to 10mbps burst for $250/month (discounted). We pay ~$120 for our cable (which the plan was to keep--at least for TV). I want the phone system and LAN to be as separate as possible. Was thinking about keeping the cable for LAN, and using the other connection for the phones (until I saw the price). Now I'm thinking it might make sense to add on to our existing cable setup, and change our phone to only have DSL as a backup for the cable. Is there any real benefit to the fiber? Especially for the price? Any other suggestions or ideas? Thanks.

  Read the article

• arp across subnets which devices can be detected?

  - by Gobliins

  i have some devices connected in the same physical network (LAN) but in different subnets. I want to detect them all with the ARP from my computer. My Computer is also in the same physical network but on a different subnet. ! The devices have no arp protocol installed (yet). Is it possible to detect the devices (with or withour ARP installed on every device)? If the devices have a MAC-address but no IP-address, can ARP still detect the machines?

  Read the article

• D-Link router WiFi and LAN segment

  - by StreetStrider

  I have D-Link 2650 router. Some wireless and wired clients connected to it. The problem is there is no interconnection between wireless and wired devices. For instance, when I start webserver on PC connected to wired LAN, WiFi devices cannot access it (other wired devices can). However all devices are in the same subnet: 192.168.1.x. How can I connect WiFi and LAN devices to one network? Or maybe what I should know first (any information with which I can proceed)?

  Read the article

• syslog log of TCP packet

  - by com

  Occasionally, I noticed a lot of following messsages in syslog Nov {datetime} hostname kernel: [8226528.586232] AIF:PRIV TCP packet: IN=eth0 OUT= MAC={mac} SRC={sourceip} DST={destinationip} LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=20361 DF PROTO=TCP SPT=39950 DPT=37 WINDOW=14600 RES=0x00 SYN URGP=0 On the Internet, I found that DOS attack may cause such type of output, unfortunately, I don't understand what does this log mean. The only thing is clear for me is this log is related to network. The source host is the host where nagios is installed. Does it mean nagios somehow does behave well? And what does it mean at all?

  Read the article

• How can I disable the network detection on Windows 7?

  - by Mad Scientist

  I have a computer running Windows 7 that shares some files on the network. This works fine for a while until for some unknown reason the computer decides that it is connected to a new, unknown public network and disables the file sharing capabilites. Nothing physically changes with the computer, it is still connected to the same network via ethernet cable. But it does misidentify the network every other day, just plugging out the ethernet cable and putting it back in leads Windows to correctly identify the work network and enabling the share again. Is there some way to stop Windows from trying to identify the network automatically, and just tell it that the network on that computer will never change?

  Read the article

• How can I make my laptop use a phone as a wi-fi adapter?

  - by Dennis Williamson

  I have an HP Pavilion dv6400 series laptop with an NVidea chipset which is the subject of a class action lawsuit. The symptom (PDF) that I'm experiencing is that the system fails to recognize that there is a wireless adapter installed. It doesn't appear in Device Manager. In this question, I ask if there's a way to work around this problem. As an alternative, I'd like to see if there's a way to use an old Windows Mobile 5 phone that does not have cellular service (voice or data) as a Wi-Fi adapter. How can this be accomplished? The system is running Windows Vista Home and has the latest BIOS (F42) and Windows updates and drivers.

  Read the article

• Connecting to network device behind NAT from local LAN using the external port and IP

  - by lumbric

  I noticed at several different LANs connected to the Internet through a NAT the following phenomena. There is a server in the LAN and there is a port forwarding to reach this server also from outside the LAN through the NAT. E.g. consider a LAN with the address 192.168.0.* and a SSH server at 192.168.0.2 with port 22 and a forwarding from port 2222 at the NAT 192.168.0.1 to 192.168.0.2:22. If the NAT's external IP is 44.33.22.11, one can connect to the SSH server through 44.33.22.11:2222. Surprisingly this works only from outside the LAN. If one tries to connect to 44.33.22.11:2222 from behind the NAT, there is no answer. Of course one could simply use 192.168.0.2:22, but often it is simpler to use the external IP. The typical use case for me is the configuration on a laptop computer. Usually the user uses any arbitrary Internet connection to connect to his home or office server, but sometimes he will use also the LAN to connect to it and it would be annoying to have to different configurations or bookmarks. Why does it fail to connect from inside the LAN? Is there any good work around?

  Read the article

• connecting 2 ubuntu computers as a lan

  - by Brendan Cutjar

  Hi i am trying to connect 2 ubuntu computers as a LAN. In my current setup I have: One machine running ubuntu 11.10 with Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller While the other machine is running Ubuntu 12.04 with an Atheros Communications Inc AR8152 v1.1 Fast Ethernet The two machines are connected via a switch (Edimax ES-3205P). Unfortunately I still cannot connect the two machines together. Can somebody please show me what to do and how to go about solving this issue?

  Read the article

• Sharing a printer on Windows home network

  - by Jeff

  I have a home network, and I'm trying to share a printer connected to one of the PCs. The wireless modem through which the internet comes through doesn't reach the entire house, so we have another router set up as well. The modem is 192.168.1.1 (let's call this A) and the router is set up as 192.168.1.100 (let's call this B). Subnet masks 255.255.255.0. The printer is hooked up to a PC on B. If my laptop is connected wirelessly to B, it can see the printer. However, if it's connected to A, it doesn't show up in My Network Places. How can I get it so that I can print to the printer regardless of whether the

  Read the article

• Sharing a printer on Windows home network

  - by Jeff

  I have a home network, and I'm trying to share a printer connected to one of the PCs. The wireless modem through which the internet comes through doesn't reach the entire house, so we have another router set up as well. The modem is 192.168.1.1 (let's call this A) and the router is set up as 192.168.1.100 (let's call this B). Subnet masks 255.255.255.0. The printer is hooked up to a PC on B. If my laptop is connected wirelessly to B, it can see the printer. However, if it's connected to A, it doesn't show up in My Network Places. How can I get it so that I can print to the printer regardless of whether the

  Read the article

• Connect a Sitecom WL-174 to another wireless router

  - by Thijs Wouters

  I used to connect via a Sitecom WL-174 directly to ADSL internet. There were some pc's which connected wirelessly and some connected with a wire. Now we got another provider and we need to use the router which came with it. It is also a wireless router. It works perfectly. But I need to connect the other pc's which were connected with a wire previously. Is it possible to connect the Sitecom router wirelessly to the other router? If so, how? Thanks.

  Read the article

• Poor TCP loopback throughput on Windows

  - by Yodan Tauber

  I measured the throughput of a locally bound TCP socket connection on my computer (Intel Q9550, 64 GB RAM, Windows XP 64 bit) using iperf. I got dissatisfying results (around 1.6 Gbit/s) each time, no matter how I tweaked the TCP settings (buffer length, window size, max segment size, no delay). I got similar results when I tried netperf. Now, I understand (from sources like these) that the average throughput of a loopback connection should be around 5 Gbit/s. What could be the reasons for such poor performance?

  Read the article

• How can I disable internet for a specific interface in Windows 7?

  - by MGSoto

  I have two NICs on my machine, one which connects to my network and has my internet connection. The other connects to a buddy next doors network with his internet connection. I don't want Windows magically deciding which internet connection to use, I want it to use mine. I've had some success by blanking out DNS servers for his connection, but then I also lose hostname resolution on his network and I realize this doesn't solve everything 100%. How can I force Windows to use only my connection while avoiding the use of a router?

  Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >