Search Results

Search found 12200 results on 488 pages for 'lubuntu desktop'.

Page 184/488 | < Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >

• Router's ssid changes from infrastructure to ad-hoc

  - by waldo

  For a period of time the router's ssid is shown (on various computers) as a normal infrastructure network - computers connect fine and everything works however after a few minutes / hours all computers see the same ssid as an ad-hoc network (not infrastructure). At this point a computer that was already connected continues to work - a computer that isn't cannot connect. Rebooting the router temporarily restores the visibility of the correct infrastructure ssid. Is something interfering? Connecting computers: macbook (2009), iphone 3g, windows vista desktop, windows xp desktop. Details: - D-Link DSL-2740B router set to WPA2-PSK (Personal) - Enable Wireless : Yes - Wireless Network Name (SSID) : ###### - Country : Australia - Wireless Channel : 1 - 802.11 Mode : Mixed 802.11n, 802.11g and 802.11b - Channel Width : Auto 20/40 MHz - Transmission Rate : Best (automatic) - Hide Wireless Network : No - Group Key Update Interval : 0 (seconds)

  Read the article

• How to repair a broken .EXE file association

  - by Pointy

  After (hopefully) scrubbing viruses out of a Windows 7 installation (after deciding not to simply run over the laptop repeatedly with my car), I've got everything almost back to normal. The only lingering issue I have is that for my non-admin users, the ".exe" file extension doesn't work. That is, clicking on the various desktop application links results in a "How do you want to open this?" dialog. I've been through the alleged registry fixing from "winhelponline" and that had absolutely no effect. I've tried running "assoc" for the affected users, but it reports the .exe association to be "exefile" even though it persistently does not work. Right-clicking on a desktop icon and then choosing "start" does successfully open an application, but that's clearly a terrible situation. For my admin user, things seem to work fine. What do I need to do to get things working?

  Read the article

• What are some "must have" Ubuntu/Linux programs?

  - by wag2639

  Inspired by link text, what are some programs thats must have for a developer, general desktop user, etc?

  Read the article

• OpenLDAP User Home Directory

  - by Bo Zhou

  I'm trying to install OpenLDAP on CentOS 6.2 . I manually added the LDAP accounts on server, and I had been successful to login the server by the LDAP username/password, but I found that the Home on Desktop of GNOME still points to a local user's Home folder, at the same time, the LDAP user's Home folder was created under /home as expected. So my question is how should I map the Home folder of desktop to the path set on LDAP server ? Thanks ! And how should I use ldapadd command, it always tells me the SASL error, but I really do not know why. Thanks !

  Read the article

• I can't do a Remote Assistance session to a Windows XP box from Windows 7.

  - by superkinhluan

  My Mom's computer is running Windows XP, and my desktop running Windows 7. She's having some technical issue, so I want to do a Remote Assistance session to her machine. However, no matter what I've tried, the Remote Assistance program doesn't connect successfully. I've verified that the Windows Firewall (on both my and her machines) is configured properly to allow Remote Assistance program to go through. What's interesting is that I have the same problem when I try to do Remote Assistance from my desktop to my laptop, which is also running Windows XP. However, when I try to connect to my girlfriend's machine, which is runninng Windows 7 this time, the connection is successful. So in the end, I guess there must be some incompability between Windows 7 and Windows XP. Does anyone experience the same issue? How did you resolve it?

  Read the article

• I can't launch any Win8 apps after upgrading to Windows 8.1

  - by locka

  I just upgraded to 8.1 and now none of the Metro apps start. The issue is that if I start any metro app, including the Store and PC Settings they immediately fail. The classic desktop is fine, as are standard programs, it's just the metro apps. If I look in the system event log I see errors like this: *Activation of application winstore_cw5n1h2txyewy!Windows.Store failed with error: This application does not support the contract specified or is not installed. See the Microsoft-Windows-TWinUI/Operational log for additional information.* In addition the tiles in metro have a small cross icon on them: I suspect that my Live ID (which I somehow managed to skip during update) is not set properly and consequently none of the online stuff works. But how do I fix this? I can't start PC settings, I can't start store. I see no way in the classic desktop of setting these things. I don't want to have to reinstall for this. Is there a simple fix?

  Read the article

• cant send using postfix from external ip address

  - by daniel

  i have postfix set up as a satellite to listen on port 587 i can send email outside fine trough the postfix(ubuntu) box from the local network with no problems when i try to connect to the postfix(ubuntu) box from a external ip and send mail it spits back a 554 5.7.1 Relay access denied error i can telnet to it fine, just cant send mail this is my main.cf : smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = smtp_use_tls = no myhostname = cotiso-desktop alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = mydomainname.com, cotiso-desktop, localhost.localdomain, localhost relayhost = smtp.mydomainname.com mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all there is no security set up yet, i'm just trying to get it working first any ideas? thanks in advance

  Read the article

• How to quickly switch monitors on multi-monitor setup?

  - by Saxtus

  At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer?

  Read the article

• Create Virtual Image of Laptop before Formatting

  - by Simon Mark Smith

  I have a 3 year old laptop running Windows XP that I used for business. Although I have not used the laptop in over a year, I now want to re-commission it with Windows 7 and a fresh install. Before I do the fresh install I want to create a Virtual Image of the laptop that I can keep and potentially run on my desktop machine should I ever need to access any of the old files/projects that it contains currently. I know that most people will say just copy the files over to your desktop, but my concern is the configuration of the laptop. I used to use it for development and it has older versions of Visual Studio, SQL Server, Active X controls etc, etc than I currently use so I really want to preserve the environment not just the files. So really I am asking what is the best tool-set/method to achieve this? I understand there are free VM tools available but I have never done this before and would appreciate any help.

  Read the article

• How to crop black bars or zoom on Youtube and other Video websites?

  - by cloneman

  Many desktop software (VLC, MPC) and have an option to 'zoom in' , 'crop black bars', or crop to a specific aspect ratio. How can we do this in Fullscreen on Youtube or other flash Video sites? I am the viewer, NOT the video's creator/publisher. iOS Can do this (double tap to zoom, which removes black bars, zoom depth not configurable). afaik, Desktop computers (and android devices), cannot do this on the fly. The only 'workaround' I've found is F11 and zooming of the entire web page - basically a fake full screen and zooming the web page beyond the screen size. Use Case: watching 4:3 flash videos from the web on a widescreen monitor. Looking for all creative solutions, including any software that accesses YouTube without using a web browser.

  Read the article

• How do I create a Launcher in Ubuntu 9.10 that runs a shell script?

  - by mkelley33

  Here's my situation: New to Ubuntu (just installed 9.10 Karmic Koala 64 bit) Purpose: to easily run PyCharm without too much typing (ie. cd... ./pycharm.sh) Want to create desktop Launcher instead of terminal & typing (without resorting to the "Run in Terminal" option) Tried to create Launcher to executes .sh script in Document directory Right-clicked Desktop Create Launcher a. Type == Application; Browse [insert absolute path to .sh script]; no luck b. Type == Application in Terminal; Browse ...ditto I'm open to any other alternatives that involve as little typing as possible. I would like to just start Ubuntu, click Launcher icons, and have terminals spring to life, running the intended scripts. Crazy? No. Lazy? Probably. Productive? Hopefully :)

  Read the article

• Fusion 3.1 and Parallels 6 for Win7 x64

  - by Ronnie

  I read in a recent article that Parallels Desktop 6 is faster almost everywhere than VMware Fusion. I was originally using Parallels 4 before passing to VMware due to the frequent Parallels crashes. As now I am using a lot Fusion on my Macbook on a big Win7 x64 virtualized development machine that I find too slow I am wondering if the announced speed up of Parallels V6 is justified to come back to it. As a test I converted my Fusion 3.1 to a trial of Parallels Desktop 6 and my Windows Experience Index passed from 4.7 of Fusion to 4.5 on Parallels 6 so apparently the virtualized machine is not seeing that speed benefit. Is there any optimization to set up on Parallels to increase the WEI or should I stay with Fusion (and in this case this kind of articles is just marketing stuff)?

  Read the article

• How to supply parameters in URI schema?

  - by abhishekgarg

  I just started working with URI schema and successfully created one in Windows and Linux as well, but I am not able to parse any parameters to it. In Linux I am trying to open a file "test.py" in gedit, so for schema part I used these commands: gconftool -2 -t string /desktop/gnome/url-handlers/geditapp/command "gedit %s" gconftool -2 -t bool/desktop/gnome/url-handlers/geditapp/enabled true This is creating the URI protocol and I'm able to open the application with the Web-browser, but its not taking the parameters for the file I want to open, so I'm using the following command: <a href="geditapp:/opt/test/myfile.py">open</a> Which opens the gedit but without the file. Can someone please help me with this?

  Read the article

• Wired and wireless conections: force Windows to connect to laptop through Ethernet?

  - by danielkza

  I have a desktop connected to the internet and to my home network through Wi-Fi, and a latptop connected to said desktop through an Ethernet cable. But Windows seems to only reach the laptop through Wi-Fi: I want to transfer files through the wired connection instead. Setting up Internet Connectin Sharing and disconnecting the laptop from Wi-Fi altogether doesn't seem like the most elegant solution to me. I also thought about going to the hosts file and setting up the IP address manually, but that would make the laptop completely unavailable if it's not wired, which happens quite often unfortunately. Is there any way for me to tell Windows to use the wired connection for a particular host if possible, and fallback to any other route it finds otherwise?

  Read the article

• How to use a custom Windows 7 system drive letter?

  - by Ivan

  The subject PC has many hard drive partitions dedicated for different purposes, C: being a Windows XP system drive and F: (which is actually the next primary partition placed right after C: physically) being intended to host a newly installed Windows 7 instance (meant for "dual boot" configuration). Needless to say the intention was all the partitions to have exactly the same letters under both OSes, needless to say Windows 7 has detected all of them in a completely different order which would not be a problem (as the non-system drives letters can be changed easily after installation) if it wouldn't have named it's system drive C: (meant to be F:), which I have no Idea how to change. Is there a way to set the letter you want? I don't mind reinstalling Windows 7 from scratch if it is to be set at installation time or even configured in some text files on the installation DVD. I have tried this way, but it renders the Windows 7 system desktop unbootable (gets stuck on "Preparing your desktop..." after "Welcome").

  Read the article

• Xenserver boot error

  - by Adrian

  I'm trying to get Xenserver 5.5 running on a spare computer here, hardware specs: Intel Q6600, 4GB Ram, and Gigabyte GA-P35-DS3R motherboard Xenserver itself installs fine onto a 150GB sata hdd, however it fails to boot whatsoever, giving this garbled mess: http://img697.imageshack.us/img697/9918/biosi.jpg it's not frozen because if I press enter it just prints a different garble and it also says "could not find kernel image". The strangest thing is if I put that hdd in my desktop and assign it to a VMWare desktop vm (under the ESX profile no less) it boots perfectly... leading me to believe there are no problems with the install or the hdd itself. From what I can tell the error seems to be occuring completely seperately to Xenserver, in the bootloader extlinux?. If there was a motherboard compatibility issue I would think it would also have manifested during installation, and the fact the problem seems to be with the booting into Xen makes me doubt this. Any ideas guys? (I'm using Xen because it can do PCI passthrough without VT-d.)

  Read the article

• Open Windows Server 2012/Windows 8 Start Menu

  - by bmccleary

  I realize that Windows Server 2012 (and Windows 8) removed the start menu button and replaced it with moving your mouse to the upper right corner of the screen. This works fine when the desktop is full screen. However, I access all my servers through windowed RDP connections (or through the Hyper-V console window) and in this case, the desktop is not full screen. Therefore, in order to open the new "start" menu, I have to slowly move my mouse very carefully within the window to just a few pixels within top right corner of the window in order to open the menu. Also, because the session is windowed, the default hot keys (Windows + D, etc.) won't work. There has got to be an easier way. Has anyone else experienced this frustration?

  Read the article

• Pin same app multiple times in Windows 7

  - by Mr. Shiny and New

  I use some programs with command line arguments and like to have shortcuts for launching those programs with those arguments. For example, I keep several Firefox profiles around and like to specify the profile name on the command line. Similarly I have several Eclipse shortcuts with a command line argument specifying the workspace to open. I would like to be able to pin these shortcuts to the start menu or taskbar in Windows 7. The problem I have is that once I've pinned one of these, no other shortcuts which launch the same exe can be launched. I'm also open to suggestions such as a suitable desktop gadget which can contain a bunch of arbitrary shortcuts, yet remain in a fixed position on my desktop somewhere, or some way of adding a secondary taskbar (this was possible in XP).

  Read the article

• What is IPKVM and why would I need that to install SQL Server on my Web Server?

  - by Eric

  Hello. I have a dedicated server, and will be installing SQL Server. However, my hosting company said they can connect an external CD ROM drive and give me KVM over IP to install SQL Server. My question is, what is IPKVM, and how does it work? Do I need special hardware or software on my side to use it....or do I just connect via remote desktop? Also, why can't I remote into my server through remote desktop instead of using KVM over IP?

  Read the article

• Ubuntu Lucid: Erratic screen behaviour after boot

  - by fgysin

  In short: about 50% of the time I have a screwed up monitor setup after reboot. About 50% it is totally correct. Now the longer version: I updated my machine from 9.04 to 10.04 (via 9.10). At first I run into some monitor problems (I have a 3-monitor setup) because of the known bug in the new xserver driver for xinerama. This messes up behaviour if the mouse goes either left or above the screen number 0, i.e. I had to make my left-most monitor screen 0. Everything worked out fine finally, I got my 3-monitor setup back with xinerama enabled to get one big desktop streched over 3 screens. Now the fun part: Every time I start up my machine only one of the 3 monitors gets a signal and is woken up: it only recognizes the left-most monitor (screen 0) and crams all the desktop stuff into this one screen. If I go into nvidia settings I only see one physical device although all 3 are connected and have power. When I look into the xorg.conf I can still see my old setup with 3 devices, 3 screens, xinerama active etc... But I was totally unable to get 3 montitors to work. (I tried unplugging monitors, reconfiguring whole nvidia setup, ...) But it gets even better: When I restart my machine (i.e. choose the restart option from the Ubuntu menu) it shuts down and tries to restart. The restart then gets stuck after showing the Ubuntu splash screen with the 'loading bar' (the moving dots thingy) and I am forced to kill the machine by cutting power. But after the power cut the machine boots up normally and suddenly I get my 3 monitor setup back up working. That is until the next time I shut down and start up, where it all starts over again and I only have one monitor... (see above) I really have a hard time seeing where the error is. It must be that the restart boot somehow differs from the 'normal' boot. But the fact that it gets stuck and I need to cut power which then basically triggers a 'normal' boot does not really support this theory... My setup (please tell me if you need further info): 3 monitors as 3 screens as one desktop (with xinerama) 2 nvidia cards where screen 0 and 1 are on card 0 and screen 2 is on card 1 Ubuntu 10.04 Lucid Lynx (updated from 9.10, 9.04, ....) I would appreciate every idea on the subject, at the moment I really don't have any clue what to do...

  Read the article

• Folder Redirection won't load on Windows 7 Machine in Windows 2008 R2 Network

  - by leeand00

  Okay so redirected profiles don't load exactly, but the computer is joined to the network and it won't display any of the users files on their desktop that are in their redirected profile. I know this because we have a Terminal Server and when the user logs in there, her files appear. I checked the users' profile in Active Directory Users and Computers and compared it with a working users profile. When that didn't turn up any differences, I looked at her computer and found that on the Dial-in tab the Network Access Permission wasn't set to Control access through NPS Network Policy like it was on the other machines on the network; so I selected it, ran gpupdate /force on her machine and rebooted. This did not fix the issue. Is there anything else that could be preventing the redirected files on the users desktop from showing up when the user logs in?

  Read the article

• WS2008R2 / W7PRO: Cannot rename folder - folder redirection

  - by castor

  After few months from migrating one of my networks on Active Directory this issue started. A few users are encountering an issue from time to time - they cannot rename folders and files on desktop. The system throws an error saying the folder or file is already in use. Folder redirection takes place in this scenario (Desktop and My Documents) Subnet with user PCs is different from subnet with servers (Cisco ASA5505 Security Plus between - all inspection policies disabled on these interfaces) Users are running Windows 7 Professional x86 Server is running Windows Server 2008 R2 Standard Any ideas?

  Read the article

• Public DNS Server fails on Windows Amazon EC2

  - by Adroidist

  I have started a new Windows server instance on Amazon EC2. The security group has the following rules: Ports Protocol Source 22 tcp 0.0.0.0/0 80 tcp 0.0.0.0/0 443 tcp 0.0.0.0/0 3389 tcp 0.0.0.0/0 53 udp 0.0.0.0/0 -1 icmp 0.0.0.0/0 I am able to ping the public DNS server of the machine and i can connect to it using Windows Remote Desktop connection. However, when i put in my web browser the public DNS server, it fails to connect. Morever, I used filezilla and putty (and in both I loaded the private key .pem) but i receive connection timed out. I disabled the firewall on both my pc and the instance (which I entered using Remote desktop connection). Can you please tell me what I am missing?

  Read the article

• Output to TV only works if monitor is plugged in

  - by Greg Sansom

  I am trying to use my TV as the sole output for a computer. The computer has a graphics card with 2 outputs - one RGB and one DVI. I have the RGB output going to the TV, and when the DVI output is connected to a monitor, display works fine on both the monitor and the TV. If I turn off the monitor, or even turn off power to the monitor, the TV continues to display the desktop. If I unplug the DVI cable from the monitor (remember that the monitor doesn't have any power at this point), the TV stops presenting the desktop and displays a "Not Accepted" message. When starting up the computer, the TV displays fine, but stops working at the "press ctrl-alt-delete" screen unless the monitor is connected. How can I make the TV show the display without the monitor? The TV is an LG RT-42PZ45V. The graphics card is an ATI Radeon series HD4350 512MB GDDR2. The computer is running Windows Server 2008 r2.

  Read the article

• How to quickly switch monitors on multi-monitor setup? (W7)

  - by Saxtus

  At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer? Thanks in advance.

  Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >