Search Results

Search found 13281 results on 532 pages for 'model associations'.

Page 185/532 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

• How to check if a cdrom is in the tray remotely (via ssh)?

  - by adempewolff

  I have a server running Ubuntu 10.04 (it's on the other side of the world and I haven't built up the wherewithal to upgrade it remotely yet) and I have been told that there is a CD in one of it's two CD drives. I want to rip an image of the cd and then download it to my local computer (I don't need help with either of these steps). However, I cannot seem to confirm whether or not there actually is a CD in the drive as I was told. It did not automatically mount anywhere (which I'm thinking might just be a result of it being a headless server not running X, nautilus, or any of the other nice user friendly things). There are two CD drives connected via SCSI: austin@austinvpn:/proc/scsi$ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD400EB-75CP Rev: 06.0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: Lite-On Model: LTN486S 48x Max Rev: YDS6 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: SAMSUNG Model: CD-R/RW SW-248F Rev: R602 Type: CD-ROM ANSI SCSI revision: 05 However when I try mounting either of these devices (and every other device that could possibly be the cd-drive), it says no medium found: austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/scd1 /cdrom mount: no medium found on /dev/sr1 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/scd0 /cdrom mount: no medium found on /dev/sr0 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrom /cdrom mount: no medium found on /dev/sr1 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrom1 /cdrom mount: no medium found on /dev/sr0 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrw /cdrom mount: no medium found on /dev/sr1 Here are the contents of my /dev folder: austin@austinvpn:/proc/scsi$ ls /dev agpgart loop6 ram6 tty10 tty38 tty8 austinvpn loop7 ram7 tty11 tty39 tty9 block lp0 ram8 tty12 tty4 ttyS0 bsg mapper ram9 tty13 tty40 ttyS1 btrfs-control mcelog random tty14 tty41 ttyS2 bus mem rfkill tty15 tty42 ttyS3 cdrom net root tty16 tty43 urandom cdrom1 network_latency rtc tty17 tty44 usbmon0 cdrw network_throughput rtc0 tty18 tty45 usbmon1 char null scd0 tty19 tty46 usbmon2 console oldmem scd1 tty2 tty47 usbmon3 core parport0 sda tty20 tty48 usbmon4 cpu_dma_latency pktcdvd sda1 tty21 tty49 vcs disk port sda2 tty22 tty5 vcs1 dri ppp sda5 tty23 tty50 vcs2 ecryptfs psaux sg0 tty24 tty51 vcs3 fb0 ptmx sg1 tty25 tty52 vcs4 fd pts sg2 tty26 tty53 vcs5 full ram0 shm tty27 tty54 vcs6 fuse ram1 snapshot tty28 tty55 vcs7 hpet ram10 snd tty29 tty56 vcsa input ram11 sndstat tty3 tty57 vcsa1 kmsg ram12 sr0 tty30 tty58 vcsa2 log ram13 sr1 tty31 tty59 vcsa3 loop0 ram14 stderr tty32 tty6 vcsa4 loop1 ram15 stdin tty33 tty60 vcsa5 loop2 ram2 stdout tty34 tty61 vcsa6 loop3 ram3 tty tty35 tty62 vcsa7 loop4 ram4 tty0 tty36 tty63 vga_arbiter loop5 ram5 tty1 tty37 tty7 zero And here is my fstab file: austin@austinvpn:/proc/scsi$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/austinvpn-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=ed5520ae-c690-4ce6-881e-3598f299be06 /boot ext2 defaults 0 2 /dev/mapper/austinvpn-swap_1 none swap sw 0 0 Am I missing something/doing something wrong, or is there just no CD in the drive or is the drive possibly broken? Is there any nice command to list devices with mountable media? Thanks in advance for any help!

  Read the article

• SQL SERVER – How to Roll Back SQL Server Database Changes

  - by Pinal Dave

  In a perfect scenario, no unexpected and unplanned changes occur. There are no unpleasant surprises, no inadvertent changes. However, even with all precautions and testing, there is sometimes a need to revert a structure or data change. One of the methods that can be used in this situation is to use an older database backup that has the records or database object structure you want to revert to. For this method, you have to have the adequate full database backup and a tool that will help you with comparison and synchronization is preferred. In this article, we will focus on another method: rolling back the changes. This can be done by using: An option in SQL Server Management Studio T-SQL, or ApexSQL Log The first two solutions have been described in this article The disadvantages of these methods are that you have to know when exactly the change you want to revert happened and that all transactions on the database executed in a specific time range are rolled back – the ones you want to undo and the ones you don’t. How to easily roll back SQL Server database changes using ApexSQL Log? The biggest challenge is to roll back just specific changes, not all changes that happened in a specific time range. While SQL Server Management Studio option and T-SQL read and roll forward all transactions in the transaction log files, I will show you a solution that finds and scripts only the specific changes that match your criteria. Therefore, you don’t need to worry about all other database changes that you don’t want to roll back. ApexSQL Log is a SQL Server disaster recovery tool that reads transaction logs and provides a wide range of filters that enable you to easily rollback only specific data changes. First, connect to the online database where you want to roll back the changes. Once you select the database, ApexSQL Log will show its recovery model. Note that changes can be rolled back even for a database in the Simple recovery model, when no database and transaction log backups are available. However, ApexSQL Log achieves best results when the database is in the Full recovery model and you have a chain of subsequent transaction log backups, back to the moment when the change occurred. In this example, we will use only the online transaction log. In the next step, use filters to read only the transactions that happened in a specific time range. To remove noise, it’s recommended to use as many filters as possible. Besides filtering by the time of the transaction, ApexSQL Log can filter by the operation type: Table name: As well as transaction state (committed, aborted, running, and unknown), name of the user who committed the change, specific field values, server process IDs, and transaction description. You can select only the tables affected by the changes you want to roll back. However, if you’re not certain which tables were affected, you can leave them all selected and once the results are shown in the main grid, analyze them to find the ones you to roll back. When you set the filters, you can select how to present the results. ApexSQL Log can automatically create undo or redo scripts, export the transactions into an XML, HTML, CSV, SQL, or SQL Bulk file, and create a batch file that you can use for unattended transaction log reading. In this example, I will open the results in the grid, as I want to analyze them before rolling back the transactions. The results contain information about the transaction, as well as who and when made it. For UPDATEs, ApexSQL Log shows both old and new values, so you can easily see what has happened. To create an UNDO script that rolls back the changes, select the transactions you want to roll back and click Create undo script in the menu. For the DELETE statement selected in the screenshot above, the undo script is: INSERT INTO [Sales].[PersonCreditCard] ([BusinessEntityID], [CreditCardID], [ModifiedDate]) VALUES (297, 8010, '20050901 00:00:00.000') When it comes to rolling back database changes, ApexSQL Log has a big advantage, as it rolls back only specific transactions, while leaving all other transactions that occurred at the same time range intact. That makes ApexSQL Log a good solution for rolling back inadvertent data and schema changes on your SQL Server databases. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: ApexSQL

  Read the article

• Writing an unthemed view while still using Orchard shapes and helpers

  - by Bertrand Le Roy

  This quick tip will show how you can write a custom view for a custom controller action in Orchard that does not use the current theme, but that still retains the ability to use shapes, as well as zones, Script and Style helpers. The controller action, first, needs to opt out of theming: [Themed(false)] public ActionResult Index() {} .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Then, we still want to use a shape as the view model, because Clay is so awesome: private readonly dynamic _shapeFactory; public MyController(IShapeFactory shapeFactory) { _shapeFactory = shapeFactory; } [Themed(false)] public ActionResult Index() { return View(_shapeFactory.MyShapeName( Foo: 42, Bar: "baz" )); } As you can see, we injected a shape factory, and that enables us to build our shape from our action and inject that into the view as the model. Finally, in the view (that would in Views/MyController/Index.cshtml here), just use helpers as usual. The only gotcha is that you need to use “Layout” in order to declare zones, and that two of those zones, Head and Tail, are mandatory for the top and bottom scripts and stylesheets to be injected properly. Names are important here. @{ Style.Include("somestylesheet.css"); Script.Require("jQuery"); Script.Include("somescript.js"); using(Script.Foot()) { <script type="text/javascript"> $(function () { // Do stuff }) </script> } } <!DOCTYPE html> <html> <head> <title>My unthemed page</title> @Display(Layout.Head) </head> <body> <h1>My unthemed page</h1> <div>@Model.Foo is the answer.</div> </body> @Display(Layout.Tail) </html> Note that if you define your own zones using @Display(Layout.SomeZone) in your view, you can perfectly well send additional shapes to them from your controller action, if you injected an instance of IWorkContextAccessor: _workContextAccessor.GetContext().Layout .SomeZone.Add(_shapeFactory.SomeOtherShape()); Of course, you’ll need to write a SomeOtherShape.cshtml template for that shape but I think this is pretty neat.

  Read the article

• Very slow KVM in Ubuntu 12.04

  - by Guy Fawkes

  I use Ubuntu 12.04 64-bit and KVM, my CPU is Core i5 3.3 GHz and I have 8 GB of DDR3 RAM. I run Windows 7 in KVM and it's extremely slow. My co-worker use Debian on the same PC configuration and can run Windows 7 extremely fast! Where can be my problem? sudo cat /etc/libvirt/qemu/windows.xml <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit windows or other application using the libvirt API. --> <domain type='kvm'> <name>windows</name> <uuid>5c685175-baea-0ca6-591f-8269d923ffb8</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/windows.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='network'> <mac address='52:54:00:94:63:91'/> <source network='default'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='ich6'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='vga' vram='262144' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain>

  Read the article

• Simple MVVM Walkthrough – Refactored

  - by Sean Feldman

  JR has put together a good introduction post into MVVM pattern. I love kick start examples that serve the purpose well. And even more than that I love examples that also can pass the real world projects check. So I took the sample code and refactored it slightly for a few aspects that a lot of developers might raise a brow. Michael has mentioned model (entity) visibility from view. I agree on that. A few other items that don’t settle are using property names as string (magical strings) and Saver class internal casting of a parameter (custom code for each Saver command). Fixing a property names usage is a straight forward exercise – leverage expressions. Something simple like this would do the initial job: class PropertyOf<T> { public static string Resolve(Expression<Func<T, object>> expression) { var member = expression.Body as MemberExpression; return member.Member.Name; } } With this, refactoring of properties names becomes an easy task, with confidence that an old property name string will not get left behind. An updated Invoice would look like this: public class Invoice : INotifyPropertyChanged { private int id; private string receiver; public event PropertyChangedEventHandler PropertyChanged; private void OnPropertyChanged(string propertyName) { if (PropertyChanged != null) { PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); } } public int Id { get { return id; } set { if (id != value) { id = value; OnPropertyChanged(PropertyOf<Invoice>.Resolve(x => x.Id)); } } } public string Receiver { get { return receiver; } set { receiver = value; OnPropertyChanged(PropertyOf<Invoice>.Resolve(x => x.Receiver)); } } } For the saver, I decided to change it a little so now it becomes a “view-model agnostic” command, one that can be used for multiple commands/view-models. Updated Saver code now accepts an action at construction time and executes that action. No more black magic internal class Command : ICommand { private readonly Action executeAction; public Command(Action executeAction) { this.executeAction = executeAction; } public bool CanExecute(object parameter) { return true; } public event EventHandler CanExecuteChanged; public void Execute(object parameter) { // no more black magic executeAction(); } } Change in InvoiceViewModel is instantiation of Saver command and execution action for the specific command. public ICommand SaveCommand { get { if (saveCommand == null) saveCommand = new Command(ExecuteAction); return saveCommand; } set { saveCommand = value; } } private void ExecuteAction() { DisplayMessage = string.Format("Thanks for creating invoice: {0} {1}", Invoice.Id, Invoice.Receiver); } This way internal knowledge of InvoiceViewModel remains in InvoiceViewModel and Command (ex-Saver) is view-model agnostic. Now the sample is not only a good introduction, but also has some practicality in it. My 5 cents on the subject. Sample code MvvmSimple2.zip

  Read the article

• My frustum culling is culling from the wrong point

  - by Xbetas

  I'm having problems with my frustum being in the wrong origin. It follows the rotation of my camera but not the position. In my camera class I'm generating a view-matrix: void Camera::Update() { UpdateViewMatrix(); glMatrixMode(GL_MODELVIEW); //glLoadIdentity(); glLoadMatrixf(GetViewMatrix().m); } Then extracting the planes using the projection matrix and modelview matrix: void UpdateFrustum() { Matrix4x4 projection, model, clip; glGetFloatv(GL_PROJECTION_MATRIX, projection.m); glGetFloatv(GL_MODELVIEW_MATRIX, model.m); clip = model * projection; m_Planes[RIGHT][0] = clip.m[ 3] - clip.m[ 0]; m_Planes[RIGHT][1] = clip.m[ 7] - clip.m[ 4]; m_Planes[RIGHT][2] = clip.m[11] - clip.m[ 8]; m_Planes[RIGHT][3] = clip.m[15] - clip.m[12]; NormalizePlane(RIGHT); m_Planes[LEFT][0] = clip.m[ 3] + clip.m[ 0]; m_Planes[LEFT][1] = clip.m[ 7] + clip.m[ 4]; m_Planes[LEFT][2] = clip.m[11] + clip.m[ 8]; m_Planes[LEFT][3] = clip.m[15] + clip.m[12]; NormalizePlane(LEFT); m_Planes[BOTTOM][0] = clip.m[ 3] + clip.m[ 1]; m_Planes[BOTTOM][1] = clip.m[ 7] + clip.m[ 5]; m_Planes[BOTTOM][2] = clip.m[11] + clip.m[ 9]; m_Planes[BOTTOM][3] = clip.m[15] + clip.m[13]; NormalizePlane(BOTTOM); m_Planes[TOP][0] = clip.m[ 3] - clip.m[ 1]; m_Planes[TOP][1] = clip.m[ 7] - clip.m[ 5]; m_Planes[TOP][2] = clip.m[11] - clip.m[ 9]; m_Planes[TOP][3] = clip.m[15] - clip.m[13]; NormalizePlane(TOP); m_Planes[NEAR][0] = clip.m[ 3] + clip.m[ 2]; m_Planes[NEAR][1] = clip.m[ 7] + clip.m[ 6]; m_Planes[NEAR][2] = clip.m[11] + clip.m[10]; m_Planes[NEAR][3] = clip.m[15] + clip.m[14]; NormalizePlane(NEAR); m_Planes[FAR][0] = clip.m[ 3] - clip.m[ 2]; m_Planes[FAR][1] = clip.m[ 7] - clip.m[ 6]; m_Planes[FAR][2] = clip.m[11] - clip.m[10]; m_Planes[FAR][3] = clip.m[15] - clip.m[14]; NormalizePlane(FAR); } void NormalizePlane(int side) { float length = 1.0/(float)sqrt(m_Planes[side][0] * m_Planes[side][0] + m_Planes[side][1] * m_Planes[side][1] + m_Planes[side][2] * m_Planes[side][2]); m_Planes[side][0] /= length; m_Planes[side][1] /= length; m_Planes[side][2] /= length; m_Planes[side][3] /= length; } And check against it with: bool PointInFrustum(float x, float y, float z) { for(int i = 0; i < 6; i++) { if( m_Planes[i][0] * x + m_Planes[i][1] * y + m_Planes[i][2] * z + m_Planes[i][3] <= 0 ) return false; } return true; } Then i render using: camera->Update(); UpdateFrustum(); int numCulled = 0; for(int i = 0; i < (int)meshes.size(); i++) { if(!PointInFrustum(meshCenter.x, meshCenter.y, meshCenter.z)) { meshes[i]->SetDraw(false); numCulled++; } else meshes[i]->SetDraw(true); } What am i doing wrong?

  Read the article

• Designing status management for a file processing module

  - by bot

  The background One of the functionality of a product that I am currently working on is to process a set of compressed files ( containing XML files ) that will be made available at a fixed location periodically (local or remote location - doesn't really matter for now) and dump the contents of each XML file in a database. I have taken care of the design for a generic parsing module that should be able to accommodate the parsing of any file type as I have explained in my question linked below. There is no need to take a look at the following link to answer my question but it would definitely provide a better context to the problem Generic file parser design in Java using the Strategy pattern The Goal I want to be able to keep a track of the status of each XML file and the status of each compressed file containing the XML files. I can probably have different statuses defined for the XML files such as NEW, PROCESSING, LOADING, COMPLETE or FAILED. I can derive the status of a compressed file based on the status of the XML files within the compressed file. e.g status of the compressed file is COMPLETE if no XML file inside the compressed file is in a FAILED state or status of the compressed file is FAILED if the status of at-least one XML file inside the compressed file is FAILED. A possible solution The Model I need to maintain the status of each XML file and the compressed file. I will have to define some POJOs for holding the information about an XML file as shown below. Note that there is no need to store the status of a compressed file as the status of a compressed file can be derived from the status of its XML files. public class FileInformation { private String compressedFileName; private String xmlFileName; private long lastModifiedDate; private int status; public FileInformation(final String compressedFileName, final String xmlFileName, final long lastModified, final int status) { this.compressedFileName = compressedFileName; this.xmlFileName = xmlFileName; this.lastModifiedDate = lastModified; this.status = status; } } I can then have a class called StatusManager that aggregates a Map of FileInformation instances and provides me the status of a given file at any given time in the lifetime of the appliciation as shown below : public class StatusManager { private Map<String,FileInformation> processingMap = new HashMap<String,FileInformation>(); public void add(FileInformation fileInformation) { fileInformation.setStatus(0); // 0 will indicates that the file is in NEW state. 1 will indicate that the file is in process and so on.. processingMap.put(fileInformation.getXmlFileName(),fileInformation); } public void update(String filename,int status) { FileInformation fileInformation = processingMap.get(filename); fileInformation.setStatus(status); } } That takes care of the model for the sake of explanation. So whats my question? Edited after comments from Loki and answer from Eric : - I would like to know if there are any existing design patterns that I can refer to while coming up with a design. I would also like to know how I should go about designing the status management classes. I am more interested in understanding how I can model the status management classes. I am not interested in how other components are going to be updated about a change in status at the moment as suggested by Eric.

  Read the article

• PASS Summit 2012: keynote and Mobile BI announcements #sqlpass

  - by Marco Russo (SQLBI)

  Today at PASS Summit 2012 there have been several announcements during the keynote. Moreover, other news have not been highlighted in the keynote but are equally if not more important for the BI community. Let’s start from the big news in the keynote (other details on SQL Server Blog): Hekaton: this is the codename for in-memory OLTP technology that will appear (I suppose) in the next release of the SQL Server relational engine. The improvement in performance and scalability is impressive and it enables new scenarios. I’m curious to see whether it can be used also to improve ETL performance and how it differs from using SSD technology. Updates on Columnstore: In the next major release of SQL Server the columnstore indexes will be updatable and it will be possible to create a clustered index with Columnstore index. This is really a great news for near real-time reporting needs! Polybase: in 2013 it will debut SQL Server 2012 Parallel Data Warehouse (PDW), which will include the Polybase technology. By using Polybase a single T-SQL query will run queries across relational data and Hadoop data. A single query language for both. Sounds really interesting for using BigData in a more integrated way with existing relational databases. And, of course, to load a data warehouse using BigData, which is the ultimate goal that we all BI Pro have, right? SQL Server 2012 SP1: the Service Pack 1 for SQL Server 2012 is available now and it enable the use of PowerPivot for SharePoint and Power View on a SharePoint 2013 installation with Excel 2013. Power View works with Multidimensional cube: the long-awaited feature of being able to use PowerPivot with Multidimensional cubes has been shown by Amir Netz in an amazing demonstration during the keynote. The interesting thing is that the data model behind was based on a many-to-many relationship (something that is not fully supported by Power View with Tabular models). Another interesting aspect is that it is Analysis Services 2012 that supports DAX queries run on a Multidimensional model, enabling the use of any future tool generating DAX queries on top of a Multidimensional model. There are still no info about availability by now, but this is *not* included in SQL Server 2012 SP1. So what about Mobile BI? Well, even if not announced during the keynote, there is a dedicated session on this topic and there are very important news in this area: iOS, Android and Microsoft mobile platforms: the commitment is to get data exploration and visualization capabilities working within June 2013. This should impact at least Power View and SharePoint/Excel Services. This is the type of UI experience we are all waiting for, in order to satisfy the requests coming from users and customers. The important news here is that native applications will be available for both iOS and Windows 8 so it seems that Android will be supported initially only through the web. Unfortunately we haven’t seen any demo, so it’s not clear what will be the offline navigation experience (and whether there will be one). But at least we know that Microsoft is working on native applications in this area. I’m not too surprised that HTML5 is not the magic bullet for all the platforms. The next PASS Business Analytics conference in 2013 seems a good place to see this in action, even if I hope we don’t have to wait other six months before seeing some demo of native BI applications on mobile platforms! Viewing Reporting Services reports on iPad is supported starting with SQL Server 2012 SP1, which has been released today. This is another good reason to install SP1 on SQL Server 2012. If you are at PASS Summit 2012, come and join me, Alberto Ferrari and Chris Webb at our book signing event tomorrow, Thursday 8 2012, at the bookstore between 12:00pm and 12:30pm, or follow one of our sessions!

  Read the article

• Issues glVertexAttribPointer last 2 parameters?

  - by NoobScratcher

  Introduction Hello I will start out by explaining my setup, showing samples as I go along explaining the situation. I'm using these tools: OpenGL 3.3 GLSL 330 C++ Problem The problem is when I render the wavefront obj 3d model it gives a very weird visual glitch the model was supposed to be a square but instead its a triangluated mess with parts of the vertexes pointing in a stretched direction in massive amounts towards the bottom left side of the frustum.... Explanation: I'm using std::vectors to store my wavefront .obj model data using sscanf to get the floating point values into the structure members x,y,z and store them into the Points structure variable p; int index = IndexAssigner(1, 1); ifstream file (list[index].c_str() ); points.push_back(Point()); Point p; int face[4]; while (!file.eof() ) { char modelbuffer[10000]; file.getline(modelbuffer, 10000); switch(modelbuffer[0]) { case 'v' : sscanf(modelbuffer, "v %f %f %f", &p.x, &p.y, &p.z); points.push_back(p); break; case 'f': sscanf(modelbuffer, "f %d %d %d %d", face, face+1, face+2, face+3 ); faces.push_back(face[0]); faces.push_back(face[1]); faces.push_back(face[2]); faces.push_back(face[3]); } //Turn on FileReader aka "RENDER CODE" FileReader = true; } then I render the Points vector using the .data() member of std::vectors to the frustum. Other declarations: int numfloats = 4; float* point=reinterpret_cast<float*>(&points[0]); int num_bytes=numfloats*sizeof(float); Vector declarations: struct Point {float x, y , z; }; std::vector<int>faces; std::vector<Point>points; Render code: glGenBuffers(1, &vertexbuffer); glGenTextures(1, &ModelTexture); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer); glBindTexture(GL_TEXTURE_3D, ModelTexture); glTexImage2D(GL_TEXTURE_2D, 0,GL_RGBA, ModelSurface->w, ModelSurface->h, 0, GL_BGR, GL_UNSIGNED_BYTE, ModelSurface->pixels); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glBufferData(GL_ARRAY_BUFFER, sizeof(points), points.data(), GL_STATIC_DRAW); glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); glEnableVertexAttribArray(3); //Translation Process GLfloat TranslationMatrix[] = { 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 1.0, 0.0, 0.0, 0.0, 1.0 }; //Send Translation Matrix up to the vertex shader glUniformMatrix4fv(translation, 1, TRUE, TranslationMatrix); glDrawElements( GL_QUADS, faces.size(), GL_UNSIGNED_INT, faces.data()); I tried looking at what was causing this and went through every function every parameter ,etc looked at the man pages. Then found out that it could be my glVertexAttribPointer. Here are the man pages for glVertexAttribPointer http://www.opengl.org/sdk/docs/man/xhtml/glVertexAttribPointer.xml The last 2 parameters is my problem How do I write those 2 last parameters do I try putting the data from Points into it?. glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); How does it work with vectors? Is it fast?* if you can not be bothered too look at the man pages here is the scripts coming from the man pages directly. Stride Specifies the byte offset between consecutive generic vertex attributes. If stride is 0, the generic vertex attributes are understood to be tightly packed in the array. The initial value is 0. Pointer Specifies a pointer to the first component of the first generic vertex attribute in the array. The initial value is 0. If you want my full source - http://ideone.com/fPfkg Thanks Again if you do read this.

  Read the article

• My frustum culling is culling from the wrong point [SOLVED]

  - by Xbetas

  I'm having problems with my frustum being in the wrong origin. It follows the rotation of my camera but not the position. In my camera class I'm generating a view-matrix: void Camera::Update() { UpdateViewMatrix(); glMatrixMode(GL_MODELVIEW); //glLoadIdentity(); glLoadMatrixf(GetViewMatrix().m); } Then extracting the planes using the projection matrix and modelview matrix: void UpdateFrustum() { Matrix4x4 projection, model, clip; glGetFloatv(GL_PROJECTION_MATRIX, projection.m); glGetFloatv(GL_MODELVIEW_MATRIX, model.m); clip = model * projection; m_Planes[RIGHT][0] = clip.m[ 3] - clip.m[ 0]; m_Planes[RIGHT][1] = clip.m[ 7] - clip.m[ 4]; m_Planes[RIGHT][2] = clip.m[11] - clip.m[ 8]; m_Planes[RIGHT][3] = clip.m[15] - clip.m[12]; NormalizePlane(RIGHT); m_Planes[LEFT][0] = clip.m[ 3] + clip.m[ 0]; m_Planes[LEFT][1] = clip.m[ 7] + clip.m[ 4]; m_Planes[LEFT][2] = clip.m[11] + clip.m[ 8]; m_Planes[LEFT][3] = clip.m[15] + clip.m[12]; NormalizePlane(LEFT); m_Planes[BOTTOM][0] = clip.m[ 3] + clip.m[ 1]; m_Planes[BOTTOM][1] = clip.m[ 7] + clip.m[ 5]; m_Planes[BOTTOM][2] = clip.m[11] + clip.m[ 9]; m_Planes[BOTTOM][3] = clip.m[15] + clip.m[13]; NormalizePlane(BOTTOM); m_Planes[TOP][0] = clip.m[ 3] - clip.m[ 1]; m_Planes[TOP][1] = clip.m[ 7] - clip.m[ 5]; m_Planes[TOP][2] = clip.m[11] - clip.m[ 9]; m_Planes[TOP][3] = clip.m[15] - clip.m[13]; NormalizePlane(TOP); m_Planes[NEAR][0] = clip.m[ 3] + clip.m[ 2]; m_Planes[NEAR][1] = clip.m[ 7] + clip.m[ 6]; m_Planes[NEAR][2] = clip.m[11] + clip.m[10]; m_Planes[NEAR][3] = clip.m[15] + clip.m[14]; NormalizePlane(NEAR); m_Planes[FAR][0] = clip.m[ 3] - clip.m[ 2]; m_Planes[FAR][1] = clip.m[ 7] - clip.m[ 6]; m_Planes[FAR][2] = clip.m[11] - clip.m[10]; m_Planes[FAR][3] = clip.m[15] - clip.m[14]; NormalizePlane(FAR); } void NormalizePlane(int side) { float length = 1.0/(float)sqrt(m_Planes[side][0] * m_Planes[side][0] + m_Planes[side][1] * m_Planes[side][1] + m_Planes[side][2] * m_Planes[side][2]); m_Planes[side][0] *= length; m_Planes[side][1] *= length; m_Planes[side][2] *= length; m_Planes[side][3] *= length; } And check against it with: bool PointInFrustum(float x, float y, float z) { for(int i = 0; i < 6; i++) { if( m_Planes[i][0] * x + m_Planes[i][1] * y + m_Planes[i][2] * z + m_Planes[i][3] <= 0 ) return false; } return true; } Then i render using: camera->Update(); UpdateFrustum(); int numCulled = 0; for(int i = 0; i < (int)meshes.size(); i++) { if(!PointInFrustum(meshCenter.x, meshCenter.y, meshCenter.z)) { meshes[i]->SetDraw(false); numCulled++; } else meshes[i]->SetDraw(true); } Matrices look like (Camera is at (5, 0, 0)): ModelView [0,0,0.99,0] [0,1,0,0] [-0.99,0,0,0] [0,0,-5,1] Projection [0.814,0,0,0] [0,1.303,0,0] [0,0,-1,0] [0,0,-0.02,0] Clip [0,0,-1,-0.999] [0,1.30,0,0] [-0.814,0,0,0] [0,0,4.98,4.99] What am i doing wrong?

  Read the article

• Investigating on xVelocity (VertiPaq) column size

  - by Marco Russo (SQLBI)

    In January I published an article about how to optimize high cardinality columns in VertiPaq. In the meantime, VertiPaq has been rebranded to xVelocity: the official name is now “xVelocity in-memory analytics engine (VertiPaq)” but using xVelocity and VertiPaq when we talk about Analysis Services has the same meaning. In this post I’ll show how to investigate on columns size of an existing Tabular database so that you can find the most important columns to be optimized. A first approach can be looking in the DataDir of Analysis Services and look for the folder containing the database. Then, look for the biggest files in all subfolders and you will find the name of a file that contains the name of the most expensive column. However, this heuristic process is not very optimized. A better approach is using a DMV that provides the exact information. For example, by using the following query (open SSMS, open an MDX query on the database you are interested to and execute it) you will see all database objects sorted by used size in a descending way. SELECT * FROM $SYSTEM.DISCOVER_STORAGE_TABLE_COLUMN_SEGMENTS ORDER BY used_size DESC You can look at the first rows in order to understand what are the most expensive columns in your tabular model. The interesting data provided are: TABLE_ID: it is the name of the object – it can be also a dictionary or an index COLUMN_ID: it is the column name the object belongs to – you can also see ID_TO_POS and POS_TO_ID in case they refer to internal indexes RECORDS_COUNT: it is the number of rows in the column USED_SIZE: it is the used memory for the object By looking at the ration between USED_SIZE and RECORDS_COUNT you can understand what you can do in order to optimize your tabular model. Your options are: Remove the column. Yes, if it contains data you will never use in a query, simply remove the column from the tabular model Change granularity. If you are tracking time and you included milliseconds but seconds would be enough, round the data source column to the nearest second. If you have a floating point number but two decimals are good enough (i.e. the temperature), round the number to the nearest decimal is relevant to you. Split the column. Create two or more columns that have to be combined together in order to produce the original value. This technique is described in VertiPaq optimization article. Sort the table by that column. When you read the data source, you might consider sorting data by this column, so that the compression will be more efficient. However, this technique works better on columns that don’t have too many distinct values and you will probably move the problem to another column. Sorting data starting from the lower density columns (those with a few number of distinct values) and going to higher density columns (those with high cardinality) is the technique that provides the best compression ratio. After the optimization you should be able to reduce the used size and improve the count/size ration you measured before. If you are interested in a longer discussion about internal storage in VertiPaq and you want understand why this approach can save you space (and time), you can attend my 24 Hours of PASS session “VertiPaq Under the Hood” on March 21 at 08:00 GMT.

  Read the article

• The five steps of business intelligence adoption: where are you?

  - by Red Gate Software BI Tools Team

  When I was in Orlando and New York last month, I spoke to a lot of business intelligence users. What they told me suggested a path of BI adoption. The user’s place on the path depends on the size and sophistication of their organisation. Step 1: A company with a database of customer transactions will often want to examine particular data, like revenue and unit sales over the last period for each product and territory. To do this, they probably use simple SQL queries or stored procedures to produce data on demand. Step 2: The results from step one are saved in an Excel document, so business users can analyse them with filters or pivot tables. Alternatively, SQL Server Reporting Services (SSRS) might be used to generate a report of the SQL query for display on an intranet page. Step 3: If these queries are run frequently, or business users want to explore data from multiple sources more freely, it may become necessary to create a new database structured for analysis rather than CRUD (create, retrieve, update, and delete). For example, data from more than one system — plus external information — may be incorporated into a data warehouse. This can become ‘one source of truth’ for the business’s operational activities. The warehouse will probably have a simple ‘star’ schema, with fact tables representing the measures to be analysed (e.g. unit sales, revenue) and dimension tables defining how this data is aggregated (e.g. by time, region or product). Reports can be generated from the warehouse with Excel, SSRS or other tools. Step 4: Not too long ago, Microsoft introduced an Excel plug-in, PowerPivot, which allows users to bring larger volumes of data into Excel documents and create links between multiple tables.  These BISM Tabular documents can be created by the database owners or other expert Excel users and viewed by anyone with Excel PowerPivot. Sometimes, business users may use PowerPivot to create reports directly from the primary database, bypassing the need for a data warehouse. This can introduce problems when there are misunderstandings of the database structure or no single ‘source of truth’ for key data. Step 5: Steps three or four are often enough to satisfy business intelligence needs, especially if users are sophisticated enough to work with the warehouse in Excel or SSRS. However, sometimes the relationships between data are too complex or the queries which aggregate across periods, regions etc are too slow. In these cases, it can be necessary to formalise how the data is analysed and pre-build some of the aggregations. To do this, a business intelligence professional will typically use SQL Server Analysis Services (SSAS) to create a multidimensional model — or “cube” — that more simply represents key measures and aggregates them across specified dimensions. Step five is where our tool, SSAS Compare, becomes useful, as it helps review and deploy changes from development to production. For us at Red Gate, the primary value of SSAS Compare is to establish a dialog with BI users, so we can develop a portfolio of products that support creation and deployment across a range of report and model types. For example, PowerPivot and the new BISM Tabular model create a potential customer base for tools that extend beyond BI professionals. We’re interested in learning where people are in this story, so we’ve created a six-question survey to find out. Whether you’re at step one or step five, we’d love to know how you use BI so we can decide how to build tools that solve your problems. So if you have a sixty seconds to spare, tell us on the survey!

  Read the article

• Investigating on xVelocity (VertiPaq) column size

  - by Marco Russo (SQLBI)

    In January I published an article about how to optimize high cardinality columns in VertiPaq. In the meantime, VertiPaq has been rebranded to xVelocity: the official name is now “xVelocity in-memory analytics engine (VertiPaq)” but using xVelocity and VertiPaq when we talk about Analysis Services has the same meaning. In this post I’ll show how to investigate on columns size of an existing Tabular database so that you can find the most important columns to be optimized. A first approach can be looking in the DataDir of Analysis Services and look for the folder containing the database. Then, look for the biggest files in all subfolders and you will find the name of a file that contains the name of the most expensive column. However, this heuristic process is not very optimized. A better approach is using a DMV that provides the exact information. For example, by using the following query (open SSMS, open an MDX query on the database you are interested to and execute it) you will see all database objects sorted by used size in a descending way. SELECT * FROM $SYSTEM.DISCOVER_STORAGE_TABLE_COLUMN_SEGMENTS ORDER BY used_size DESC You can look at the first rows in order to understand what are the most expensive columns in your tabular model. The interesting data provided are: TABLE_ID: it is the name of the object – it can be also a dictionary or an index COLUMN_ID: it is the column name the object belongs to – you can also see ID_TO_POS and POS_TO_ID in case they refer to internal indexes RECORDS_COUNT: it is the number of rows in the column USED_SIZE: it is the used memory for the object By looking at the ration between USED_SIZE and RECORDS_COUNT you can understand what you can do in order to optimize your tabular model. Your options are: Remove the column. Yes, if it contains data you will never use in a query, simply remove the column from the tabular model Change granularity. If you are tracking time and you included milliseconds but seconds would be enough, round the data source column to the nearest second. If you have a floating point number but two decimals are good enough (i.e. the temperature), round the number to the nearest decimal is relevant to you. Split the column. Create two or more columns that have to be combined together in order to produce the original value. This technique is described in VertiPaq optimization article. Sort the table by that column. When you read the data source, you might consider sorting data by this column, so that the compression will be more efficient. However, this technique works better on columns that don’t have too many distinct values and you will probably move the problem to another column. Sorting data starting from the lower density columns (those with a few number of distinct values) and going to higher density columns (those with high cardinality) is the technique that provides the best compression ratio. After the optimization you should be able to reduce the used size and improve the count/size ration you measured before. If you are interested in a longer discussion about internal storage in VertiPaq and you want understand why this approach can save you space (and time), you can attend my 24 Hours of PASS session “VertiPaq Under the Hood” on March 21 at 08:00 GMT.

  Read the article

• Setting up your project

  - by ssoolsma

  Before any coding we first make sure that the project is setup correctly. (Please note, that this blog is all about how I do it, and incase i forget, i can return here and read how i used to do it. Maybe you come up with some idea’s for yourself too.) In these series we will create a minigolf scoring cart. Please note that we eventually create a fully functional application which you cannot use unless you pay me alot of money! (And i mean alot!)   1. Download and install the appropriate tools. Download the following: - TestDriven.Net (free version on the bottom of the download page) - nUnit TestDriven is a visual studio plugin for many unittest frameworks, which allows you to run  / test code very easily with a right click –> run test. nUnit is the test framework of choice, it works seamless with TestDriven.   2. Create your project Fire up visual studio and create your DataAccess project:  MidgetWidget.DataAccess is it’s name. (I choose MidgetWidget as name for the solution). Also, make sure that the MidgetWidget.DataAccess project is a c# ClassLibary Hit OK to create the solution. (in the above example the checkbox Create directory for solution is checked, because i’m pointing the location to the root of c:\development where i want MidgetWidget to be created.   3. Setup the database. You should have thought about a database when you reach this point. Let’s assume that you’ve created a database as followed: Table name: LoginKey Fields: Id (PK), KeyName (uniqueidentifier), StartDate (datetime), EndDate (datetime) Table name:  Party Fields: Id (PK), Key (uniqueidentifier, Created (datetime) Table name:  Person Fields: Id(PK),  PartyId (int), Name (varchar) Tablename: Score Fields: Id (PK), Trackid (int), PersonId (int), Strokes (int) Tablename: Track Fields: Id (PK), Name (varchar) A few things to take note about the database setup. I’ve singularized all tablenames (not “Persons“ but “Person”. This is because in a few minutes, when this is in our code, we refer to the database objects as single rows. We retrieve a single Person not a single “Persons” from the database.   4. Create the entity framework In your solution tree create a new folder and call it “DataModel”. Inside this folder: Add new item –> and choose ADO.NET Entity Data Model. Name it “Entities.edmx” and hit  “Add”. Once the edmx is added, open it (double click) and right click the white area and choose “Update model from database…". Now, point it to your database (i include sensitive data in the connectionstring) and select all the tables. After that hit “Finish” and let the entity framework do it’s code generation. Et Voila, after a few seconds you have set up your entity model. Next post we will start building the data-access! I’m off to the beach.

  Read the article

• I.T. Chargeback : Core to Cloud Computing

  - by Anand Akela

  Contributed by Mark McGill Consolidation and Virtualization have been widely adopted over the years to help deliver benefits such as increased server utilization, greater agility and lower cost to the I.T. organization. These are key enablers of cloud, but in themselves they do not provide a complete cloud solution. Building a true enterprise private cloud involves moving from an admin driven world, where the I.T. department is ultimately responsible for the provisioning of servers, databases, middleware and applications, to a world where the consumers of I.T. resources can provision their infrastructure, platforms and even complete application stacks on demand. Switching from an admin-driven provisioning model to a user-driven model creates some challenges. How do you ensure that users provisioning resources will not provision more than they need? How do you encourage users to return resources when they have finished with them so that others can use them? While chargeback has existed as a concept for many years (especially in mainframe environments), it is the move to this self-service model that has created a need for a new breed of chargeback applications for cloud. Enabling self-service without some form of chargeback is like opening a shop where all of the goods are free. A successful chargeback solution will be able to allocate the costs of shared I.T. infrastructure based on the relative consumption by the users. Doing this creates transparency between the I.T. department and the consumers of I.T. When users are able to understand how their consumption translates to cost they are much more likely to be prudent when it comes to their use of I.T. resources. This also gives them control of their I.T. costs, as moderate usage will translate to a lower charge at the end of the month. Implementing Chargeback successfully create a win-win situation for I.T. and the consumers. Chargeback can help to ensure that I.T. resources are used for activities that deliver business value. It also improves the overall utilization of I.T. infrastructure as I.T. resources that are not needed are not left running idle. Enterprise Manager 12c provides an integrated metering and chargeback solution for Enterprise Manager Targets. This solution is built on top of the rich configuration and utilization information already available in Enterprise Manager. It provides metering not just for virtual machines, but also for physical hosts, databases and middleware. Enterprise Manager 12c provides metering based on the utilization and configuration of the following types of Enterprise Manager Target: Oracle VM Host Oracle Database Oracle WebLogic Server Using Enterprise Manager Chargeback, administrators are able to create a set of Charge Plans that are used to attach prices to the various metered resources. These plans can contain fixed costs (eg. $10/month/database), configuration based costs (eg. $10/month if OS is Windows) and utilization based costs (eg. $0.05/GB of Memory/hour) The self-service user provisioning these resources is then able to view a report that details their usage and helps them understand how this usage translates into cost. Armed with this information, the user is able to determine if the resources are delivering adequate business value based on what is being charged. Figure 1: Chargeback in Self-Service Portal Enterprise Manager 12c provides a variety of additional interfaces into this data. The administrator can access summary and trending reports. Summary reports allow the administrator to drill-down through the cost center hierarchy to identify, for example, the top resource consumers across the organization. Figure 2: Charge Summary Report Trending reports can be used for I.T. planning and budgeting as they show utilization and charge trends over a period of time. Figure 3: CPU Trend Report We also provide chargeback reports through BI Publisher. This provides a way for users who do not have an Enterprise Manager login (such as Line of Business managers) to view charge and usage information. For situations where a bill needs to be produced, chargeback can be integrated with billing applications such as Oracle Billing and Revenue Management (BRM). Further information on Enterprise Manager 12c’s integrated metering and chargeback: White Paper Screenwatch Cloud Management on OTN

  Read the article

• Multiple Zend application code organisation

  - by user966936

  For the past year I have been working on a series of applications all based on the Zend framework and centered on a complex business logic that all applications must have access to even if they don't use all (easier than having multiple library folders for each application as they are all linked together with a common center). Without going into much detail about what the project is specifically about, I am looking for some input (as I am working on the project alone) on how I have "grouped" my code. I have tried to split it all up in such a way that it removes dependencies as much as possible. I'm trying to keep it as decoupled as I logically can, so in 12 months time when my time is up anyone else coming in can have no problem extending on what I have produced. Example structure: applicationStorage\ (contains all applications and associated data) applicationStorage\Applications\ (contains the applications themselves) applicationStorage\Applications\external\ (application grouping folder) (contains all external customer access applications) applicationStorage\Applications\external\site\ (main external customer access application) applicationStorage\Applications\external\site\Modules\ applicationStorage\Applications\external\site\Config\ applicationStorage\Applications\external\site\Layouts\ applicationStorage\Applications\external\site\ZendExtended\ (contains extended Zend classes specific to this application example: ZendExtended_Controller_Action extends zend_controller_Action ) applicationStorage\Applications\external\mobile\ (mobile external customer access application different workflow limited capabilities compared to full site version) applicationStorage\Applications\internal\ (application grouping folder) (contains all internal company applications) applicationStorage\Applications\internal\site\ (main internal application) applicationStorage\Applications\internal\mobile\ (mobile access has different flow and limited abilities compared to main site version) applicationStorage\Tests\ (contains PHP unit tests) applicationStorage\Library\ applicationStorage\Library\Service\ (contains all business logic, services and servicelocator; these are completely decoupled from Zend framework and rely on models' interfaces) applicationStorage\Library\Zend\ (Zend framework) applicationStorage\Library\Models\ (doesn't know services but is linked to Zend framework for DB operations; contains model interfaces and model datamappers for all business objects; examples include Iorder/IorderMapper, Iworksheet/IWorksheetMapper, Icustomer/IcustomerMapper) (Note: the Modules, Config, Layouts and ZendExtended folders are duplicated in each application folder; but i have omitted them as they are not required for my purposes.) For the library this contains all "universal" code. The Zend framework is at the heart of all applications, but I wanted my business logic to be Zend-framework-independent. All model and mapper interfaces have no public references to Zend_Db but actually wrap around it in private. So my hope is that in the future I will be able to rewrite the mappers and dbtables (containing a Models_DbTable_Abstract that extends Zend_Db_Table_Abstract) in order to decouple my business logic from the Zend framework if I want to move my business logic (services) to a non-Zend framework environment (maybe some other PHP framework). Using a serviceLocator and registering the required services within the bootstrap of each application, I can use different versions of the same service depending on the request and which application is being accessed. Example: all external applications will have a service_auth_External implementing service_auth_Interface registered. Same with internal aplications with Service_Auth_Internal implementing service_auth_Interface Service_Locator::getService('Auth'). I'm concerned I may be missing some possible problems with this. One I'm half-thinking about is a config.ini file for all externals, then a separate application config.ini overriding or adding to the global external config.ini. If anyone has any suggestions I would be greatly appreciative. I have used contextswitching for AJAX functions within the individual applications, but there is a big chance both external and internal will get web services created for them. Again, these will be separated due to authorization and different available services. \applicationstorage\Applications\internal\webservice \applicationstorage\Applications\external\webservice

  Read the article

• Register a file association with ClickOnce

  - by tinmaru

  I want to associate a file extension with my ClickOnce application. There is a File Associations part in the Publish options but I can't manage to make it work.

  Read the article

• JPA - Removing entities

  - by James P.

  I have a Story entity with the following associations: Story <1-* Chapter Story <1-* Comment Story <*-1 User What is the correct way of removing this entity and handling the all the entities that is referring to? Is there some shorthand way of specifying that associated entities must be handled automatically or is the @PreRemove annoation mentionned in the article below a valid of achieving this? http://blog.xebia.com/2009/04/09/jpa-implementation-patterns-removing-entities/

  Read the article

• When doing a Schema Export with hbm2ddl, is there a way to specify that you DO NOT want Nullable For

  - by Jon Erickson

  The DDL that is being created is putting all of my many to many associations into 1 table, but I actually want each many to many association in its' own table (for other reasons) Right now hbm2ddl is creating this table (only Table1Key OR Table2Key OR Table3Key should be filled out for any given record, causing this table to have nullable foreign keys): +-----------+ | xRef | +-----------+ | Table1Key | | Table2Key | | Table3Key | | RiskKey | +-----------+ I want hbm2ddl to create the following 3 tables so that there are no nullable foreign keys. +-----------+ +-----------+ +-----------+ | xRef1 | | xRef2 | | xRef3 | +-----------+ +-----------+ +-----------+ | Table1Key | | Table2Key | | Table3Key | | RiskKey | | RiskKey | | RiskKey | +-----------+ +-----------+ +-----------+

  Read the article

• IQueryable and lazy loading

  - by Nelson

  I'm having a hard time determining the best way to handle this... With Entity Framework (and L2S), LINQ queries return IQueryable. I have read various opinions on whether the DAL/BLL should return IQueryable, IEnumerable or IList. Assuming we go with IList, then the query is run immediately and that control is not passed on to the next layer. This makes it easier to unit test, etc. You lose the ability to refine the query at higher levels, but you could simply create another method that allows you to refine the query and still return IList. And there are many more pros/cons. So far so good. Now comes Entity Framework and lazy loading. I am using POCO objects with proxies in .NET 4/VS 2010. In the presentation layer I do: foreach (Order order in bll.GetOrders()) { foreach (OrderLine orderLine in order.OrderLines) { // Do something } } In this case, GetOrders() returns IList so it executes immediately before returning to the PL. But in the next foreach, you have lazy loading which executes multiple SQL queries as it gets all the OrderLines. So basically, the PL is running SQL queries "on demand" in the wrong layer. Is there any sensible way to avoid this? I could turn lazy loading off, but then what's the point of having this "feature" that everyone was complaining EF1 didn't have? And I'll admit it is very useful in many scenarios. So I see several options: Somehow remove all associations in the entities and add methods to return them. This goes against the default EF behavior/code generation and makes it harder to do some composite (multiple entity) LINQ queries. It seems like a step backwards. I vote no. If we have lazy loading anyway which makes it hard to unit test, then go all the way and return IQueryable. You'll have more control farther up the layers. I still don't think this is a good option because IQueryable ties you to L2S, L2E, or your own full implementation of IQueryable. Lazy loading may run queries "on demand", but doesn't tie you to any specific interface. I vote no. Turn off lazy loading. You'll have to handle your associations manually. This could be with eager loading's .Include(). I vote yes in some specific cases. Keep IList and lazy loading. I vote yes in many cases, only due to the troubles with the others. Any other options or suggestions? I haven't found an option that really convinces me.

  Read the article

• Any disadvantages to this tagging approach

  - by donpal

  I have a table of tags ID tag --- ------ 1 tagt 2 tagb 3 tagz 4 tagn In my items table, I'm using those tags in serialized format, comma delimited ID field1 tags ---- ------ ----- 1 value1 tagt,tagb 2 value2 tagb 3 value3 tagb,tagn 4 value4 When I need to find items that have this tag, I plan to deserialize the tags. But I'm not actually sure how to do it, and if it's better to have a third table for associations instead between the tags and the items.

  Read the article

• How to change filetype association in the registry?

  - by Sergio Tapia

  Hi there, first time posting in StackOverflow. :D I need my software to add a couple of things in the registry. My program will use Process.Start(@"blblabla.smc"); to launch a file, but the problem is that most likely the user will not have a program set as default application for the particular file extension. How can I add file associations to the WindowsRegistry?

  Read the article

• What is the best way to declare sorted association in grails domain classes ?

  - by fabien7474

  It seems that there are two different ways of declaring sorted associations in Grails : Method 1 (see here) using default sort order class Book { String title } class Author { static hasMany = [books : Book] static mapping = { books sort: "title"} } Method 2 (see here) using SortedSet class Book implements Comparable { String title int compareTo(obj) { title <=> obj.title } } class Author { SortedSet books static hasMany = [books : Book] } I am not sure which one to use and what is the difference (if any), pros and cons between using one against the other. I would appreciate any clarification. Thank you

  Read the article

• Can I use Linq-to-xml to persist my object state without having to use/know Xpath & XSD Syntax?

  - by Greg

  Hi, Can I use Linq-to-xml to persist my object state without having to use/know Xpath & XSD Syntax? ie. really looking for simple but flexible way to persist a graph of object data (e.g. have say 2 or 3 classes with associations) - if Linq-to-xml were as simple as saying "persist this graph to XML", and then you could also query it via Linq, or load it into memory again/change/then re-save to the xml file.

  Read the article

• [N]Hibernate: view-like fetching properties of associated class

  - by chiccodoro

  (Felt quite helpless in formulating an appropriate title...) In my C# app I display a list of "A" objects, along with some properties of their associated "B" objects and properties of B's associated "C" objects: A.Name B.Name B.SomeValue C.Name Foo Bar 123 HelloWorld Bar Hello 432 World ... To clarify: A has an FK to B, B has an FK to C. (Such as, e.g. BankAccount - Person - Company). I have tried two approaches to load these properties from the database (using NHibernate): A fast approach and a clean approach. My eventual question is how to do a fast & clean approach. Fast approach: Define a view in the database which joins A, B, C and provides all these fields. In the A class, define properties "BName", "BSomeValue", "CName" Define a hibernate mapping between A and the View, whereas the needed B and C properties are mapped with update="false" insert="false" and do actually stem from B and C tables, but Hibernate is not aware of that since it uses the view. This way, the listing only loads one object per "A" record, which is quite fast. If the code tries to access the actual associated property, "A.B", I issue another HQL query to get B, set the property and update the faked BName and BSomeValue properties as well. Clean approach: There is no view. Class A is mapped to table A, B to B, C to C. When loading the list of A, I do a double left-join-fetch to get B and C as well: from A a left join fetch a.B left join fetch a.B.C B.Name, B.SomeValue and C.Name are accessed through the eagerly loaded associations. The disadvantage of this approach is that it gets slower and takes more memory, since it needs to created and map 3 objects per "A" record: An A, B, and C object each. Fast and clean approach: I feel somehow uncomfortable using a database view that hides a join and treat that in NHibernate as if it was a table. So I would like to do something like: Have no views in the database. Declare properties "BName", "BSomeValue", "CName" in class "A". Define the mapping for A such that NHibernate fetches A and these properties together using a join SQL query as a database view would do. The mapping should still allow for defining lazy many-to-one associations for getting A.B.C My questions: Is this possible? Is it [un]artful? Is there a better way?

  Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >