Search Results

Search found 18160 results on 727 pages for 'jdk 7 feature complete'.

Page 183/727 | < Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >

• Partner Blog: Hub City Media Introduces iPad Application for Oracle Identity Analytics

  - by Tanu Sood

  About the Writer:Steve Giovannetti is CTO of Hub City Media, Inc., a company that specializes in implementation and product development on the Oracle Identity Management platform. Recently, Hub City Media announced the introduction of iPad application IdentityCert for Oracle Identity Analytics. This post explore the business use cases and application of IdentityCert.Hub City Media(HCM) has been deploying certification solutions based on Oracle Identity Analytics since it first appeared on the market as Vaau RBACx. With each deployment we've seen the same pattern repeat time and time again:1. Customers suffering under the weight of manual access certification regimens deploy Oracle Identity Analytics (OIA) for automated certification. 2. OIA improves the frequency, speed, accuracy, and participation of certifications across the organization. 3. Then the certifiers, typically managers and supervisors, ask, “Is there any easier way to do these certifications offline?”The current version of OIA has a way to export certification data to a spreadsheet.  For some customers, we've leveraged this feature and combined it with some of our own custom code to provide a solution based on spreadsheet exports and imports.  Customers export the certification to Microsoft Excel, complete it, and then import the spreadsheet to OIA. It worked well for offline certification, but if the user accidentally altered the format of the spreadsheet, the import of the data could fail. We were close to a solution but it wasn’t reliable.Over the past few years, we've seen the proliferation of Apple iOS devices, specifically the iPhone and iPad, in the enterprise.  As our customers were asking for offline certification, we noticed the same population of users traditionally responsible for access certification, were early adopters of the iPad. The environment seemed ideal for us to create an iPad application to support offline certifications using Oracle Identity Analytics. That’s why we created IdentityCert™.IdentityCert allows users to view their analytics dashboard, complete user certifications, and resolve policy violations with OIA, from their iPads.The current IdentityCert analytics dashboard displays the same charts that are available in the Oracle Identity Analytics product. However, we plan to expand the number of available analytics in future releases.The main function of IdentityCert is user certification which can be performed quickly and efficiently using a simple touch interface. Managers tap into a certification, use simple gestures to claim users and certify their access.  Certifications can be securely downloaded to IdentityCert and can be completed with or without a network connection. The user can upload the completed certifications once they are connected to a cellular or wi-fi network.Oracle Identity Analytics can generate policy violation notifications based on detective scans of identity warehouse or via preventative analysis of identity access requests. IdentityCert allows users to view all policy violations, resolve, or delegate them to appropriate users. IdentityCert also analyzes the policy violation expression and produces more human friendly descriptions of the policy violation which improves the ability of users to resolve the violation. IdentityCert can be deployed quickly into a customer's environment. It is deployed with Hub City Media's ID Services to connect Oracle Identity Analytics securely with the iPad application.Oracle Identity Management 11g R2 is an important evolutionary release. Oracle's Identity Management suite has more characteristics of a cohesive platform. This platform provides an integrated set of identity services that can be used to protect, manage, and audit security within the enterprise. At HCM we take the platform concept a step further and see it as an opportunity to create unique solutions for Oracle Identity Management customers. IdentityCert is our commitment to this platform. You can download IdentityCert from the Apple iOS App Store today. It includes a demo dataset that you can use to explore the functions of the product without any server infrastructure. Download it. Give it a try. We would appreciate your interest and welcome any feedback.Resources:Press Release: Hub City Media Introduces iPad Application IdentityCert™ for Oracle Identity AnalyticsApp Store Download: http://bit.ly/IdentityCertOracle Identity Governance Suite

  Read the article

• Creating a Synchronous BPEL composite using File Adapter

  - by [email protected]

  By default, the JDeveloper wizard generates asynchronous WSDLs when you use technology adapters. Typically, a user follows these steps when creating an adapter scenario in 11g: 1) Create a SOA Application with either "Composite with BPEL" or an "Empty Composite". Furthermore, if  the user chooses "Empty Composite", then he or she is required to drop the "BPEL Process" from the "Service Components" pane onto the SOA Composite Editor. Either way, the user comes to the screen below where he/she fills in the process details. Please note that the user is required to choose "Define Service Later" as the template. 2) Creates the inbound service and outbound references and wires them with the BPEL component:     3) And, finally creates the BPEL process with the initiating <receive> activity to retrieve the payload and an <invoke> activity to write the payload.     This is how most BPEL processes that use Adapters are modeled. And, if we scrutinize the generated WSDL, we can clearly see that the generated WSDL is one way and that makes the BPEL process asynchronous (see below)   In other words, the inbound FileAdapter would poll for files in the directory and for every file that it finds there, it would translate the content into XML and publish to BPEL. But, since the BPEL process is asynchronous, the adapter would return immediately after the publish and perform the required post processing e.g. deletion/archival and so on.  The disadvantage with such asynchronous BPEL processes is that it becomes difficult to throttle the inbound adapter. In otherwords, the inbound adapter would keep sending messages to BPEL without waiting for the downstream business processes to complete. This might lead to several issues including higher memory usage, CPU usage and so on. In order to alleviate these problems, we will manually tweak the WSDL and BPEL artifacts into synchronous processes. Once we have synchronous BPEL processes, the inbound adapter would automatically throttle itself since the adapter would be forced to wait for the downstream process to complete with a <reply> before processing the next file or message and so on. Please see the tweaked WSDL below and please note that we have converted the one-way to a two-way WSDL and thereby making the WSDL synchronous: Add a <reply> activity to the inbound adapter partnerlink at the end of your BPEL process e.g.   Finally, your process will look like this:   You are done.   Please remember that such an excercise is NOT required for Mediator since the Mediator routing rules are sequential by default. In other words, the Mediator uses the caller thread (inbound file adapter thread) for processing the routing rules. This is the case even if the WSDL for mediator is one-way.

  Read the article

• SQL SERVER – Puzzle to Win Print Book – Functions FIRST_VALUE and LAST_VALUE with OVER clause and ORDER BY

  - by pinaldave

  Some time an interesting feature and smart audience makes total difference at places. From last two days, I have been writing on SQL Server 2012 feature FIRST_VALUE and LAST_VALUE. Please read following post before I continue today as this question is based on the same. Introduction to FIRST_VALUE and LAST_VALUE Introduction to FIRST_VALUE and LAST_VALUE with OVER clause As a comment of the second post I received excellent question from Nilesh Molankar. He asks what will happen if we change few things in the T-SQL. I really like this question as this kind of questions will make us sharp and help us perform in critical situation in need. We recently publish SQL Server Interview Questions book. I promise that in future version of this book, we will for sure include this question. Instead of repeating his question, I am going to ask something very similar to his question. Let us first run following query (read yesterday’s blog post for more detail): USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Here is the resultset of the above query. Now let us change the ORDER BY clause of OVER clause in above query and see what is the new result. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Now let us see the result and ready for interesting question: Puzzle You can see that row number 2, 3, 4, and 5 has same SalesOrderID = 43667. The FIRST_VALUE is 78 and LAST_VALUE is 77. Now if these function was working on maximum and minimum value they should have given answer as 77 and 80 respectively instead of 78 and 77. Also the value of FIRST_VALUE is greater than LAST_VALUE 77. Why? Explain in detail. Hint Let me give you a simple hint. Just for simplicity I have changed the order of columns selected in the SELECT and ORDER BY (at the end). This will not change resultset but just order of the columns as well order of the rows. However, the data remains the same. USE AdventureWorks GO SELECT s.OrderQty,s.SalesOrderID,s.SalesOrderDetailID, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.OrderQty,s.SalesOrderID,s.SalesOrderDetailID GO Above query returns following result: Now I am very sure all of you have figured out the solution. Here is the second hint – pay attention to row 2, 3, 4, and 10. Hint2 T-SQL Enhancements: FIRST_VALUE() and LAST_VALUE() MSDN: FIRST_VALUE and LAST_VALUE Rules Leave a comment with your detailed answer by Nov 15′s blog post. Open world-wide (where Amazon ships books) If you blog about puzzle’s solution and if you win, you win additional surprise gift as well. Prizes Print copy of my new book SQL Server Interview Questions Amazon|Flipkart If you already have this book, you can opt for any of my other books SQL Wait Stats [Amazon|Flipkart|Kindle] and SQL Programming [Amazon|Flipkart|Kindle]. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• BizTalk 2009 - Pipeline Component Wizard

  - by Stuart Brierley

  Recently I decided to try out the BizTalk Server Pipeline Component Wizard when creating a new pipeline component for BizTalk 2009. There are different versions of the wizard available, so be sure to download the appropriate version for the BizTalk environment that you are working with. Following the download and expansion of the zip file, you should be left with a Visual Studio solution.  Open this solution and build the project. Following this installation is straight foward - locate and run the built setup.exe file in the PipelineComponentWizard Setup project and click through the small number of installation screens. Once you have completed installation you will be ready to use the wizard in Visual Studio to create your BizTalk Pipeline Component. Start by creating a new project, selecting BizTalk Projects then BizTalk Server Pipeline Component.  You will then be presented with the splash screen. The next step is General Setup, where you will detail the classname, namespace, pipeline and component types, and the implementation language for your Pipeline Component. The options for pipeline type are Receive, Send or Any. Depending on the pipeline type chosen there are different options presented for the component type, matching those available within the BizTalk Pipelines themselves: Receive - Decoder, Disassembling Parser, Validate, Party Resolver, Any. Send -  Encoder, Assembling Serializer, Any. Any - Any. The options for implementation language are C# or VB.Net Next you must set up the UI settings - these are the settings that affect the appearance of the pipeline component within Visual Studio. You must detail the component name, version, description and icon.  Next is the definition of the variables that the pipeline component will use.  The values for these variables will be defined in Visual Studio when creating a pipeline. The options for each variable you require are: Designer Property - The name of the variable. Data Type - String, Boolean, Integer, Long, Short, Schema List, Schema With None Clicking finish now will complete the wizard stage of the creation of your pipeline component. Once the wizard has completed you will be left with a BizTalk Server Pipeline Component project containing a skeleton code file for you to complete.   Within this code file you will mainly be interested in the execute method, which is left mostly empty ready for you to implement your custom pipeline code:          #region IComponent members         /// <summary>         /// Implements IComponent.Execute method.         /// </summary>         /// <param name="pc">Pipeline context</param>         /// <param name="inmsg">Input message</param>         /// <returns>Original input message</returns>         /// <remarks>         /// IComponent.Execute method is used to initiate         /// the processing of the message in this pipeline component.         /// </remarks>         public Microsoft.BizTalk.Message.Interop.IBaseMessage Execute(Microsoft.BizTalk.Component.Interop.IPipelineContext pc, Microsoft.BizTalk.Message.Interop.IBaseMessage inmsg)         {             //             // TODO: implement component logic             //             // this way, it's a passthrough pipeline component             return inmsg;         }         #endregion Once you have implemented your custom code, build and compile your Custom Pipeline Component then add the compiled .dll to C:\Program Files\Microsoft BizTalk Server 2009\Pipeline Components . When creating a new pipeline, in Visual Studio reset the toolbox and the custom pipeline component should appear ready for you to use in your Biztalk Pipeline. Drop the pipeline component into the relevant pipeline stage and configure the component properties (the variables defined in the wizard). You can now deploy and use the pipeline as you would any other custom pipeline.

  Read the article

• New Management Console in Java SE Advanced 8u20

  - by Erik Costlow-Oracle

  Java SE 8 update 20 is a new feature release designed to provide desktop administrators with better control of their managed systems. The release notes for 8u20 are available from the public JDK release notes page. This release is not a Critical Patch Update (CPU). I would like to call attention to two noteworthy features of Oracle Java SE Advanced, the commercially supported version of Java SE for enterprises that require both support and specialized tools. The new Advanced Management Console provides a way to monitor and understand client systems at scale. It allows organizations to track usage and more easily create and manage client configuration like Deployment Rule Sets (DRS). DRS can control execution of tracked applications as well as specify compatibility of which application should use which Java SE installation. The new MSI Installer integrates into various desktop management tools, making it easier to customize and roll out different Java SE versions. Advanced Management Console The Advanced Management Console is part of Java SE Advanced designed for desktop administrators, whose users need to run many different Java applications. It provides usage tracking for those Applet & Web Start applications to help identify them for guided DRS creation. DRS can then be verified against the tracked data, to ensure that end-users can run their application against the appropriate Java version with no prompts. Usage tracking also has a different definition for Java SE than it does for most software applications. Unlike most applications where usage can be determined by a simple run-count, Java is a platform used for launching other applications. This means that usage tracking must answer both "how often is this Java SE version used" and "what applications are launched by it." Usage Tracking One piece of Java SE Advanced is a centralized usage tracker. Simply placing a properties file on the client informs systems to report information to this usage tracker, so that the desktop administrator can better understand usage. Information is sent via UDP to prevent any delay on the client. The usage tracking server resides at a central location on the intranet to collect information from those clients. The information is stored in a normalized database for performance, meaning that a single usage tracker can handle a large number of clients. Guided Deployment Rule Sets Deployment Rule Sets were introduced in Java 7 update 40 (September 2013) in order to help administrators control security prompts and guide compatibility. A previous post, Deployment Rule Sets by Example, explains how to configure a rule set so that most applications run against the most secure version but a specific applet may run against the Java version that was current several years ago. There are a different set of questions that can be asked by a desktop administrator in a large or distributed firm: Where are the Java RIAs that our users need? Which RIA needs which Java version? Which users need which Java versions? How do I verify these answers once I have them? The guided deployment rule set creation uses usage tracker data to identify applications both by certificate hash and location. After creating the rules, a comparison tool exists to verify them against the tracked data: If you intend to run an RIA, is it green? If something specific should be blocked, is it red? This makes user-testing easier. MSI Installer The Windows Installer format (MSI) provides a number of benefits for desktop administrators that customize or manage software at scale. Unlike the basic installer that most users obtain from Java.com or OTN, this installer is built around customization and integration with various desktop management products like SCCM. Desktop administrators using the MSI installer can use every feature provided by the format, such as silent installs/upgrades, low-privileged installations, or self-repair capabilities Customers looking for Java SE Advanced can download the MSI installer through their My Oracle Support (MOS) account. Java SE Advanced The new features in Java SE Advanced make it easier for desktop administrators to identify and control client installations at scale. Administrators at organizations that want either the tools or associated commercial support should consider Java SE Advanced.

  Read the article

• JMSContext, @JMSDestinationDefintion, DefaultJMSConnectionFactory with simplified JMS API: TOTD #213

  - by arungupta

  "What's New in JMS 2.0" Part 1 and Part 2 provide comprehensive introduction to new messaging features introduced in JMS 2.0. The biggest improvement in JMS 2.0 is introduction of the "new simplified API". This was explained in the Java EE 7 Launch Technical Keynote. You can watch a complete replay here. Sending and Receiving a JMS message using JMS 1.1 requires lot of boilerplate code, primarily because the API was designed 10+ years ago. Here is a code that shows how to send a message using JMS 1.1 API: @Statelesspublic class ClassicMessageSender { @Resource(lookup = "java:comp/DefaultJMSConnectionFactory") ConnectionFactory connectionFactory; @Resource(mappedName = "java:global/jms/myQueue") Queue demoQueue; public void sendMessage(String payload) { Connection connection = null; try { connection = connectionFactory.createConnection(); connection.start(); Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE); MessageProducer messageProducer = session.createProducer(demoQueue); TextMessage textMessage = session.createTextMessage(payload); messageProducer.send(textMessage); } catch (JMSException ex) { ex.printStackTrace(); } finally { if (connection != null) { try { connection.close(); } catch (JMSException ex) { ex.printStackTrace(); } } } }} There are several issues with this code: A JMS ConnectionFactory needs to be created in a application server-specific way before this application can run. Application-specific destination needs to be created in an application server-specific way before this application can run. Several intermediate objects need to be created to honor the JMS 1.1 API, e.g. ConnectionFactory -> Connection -> Session -> MessageProducer -> TextMessage. Everything is a checked exception and so try/catch block must be specified. Connection need to be explicitly started and closed, and that bloats even the finally block. The new JMS 2.0 simplified API code looks like: @Statelesspublic class SimplifiedMessageSender { @Inject JMSContext context; @Resource(mappedName="java:global/jms/myQueue") Queue myQueue; public void sendMessage(String message) { context.createProducer().send(myQueue, message); }} The code is significantly improved from the previous version in the following ways: The JMSContext interface combines in a single object the functionality of both the Connection and the Session in the earlier JMS APIs.  You can obtain a JMSContext object by simply injecting it with the @Inject annotation.  No need to explicitly specify a ConnectionFactory. A default ConnectionFactory under the JNDI name of java:comp/DefaultJMSConnectionFactory is used if no explicit ConnectionFactory is specified. The destination can be easily created using newly introduced @JMSDestinationDefinition as: @JMSDestinationDefinition(name = "java:global/jms/myQueue",        interfaceName = "javax.jms.Queue") It can be specified on any Java EE component and the destination is created during deployment. JMSContext, Session, Connection, JMSProducer and JMSConsumer objects are now AutoCloseable. This means that these resources are automatically closed when they go out of scope. This also obviates the need to explicitly start the connection JMSException is now a runtime exception. Method chaining on JMSProducers allows to use builder patterns. No need to create separate Message object, you can specify the message body as an argument to the send() method instead. Want to try this code ? Download source code! Download Java EE 7 SDK and install. Start GlassFish: bin/asadmin start-domain Build the WAR (in the unzipped source code directory): mvn package Deploy the WAR: bin/asadmin deploy <source-code>/jms/target/jms-1.0-SNAPSHOT.war And access the application at http://localhost:8080/jms-1.0-SNAPSHOT/index.jsp to send and receive a message using classic and simplified API. A replay of JMS 2.0 session from Java EE 7 Launch Webinar provides complete details on what's new in this specification: Enjoy!

  Read the article

• General Availability of Oracle E-Business Suite Plug-in 12.1.0.1.0

  - by user810030

  We are pleased to announce the General Availability of Oracle E-Business Suite Plug-in 12.1.0.1.0, an integral part of Application Management Suite for Oracle E-Business Suite. The combination of Enterprise Manager 12c Cloud Control and the Application Management Suite combines functionality that was available in the standalone Application Management Pack for Oracle E-Business Suite and Application Change Management Pack for Oracle E-Business Suite with Oracle’s Real User Experience Insight product and the Configuration & Compliance capabilities to provide the most complete solution for managing Oracle E-Business Suite applications. The features that were available in the standalone management packs are now packaged into the Oracle E-Business Suite Plug-in, which is now fully certified with Oracle Enterprise Manager 12c Cloud Control. This latest plug-in extends Cloud Control with E-Business Suite specific system management capabilities and features enhanced change management support. This new release offers the following key enhancements: General: Oracle Enterprise Manager 12c Base Platform uptake: All components of the management suite are certified with Oracle Enterprise Manager 12c Cloud Control. Security: Privilege Delegation: The Oracle E-Business Suite Plug-in now extends Enterprise Manager’s privilege delegation through Sudo and PowerBroker to Oracle E-Business Suite Plug-in host targets.  Privileges and Roles for Managing Oracle E-Business Suite: This release includes new ready-to-use target and resource privileges to monitor, manage, and perform Change Management functionality.  Cloning: Named Credentials Uptake in Cloning: The Clone module transactions now let users leverage the Named Credential feature introduced in Enterprise Manager 12c, thereby passing all the benefits of Named Credentials features in Enterprise Manager to the Oracle E-Business Suite Plug-in users.  Smart Clone improvements: The new and improved Smart Clone UI supports the adding of "pre and post" custom steps to a copy of the ready-to-use cloning deployment procedure. Now a user can pass parameters to the custom steps through the interview screen of the UI as well as pass ready-to-use parameters to the custom steps.  Change Management Enhancements Application Management Suite for Oracle E-Business Suite provides a centralized view to monitor and orchestrate changes (both functional and technical) across multiple Oracle E-Business Suite systems. In this latest release, it provides even more control and flexibility in managing Oracle E-Business Suite changes. Customization Manager: Support for longer file names: Customization Manager now handles file names up to thirty characters in length.  Patch Manager: Queuing of Patch Manager Runs: This feature allows patch runs to queue up if Patch Manager detects a specific target is in a blackout state.  Multi-node system patching: The patch run interview has been enhanced to allow Enterprise Manager Administrator to choose which nodes adpatch will run on.  New AD Administration Options: The patch run interview has been extended to include AD Administration Options "Relink Application Programs", "Generate Product Jars Files", "Generate Report Files", and "Generate Form Files".  Release Technical Details Product documentation for the plug-in is available on My Oracle Support as note 1434392.1.  The Oracle E-Business Suite Plug-in can be accessed in one of the following ways:  Fresh install  Enterprise Manager Store  Oracle Software Delivery Cloud Upgrades  Oracle Technology Network Please refer to the Application Management Pack for Oracle E-Business Suite Guide for further details.  Related Software Component Oracle Real User Experience Insight 12.1.0.0.1  Product documentation is available on Oracle Technology Network in the "Oracle Enterprise Manager 12c Release 1 (12.1) Documentation" set under the "Associated Document" tab. (http://docs.oracle.com/cd/E26370_01/index.htm)  Product may be downloaded individually from Oracle Technology Network software download page for Oracle Enterprise Manager under "Additional Enterprise Manager Downloads." (http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html)  Product may also be downloaded individually from the Oracle Software Delivery Cloud. Select "Oracle Enterprise Manager" product pack, "Oracle Real User Experience Insight 12c Release 1 Media Pack for x8  Collateral Can be accessed on the Application Management Page on Oracle Technology Network

  Read the article

• IE9 Beta

  - by Daniel Moth

  I've been using Internet Explorer 8 since the early pre-release bits, but I never tried IE9 until today – the day the Beta is available. I downloaded it from here: http://www.beautyoftheweb.com/ The download took longer than what I expected, but I was doing other stuff, so no bother. After coming down, it asked me to reboot my computer. Really hate when apps do that, but I did it anyway. The first time I launched it, it prompted me with a list of add-ons I should disable including the start-up time that I could save fore each one. It even let me configure the prompt so, for example, it won't prompt me again unless an add-on contributes to more than 1 second of the startup time. Cool. First thing I noticed is that the search bar had gone and, as you'd expect, you have to search from the address box. I totally despise this feature. The first thing I've been doing with all versions of IE is to turn off the automatic searching from the address bar and now I have no way of searching if I do that. Ridiculous. The second thing I notice is that the tabs are next to the address bar and cannot be moved to go below it. One word for that decision: appalling (and, no, I didn't accidentally drop an 'e' and added an 'l' in the previous word). The third thing I notice to the right is the favorites button (star icon) and when I click on it, it brings up the favorites explorer under it on the right; then I pin the explorer and it jumps to the left(!). Why move the entry point to this feature to the right instead of leaving it on the left is beyond me (other than wanting to retrain me on what I've been used to for all this time), but the fact that pinning it makes it jump sides is… an "astonishing" design decision. As I browse I notice a little annoying pop up in the bottom left every time I hover over a link; there is no status bar. I correctly guessed to right click at the top and turn on the status bar (which also got rid of the popup thereafter) and while I am at it, I bring back my favorites bar which was hidden by default (and am pleased to see that all my favorites are still there). The next thing I notice, I like: IE9 is fast. No joke, I visit sites and they seem to be loading visibly much faster – try it! Beyond the speed, I am interested to find out what else is new. I searched and found a few good links: What's new in Internet Explorer 9 Internet Explorer 9 Features (check out the links under "Clean") Top Features If you are a developer, check out IE's msdn home for many articles, e.g. this section on Canvas and SVG. Either way: wherever you are, get IE9 Beta now and judge for yourself. If you don't like it, you can always uninstall (which auto-restores the previous version). Comments about this post welcome at the original blog.

  Read the article

• IPgallery banks on Solaris SPARC

  - by Frederic Pariente

  IPgallery is a global supplier of converged legacy and Next Generation Networks (NGN) products and solutions, including: core network components and cloud-based Value Added Services (VAS) for voice, video and data sessions. IPgallery enables network operators and service providers to offer advanced converged voice, chat, video/content services and rich unified social communications in a combined legacy (fixed/mobile), Over-the-Top (OTT) and Social Community (SC) environments for home and business customers. Technically speaking, this offer is a scalable and robust telco solution enabling operators to offer new services while controlling operating expenses (OPEX). In its solutions, IPgallery leverages the following Oracle components: Oracle Solaris, Netra T4 and SPARC T4 in order to provide a competitive and scalable solution without the price tag often associated with high-end systems. Oracle Solaris Binary Application Guarantee A unique feature of Oracle Solaris is the guaranteed binary compatibility between releases of the Solaris OS. That means, if a binary application runs on Solaris 2.6 or later, it will run on the latest release of Oracle Solaris.  IPgallery developed their application on Solaris 9 and Solaris 10 then runs it on Solaris 11, without any code modification or rebuild. The Solaris Binary Application Guarantee helps IPgallery protect their long-term investment in the development, training and maintenance of their applications. Oracle Solaris Image Packaging System (IPS) IPS is a new repository-based package management system that comes with Oracle Solaris 11. It provides a framework for complete software life-cycle management such as installation, upgrade and removal of software packages. IPgallery leverages this new packaging system in order to speed up and simplify software installation for the R&D and production environments. Notably, they use IPS to deliver Solaris Studio 12.3 packages as part of the rapid installation process of R&D environments, and during the production software deployment phase, they ensure software package integrity using the built-in verification feature. Solaris IPS thus improves IPgallery's time-to-market with a faster, more reliable software installation and deployment in production environments. Extreme Network Performance IPgallery saw a huge improvement in application performance both in CPU and I/O, when running on SPARC T4 architecture in compared to UltraSPARC T2 servers.  The same application (with the same activation environment) running on T2 consumes 40%-50% CPU, while it consumes only 10% of the CPU on T4. The testing environment comprised of: Softswitch (Call management), TappS (Telecom Application Server) and Billing Server running on same machine and initiating various services in capacity of 1000 CAPS (Call Attempts Per Second). In addition, tests showed a huge improvement in the performance of the TCP/IP stack, which reduces network layer processing and in the end Call Attempts latency. Finally, there is a huge improvement within the file system and disk I/O operations; they ran all tests with maximum logging capability and it didn't influence any benchmark values. "Due to the huge improvements in performance and capacity using the T4-1 architecture, IPgallery has engineered the solution with less hardware.  This means instead of deploying the solution on six T2-based machines, we will deploy on 2 redundant machines while utilizing Oracle Solaris Zones and Oracle VM for higher availability and virtualization" Shimon Lichter, VP R&D, IPgallery In conclusion, using the unique combination of Oracle Solaris and SPARC technologies, IPgallery is able to offer solutions with much lower TCO, while providing a higher level of service capacity, scalability and resiliency. This low-OPEX solution enables the operator, the end-customer, to deliver a high quality service while maintaining high profitability.

  Read the article

• Release 17 is here!

  - by Cheryl

  Our training development team has been busy updating courses to keep pace with the new release of CRM On Demand. Release 17 is here! And I heard recently that it's one of our biggest releases ever. A lot of new features and functionality for you to take advantage of - too much for me to cover in this blog post. But, I thought I'd tell you about a few of my favorites - be sure to take a look at the What's New in Release 17 recording to see the full list, though...because I'm only going to touch on a few. Create your own look - okay, I'm starting with the fun stuff. But, there is a new customizable themes feature so that you can change the look of the application; colors, logo, the shape of the tabs. And it's really easy. There's also a whole new library of ready-made themes for you to pick from if you just want to go with one of those. Use this new feature to match the look of your company logo and color scheme. Or blaze new trails. You can create the look for the whole company, or a different look for each CRM On Demand role. This might especially come in handy if you're using the Partner Relationship Management (PRM) capabilities of CRM On Demand - you can create themes for your partner-facing roles to provide branded partner portals. Speaking of PRM - there are enhancements in this release to help companies better manage their partner relationships. A new Deal Registration object, which is separate from the Opportunity record, and better Special Pricing Request and Marketing Development Fund Request processes, give a lot more flexibility in how companies can build and manage their relationships with partners. Some new options for Forecasts in in Release 17, too. You can now have more than one type of forecast generated each forecast period. For example, you might need to see a forecast of the total opportunity revenue for your sales team, as well as on that breaks down revenue by product. The forecast definition now lets you do that. Other options allow you to make submitting forecasts easier, split opportunity revenue across the team and forecast that split appropriately. And - look for the new Forecast subject area in Answers, for building custom forecast reports. Ever wish you could use Workflow Rules to automatically reassign leads if they haven't been followed up on...or to email a manager if the status of a service request isn't changed after a specified period of time? Then check out the new Wait action for workflows. I think you'll be happy. Ok, enough for today. There is a lot to Release 17 that I didn't mention - a lot has been added for our Life Science industry edition, some new data visibility options, a new Data Loader tool, and more. Stay tuned for more blog posts about these and other Release 17 features in the coming weeks. In the meantime, don't forget about all of the resources we have for you to learn more (see my Learning About Release 17 blog post for details).

  Read the article

• Pull Request Changes, Multi-Selection in Advanced View, and Advertisement Changes

  [Do you tweet? Follow us on Twitter @matthawley and @adacole_msft] We deployed a new version of the CodePlex website today. Pull Request Changes In this release, we have begun to re-focus on Pull Requests to ensure a productive experience between the project users and developers. We feel we made significant progress in this area for this release and look forward to using your feedback to drive future iterations. One of the biggest hurdles people have indicated is the inability to see what a pull request includes without pulling the source down from a Mercurial client. With today’s changes, any user has the ability to view a pull request, the changesets / changes included, and perform an inline diff of the file. When a pull request is made, the CodePlex website will query for all outgoing changes from the fork to the main repository for a point-in-time comparison. Because of this point-in-time comparison… All existing pull requests created prior to this release will not have changesets associated with them. If new commits are pushed to the fork while a pull request is active, they will not appear associated with the pull request. The pull request will need to be re-submitted for them to appear. Once a pull request is created, you can “View the Pull Request” which takes you to a page that looks like As you may notice, we now display a lot more detailed information regarding that pull request including who it was requested by and when, the associated changesets, the description, who it’s assigned to (we’ll come back to this) and the listing of summarized file changes. What you’ll also notice, is that each modified file has the ability to view a diff of all changes made. When you click “(view diff)” for a file, an inline diff experience appears. This new experience allows you to quickly navigate through all of the modified files as well as viewing the various change blocks for each file. You’ll also notice as you browse through each file’s changes, we update the URL to include the file path so you can quickly send a direct link to a pull request’s file. Clicking “(close diff)” will bring you back to the original pull request view. View this pull request live on WikiPlex. Pull Request Review Assignment Another new feature we added for pull requests is the ability for project members to assign pull requests for review. Any project member has the ability to assign (and re-assign if needed) a pull request to a project member. Once the assignment has been made, that project member will be notified via email of the assignment. Once they complete the review of the pull request, they can either accept or deny it similarly to the previous process. Multi-Selection in Advanced View Filters One of the more recent requests we have heard from users is the ability multi-select advanced view filters for work items. We are happy to announce this is now possible. Simply control-click the multiple options for each filter item and your work item query will be refined as such. Should you happen to unselect all options for a given filter, it will automatically reset to the default option for that filter. Furthermore, the “Direct Link” URL will be updated to include the multi-selected options for each filter. Note: The “Direct Link” feature was released in our previous deployment, just never written about. It allows you to capture the current state of your query and send it to other individuals. Advertisement Changes Very recently, the advertiser (The Lounge) we partnered to provide advertising revenue for projects, or donated to charity, was acquired by Lake Quincy Media. There has been no change in the advertising platform offering, and all projects have been converted over to using the new infrastructure. Project owners should note the new contact information for getting paid. The CodePlex team values your feedback, and is frequently monitoring Twitter, our Discussions and Issue Tracker for new features or problems. If you’ve not visited the Issue Tracker recently, please take a few moments to log an idea or vote for the features you would most like to see implemented on CodePlex.

  Read the article

• My Tech Ed North America Preview - Certification Edition

  - by Chris Gardner

  In my previous TechEd North America Preview, I addressed all the content I wanted to see at the show. This time, we shall turn our attention to the certifications I might try to pick up. If you have never been to TechEd North America before, one of the greatest things about the event is an on-site certification center. If you have a couple hours to spare, you can walk up to a test. The first test on my agenda is 70-5231. I took this update test once, but did not do well on the MVC portion2. A few practice tests later, and I think I'm ready to fake that section. After that, I need to complete my road to being a master. The good folks here at work have been having a real love / hate relationship with the idea of me become an MCM in SQL Server3. Of course, before I do that, I need to finally take the SQL Administration tests. Thus, we shall add 70-4324 and 70-4505 to the list. Speaking of MCM, TechEd North America will have a special on test 88-9706. This test is normally $500, and you have to find a place to take it7. However, there is a special 50% off rate for people who take it on location. With those kind of prices, I may just take it as a form of study guide. As a final push, I may take some Windows Phone exams. I mentioned in my previous post that I may attend the 70-5998 Exam Cram session. Unfortunately, I will be staffing the Hands-On-Lab at that time. As we know, this has never stopped me from taking a test. This may lead to fits of 70-5069, but after we've come this far... That should complete my list. Do I really think I'll find time to take 6 tests at TechEd North America? Probably not. I have done it at TechEd North America before, but that was before I was TechEd North America staff. I also had a co-worker pass 9 in one year, but he basically did nothing but travel to Orlando in 2007 to take tests. And what's the point of attending a HUGE conference if you don't network? Of course, networking will have to wait for Friday's post... 1 Upgrade: Transition Your MCPD .NET Framework 3.5 Web Developer Skills to MCPD .NET Framework 4 Web Developer 2Because I never have used, nor do I really think I ever will use, MVC... 3By that, I mean they love the idea, and they hate the price 4Microsoft SQL Server 2008, Implementation and Maintenance 5PRO: Designing, Optimizing and Maintaining a Database Administrative Solution Using Microsoft SQL Server 2008 6SQL Server 2008 Microsoft Certified Master: Knowledge Exam 7Which isn't nearly as expensive as the Lab Exam, nor as difficult to find a location. However, it is not offered at every testing facility. 8PRO: Designing and Developing Windows Phone Applications 9TS: Silverlight 4, Development

  Read the article

• The SmartAssembly Rearchitecture

  - by Simon Cooper

  You may have noticed that not a lot has happened to SmartAssembly in the past few months. However, the team has been very busy behind the scenes working on an entirely new version of SmartAssembly. SmartAssembly 6.5 Over the past few releases of SmartAssembly, the team had come to the realisation that the current 'architecture' - grown organically, way before RedGate bought it, from a simple name obfuscator over the years into a full-featured obfuscator and assembly instrumentation tool - was simply not up to the task. Not for what we wanted to do with it at the time, and not what we have planned for the future. Not only was it not up to what we wanted it to do, but it was severely limiting our development capabilities; long-standing bugs in the root architecture that couldn't be fixed, some rather...interesting...design decisions, and convoluted logic that increased the complexity of any bugfix or new feature tenfold. So, we set out to fix this. Earlier this year, a new engine was written on which SmartAssembly would be based. Over the following few months, each feature was ported over to the new engine and extensively tested by our existing unit and integration tests. The engine was linked into the existing UI (no easy task, due to the tight coupling between the UI and old engine), and existing RedGate products were tested on the new SmartAssembly to ensure the new engine acted in the same way. The result is SmartAssembly 6.5. The risks of a rearchitecture Are there risks to rearchitecting a product like SmartAssembly? Of course. There was a lot of undocumented behaviour in the old engine, and as part of the rearchitecture we had to find this behaviour, define it, and document it. In the process we found some behaviour of the old engine that simply did not make sense; hence the changes in pruning & obfuscation behaviour in the release notes. All the special edge cases we had to find, document, and re-implement. There was a chance that these special cases would not be found until near the end of the project, when everything is functionally complete and interacting together. By that stage, it would be hard to go back and change anything without a whole lot of extra work, delaying the release by months. We always knew this was a possibility; our initial estimate of the time required was '4 months, ± 4 months'. And that was including various mitigation strategies to reduce the likelihood of these issues being found right at the end. Fortunately, this worst-case did not happen. However, the rearchitecture did produce some benefits. As well as numerous bug fixes that we could not fix any other way, we've also added logging that lets you find out exactly why a particular field or property wasn't pruned or obfuscated. There's a new command line interface, we've tested it with WP7.1 and Silverlight 5, and we've added a new option to error reporting to improve the performance of instrumented apps by ~10%, at the cost of inaccurate line numbers in reports. So? What differences will I see? Largely none. SmartAssembly 6.5 produces the same output as SmartAssembly 6.2. The performance of 6.5 will be much faster for some users, and generally the same as 6.2 for the remaining. If you've encountered a bug with previous versions of SmartAssembly, I encourage you to try 6.5, as it has most likely been fixed in the rearchitecture. If you encounter a bug with 6.5, please do tell us; we'll be doing another release quite soon, so we'll aim to fix any issues caused by 6.5 in that release. Most importantly, the new architecture finally allows us to implement some Big Things with SmartAssembly we've been planning for many months; these will fundamentally change how you build, release and monitor your application. Stay tuned for further updates!

  Read the article

• Visual Studio Extensions

  - by Scott Dorman

  Originally posted on: http://geekswithblogs.net/sdorman/archive/2013/10/18/visual-studio-extensions.aspxAs a product, Visual Studio has been around for a long time. In fact, it’s been 18 years since the first Visual Studio product was launched. In that time, there have been some major changes but perhaps the most important (or at least influential) changes for the course of the product have been in the last few years. While we can argue over what was and wasn’t an important change or what has and hasn’t changed, I want to talk about what I think is the single most important change Microsoft has made to Visual Studio. Specifically, I’m referring to the Visual Studio Gallery (first introduced in Visual Studio 2010) and the ability for third-parties to easily write extensions which can add new functionality to Visual Studio or even change existing functionality. I know Visual Studio had this ability before the Gallery existed, but it was expensive (both from a financial and development resource) perspective for a company or individual to write such an extension. The Visual Studio Gallery changed all of that. As of today, there are over 4000 items in the Gallery. Microsoft itself has over 100 items in the Gallery and more are added all of the time. Why is this such an important feature? Simply put, it allows third-parties (companies such as JetBrains, Telerik, Red Gate, Devart, and DevExpress, just to name a few) to provide enhanced developer productivity experiences directly within the product by providing new functionality or changing existing functionality. However, there is an even more important function that it serves. It also allows Microsoft to do the same. By providing extensions which add new functionality or change existing functionality, Microsoft is not only able to rapidly innovate on new features and changes but to also get those changes into the hands of developers world-wide for feedback. The end result is that these extensions become very robust and often end up becoming part of a later product release. An excellent example of this is the new CodeLens feature of Visual Studio 2013. This is, perhaps, the single most important developer productivity enhancement released in the last decade and already has huge potential. As you can see, out of the box CodeLens supports showing you information about references, unit tests and TFS history.   Fortunately, CodeLens is also accessible to Visual Studio extensions, and Microsoft DevLabs has already written such an extension to show code “health.” This extension shows different code metrics to help make sure your code is maintainable. At this point, you may have already asked yourself, “With over 4000 extensions, how do I find ones that are good?” That’s a really good question. Fortunately, the Visual Studio Gallery has a ratings system in place, which definitely helps but that’s still a lot of extensions to look through. To that end, here is my personal list of favorite extensions. This is something I started back when Visual Studio 2010 was first released, but so much has changed since then that I thought it would be good to provide an updated list for Visual Studio 2013. These are extensions that I have installed and use on a regular basis as a developer that I find indispensible. This list is in no particular order. NuGet Package Manager for Visual Studio 2013 Microsoft CodeLens Code Health Indicator Visual Studio Spell Checker Indent Guides Web Essentials 2013 VSCommands for Visual Studio 2013 Productivity Power Tools (right now this is only for Visual Studio 2012, but it should be updated to support Visual Studio 2013.) Everyone has their own set of favorites, so mine is probably not going to match yours. If there is an extension that you really like, feel free to leave me a comment!

  Read the article

• Oracle Database Upcoming Event dates to know

  - by mandy.ho

  February may be a short month, but it's not short of exciting Oracle events. From information packed "Real Performance Days" to participation in one of the biggest IT Security events - look out for Oracle Database and let us know if you are there with us! Feb 13-18, 2011 - Las Vegas, NV TDWI World Conference Series Join Oracle in highlighting Exadata x2-2 and x2-8, along with Oracle Business Intelligence, Enterprise Performance management and Data Warehousing solutions. Oracle will be presenting a workshop - Oracle Data Integration: Best-of-Breed Solutions for the Enterprise Wednesday, February 16, 2011 7p.m - 9p.m Glen Goodrich, Director of Product Management Christophe Dupupet, Director of Product Management, Data Integration http://events.tdwi.org/events/las-vegas-world-conference-2011/sessions/session-list.aspx Feb 14-17, 2011 - Barcelona, Spain Mobile World Congress MWC is an event where Oracle showcases the near complete breadth and depth of value that our Communications Industry strategy and Hardware and Software Solutions can deliver. Oracle supports Communications Service Providers today and delivers platforms and flexibility primed for the future. Oracle will have a two story Pavilion, along with an Oracle Java and Embedded Solutions Center - App Planet. The Exhibition times are Monday, 14th February 09.00 - 19.00 Tuesday, 15th February 09.00 - 19.00 Wednesday, 16th February 09.00 - 19.00 Thursday, 17th February 09.00 - 16.00 Have questions? Meet with Oracle Sales representatives at the Oracle Café. Open every day from 9am to 17:00pm. http://eventreg.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=109912&src=6973382&src=6973382&Act=4 Feb 14-18, 2011 - San Francisco, CA RSA Conference As the world's most complete, open, integrated business software and hardware systems provider, Oracle can uniquely safeguard your information throughout its entire lifecycle. Learn more by attending these sessions: Cloud Computing: A Brave New World for Security and Privacy (CLD-201) Wednesday, February 16 at 8:30 a.m. Databases Under Attack - Securing Heterogeneous Database Infrastructures (DAS-301) Thursday, February 17, 2011 at 8:30 a.m. Seven Steps to Protecting Databases (DAS-402) Friday, February 18 at 10:10 a.m. RSA Conference Attendees will also have the opportunity to meet with Oracle Security Solution experts, see live product demos and more by visiting booth # 1559. Hours: Monday, February 14, 6:00 p.m. - 8:00 p.m., Tuesday, February 15, 11:00 a.m. - 6:00 p.m. and 4:30 p.m. - 6:00p.m., Wednesday, February 16, 11:00 a.m. - 6:00 p.m., and Thursday, February 17, 11:00 a.m. - 3:00 p.m. http://eventreg.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=127657&src=6967733&src=6967733&Act=12 Feb 21-25, 2011 - Various Locations IOUG Presents - A Day of Real World Performance with Tom Kyte, Andrew Holdsworth and Graham Wood These Oracle experts will debate, discuss and delineate the best practices for designing hardware architectures, deploying Oracle databases, and developing applications that deliver the fastest possible performance for your business.Topics are covered in a conversational format - with all three chiming in where appropriate. Each presenter has their own screen projector to demonstrate their individual points to the participants. Customers will have the opportunity to get their specific performance/tuning questions answered and learn how to balance all the different environmental requirements for their applications to improve performance. Register today for the following dates and locations • February 21 in San Diego, CA • February 22 in Los Angeles, CA • February 23 in Seattle, WA • February 25 in Phoenix, AZ http://www.ioug.org/tabid/194/Default.aspx Feb 8-24 - Various Oracle Enterprise Cloud Summit This series of full-day events with cloud experts, sharing real-world best practices, reference architectures and more continues during the month of February. Attend the Oracle Enterprise Cloud Summit to learn how to: • Build a state-of-the-art cloud architecture • Leverage your existing IT investments • Optimize your IT management processes Whether you are considering a move to cloud computing or have already adopted a cloud model, this event offers you the insights you need to take full advantage of cloud computing. Check below to see if the event is coming to a city near you. http://www.oracle.com/us/corporate/events/cloud-events-214342.html

  Read the article

• How-to enable user session time out warning (JDev 11.1.1.4)

  - by frank.nimphius

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle JDeveloper 11.1.1.4 contains a new session time-out warning functionality. Quoting the Oracle® Fusion Middleware Web User Interface Developer's Guide for Oracle Application Development Framework11g Release 1 (11.1.1.4.0) documentatiom http://download.oracle.com/docs/cd/E17904_01/web.1111/b31973/ap_config.htm#BABFIGBA "When a request is sent to the server, a session timeout value is written to the page and the session timeout warning interval is defined by the context parameter  oracle.adf.view.rich.sessionHandling.WARNING_BEFORE_TIMEOUT. The user is given the opportunity to extend the session in a warning dialog, and a notification is sent when the session has expired and the page is refreshed. Depending on the application security configuration, the user may be redirected to the log in page when the session expires. Use the oracle.adf.view.rich.sessionHandling.WARNING_BEFORE_TIMEOUT context parameter to set the number of seconds prior to the session time out when a warning dialog is displayed. If the value of WARNING_BEFORE_TIMEOUT is less than 120 seconds, if client state saving is used for the page, or if the session has been invalidated, the feature is disabled. The session time-out value it taken directly from the session. Example A-3 shows configuration of the warning dialog to display at 120 seconds before the time-out of the session. Example A-3 Configuration of Session Time-out Warning <context-param>    <param-name>        oracle.adf.view.rich.sessionHandling.WARNING_BEFORE_TIMEOUT   </param-name>    <param-value>120</param-value> </context-param> The default value of this parameter is 120 seconds. To prevent notification of the user too frequently when the session time-out is set too short, the actual value of WARNING_BEFORE_TIMEOUT is determined dynamically, where the session time-out must be more than 2 minutes or the feature is disabled.

  Read the article

• Implementing Search for BlogReader Windows 8 Sample

  - by Harish Ranganathan

  The BlogReader sample is an excellent place to start speeding up your Windows 8 development skills.  The tutorial is available here and the complete source code is available here Create a project called WindowsBlogReader and create pages for ItemsPage.xaml, SplitPage.xaml and DetailPage.xaml and copy the corresponding code blocks from the sample listed above. Created a class file FeedData.cs and copy the code.  Finally, create a class DateConverter.cs and copy the code associated with it. With that you should be able to build and run the project.  There seems to be one issue in the sample feeds listed that the first week (feed1) doesn’t seem to expose it.  So you can skip that and use the second feed as first feed.  You will end up with one feed less but it works. I had demonstrated this in the recent TechDays at Chennai.  How we can use the Search Contract and implement Search for within the Blog Titles. First off, we need to declare that the App will be using Search Contract, in the Package.appmanifest file Next, we would need a handle of the Search Contract when user types on the search window in Charms Menu. If you had completed the code sample from the link above, you would have ItemsPage.xaml and ItemsPage.xaml.cs.  Open the ItemsPage.xaml.cs. Import the namespaces using System.Collections.ObjectModel and System.Linq. in the ItemsPage() constructor, right after this.InitializeComponent(); add the following code Windows.ApplicationModel.Search.SearchPane.GetForCurrentView().QuerySubmitted += ItemsPage_QuerySubmitted; This event is fired when users open up the Search Panel from Charms Menu, type something and hit enter. We need to handle this event declared in the delegate.  For that we need to pull the FeedDataSource instantiation to the root of the class to make it global. So, add the following as the first line within the partial class FeedDataSource feedDataSource; Also, modify the LoadState method, as follows:- protected override void LoadState(Object navigationParameter, Dictionary<String, Object> pageState)        {            feedDataSource = (FeedDataSource)App.Current.Resources["feedDataSource"];            if (feedDataSource != null)            {                this.DefaultViewModel["Items"] = feedDataSource.Feeds;            }        } Next is to implement the ItemsPage_QuerySubmitted method void ItemsPage_QuerySubmitted(Windows.ApplicationModel.Search.SearchPane sender, Windows.ApplicationModel.Search.SearchPaneQuerySubmittedEventArgs args)         {             this.DefaultViewModel["Items"] = from dynamic item in feedDataSource.Feeds                                              where                                              item.Title.Contains(args.QueryText)                                              select item;         } As you can see we are almost using the same defaultviewmodel with the change that we are using a linq query to do a search on feeds which has the Title that matches QueryText. With this we are ready to run the app. Run the App.  Hit the Charms Menu with Windows + C key combination and type a text to search within the blog. You can see that it filters the Blogs which has the matching text. We can modify the above Linq query to do a search for the Text in other attributes like description, actual blog content etc., I have uploaded the complete code since the original WindowsBlogReader Code is not available for download.  You can download it from here note:  this code is provided as-is without any warranties.  Cheers!!!

  Read the article

• My First Iteration Zero

  - by onefloridacoder

  I recently watched a web cast that covered the idea of planning from the concept stage to the product backlog.  It was the first content I had seen related to Iteration Zero and it made a lot of sense from a planning and engagement perspective where the customer is concerned.  It illuminated some of the problems I’ve experienced with getting a large project of the ground.  The idea behind this is to just figure out get everyone to understand what needs to be constructed and to build the initial feature set from a *very* high level.  Once that happens other parts of the high level construction start to take place.  You end up with a feature list that describes what the business wants the system to do, and what it potentially may (or may not) interact with.  Low tech tools are used to create UI mockups that can be used as a starting point for some of the key UI pieces. Toward the end of the webcast they speaker introduced something that was new to me.  He referred to it as an executable skeleton or the steel thread.  The idea with this part of the webcast was to describe walking through the different mocked layers of the application.  Not all layers and collaborators are involved at this stage since it’s Iteration Zero, and each layer is either hard-coded or completely mocked to provide a 35K foot view of how the different layers layers work together.  So imagine two actors on each side of a layer diagram and the flow goes down from the upper left side down through a a consumer, thorough a service layer and then back up the service layer to the destination/actor. I would imagine much could be discussed moving through new/planned or existing/legacy layers, or a little of both to see what’s implied by the current high-level design. One part of the web cast has the business and design team creating the product box (think of your favorite cereal or toy box) with all of the features and even pictures laid out on the outside of the box.  The notion here is that if you handed this box to someone and told them your system was inside they would have an understanding of what the system would be able to do, or the features it could provide.    One of the interesting parts of the webcast was where the speaker described that he worked with a couple of groups in the same room and each group came up with a different product box – the point is that each group had a different idea of what the system was supposed to do.  At this point of the project I thought that to be valuable considering my experience has been that historically this has taken longer than a week to realize that the business unit and design teams see the high level solution differently.  Once my box is finished I plan on moving to the next stage of solution definition which is to plan the UI for this small application using Excel, to map out the UI elements.  I’m my own customer so it feels like cheating, but taking these slow deliberate steps have already provided a few learning opportunities.    So I resist the urge to load all of my user stories into my newly installed VS2010  TFS project and try to reduce or add to, the number of user stories and/or refine the high level estimates I’ve come up with so far.

  Read the article

• CacheAdapter 2.4 – Bug fixes and minor functional update

  - by Glav

  Note: If you are unfamiliar with the CacheAdapter library and what it does, you can read all about its awesome ability to utilise memory, Asp.Net Web, Windows Azure AppFabric and memcached caching implementations via a single unified, simple to use API from here and here.. The CacheAdapter library is receiving an update to version 2.4 and is currently available on Nuget here. Update: The CacheAdapter has actualy just had a minor revision to 2.4.1. This significantly increases the performance and reliability in memcached scenario under more extreme loads. General to moderate usage wont see any noticeable difference though. Bugs This latest version fixes a big that is only present in the memcached implementation and is only seen in rare, intermittent times (making i particularly hard to find). The bug is where a cache node would be removed from the farm when errors in deserialization of cached objects would occur due to serialised data not being read from the stream in entirety. The code also contains enhancements to better surface serialization exceptions to aid in the debugging process. This is also specifically targeted at the memcached implementation. This is important when moving from something like memory or Asp.Web caching mechanisms to memcached where the serialization rules are not as lenient. There are a few other minor bug fixes, code cleanup and a little refactoring. Minor feature addition In addition to this bug fix, many people have asked for a single setting to either enable or disable the cache.In this version, you can disable the cache by setting the IsCacheEnabled flag to false in the application configuration file. Something like the example below: <Glav.CacheAdapter.MainConfig> <setting name="CacheToUse" serializeAs="String"> <value>memcached</value> </setting> <setting name="DistributedCacheServers" serializeAs="String"> <value>localhost:11211</value> </setting> <setting name="IsCacheEnabled" serializeAs="String"> <value>False</value> </setting> </Glav.CacheAdapter.MainConfig> Your reasons to use this feature may vary (perhaps some performance testing or problem diagnosis). At any rate, disabling the cache will cause every attempt to retrieve data from the cache, resulting in a cache miss and returning null. If you are using the ICacheProvider with the delegate/Func<T> syntax to populate the cache, this delegate method will get executed every single time. For example, when the cache is disabled, the following delegate/Func<T> code will be executed every time: var data1 = cacheProvider.Get<SomeData>("cache-key", DateTime.Now.AddHours(1), () => { // With the cache disabled, this data access code is executed every attempt to // get this data via the CacheProvider. var someData = new SomeData() { SomeText = "cache example1", SomeNumber = 1 }; return someData; }); One final note: If you access the cache directly via the ICache instance, instead of the higher level ICacheProvider API, you bypass this setting and still access the underlying cache implementation. Only the ICacheProvider instance observes the IsCacheEnabled setting. Thanks to those individuals who have used this library and provided feedback. Ifyou have any suggestions or ideas, please submit them to the issue register on bitbucket (which is where you can grab all the source code from too)

  Read the article

• Top 5 Mobile Apps To Keep Track Of Cricket Scores [ICC World Cup]

  - by Gopinath

  The ICC World Cup 2011 has started with a bang today and the first match between India vs Bangladesh was a cracker. India trashed Bangladesh with a huge margin, thanks to Sehwag for scoring an entertaining 175 runs in 140 runs. At the moment it’s very clear that whole India is gripped with cricket fever and so the rest of fans across the globe. Couple of days ago we blogged about how to watch live streaming of ICC cricket world cup online for free as well as top 10 websites to keep track live scores on your computers. What about tracking live cricket scores on mobiles phones? Here is our guide to top mobile apps available for Symbian(Nokia), Android, iOS and Windows mobiles. By the way, we are covering free apps alone in this post. Why to waste money when free apps are available? SnapTu – Symbian Mobile App SnapTu is a multi feature application that lets you to track live cricket scores, read latest news and check stats published on cric info. SnapTu has tie up with Cric Info and accessing all of CricInfo website on your mobile is very easy. Along with live scores, SnapTu also lets you access your Facebook, Twitter and Picassa on your mobile. This is my favourite application to track cricket on Symbian mobiles. Download SnapTu for your mobiles here Yahoo! Cricket – Symbian & iOS App Yahoo! Cricket Scores is another dedicated application to catch up with live scores and news on your Nokia mobiles and iPhones. This application is developed by Yahoo!, the web giant as well as the official partner of ICC. Features of the app at a glance Cricket: Get a summary page with latest scores, upcoming matches and details of the recent matches News: View sections devoted to the latest news, interviews and photos Statistics: Find the latest team and player stats Download Yahoo! Cricket For Symbian Phones   Download Yahoo! Cricket For iOS ESPN CricInfo – Android and iOS App Is there any site that is better than CricInfo to catch up with latest cricket news and live scores? I say No. ESPN CricInfo is the best website available on the web to get up to the minute  cricket information with in-depth analysis from cricket experts. The live commentary provided by CricInfo site is equally enjoyable as watching live cricket on TV. CricInfo guys have their official applications for Android mobiles and iOS devices and you accessing ball by ball updates on these application is joy. Download ESPN Crick Info App: Android Version, iPhone Version NDTV Cricket – Android, iOS and Blackberry App NDTV Cricket App is developed by NDTV, the most popular English TV news channel in India. This application provides live coverage of international and domestic cricket (Test, ODI & T20) along with latest News, Photos, Videos and Stats. This application is available for iOS devices(iPhones, iPads, iPod Touch), Android mobiles and Blackberry devices. Download NDTV Cricket for iOS here & here    Download NDTV Apps For Rest of OSs ECB Cricket – Symbian, iOS & Android App If you are an UK citizen then  this may be the right application to download for getting live cricket score updates as well as latest news about England Cricket Board. ECB Cricket is an official application of England Cricket Board Download ECB Cricket : Android Version, iPhone Version, Symbian Version Are there any better apps that we missed to feature in this list? This article titled,Top 5 Mobile Apps To Keep Track Of Cricket Scores [ICC World Cup], was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• SQL Constraints &ndash; CHECK and NOCHECK

  - by David Turner

  One performance issue i faced at a recent project was with the way that our constraints were being managed, we were using Subsonic as our ORM, and it has a useful tool for generating your ORM code called SubStage – once configured, you can regenerate your DAL code easily based on your database schema, and it can even be integrated into your build as a pre-build event if you want to do this.  SubStage also offers the useful feature of being able to generate DDL scripts for your entire database, and can script your data for you too. The problem came when we decided to use the generate scripts feature to migrate the database onto a test database instance – it turns out that the DDL scripts that it generates include the WITH NOCHECK option, so when we executed them on the test instance, and performed some testing, we found that performance wasn’t as expected. A constraint can be disabled, enabled but not trusted, or enabled and trusted.  When it is disabled, data can be inserted that violates the constraint because it is not being enforced, this is useful for bulk load scenarios where performance is important.  So what does it mean to say that a constraint is trusted or not trusted?  Well this refers to the SQL Server Query Optimizer, and whether it trusts that the constraint is valid.  If it trusts the constraint then it doesn’t check it is valid when executing a query, so the query can be executed much faster. Here is an example base in this article on TechNet, here we create two tables with a Foreign Key constraint between them, and add a single row to each.  We then query the tables: 1 DROP TABLE t2 2 DROP TABLE t1 3 GO 4 5 CREATE TABLE t1(col1 int NOT NULL PRIMARY KEY) 6 CREATE TABLE t2(col1 int NOT NULL) 7 8 ALTER TABLE t2 WITH CHECK ADD CONSTRAINT fk_t2_t1 FOREIGN KEY(col1) 9 REFERENCES t1(col1) 10 11 INSERT INTO t1 VALUES(1) 12 INSERT INTO t2 VALUES(1) 13 GO14 15 SELECT COUNT(*) FROM t2 16 WHERE EXISTS17 (SELECT *18 FROM t1 19 WHERE t1.col1 = t2.col1) This all works fine, and in this scenario the constraint is enabled and trusted.  We can verify this by executing the following SQL to query the ‘is_disabled’ and ‘is_not_trusted’ properties: 1 select name, is_disabled, is_not_trusted from sys.foreign_keys This gives the following result: We can disable the constraint using this SQL: 1 alter table t2 NOCHECK CONSTRAINT fk_t2_t1 And when we query the constraints again, we see that the constraint is disabled and not trusted: So the constraint won’t be enforced and we can insert data into the table t2 that doesn’t match the data in t1, but we don’t want to do this, so we can enable the constraint again using this SQL: 1 alter table t2 CHECK CONSTRAINT fk_t2_t1 But when we query the constraints again, we see that the constraint is enabled, but it is still not trusted: This means that the optimizer will check the constraint each time a query is executed over it, which will impact the performance of the query, and this is definitely not what we want, so we need to make the constraint trusted by the optimizer again.  First we should check that our constraints haven’t been violated, which we can do by running DBCC: 1 DBCC CHECKCONSTRAINTS (t2) Hopefully you see the following message indicating that DBCC completed without finding any violations of your constraint: Having verified that the constraint was not violated while it was disabled, we can simply execute the following SQL:   1 alter table t2 WITH CHECK CHECK CONSTRAINT fk_t2_t1 At first glance this looks like it must be a typo to have the keyword CHECK repeated twice in succession, but it is the correct syntax and when we query the constraints properties, we find that it is now trusted again: To fix our specific problem, we created a script that checked all constraints on our tables, using the following syntax: 1 ALTER TABLE t2 WITH CHECK CHECK CONSTRAINT ALL

  Read the article

• What DX level does my graphics card support? Does it go to 11?

  - by Daniel Moth

  Recently I run into a situation that I have run into quite a few times. Someone encounters a machine and the question arises: "Is there a DirectX 11 card in this machine?". Typically the reason you are interested in that is because cards with DirectX 11 drivers fully support DirectCompute (and by extension C++ AMP) for GPGPU programming. The driver specifically is WDDM (1.1 on Windows 7 and Windows 8 introduces WDDM 1.2 with cool new capabilities). There are many ways for figuring out if you have a DirectX11 card, so here are the approaches that you can use, with a bonus right at the end of the post. Run DxDiag WindowsKey + R, type DxDiag and hit Enter. That is the DirectX diagnostic tool, which unfortunately, only tells you on the "System" tab what is the highest version of DirectX installed on your machine. So if it reports DirectX 11, that doesn't mean you have a DX11 driver! The "Display" tab has a promising "DDI version" label, but unfortunately that doesn't seem to be accurate on the machines I've tested it with (or I may be misinterpreting its use). Either way, this tool is not the one you want for this purpose, although it is good for telling you the WDDM version among other things. Use the Microsoft hardware page There is a Microsoft Windows 7 compatibility center, that lists all hardware (tip: use the advanced search) and you could try and locate your device there… good luck. Use Wikipedia or the hardware vendor's website Use the Wikipedia page for the vendor cards, for both nvidia and amd. Often this information will also be in the specifications for the cards on the IHV site, but is is nice that wikipedia has a single page per vendor that you can search etc. There is a column in the tables for API support where you can see the DirectX version. Check if it is one of these recommended DX11 cards You may not have a DirectX 11 card and are interested in purchasing one. While I am in no position to make recommendations, I will list here some cards from two big IHVs that we know are DirectX 11 capable. Some AMD (aka ATI) cards Low end, inexpensive DX11 hardware: Radeon 5450, 5550, 6450, 6570 Mid range (decent perf, single precision): Radeon 5750, 5770, 6770, 6790 High end (capable of double precision): Radeon 5850, 5870, 6950, 6970 Single precision APUs: AMD E-Series APUs AMD A-Series APUs Some NVIDIA cards Low end, inexpensive DX11 hardware: GeForce GT430, GT 440, GT520, GTS 450 Quadro 400, 600 Mid-range (decent perf, single precision): GeForce GTX 460, GTX 550 Ti, GTX 560, GTX 560 Ti Quadro 2000 High end (capable of double precision): GeForce GTX 480, GTX 570, GTX 580, GTX 590, GTX 595 Quadro 4000, 5000, 6000 Tesla C2050, C2070, C2075 Get the DirectX SDK and run DirectX Caps Viewer Download and install the June 2010 DirectX SDK. As part of that you now have the DirectX Capabilities Viewer utility (find it in your start menu by searching for "DirectX Caps Viewer", the filename is DXCapsViewer.exe). It will list all your devices (emulated, and real hardware ones) under the first node. Expand the hardware entries and then expand again the Direct3D 11 folder. If you see D3D_FEATURE_LEVEL_11_ under that, then your card supports feature level 11 which means it supports DirectCompute and C++ AMP. In the following screenshot of one of my old laptops, the card only goes to feature level 10. Run a utility from the web that just tells you! Of course, writing some C++ AMP code that enumerates accelerators and lists the ones that are capable is trivial. However that requires that you have redistributed the runtime, so a more broadly applicable approach is to use the DX APIs directly to enumerate the DX11 capable cards. That is exactly what the development lead for C++ AMP has done and he describes and shares that utility at this post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Default Parameters vs Method Overloading

  - by João Angelo

  With default parameters introduced in C# 4.0 one might be tempted to abandon the old approach of providing method overloads to simulate default parameters. However, you must take in consideration that both techniques are not interchangeable since they show different behaviors in certain scenarios. For me the most relevant difference is that default parameters are a compile time feature while method overloading is a runtime feature. To illustrate these concepts let’s take a look at a complete, although a bit long, example. What you need to retain from the example is that static method Foo uses method overloading while static method Bar uses C# 4.0 default parameters. static void CreateCallerAssembly(string name) { // Caller class - Invokes Example.Foo() and Example.Bar() string callerCode = String.Concat( "using System;", "public class Caller", "{", " public void Print()", " {", " Console.WriteLine(Example.Foo());", " Console.WriteLine(Example.Bar());", " }", "}"); var parameters = new CompilerParameters(new[] { "system.dll", "Common.dll" }, name); new CSharpCodeProvider().CompileAssemblyFromSource(parameters, callerCode); } static void Main() { // Example class - Foo uses overloading while Bar uses C# 4.0 default parameters string exampleCode = String.Concat( "using System;", "public class Example", "{{", " public static string Foo() {{ return Foo(\"{0}\"); }}", " public static string Foo(string key) {{ return \"FOO-\" + key; }}", " public static string Bar(string key = \"{0}\") {{ return \"BAR-\" + key; }}", "}}"); var compiler = new CSharpCodeProvider(); var parameters = new CompilerParameters(new[] { "system.dll" }, "Common.dll"); // Build Common.dll with default value of "V1" compiler.CompileAssemblyFromSource(parameters, String.Format(exampleCode, "V1")); // Caller1 built against Common.dll that uses a default of "V1" CreateCallerAssembly("Caller1.dll"); // Rebuild Common.dll with default value of "V2" compiler.CompileAssemblyFromSource(parameters, String.Format(exampleCode, "V2")); // Caller2 built against Common.dll that uses a default of "V2" CreateCallerAssembly("Caller2.dll"); dynamic caller1 = Assembly.LoadFrom("Caller1.dll").CreateInstance("Caller"); dynamic caller2 = Assembly.LoadFrom("Caller2.dll").CreateInstance("Caller"); Console.WriteLine("Caller1.dll:"); caller1.Print(); Console.WriteLine("Caller2.dll:"); caller2.Print(); } And if you run this code you will get the following output: // Caller1.dll: // FOO-V2 // BAR-V1 // Caller2.dll: // FOO-V2 // BAR-V2 You see that even though Caller1.dll runs against the current Common.dll assembly where method Bar defines a default value of “V2″ the output show us the default value defined at the time Caller1.dll compiled against the first version of Common.dll. This happens because the compiler will copy the current default value to each method call, much in the same way a constant value (const keyword) is copied to a calling assembly and changes to it’s value will only be reflected if you rebuild the calling assembly again. The use of default parameters is also discouraged by Microsoft in public API’s as stated in (CA1026: Default parameters should not be used) code analysis rule.

  Read the article

• Is a university education really worth it for a good programmer?

  - by Jon Purdy

  The title says it all, but here's the personal side of it: I've been doing design and programming for about as long as I can remember. If there's a programming problem, I can figure it out. (Though admittedly StackOverflow has allowed me to skip the figuring out and get straight to the doing in many instances.) I've made games, esoteric programming languages, and widgets and gizmos galore. I'm currently working on a general-purpose programming language. There's nothing I do better than programming. However, I'm just as passionate about design. Thus when I felt leaving high school that my design skills were lacking, I decided to attend university for New Media Design and Imaging, a digital design-related major. For a year, I diligently studied art and programmed in my free time. As the next year progressed, however, I was obligated to take fewer art and design classes and more technical classes. The trouble was of course that these classes were geared toward non-technical students, and were far beneath my skill level at the time. No amount of petitioning could overcome the institution's reluctance to allow me to test out of such classes, and the major offered no promise for any greater challenge in the future, so I took the extreme route: I switched into the technical equivalent of the major, New Media Interactive Development. A lot of my credits moved over into the new major, but many didn't. It would have been infeasible to switch to a more rigorous technical major such as Computer Science, and having tutored Computer Science students at every level here, I doubt I would be exposed to anything that I haven't already or won't eventually find out on my own, since I'm so involved in the field. I'm now on track to graduate perhaps a year later than I had planned, which puts a significant financial strain on my family and my future self. My schedule continues to be bogged down with classes that are wholly unnecessary for me to take. I'm being re-introduced to subjects that I've covered a thousand times over, simply because I've always been interested in it all. And though I succeed in avoiding the cynical and immature tactic of failing to complete work out of some undeserved sense of superiority, I'm becoming increasingly disillusioned by the lack of intellectual stimulation. Further, my school requires students to complete a number of quarters of co-op work experience proportional to their major. My original major required two quarters, but my current requires three, delaying my graduation even more. To top it all off, college is putting a severe strain on my relationship with my very close partner of a few years, so I've searched diligently for co-op jobs in my area, alas to no avail. I'm now in my third year, and approaching that point past which I can no longer handle this. Either I keep my head down, get a degree no matter what it takes, and try to get a job with a company that will pay me enough to do what I love that I can eventually pay off my loans; or I cut my losses now, move wherever there is work, and in six months start paying off what debt I've accumulated thus far. So the real question is: is a university education really more than just a formality? It's a big decision, and one I can't make lightly. I think this is the appropriate venue for this kind of question, and I hope it sticks around for the sake of others who might someday find themselves in similar situations. My heartfelt thanks for reading, and in advance for your help.

  Read the article

• How to prepare for a programming competition? Graphs, Stacks, Trees, oh my! [closed]

  - by Simucal

  Last semester I attended ACM's (Association for Computing Machinery) bi-annual programming competition at a local University. My University sent 2 teams of 3 people and we competed amongst other schools in the mid-west. We got our butts kicked. You are given a packet with about 11 problems (1 problem per page) and you have 4 hours to solve as many as you can. They'll run your program you submit against a set of data and your output must match theirs exactly. In fact, the judging is automated for the most part. In any case.. I went there fairly confident in my programming skills and I left there feeling drained and weak. It was a terribly humbling experience. In 4 hours my team of 3 people completed only one of the problems. The top team completed 4 of them and took 1st place. The problems they asked were like no problems I have ever had to answer before. I later learned that in order to solve them some of them effectively you have to use graphs/graph algorithms, trees, stacks. Some of them were simply "greedy" algo's. My question is, how can I better prepare for this semesters programming competition so I don't leave there feeling like a complete moron? What tips do you have for me to be able to answer these problems that involve graphs, trees, various "well known" algorithms? How can I easily identify the algorithm we should implement for a given problem? I have yet to take Algorithm Design in school so I just feel a little out of my element. Here are some examples of the questions asked at the competitions: ACM Problem Sets Update: Just wanted to update this since the latest competition is over. My team placed 1st for our small region (about 6-7 universities with between 1-5 teams each school) and ~15th for the midwest! So, it is a marked improvement over last years performance for sure. We also had no graduate students on our team and after reviewing the rules we found out that many teams had several! So, that would be a pretty big advantage in my own opinion. Problems this semester ranged from about 1-2 "easy" problems (ie bit manipulation, string manipulation) to hard (graph problems involving fairly complex math and network flow problems). We were able to solve 4 problems in our 5 hours. Just wanted to thank everyone for the resources they provided here, we used them for our weekly team practices and it definitely helped! Some quick tips that I have that aren't suggested below: When you are seated at your computer before the competition starts, quickly type out various data structures that you might need that you won't have access to in your languages libraries. I typed out a Graph data-structure complete with floyd-warshall and dijkstra's algorithm before the competition began. We ended up using it in our 2nd problem that we solved and this is the main reason why we solved this problem before anyone else in the midwest. We had it ready to go from the beginning. Similarly, type out the code to read in a file since this will be required for every problem. Save this answer "template" someplace so you can quickly copy/paste it to your IDE at the beginning of each problem. There are no rules on programming anything before the competition starts so get any boilerplate code out the way. We found it useful to have one person who is on permanent whiteboard duty. This is usually the person who is best at math and at working out solutions to get a head start on future problems you will be doing. One person is on permanent programming duty. Your fastest/most skilled "programmer" (most familiar with the language). This will save debugging time also. The last person has several roles between assessing the packet of problems for the next "easiest" problem, helping the person on the whiteboard work out solutions and helping the person programming work out bugs/issues. This person needs to be flexible and be able to switch between roles easily.

  Read the article

< Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >