Search Results

Search found 45949 results on 1838 pages for 'super tomtom'.

Page 183/1838 | < Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >

• Used HDD/ran DiskSmartView/40,000 Power-on-hours?? should i trust it w/ my data, or take it back and bitch?

  - by David Lindsay

  I just bought a used hard drive from a University Surplus Store. Decided to run DiskSmartView to make sure it wasn't ready to fail. 40,000 power-on-hours I don't know if I feel like trusting my data to something that used. I really dont know if thats unreasonably old, but when i compare it to the POH reading i get when testing my other hdds its more than 3x older (my others have 2110 hours, 6150 hours, etc.. It's a Western Digital, so that gives me a little bit of hope(WDC WD4000KD-00NAB0). I could sure use someone else's opinion here. Thanks, DAVE

  Read the article

• PXE boot very slow when PXE server is virtualbox

  - by sqrtsben

  As I read in questions here and on the Internet, PXE and Virtualbox don't seem to like each other too much. My problem is the following: I have a virtualized machine which hosts the DHCP and PXE server for 10 native clients. They are rebooted roughly every 10 mins and on each reboot, they need to boot a small linux (the initrd is ~4MB). Before, I had a native machine running and booting via PXE was very fast. Now, looking at the output of nload, I only get 500kbit/s whenever one machine is booting. The machines are connected via a GBit switch, so that can't be it. Also, when testing the connection speed to the outside, I have the full bandwidth available. Is VBox just unable to deal with large amounts of UDP packets? Can anyone point me in the right direction here?

  Read the article

• Combining two operators in Evil-mode Emacs

  - by Dyslexic Tangent

  In vim I've remapped > and < when in visual mode to >gv and <gv respectively, like so: vnoremap > >gv vnoremap < <gv Since my target for this question are folks experienced with emacs and not vim, what > and < do is indent/dedent visually selected text. What gv does is reselect the previously selected text. These maps cause > and < to indent/dedent and then reselect the previously selected text. I'm trying out emacs with evil-mode and I'd like to do the same, but I'm having some difficulty figuring out how, exactly, to accomplish the automatic reselection. It looks like I need to somehow call evil-shift-right and evil-visual-restore sequentially, but I don't know how to create a map that will do both, so I tried creating my own function which would call both sequentially and map that instead, but it didn't work, possibly due to the fact that both of them are defined, not as functions with defun but instead as operators with evil-define-operator. I tried creating my own operators: (evil-define-operator shift-left-reselect (beg end) (evil-shift-left beg end) (evil-visual-restore)) (evil-define-operator shift-right-reselect (beg end) (evil-shift-right beg end) (evil-visual-restore)) but that doesn't restore visual as expected. A stab in the dark gave me this: (evil-define-operator shift-left-reselect (beg end) (evil-shift-left beg end) ('evil-visual-restore)) (evil-define-operator shift-right-reselect (beg end) (evil-shift-right beg end) ('evil-visual-restore)) but that selects one additional line whenever it is supposed to reselect. For now I've been using the following, which only has the problem where it reselects an additional line in the < operator. (evil-define-operator shift-right-reselect (beg end) (evil-shift-right beg end) (evil-visual-make-selection beg end)) (evil-define-operator shift-left-reselect (beg end) (evil-shift-left beg end) (evil-visual-make-selection beg end)) and I've mapped them: (define-key evil-visual-state-map ">" 'shift-right-reselect) (define-key evil-visual-state-map "<" 'shift-left-reselect) any help / pointers / tips would be greatly appreciated. Thanks in advance.

  Read the article

• Taskbar disappears sometimes when using a second monitor

  - by Alcenaia

  Windows 7 laptop, docked with a second monitor. This problem started happening when I started using the second monitor. The taskbar will often stop displaying. The Windows logo remains, but the bar, system tray, clock, and any icons for minimized programs disappear. I can see part of my desktop wallpaper where the taskbar should be. The taskbar is not set to auto-hide. Killing the explorer.exe process and starting it again temporarily fixes this. Is there a permanent solution? Thanks!

  Read the article

• Image thumbnails flashes and then disappears in Windows Vista

  - by Hemant

  I have Windows Vista installed on my machine and I am facing this really annoying problem. Whenever I open a folder having images, image thumbnails appear for an instant and they are replaced by standard file icon. Argh... Points to note: Setting "Always show icon, never thumbnail" is unchecked Running Windows Aero theme (with transparency support) Have 4GB of RAM on my machine so memory is not a problem Please can you suggest a solution?

  Read the article

• external drive enclosure -> software RAID 5?

  - by memilanuk

  Hello all, I have two older PCs on my LAN posing as 'servers'... one running FreeNAS off a USB stick using three 500GB hdds in a ZFS RAID-Z pool serving as storage for the LAN and one running Debian Lenny with an 80GB drive used as a general purpose 'tinker' box that I can ssh into, etc. Problem is that the SMART report for one of those 500GB drives in the FreeNAS box is showing some pre-failure attributes, and the whole array is a little small anyways. Rather than simply replace one 500GB drive with another 500GB drive, and have no backup of the file server, I'd like to upgrade all the drives to 2TB ones - but I have no where to store that much data in the mean while. As such, I started looking at getting a 4-bay external drive enclosure with an eSATA card for the Debian box, with the hopes of creating a RAID5 + LVM setup using those drives and backing the data up to that external drive enclosure. After the backup is done, replace the drives in the FreeNAS box and rebuild the array there and mirror the data back. Then, I'd have both the primary storage (on the FreeNAS box) and a backup (which I don't have currently) using the external drive enclosure on the Debian box. My big question is... most of these external drive boxes seem to claim support for JBOD, RAID 0, 1, 10, 5, etc. - should I presume that is simply fake RAID like many commodity mobos have, and not really usable in Linux? In that case, with all the drives hanging off the one eSATA connection, will Linux (specifically Debian Squeeze, as I plan on upgrading that box here shortly) see all four drives, or just the first one? Will I be able to configure them in a RAID5 array as desired? Thanks, Monte

  Read the article

• How can I determine what codec is being used?

  - by jldugger

  This forum comment and this superuser answer suggest that the audio compression contributes to loss of quality. I've noticed that music played over my BT setup sometimes pitch bends in ways I don't remember the original doing, and I'm wondering if SBC has something to do with it. I'm using Ubuntu 10.10 on a Mac Pro, connecting to a pair of Sony DR-BT50's. Is there a way to inspect which Bluetooth codec pulseaudio is using, what codecs both ends of the bluetooth link support?

  Read the article

• Acer Laptop does not power up after repairing DC power jack

  - by Misbah Mashkoor

  I have an Acer travelmate laptop which (by mistake) I dropped on the floor with the power jack side down, with the charger connected and it broke the DC jack from the inside of the laptop. Then I unscrewed the laptop and soldered the DC jack back and then plugged it in and switched on the laptop without the batteries. It did switch on, that was before screwing everything back. Then after assembling the whole thing back it does not power up. So I disassembled it again and just took the part which contained the DC jack (My laptop is like in two parts one contains the power jack which then sits on some pins on the main PCB) to a technician and he said that if you had connected this to a motherboard then it would have burnt cause the soldering was not right. And then I checked with my laptop again by connecting everything the light (the charging light) comes on when I connect the power but it does not switch on. Right now nothing is connected to the laptop; no HD, CD ROM, RAM , Battery. Nothing! Even then it does not power up. Any suggestions?

  Read the article

• Mouse button and keypress counter for Windows XP

  - by Yuval F

  I am trying to kick the habit of using a mouse where I could use keyboard shortcuts, for ergonomic reasons. I believe that if I see some statistics of my use of both input devices, I could reduce my use of mouse clicks. Do you know of any free software I can install on my Windows XP machine that counts keypresses and mouse button presses and displays an hourly/daily report? No fancy GUI is needed - just two summary lines.

  Read the article

• pam debugging "check pass; user unknown"

  - by lvc

  I am attempting to get Prosody authenticating with its auth_pam module. It is configured to use the pam service name xmpp. The pam.d/xmpp file is copied straight from the one configured for dovecot (originally taken from, I think, dovecot's documentation), which is known to be working: # cat /etc/pam.d/xmpp auth required pam_unix.so nullok debug account required pam_unix.so debug Logging in with dovecot works wonderfully. Logging in with prosody, with exactly the same username and password, causes Prosody to return 'Not authorized', and the following in journalctl -f: Oct 29 22:12:14 riscque.net prosody[9396]: c2s1d010b0: Client sent opening <stream:stream> to riscque.net Oct 29 22:12:14 riscque.net prosody[9396]: c2s1d010b0: Sent reply <stream:stream> to client Oct 29 22:12:14 riscque.net prosody[9396]: [178B blob data] Oct 29 22:12:14 riscque.net unix_chkpwd[9408]: check pass; user unknown Oct 29 22:12:14 riscque.net prosody[9396]: pam_unix(xmpp:auth): conversation failed Oct 29 22:12:14 riscque.net prosody[9396]: pam_unix(xmpp:auth): unable to obtain a password Oct 29 22:12:14 riscque.net prosody[9396]: pam_unix(xmpp:auth): auth could not identify password for [lvc] Oct 29 22:12:14 riscque.net prosody[9396]: riscque.net:saslauth: sasl reply: <failure xmlns='urn:ietf:params:xml:ns:xmpp-sasl'><not-authorized/><text>Unable to authorize you with the authentication credentials you&apos;ve sent.</text></failure> This series of errors seems mutually contradictory - first it says "user unknown", but then that it can't obtain the password for lvc - this username certainly exists on the system. What is likely going on here, and how would I debug this further?

  Read the article

• Ubuntu: How to login without entering username and password

  - by torbengb

  I'm a newbie running Ubuntu 9.10. I have two users (wife and me), and each user's screensaver is set to lock so that on wakeup, we get to choose which user's desktop to go to. However, Ubuntu requires a password, so this is pretty tedious. I'd like to switch users without entering any password. I know about this trick that works for the boot login, but it doesn't deal with multiple users. Is it possible to set empty passwords for users in Ubuntu, or skip the password in other ways? (I'm expecting real Linux users to suggest that passwordless users must not get any rights and there be an admin user with a strong password. Yes, you're right. But that's not what this question is about. Thanks.)

  Read the article

• Converting Inkscape layers directly to a slideshow presentation?

  - by darenw

  I'm creating a slideshow in Inkscape. There's one or more layer per slide, plus several background layers, and some special layers to be used on several slides in a row, etc. In the past, I'd create each slide as a .png image by turning on appropriate layers and exporting an image. This is tedious and easy to make mistakes. Is it possible to automate this? To enable the right layers and save all slides directly to a file format suitable for presenatations, such as .ppt, which I can give to anyone for display? The solution will have to work on Linux.

  Read the article

• Ubuntu 9.10 Only Sees 244 MB RAM, while BIOS and Windows Sees 1.5 GB

  - by nicorellius

  I have 1.5 GB of RAM installed on an older Dell, Pentium 4. I just installed Ubuntu 9.1 and the system is only seeing 244 MB of RAM, even though there is 1.5 GB on the system. The BIOS sees all of it. I ran a Knoppix disc and it only saw 25 MB upon booting. I made no particular changes to the installation taht would affect this. I looked through the BIOS and the only setting I could see was the AGP aperture. Not even sure what this is. Anyone know where I went wrong? I also tried moving the memory modules around on the board. Booted with the 1 GB stick, still saw 244 MB. NOTE - This same system, except for the hard drive, had Windows XP running on it. The user who ran it said that the RAM was good and always showed 1.5 GB. Here is sudo cat /proc/meminfo MemTotal: 250064 kB MemFree: 3832 kB Buffers: 13356 kB Cached: 52216 kB SwapCached: 19676 kB Active: 91504 kB Inactive: 113884 kB Active(anon): 60572 kB Inactive(anon): 82156 kB Active(file): 30932 kB Inactive(file): 31728 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 250064 kB LowFree: 3832 kB SwapTotal: 4883720 kB SwapFree: 4781204 kB Dirty: 496 kB Writeback: 720 kB AnonPages: 123796 kB Mapped: 23368 kB Slab: 17248 kB SReclaimable: 7932 kB SUnreclaim: 9316 kB PageTables: 5304 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 5008752 kB Committed_AS: 740372 kB VmallocTotal: 770600 kB VmallocUsed: 26008 kB VmallocChunk: 662544 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 114128 kB DirectMap4M: 147456 kB

  Read the article

• how to determine which of the installed chrome extensions are showing text-enhanced ads or are injecting new CSS class names?

  - by syedrakib

  I have three google users [personal, work, work] in my chrome on Mac OS X. The chrome for my personal account [not the other two chromes] has text-enhanced ads in every site i go to. It double-underlines some keywords on every page. On mouse hover I get an ad overlay from http[colon][slash][slash]intext.nav-links.com[slash] Upon right-clicking one of the text-enhanced keywords and going to 'inspect element', i see that the text has been wrapped around with a CSS classname called adtext. It even shows the .adtext CSS descriptions on the right. How do i determine from WHICH particular extension is this CSS classname being injected into my pages?

  Read the article

• IP tables gateway

  - by WojonsTech

  I am trying to make an iptables gateway. I ordered 3 dedicated server from my hosting company all with dual nics. One server has been given all the ip addresses and is connected directly to the internet and has its other nic connected to a switch where the other servers are all connected also. I want to setup iptables so for example the ip address 50.0.2.4 comes into my gateway server it fowards all the traffic to a private ip address using the second nic. This way the second nic can do what ever it needs and can respond back also. I also want it setup that if any of the other servers needs to download anything over the inernet it is able to do so and by using the same ip address that is used for its incomming traffic. Lastly I would like to be able to setup dns and other needed networking stuff that i maybe not thinking about.

  Read the article

• Why isn't Synergy working for me?

  - by Anthony

  It worked for about a week then stopped working. I'm trying to make it work between a Windows 7 laptop and a Windows XP laptop. My router is a Linksys E1000. I tried uninstalling and reinstalling the program multiple times. I've tried port forwarding. I've tried making exceptions in the firewall. I've tried disabling the firewalls. It might be relevant also that Input Director doesn't work either. What am I doing wrong?

  Read the article

• Should I use 802.11n with a 15 Mbps ISP (Comcast Cable)?

  - by stackoverflowuser2010

  I currently own a LinkSys-WRT54GL 802.11a/b/g wireless router, and my ISP is Comcast Cable providing me with 15 Mbps (that's bits per second, I believe) download speed. I am wondering if there is any benefit with using an 802.11n wireless router to access the Internet? The maximum theoretical speed of the WRT54GL router is 54 Mbps (802.11g), which is faster than the 15 Mbps provided by my ISP. I know that 802.11n has a max bandwidth of 300 Mbps, and it would help for intra-house transfers, such as streaming video from one computer to another. But is there any benefit to 802.11n for Internet activity, such as web browswing, gaming, and streaming video from Netflix?

  Read the article

• Purpose of Adobe PDF Link Helper

  - by user770750

  I have an idea of what this browser add-on does. Adobe PDF Browser Control (AcroPDF.dll) Apparently, if I disable this one, PDFs embedded in a page with the embed or object tag fail to function properly. So, its pretty clear as to its function. However, I can't find anywhere accurate documentation on what this add-on below does. Adobe PDF Link Helper (AcroIEHelperShim.dll) IE9 (with Reader X) seems to work flawlessly with it disabled. PDF's still open within the browser. Only if I uncheck Display PDF in Browser in Readers preferences does that cease. I played around on an XP VM with IE7 and Reader X... no isssues noticed when disabled. Does anyone know the purpose of this add-on? At one time I believed it was necissary for the 'within browser' functionality to work, though that was never verified. Something change?

  Read the article

• RTL8192SU Linux Issue Installing Driver

  - by s32ialx

  OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

  Read the article

• How can I change my display to 24 or 32 bit in ubuntu?

  - by officespace

  I have a Dell Inspiron 1501 and I'm trying to use f.lux with ubuntu, but when I start it I get Sorry, we only support 24/32-bit displays right now. How can I change my display to 24 or 32 bit? I'd appreciate any help.

  Read the article

• Inexpensive, simple screen recording application for mac

  - by donut

  I am more and more consistently running into the need to create screencasts (record my screen) for clients to show them how to use programs or websites. Up until now I've been using Jing and it's been wonderful. But I would like something that can give me something less annoying than a .swf. A .mov or, best of all, something that plays without fuss on Mac and Windows. Also, the 5-minute limit is annoying, but not show stopping. Basically, I'd like to be able to actually give them the file on a CD or something instead of relying on whatever host I use staying up for eternity. To sum up, here's what I require: Record a portion or all of the screen. Records audio from mic while recording screen. Exports files easily playable on Mac and Windows (requiring Quicktime is okay, but not ideal) Will work on Mac OS 10.5+ Allows recording videos of at least 5 minutes. Text in recorded videos is easily readable when exported. Bonuses points for: Records videos greater than 5 minutes Exported videos will work in Windows Media player without any fuss. I haven't upgraded to Snow Leopard yet but I know it has some screen recording stuff built in but I don't know if it would be sufficient or not. The reason I say, "simple" is because most of the applications I've seen do much more than I need (I mean, Jing is nearly perfect for my needs) and cost more than I would like to spend.

  Read the article

• Windows 7 Dell laptop Forgotten password

  - by jtmk

  Hi, A friend has managed to set up their new Windows 7 Home Premium Dell Inspiron and forgot the password they have used. I have tried the following password reset software to no avail: UBCD OHPCrack Offline NT Password & Registry Editor *Trinity Kon Boot I have also tried to do a system restore but this asks for the password. The user does not have any data they need to save. Is there anyway I can get access to the restore partition using Linux to create a recovery disk or do I have to purchase a recovery disk from Dell? Any help is greatly appreciated.

  Read the article

• chkdsk, SeaTools, and "does not have enough space to replace bad clusters"

  - by Zian Choy

  When I tried to do a Windows Vista Complete PC Backup, I received an error message that blathered about bad sectors. Then, when I ran chkdsk /r on the destination drive, this is what I got: C:\Windows\system32>chkdsk /R E: The type of the file system is NTFS. Volume label is Desktop Backup. CHKDSK is verifying files (stage 1 of 5)... 822016 file records processed. File verification completed. 1 large file records processed. 0 bad file records processed. 0 EA records processed. 0 reparse records processed. CHKDSK is verifying indexes (stage 2 of 5)... 848938 index entries processed. Index verification completed. 0 unindexed files processed. CHKDSK is verifying security descriptors (stage 3 of 5)... 822016 security descriptors processed. Security descriptor verification completed. 13461 data files processed. CHKDSK is verifying file data (stage 4 of 5)... The disk does not have enough space to replace bad clusters detected in file 239649 of name . The disk does not have enough space to replace bad clusters detected in file 239650 of name . The disk does not have enough space to replace bad clusters detected in file 239651 of name . An unspecified error occurred.f 822000 files processed) Yet, when I ran the SeaTools short & long generic tests on the Seagate disk, I didn't receive any errors. I know that I could reformat the disk and try running chkdsk /r again but I'd prefer to avoid waiting 4 hours in the hope that the problem was magically fixed. On the other hand, if I RmA the drive to Seagate, I have no SeaTools error number to use and they may claim that the drive is just fine. What should I try to do next? Side frustration: There is plenty of free hard drive space. The E: partition has 182 GB free.

  Read the article

• Mouse wheel scrolling in less and vim using urxvt

  - by Adam Batkin

  I have started working with rxvt-unicode (aka urxvt) but found an issue with mouse-wheel scrolling, as compared to gnome-terminal and konsole. The mouse wheel works fine for going through the scrollback buffer, but it doesn't work for automatic scrolling in less/most or vim (though in vim, setting mouse=a makes it work, but in a very different way, which I don't have to do with gnome-terminal/konsole). Is there a way to make urxvt behave like gnome-terminal and konsole when in less and vim where the mouse wheel Just Works?

  Read the article

• Partitioning External Hard Drive

  - by Srin

  Is there a way to partition a External Hard drive ? I have a WD 500GB external hard drive with USB interface

  Read the article

< Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >