Search Results

Search found 28643 results on 1146 pages for 'go'.

Page 182/1146 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

• OpenVPN: ifup tap0 drops all connections

  - by raspi

  I'm trying to create star shaped "virtual" LAN with OpenVPN which is not connected to physical network. ie. tap0 packets should not go to eth0. Packet should only go through OpenVPN to connected clients. This setup works with my OpenVPN testing machine which runs Virtual Box but not on my actual server which is running on top of Xen. Both servers are running Ubuntu Intrepid. /etc/network/interfaces: iface tap0 inet manual address 10.10.10.1 netmask 255.255.255.0 gateway 10.10.10.1 /etc/openvpn/server.conf mode server tls-server port 1194 proto udp dev tap client-to-client ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/servername.crt key /etc/openvpn/easy-rsa/keys/servername.key dh /etc/openvpn/easy-rsa/keys/dh384.pem ifconfig-pool-persist ipp.txt server-bridge 10.10.10.1 255.255.255.0 10.10.10.128 10.10.10.250 push .route 10.10.10.1 255.255.255.0 keepalive 5 60 comp-lzo persist-key persist-tun status /var/log/openvpn-status.log log-append /var/log/openvpn.log verb 3 user nobody group nogroup ifup tap0 on Virtual Box: everything ok, SSH keeps running. But on Xen SSH connection drops and I have to reboot whole machine. What I'm missing?

  Read the article

• Outlook 2007, how to stop replies from being sent if they meet criteria

  - by CChriss

  I have my college's email account auto-forwarded (they don't offer pop3 or imap) to my main gmail account so I don't have to go to their website to check for mail. That gmail account, and others, use pop3 down to my Outlook 2007. In my Outlook, I have a rule that puts mail sent to my @college address into a folder named Collegemail. Since the college email system lacks pop3 or imap, I have to go to their site to send a reply, so that the reply will be sent from my @college email address. The problem is that I cannot seem to get into the habit of going to my college's website to reply to those emails, so quite often I reply to them while in Outlook, which means my replies are sent "from" my main gmail address. How can I set up Outlook to either 1) disable replying to emails in the Collegemail folder or to emails where my college email address is in the original To: line, or else 2) set it to send those replies from a non-functional dummy account. The dummy account would be unable to send the email so the email would be stuck in the Outbox. (I already have the non-functional dummy account set up as Outlook's "Default" account. When I compose a new mail I have to deliberately pick one of my good accounts to send the new mail with, or else Outlook uses the default dummy account and the email stays in the Outbox with a Send error.) Thanks. Update: Anybody? Please help.

  Read the article

• Multicast image restoration with adaptive speed

  - by Clinton Blackmore

  I'm curious to know if there are any tools for restoring disk images (or even transferring files) via multicast -- for any platform, especially if the project has source available -- where the multicast rate adjusts itself on the fly. On the Mac, all multicast solutions I am aware of (such as Deploy Studio, and NetRestore before it) make use of multicast ASR (apple software restore), which has one glaring deficiency -- you have to set the multicast speed before you start sending a disk image over the network, and that speed is locked in. Either your clients can keep up and restore, or they can't*. It seems to me that it must be possible for the multicast server to adjust the data rate, so you basically say "start sending this image", clients connect, and, if they can't keep up, they tell the server so it slows down. (Likewise, I'd expect the server to try speeding up if no client is having difficulties keeping up, and I'd expect to be able to cap that maximum throughput so that other network activities can go on without being resource starved.) So, what sort of tools are out there? For Linux? Windows? Is there something for the Mac I've overlooked. [It just kills me that it is true that, by the time you get multicast up and going at a good speed to restore a lab, you could've unicasted the data to all the computers and be done.] * There is a little leeway involved. I think individual clients can say, "I missed a little bit of data" and get it, and they can opt to listen in the next time the image is sent over the network, but on the whole, if they missed it the first go round, you have to image the machine again, and there is no time savings.

  Read the article

• I Made Wordpress Multisite. And Now Everything Doesn't Display Properly

  - by piratepartypumpkin

  I installed Ubuntu 10.4 then I installed Bitnami LAMP stack then I installed bitnami wordpress module then I tried to make the site into a multisite by following these instructions: http://wiki.bitnami.org/Applications/BitNami_WordPress_Multisite#How_to_add_several_WordPress_Multisite_blogs_with_different_domains.3f AND http://wiki.bitnami.org/Applications/BitNami_WordPress_Multisite I can elaborate if needed: I enabled multisite in my wp-config.php file. Then I created a network using the wordpress dashboard. I was given two blocks of text to copy and paste 1 block into my wp-config.php file and one into my .htaccess file. I did that and now I get this: When I go to my mywebsite.com I get this (this was there before I switched to multisite): If I go to mywebsite.com/wordpress I get this (this used to be a functioning wordpress theme): If I click on "My Blog" it redirects to 1mywebsite.com (where the "1" came from I have no idea) If I try to login by going to mywebsite.com/wordpress/wp-login I get this: and if I enter my user and password it redirects me to mywebsite.com/wp-login.php and gives me "Not Found" The requested URL /wp-login.php was not found on this server. NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /opt/lampstack-5.3.16-0/apps/wordpress ServerName mywebsite.com ServerAlias www.mywebsite.com </VirtualHost>

  Read the article

• How do I find information about a particular trojan? "W32/Smalltroj.XVGT", as reported by Norman

  - by Lasse V. Karlsen

  I tried checking the Norman antivirus page, Virus-descriptions, but sadly it seems Norman has intentionally obfuscated their search results (I tried clicking on W, and it seems they just list viruses with a W somewhere in the description, instead of more typical, all viruses with a name starting with a W.) Is there a common virus-list somewhere, or is it as I suspect, every antivirus manufacturer is free to come up with their own identification tags for each virus? Several "vshost32.exe" files, related to Microsoft Visual Studio 2008, has been quarantined on our server today, probably related to a test-deployment of some internal software. Some developer machines that have grabbed that latest version of our program has also had the same files quarantined. Now, these files should not have been deployed in the first case, so I'll be looking into that, but whenever any developer now builds a program locally and attempts to debug, the same file is placed in the build output directory, and promptly quarantined. Does anyone have any clues as to how I can go about verifying this before I pointedly ask the antivirus software to go take a hike on this particular virus? Edit: I've copied one of the quarantined files manually to a machine over the network that doesn't have antivirus installed, and compared the file on that machine with a local copy (on that machine) of the vshost32.exe template file, and they're bit-for-bit identical. I guess this is a false positive. I still would like to know if it would be possible for me to verify this in any other way though, since next time such a trojan might be reported in a compiled file that we won't have a pristine copy of.

  Read the article

• Can I replicate data between mySQL and SQL Server/SQL Azure?

  - by Ernest Mueller

  I have a replicated mySQL setup running happily on Amazon AWS, making user data available locally in various regions. Now I'm faced with an app that needs to go up on Microsoft Azure and I need to replicate the data over to there as well. So that's annoying. I am faced with several options: Replicate from mySQL to SQL Azure/SQL Server seems like it would be lovely - is this possible? I'd consider using a third party tool and paying $$ if I had to. We're not using anything complicated in the db feature set, it's just data in tables. Get mySQL working on Microsoft Azure - which seems really dicey at best. All the HOWTOs I can find say "this is possible but you really shouldn't try this for production apps." Go non-realtime and do syncs from mySQL to SQL Azure, which may be somewhat expensive and slower. Rip out all my mySQL on Amazon and use SQL Server there, which would make Baby Jesus cry. Has anyone gotten mySQL to SQL Azure/SQL Server replication or syncing working? Or have any other approaches (a NoSQL solution that replicates and might meet our but-we-need-to-join-some-tables needs that can easily be run on Amazon and Azure)?

  Read the article

• How do you automatically close 3rd party applications when LiberKey is shut down?

  - by NoCatharsis

  Within LiberKey, I have added my own portable applications that are not included within the LiberKey library. When you go into the Properties menu for the app in the LiberKey UI, the Advanced tab has an option for Autoexecute. This dropdown menu seems to have no visible effect, at least on my current installation. I found that I could right click within the primary GUI and select "Add software group", add all 3rd party applications, then go to the Advanced tab within THAT Properties screen and select Autoexecute - "Always on startup". This solved the problem for starting the apps when LiberKey starts. However, now I'm having the same issue when closing out LiberKey. I have created a new 3rd party app that calls the same .exe, but sends the Parameter "/close". I then went to the Advanced tab and selected Autoexecute - "Always on shutdown". Seems pretty logical right? But the apps will not close on LiberKey shutdown. I cannot handle the app close-outs in the same way with a software group, as I did with the startup issue because the Autoexecute drop-down does not have an "Always on shutdown" option. Unfortunately, many of the Q&A forums on liberkey.com are in French and I took Spanish in high school. Otherwise I've not been able to find a workable answer. Any suggestions?

