Search Results

Search found 21963 results on 879 pages for 'lance may'.

Page 182/879 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

  • Laptop authentication/logon via accelerometer tilt, flip, and twist

    - by wonsungi
    Looking for another application/technology: A number of years ago, I read about a novel way to authenticate and log on to a laptop. The user simply had to hold the laptop in the air and execute a simple series of tilts and flips to the laptop. By logging accelerometer data, this creates a unique signature for the user. Even if an attacker watched and repeated the exact same motions, the attacker could not replicate the user's movements closely enough. I am looking for information about this technology again, but I can't find anything. It may have been an actual feature on a laptop, or it may have just been a research project. I think I read about it in a magazine like Wired. Does anyone have more information about authentication via unique accelerometer signatures? Here are the closest articles I have been able to find: Knock-based commands for your Linux laptop Shake Well Before Use: Authentication Based on Accelerometer Data[PDF] Inferring Identity using Accelerometers in Television Remote Controls User Evaluation of Lightweight User Authentication with a Single Tri-Axis Accelerometer Identifying Users of Portable Devices from Gait Pattern with Accelerometers[PDF] 3D Signature Biometrics Using Curvature Moments[PDF] MoViSign: A novel authentication mechanism using mobile virtual signatures

    Read the article

  • Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.

    - by Paul J. Warner
    I am having an issue with a program where after 6 mins +- 5 secs we get the above exception. Some more info about the exception stacktrace is below. This all happens pretty religiously, 6 mins goes by and bam the following 3 exeptions. We have the application installed in 2 other environments and it is working fine there. I am hoping to find some server settings either IIS 6 or Server 2003 settings that may be causing this issue to occur. I have reviewed some of the similar questions and don't see very many answers. I am hoping that maybe the information I have provided may help a little bit. 208741,Exception,,,,2011-06-21 00:30:14.193,SERVERNAME,2624,1,CLIENTNAME,The underlying connection was closed: An unexpected error occurred on a receive. , at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request) at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request) at Microsoft.Web.Services3.WebServicesClientProtocol.GetResponse(WebRequest request, IAsyncResult result) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208742,Exception,,,,2011-06-21 00:30:14.227,SERVERNAME,2624,1,CLIENTNAME,Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208743,Exception,,,,2011-06-21 00:30:14.287,SERVERNAME,2624,1,CLIENTNAME,An existing connection was forcibly closed by the remote host , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size),-691097507,62,1

    Read the article

  • Apache2 process stuck at 100% cpu, CLOSE_WAIT socket lingering

    - by mmazing
    I've troubleshooted the heck out of this today, and I can't seem to find any information on how to determine what is happening exactly. Basically, on my development server, another developer is causing CLOSE_WAIT connections that eat up one or more apache2 processes for several hours if I don't restart apache2. strace on any of the processes yields no information, only that it was able to attach. mod_proxy is not enabled. KeepAlive is on, KeepAliveTimeout is 15 seconds, MaxKeepAliveRequests is 100. From what I've been reading, this may or may not be an apache issue at all, just that that's how CLOSE_WAIT works (the server is waiting for a FIN packet to close the connection). I just can't believe that a server would be crippled so easily by not receiving a packet from a remote host telling it to close the connection. Especially without any intervention for well over an hour. Any tips? I'm about to pull my hair out. Edit : Also, there are no unusual entries in any apache log files. Edit 2: lsof -i shows only a single CLOSE_WAIT per hanging process. (That's what has been bothering me about this, as most other discussions talk about many CLOSE_WAIT connections, while I only have one per process.) The nature of the code that is running (php) doesn't really lend itself to closing open connections and whatnot. I can run the same code that he is executing with the same session data, and not result in a hanging process.

    Read the article

  • Kubuntu: apt-get install of php5-dev: libtool version mismatch?

    - by pinkgothic
    (Warning, clueless-newbism ahead.) Background info: I'm actually trying to install/upgrade xdebug. sudo pecl install xdebug yields: downloading xdebug-2.0.5.tgz ... Starting to download xdebug-2.0.5.tgz (289,234 bytes) ............................................................done: 289,234 bytes 67 source files, building running: phpize sh: phpize: not found ERROR: `phpize' failed A quick google tells me that phpize is a part of a package called php5-dev, so off I ran to install that. My problem is that using sudo apt-get install php5-dev fails with this output: sudo apt-get install php5-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: php5-dev: Conflicts: libtool (>= 2.2) but 2.2.6a-4 is to be installed E: Broken packages 2.2.6a-4 is greater than 2.2, so I'm not sure why it's hanging itself up at that point. I'm guessing the fact that it's not entirely numeric is throwing apt-get off? I can probably install xdebug manually (though I've never done this before, so picture me with a deer clueless-newb in headlights look here, violently shaking my head and begging for a simpler solution) rather than via pecl / aptitude, but is there a way I can make aptitude install php5-dev despite the bogus 'broken package' claim? Is it even bogus, or am I misreading the error message? Alternatively: Could I install phpize in some other way (e.g. via pear or pecl)?

    Read the article

  • Kubuntu: apt-get install of php5-dev: libtool version mismatch?

    - by pinkgothic
    (Warning, clueless-newbism ahead.) Background info: I'm actually trying to install/upgrade xdebug. sudo pecl install xdebug yields: downloading xdebug-2.0.5.tgz ... Starting to download xdebug-2.0.5.tgz (289,234 bytes) ............................................................done: 289,234 bytes 67 source files, building running: phpize sh: phpize: not found ERROR: `phpize' failed A quick google tells me that phpize is a part of a package called php5-dev, so off I ran to install that. My problem is that using sudo apt-get install php5-dev fails with this output: sudo apt-get install php5-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: php5-dev: Conflicts: libtool (>= 2.2) but 2.2.6a-4 is to be installed E: Broken packages 2.2.6a-4 is greater than 2.2, so I'm not sure why it's hanging itself up at that point. I'm guessing the fact that it's not entirely numeric is throwing apt-get off? I can probably install xdebug manually (though I've never done this before, so picture me with a deer clueless-newb in headlights look here, violently shaking my head and begging for a simpler solution) rather than via pecl / aptitude, but is there a way I can make aptitude install php5-dev despite the bogus 'broken package' claim? Is it even bogus, or am I misreading the error message? Alternatively: Could I install phpize in some other way (e.g. via pear or pecl)?

    Read the article

  • What's up with stat on Macos/Darwin? Or filesystems without names...

    - by Charles Stewart
    In response to a question I asked on SO, Give the mount point of a path, one respondant suggested using stat to get the device name associated with the volume of a given path. This works nicely on Linux, but gives crazy results on Macos 10.4. For my system, df and mount give: cas cas$ df Filesystem 512-blocks Used Avail Capacity Mounted on /dev/disk0s3 58342896 49924456 7906440 86% / devfs 194 194 0 100% /dev fdesc 2 2 0 100% /dev 1024 1024 0 100% /.vol automount -nsl [166] 0 0 0 100% /Network automount -fstab [170] 0 0 0 100% /automount/Servers automount -static [170] 0 0 0 100% /automount/static /dev/disk2s1 163577856 23225520 140352336 14% /Volumes/Snapshot /dev/disk2s2 409404102 5745938 383187960 1% /Volumes/Sparse cas cas$ mount /dev/disk0s3 on / (local, journaled) devfs on /dev (local) fdesc on /dev (union) on /.vol automount -nsl [166] on /Network (automounted) automount -fstab [170] on /automount/Servers (automounted) automount -static [170] on /automount/static (automounted) /dev/disk2s1 on /Volumes/Snapshot (local, nodev, nosuid, journaled) /dev/disk2s2 on /Volumes/Sparse (asynchronous, local, nodev, nosuid) Trying to get the devices from the mount points, though: cas cas$ df | grep -e/ | awk '{print $NF}' | while read line; do echo $line $(stat -f"%Sdr" $line); done / disk0s3r /dev ???r /dev ???r /.vol ???r /Network ???r /automount/Servers ???r /automount/static ???r /Volumes/Snapshot disk2s1r /Volumes/Sparse disk2s2r Here, I'm feeding each of the mount points scraped from df to stat, outputing the results of the "%Sdr" format string, which is supposed to be the device name: Cf. stat(1) man page: The special output specifier S may be used to indicate that the output, if applicable, should be in string format. May be used in combination with: ... dr Display actual device name. What's going on? Is it a bug in stat, or some Darwin VFS weirdness? Postscript Per Andrew McGregor, try passing "%Sd" to stat for more weirdness. It lists some apparently arbitrary subset of files from CWD...

    Read the article

  • Postfix Problem (helo/hostname mismatch)!

    - by CuSS
    Hi all, I have a server, and it is running a error for one email only (all other mails in that domain are working). How can i fix it? (The error is above:) May 17 11:43:56 webserver postfix/policyd-weight[5596]: weighted check: IN_DYN_PBL_SPAMHAUS=3.25 NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 DSBL_ORG=ERR(0) CL_IP_NE_HELO=4.75 RESOLVED_IP_IS_NOT_HELO=1.5 HELO_NUMERIC=10.625 (check from: .eticagest. - helo: .[10.0.0.17]. - helo-domain: .17].) FROM_NOT_FAILED_HELO(DOMAIN)=6.25; <client=188.80.139.211> <helo=[10.0.0.17]> <[email protected]> <[email protected]>; rate: 21.875 May 17 11:43:56 webserver postfix/policyd-weight[5596]: decided action=550 Mail appeared to be SPAM or forged. Ask your Mail/DNS-Administrator to correct HELO and DNS MX settings or to get removed from DNSBLs; MTA helo: [10.0.0.17], MTA hostname: bl15-139-211.dsl.telepac.pt[188.80.139.211] (helo/hostname mismatch); <client=188.80.139.211> <helo=[10.0.0.17]> <[email protected]> <[email protected]>; delay: 6s

    Read the article

  • Uninstall IIS on Windows 7

    - by CJM
    I've just rebuilt my development machine and installed IIS. I then installed the Web Deployment tool and used this to restore my previously-backed-up websites to the clean machine. Unfortunately the restoration didn't work correctly/fully. I couldn't easily correct the problem, so I decided to uninstall/reinstall IIS and recreate the sites manually. I uninstalled IIS and rebooted, but there was still plenty of stuff left around such as various files in /windows/system32/inetsrv/ which I tried to delete manually (with limited success!). I rebooted again and tried to reinstall IIS - it reported an error (no meaningful message) and requested another reboot. The event log includes the following errors: The World Wide Web Publishing Service (WWW Service) did not register the URL prefix http://*:80/gallery for site 1. The site has been disabled. and Unable to bind to the underlying transport for [::]:80. The IP Listen-Only list may contain a reference to an interface which may not exist on this machine. I'd like to avoid another rebuild. Can I completely remove IIS, such that I can reinstall it from scratch? Or can I 'fix' the current setup so that IIS will reinstall over what is already there?

    Read the article

  • Restrict SSH user to connection from one machine

    - by Jonathan
    During set-up of a home server (running Kubuntu 10.04), I created an admin user for performing administrative tasks that may require an unmounted home. This user has a home directory on the root partition of the box. The machine has an internet-facing SSH server, and I have restricted the set of users that can connect via SSH, but I would like to restrict it further by making admin only accessible from my laptop (or perhaps only from the local 192.168.1.0/24 range). I currently have only an AllowGroups ssh-users with myself and admin as members of the ssh-users group. What I want is something that works like you may expect this setup to work (but it doesn't): $ groups jonathan ... ssh-users $ groups admin ... ssh-restricted-users $ cat /etc/ssh/sshd_config ... AllowGroups ssh-users [email protected].* ... Is there a way to do this? I have also tried this, but it did not work (admin could still log in remotely): AllowUsers [email protected].* * AllowGroups ssh-users with admin a member of ssh-users. I would also be fine with only allowing admin to log in with a key, and disallowing password logins, but I could find no general setting for sshd; there is a setting that requires root logins to use a key, but not for general users.

    Read the article

  • Accounting setup in freeradius with mikrotik and the "always" module

    - by Matt
    I have a freeradius setup that is being used to provide authentication for users on a wireless network. The access points are all Mikrotik hardware and the users are connected 24/7. We've been using Daloradius with mysql and freeradius 2. The boss wants to use the accounting information and while this is all set up and appears to be working, I've found that not all the accounting information is present. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly. So he started poking around at this link: http://wiki.mikrotik.com/wiki/RouterOs_MySql_Freeradius#Configuring_RouterOs_for_Radius_.26_PPP.2A_AAA And was looking specifically at the following section. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } However, that link references freeradius 1 and I can't find this in the radius.conf file for freeradius 2. What does it do and could it be a reason I'm missing data? EDIT: I have found one issue. We have a backup freeradius server that is also receiving the accounting packets. Although they are replicating, it's only a master/slave configuration. If the slave receives accounting packets it won't replicate them back to the master. Although I suspect this might solve it, the boss is not convinced due to the always module. Is there anything special I need to configure in the mikrotik AP's or freeradius 2 for clients connected 24/7.

    Read the article

  • Installing Silverstripe on 000webhost.com (free web host)

    - by benwad
    Hi I'm trying to learn how to work Silverstripe so I extracted the tar file to my free hosting account. I then went on install.php and edited the permissions to meet the requirements set out in install.php but I still get two warnings from the 'webserver configuration' section: I can't tell what webserver you are running. Without Apache I can't tell if mod_rewrite is enabled. I can't tell whether mod_rewrite is running. You may need to configure a rewriting rule yourself. I looked in phpinfo() and mod_rewrite appears to be installed. I contacted the web host and they said it was to do with virtual directory paths, and I should add 'RewriteBase /' to the top of my .htaccess file in the public_html directory. However I did this and still had the same problem. The install.php script says that I can install it even with these warnings but when I press 'install' it just refreshes the install.php page. It doesn't even overwrite the .htaccess file. 000webhost.com says they have successfully installed Silverstripe on their user accounts without much configuration but I can't seem to find out how. EDIT: I managed to get to the next page but now there is another warning which is stopping it installing: Friendly URLs are not working. This is most likely because mod_rewrite isn't configuredcorrectly on your site. Please check the following things in your Apache configuration; you may need to get your web host or server administrator to do this for you: * mod_rewrite is enabled * AllowOverride All is set for your directory I also get this error message from the server: Warning: unlink(mysite/_config.php) [function.unlink]: Permission denied in /home/a2716553/public_html/install.php on line 701

    Read the article

  • Issues installing apache debian

    - by Belgin Fish
    I'm having issues installing apache2, and pretty much everything in general, I'm using debian. I run sudo apt-get install apache2 and then it returns root@debian:~# apt-get install apache2 Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: apache2 : Depends: apache2-mpm-worker (= 2.2.16-6+squeeze7) but it is not going to be installed or apache2-mpm-prefork (= 2.2.16-6+squeeze7) but it is not going to be installed or apache2-mpm-event (= 2.2.16-6+squeeze7) but it is not going to be installed or apache2-mpm-itk (= 2.2.16-6+squeeze7) but it is not going to be installed Depends: apache2.2-common (= 2.2.16-6+squeeze7) but it is not going to be installed E: Broken packages Not really sure what's up :S Seems like it can't find any of the required packages for anything, Anyone know what I'm doing wrong?

    Read the article

  • Apache2 - rewrite a bunch of specified pathname URLs to one URL

    - by James Nine
    I need to rewrite a bunch of urls (about 100 or so) for SEO purposes, and there may be more being added in the future (probably another 50-100 later on). I need a flexible way of doing this and so far, the only way I can think of is to edit the .htaccess file using the rewrite engine. For example, I have a bunch of urls like this (please note that the query string is irrelevant, and dynamic; it could be anything. I was only using them purely as an example. I am only focusing on the pathname--the part between the hostname and query string, as marked in bold below): http://example.com/seo_term1?utm_source=google&utm_medium=cpc&utm_campaign=seo_term http://example.com/another_seo_term2?utm_source=facebook&utm_medium=cpc&utm_campaign=seo_term http://example.com/yet_another_seo_term3?utm_source=example_ad_network&utm_medium=cpc&utm_campaign=seo_term http://example.com/foobar_seo_term4 http://example.com/blah_seo_term5?test=1 etc... And they are all being rewritten to (for now): http://example.com/ What's the most efficient/effective way of doing this so that I may be able to add more terms in the future? One solution I came across is to do this (in the .htaccess file): RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ / [NC,QSA] However, the problem with this solution is that even invalid urls (such as http://example.com/blah) will be rewritten to http://example.com instead of giving a 404 code (which is what it is supposed to do anyway). I'm still trying to figure out how all this works, and the only way I can think of is to write 100 more RewriteCond statements (such as: RewriteCond %{REQUEST_URI} =/seo_term1 [NC,OR]) before the RewriteRule directive. For example: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} =/seo_term1 [NC,OR] RewriteCond %{REQUEST_URI} =/another_seo_term2 [NC,OR] RewriteCond %{REQUEST_URI} =/yet_another_seo_term3 [NC,OR] RewriteCond %{REQUEST_URI} =/foobar_seo_term4 [NC,OR] RewriteCond %{REQUEST_URI} =/blah_seo_term5 [NC] RewriteRule ^(.*)$ / [NC,QSA] But that doesn't sound very efficient to me. Is there a better way?

    Read the article

  • Re-sizing disk partition linux/vm

    - by Tiffany Walker
    I VM Player running a linux guest and I was wanting to know how do I expand the disk? In the VM player I gave more disk space but I am not sure how to mount/expand/connect the new disk space to the system. My old disk space was 14GB [root@localhost ~]# df -h / Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root 14G 4.5G 8.2G 36% / Then I expanded it and now I see sda2 which is the new space? [root@localhost ~]# fdisk -l Disk /dev/sda: 128.8 GB, 128849018880 bytes 255 heads, 63 sectors/track, 15665 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000cd44d Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 2611 20458496 8e Linux LVM Disk /dev/mapper/VolGroup-lv_root: 14.5 GB, 14537457664 bytes 255 heads, 63 sectors/track, 1767 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/VolGroup-lv_swap: 6408 MB, 6408896512 bytes 255 heads, 63 sectors/track, 779 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Do I need to mount the new space first? resize2fs -p /dev/mapper/VolGroup-lv_root 108849018880 resize2fs 1.41.12 (17-May-2010) The containing partition (or device) is only 3549184 (4k) blocks. You requested a new size of 1474836480 blocks. resize2fs -p /dev/mapper/VolGroup-lv_root 128849018880 resize2fs 1.41.12 (17-May-2010) resize2fs: Invalid new size: 128849018880 [root@localhost ~]# lvextend -L+90GB /dev/mapper/VolGroup-lv_root Extending logical volume lv_root to 103.54 GiB Insufficient free space: 23040 extents needed, but only 0 available [root@localhost ~]# lvextend -L90GB /dev/mapper/VolGroup-lv_root Extending logical volume lv_root to 90.00 GiB Insufficient free space: 19574 extents needed, but only 0 available EDIT: So after trying pvcreate/vgextend nothing has so far worked. I'm guessing the new disk space added from VM Player is not showing up? pvscan PV /dev/sda2 VG VolGroup lvm2 [19.51 GiB / 0 free] Total: 1 [19.51 GiB] / in use: 1 [19.51 GiB] / in no VG: 0 [0 ]

    Read the article

  • How to enable error log in lighttpd properly?

    - by Tomaszs
    I have a Centos 5 system with Lighttpd and fastcgi enabled. It does log access but does not log errors. I have Internal Server Error 500 and no info in log and when I try to open not -existing file also - no info in error log. How to enable it properly? Below is list of modules that I've enabled: server.modules = ( "mod_rewrite", "mod_redirect", "mod_alias", # "mod_access", # "mod_cml", # "mod_trigger_b4_dl", # "mod_auth", "mod_status", "mod_setenv", "mod_fastcgi", # "mod_webdav", # "mod_proxy_core", # "mod_proxy_backend_fastcgi", # "mod_proxy_backend_scgi", # "mod_proxy_backend_ajp13", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) Here are setting of debugging: ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" debug.log-file-not-found = "enable" #debug.log-condition-handling = "enable" Setting of path to error and access log: ## where to send error-messages to server.errorlog = "/home/lxadmin/httpd/lighttpd/error.log" #### accesslog module accesslog.filename = "/home/lxadmin/httpd/lighttpd/ligh.log" Settings of fastcgi: fastcgi.debug = 1 fastcgi.server = ( ".php" => (( "bin-path" => "/usr/bin/php-cgi", "socket" => "/tmp/php.socket", "max-procs" => 12, "bin-environment" => ( "PHP_FCGI_CHILDREN" => "2", "PHP_FCGI_MAX_REQUESTS" => "500" ) ))) And in included config file I have: server.errorlog = "/home/httpd/mywebsite.com/stats/mywebsite.com-error_log" What comes to log files: /home/httpd/mywebsite.com/stats/ -rw-r--r-- 1 apache apache 5173239 May 16 11:34 mywebsite.com-custom_log -rwxrwxrwx 1 root root 0 Mar 27 2009 mywebsite.com-error_log /home/lxadmin/httpd/lighttpd/ -rwxrwxrwx 1 apache apache 2184 Apr 22 22:59 error.log -rwxrwxrwx 1 apache apache 6088621 May 16 11:26 ligh.log I gave error logs chmod 777 for a try to check if it's the issue, but apparently it's not. So my question is: what to do to have error log enabled?

    Read the article

  • Apache virtualhost - only apply script if file does not exist in document root

    - by Brett Thomas
    Sorry for the newbie apache question. I'm wondering if it's possible to set up the following non-conventional apache virtualhost (for a Django app): -- If a file exists in the DocumentRoot (/var/www) it will be shown. So if /var/www/foo.html exists, then it can be seen at www.example.com/foo.html. -- If file does not exist, it is served via a virtualhost. I'm using mod_wsgi with a WSGIScriptAlias directive that points to a Django app. So if there is no /var/www/bar.html, www.example.com/bar.html will be passed to the Django app, which may or may not be a 404 error. One option is to create an Alias for each individual file/directory, but people want to be able to post a file without adding an alias, and we want to keep the above URL structure for legacy reasons. Simplified Virtualhost is: <VirtualHost *:80> ServerName www.example.com DocumentRoot /var/www WSGIScriptAlias / /path/to/django.wsgi <Directory /path/to/app> Order allow,deny Allow from all </Directory> Alias /hi.html /var/www/hi.html </VirtualHost> The goal is to have www.example.com/hi.html work as above, without the Alias line

    Read the article

  • Usb device not working properly on a Thinkpad T60

    - by Xavierjazz
    I have just started getting a message that a USB device is not working properly. This is on a new Thinkpad T60 running Windows XP Professional SP3. I have had all devices attached for about 10 days or so. When I go to device manager there is no sign of a problem: everything is working correctly. I am unable to find out which device it is. I searched this forum but the only reference I found was to older computers which may not be Usb2 capable. This is not my problem. Any ideas? Thanks. EDIT: I realized I had a harddrive attached but turned off. Although I could not track down any error messages except the balloon that came up, I have disconnected it and, so far, no messages. We'll see over the next day or two, but this may be the problem. Thanks EDIT: This has not solved the problem. I get the message that one of the USB devices has malfunctioned and it points to "USB root hub (2 ports)" and shows an unused port and an unknown device. However, when I check my device manager, it says that there are no problems, everything is working as it should. ?? EDIT: I now found the event log view and there are 2 types of error messages. They do not relate to the time that I get the balloon. 2 of the 3 are "Ati2mtag" errors and the third is "System Control Manager". Are these related to my problem, and the balloon just pops up randomly? EDIT: well, I'm still having the problem, and have narrowed it down to a malfunctioning device. Thanks to all.

    Read the article

  • Google Chrome sync: limit for bookmarks & extensions?

    - by Lyubomyr Shaydariv
    Actually, Chrome is my favorite web-browser, and one of its most powerful features is synchronizing the actual data into a Google account. For the last years I gained a lot of bookmarks and from time to time browse the extensions gallery to find new valuable ones. Really, synchronizing between my work and home PC's freed me from manual sync. And for the recent months I experience strange glitches. I guess it may be caused by a lot of stored bookmarks (potentially about 3K [in estimate], but please don't ask why :)) and extensions (about 130 installed but only 10-15 daily used). I can mention the following strange things: Recently added bookmarks sometimes are not synchronized (e.g. I put a bookmark at work, but it's not guaranteed I can see it that evening), despite about:sync indicates a good sync process. Sometimes recently modified bookmarks appear in either (let's call) last at home or last at work bookmark folders. Sometimes bookmarks are not synced at all. (Moreover, Chromium versions may even crash) Extensions are not synced now at all. Perhaps, there's another reason, but Google Mail Checker and Google Reader Notifier do not show indicators of incoming e-mails and news. ... I'm not sure but it looks like I might exceed Chrome internal sync limits... Is it right? Are there any workarounds, or should I make a massive bookmarks/extensions cleanup (I really don't want it :()? I mostly use Google Chrome Canary builds, and the my current one is 12.0.732.0. Thanks in advance. Update #1 (2001-04-19): I removed about 50 extensions that I'm not interested in (or that I consider as trash), and gained pretty some results: The extensions count is below 100 (exactly 97); The chrome://extensions page does not get slow (or even frozen) any more on enabling/disabling/uninstalling extensions; The extensions are seem to be synchronized now again.

    Read the article

  • How do hdparm's -S and -B options interact?

    - by user697683
    These two options seem confusing. For example: according to the man page -B 254 "does not permit spin-down". However, testing with -B 254 -S 1 the drive does spin down after 5 seconds. -B Query/set Advanced Power Management feature, if the drive supports it. A low value means aggressive power management and a high value means better performance. Possible settings range from values 1 through 127 (which permit spin-down), and values 128 through 254 (which do not permit spin-down). The highest degree of power management is attained with a setting of 1, and the highest I/O performance with a setting of 254. A value of 255 tells hdparm to disable Advanced Power Management altogether on the drive (not all drives support disabling it, but most do). -S Put the drive into idle (low-power) mode, and also set the standby (spindown) timeout for the drive. This timeout value is used by the drive to determine how long to wait (with no disk activity) before turning off the spindle motor to save power. Under such circumstances, the drive may take as long as 30 seconds to respond to a subsequent disk access, though most drives are much quicker. The encoding of the timeout value is somewhat peculiar. A value of zero means "timeouts are disabled": the device will not automatically enter standby mode. Values from 1 to 240 specify multiples of 5 seconds, yielding timeouts from 5 seconds to 20 minutes. Values from 241 to 251 specify from 1 to 11 units of 30 minutes, yielding timeouts from 30 minutes to 5.5 hours. A value of 252 signifies a timeout of 21 minutes. A value of 253 sets a vendor-defined timeout period between 8 and 12 hours, and the value 254 is reserved. 255 is interpreted as 21 minutes plus 15 seconds. Note that some older drives may have very different interpretations of these values.

    Read the article

  • Why can't I get rid of default index.html even if I disable the default virtual host in Apache2?

    - by Emre Sevinç
    I have created a virtual host settings file and I disabled the default settings by using a2dissite default (this is a pretty standard Ubuntu 10.04 installation). But no matter what I try my Apache2 server simply keeps on displaying the default index.html page instead of the index.php page that I set up in the virtual host file. Can someone help me what I'm missing. Details follow: No default settings: ls -l /etc/apache2/sites-enabled/ total 0 lrwxrwxrwx 1 root root 51 May 5 13:32 webmin.1273066327.conf -> /etc/apache2/sites-available/webmin.1273066327.conf lrwxrwxrwx 1 root root 34 May 30 11:03 www.accontax.be -> ../sites-available/www.accontax.be Contents of the relevant virtual host: cat /etc/apache2/sites-enabled/www.accontax.be <VirtualHost *> ServerName www.accontax.be ServerAlias accontax.be DirectoryIndex index.php DocumentRoot /var/www/drupal/ <Directory /var/www/drupal/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> Contents of httpd.conf: cat /etc/apache2/httpd.conf Listen 80 NameVirtualHost * I also have those relevant lines in my apache2.conf: # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ When I visit http://www.accontax.be I expect apache2 server go to the /var/www/drupal subdirectory and start serving index.php but it simply keeps on serving index.html from /var/www directory. I have reloaded the configuration, restarted the server, deleted my browser cache. Nothing changed. Probably I'm missing a simple yet crucial step but I just could not find it.

    Read the article

  • Installing SilverStripe on 000webhost.com (Free web host)?

    - by benwad
    Hi I'm trying to learn how to work Silverstripe so I extracted the tar file to my free hosting account. I then went on install.php and edited the permissions to meet the requirements set out in install.php but I still get two warnings from the 'webserver configuration' section: I can't tell what webserver you are running. Without Apache I can't tell if mod_rewrite is enabled. I can't tell whether mod_rewrite is running. You may need to configure a rewriting rule yourself. I looked in phpinfo() and mod_rewrite appears to be installed. I contacted the web host and they said it was to do with virtual directory paths, and I should add 'RewriteBase /' to the top of my .htaccess file in the public_html directory. However I did this and still had the same problem. The install.php script says that I can install it even with these warnings but when I press 'install' it brings me to a page with the following errors: Friendly URLs are not working. This is most likely because mod_rewrite isn't configuredcorrectly on your site. Please check the following things in your Apache configuration; you may need to get your web host or server administrator to do this for you: * mod_rewrite is enabled * AllowOverride All is set for your directory I also get this error message from the server: Warning: unlink(mysite/_config.php) [function.unlink]: Permission denied in /home/a2716553/public_html/install.php on line 701 000webhost.com says they have successfully installed Silverstripe on their user accounts without much configuration but I can't seem to find out how.

    Read the article

  • Automated Scanning for Corrupted Archive Files

    - by Synetech inc.
    Hi, I have all kinds of files that I have downloaded from everywhere over the years scattered around my hard drives. I’m in the process of trying to organize them all and have run into a problem. Sometimes a file was not downloaded correctly (this was a big issue when Chromium first came out) and is thus corrupt. For media files, this is relatively simple to determine (it requires actually opening and examining the file). For executables or other binaries, it is relatively difficult (executables may or may not crash, other binaries could be completely unknown). Archive files (eg zip, rar, 7z, exe, ace, etc.) however should be pretty simple, they have a built-in corruption detection facility. My problem now is that I really don’t want to open and test each and every single archived file throughout my drive; that would be a nightmare. I’m looking for a utility that can automate the process. Is there a program that can scan archive files on a drive and list the ones that are corrupt? Thanks a lot.

    Read the article

  • Docs for OpenSSH CA-based certificate based authentication

    - by Zoredache
    OpenSSH 5.4 added a new method for certificate authentication (changes). * Add support for certificate authentication of users and hosts using a new, minimal OpenSSH certificate format (not X.509). Certificates contain a public key, identity information and some validity constraints and are signed with a standard SSH public key using ssh-keygen(1). CA keys may be marked as trusted in authorized_keys or via a TrustedUserCAKeys option in sshd_config(5) (for user authentication), or in known_hosts (for host authentication). Documentation for certificate support may be found in ssh-keygen(1), sshd(8) and ssh(1) and a description of the protocol extensions in PROTOCOL.certkeys. Is there any guides or documentation beyond what is mentioned in the ssh-keygen man-page? The man page covers how to generate certificate and use them, but it doesn't really seem to provide much information about the certificate authority setup. For example, can I sign the keys with an intermediate CA, and have the server trust the parent CA? This comment about the new feature seems to mean that I could setup my servers to trust the CA, then setup a method to sign keys, and then users would not have to publish their individual keys on the server. This also seems to support key expiration, which is great since getting rid of old/invalid keys is more difficult then it should be. But I am hoping to find some more documentation about describe the total configuration CA, SSH server, and SSH client settings needed to make this work.

    Read the article

  • Pure Terminal Server 2003 system hangs

    - by Donovan
    System Profile: IBM Server hardware Windows Ent Server 2003 running terminal services. No Citrix. Max user load: 30 Symptoms: While in the course of normal operation our terminal server will hang up. As far as I can tell there isn't any trigger that's plainly visible yet. The way in witch it hangs may give a clue though. The hang presents its self by users not being able to initiate any new processes. All processes currently loaded into memory work just fine. Example: outlook 2007. You may continue to read email, operate the client and such. Some people don't even realize the hang has occurred for a bit of time. My attempts to troubleshoot have been futile. Reacting to the hang does no good because I can't start any new processes to investigate. After I reboot the server my next instinct would be to begin logging to catch the hang occurring but I'm not sure what to log. Right now I'm attempting to keep process explorer running in case the issue occurs again. Sometimes it happens twice a day, other times, once a week. Anyone have any ideas on how I could set myself up for better success in tracking this problem down? Thanks, Donovan

    Read the article

  • NTBackup Error: C: is not a valid drive

    - by Chris
    I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >