Search Results

Search found 53243 results on 2130 pages for 'net cf'.

Page 1827/2130 | < Previous Page | 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834  | Next Page >

• Linux route add between static LAN and Wifi Gateway

  - by Hamza

  I have two local machines connected to each other via wired ethernet and one of those machines is also connected to a wifi network which provides internet access. A pseudo-graphical representation of the topology is as follows: (PC2)----------(PC1)---------(Wifi Gateway) 192.168.2.x 10.0.0.x The configuration on PC2 is: iface eth0 inet static address 192.168.2.2 network 192.168.2.0 netmask 255.255.255.0 gateway 192.168.2.1 ...and the configuration on PC1 is: iface eth0 inet static address 192.168.2.1 network 192.168.2.0 netmask 255.255.255.0 gateway 192.168.2.1 On PC1, I've added a default route for wlan0 as I couldn't access the internet otherwise: route add default gw 10.0.0.1 wlan0 And also tried setting the gateway for the 192.168.2.x network using: route add -net 192.168.2.0 netmask 255.255.255.0 gw 10.0.0.1 But I still can't access internet from PC2. Edit I don't have access to the wifi gateway.

  Read the article

• Internet Explorer 6 Encountered An Error ntl.dll Issue on XP and Win2000

  - by Gary B2312321321

  As we have some PC's still running Windows 2000 and this is beyond our control we use IE 6 so we can keep the IE platform standard. Recently on some XP and Win2000 PCs IE has been crashing with the Encountered a Problem and Needs to close do you want to send a message to Microsoft error when entering some sites. This happens even after a format reinstall with minimal software load (Office 2000, some avaya software, kaspersky, tapiex.dll). The module pointed to in the error report is ntl.dll. There are lots of reports over the net of the problem but has anyone resolved this issue? (Latest IE6 updates are installed). Also please note there were no 3rd party IE addons, spyware, viruses or adware Hope someone can help.

  Read the article

• Where can I find drivers for Fujitsu Scansnap fi-5110 for Windows 7 x64

  - by Tone

  I have a Fujitsu scanner that I cannot get working on Windows 7 x64. I have downloaded both the TWAIN and ISIS x64 drivers from the fujitsu website but Windows still does not recognize. I have tried it out using GIMP and Paint.net, neither program sees the scanner. I have also tried the fi-5000N Configuration Tool from Fujitsu but to no avail. Anyone know what drivers i need to install? Here's the info on the back of the scanner: Model: Fi-5110E0X2 Part No: PA03360-B015 Serial No: 026132 Date: 2005-09

  Read the article

• I'm receiving an SSL error in various browsers, but I can't find non-SSL content

  - by Scott Vercuski

  I'm receiving an error with my SSL connection. Using google chrome I see the following error: Your connection is encrypted with 128-bit encryption ... however this page includes other resources which are not secure I've scoured the source code, scripts and rendered code in the browser but cannot find where an http:// call is made. I've also used Fiddler2 to examine the traffic and everything is coming across via HTTPS. Has anyone run into this issue before and if so how did you go about finding the culprit. The website is running ASP.NET MVC3 in C#. The page in question is a simple payment page. The only external call is the google analytics tracking code. The page appears to load correctly, all images and scripts are in place.

  Read the article

• Getting live traffic/visitor analytics when using a reverse proxy

  - by jotto

  I'm in process of implementing Varnish as a reverse proxy for a Ruby on Rails app and I'm using Google Analytics (JS/client side script to record visitor data) but it's several hours delayed so its useless for knowing what's going on now. I need at a glance live data that includes referring traffic and what current req/sec is. Right now I am using a simple Rack middleware application to do the live stats (gist.github.com/235745) but if the majority of traffic hits Varnish, Rack will never be hit so this won't work. The closest solution I've found so far is http://www.reinvigorate.net/ but it's in beta (there are also no implementation details on their front page). Does Varnish have traffic logs that I can custom format to match my Apache logs so I can combine them, or will I have to roll my own JS implementation like GA that shows the data in real time?

  Read the article

• HTTP 401 Challenge and HTTP 302 Login/Redirect won't work together in IIS7

  - by RandomBen

  I am developing a website using .NET 3.5 that allow users to visit the site and create logins using the standard Microsoft login controls. However, users do not need to login to do general things like view products. Now I need to setup the site so some of our Traveling Sales people are able to access it but not allow anyone else to access it. The easiest way I know how to do this is to turn on Windows Authentication for the Site in IIS7. When I do that I get all sorts of errors due to also having Forms Authentication turned on. If I turn Forms Auth then I get a different kind of error. Does anyone know how to make Forms Auth and Windows Auth play nice on a single site in IIS7 or some other way to create a required login without having me kill Forms Auth?

  Read the article

• Not able to save Global navigation - SharePoint 2007

  - by Ryan

  I have migrated my sitecollection(migsitecollection) to different farm using content deployment job. http://vsmoss/sites/migsitecollection I used collaboration portal to create it.Its working fine from where I migrated it but after running content deployment jobs my new migrated site global navigation settings are not getting saved when I am trying ot change them by going in settings-Navigation and in logs I can see this error The SPNavigation store is likely corrupt. I saw on net the solution for this problem is changing onet.xml and running script on sql database for the site, I am eager to better answer than this but if its the same I have few doubts on it: First,As my site template is not customised its the collobartion portal so I am not sure where exactly to change the onet.xml. Second, I am using the same database as of my webapplication running that script would not affect anything else on the main site of mine?

  Read the article

• What to do if I can't ping my DNS?

  - by Moshe Lewin

  On my Windows XP SP3 machine I can only browse (with any browser) by putting in an ip address. If I put in any domain name it doesn't work. Skype and IM work. In command prompt nslookup works to resolve the name to an ip address, but ping does not work using a domain name, only using the ip address. Other computers on the same network can surf the net normally without any problems. I am not using a proxy. I already reset winsock and tcpip stack to no avail. Can anyone help me solve the problem?

  Read the article

• MSDeploy - possible to call setAcl on multiple destinations in one go?

  - by growse

  I'm building a nice little continuous integration environment for our development team, based on TeamCity. It's working rather nicely, as it can build a mix of .NET and PHP projects, and push them to our internal and external platforms. I'm primarily using MsDeploy to push everything to the internal platform, as that's all IIS based. However, there's a number of builds where I need to set directory permissions on the destination directory. I can use the setAcl operator just fine, but that only seems to take a single destination as an argument. Therefore, if I need to alter the permissions on 5 destination directories, I need to call MsDeploy 5 times, which seems a lot of overhead. Is there a sensible way around this? Reading the documentation, I don't think MsDeploy takes more than a single argument for the setAcl operator, but could be wrong. Is there a better way for a build server to set multiple directory permissions in one go?

  Read the article

• Sharepoint Services 3.0: 403 Forbidden fun

  - by gravyface

  Can't get to the Administration or the "companyweb" site itself; was working up to a week ago. Old threads, blog posts, etc. indicate that there was an issue with a KB update but was resolved when .NET Framework 2.0 SP1 was deployed/installed. Running Process Monitor, I can see a lot of PATH NOT FOUND','NAME NOT FOUND for c:\inetpub\companyweb\Default.aspx, \_themes\ice\...\foo.css, etc. for the w3wp.exe process on CreateFileorQueryOpenoperations. These files do not exist in the location specified. I don't recall these files actually existing in that folder, but I believe they're "created" when requested, pulled in from Common Files/Shared or whatever, in typically-awesome Microsoft Web architecture land (</rant>). Besides reinstalling (which I'm sure will be as much fun as migrating from one server to another was), anyone know what's going on? Google-fu has alluded me.

  Read the article

• HOWTO Catch/Redirect all outgoing e-mails on Win2K and Redhat Enterprise

  - by John

  Background: I am integrating two separate web application that are developed in ASP .NET and JSP/Struts. As such, they are hosted on two different server technologies, namely Win2K3 and Redhat Enterprise Server 5.5. Problem: There is a copy of production data in my test environment with real e-mail addresses. I need to test the e-mail functionality of these applications, but I do not want them to send out actual e-mails. Is there a way to catch and redirect all outgoing e-mails? Ideally, I would like to send all outgoing e-mails to another e-mail (i.e., [email protected]) so my testers can look at them. Thanks for the help in advance!

  Read the article

• Setup routing and iptables for new VPN connection to redirect **only** ports 80 and 443

  - by Steve

  I have a new VPN connection (using openvpn) to allow me to route around some ISP restrictions. Whilst it is working fine, it is taking all the traffic over the vpn. This is causing me issues for downloading (my internet connection is a lot faster than the vpn allows), and for remote access. I run an ssh server, and have a daemon running that allows me to schdule downloads via my phone. I have my existing ethernet connection on eth0, and the new VPN connection on tun0. I believe I need to setup the default route to use my existing eth0 connection on the 192.168.0.0/24 network, and set the default gateway to 192.168.0.1 (my knowledge is shaky as I haven't done this for a number of years). If that is correct, then I'm not exactly sure how to do it!. My current routing table is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface MSS Window irtt 0.0.0.0 10.51.0.169 0.0.0.0 UG 0 0 0 tun0 0 0 0 10.51.0.1 10.51.0.169 255.255.255.255 UGH 0 0 0 tun0 0 0 0 10.51.0.169 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 0 0 0 85.25.147.49 192.168.0.1 255.255.255.255 UGH 0 0 0 eth0 0 0 0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0 0 0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 0 0 0 After fixing the routing, I believe I need to use iptables to configure prerouting or masquerading to force everything for destination port 80 or 443 over tun0. Again, I'm not exactly sure how to do this! Everything I've found on the internet is trying to do something far more complicated, and trying to sort the wood from the trees is proving difficult. Any help would be much appreciated. UPDATE So far, from the various sources, I've cobbled together the following: #!/bin/sh DEV1=eth0 IP1=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 192.` GW1=192.168.0.1 TABLE1=internet TABLE2=vpn DEV2=tun0 IP2=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 10.` GW2=`route -n | grep 'UG[ \t]' | awk '{print $2}'` ip route flush table $TABLE1 ip route flush table $TABLE2 ip route show table main | grep -Ev ^default | while read ROUTE ; do ip route add table $TABLE1 $ROUTE ip route add table $TABLE2 $ROUTE done ip route add table $TABLE1 $GW1 dev $DEV1 src $IP1 ip route add table $TABLE2 $GW2 dev $DEV2 src $IP2 ip route add table $TABLE1 default via $GW1 ip route add table $TABLE2 default via $GW2 echo "1" > /proc/sys/net/ipv4/ip_forward echo "1" > /proc/sys/net/ipv4/ip_dynaddr ip rule add from $IP1 lookup $TABLE1 ip rule add from $IP2 lookup $TABLE2 ip rule add fwmark 1 lookup $TABLE1 ip rule add fwmark 2 lookup $TABLE2 iptables -t nat -A POSTROUTING -o $DEV1 -j SNAT --to-source $IP1 iptables -t nat -A POSTROUTING -o $DEV2 -j SNAT --to-source $IP2 iptables -t nat -A PREROUTING -m state --state ESTABLISHED,RELATED -j CONNMARK --restore-mark iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j CONNMARK --restore-mark iptables -t nat -A PREROUTING -i $DEV1 -m state --state NEW -j CONNMARK --set-mark 1 iptables -t nat -A PREROUTING -i $DEV2 -m state --state NEW -j CONNMARK --set-mark 2 iptables -t nat -A PREROUTING -m connmark --mark 1 -j MARK --set-mark 1 iptables -t nat -A PREROUTING -m connmark --mark 2 -j MARK --set-mark 2 iptables -t nat -A PREROUTING -m state --state NEW -m connmark ! --mark 0 -j CONNMARK --save-mark iptables -t mangle -A PREROUTING -i $DEV2 -m state --state NEW -p tcp --dport 80 -j CONNMARK --set-mark 2 iptables -t mangle -A PREROUTING -i $DEV2 -m state --state NEW -p tcp --dport 443 -j CONNMARK --set-mark 2 route del default route add default gw 192.168.0.1 eth0 Now this seems to be working. Except it isn't! Connections to the blocked websites are going through, connections not on ports 80 and 443 are using the non-VPN connection. However port 80 and 443 connections that aren't to the blocked websites are using the non-VPN connection too! As the general goal has been reached, I'm relatively happy, but it would be nice to know why it isn't working exactly right. Any ideas? For reference, I now have 3 routing tables, main, internet, and vpn. The listing of them is as follows... Main: default via 192.168.0.1 dev eth0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1 Internet: default via 192.168.0.1 dev eth0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1 192.168.0.1 dev eth0 scope link src 192.168.0.73 VPN: default via 10.38.0.205 dev tun0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1

  Read the article

• Trying to set up OpenVPN server on a vps

  - by Austin

  I'm trying to set up an OpenVPN server on my VPS for myself when I'm in public places, using this tutorial, http://tipupdate.com/how-to-install-openvpn-on-ubuntu-vps/ However whenever I try to start the server, it gives me this, root@vps:~# /etc/init.d/openvpn start * Starting virtual private network daemon(s)... * Autostarting VPN 'server' [fail] The log contains this Tue Dec 11 10:53:32 2012 Diffie-Hellman initialized with 1024 bit key Tue Dec 11 10:53:32 2012 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Tue Dec 11 10:53:33 2012 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue Dec 11 10:53:33 2012 ROUTE: default_gateway=UNDEF Tue Dec 11 10:53:33 2012 Note: Cannot open TUN/TAP dev /dev/net/tun: No such file or directory (errno=2) Tue Dec 11 10:53:33 2012 Note: Attempting fallback to kernel 2.2 TUN/TAP interface Tue Dec 11 10:53:33 2012 Cannot allocate TUN/TAP dev dynamically Tue Dec 11 10:53:33 2012 Exiting So obviously it's something to do with the tun, but I don't understand how to fix it. Thanks!

  Read the article

• How to load tun module in linux?

  - by rabipelais

  I cannot manage to load the tun module in my archlinux box. I'm trying to connect with openvpn, but the log says nm-openvpn[6662]: Note: Cannot open TUN/TAP dev /dev/net/tun: No such device (errno=19) lsmod | grep tun returns nothing. If I run sudo modprobe tun it returns failure, but no error message, and lsmod still has no tun. The module seems to exist, as there is a tun.ko.gz in /lib/modules/....... I really dont know what else to try. Thanks in advance

  Read the article

• Nagios3 gives a warning on HTTP service monitoring

  - by Dez

  Already set up my local net configuration to be monitored by Nagios3. I found a problem that Nagios3 reports a warning in the HTTP monitoring service of a Debian server set at ip 192.168.1.52, that has an individual virtual host and a mass virtual host for application development. I get this status message: HTTP WARNING: HTTP/1.1 404 Not Found I used the Nagios tools to check. servername is the name of the vhost server name I used in the Apache configuration. /usr/lib/nagios/plugins/check_http -H servername -I 192.168.1.52 receiving this status message: HTTP OK HTTP/1.1 200 OK - 37900 bytes in 0.504 seconds |time=0.503946s;;;0.000000 size=37900B;;;0 But when I check like this: /usr/lib/nagios/plugins/check_http -I 192.168.1.52 I get the same status message as the warning, so I assume that I don't have Nagios completely well set up because doesn't recognize the vhosts for that server, how it should be as the check_http service shows. Where should I look to fix that warning?

  Read the article

• Openfire: Closing session due to incorrect hostname

  - by cvista

  I have a fresh install on a windows sevrer 2008 box. I can connect adium to the server from a remote machine and from the admin console/sessions I can see my session. My friend can aslo connect and I can see his session. I can send an admin message out and both of us can see it in the adium clients. We can't see each other though. I also get these logs in the warn window in the log viewer: Closing session due to incorrect hostname in stream header. Host: prjatk.com. Connection: org.jivesoftware.openfire.net.SocketConnection@1b1fd9c socket: Socket[addr=/109.109.248.82,port=56258,localport=5269] session: null prjatk.com is the server - however in the server settings on the admin screen I see the computer name as the hostname - is that the issue? If so how can I change that?

  Read the article

• Windows 2003 shutdown instead of reboot

  - by The_cobra666

  Hi all, I've got a very strange problem. On the net I can only find problems with Server 2003 pc's, that reboot instead of shutting down, but in my case... (go figure) it does the opposite. When I choose to reboot, the system shutdown. Yes I am sure I used the reboot button. It happens via start == reboot and it happens when clicking on the reboot button when the update's have been installed. Nothing changed to the system's hardware. Only update's have been installed on the system. I did notice something odd in the logs when rebooting: Description: Timed out sending notification of target device change to window of "C:\WINDOWS\Explorer.EXE" KB: http://support.microsoft.com/kb/924390 They talk about a removable drive, but in my case, it's explorer.exe :s it appears 4 times. OS: Windows Server 2003 R2. Services: AD, DNS, DHCP, WSUS. Thanks in advance! Greetings from Belgium Shane

  Read the article

• Sql Server 2008, Active Directory Groups, and Failed Logins

  - by Ryan Michela

  I keep getting a Login Failed error in my ASP.net application when connecting to my SQL Server 2008 database. I am trying to login with the user domain\foo. When I grant a database login (server and database level) for domain\foo, my application can connect. When I put domain\foo in a group called domain/goo and give domain\goo a database login, the user domain\foo cannot authenticate. This does not make any sense. Am I doing something wrong? domain\foo and domain\goo are configured identically. The only difference is that on is a user and one is a group containing a user. Adding active directory groups as users to SQL Server 2008 is supposed to work.

  Read the article

• Hotmail account

  - by SysPrep2010

  Hello members of server fault. I just sign up today, and I see there is a lot of smart people here. So I would like to pick your brains LOL. First I am having this problem. I have an lenovo t500 laptop. with window 7 and microsoft office 2007. I looked at doucments on the net, of my issue and nothing worked. I am trying to add hotmail account in my outlook 2007. Can someone help me Thanks.

  Read the article

• Hotmail account

  - by sysprep2010

  I sent this to serverfault, but one of the guys sent it here . So I am retyping this Hello members of server fault and superuser. I just sign up today, and I see there is a lot of smart people here. So I would like to pick your brains LOL. First I am having this problem. I have an lenovo t500 laptop. with window 7 and microsoft office 2007. I looked at doucments on the net, of my issue and nothing worked. I am trying to add hotmail account in my outlook 2007. Can someone help me Thanks.

  Read the article

• Hotmail account

  - by sysprep2010

  Hello members of server fault. I just sign up today, and I see there is a lot of smart people here. So I would like to pick your brains LOL. First I am having this problem. I have an lenovo t500 laptop. with window 7 and microsoft office 2007. I looked at doucments on the net, of my issue and nothing worked. I am trying to add hotmail account in my outlook 2007. Can someone help me Thanks.

  Read the article

• Why does the Java VM process eat up more RAM then specified in -Xmx parameter?

  - by evilpenguin

  I have multiple servers running CentOS 5.4 and only one application running on Java VM. I've configured the Java VM with the following arguments: java -Xmx4500M -server -XX:+UseConcMarkSweepGC -XX:+CMSIncrementalMode -XX:NewSize=1024m -Djava.net.preferIPv4Stack=true -Dcom.sun.management.jmxremote=true The machines I'm running the VM on has 6 GB RAM and no other applications running. After a while, the java process starts to hit the swap space really hard, I get this info out of the top command: 7658 root 25 0 11.7g 3.9g 4796 S 39.4 67.3 543:54.17 java On the other hand, if I connect via JConsole, it reports the Java VM has 2.6 GB used, 4.6 GB commited and 4.6 Gb max. java -version returns: java version "1.6.0_17" Java(TM) SE Runtime Environment (build 1.6.0_17-b04) Java HotSpot(TM) 64-Bit Server VM (build 14.3-b01, mixed mode) Why is the Java VM expanding so much past it's allocated heap size? And where does that memory go, if it's not reported in JConsole?

  Read the article

• How to install Oracle's exp / imp binaries

  - by Sotapanna

  I was browsing the net to find a solution, but I had no luck. :( How can I install Oracle's imp / exp binaries to my CentOS box without installing an Oracle Server? I'm accessing an existing Oracle database on another machine, so I only need a client here. I already installed sqlplus and its dependencies (oracle-instantclient11.2-basic-11.2.0.3.0-1.x86_64.rpm, and oracle-instantclient11.2-odbc-11.2.0.3.0-1.x86_64.rpm), but that didn't provide those tools. Do I really need to fully install Oracle? My aim is to suck a database dump from the Oracle to my CentOS box. If there is another way to do this without using exp I wouldn't feel bad about NOT using it, but it seems to me there is no alternative.

  Read the article

• Simulating an UNC path with a leading dot

  - by Uwe Keim

  Being a C# .NET Windows Forms developer, some customers are running our applications on an Apple OS X Mac inside a Parallels virtual machine. Parallels presents host folders to the guest Windows as UNC paths with a leading dot like \\.psf\Home\Some\More\Folders Now an application of us cannot handle the leading dot correctly when accessing files from these kind of shares ("Invalid URI, cannot analyze host name" exception). I want to debug and fix this issue, unfortunately I do have no Mac and Parallels around here to test it. My question is: Is there a way to "simulate" this kind of share on a normal Windows server or client so that I'll be able to debug my application with Visual Studio? What I tried so far: I already tried to edit my HOSTS file to contain an entry like # ... 127.0.0.1 .psf # ... but Windows just seems to not recognize the share at all.

  Read the article

• Dovecot ignoring maximum number of IMAP connections

  - by Michelle

  I have a single mailbox mail server running Dovecot/Postfix and I have two IMAP clients, Thunderbird on the PC and K9 on Android. I keep on receiving this error in my logs even after I change the 'mail_max_userip_connections' variable to 50. puppet dovecot: imap-login: Maximum number of connections from user+IP exceeded (mail_max_userip_connections=10): user=<[email protected]>, method=PLAIN, rip=62.242.90.2, lip=198.29.31.229, TLS Why does it say that it is set to 10 in the log? Is that hardcoded? grep -r "mail_max_userip_connections" /etc/dovecot /etc/dovecot/conf.d/20-managesieve.conf: #mail_max_userip_connections = 10 /etc/dovecot/conf.d/20-pop3.conf: #mail_max_userip_connections = 3 /etc/dovecot/conf.d/20-imap.conf: mail_max_userip_connections = 50 I've restarted dovecot after making the changes but this error is still logged and I can't access the mailbox. Can anyone help me understand why I can't seem to raise the maximum limit?

  Read the article

< Previous Page | 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834  | Next Page >