  Read the article

• How to remap IPs visible from local machine to IPs visible from a machine I have SSH access to?

  - by gooli

  I'm so far out of my depth I don't even know what to google for. There's a server I can connect to via SSH. Via that server I can access other server on its subnet via SSH. What I want to do is be able to access the machines that server has access to directly. Say the server IP is 192.168.7.7 and is the only one in the 192.168.x.x range I have access to. I'd like to configure things in such a way that when I to access say 192.168.7.100 on my machine, the connection will go through an SSH tunnel I open to 192.168.7.7 and out to 192.168.7.100. I would like this to work for any port if at all possible. I know I can set an HTTP proxy and even a SOCKS proxy, but I'm wondering is there is a way to actually remap some of the IP my machine sees to IP only visible from the remote machine. What would this configuration be called? IS this NAT, VPN, IP2IP or something else? How can I set up this on a Windows client box that connects via SSH to a Linux box? Sounds to me like I need to set up some kind of filtering on the network driver or possibly a virtual NIC, but I'm not sure where to go next.

  Read the article

• Is there a way to determine which service (in svchost.exe) does an outgoing connection?

  - by fluxtendu

  I'm redoing my firewall configuration with more restrictive policies and I would like to determine the provenance (and/or destination) of some outgoing connections. I have an issue because they come from svchost.exe and go to web content/application delivery providers - or similar: 5 IP in range: 82.96.58.0 - 82.96.58.255 --> Akamai Technologies akamaitechnologies.com 3 IP in range: 93.150.110.0 - 93.158.111.255 --> Akamai Technologies akamaitechnologies.com 2 IP in range: 87.248.194.0 - 87.248.223.255 --> LLNW Europe 2 llnw.net 205.234.175.175 --> CacheNetworks, Inc. cachefly.net 188.121.36.239 --> Go Daddy Netherlands B.V. secureserver.net So is it possible to know which service does a particular connection? Or what's your recommendation about the rules applied to these ones? (Comodo Firewall & Windows 7) Update: netstat -ano & tasklist /svc help me a little but they are many services in one svchost.exe so it's still an issue. moreover the service names returned by "tasklist /svc" are not easy readable. (All the connections are HTTP (port 80) but I don't think it's relevant)

  Read the article

• Problem hosting server behing personal router

  - by Venkatesh Hodavdekar

  I recently bought the domain name lucidcontraptions.com and want to host the website from home. I have a D-Link router in which I have set up my personal virtual server correctly. My application server is Apache 2.2. The server works perfectly with the following settings: External IP: 207.172.xx.xx. Public port: 8888 Internal IP: 192.168.xx.xx. Private port: 80 If I go to 207.172.xx.xx:8888/ the server works perfectly and my Apache page shows up without any issues, both from inside the intranet as well as outside. This setting would not work out for me as I am not allowed port numbers in my DNS management. Now when I tweak the settings to the following: External IP: 207.172.xx.xx. Public port: 80 Internal IP: 192.168.xx.xx. Private port: 80 If I go to 207.172.xx.xx/ the server works perfectly and my Apache page shows up without any issues, BUT ONLY FROM INSIDE THE INTRANET. This page does not show up for people outside the intranet.

  Read the article

• Massive SQL issue shutting down our site.

  - by Pselus

  Our website has started timing out like crazy today. All of our clients are finding it unusable. The only error we can seem to trace down as a potential problem is this: SQLAllocHandle on SQL_HANDLE_DBC failed Error ASP Description Error Category Microsoft OLE DB Provider for ODBC Drivers I have no idea what it means or how to go about fixing it. Anyone ever encountered this error before? Currently, you can log in to our site, but then once you go to do anything else, you find yourself logged out or nothing happens. We have a lot of Ajax going on so the "nothing happens" probably has to do with the Ajax pages not loading properly due to logouts and so nothing displays to the user. Like I said, I'm at a loss. Anyone have any advice on this error? EDIT I realize that this isn't necessarily a programming question, but we are a small startup company that just yesterday started talking about how we need to get a backup server running. Apparently we talked about it too late. We don't have a DBA, just 2 mid level programmers trying their hardest to keep our clients happy. So please, if you have any assistance give it but please don't close my question right now. EDIT 2 Turns out we had something on our server running called "ServerMask" that makes our IIS server look like Apache to the outside world. Shutting it down fixed our issue. Still no idea why it was messing up but it was the problem apparently. Thanks to everyone who tried to help.

  Read the article

• Dell OpenManage On Ubuntu Server 12.04 Cannot Log In

  - by Austin

  I have a Dell Poweredge 2950 with 2X130GB and 2X2TB drives. I need to set them up in a RAID 1 array so that the 130GB Drives are mirrored and host the OS, while the 2TB drives are mirrored and are the content drives. So I go from 4 disks, down to two, one 130GB and one 2TB. I can do that in the BIOS RAID utility no problem. But I need to be able to manage the RAID arrays and be able to expand them WITHOUT shutting down the server. Now, to my understanding, openmanage will allow me to do that AND it runs on ubuntu. So I go and set it up and try to log into the web interface at and it will not let me log in. I have followed dell's guide to set up openmanage, even added the usernames to the files and permissions and such, however, cannot get it to let me log in or anything. I have reinstalled Openmanage several times, even reinstalled the OS three times, and nothing works. Google does not help either. It simply says login failed after hitting submit. Please Help

  Read the article

• How do you test your porn filter

  - by Zoredache

  For testing antivirus we have EICAR, for SPAM, we have GTUBE. Is there a standard site that is or should be included in blacklists that you can use for testing instead of going to your favorite porn site in front of your boss, the CEO, or someone else who feels that seeing such a site is an excuse for a sexual harassment suit? Update This is less about getting permission for me to test, though that answer is useful. I do have both permission and responsibility to actually make sure the filter is running. I am able test the filter is functioning with a netcat. Instead, I am hoping there is a standard domain name that is blocked by most/all filters for testing. I need to be able to share this with my boss and users. I need to be able to demonstrate what happens when someone go to a filtered page. I need to have a way to quickly prove to others that the filter is working without asking them to go to some site that will not cause grief if for some reason the filter is not working. If there isn't already a good domain for this purpose I may simply have to register a domain myself, and then add the domain to all the filters I am responsible for.

  Read the article

• USB External HDD NOT spinning down on Windows Vista / Windows 7

  - by Deepak

  I have 3 external 2.5" USB HDDs - all from different manufacturers and with different capacities. I also have access to multiple Windows Vista / Windows 7 / Windows XP computers. My problem is that with the Windows Vista and Windows 7 computers, the external USB drives DO NOT spin down when I do "Safely remove hardware". Windows will tell me that I can safely remove the device, but I can see (and feel the rotations of the disk when I touch the casing) that the disks are still spinning and NEVER spin down. They also never go into their suspended state (which is generally signaled with a slow flashing of the activity LED). However, with Windows XP, when I do "Safely remove hardware", I can see that the drives do indeed spin down without any issues and go into their respective suspended states. I notice that this behaviour is consistent across all my 3 drives and on different hardware. Has anybody else noticed the same issues? Is there any way we can have the same behaviour as Windows XP on Windows Vista and 7, because I feel on the long run, disconnecting the drives while they are still spinning will have a negative effect on their life span. Thanks, Deepak.

  Read the article

• What Wireless Router/ADSL Modem to get? N-band a must!!

  - by JJarava

  I'm looking for a Dual-N band Router OR ADSL Gateway and I'd like some recommendations. Situation: I have a 802.11b/g ADSL gateway provided by my telco, but the WIFI signal won't cover all the house (especially the living-room, so my tv-connected Mac Mini has poor to no internet access). So I'm looking to either replace the DSL modem with a N-enabled one, or to add a Router to the mix. I've had a modem+router setup for many years, and I know the advantatges (double NAT, double FW = more security) and issues (more complex to troubleshoot, two possible points of failure), so I'd rather live with a single (ADSL Gateway) device, if possible. Requirements: Dual-N Band (300 Mbs WIFI) 1 GB Ethernet ports ADSL2+ support (if it's a ADSL gateway, which would be desirable) "Best" range and speed possible Nice to have: USB port to share disks/printers on the network Media streaming I've been a long time user of Linksys, so googling around I found the WRT610N (http://www.linksysbycisco.com/US/en/products/WRT610N) for a "Pure Router" perspective, and it's one of those that Linksys styles "N++" (http://www.linksysbycisco.com/US/en/promo/Promotion-Go-Wireless?stepname=Promotion-Step-Go-Wireless-High-Performance) But I haven't been able to find similar "ADSL" gateways. I've found the WAG320N, but there is little to no info in the Linksys site (i.e., i don't know if it's Dual Band, or if it has GB ethernet) Any opinions/recommendations of other products/suggestions are more than welcome.

  Read the article

• Transpose matrix-style table to 3 columns in Excel

  - by polarbear2k

  I have a matrix-style table in excel where B1:Z1 are column headings and A2:A99 are row headings. I would like to convert this table to a 3 column table (column heading, row heading, cell value). It does not matter in what order the new table is. A B C D A B C A B C 1 H1 H2 H3 1 H1 R1 V1 1 H1 R1 V1 2 R1 V1 V2 V3 => 2 H1 R2 V4 or 2 H2 R1 V2 3 R2 V4 V5 V6 3 H1 R3 V7 3 H3 R1 V3 4 R3 V7 V8 V9 4 H2 R1 V2 4 H1 R2 V4 5 H2 R2 V5 5 H2 R2 V5 6 H2 R3 V8 6 H3 R2 V6 7 H3 R1 V3 7 H1 R3 V7 8 H3 R2 V6 8 H2 R3 V8 9 H3 R3 V9 9 H3 R3 V8 I've been playing around with the OFFSET function to create the whole table but I feel like a combination of TRANSPOSE and V/HLOOKUP is required. Thanks EDIT I have managed to come up with the correct formulas. If the data is in Sheet1 like in my example above, the formulas go in Sheet2: [A1] =IF(ROW() <= COUNTA(Sheet1!$B$1:$Z$1)*COUNTA(Sheet1!$A$2:$A$99), OFFSET(Sheet1!$A$1,0,IF(MOD(ROW(),COUNTA(Sheet1!$B$1:$Z$1))=0,COUNTA(Sheet1!$B$1:$Z$1),MOD(ROW(),COUNTA(Sheet1!$B$1:$Z$1)))),"") [B1] =IF(ROW() <= COUNTA(Sheet1!$B$1:$Z$1)*COUNTA(Sheet1!$A$2:$A$99),OFFSET(Sheet1!$A$1,IF(MOD(ROW(),COUNTA(Sheet1!$A$2:$A$99))=0,COUNTA(Sheet1!$A$2:$A$99),MOD(ROW(),COUNTA(Sheet1!$A$2:$A$99))),0),"") [C1] =IF(ROW() <= COUNTA(Sheet1!$B$1:$Z$1)*COUNTA(Sheet1!$A$2:$A$99),OFFSET(Sheet1!$A$1,IF(MOD(ROW(),COUNTA(Sheet1!$A$2:$A$99))=0,COUNTA(Sheet1!$A$2:$A$99),MOD(ROW(),COUNTA(Sheet1!$A$2:$A$99))),IF(MOD(ROW(),COUNTA(Sheet1!$B$1:$Z$1))=0,COUNTA(Sheet1!$B$1:$Z$1),MOD(ROW(),COUNTA(Sheet1!$B$1:$Z$1)))),"") The formulas are limited to B1:Z1 for the headings and A2:A99 for the rows (these can be increased to their maximums if required). The COUNTA() formula returns the number of cells that actually have values, which limits the number of rows returned to headings*rows. Otherwise the formulas would could go on for infinity because of the MOD function.

  Read the article

• 3 Servers, is this is a cluster?

  - by Andy Barlow

  Hello, At the moment I have one Ubuntu server, 9.10, running with a simple Samba share, a mail server, DNS server and DHCP server. Mostly its just there for file sharing and email server. I also have 2 other servers that are exactly the same hardware and spec as the first, which have an rsync set up to retrieve the shared folders and backs them up. However, if the first server goes down, all of our shares disappear along with our mail and the system must be rebuilt. Also I tend to find if people are downloading a large amount from the file server, no-one can access there emails - especially in the morning when everyone is signing in at once. Would it be more beneficial for me to have all 3 servers, all running the same services, doing the same thing with some sort of cluster with load balancing? I'm not really sure where to begin looking, or how to go about such a setup where 3 servers are all identical, but perhaps one acts as the main load balancer?? If someone can point me in the right direction, or if this simply sounds like one of those Enterprise Cloud's that is now a default setup in Ubuntu Server 9.10+, then I'll go down that route. Cheers in advance. Andy

  Read the article

• Homegroup should be working, but doesn't

  - by Tim

  I have Win7 installed on both my PC and laptop. When I choose to make a homegroup I can go through the steps of creating, getting password, then joining it from the other computer and it says that it all connects properly. But when I go to the homegroup tab it always says no other computers connected. If I look in the settings it will say "connected to suchandsuch homegroup" but the comps won't show. Also, on my PC, when I tick the boxes in the homegroup settings on what libraries I want to share, then click on save settings, it shuts down the settings window and when I re-open it the library tick boxes are all unticked again. Yet, I have had no problems with the tick boxes stayin ticked on the laptop. I have tried cancelling and remaking the homegroup, have tried making it on both computers, and have tried disabling and re-enabling the network connectors but it still won't work. At my old house we had 3 PCs running win 7 and 2 of them could homegroup together fine but mine never could as it was getting the same problem I am getting now. I feel like I am the only one on the planet with this problem. Can anybody help?

  Read the article

• How do I restart a Windows XP upgrade?

  - by Jason

  Is there a registry tweek to tell Windows Setup to start over? It tries to continue where it left off after I reboot. I can get to the Recovery Console. I tried to go from SP2-SP3. It failed, and I couldn't get to Safe Mode. I put in the SP1 disk (I don't have an SP2 boot disk, just the upgrade package.) It ran a couple minutes then gave me the error "the signature for windows xp professional upgrade is invalid" error code 800b0100. I rebooted to Safe Mode. I get to Safe Mode then say "Window XP Setup can't run under Safe Mode" press ok to restart. I put the SP3 disk back in, trying to get the "repair" option I didn't ever see putting in the SP1 disk, and it tried to continue the SP1 install - on the 4th step, and then gave the same signature error above. I need to get it to start over, so I can get to the repair option, to go back to SP2 (or install SP1 then add SP2 to it). Is there a registry tweek to tell Windows Setup to start over?

  Read the article

• How can I download a copy of an S3 public data set?

  - by tripleee

  i was naively assuming I could do something like s3cmd sync s3://snap-d203feb5 /var/tmp/copy but I seem to have the wrong idea of how to go about this. I cannot even get a simple thing to work; vnix$ s3cmd ls s3://snap-d203feb5 Bucket 'snap-d203feb5': ERROR: Bucket 'snap-d203feb5' does not exist I guess the identifier I have is not for a "bucket" but for a "public data set". How do I go from one to the other? Do I have to start up an EC2 instance and create a bucket for this? How? The instructions at http://docs.amazonwebservices.com/AWSEC2/latest/UserGuide/using-public-data-sets.html seem to assume I want to use the data in an EC2 instance, but in this case, I'd just like to browse a bit, at least for a start. By the by, copy/pasting the "US Snapshot ID" causes a nasty traceback from Python; they publish the ID with a weird Unicode (I presume) dash which cannot directly be copy/pasted. Is there a mistake when I copy it? And what's the significance of "US" in there? Can't I use the data outside North America??

  Read the article

• Repository bugzilla package changed to bugzilla3 in Lenny; upgradable?

  - by Pukku

  This question was asked in debianhelp.org almost half a year ago, but never got an answer. I wasn't the one who posted it, however I was today facing exactly the same question. Not sure if copying it to here as such is considered as inappropriate or something, but there's not really anything that I would even like to paraphrase... So let's just go. (I'm sure you will be happy to close it, if this is not the way to go :) Hello all! We are using a Bugzilla server install on a Debian 4/Etch server and are starting to look at the upgrade to Debian 5/Lenny. I was hoping to upgrade the existing Bugzilla server and database from the oldstable (v2.22) to the newer stable in Lenny (v3) when we get to doing a dist-upgrade. However from testing in a virtual machine it seems that the old package was called "Bugzilla" whereas the Lenny package is called "Bugzilla3" and I could not figure a way to directly upgrade between the two. Is it possible to establish some kind of upgrade path quickly after the dist-upgrade to minimise downtime using apt-get or aptitude? Going on past experiences I would not want to do a fresh install with the Bugzilla3 package and attempt to inject the old database into it (previous attempts failed miserably!) :(

  Read the article

• Ubuntu server or Debian server (to run C++ apps developed on Ubuntu)

  - by skyeagle

  I have written a number of C++ server side daemons for my website, using my Ubuntu 9.10 dev machine. The C++ apps I mentioned above are "GUI-less" daemons (and libraries used by the daemons). I am now about to host my website and need to decide whether to go with Debian server or Ubuntu server. In a nutshell, here is the situation: I developed on Ubuntu desktop because I preferred the more friendly GUI I would like to deploy on Debian Server because of the (perceived?) robustness of the Debian server over Ubuntu server (I may be totally wrong here - and in fact, this is really what this question is all about) If Debian server is indeed more robust than Ubuntu server, then I have no choice but to go with Debian server - BUT, will my Ubuntu developed C++ apps run on the server? (or do I need to recompile them on the server? (I'd HATE to have to do this, because I want to keep the server machine clean and light - no GUI, no dev tools etc). This last question is really about binary compatability between Ubuntu and Debian. I want the server to be robust, secure and stable, and simply act as a server (i.e. LAMP and very little else - no GUI etc). Given that requirement, and the fact that I need to run my C++ apps (developed on Ubuntu 9.10), I need advice on which OS to choose for the server. Ideally, any advice will be backed with a reason. I am particularly interested in hearing from people who have been in an identical situation, or done something similar.

  Read the article

• NTBackup Error: C: is not a valid drive

  - by Chris

  I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Reducing video mode switching during Linux boot

  - by Zack

  When I boot up my desktop computer, which only has Linux on it, the video mode and/or console font gets switched four times: When GRUB starts, it switches from 80x25 text to a graphical mode so it can draw a pretty background behind its menu; GRUB then goes back to 80x25 text after I pick something from the menu; When the KMS driver for my video card loads, it switches to a much higher-resolution text mode (I don't know if this is a hardware text mode or not); Finally X starts and it goes graphics and stays that way. I think this last switch does not change the resolution of the video mode, only the graphicalness. I'd like to get rid of as many of these mode switches as possible. Ideally, when GRUB takes over from the BIOS it would go directly to the same high-resolution text mode that the KMS driver selects, and the display would stay in that mode till X starts and brings up graphics. I am under the impression that this is possible by mucking with the kernel command line and/or the GRUB console module load parameters, but I don't know the details. GRUB 1.98+20100706, kernel 2.6.32.15 using Nouveau video drivers. Distro is Debian unstable. Please no answers that involve recompiling anything or cobbling together bleeding-edge kernel/driver combinations, I don't care enough about this to go to that much trouble. EDIT: Tobu suggests setting GRUB_GFXMODE to the full pixel resolution of the monitor, and GRUB_GFXPAYLOAD_LINUX=keep to avoid the mode switch after the menu goes away. This does part of what I want, but winds up being worse overall. There's no mode switch after the menu, but there's still a painfully-slow screen repaint (I should probably just give up on GRUB's gfxmode, it's waaaay too slow at 1920x1200). More seriously, there's now a double mode switch when nouveaufb loads, along with fun-looking error messages in dmesg [ 5.923798] [drm] nouveau 0000:02:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff8801ba5f4600 [ 5.923802] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver [ 5.923821] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 1 ("PFIFO_INTR" message repeats 400+ times) [ 5.925609] Console: switching to colour dummy device 80x25 [ 5.925802] Console: switching to colour frame buffer device 240x75

  Read the article

• PHP Script Won't Run - Apache2/MySQL Servers Running, PHP Installed - Ubuntu 10.04

  - by nicorellius

  I am trying to install a CRM on a Linux (Ubuntu 10.04) laptop to do some testing. Installing the current versions of Apache, MySQL and PHP, and getting the CRM to run is easy. It's when I try to go backwards and run it on a previous set of versions I run into problems. This is what I have done: I have installed Apache 2.2.14, MySQL 5.0.83, and PHP 5.2.8. When I type something like mysql --version I get back what I would expect: version and distribution info. The same goes for Apache2 and PHP. The Apache server is running and so is mysqld. So when I go to my browser and look at http://localhost/<CRM dir>/install.php Firefox offers to open the PHP file or save it, as if it doesn't recognize the file. What should happen is that I should get a welcome page and the installation wizard for this CRM distribution should start. I have tried so many different things I probably screwed up something along the way. I have restarted the servers over and over, and even recompiled the versions of MySQL and PHP with no problems. I am hoping I am overlooking something simple because I am lost. Any help is appreciated.

  Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >