Search Results

Search found 14989 results on 600 pages for 'street address'.

Page 183/600 | < Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >

  • hMailServer Email + MX Records Configuration

    - by asn187
    Trying to make DNS changes to enable email to be sent using hMailServer. My mail server is on a separate machine with a separate IP Address. I have already added MyDomain.com and an email account I have create a MX Record with the mail server being mail.domain.com an a priority on 20. 1) But the question is how do I now link this MX record for the domain to my mail server/ mail server IP Address? 2) What changes are needed in hMailServer to complete the process and be able to send emails for the domain? 3) In Settings SMTP Delivery of email: What should my configuration here look like?

    Read the article

  • Secondary DHCP server won't start on Centos 6.2

    - by Slowjoe
    I'm trying to create a backup DHCP server. Server times are in sync. Primary server starts fine. Secondary server won't start. Error from /var/log/messages is: Sep 15 14:47:45 stream dhcpd: Copyright 2004-2010 Internet Systems Consortium. Sep 15 14:47:45 stream dhcpd: All rights reserved. Sep 15 14:47:45 stream dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 25: invalid statement in peer declaration Sep 15 14:47:45 stream dhcpd: #011max-response-default Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 41: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 49: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in. Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 70: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 78: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: Configuration file errors encountered -- exiting Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: This version of ISC DHCP is based on the release available Sep 15 14:47:45 stream dhcpd: on ftp.isc.org. Features have been added and other changes Sep 15 14:47:45 stream dhcpd: have been made to the base software release in order to make Sep 15 14:47:45 stream dhcpd: it work better with this distribution. Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: Please report for this software via the CentOS Bugs Database: Sep 15 14:47:45 stream dhcpd: http://bugs.centos.org/ Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: exiting. Config file contents: # DHCP Server Configuration file. # see /usr/share/doc/dhcp*/dhcpd.conf.sample # see 'man 5 dhcpd.conf' # option domain-name "eng.foo.com"; option domain-name-servers ns0.eng.foo.com, ns1.eng.foo.com; option ntp-servers ntp.eng.foo.com; #option time-servers ntp.eng.foo.com; default-lease-time 3600; max-lease-time 7200; authoritative; log-facility local7; failover peer "dhcp-failover" { secondary; address 10.0.1.70; port 647; peer address 10.0.1.11; peer port 647; max-response-default 30; max-unacked-updates 10; load balance max seconds 3; } # # Management subnet # subnet 10.0.0.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.0.255; option routers 10.0.0.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.0.240 10.0.0.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.0.150 10.0.0.199; deny unknown-clients; } include "/etc/dhcp/dhcpd.conf-engmgmt"; } # # Data subnet # subnet 10.0.1.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.1.255; option routers 10.0.1.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.1.240 10.0.1.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.1.150 10.0.1.199; deny unknown-clients; } # For centos network installs if substring (option vendor-class-identifier, 0, 8) = "anaconda" { filename "/autohome/distro/ks/"; next-server eng-data.eng.foo.com; } # For PXE network installs if substring (option vendor-class-identifier, 0, 9) = "PXEClient" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } # For KVM PXE network installs if substring (option vendor-class-identifier, 0, 9) = "Etherboot" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } include "/etc/dhcp/dhcpd.conf-engdata"; }

    Read the article

  • setting up a WGR614v7 behind a linux box

    - by commodore fancypants
    Here's the setup, I have an openSUSE box with 2 NICs, one goes to my home network router, the other has DHCP running and it attached to a wireless router. I'm trying to get this setup to work before I switch to the linux box as my home network router. My DHCP will offer the wireless router (a WGR614v7) an address, but anything that connects to the wireless router ends up with a APIPA address. I have all the firewalls on the wireless network turned off as well as the wireless router's own DHCP. The linux box isn't offering addresses to anything past the wireless router. Is this a problem with the router or my DHCP setup? For testing purposes, I have both NICs set in the internal zone and I've tried wireless and wired connections to the WGR614v7 both to no avail.

    Read the article

  • How do I receive email sent to postmaster?

    - by jonescb
    I have a VPS server that I would like to get an SSL certificate for, and the CA needs an email address to verify that I own the domain. The options are: [email protected], [email protected], [email protected], and an address to @whoisguard.com. The server runs CentOS 5, and all I have set up for email is sendmail. I don't have POP3 or IMAP. According to this Wikipedia article on Postmaster, it says that all SMTP servers support postmaster and it cites RFC 5321. Does sendmail conform to this? I tried sending a test mail to [email protected], but I don't know how to receive it on my server. Do I need to open up any ports? I haven't gotten a message back saying that my test mail failed to send, so my server must have gotten it.

    Read the article

  • AWS forwarding email to a gmail account

    - by user2433617
    So I registered a domain name. I then set up a static webpage using aws (S3 and Rout53). Now what I want to do is forward any email I get from that custom domain name to a personal email address I have set up. I can't seem to figure out how to do this. I have these record sets already: A NS SOA CNAME I believe I have to set up an MX record but not sure how. say I have the custom domain [email protected] and I want to redirect all email to [email protected]. The personal email account is a gmail (google accounts) email address. Thanks.

    Read the article

  • Can't SSH into a Vagrant Virtual Machine

    - by Christopher Ickes
    Local Vagrant machine installed at ip address 10.0.0.23 and hostname lamp-vm. Using vagrant ssh I can connect just fine and do everything I need. This creates an ERROR - ssh vagrant@lamp-vm -v -v and I get debug1: connect to address 10.0.0.23 port 22: Connection timed out ssh: connect to host lamp-vm port 22: Connection timed out My etc/hosts file contains 10.0.0.23 lamp-vm. My .ssh/config file looks like Host lamp-vm User vagrant IdentityFile ~/.ssh/vagrant I have tried the ssh command with and without the -i /path/to/.sh/identity_file as well. How do I connect to my Vagrant Virtual Machine using SSH?

    Read the article

  • forward all mail on a specified domain to script

    - by David
    Hey all! I run a disposable e-mail service that accepts all incoming mail and forwards it to a PHP script that stores it in a database for people to view. Before now, I have been on shared hosting with cPanel, which makes it easy to pipe e-mails to a script. Now, however, I got my own VPS, and it doesn't have cPanel. How do I pipe e-mails to script? Further, how do I pipe emails to any address on certain specified domains to my script? You see, aside from the main domain, there are several alternate domains that people can use if the main domain is blocked, and on each domain I want any address to be usable (xyz@domain, abc@domain, anythingelse@domain). The VPS has Ubuntu 9.04 installed, and I have been experimenting with Postfix, though I can switch to Exim or Sendmail if it is easier.

    Read the article

  • Silverlight Cream for May 01, 2010 -- #853

    - by Dave Campbell
    In this Issue: Damian Schenkelman, Rob Eisenberg, Sergey Barskiy, Victor Gaudioso, CorrinaB, Mike Snow, and Adam Kinney. From SilverlightCream.com: Prism’s future: Trying to summarize things Damian Schenkelman collected links to the latest Prism information to provide a reference post, including discussing WP7. MVVM Study - Interlude Rob Eisenberg discusses MVVM - it's beginnings and links out to all the major players old and new. Windows Phone 7 Database Here we go... Sergey Barskiy converted his Silverlight database project to WP7, and it's available on CodePlex... cool! New Silverlight Video Tutorial: How to Save an Image in Your Silverlight Applications Victor Gaudioso has a new video tutorial up... demonstrating saving an image from Silverlight to your hard disk. He also has the source files for download. Enforce Design Guidelines With Styles And Behaviors CorrinaB has a post up discussing attaching behaviors in styles. She has a couple good examples and a sample project to download. Silverlight Tip of the Day #9 – Obtaining Your clients IP Address Mike Snow has Tip number 9 up and he's explaining how to find the client IP address even though it's not natively available from Silverlight or jscript. Expression Blend 4 for Windows Phone in 90 seconds Adam Kinney talks about the release of a new version of the Expression Blend add-in for WP7. He's got links and instructions for removing and upgrading. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • TCP/IP- what is it exactly?

    - by OckhamsRazor
    I know that this question sounds stupid, but over all these years, I still have difficulty explaining TCP/IP to people. I don't completely get it myself, and even after reading up on it, the distinction is not very clear. What I get so far is that IP deals with networks while TCP involves delivery of messages over that network. I'm not totally convinced though. Also, they reside on different layers of the Internet architecture. Could anyone disambiguate this distinction using a simple analogy or examples? Also, I read this somewhere The difference is that TCP is responsible for the data delivery of a packet and IP is responsible for the logical addressing. In other words, IP obtains the address and TCP guarantees delivery of data to that address. Is this correct? Thanks for helping me out. One last thing- Where does the ethernet come in all of this?

    Read the article

  • tagging all email addresses from my mac microsoft outlook 2011

    - by N.Sankar
    I have been using Outlook for Mac 2011 for last 2 years. Now I want to list out all the people in my email correspondences (sent and inbox) and send them one email. Where can I find the database of everyone's email address in my Mac? The mail will have to have email addresses one after another like this: [email protected], [email protected] all in the format which is accepted in outlook and which can be emailed immediately. I need to basically tag all my email address to send them one email.

    Read the article

  • CRM at Oracle Series: Do Not Call & Do Not Email

    - by tony.berk
    Who you gonna call? Or not call! Sorry, just kidding, this isn't a movie blog! Do Not Call is an important topic for all businesses as there are government regulations that can lead to significant fines, and of course, possible damage to your brand. Oracle leverages Siebel CRM to develop an effective solution to address the Do Not Call and Email Permissible Use requirements. The application uses the Contacts functionality to manage communication preferences, which when defined, centrally synchronizes all contact records that share the same phone number and email address. Additionally, the relevant information is masked so Oracle employees cannot accidentally reach out to the contact. Therefore, the solution ensures that we are compliant with regulations, enables us to respect individuals' communication preferences and provides an audit trail of changes to their preferences. Today's CRM at Oracle slidecast discusses the requirements, highlights benefits and provides screen shots of the solution. CRM at Oracle Series: Do Not Call & Do Not Email Click here to learn more about Siebel CRM and other Oracle CRM products. Are you enjoying the CRM at Oracle Series? We are working on more topics for this year, but if there is a particular CRM area or function which you'd like to hear how Oracle implemented it internally, leave us a comment and we'll try to get it on our list.

    Read the article

  • It&rsquo;s About You: Tell Microsoft How They&rsquo;re Doing!

    - by juanlarios
    Every fall and spring, a survey goes out to a few hundred thousand IT folk in Canada asking what they think of Microsoft as a company. The information they get from this survey helps them understand what problems and issues you’re facing and how they can do better. The team at Microsoft Canada takes the input they get from this survey very seriously. Now I don’t know who of you will get the survey and who won’t but if you do find an email in your inbox from "Microsoft Feedback” with an email address of “ [email protected] ” and a subject line “Help Microsoft Focus on Customers and Partners” from now until April 13th — it’s not a hoax or phishing email. Please open it and take a few minutes to tell them what you think. This is your chance to get your voice heard: If they’re doing well, feel free to pile on the kudos (they love positive feedback!) and if you see areas they can improve, please point them out so they can make adjustments (they also love constructive criticism!). The Microsoft team would like to thank you for all your feedback in the past — to those of you who have filled out the survey and sent them emails. Thank you to all who engage with them in so many different ways through events, the blogs, online and in person. You are why they do what they do and they feel lucky to work with such a great community! One last thing - even if you don’t get the survey you can always give the team feedback by emailing us directly through the Microsoft Canada IT Pro Feedback email address . They want to make sure they are serving you in the best possible way. Tell them what you want more of. What should they do less of or stop altogether? How can they help? Do you want more cowbell ? Let them know through the survey or the email alias. They love hearing from you!

    Read the article

  • Direct URL to a Google docs revision

    - by user12889
    I have a Google doc document. Using Edit-File-See Revision History I can see older revisions and go to them. I want to give some-one a URL which points directly to a specific revision of my document which is not the current one. How do I do this? (Note: The link from the revision list does not work outside that list, if you enter it in the address bar you just get the list, not the document; the URL in the address bar when you load the older revision does not work either)

    Read the article

  • How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

    - by Philip Durbin
    Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake } May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset May 5 16:54:45 fs-2 kernel: ata1: soft resetting link May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:54:55 fs-2 kernel: ata1: soft resetting link May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:05 fs-2 kernel: ata1: soft resetting link May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps May 5 16:55:40 fs-2 kernel: ata1: soft resetting link May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up May 5 16:55:45 fs-2 kernel: ata1: EH complete I tried a couple things to make the server find the new /dev/sda, such as rescan-scsi-bus.sh but they didn't work: [root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan -bash: echo: write error: Invalid argument [root@fs-2 ~]# [root@fs-2 ~]# /root/rescan-scsi-bus.sh -l [snip] 0 new device(s) found. 0 device(s) removed. [root@fs-2 ~]# [root@fs-2 ~]# ls /dev/sda ls: /dev/sda: No such file or directory I ended up rebooting the server. /dev/sda was recognized, I fixed the software RAID, and everything is fine now. But for next time, how can I make Linux recognize a new SATA drive I have hot swapped in without rebooting? The operating system in question is RHEL5.3: [root@fs-2 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) The hard drive is a Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, model ST3500320NS. Here is the lscpi output: [root@fs-2 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) Update: In perhaps a dozen cases, we've been forced to reboot servers because hot swap hasn't "just worked." Thanks for the answers to look more into the SATA controller. I've included the lspci output for the problematic system above (hostname: fs-2). I could still use some help understanding what exactly isn't supported hardware-wise in terms of hot swap for that system. Please let me know what other output besides lspci might be useful. The good news is that hot swap "just worked" today on one of our servers (hostname: www-1), which is very rare for us. Here is the lspci output: [root@www-1 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)

    Read the article

  • Constructing radiotap header and ieee80211 header structures for packet injection

    - by hektor
    I am trying to communicate between two laptop machines using Wifi. The structure of the radiotap header and ieee80211 header I am using is: struct ieee80211_radiotap_header { unsigned char it_version; uint16_t it_len; uint32_t it_present; }; /* Structure for 80211 header */ struct ieee80211_hdr_3addr { uint16_t frame_ctl[2]; uint16_t duration_id; unsigned char addr1[ETH_ALEN]; unsigned char addr2[ETH_ALEN]; unsigned char addr3[ETH_ALEN]; uint16_t seq_ctl; }; struct packet { struct ieee80211_radiotap_header rtap_header; struct ieee80211_hdr_3addr iee802_header; unsigned char payload[30]; }; /* In main program */ struct packet mypacket; struct ieee80211_radiotap_header ratap_header; struct ieee80211_hdr_3addr iee802_header; unsigned char addr1[ETH_ALEN] = {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}; /* broadcast address */ unsigned char addr2[ETH_ALEN] = {0x28,0xcf,0xda,0xde,0xd3,0xcc}; /* mac address of network card */ unsigned char addr3[ETH_ALEN] = {0xd8,0xc7,0xc8,0xd7,0x9f,0x21}; /* mac address of access point i am trying to connect to */ /* Radio tap header data */ ratap_header.it_version = 0x00; ratap_header.it_len = 0x07; ratap_header.it_present = (1 << IEEE80211_RADIOTAP_RATE); mypacket.rtap_header = ratap_header; /* ieee80211 header data */ iee802_header.frame_ctl[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_BEACON; iee802_header.frame_ctl[1] =IEEE80211_FC1_DIR_NODS; strcpy(iee802_header.addr1,addr1); strcpy(iee802_header.addr2,addr2); strcpy(iee802_header.addr3,addr3); iee802_header.seq_ctl = 0x1086; mypacket.iee802_header=iee802_header; /* Payload */ unsigned char payload[PACKET_LENGTH]="temp"; strcpy(mypacket.payload , payload); I am able to receive the packets when I test the transmission and reception on the same laptop. However I am not able to receive the packet transmitted on a different laptop. Wireshark does not show the packet as well. Can anyone point out the mistake I am making?

    Read the article

  • Ping computername - result format

    - by kamleshrao
    Hi, I am trying PING command on my Windows 7 PC after many months. While doing this, I notice the following result: Ping using computer name: D:\>ping amdwin764 Pinging AMDWIN764 [fe80::ac53:546f:a730:8bd6%11] with 32 bytes of data: Reply from fe80::ac53:546f:a730:8bd6%11: time=1ms Reply from fe80::ac53:546f:a730:8bd6%11: time=1ms Reply from fe80::ac53:546f:a730:8bd6%11: time=1ms Reply from fe80::ac53:546f:a730:8bd6%11: time=1ms Ping statistics for fe80::ac53:546f:a730:8bd6%11: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms Ping using IP address: D:\>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.2: bytes=32 time=75ms TTL=128 Reply from 192.168.1.2: bytes=32 time=1ms TTL=128 Reply from 192.168.1.2: bytes=32 time=1ms TTL=128 Reply from 192.168.1.2: bytes=32 time=1ms TTL=128 Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 75ms, Average = 19ms Why am I not getting the Ping results with Numeric IP address in my first example? Thanks, Kamlesh

    Read the article

  • Windows 8 Pro Remote Desktop issue

    - by Mike C.
    I have a weird issue here. I'm running Windows 8 Pro. The client computer is also running Windows 8 Pro. Remote Desktop works when I'm in the same network. I tried connecting using my external IP Address and my DynDNS account, neither works. I disabled Windows Firewall and setup DMZ for my computer on the router, still can't get remote desktop to work. I verified www.canyouseeme.org, port 3389 is open, which is obvious since I'm running DMZ! My ISP, Bell Canada (modem/router: Sagemcom F@st 2864), blocks port 80 and 25, but I don't need those for RDP, do I? The funny thing is RDP rejects the connection instantaneously for my IP or DynDNS while it takes a while for another address. Thank you, Michael

    Read the article

  • How to create an alias for linux server name?

    - by Radek
    The openSUSE server name is 'darkhelmet'. I want to create an alias 'dh' for it. So I can also type 'ssh dh' and 'http://dh' would work too. What file/files and where do I have to edit to make this happen? Extract from /etc/hosts from darkhelmet 127.0.0.1 localhost # special IPv6 addresses ::1 localhost ipv6-localhost ipv6-loopback fe00::0 ipv6-localnet ff00::0 ipv6-mcastprefix ff02::1 ipv6-allnodes ff02::2 ipv6-allrouters ff02::3 ipv6-allhosts 127.0.0.2 darkhelmet.edumate darkhelmet 10.0.0.22 db2workgroup db2workgroup [root][skroob] nslookup darkhelmet Server: 10.0.0.10 Address: 10.0.0.10#53 Name: darkhelmet.edumate Address: 10.0.0.22

    Read the article

  • Cisco VPN disconnects after 5 seconds with error 422

    - by Marius
    I'm trying to connect to my university's server with VPN using Cisco VPN Client version 5.0.04, but after 5 seconds it disconnects with the error message 422: Lost contact with the secure gateway. Check your connection. From my research on the net it seems this could be because it tries to find my IP, and finds out that this is 127.0.0.1. Then 5 seconds later it discovers that I have a new IP (my actual IP), and it disconnects because I'm not allowed to change IP. Does anyone know how I could fix this, or if there is another reason i get this error? Update I looked through the log, and found this error, which confirms what I thought, except it gets the correct IP first, then changes it to localhost. 87 18:56:53.250 08/24/09 Sev=Warning/3 CM/0xA3100027 Adapter address changed from 149.171.237.25. Current address(es): 127.0.0.1.

    Read the article

  • Java, the Cloud, and Oracle at QCon San Francisco 2011

    - by Bob Rhubart
    If you're part of the lucky bunch attending this week's sold-out QCon San Francisco conference at Westin San Francisco Market Street, I'd like to bring several sessions to your attention. On Wednesday Nov 16, Alex Buckley, specification lead for the Java Language and the Java Virtual Machine at Oracle, will present Java 7 and 8: Where We've Been, Where We're Going, part of the Why is Java still sexy? track. The session begins at 10:35 a.m. in the Olympic room. On Thursday Nov 17, Tyler Jewell, VP Product Management for Oracle's Platform as a Service, will participate in the Performance and Scalability Panel moderated by InfoQ founder and QCon SF Program Committee Member Floyd Marinescu. That panel, part of the Performance and Scalability Solutions track, begins at 10:35 a.m. in the Olympic room. Following that panel discussion, Tyler will fly solo with a presentation on Java EE 7: Developing for the Cloud, also part of the Performance and Scalability Solutions track. That session kicks off at 12:05 p.m., also in the Olympic room. On Friday Nov 18 Tyler will jump tracks, so to speak, when he presents The Architecture of Oracle's Public Cloud, part of the Architecture Case Studies: Cloud track. That session begins at 4:50 p.m. in the Stanford room. Of course, QCon also offers ample meet-and-greet opportunities. One such opportunity happens in the hospitality suite hosted by the Java Community Process Executive Committee. That shindig gets in gear at 5:50 pm on Thursday. Throughout the QCon San Francisco conference, members of the OTN team (including your's truly) and members of the Oracle Fusion Middleware team will be on hand at the OTN booth in the conference lobby. Stop by to say hello, score some swag, and catch a demo or two.

    Read the article

  • Port binding conflicts with "switch user" on Windows 7

    - by C-dizzle
    We are using the switch user function within Windows 7 under an active directory network. We have one application in particular that gives us an error: Only one usage of each socket address (protocol/network address/port) is normally permitted. bind Port 10001 Are there any other ports that can only be used at one time that might have an adverse effect on the other user? We try to mentor our users to use the log off function instead of switch user, but that doesn't always happen. As an alternative, is it possible to disable the 'switch user' button on our machines?

    Read the article

  • Failed reverse DNS and SPF only when using Thunderbird!

    - by TruMan1
    I have a reverse DNS and SPF records correctly setup for my mail server. Sending webmail from it works perfect. The problem is when Thunderbird sends out emails, it is using the client's IP address for the hostname. I have SMTP authentication and specified my mail server's as the outgoing SMTP. Mail is being sent, but it is not "signing" the email with the mail server's IP address.. it is using the client's. Is there any way to fix this? This is the spam error I get when sending from Thunderbird: Spam: Reverse DNS Lookup, SPF_SoftFail

    Read the article

  • ICMP - TTL - Trace Route

    - by dbasnett
    I asked this question at Stack Overflow and then thought this may be the better place to ask. Given the following situation: PC --- |aa RTR1 bb| --- |aa RTR2 bb| --- |aa RTR3 bb| etc Each of the |aa rtr bb| is meant to be a router with two ports aa and bb. My question is this. When you do a trace route from PC which router port address should respond with time to live exceeded in transit message? I seem to remember being taught to think of the router as being in as many parts as ports, so that in my scenario when aa is forwarding the packet to bb and decrements the ttl to 0, it will be the address of the aa port in the failure message. I am trying to find the definitive answer. Thanks.

    Read the article

  • Exchange read receipt are delivered to recipient instead of sender

    - by Exchange33
    We have two interconnected Exchange organizations: Exchange 2003 and Exchange 2013. When users ask for read receipt in Outlook these receipts are delivered correctly within each organization. However when Exchange 2003 users send messages to Exchange 2013 users the read receipts are delivered to the Exchange 2013 recipients and instead of the message senders. We analyzed the message content at the recipient side and it looks like the message arrives with an incorrect ReadReceiptEntryID field. The field must contain the sender's address but it contains the recipient address instead. What can be the cause of the issue?

    Read the article

  • VPN - force a selective range of ip to run on VPN (linux)

    - by Francesco
    Preface: I know there are similar question here and there however I'm a kind of newbie on Net stuff so I need an answer on this specific scenario, hoping that can help others too as it is a common problem Let say I cannot do anything on the local switch to change the local ip range, I don't want to use any complicate trick as use VMachine to hide the local ip range but I want to use net tools to solve the issue. Scenario my local net assign me an IP of this class 192.168.1.xxx (ex. 192.168.1.116) and my VPN (VPNC) assign me IP of same class 192.168.1.xxx (ex. 192.168.1.247) Obviously I need VPN to access local address (ex. 192.168.1.100) but when I open any address of the class 192.168.1.xx the route point to my local net and not to the VPN ones. I'm on linux and i'd like gui solution (network manager) in case it is not possible let play with route command. here what network manager offer me: Here my actual route once connected to the VPN: Here some route information (route -n) Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 182.71.21.106 192.168.1.1 255.255.255.255 UGH 0 0 0 wlan0 182.71.21.106 192.168.1.1 255.255.255.255 UGH 0 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 9 0 0 wlan0 192.168.1.246 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 Here my ifconfig : ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.1.247 P-t-P:192.168.1.246 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1 RX packets:3415 errors:0 dropped:0 overruns:0 frame:0 TX packets:2525 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:3682328 (3.6 MB) TX bytes:402315 (402.3 KB) wlan0 Link encap:Ethernet HWaddr 4c:eb:42:06:a3:a6 inet addr:192.168.1.116 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::4eeb:42ff:fe06:a3a6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:72598 errors:0 dropped:0 overruns:0 frame:0 TX packets:42300 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:76000532 (76.0 MB) TX bytes:13919400 (13.9 MB) The Question So basically I would like to add a rule to force this particular address (192.168.1.100) on the VPN and not on my local net

    Read the article

< Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >