Search Results

Search found 31621 results on 1265 pages for '13 10'.

Page 185/1265 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

  • Multiple vlan issue with procurve switch

    - by Chris-AZ
    I have a cisco asa5505 as my rtr/fw(10.1.3.254). I have vlan 1 and vlan 3. Vlan 1 is my default all access vlan. Vlan 3 is my Guest(dmz) vlan. I can't seem to get a dhcp ip address when my laptop is plugged into port 42 on my procurve. I have plugged my laptop directly into the firewall and it gets a dhcp ip fine(the firewall is dhcp server). the firewall is plugged into port 41. Only vlan3 needs to go over port 41. I'm sure I have a bonehead config problem however I'm about ready to pull out what little hair I have left. vlan 1 name "Computers" forbid 45 untagged 1-41,43-44 ip helper-address 10.1.1.16 ip address 10.1.1.1 255.255.255.0 tagged 46-48 no untagged 42,45 exit vlan 3 name "Guest Wireless" ip helper-address 10.1.3.254 ip address 10.1.3.1 255.255.255.0 tagged 41-42,44-48 exit

    Read the article

  • Type Casting variables in PHP: Is there a practical example?

    - by Stephen
    PHP, as most of us know, has weak typing. For those who don't, PHP.net says: PHP does not require (or support) explicit type definition in variable declaration; a variable's type is determined by the context in which the variable is used. Love it or hate it, PHP re-casts variables on-the-fly. So, the following code is valid: $var = "10"; $value = 10 + $var; var_dump($value); // int(20) PHP also alows you to explicitly cast a variable, like so: $var = "10"; $value = 10 + $var; $value = (string)$value; var_dump($value); // string(2) "20" That's all cool... but, for the life of me, I cannot conceive of a practical reason for doing this. I don't have a problem with strong typing in languages that support it, like Java. That's fine, and I completely understand it. Also, I'm aware of—and fully understand the usefulness of—type hinting in function parameters. The problem I have with type casting is explained by the above quote. If PHP can swap types at-will, it can do so even after you force cast a type; and it can do so on-the-fly when you need a certain type in an operation. That makes the following valid: $var = "10"; $value = (int)$var; $value = $value . ' TaDa!'; var_dump($value); // string(8) "10 TaDa!" So what's the point? Can anyone show me a practical application or example of type casting—one that would fail if type casting were not involved? I ask this here instead of SO because I figure practicality is too subjective. Edit in response to Chris' comment Take this theoretical example of a world where user-defined type casting makes sense in PHP: You force cast variable $foo as int -- (int)$foo. You attempt to store a string value in the variable $foo. PHP throws an exception!! <--- That would make sense. Suddenly the reason for user defined type casting exists! The fact that PHP will switch things around as needed makes the point of user defined type casting vague. For example, the following two code samples are equivalent: // example 1 $foo = 0; $foo = (string)$foo; $foo = '# of Reasons for the programmer to type cast $foo as a string: ' . $foo; // example 2 $foo = 0; $foo = (int)$foo; $foo = '# of Reasons for the programmer to type cast $foo as a string: ' . $foo;

    Read the article

  • iSCSI connection timing out on ESX 3.5 against a NetApp storage appliance

    - by Jesse1973
    I get a timeout on iSCSI on different ESX hosts (3.5) at different times. It is puzzling, as both the ESX hosts as windows and other guests are experiencing timeouts. The iSCSI network is segregated on a private network. Here is an export of vmkiscsid.log from last night: 2010-02-10-12:30:38: iscsid: an InitiatorAlias= is required, but was not found in /etc/vmware/vmkiscsid/initiatorname.iscsi 2010-02-10-12:30:38: iscsid: LogLevel = 0 2010-02-10-12:30:38: iscsid: LogSync = 0 2010-02-10-12:30:42: iscsid: Login Success: iqn.1992-08.com.netapp:sn.101197719,default,192.168.73.2,3260,2001, 0x1 2010-02-10-12:30:42: iscsid: connection1:0 is operational now 2010-02-16-02:03:35: iscsid: Kernel reported iSCSI connection 1:0 error (1008) state (3) 2010-02-16-02:03:39: iscsid: connection1:0 is operational after recovery (2 attempts) 2010-02-16-04:02:27: iscsid: Kernel reported iSCSI connection 1:0 error (1008) state (3) 2010-02-16-04:02:32: iscsid: connection1:0 is operational after recovery (2 attempts) Should i edit the timeout value on the ESX host for iSCSI? This may work around the problem but will not solve it.

    Read the article

  • OpenGL ES 2.0: Filtering Polygons within VBO

    - by Bunkai.Satori
    Say, I send 10 polygon pairs (one polygon pair == one 2d sprite == one rectangle == two triangles) into OpenGL ES 2.0 VBO. The 10 polygon pairs represent one animated 2D object consisting of 10 frames. The 10 frames, of course, can not be rendered all at the same time, but will be rendered in particular order to make up smooth animation. Would you have an advice, how to pick up proper polygon pair for rendering (4 vertices) inside Vertex Shader from the VBO? Creating separate VBO for each frame would end up with thousands of VBOs, which is not the right way of doing it. I use OpenGL ES 2.0, and VBOs for both Vertices and Indices.

    Read the article

  • The final Cumulative Update for SQL Server 2008 SP3

    - by AaronBertrand
    Microsoft has released the final Cumulative Update (#17) for SQL Server 2008 Service Pack 3. Build # 10.00.5861 KB Article: KB #2958696 9 public fixes Relevant for builds 10.00.5500 -> 10.00.5860 NOT for SQL Server 2008 R2 (10.50.xxxx) Once more, this is the last cumulative update for SQL Server 2008. Both 2008 and 2008 R2 exit mainstream support in July of this year. That's two months away. If you want a final service pack for either or both of these major versions, and want your voice heard,...(read more)

    Read the article

  • Using DNS in iproute2

    - by Oliver
    In my setup I can redirect the default gateway based on the source address. Let's say a user is connected through tun0 (10.2.0.0/16) is redirect to another vpn. That works fine! ip rule add from 10.2.0.10 lookup vpn1 In a second rule I redirect the default gateway to another gateway if the user access a certain ip adress: ip rule add from 10.2.0.10 to 94.142.154.71 lookup vpn2 If I access the page on 94.142.154.71 (myip.is) the user is correctly routed and I can see the ip of the second vpn. On any other pages the ip address of vpn1 is shown. But how do I tell iproute2 that all request at e. g. google.com should be redirected through vpn2?

    Read the article

  • Keeping up with SQL Server cumulative updates

    - by AaronBertrand
    Yesterday, a conversation on twitter reminded me that I haven't been keeping up with posting cumulative updates. I missed these updates for SQL Server 2008 on March 15: Cumulative Update #7 for SQL Server 2008 SP1 (10.00.2766) Cumulative Update #10 for SQL Server 2008 RTM (10.00.1835) And yesterday Glenn Berry ( blog | twitter ) was the first I know of to blog about Cumulative Update #9 for SQL Server 2005 SP3 (9.00.4294). He also shares some interesting information about changes to the support policy...(read more)

    Read the article

  • DHCP reply packets do not make it into KVM instance in OpenStack

    - by Lorin Hochstein
    I'm running a KVM instance inside of OpenStack, and it isn't getting an IP address from the DHCP server. Using tcpdump, I can see the request and reply packets on vnet0 of the compute host: # tcpdump -i vnet0 -n port 67 or port 68 tcpdump: WARNING: vnet0: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on vnet0, link-type EN10MB (Ethernet), capture size 65535 bytes 19:44:56.176727 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:46:f6:11, length 300 19:44:56.176785 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:46:f6:11, length 300 19:44:56.177315 IP 10.40.0.1.67 > 10.40.0.3.68: BOOTP/DHCP, Reply, length 319 19:45:02.179834 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:46:f6:11, length 300 19:45:02.179904 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:46:f6:11, length 300 19:45:02.180375 IP 10.40.0.1.67 > 10.40.0.3.68: BOOTP/DHCP, Reply, length 319 However, if I do the same thing on eth0 inside the KVM instance, I only see the request packets, not the reply packets. What would prevent the packets from making it from vnet0 of the host to eth0 of the guest? My host is running Ubuntu 12.04 and my guest is running CentOS 6.3. Note that I have added this rule in my iptables, but it doesn't resolve the issue: -A POSTROUTING -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill The instance corresponds to vnet0 and is connected via br100: # brctl show bridge name bridge id STP enabled interfaces br100 8000.54781a8605f2 no eth1 vnet0 vnet1 virbr0 8000.000000000000 yes Here's the full iptables-save: # Generated by iptables-save v1.4.12 on Tue Apr 2 19:47:27 2013 *nat :PREROUTING ACCEPT [8323:2553683] :INPUT ACCEPT [7993:2494942] :OUTPUT ACCEPT [6158:461050] :POSTROUTING ACCEPT [6455:511595] :nova-compute-OUTPUT - [0:0] :nova-compute-POSTROUTING - [0:0] :nova-compute-PREROUTING - [0:0] :nova-compute-float-snat - [0:0] :nova-compute-snat - [0:0] :nova-postrouting-bottom - [0:0] -A PREROUTING -j nova-compute-PREROUTING -A OUTPUT -j nova-compute-OUTPUT -A POSTROUTING -j nova-compute-POSTROUTING -A POSTROUTING -j nova-postrouting-bottom -A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -j MASQUERADE -A nova-compute-snat -j nova-compute-float-snat -A nova-postrouting-bottom -j nova-compute-snat COMMIT # Completed on Tue Apr 2 19:47:27 2013 # Generated by iptables-save v1.4.12 on Tue Apr 2 19:47:27 2013 *mangle :PREROUTING ACCEPT [7969:5385812] :INPUT ACCEPT [7905:5363718] :FORWARD ACCEPT [158:48190] :OUTPUT ACCEPT [6877:8647975] :POSTROUTING ACCEPT [7035:8696165] -A POSTROUTING -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A POSTROUTING -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill COMMIT # Completed on Tue Apr 2 19:47:27 2013 # Generated by iptables-save v1.4.12 on Tue Apr 2 19:47:27 2013 *filter :INPUT ACCEPT [2196774:15856921923] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [2447201:1170227646] :nova-compute-FORWARD - [0:0] :nova-compute-INPUT - [0:0] :nova-compute-OUTPUT - [0:0] :nova-compute-inst-19 - [0:0] :nova-compute-inst-20 - [0:0] :nova-compute-local - [0:0] :nova-compute-provider - [0:0] :nova-compute-sg-fallback - [0:0] :nova-filter-top - [0:0] -A INPUT -j nova-compute-INPUT -A INPUT -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A INPUT -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A INPUT -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A INPUT -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A FORWARD -j nova-filter-top -A FORWARD -j nova-compute-FORWARD -A FORWARD -d 192.168.122.0/24 -o virbr0 -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 192.168.122.0/24 -i virbr0 -j ACCEPT -A FORWARD -i virbr0 -o virbr0 -j ACCEPT -A FORWARD -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -j nova-filter-top -A OUTPUT -j nova-compute-OUTPUT -A nova-compute-FORWARD -i br100 -j ACCEPT -A nova-compute-FORWARD -o br100 -j ACCEPT -A nova-compute-inst-19 -m state --state INVALID -j DROP -A nova-compute-inst-19 -m state --state RELATED,ESTABLISHED -j ACCEPT -A nova-compute-inst-19 -j nova-compute-provider -A nova-compute-inst-19 -s 10.40.0.1/32 -p udp -m udp --sport 67 --dport 68 -j ACCEPT -A nova-compute-inst-19 -s 10.40.0.0/16 -j ACCEPT -A nova-compute-inst-19 -p tcp -m tcp --dport 22 -j ACCEPT -A nova-compute-inst-19 -p icmp -j ACCEPT -A nova-compute-inst-19 -j nova-compute-sg-fallback -A nova-compute-inst-20 -m state --state INVALID -j DROP -A nova-compute-inst-20 -m state --state RELATED,ESTABLISHED -j ACCEPT -A nova-compute-inst-20 -j nova-compute-provider -A nova-compute-inst-20 -s 10.40.0.1/32 -p udp -m udp --sport 67 --dport 68 -j ACCEPT -A nova-compute-inst-20 -s 10.40.0.0/16 -j ACCEPT -A nova-compute-inst-20 -p tcp -m tcp --dport 22 -j ACCEPT -A nova-compute-inst-20 -p icmp -j ACCEPT -A nova-compute-inst-20 -j nova-compute-sg-fallback -A nova-compute-local -d 10.40.0.3/32 -j nova-compute-inst-19 -A nova-compute-local -d 10.40.0.4/32 -j nova-compute-inst-20 -A nova-compute-sg-fallback -j DROP -A nova-filter-top -j nova-compute-local COMMIT # Completed on Tue Apr 2 19:47:27 2013

    Read the article

  • #PowerPivot Workshop Online for America’s Time Zones #ppws

    - by Marco Russo (SQLBI)
    After so many request we have finally arranged a PowerPivot Workshop online edition dedicated to America’s time zones! It is scheduled for December 19-20, 2012, with this schedule: US Eastern Time (EST): 10:00am-1:00pm / 2:00pm-5:00pm US Central Time (CST): 9:00am-12:00pm / 1:00pm-4:00pm US Pacific Time (PST): 7:00am-10:00am / 11:00am-1:00pm Bogotá (Colombia): 10:00am-1:00pm / 2:00pm-5:00pm São Paulo (Brazil): 1:00pm-4:00pm / 5:00pm-8:00pm Buenos Aires (Argentina): 12:00pm-3:00pm / 4:00pm-7:00pm...(read more)

    Read the article

  • Cumulative Update 8 for SQL Server 2008 R2 is available

    - by AaronBertrand
    Today the SQL Server Release Services team has published Cumulative Update #8 for SQL Server 2008 R2. http://support.microsoft.com/kb/2534352 The build number is 10.50.1797, there are 14 fixes showing on the KB article, and this update includes the security update from last week's Patch Tuesday . Important No, this patch is not for SQL Server 2008, and no, it is not applicable if you've already installed the CTP of Service Pack 1 for SQL Server 2008 R2 (10.50.2418 or 10.50.2425). Please check @@VERSION...(read more)

    Read the article

  • CodePlex Daily Summary for Sunday, April 25, 2010

    CodePlex Daily Summary for Sunday, April 25, 2010New Projects281slides: 281slides is a project to demonstrate how one could go about implementing something similar to http://280slides.com in Silverlight3.Alex.XP's ARMA2 Chinese Language Pack Tools: Alex.XP's ARMA2 Chinese Language ToolsAuto Version Web Assets: The AVWA project is an HTTP Module written in C# that is designed to allow for versioning of various web assets such as .CSS and .JS files. This a...CAECE Twitter Clon: Proyecto para hacer un clon de twitter alumnos CAECE 2010DNSExchanger: Provides users to switch their PC's DNSs with pre-defined DNS with one click. Fluent ViewModel Configuration for WPF (MVVM): Fluent MVVM Configuration for WPF. A powerful yet simple interface for configuring view models for WPF. Eliminates INotifyPropertyChanged duplic...Genetic Algorithm N-Queens Solver: Genetic Algorithm N-Queens Solver with Multithreaded GUI.Hangmanondotnet: Just a starterHelium Frog Animator: Here is the Source code for the Helium Frog Animator. It is released under the GNU General Public Licence. The software enables stop motion animati...LISCH Collision Resolution, AVL Trees: LISCH Collision Resolution, AVL Trees Last Insertion Standart Colesced HashingNetPE: NetPE is a Portable Executable(PE) editor with full Metadata support. It is developed in pure C#.Proyecto Nilo: nada por ahoraSQL Schema Source Control: Track database schema changes automatically C# application that you can run against your SQL Databases (supports SQL 2008 right now, but you cou...uTorrent-Net-Client: A network client for uTorrent over the uTorrent-WebAPI. The Client use the API implementation from "uTorrent Web Client API Wrapper Library" (http:...Visual Leak Detector for Visual C++ 2008/2010: Enhanced Memory Leak Detection for Visual C++Visual Studio 2010 AutoScroller Extension: This is an extension to provide auto-scrolling to the Visual Studio 2010 environment. Simply middle click and drag the mouse in the direction yo...Vje: Vje projectVs2010-TipSite - Enter Island: This project is a visual studio 2010 project created in Silverligt. The project used to give using tips about visual studio 2010 by movies clips an...WKURM: Research Methods project @ western kentucky universityYupsky: yupsky webNew Releases.NET DiscUtils: Version 0.8: This is the 0.8 release of DiscUtils. New in this release are: An NFS client, supporting access to virtual disks held on an NFS server. A PowerS...Bluetooth Radar: Version 2.2: Add Settings window Get installed services on the deveice Check if Object Exchange is installed and changed properties. Add Windows Bluetooth...CSharp Intellisense: V1.7: major improvements: - Select best suggestion - on going changes filters (the filters will changed according to the current typing) - remember last ...DNSExchanger: DNSExchanger Beta v0.1: First release of the project, DNSExchanger. It requires, 32-bit Operating System (XP, Vista, 7) and need to be runned with administration credent...DotNetNuke® Form and List (formerly User Defined Table): 05.01.03: Form and List 05.01.03What's New: This release, Form and List 05.01.03, will be a stabilization release. It requires at least DotNetNuke 5.1.3 for...Enki Char 2 BIN: Enki Char 2 Bin: This program converts Characters to Binary and vice versaFluent ViewModel Configuration for WPF (MVVM): FluentViewModel Alpha1: This is a debug build of the FluentViewModel library. This has been provided to get feed back on the API and to look for bugs. For an example on h...Hangmanondotnet: Hangman: Just a previewHelium Frog Animator: Helium Frog 2.06 Documentation: Complete User Guide documentation in html formatHelium Frog Animator: Helium Frog 2.06 Source Code: Zip file contains all Visual Basic 6 source code, Artwork, sound files etc.Helium Frog Animator: Helium Frog Version 2.06: This file is the released version on Helium Frog 2.06. It contains binary files and required runtime libraries.Helium Frog Animator: Motion Jpeg Handling 10: Source code , module and debugging application in C# a) Module concatenates .jpg files to motion jpeg .avi file. b) Module retrieves any required ...Helium Frog Animator: Sample Grabber 03: Source code and debug program in C# a) Module lists all the available DirextX source devices b) Sets up video streaming to a picturebox by creating...Henge3D Physics Library for XNA: Henge3D Source (2010-04): The biggest change in this release was the addition of the OnCollision and OnSeparation "events" in the RigidBody class. An attached handler will r...HouseFly controls: HouseFly controls alpha 0.9.4.1: HouseFly controls release 0.9.4.1 alphaHTML Ruby: 6.22.0: Added new options for adjusting ruby line height and text line height Live preview for options Adjusted applied styles Added option to report...HTML Ruby: 6.22.1: space by word if ASCII character improved handling of unclosed ruby tagMultiwfn: Multiwfn1.3_binary: Multiwfn1.3_binaryMultiwfn: multiwfn1.3_source: multiwfn1.3_sourceRapid Dictionary: Rapid Dictionary Alpha 1.0: Try auto updatable version: http://install.rapiddict.com/index.html Rapid Dictionary Alpha 1.0 includes such functionality:you can run translation...Silverlight Input Keyboard: Version 1.5 for Silverlight 4: Dependency System.Windows.Interactivity.dll from Blend 4 RC http://www.microsoft.com/downloads/details.aspx?FamilyID=88484825-1b3c-4e8c-8b14-b05d02...SQL Schema Source Control: 1.0: Initial ReleaseUDC indexes parser: UDC indexex parser Beta: LALR(1): 1) Невозможно использовать знак распространения на общие и специальные определители, за исключением определителей в скобках (), (0), (=), ...uTorrent-Net-Client: uTorrent-Net-Client: This download contains the uTorrentNetClient and the 7Zip Windows-Service. Before you can use both, you must configuration some points in the App.C...VidCoder: 0.3.0: Changes: Added customizable columns on the Queue. Right click->Customize columns, then drag and drop to choose and reorder. Column sizes will also...Visual Leak Detector for Visual C++ 2008/2010: v2.0: New version of VLD. This adds support for x64 applications and VS 2010.Visual Studio 2010 AutoScroller Extension: AutoScroller v0.1: Initial release of Visual studio 2010 auto-scroller extension. Simply middle click and drag the mouse in the direction you wish to scroll, further...Yasbg: It's Static GUI: Many changes have been made from the previous release. Read the README! This release adds a GUI and RSS support. From now on, this program is only...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitSilverlight ToolkitMicrosoft SQL Server Product Samples: Databasepatterns & practices – Enterprise LibraryWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesPHPExcelMost Active Projectspatterns & practices – Enterprise LibraryRawrGMap.NET - Great Maps for Windows Forms & PresentationBlogEngine.NETParticle Plot PivotNB_Store - Free DotNetNuke Ecommerce Catalog ModuleDotNetZip LibraryN2 CMSFarseer Physics Enginepatterns & practices: Composite WPF and Silverlight

    Read the article

  • Delay of mail delivery - Hosted exchange provider

    - by alex
    Hi, I recently signed up to a new hosted email provider. When I send mail (from OWA, OR Outlook) there is a delay of up to 3 minutes from when i send the message, to when it's received (in my gmail account for example) I've listed the headers below. Is there anything I can advise my new email host to do? My previous email host delivers within 5 seconds!! New email provider: Delivered-To: ****.*****@******.co.uk.test-google-a.com Received: by 10.223.120.148 with SMTP id d20cs333125far; Mon, 30 Nov 2009 08:49:43 -0800 (PST) Received: by 10.213.106.202 with SMTP id y10mr4864870ebo.35.1259599782838; Mon, 30 Nov 2009 08:49:42 -0800 (PST) Return-Path: Received: from relay005.apm-internet.net (relay005.apm-internet.net [85.119.248.8]) by mx.google.com with SMTP id 26si13016480ewy.43.2009.11.30.08.49.42; Mon, 30 Nov 2009 08:49:42 -0800 (PST) Received-SPF: neutral (google.com: 85.119.248.8 is neither permitted nor denied by best guess record for domain of ****@*******.com) client-ip=85.119.248.8; Authentication-Results: mx.google.com; spf=neutral (google.com: 85.119.248.8 is neither permitted nor denied by best guess record for domain of ****@*******.com) smtp.mail=****@*******.com Received: (qmail 63915 invoked from network); 30 Nov 2009 16:49:41 -0000 Received: from unknown (HELO mx-out-manc2.simplymailsolutions.com) (88.151.129.22) by relay005.apm-internet.net with SMTP; 30 Nov 2009 16:49:42 -0000 X-APM-IP: 88.151.129.22 X-APM-Score: 4 Received-SPF: none (relay005.apm-internet.net: domain at alexjamesbrown.com does not designate permitted sender hosts) Received: from [10.1.20.1] (helo=win-s-manc1.shared.ifeltd.com) by mx-out-manc2.simplymailsolutions.com with esmtp (Exim 4.63) (envelope-from ) id 1NF9QZ-0005By-Hw for ****.*****@******.co.uk; Mon, 30 Nov 2009 16:48:46 +0000 Received: from sha-exch8.shared.ifeltd.com ([10.1.20.8]) by win-s-manc1.shared.ifeltd.com with Microsoft SMTPSVC(6.0.3790.3959); Mon, 30 Nov 2009 16:48:34 +0000 Received: from sha-exch9.shared.ifeltd.com ([10.1.20.9]) by sha-exch8.shared.ifeltd.com with Microsoft SMTPSVC(6.0.3790.3959); Mon, 30 Nov 2009 16:48:34 +0000 Received: from SHA-EXCH13.shared.ifeltd.com (10.1.20.13) by sha-exch9.shared.ifeltd.com (10.1.20.9) with Microsoft SMTP Server (TLS) id 8.1.393.1; Mon, 30 Nov 2009 16:48:25 +0000 Received: from SHA-EXCH12.shared.ifeltd.com ([fe80::ecba:36d0:eec5:c928]) by SHA-EXCH13.shared.ifeltd.com ([fe80::212b:916c:70c7:a4e5%11]) with mapi; Mon, 30 Nov 2009 16:48:05 +0000 From: Alex Brown To: "****.*****@*****.co.uk" Date: Mon, 30 Nov 2009 16:48:04 +0000 Subject: testing Thread-Topic: testing Thread-Index: AQHKcdzZg4oiDsOYIEio/7k6bCk8BQ== Message-ID: Accept-Language: en-US, en-GB Content-Language: en-GB X-MS-Has-Attach: X-MS-TNEF-Correlator: acceptlanguage: en-US, en-GB Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 X-OriginalArrivalTime: 30 Nov 2009 16:48:34.0235 (UTC) FILETIME=[F48178B0:01CA71DC] Here are the headers using my previous exchange host: Delivered-To: ****.*****@******.co.uk.test-google-a.com Received: by 10.223.120.148 with SMTP id d20cs333076far; Mon, 30 Nov 2009 08:48:35 -0800 (PST) Received: by 10.213.2.70 with SMTP id 6mr4797985ebi.25.1259599715739; Mon, 30 Nov 2009 08:48:35 -0800 (PST) Return-Path: Received: from relay005.apm-internet.net (relay005.apm-internet.net [85.119.248.8]) by mx.google.com with SMTP id 26si13030993ewy.23.2009.11.30.08.48.35; Mon, 30 Nov 2009 08:48:35 -0800 (PST) Received-SPF: neutral (google.com: 85.119.248.8 is neither permitted nor denied by best guess record for domain of ****@*********.com) client-ip=85.119.248.8; Authentication-Results: mx.google.com; spf=neutral (google.com: 85.119.248.8 is neither permitted nor denied by best guess record for domain of ****@*********.com) smtp.mail=****@*********.com Received: (qmail 60920 invoked from network); 30 Nov 2009 16:48:34 -0000 Received: from unknown (HELO MTAb.MsExchange2007.com) (89.31.236.50) by relay005.apm-internet.net with SMTP; 30 Nov 2009 16:48:35 -0000 X-APM-IP: 89.31.236.50 X-APM-Score: 1 Received-SPF: none (relay005.apm-internet.net: domain at alexjamesbrown.com does not designate permitted sender hosts) Received: from EXHUB02.SL.local (no.ptr.hostlogic.biz [89.31.236.28]) by MTAb.MsExchange2007.com (Spam Firewall) with ESMTP id B677A34FE0F for ; Mon, 30 Nov 2009 16:48:33 +0000 (GMT) Received: from EXHUB02.SL.local (no.ptr.hostlogic.biz [89.31.236.28]) by MTAb.MsExchange2007.com with ESMTP id 8X5B8V4tExVzoNyU for ; Mon, 30 Nov 2009 16:48:34 +0000 (GMT) Received: from EXCCR03STORE.SL.local ([10.0.0.2]) by EXHUB02.SL.local ([192.168.92.64]) with mapi; Mon, 30 Nov 2009 16:48:31 +0000 From: Alex James Brown To: "****.*****@******.co.uk" Date: Mon, 30 Nov 2009 16:48:30 +0000 Subject: testing from o Thread-Topic: testing from o Thread-Index: AQHKcdzyY1iBFWiol0ykG6xPQUZiTg== Message-ID: Accept-Language: en-US, en-GB Content-Language: en-GB X-MS-Has-Attach: X-MS-TNEF-Correlator: acceptlanguage: en-US, en-GB Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0

    Read the article

  • Route packets from one VPN to another

    - by Mike
    I have two OpenVPN servers (10.8.0.0 and 10.9.0.0) set up on my OpenSUSE server. Within one network, each computer is visible to any other one, but I'd like to make it so that computers are visible across networks. I'd like to route the packets like this: when a user (say 10.8.0.6) pings an address on the other VPN (10.9.0.6), the packets are routed to the 10.9.0.1 and then to the appropriate computer in this VPN. How do I achieve this using iptables or a different tool? I tried the commands at the end of this section with no avail.

    Read the article

  • Improving TCP performance over a gigabit network with lots of connections and high traffic of small packets

    - by MinimeDJ
    I’m trying to improve my TCP throughput over a “gigabit network with lots of connections and high traffic of small packets”. My server OS is Ubuntu 11.10 Server 64bit. There are about 50.000 (and growing) clients connected to my server through TCP Sockets (all on the same port). 95% of of my packets have size of 1-150 bytes (TCP header and payload). The rest 5% vary from 150 up to 4096+ bytes. With the config below my server can handle traffic up to 30 Mbps (full duplex). Can you please advice best practice to tune OS for my needs? My /etc/sysctl.cong looks like this: kernel.pid_max = 1000000 net.ipv4.ip_local_port_range = 2500 65000 fs.file-max = 1000000 # net.core.netdev_max_backlog=3000 net.ipv4.tcp_sack=0 # net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.core.somaxconn = 2048 # net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 65536 16777216 # net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_mem = 50576 64768 98152 # net.core.wmem_default = 65536 net.core.rmem_default = 65536 net.ipv4.tcp_window_scaling=1 # net.ipv4.tcp_mem= 98304 131072 196608 # net.ipv4.tcp_timestamps = 0 net.ipv4.tcp_rfc1337 = 1 net.ipv4.ip_forward = 0 net.ipv4.tcp_congestion_control=cubic net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 0 # net.ipv4.tcp_orphan_retries = 1 net.ipv4.tcp_fin_timeout = 25 net.ipv4.tcp_max_orphans = 8192 Here are my limits: $ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 193045 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1000000 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 1000000 [ADDED] My NICs are the following: $ dmesg | grep Broad [ 2.473081] Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.62.12-0 (2011/03/20) [ 2.477808] bnx2x 0000:02:00.0: eth0: Broadcom NetXtreme II BCM57711E XGb (A0) PCI-E x4 5GHz (Gen2) found at mem fb000000, IRQ 28, node addr d8:d3:85:bd:23:08 [ 2.482556] bnx2x 0000:02:00.1: eth1: Broadcom NetXtreme II BCM57711E XGb (A0) PCI-E x4 5GHz (Gen2) found at mem fa000000, IRQ 40, node addr d8:d3:85:bd:23:0c [ADDED 2] ethtool -k eth0 Offload parameters for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp-segmentation-offload: on udp-fragmentation-offload: off generic-segmentation-offload: on generic-receive-offload: on large-receive-offload: on rx-vlan-offload: on tx-vlan-offload: on ntuple-filters: off receive-hashing: off [ADDED 3] sudo ethtool -S eth0|grep -vw 0 NIC statistics: [1]: rx_bytes: 17521104292 [1]: rx_ucast_packets: 118326392 [1]: tx_bytes: 35351475694 [1]: tx_ucast_packets: 191723897 [2]: rx_bytes: 16569945203 [2]: rx_ucast_packets: 114055437 [2]: tx_bytes: 36748975961 [2]: tx_ucast_packets: 194800859 [3]: rx_bytes: 16222309010 [3]: rx_ucast_packets: 109397802 [3]: tx_bytes: 36034786682 [3]: tx_ucast_packets: 198238209 [4]: rx_bytes: 14884911384 [4]: rx_ucast_packets: 104081414 [4]: rx_discards: 5828 [4]: rx_csum_offload_errors: 1 [4]: tx_bytes: 35663361789 [4]: tx_ucast_packets: 194024824 [5]: rx_bytes: 16465075461 [5]: rx_ucast_packets: 110637200 [5]: tx_bytes: 43720432434 [5]: tx_ucast_packets: 202041894 [6]: rx_bytes: 16788706505 [6]: rx_ucast_packets: 113123182 [6]: tx_bytes: 38443961940 [6]: tx_ucast_packets: 202415075 [7]: rx_bytes: 16287423304 [7]: rx_ucast_packets: 110369475 [7]: rx_csum_offload_errors: 1 [7]: tx_bytes: 35104168638 [7]: tx_ucast_packets: 184905201 [8]: rx_bytes: 12689721791 [8]: rx_ucast_packets: 87616037 [8]: rx_discards: 2638 [8]: tx_bytes: 36133395431 [8]: tx_ucast_packets: 196547264 [9]: rx_bytes: 15007548011 [9]: rx_ucast_packets: 98183525 [9]: rx_csum_offload_errors: 1 [9]: tx_bytes: 34871314517 [9]: tx_ucast_packets: 188532637 [9]: tx_mcast_packets: 12 [10]: rx_bytes: 12112044826 [10]: rx_ucast_packets: 84335465 [10]: rx_discards: 2494 [10]: tx_bytes: 36562151913 [10]: tx_ucast_packets: 195658548 [11]: rx_bytes: 12873153712 [11]: rx_ucast_packets: 89305791 [11]: rx_discards: 2990 [11]: tx_bytes: 36348541675 [11]: tx_ucast_packets: 194155226 [12]: rx_bytes: 12768100958 [12]: rx_ucast_packets: 89350917 [12]: rx_discards: 2667 [12]: tx_bytes: 35730240389 [12]: tx_ucast_packets: 192254480 [13]: rx_bytes: 14533227468 [13]: rx_ucast_packets: 98139795 [13]: tx_bytes: 35954232494 [13]: tx_ucast_packets: 194573612 [13]: tx_bcast_packets: 2 [14]: rx_bytes: 13258647069 [14]: rx_ucast_packets: 92856762 [14]: rx_discards: 3509 [14]: rx_csum_offload_errors: 1 [14]: tx_bytes: 35663586641 [14]: tx_ucast_packets: 189661305 rx_bytes: 226125043936 rx_ucast_packets: 1536428109 rx_bcast_packets: 351 rx_discards: 20126 rx_filtered_packets: 8694 rx_csum_offload_errors: 11 tx_bytes: 548442367057 tx_ucast_packets: 2915571846 tx_mcast_packets: 12 tx_bcast_packets: 2 tx_64_byte_packets: 35417154 tx_65_to_127_byte_packets: 2006984660 tx_128_to_255_byte_packets: 373733514 tx_256_to_511_byte_packets: 378121090 tx_512_to_1023_byte_packets: 77643490 tx_1024_to_1522_byte_packets: 43669214 tx_pause_frames: 228 Some info about SACK: When to turn TCP SACK off?

    Read the article

  • Networking- Wireless and Wired not working

    - by JJ White
    So everything in Ubuntu has been working great until networking stopped working. I've spent the better part of two days scouring for a fix with no luck. Here is my info...your help would so be appreciated. grep -i eth /var/log/syslog | tail Sep 25 16:31:59 jj-laptop NetworkManager[970]: <info> (eth0): cleaning up... Sep 25 16:31:59 jj-laptop NetworkManager[970]: <info> (eth0): taking down device. Sep 25 16:31:59 jj-laptop kernel: [23403.998837] sky2 0000:02:00.0: eth0: disabling interface Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): now managed Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): bringing up device. Sep 25 16:35:54 jj-laptop kernel: [23413.629424] sky2 0000:02:00.0: eth0: enabling interface Sep 25 16:35:54 jj-laptop kernel: [23413.635703] ADDRCONF(NETDEV_UP): eth0: link is not ready Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): preparing device. Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): deactivating device (reason 'managed') [2] and then ifconfig -a eth0 Link encap:Ethernet HWaddr 00:17:42:14:e9:e1 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:4605 errors:0 dropped:0 overruns:0 frame:0 TX packets:287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:315161 (315.1 KB) TX bytes:63680 (63.6 KB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:13018 errors:0 dropped:0 overruns:0 frame:0 TX packets:13018 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:880484 (880.4 KB) TX bytes:880484 (880.4 KB) wlan0 Link encap:Ethernet HWaddr 00:13:02:d0:ee:13 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) also iwconfig lo no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. and of course sudo lshw -C network *-network description: Ethernet interface product: 88E8055 PCI-E Gigabit Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 12 serial: 00:17:42:14:e9:e1 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A latency=0 link=no multicast=yes port=twisted pair speed=1Gbit/s resources: irq:44 memory:f0000000-f0003fff ioport:2000(size=256) memory:c0a00000-c0a1ffff *-network DISABLED description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d0:ee:13 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.2.0-31-generic firmware=15.32.2.9 latency=0 link=no multicast=yes wireless=IEEE 802.11abg resources: irq:45 memory:c0100000-c0100fff last but not least lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 dm_crypt 22528 0 rfcomm 38139 0 parport_pc 32114 0 bnep 17830 2 ppdev 12849 0 bluetooth 158438 10 rfcomm,bnep binfmt_misc 17292 1 snd_hda_codec_idt 60251 1 pcmcia 39791 0 joydev 17393 0 snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 yenta_socket 27428 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event pcmcia_rsrc 18367 1 yenta_socket wacom_w8001 12906 0 irda 185517 0 arc4 12473 2 iwl3945 73111 0 iwl_legacy 71134 1 iwl3945 mac80211 436455 2 iwl3945,iwl_legacy cfg80211 178679 3 iwl3945,iwl_legacy,mac80211 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq dm_multipath 22710 0 pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc psmouse 96619 0 apanel 12718 0 serport 12808 1 serio_raw 13027 0 crc_ccitt 12595 1 irda mac_hid 13077 0 snd 62064 15 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_t imer,snd_seq_device input_polldev 13648 1 apanel soundcore 14635 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm lp 17455 0 fujitsu_laptop 18504 0 parport 40930 3 parport_pc,ppdev,lp dm_raid45 76451 0 xor 25987 1 dm_raid45 dm_mirror 21822 0 dm_region_hash 16065 1 dm_mirror dm_log 18193 3 dm_raid45,dm_mirror,dm_region_hash sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci sky2 49545 0 i915 414939 3 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915

    Read the article

  • Lot of Multicast traffic on LAN

    - by Nel
    Recently the whole network at work is being hit by multicast traffic originating on the LAN itself. I did some investigating and the service which seems to be responsible is ws-discovery. I have attached a screenshot of wireshark capturing the traffic. I have tried shutting down the source machine from which it was originating, but the multicast traffic still seems to be present in the network. My network topology 2 subnets - 10.10.10.0/24 and 10.20.10.0/24. Gateway is a debian system. We have 3 switches for 3 floors. They are all unmanaged Dlink 24-port switches. Multicast blocking at switch level is out of the question. Any solutions? :(

    Read the article

  • lubuntu - audio drives not recognized

    - by TheAdnan
    still no sound after doing that.. I typed sudo dpkg -l | grep -e alsa -e pulseaudio again, and got this: ii alsa-base 1.0.25+dfsg-0ubuntu4 all ALSA driver configuration files ii alsa-utils 1.0.25-4ubuntu2 i386 Utilities for configuring and using ALSA ii gnome-alsamixer 0.9.7~cvs.20060916.ds.1-3ubuntu1 i386 ALSA sound mixer for GNOME ii gstreamer0.10-alsa:i386 0.10.36-1.1ubuntu1 i386 GStreamer plugin for ALSA ii gstreamer0.10-pulseaudio:i386 0.10.31-3+nmu1ubuntu2 i386 GStreamer plugin for PulseAudio ii pulseaudio 1:3.0-0ubuntu6 i386 PulseAudio sound server ii pulseaudio-module-x11 1:3.0-0ubuntu6 i386 X11 module for PulseAudio sound server ii pulseaudio-utils 1:3.0-0ubuntu6 i386 Command line tools for the PulseAudio sound server After the commands in 2., pulseaudio is working again, but there is still no sound.. I tried the command in 3., and here is what I got: ~$ sudo gedit /etc/default/speech-dispatcher sudo: gedit: command not found

    Read the article

  • Enterprise Architecture IS (should not be) Arbitrary

    - by pat.shepherd
    I took a look at a blog entry today by Jordan Braunstein where he comments on another blog entry titled “Yes, “Enterprise Architecture is Relative BUT it is not Arbitrary.”  The blog makes some good points such as the following: Lock 10 architects in 10 separate rooms; provide them all an identical copy of the same business, technical, process, and system requirements; have them design an architecture under the same rules and perspectives; and I guarantee your result will be 10 different architectures of varying degrees. SOA Today: Enterprise Architecture IS Arbitrary Agreed, …to a degree….but less so if all 10 truly followed one of the widely accepted EA frameworks. My thinking is that EA frameworks all focus on getting the business goals/vision locked down first as the primary drivers for decisions made lower down the architecture stack.  Many people I talk to, know about frameworks such as TOGAF, FEA, etc. but seldom apply the tenants to the architecture at hand.  We all seem to want to get right into the Visio diagrams and boxes and arrows and connecting protocols and implementation details and lions and tigers and bears (Oh, my!) too early. If done properly the Business, Application and Information architectures are nailed down BEFORE any technological direction (SOA or otherwise) is set.  Those 3 layers and Governance (people and processes), IMHO, are layers that should not vary much as they have everything to do with understanding the business -- from which technological conclusions can later be drawn. I really like what he went on to say later in the post about the fact that architecture attempts to remove the amount of variance between the 10 different architect’s work.  That is the real heart of what EA is about; REMOVING THE ARBRITRARITY.

    Read the article

  • Cumulative Updates available for SQL Server 2008 SP2 & SP3

    - by AaronBertrand
    Today Microsoft has released two new cumulative updates for SQL Server 2008. Cumulative Update #10 for SQL Server 2008 Service Pack 2 Knowledge Base Article: KB #2696625 At the time of writing, there is one fix listed The build number is 10.00.4332 Cumulative Update #5 for SQL Server 2008 Service Pack 3 Knowledge Base Article: KB #2696626 At the time of writing, there are four fixes listed The build number is 10.00.5785 As usual, I'll post my standard disclaimer here: these updates are NOT for SQL...(read more)

    Read the article

  • Cumulative Updates available for SQL Server 2008 SP2 & SP3

    - by AaronBertrand
    Today Microsoft has released two new cumulative updates for SQL Server 2008. Cumulative Update #10 for SQL Server 2008 Service Pack 2 Knowledge Base Article: KB #2696625 At the time of writing, there is one fix listed The build number is 10.00.4332 Cumulative Update #5 for SQL Server 2008 Service Pack 3 Knowledge Base Article: KB #2696626 At the time of writing, there are four fixes listed The build number is 10.00.5785 As usual, I'll post my standard disclaimer here: these updates are NOT for SQL...(read more)

    Read the article

  • How to automate changing my ip?

    - by callisto
    I am very new to OSX. I will use my MBP at work and home. I would like to be easily able to switch my ip when changing location. Thus far I have dabbled with the automator, hoping to do something like this: [pseudocode] If IP = 192.168.0.10 root# changeip 192.168.0.10 10.0.0.15 else root# changeip 10.0.0.15 192.168.0.10 The reason for this is that my IP from home will not allow me access at work and vice versa. I have friends and family who drop in now and then, multiple wireless devices set up for the home IP range. Changing all of that to accommodate one new device (the Macbook) would make me reconsider my foray into OSX. I'd rather have the MBP adapt to me than I to it.

    Read the article

  • CodePlex Daily Summary for Friday, February 04, 2011

    CodePlex Daily Summary for Friday, February 04, 2011Popular ReleasesOJDetective: Branch828: New branch for testing.TVA Code Library: TVA Code Library v4.0.1 Release: This download contains TVA Code Library class libraries, tools, templates and help docs that target the .NET Framework 4.0. Build Date: 02/04/2011 Build Version: 4.0.1.62247 See TVA Code Library v4.0.1 Release Notes for a detailed list of changes.ASP.NET MVC SiteMap provider: MvcSiteMapProvider 3.0.0 for MVC3: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. ChangelogTargeting ASP.NET MVC 3 and .NET 4.0 Additional UpdatePriority options for generating XML sitemaps Allow to specify target on SiteMapTitleAttribute One action with multiple routes and breadcrumbs Medium Trust optimizations Create SiteMapTitleAttribute for setting parent title IntelliSense for your sitemap with MvcSiteMapSchem...Rawr: Rawr 4.0.18 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...patterns & practices SharePoint Guidance: SharePoint Guidance 2010 Hands On Lab: SharePoint Guidance 2010 Hands On Lab consists of six labs: one for logging, one for service location, and four for application setting manager. Each lab takes about 20 minutes to walk through. Each lab consists of a PDF document. You can go through the steps in the doc to create solution and then build/deploy the solution and run the lab. For those of you who wants to save the time, we included the final solution so you can just build/deploy the solution and run the lab.Value Injecter - object(s) to -> object mapper: 2.3: it lets you define your own convention-based matching algorithms (ValueInjections) in order to match up (inject) source values to destination values. inject from multiple sources in one InjectFrom added ConventionInjectionFacebook C# SDK: 5.0.1 (BETA): PLEASE TAKE A FEW MINUTES TO GIVE US SOME FEEDBACK: Facebook C# SDK Survey This is second BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. This release contains some breaking changes. Particularly with authentication. After spending time reviewing the trouble areas that people are having using t...TweetSharp: TweetSharp v2.0.0.0 - Preview 10: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 9 ChangesAdded support for trends Added support for Silverlight 4 Elevated WP7 fixes Third Party Library VersionsHammock v1.1.7: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comPhalanger - The PHP Language Compiler for the .NET Framework: 2.0 (February 2011): Next release of Phalanger; again faster, more stable and ready for daily use. Based on many user experiences this release is one more step closer to be perfect compiler and runtime of your old PHP applications; or perfect platform for migrating to .NET. February 2011 release of Phalanger introduces several changes, enhancements and fixes. See complete changelist for all the changes. To improve the performance of your application using MySQL, please use Managed MySQL Extension for Phalanger....Chemistry Add-in for Word: Chemistry Add-in for Word - Version 1.0: On February 1, 2011, we announced the availability of version 1 of the Chemistry Add-in for Word, as well as the assignment of the open source project to the Outercurve Foundation by Microsoft Research and the University of Cambridge. System RequirementsHardware RequirementsAny computer that can run Office 2007 or Office 2010. Software RequirementsYour computer must have the following software: Any version of Windows that can run Office 2007 or Office 2010, which includes Windows XP SP3 and...Minemapper: Minemapper v0.1.4: Updated mcmap, now supports new block types. Added a Worlds->'View Cache Folder' menu item.StyleCop for ReSharper: StyleCop for ReSharper 5.1.15005.000: Applied patch from rodpl for merging of stylecop setting files with settings in parent folder. Previous release: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new Objec...Minecraft Tools: Minecraft Topographical Survey 1.4: MTS requires version 4 of the .NET Framework - you must download it from Microsoft if you have not previously installed it. This version of MTS adds MCRegion support and fixes bugs that caused rendering to fail for some users. New in this version of MTS: Support for rendering worlds compressed with MCRegion Fixed rendering failure when encountering non-NBT files with the .dat extension Fixed rendering failure when encountering corrupt NBT files Minor GUI updates Note that the command...MVC Controls Toolkit: Mvc Controls Toolkit 0.8: Fixed the following bugs: *Variable name error in the jvascript file that prevented the use of the deleted item template of the Datagrid *Now after the changes applied to an item of the DataGrid are cancelled all input fields are reset to the very initial value they had. *Other minor bugs. Added: *This version is available both for MVC2, and MVC 3. The MVC 3 version has a release number of 0.85. This way one can install both version. *Client Validation support has been added to all control...Office Web.UI: Beta preview (Source): This is the first Beta. it includes full source code and all available controls. Some designers are not ready, and some features are not finalized allready (missing properties, draft styles) ThanksASP.net Ribbon: Version 2.2: This release brings some new controls (part of Office Web.UI). A few bugs are fixed and it includes the "auto resize" feature as you resize the window. (It can cause an infinite loop when the window is too reduced, it's why this release is not marked as "stable"). I will release more versions 2.3, 2.4... until V3 which will be the official launch of Office Web.UI. Both products will evolve at the same speed. Thanks.xUnit.net - Unit Testing for .NET: xUnit.net 1.7: xUnit.net release 1.7Build #1540 Important notes for Resharper users: Resharper support has been moved to the xUnit.net Contrib project. Important note for TestDriven.net users: If you are having issues running xUnit.net tests in TestDriven.net, especially on 64-bit Windows, we strongly recommend you upgrade to TD.NET version 3.0 or later. This release adds the following new features: Added support for ASP.NET MVC 3 Added Assert.Equal(double expected, double actual, int precision) Ad...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.3: Version: 2.0.0.3 (Milestone 3): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...VivoSocial: VivoSocial 7.4.2: Version 7.4.2 of VivoSocial has been released. If you experienced any issues with the previous version, please update your modules to the 7.4.2 release and see if they persist. If you have any questions about this release, please post them in our Support forums. If you are experiencing a bug or would like to request a new feature, please submit it to our issue tracker. Web Controls * Updated Business Objects and added a new SQL Data Provider File. Groups * Fixed a security issue whe...PHP Manager for IIS: PHP Manager 1.1.1 for IIS 7: This is a minor release of PHP Manager for IIS 7. It contains all the functionality available in 56962 plus several bug fixes (see change list for more details). Also, this release includes Russian language support. SHA1 codes for the downloads are: PHPManagerForIIS-1.1.0-x86.msi - 6570B4A8AC8B5B776171C2BA0572C190F0900DE2 PHPManagerForIIS-1.1.0-x64.msi - 12EDE004EFEE57282EF11A8BAD1DC1ADFD66A654New Projects.NET API for ZingChart: This is a .NET assembly that accepts key value pairs in the form of a dictionary object. It also allows you to set the properties needed for a ZingChart. It includes a ToJSON method that returns the appropriate JSON to rend either a Flash or HTML 5 version of ZingChart..net vkontakte api: vkontakte .net wrapper vor vkontakte api, written in C# 2.0CID Delivery: CIDContact Form for Umbraco: Contact Form for Umbraco is an extension for Umbraco (surprise!). It's supposed to be just like Umbraco: Simple, flexible and friendly.DashBoard: ProyectoenVerifyV2.0: Server Compare toolHttp Post: HttpPost makes it easier to post form data and upload files via HTTP. Supports uri-encoded and Multipart (http-boundary) formats. Written in C#, just 10 KBMemoDb: MemoDb is a memory database that supports transactionability. MemoDb is for mocking Linq providers in unit testing environments.MiRCraft: Mechanics Inspired Realitypower: educational purposesSpace Invaders Clone: <Space invaders clone> <C# with XNA 3.0>SSIS Dataflow Discoverer (DFLD): Dataflow Discoverer (DFLD) is a command-line discovery utility that detects and writes the metadata of SSIS dataflow columns to a SQL Server lookup table. DFLD detects Dataflows nested within containers up to any level of nesting. Test Case Editor 2010: TCE 2010 is a lightweight application that makes it easier for MTM users to edit both Test Cases and Shared Steps without using MTM. This project was inspired by ajryan at http://teststepseditor.codeplex.com However, it has since taken on a different functionality and appearance.TFS Project: Team Foundation ProjectTimeSnapper GCAL Plugin: TimeSnapper GCAL PluginTower of Hanoi: tower of hanoiTwilight 1.0 (Beta): My first Twitter application written in VB.Net and TwitterVB. It performs basic Twitter functions and is designed to run as a desktop client application. For more information about TwitterVB Goto http://twittervb.codeplex.comUnicode Regions Generator: A Silverlight app that generate unicode regions used in a file.WCF-Based Streaming File Server: Use a secure token to access a file on a remote UNC drive. The token expires after a period of time, and can be adapted into other security mechanismsWidget Twitter: Projeto que será apresentado no webcast Criando uma Aplicação (Widget) para o Twitter, no dia 24/02/2011.

    Read the article

  • RAID1 rebuild fails due to disk errors

    - by overlord_tm
    Quick info: Dell R410 with 2x500GB drives in RAID1 on H700 Adapter Recently one of drives in RAID1 array on server failed, lets call it Drive 0. RAID controller marked it as fault and put it offline. I replaced faulty disk with new one (same series and manufacturer, just bigger) and configured new disk as hot spare. Rebuild from Drive1 started immediately and after 1.5 hour I got message that Drive 1 failed. Server was unresponsive (kernel panic) and required reboot. Given that half hour before this error rebuild was at about 40%, I estimated that new drive is not in sync yet and tried to reboot just with Drive 1. RAID controller complained a bit about missing RAID arrays, but it found foreign RAID array on Drive 1 and I imported it. Server booted and it runs (from degraded RAID). Here is SMART data for disks. Drive 0 (the one that failed first) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 3 Spin_Up_Time POS--K 142 142 021 - 3866 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10432 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 112 106 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 198 000 - 3 And Drive 1 (the drive which was reported healthy from controller until rebuild was attempted) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 35 3 Spin_Up_Time POS--K 143 143 021 - 3841 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10455 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 114 105 000 - 29 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 3 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 In extended error logs from SMART I found: Drive 0 has only one error Error 1 [0] occurred at disk power-on lifetime: 10282 hours (428 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 18 00 00 00 6a 24 20 40 00 Error: IDNF at LBA = 0x006a2420 = 6956064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 60 00 f8 00 00 00 6a 24 20 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 18 00 60 00 00 00 6a 24 00 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 80 00 58 00 00 00 6a 23 80 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 68 00 50 00 00 00 6a 23 18 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 10 00 10 00 00 00 6a 23 00 40 00 17d+20:25:18.104 WRITE FPDMA QUEUED But Drive 1 has 883 errors. I see only few last ones and all errors I can see look like this: Error 883 [18] occurred at disk power-on lifetime: 10454 hours (435 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 00 80 00 00 39 97 19 c2 40 00 Error: AMNF at LBA = 0x399719c2 = 966203842 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:57.802 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:57.779 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:55.704 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:55.681 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:53.606 READ FPDMA QUEUED Given those errors, is there any way I can rebuild RAID back, or should I make backup, shutdown server, replace disks with new ones and restore it? What about if I dd faulty disk to new one from linux running on USB/CD? Also, if anyone have more experiences, what could be causes for those errors? Crappy controller or disks? Disks are about 1 year old, but it is pretty unbelievable to me that both would die within so short timespan.

    Read the article

  • A problem with conky in Gnome 3.4 [closed]

    - by Pranit Bauva
    Possible Duplicate: Conky not working in Gnome 3.4 My conky in Gnome 3.4 is not working. When I run a conky script nothing appears but the process is running. Please also see the debug code : pungi-man@pungi-man:~$ sh conky_startup.sh Conky: forked to background, pid is 3157 Conky: desktop window (c00023) is subwindow of root window (aa) Conky: window type - override Conky: drawing to created window (0x2200001) Conky: drawing to double buffer My conky script is : background yes update_interval 1 cpu_avg_samples 2 net_avg_samples 2 temperature_unit celsius double_buffer yes no_buffers yes text_buffer_size 2048 gap_x 10 gap_y 30 minimum_size 190 450 maximum_width 190 own_window yes own_window_type override own_window_transparent yes own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below border_inner_margin 0 border_outer_margin 0 alignment tr draw_shades no draw_outline no draw_borders no draw_graph_borders no override_utf8_locale yes use_xft yes xftfont caviar dreams:size=8 xftalpha 0.5 uppercase no default_color FFFFFF color1 DDDDDD color2 AAAAAA color3 888888 color4 666666 lua_load /home/pungi-man/.conky/conky_grey.lua lua_draw_hook_post main TEXT ${voffset 35} ${goto 95}${color4}${font ubuntu:size=22}${time %e}${color1}${offset -50}${font ubuntu:size=10}${time %A} ${goto 85}${color2}${voffset -2}${font ubuntu:size=9}${time %b}${voffset -2} ${color3}${font ubuntu:size=12}${time %Y}${font} ${voffset 80} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}CPU ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${top name 1}${alignr}${top cpu 1}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color2}${top name 2}${alignr}${top cpu 2}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color3}${top name 3}${alignr}${top cpu 3}% ${goto 90}${cpugraph 10,100 666666 666666} ${goto 90}${voffset -10}${font Ubuntu:size=7,weight:normal}${color}${threads} process ${voffset 20} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}MEM ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${top_mem name 1} ${alignr}${top_mem mem 1}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color2}${top_mem name 2} ${alignr}${top_mem mem 2}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color3}${top_mem name 3} ${alignr}${top_mem mem 3}% ${voffset 15} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}DISKS ${goto 90}${diskiograph 30,100 666666 666666}${voffset -30} ${goto 90}${font Ubuntu:size=7,weight:normal}${color}used: ${fs_used /home} /home ${goto 90}${font Ubuntu:size=7,weight:normal}${color}used: ${fs_used /} / ${voffset 10} ${goto 70}${font Ubuntu:size=18,weight:bold}${color3}NET${alignr}${color2}${font Ubuntu:size=7,weight:bold}${color1}${if_up eth0}eth ${addr eth0} ${endif}${if_up wlan0}wifi ${addr wlan0}${endif} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}open ports: ${alignr}${color2}${tcp_portmon 1 65535 count} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}${offset 10}IP${alignr}DPORT ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 0}${alignr 1}${tcp_portmon 1 65535 rport 0} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 1}${alignr 1}${tcp_portmon 1 65535 rport 1} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 2}${alignr 1}${tcp_portmon 1 65535 rport 2} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 3}${alignr 1}${tcp_portmon 1 65535 rport 3} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 4}${alignr 1}${tcp_portmon 1 65535 rport 4} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 5}${alignr 1}${tcp_portmon 1 65535 rport 5} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 6}${alignr 1}${tcp_portmon 1 65535 rport 6} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 7}${alignr 1}${tcp_portmon 1 65535 rport 7} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 8}${alignr 1}${tcp_portmon 1 65535 rport 8} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 9}${alignr 1}${tcp_portmon 1 65535 rport 9} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 10}${alignr 1}${tcp_portmon 1 65535 rport 10} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 11}${alignr 1}${tcp_portmon 1 65535 rport 11} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 12}${alignr 1}${tcp_portmon 1 65535 rport 12} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 13}${alignr 1}${tcp_portmon 1 65535 rport 13} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 14}${alignr 1}${tcp_portmon 1 65535 rport 14} This script works fine with unity but faces problems in gnome 3.4 Can anyone please sort it out?

    Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >