Search Results

Search found 16415 results on 657 pages for 'computer'.

Page 185/657 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

• connecting to bsnl wll, with huawei fixed wireless modem with connected to usb port on linux mint.

  - by Rakesh

  On windows, when I plugged in the usb connector, to the device was recognized as a mass storage device and installed all the drivers, to my computer, then the device, automatically restarted and started behaving like a modem, I'm writing this post, using the same modem, through windows... On linux mint (debian kernel, similar to ubuntu 8.10), the device is recognized as a mass storage device, some times, but, has no programs, useful for linux... When I use the modem on windows and restart the computer and login to linux, the device shows up as "not yet configured" in the terminal command "lsusb"... I googled a lot for solutions, tried many things, atlast, configured it and run the command "wvdial". But, get the error, that the modem is not responding, at last ! :'( Please help me out... Many more people are facing this problem, as I could discover, when I googled for it. this is the website address of huawei, the company of my modem... "www.huawei.com" Specification: model: ETS1220 FEQ: 800M Thank you.

  Read the article

• Looking for a software solution which acts like a hardware KVM

  - by Daisetsu

  I've seen programs like Synergy before which allow a keyboard and mouse to be used across multiple systems. Unfortunately Synergy treats both systems like they are the same thing (when you move the mouse too far to the right it jumps to the other computer, along with keyboard input). I only have 1 monitor so what I need to do here is have a quick way to view my other desktop that is easy to manage. Remote desktop is difficult because you have to take it out of fullscreen, then minimize it and then re-maximize it when you want to use it again. If there were a single button I could hit to switch to the other computer that would be optimal. Both computers are on the same lan.

  Read the article

• Tool for automatic start from standby / sleep mode at a given time

  - by hstoerr

  Is there a Windows-tool that is able to automatically revive the computer from standby / sleep mode at a given time?

  Read the article

• Mac Grey/White Screen of Death

  - by cust0s

  The other night I updated my iTunes to the latest version (through Software Update) when I came to turn on my computer I was greeted with the dreaded white screen of death. I use an early 2008 iMac 24". I've tried the basic things, unplugging/turning off accessories, trying to boot from the install disk, reseting pram, etc, etc. Still no luck and no change what-so-ever. All I've been able to ascertain that my keyboard still works (by ejecting). I should point out that I did recently replace my Hard drive with a Western Digital Black 500GB (though the computer is well out of warrenty) and I'm a little concerned that the problem could be the screen.

  Read the article

• Programming as a minor

  - by Tomas Cokis

  Hello Everyone! I've never asked a question here at programmers, and for reasons which will become obvious later I've never answered one here, but I do poke around in short bursts. Anyway, I'm 15 right now, and I've been programming in C++ for 4 years, just working on my own projects that are aim so high as to never be finished. I've been working on a single project for the last year, and every 3 months, I add a new system into it. It might be a value tabling directory enabled log system, or a render system, or a class to load up xml files, whatever it is, I don't mind too much that the overall project (a 3d engine) isn't ever going to get finished, I just get some satisfaction from getting what I have done building and running. I don't know what I want to do when I grow up, although I suspect I'll go into some form of engineering, but I was interested in knowing if I do choose to go into a career as a developer, what kind of material I could look at to push myself up and get myself experience that might help my career later. I'm not talking about books in particular, I'm more interested in subjects areas that will get me access to good job opportunities, or that will give me a hand-up if I do computer science and software related courses at uni. One of the things I was thinking of doing was designing some of the logic gate components of a small computer - which I started briefly over the holidays, working out integer addition, subtraction and multiplication. That kind of stuff interests me, but is it really useful - or more useful then just more programming? But anyway, Any advice? Should I continue on my perpetual 3d engine? Are there any other projects or particular accomplishments that would help my education? Perhaps I should mention that I live in Perth, Australia, so local software companies are likely to be more scarce then usual.

  Read the article

• The MAPI call 'OpenMsgStore' failed: The MAPI provider failed Exchange 2003

  - by realitnzsam

  Hi guys, Recently we moved our Exchange 2003 (SP2) database from one drive to another. Now every other day or so we get errors coming up in the event log: Event Type: Error Event Source: MSExchangeSA Event Category: MAPI Session Event ID: 9175 Date: 10/03/2010 Time: 8:06:15 a.m. User: N/A Computer: SERVER Description: The MAPI call 'OpenMsgStore' failed with the following error: The attempt to log on to the Microsoft Exchange Server computer has failed. The MAPI provider failed. Microsoft Exchange Server Information Store ID no: 8004011d-0512-00000000 For more information, click http://www.microsoft.com/contentredirect.asp. Restarting the Exchange Information Store fixes this instantly, but until we do it Outlook won't connect to Exchange and Blackberry emails aren't pushing out.

  Read the article

• installing windows XP in Samsung SENS 145 plus notebook (no CD drive)

  - by user13267

  Hi I was trying to install Windows XP in a Samsung SENS 145 plus Notebook. It does not have a cd drive and I already managed to format it and semi install Windows XP, so now it does not even boot up either. This is what I did: Since it supports USB booting, I first made a bootable USB of Windows XP (Korean version; SP2 I think, may be SP 3) using Novicorp WinToFlash enter link description here. It managed to boot up at first and I was able to format the C driveand get Windows install to start up. It took forever to copy all the files from the USB and after the first reboot, before installation started, I cancelled the reboot from windows install, went to BIOS and changed the boot device priority from USB to internal hard drive. But now on bootup it showed me a list with two options for booting windows XP (much like in the case of a multi OS system) so I assumed that I had formatted drive D by mistake and installed XP there, instead of on C drive. Anyway, I chose one of them and it continued my Windows installation. I got the blue installation screen that shows ads about Windows XP on the right frame and estimated remaining time on the left. However, after completing the process, after the first reboot, instead of showing the Windows XP logo, it says \system32\hall.dll is missing (or corrupted I'm not sure, I needed to install the Korean version of windows and I could not exactly read the error message, however it was one that I have already seen in an English version installation, and I am sure it says either missing or corrupted). The problem is, now it shows the same error again when I try to reboot it from the USB drive as well. I tried to boot a portable version of Linux I made in another USB, but the computer does not boot up from that USB, and it shows hal.dll error when I try to boot it using the WIN XP installation USB I made, as well as when I try to boot it from the hard drive, where I suppose Win XP is now semiinstalled. So now I can't get the computer to start up at all, except going to the BIOS. What else can I try to solve this? Also, would it be possible to install XP on this computer by connecting it to another one running Windows 7 ultimate, through the ethernet card? That is, network just the two computers together, then install windows XP on the notebook from the desktop running windows 7? Please help, I'm running out of ideas on this one. If Korean version of windows XP is the problem then I am willing to install English version as well. (but I need to make sure if that is the real cause of the problem)

  Read the article

• Upgrading Visual Studio 2010

  - by Martin Hinshelwood

  I have been running Visual Studio 2010 as my main development studio on my development computer since the RC was released. I need to upgrade that to the RTM, but first I need to remove it. Microsoft have done a lot of work to make this easy, and it works. Its as easy as uninstalling from the control panel. I have had may previous versions of Visual Studio 2010 on this same computer with no need to rebuild to remove all the bits. Figure: Run the uninstall from the control panel to remove Visual Studio 2010 RC Figure: The uninstall removes everything for you.  Figure: A green tick means the everything went OK. If you get a red cross, try installing the RTM anyway and it should warn you with what was not uninstalled properly and you can remove it manually.   Once you have VS2010 RC uninstalled installing should be a breeze. The install for 2010 is much faster than 2008. Which could take all day, and then some on slower computers. This takes around 20 minutes even on my small laptop. I always do a full install as although I have to do c# I sometimes get to use a proper programming language VB.NET. Seriously, there is nothing worse than trying to open a project and the other developer has used something you don't have. Its not their fault. Its yours! Save yourself the angst and install Fully, its only 5.9GB. Figure: I always select all of the options.   Now go forth and develop! Preferably in VB.NET…   Technorati Tags: Visual Studio,VS2010,VS 2010

  Read the article

• Add Mirror for volumes other than the last one in Windows 7 (disk "not up-to-date")

  - by rakslice

  I'm using Windows 7 x64 Ultimate. I have an existing 4TB disk with 3 NTFS volumes, a new 3TB blank disk, and I'm trying to mirror the volumes onto the new disk. My Windows install is on an SSD which is Disk 0. The 4TB disk with volumes is Disk 1, and the new blank disk is Disk 2. I can add a mirror successfully for the last volume, but when I try to add a mirror for the first volume I immediately get errors (see below). Is there something I special I need to do to add a mirror for a volume other than the last one? More info: I opened Disk Management, right-clicked on the first volume on the existing disk, went to Add Mirror, and selected the new disk. The first time I did this I was prompted to convert the new disk to a Dynamic Disk, which I approved. Subsequently I got a message: The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by using the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart the computer. I've refreshed disk management, restarted the computer, and converted the new disk to basic and back to dynamic, but I still get that error message. Looking around for suggestions of a workaround, I saw a suggestion to use the diskpart command line tool. Running diskpart from the Start Menu as Administrator, I did select volume 2 (the first volume I want to mirror) and then add disk 2 (the new disk), and received a somewhat similar error: Virtual Disk Service error: The disk's extent information is corrupted. DiskPart has referenced an object which is not up-to-date. Refresh the object by using the RESCAN command. If the problem persists exit DiskPart, then restart DiskPart or restart the computer. A rescan appears to be successful: DISKPART> select disk 2 Disk 2 is now the selected disk. DISKPART> rescan Please wait while DiskPart scans your configuration... DiskPart has finished scanning your configuration. but attempting to add the mirror again resulted in the same error. The only similar report I found online was this: http://www.sevenforums.com/hardware-devices/335780-unable-mirror-all-but-last-partition-drive.html Based on that I attempted to mirror the last volume on the disk to the new disk using diskpart, and that started successfully -- it is currently resynchronizing. More Background: In the course of dealing with a failing 3TB hard drive, I bought a replacement 4TB drive and installed it, then copied the partitions from the failing drive to it using Minitool Partition Wizard Home, and then removed the failing drive and was up and running again normally. Now I've received a warranty replacement for the failing drive, and installed it, and now I'm attempting to mirror my partitions to it.

  Read the article

• Why does a website server recieve local files much slower than recieve files on other websites?

  - by T...

  The server at http://any2djvu.djvuzone.org receives same files from local computers much slower than from links on other websites (with the same files have been uploaded to the other websites, such as dropbox.com). The speed of uploading a file from local computers to other websites such as dropbox is also much faster than to any2djvu website. For example, a pdf file of 17MB needs more than 1 min to be uploaded to any2djvu server from a local computer with normal ISP such as Comcast High-speed internet, but takes less than 3 seconds from a dropbox link to any2djvu server, and takes around 10 seconds from the same local computer to dropbox. I wonder why there is such big differences for the speeds of different uploading ways to a web server? Thanks!

  Read the article

• cannot mount remote partition using fstab/fuse

  - by HorusKol

  Using a combination of http://ubuntu-tutorials.com/2007/01/02/mount-remote-directories-securely-with-ssh-ubuntu-6061-610/ and http://www.tuxfiles.org/linuxhelp/fstab.html I figured I could mount the root of another computer to somewhere on my new laptop to make it easier to transfer files and stuff. Now, I can connect through SSH and browser the files through an ad-hoc mount - but I would like to be able to do this automatically, and so had a look at fstab. my new entry in fstab is: remote_comp:/ /var/remote_comp fuse defaults 0 0 but testing with mount -a results in the following error: /bin/sh: remote_comp:/: not found I thought the problem was because I was trying to mount the root of the other computer, but even trying sub-directories result in the same error message.

  Read the article

• Brand new battery is 100% charged but at 0% capacity

  - by Chris Conway

  I just bought a brand new battery to replace one that had seemingly died. I followed the instructions that came with the battery and charged it overnight, then ran my computer on battery until it was in a critical state and charged it overnight again. Now the battery appears to be 100% charged and at the same time at 0% capacity—when it's plugged in it doesn't charge and when it's unplugged the computer immediately goes into low power mode. I've taken the battery out and checked the contacts. I've rebooted the system with and without the battery. Nothing seems to help. I'm not sure if I should blame the battery, the laptop, the charger, or the power management software for this state of affairs. The obvious answer would be the battery but I bought this battery because another year-old battery exhibited similar behavior—I assumed it was dead and a Dell tech came to the same conclusion. I'm loathe to order another new battery without first exploring other explanations. What can I do to diagnose this problem? Here's the /proc info: $ cat /proc/acpi/battery/BAT0/state present: yes capacity state: critical charging state: charged present rate: 1 mA remaining capacity: 0 mAh present voltage: 9754 mV $ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 6600 mAh last full capacity: 6789 mAh battery technology: rechargeable design voltage: 11100 mV design capacity warning: 660 mAh design capacity low: 200 mAh cycle count: 0 capacity granularity 1: 66 mAh capacity granularity 2: 66 mAh model number: DELL WK serial number: 4043 battery type: LION OEM info: SMP

  Read the article

• Black Screen after Resume from Sleep (Kubuntu)

  - by user20271

  I know there is a lot of other posts like this, but I have been looking for hours and I still haven't found any solution. I have recently installed Kubuntu Linux along side my Windows 7, the sleep on my Win7 works fine and resumes like normal. When I am loaded into Kubuntu, and I put my laptop to sleep, it goes into sleep as normal. When I go to RESUME from the sleep, the screen stays solid black, it doesn't light up, no blinking curser or anything. The Wi-Fi light is 'off' (orange) and I cannot turn it on. The Caps lock and the Num lock lights on the keyboard blink slowly. I hear something on the inside of the computer start to spin. I am not very experienced with Kubuntu/Linux, but I do know a bunch of computer terminology, I am still far from an expert though. I have about 300GB designated to my Win7 stuff, and another partition with about 100GB for my Kubuntu Linux. My computers specs are as follows: Windows 7 64-bit I have the most recent version of Kubuntu because I just downloaded it a few days ago and updated it yesterday. AMD Athlon Duel-Core processor 4GB of RAM And it is a HP G61 Laptop

  Read the article

• No "Choose OS" screen after co-installation of Ubuntu 12.04

  - by Léon McGregor

  I don't have any technical knowledge of Ubuntu but wanted to install it on a partition. Step-by-step of what i did. used disk management in windows 7 to clear 50gb of space used a usb live ubuntu 12.04 installer in custom install mode used the installer's built in disk manager to set up 2gb swap space and 48gb ext4 space ran installation, with option to copy over documents and settings from windows 7 restarted after completion. After this, my computer automatically loads ubuntu 12 and skips the option to load windows 7. i know the files are still there, as i can see them in the file manager. When trying to fix with the win7 installer dvd it tries to repair the OS in drive [D:] i.e. it recognises the disc itself as the OS and ignores the [c:] files. I think, after browsing around here, similar problems suggest this is a problem with the boot loader, but if the win7 dvd won't work, then i don't have any way to fix this. does anyone know of a way to force the computer to show a "choose OS" screen?

  Read the article

• Display won't come back from power saver mode

  - by tynor

  I wan't sure where exactly to post this question, but this one seemed the most relevant. I have a Dell LCD monitor running off a Dell Inspiron 531 tower with an Nvidia GeForce 8600 GT video card. Just recently, when I turn my computer on, the display immediately enters its "Power Saver" mode, and never wakes up. This problem doesn't occur with other computers, or even with this same computer when I use the integrated graphics. I have no other displays to test the card on. I have also tried replacing the power supply (my original one, which ran that video card for 4 years, was 300w, and I replaced it with 500w). Is there anything else I can try to troubleshoot this issue?

  Read the article

• Remote monitoring with screen capture

  - by Anonymous

  Is there anyway i can perodically take screenshots of a remote computer using nagios? I am experimenting with Nagios, and i am trying to explore different monitoring. So my question is apart from using nagios to monitor cpu usage, bandwidth utilization, uptime etc.. can i monitor my worker's productivity by checking what is he doing on his computer in a form of image output. Being able to monitor processes would not be of much help to me, as i only know if he or she is running firefox.exe for example he maybe using excessive use of firefox for facebook or other stuff but he claims he is troubleshooting and looking for solutions on forums. I saw a check_vnc script but i am unable to install the requsite vnc server anyone succesfully tried the vnc script care to share how to go about it? If not anyother way to try this?

  Read the article

• What You Said: How You Track Your Time

  - by Jason Fitzpatrick

  Earlier this week we asked you to share your favorite time tracking tips, tricks, and tools. Now we’re back to highlight the techniques HTG readers use to keep tabs on their time. While more than one of you expressed confusion over the idea of tracking how you spend all your time, many of you were more than happy to share the reasons for and the methods you use to stay on top of your time expenditures. Scott uses a fluid and flexible project management tool: I use kanbanflow.com, with two boards to manage task prioritisation and backlog. One board called ‘Current Work’ has three columns ‘Do Today’, ‘In Progress’ and ‘Done’. The other is called ‘Backlog’, which splits tasks into priority groups – ‘Distractions (NU+NI)’, ‘Goals (NU+I)’, ‘Interruptions (U+NI)’, ‘Interruptions (U+NI)’ and ‘Critical (U+I)’, where U is Urgent and I is Important (and N is Not). At the end of each day, I move things from my Backlog to my ‘Current Work’ board, with the idea to keep complete Goals before they become Critical. That way I can focus on ‘Current Work’ Do Today so I don’t feel overwhelmed and can plan my day. As priorities change or interruptions pop up, it’s just a matter of moving tasks between boards. I have both tabs open in my browser all day – this is probably good for knowledge workers strapped to their desk, not so good for those in meetings all day. In that case, go with the calendar on your phone. While the above description might make it sound really technical, we took the cloud-based app for a spin and found the interface to be very flexible and easy to use. Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked

  Read the article

• How can I access my music anywhere?

  - by musicfreak

  So here's the idea: I use multiple computers on an almost daily basis. I would like to be able to access my entire music library from any of those computers through the Internet. Is there a service or perhaps some software that would allow me to host my music "in the cloud", or in some other way access it from a different computer? I've searched for something like this and the closest I've found is the Media Player application found in Opera Unite, but that requires my home computer to be turned on at all times, which is less than ideal. I'm willing to pay, but not so much that I could just rent a private server for a lower price. Thanks in advance.

  Read the article

• winusb formatting and installation error, lost data storage on 32gb flash drive

  - by Cary Felton

  i recently purchased a pny brand 32gb usb drive to use for configuring a dual boot on my computer, and for hdd files backup. i also recently installed zorin os 6.1 as my main os, and then downloaded winusb for linux, and set it to install the iso for windows 8 release preview as the activation code is still good untill jan.2013, and there was an error on the installation. i rebooted the computer, plugged in the usb drive, and i went from 32gb usable space to somehow having a partitioned drive (mounted as two separate drives) one being 3.7gb, and the other being i believe 25gb or so... i then formatted the drive with gparted back to fat32, and it still read as a windows usb with the installation files on it still? so then i took my usb drive to my library which runs windows 8, i installed bootice, and completely reformatted my usb drive, and somehow it is usable, but still not perfect. it reads i only have 29.9gb usable space... i have already thought of the non usable area, and that doesnt account for this error as when i first bought the drive and plugged it in on linux, it read total drive space was 32.2 and exactly 32 was usable. somehow i am short by 2gb of space which is very critical for what i am doing. i love linux, i only needed windows for bluray playback with daplayer as it wont work well in wine, but if i keep losing space on my usb drives im afraid ill have to switch back. any help would be appreciated as i already visited pny's site, and they have no support for this issue, and im not that fond of partitions, file systems, or formatting.

  Read the article

• Stop VLC player from saving effects & filter settings

  - by bocamax

  VLC Player v1.1.11 Windows 7 Ultimate VLC player launches each new video with setting I used once to brighten a dark video. On a second computer, VLC player opens all videos rotated 270 which was a feature I used once. I now have to manually uncheck Image adjust on one computer & uncheck Transform on another for each video to have it play without these custom settings. I've custom mapped VLC Hotkeys that I use extensively. As a result, I do not want to "reset preferences" and lose my Hotkey mapping. VLC Tools Settings Video Effects Basic Image Adjust (Brightness, Contrast, etc.) VLC Tools Settings Video Effects Basic Transform (Rotate 90, 180, 270) Is there a setting I'm not finding to stop VLC from applying a one time adjustment to all videos?

  Read the article

• Quiet Sound while recording using the "Stereo Mix" option on Windows XP.

  - by DragoonX

  I'm trying to record some of my work, and the video capture program I'm using works fine. It's HyperCam2, and since it's not really professional, I don't care about that little thing in the corner. Anyways, If I check the record sound option and put it on the highest quality, and I want it to record the sounds playing from my computer, I have it record the "Stereo Mix" setting. However, after a quick test, I saw that even though my computer was at max volume, the recorded sound was very quiet, almost inaudible. Thinking it was just HyperCam, I downloaded Audacity, and only met similar results. While I'm not entirely savvy with hardware, I BELIEVE this to be my soundcard: SoundMAX Integrated Digital HD Audio

  Read the article

• Cannot move/drag/drop windows/items in remote VNC session

  - by hansioux

  I find it a little hard to believe that no one here has asked this question, I tried searching for it but it isn't asked, so here goes: I setup a Ubuntu desktop computer with VNC to use as a server. And use another Ubuntu desktop computer to VNC into it. The rest of the VNC works ok, but drag and drop with mouse is gone. Thus I can not move windows, or drag and drop items via VNC. I am using the default remote desktop in System - Preferences to setup my server. And use Remmina as my client. The same happens using MS Windows's VNC clients connecting to my Ubuntu desktop. I did a bit of searching on google, and there are actually a lot of reports regarding this issue. But, oddly there is no solution. There are even bug reports made for this since Ubuntu 9.10, yet here it still is in Ubuntu 11.04. There have been suggestions that the bugs is in gtk, as see in link below: http://ubuntuforums.org/showthread.php?t=1497635&page=2 libgtk2.0-0 stable(lenny) -> DnD works libgtk2.0-0 lenny-backport (libgtk2.0-0_2.18.6-1~bpo50+1_i386) -> DnD still works libgtk2.0-0 testing (libgtk2.0-0_2.20.1-2_i386) -> DnD broken please don't give answers such as "use NX", "use ssh -x" or "use x11vnc". I am aware that some people don't have this problem with x11vnc, and I have setup x11vnc before, but i can't for this setup. I am setting this up so Windows only friends/families can use it.

  Read the article

• Small Business Server services will not start, and remote desktop and UAC are broken

  - by Stephen Jennings

  Yesterday I began setting up a server with Windows Small Business Server 2008. All I am configuring it for right now is to be a domain controller and Exchange server. I completed the initial setup of SBS then started looking through different connection options (allowing VPN versus using a TS Gateway). After I rebooted one time, I started having three not-obviously-related issues: First, I could no longer remote desktop into the computer. I ran TCPView and saw that it was no longer listening on port 3389. I checked everything in Terminal Service Configuration but everything shows the computer ought to be allowing connections. Also, when I tried to use anything that required user account control elevation, the UAC dialog never popped up and the program that was waiting just froze. If I try to run "regedit" from the Run box, for example, it never appears. When I run in safe mode which does not run with UAC, I was able to access everything. I didn't want to deal with it, so I turned off UAC and rebooted. Finally, in the Windows SBS Console, there are status indicators for Security, Updates, Backup, and Other Alerts. The first three get stuck saying "Querying". Looking in the computer alerts, I have events showing the following services stopped: Background Intelligent Transfer Service KtmRm for Distributed Transaction Coordinator Distributed Transaction Coordinator Microsoft Exchange Information Store Microsoft Exchange System Attendant Microsoft Exchange Transport Windows Remote Management Update Services Windows Update I figured I must have configured something wrong accidentally and I couldn't find anything using Google explaining what might be the case, so I just decided to format the hard drive and reinstall SBS from scratch. I did this and everything was working last night, but I just turned the machine back on and it is doing the same thing again! On my second install, I did not configure anything except the following (all from SBS Console): Connect to the Internet (set IP and router address) Turn off customer feedback. Set up internet address. Decline to use a Smart Host for email. Added one standard user account. Since this happened again and I was very careful the second time not to configure anything outside of the SBS Console, I feel like there's something else going on. Right now the machine is on an isolated network that does have internet access. My desktop is the only other machine plugged into this network. Any and all help is appreciated (before I tear my hair out!)

  Read the article

• How to install Windows 7 From Network?

  - by George

  Hello SuperUser My question is that is it possible to install Windows 7 (Current RTM Version) on a computer without using removable media like DVD or USB. First thing that comes to my mind is network but i dont have experience of doing Fresh Install of Windows 7 via Network. How to install Windows 7 via network without any removable media? P.S. I know some may think that doing so, is just a waste of time and it's easier to do it with removable media, but in current situation the target PC neather has CD/DVD Drive nor supports booting from USB. And in addition to that, Target computer is connected to Network via Wireless Network (Dunno if it will make any problem with installation).

  Read the article

• Is data on RAM memory recoverable?

  - by Ehsan Mamakani

  Imagine you're working on your computer and suddenly the electricity goes out is there a way to recover the data lost in this case?

  Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >