Search Results

Search found 6018 results on 241 pages for 'terminal emulator'.

Page 185/241 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

• Asus Eee PC 1000HE wireless woes

  - by Vladimir Noobokov

  Ever since I have upgraded my Asus Eee PC 1000HE from Lucid 10.04 to Precise 12.04 I have been having issues with my wireless connections. At first I had wireless dropouts: I would be able to start using wireless, but then after a few minutes the wireless would stop working even though I was still connected to the network. Lately things turned worse: while I connect to my wireless network, it just never works. I tried all sorts of solutions on offer here and in other forums but none worked. At best I got the wireless to work up until I rebooted, at which point I would get the same symptoms again: the wireless network is there, but it's not really working. By now I tried so many different "solutions" I don't know where to start describing them; I have also reinstalled 12.04 several times, enough to make me lose faith in Ubuntu. Help here looks like my last resort. For the record, my Asus Eee PC 1000HE is equipped with an Atheros wireless card. I have reinstalled 12.04, ran all the suggested updates, and receive the following response when I type iwconfig in the terminal: lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Arsenal" Mode:Managed Frequency:2.452 GHz Access Point: 00:04:ED:48:67:89 Bit Rate=1 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-29 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:27 Invalid misc:57 Missed beacon:0 eth0 no wireless extensions. Thanks in advance for any help that might be offered.

  Read the article

• VHOST not working in Apache

  - by Starx

  I got a LAMP server working in Ubuntu 11.04. Now the problem is that the websites have to enabled and disabled from the terminal. All all of them have to be accessed from http://localhost which is not so much efficient. So I created a VHOSTS, using some tutorials off the net. Here is the coding for it <VirtualHost *:80> ServerAdmin webmaster@localhost Servername site.com ServerAlias www.site.com DocumentRoot /home/starx/public_html/site/public <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/starx/public_html/site/public> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> nGen ErrorLog ${APACHE_LOG_DIR}/site-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/site-access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> Now, still I can't access the page in http://site.com but if i access using http://localhsot/ it is accessed. I have disabled all others site including default and have just enabled one site i.e. site How to fix this?

  Read the article

• VirtualBox error 0x80004005

  - by maria

  Hi I was trying to run Windows XP under Virtual Box (host system Ubuntu 10.04) and I've got an error message saying: Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Re-setup the kernel module by executing '/etc/init.d/vboxdrv setup' as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. This is terminal output: maria@maria-laptop:~$ sudo /etc/init.d/vboxdrv setup * Stopping VirtualBox kernel modules * done. * Uninstalling old VirtualBox DKMS kernel modules * done. * Trying to register the VirtualBox kernel modules using DKMS * Failed, trying without DKMS * Recompiling VirtualBox kernel modules * done. * Starting VirtualBox kernel modules * done. After that I can run XP on Virtual Box, but when I try to log into user's account, I have the message that I have to register XP (I haven't done it yet, as each time I was cliking on pop-up window suggesting registration, nothing was happening). I click that I want to register it now and appears the message about error 0x80004005, which prevents Windows to check the license for that computer (the message is in Polish, so I don't post it here...). I forgot to install DKMS first, but I've done it after. What should I do to run virtual machine? It was using it already, the problem occured only today. Thanks for any suggestion

  Read the article

• Banshee music file copy to Mac iPhone 4s ios5.1 not permanent

  - by user95736

  In Ubuntu 12.04 - When I drag .mp3 files from Banshee 2.6 to my Mac-formatted iPhone 4s ios5.1: a. Banshee says it's syncing with the phone, updating the media database, and the filecount on the phone is incremented; b. The files show up under the device in Banshee and I can play them; c. I can see them on the iPhone in a file browser; d. I can navigate to the iPhone filesystem in a terminal and create a file, so I know I have write permissions. When I disconnect the device in Banshee, it again tells me it's syncing the phone and updating the media database, but I can't find the songs on the phone in iTunes - they are not there when I reconnect the phone to my computer. Am I just being deceived by gvfs? I haven't been able to find a recent post indicating the status of syncing ios5.x devices with Banshee, RhythmBox, etc... Can someone tell me if this should work? Also, I wonder if my iPhone needs to be formatted/initialized by iTunes for Windows, since it has been managed on a Mac? I solved a syncing problem with an older ipod classic which had been managed by iTunes on a Mac, by re-initializing it under iTunes for Windows - perhaps an hfs+ issue. Thanks for any help.

  Read the article

• SD Card Reader not working in Ubuntu 12.04

  - by tripkane

  I have a read many other posts on this issue and believe that Ubuntu 12.04 is not even recognizing my SD Card Reader as just that: Computer Model: Metabox (Australian builder of Clevo laptops) / Clevo P150EM OS: Ubuntu 12.04 (64 Bit) CPU: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz HD: 120GB Intel 550/520MB/s SSD According to the people who built my computer, the specs of the SD Card reader in my comp are as follows: Manufacture: Realtek Semiconduct Corp. Location: PCI bus 3 Hardware ID: PCI\Ven_10EC&DEV_5289&SUBSYS_51051558 Physical device object name: \Device\NTPNP_PCI0015 Here are the relevant outputs of the following commands run from the terminal: sudo lshw *-generic UNCLAIMED description: Unassigned class product: Realtek Semiconductor Co., Ltd. vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list configuration: latency=0 resources: memory:f6a00000-f6a0ffff sudo lspci -v -nn 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5289] (rev 01) Subsystem: CLEVO/KAPOK Computer Device [1558:5105] Flags: bus master, fast devsel, latency 0, IRQ 4 Memory at f6a00000 (32-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [b0] MSI-X: Enable- Count=1 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00 Does the unassigned details of these outputs mean that Ubunutu desn't know that the SD Card Reader is one and what do with it? and if so how should I go about fixing it?? Cheers ;)

  Read the article

• Compiz not drawing window controls in ubuntu 11.10

  - by Siva Prasad Varma

  I have recently installed driver for my ATI graphic card in my Dell Studio laptop. I have also read this somewhere on the web that Ubuntu enables compiz window manager by default if your hardware can run it. Is it true ? In my case before Installing graphic card driver the window manager was Metacity, but now I have compiz as my Window manager. I found this out uisng Displex Indicator applet also confirmed by wmctrl -m. From the time I have installed graphic card drivers, the window manager(Compiz) is not drawing window control buttons for some of the windows. For example if I open a terminal I have to close it using key board shortcuts or use the File - Quit option in app-menu. Also I am not able to move the window because of this. From then when-ever I find a window without window control buttons I am restarting the window manager using Displex Indicator applet. But this is very annoying and also consumes a lot of time(when I am doing my work). Can any one suggest any solution for this. What are up's and down's of using Compiz Vs Metacity.

  Read the article

• Ubuntu 12.04 LTS loops the login screen unless you login as Guest

  - by Mário Silva

  I am running a VMWare Player with a Ubuntu 12.04 LTS Precise Pangloin as Guest on my Windows 7. Sometimes I get the shutdown blue screen error in Windows, this time it happened when I was running the Player. When I restarted everything Ubuntu gave the not so unfamiliar in this forum Login Loop in adminstrator login. I login and there's this black screen where I can only read: "piix4...smbus:0.0.0.07.3 Host Smbus controller not enabled" . When I go to the Prompt in root mode it fails to update and only upgraded, specially some plugins ( I think graphic plugins) which also appear in one an error message after quitting the prompt, but they´are successfully installed. They are not the error message. After that I have been working with the Fail/safe Mode recovery panel. When I try to update via Root I get errors like this: W:failed to fetch http://extras.ubuntu.com/ubuntu/dists/precise/release.gpg could not resolve 'extras/ubuntu.com There are 8 more like this referring to areas like: -archive/canonical.com -ppa.Launchpad.net -security.Ubuntu.com -Us.archive.ubuntu.com - release.gpg precise-updates/release.gpg precise_backport/release.gpg Final Message: some index files failed to download.....they have been ignored or old files are used. The black screens most of the time pass by too fast for me to pick up any information. But in general I think I have done everything I was able to in the recovery panel including updating network and graphic packages and recovering filesystem packages and the basic stuff ( I am a beginner regarding Linux ) in the root prompt. Now I am stuck in this screen with graphic options: - Run in low-graphics mode just for one session - Reconfigure Graphics - Troubleshoot the error - Exit to console login I am trying to choose to reconfigure graphics but the mouse disappears in the virtual machine screen and sometimes when options change ity´s only the first and last option. ut this happens from the blue without messages. This particular option menu is in the regular GUI style against a black screen in Terminal style. Really strange. Thanx in advance, all is welcome and appreciated.

  Read the article

• Ubuntu Server 13.10 can't mount hard drive that is on my router

  - by Keytachi626

  So I am working currently with my Ubuntu server which I have it on my laptop at the moment so I can test out how to work with the server OS. I have it up and running with samba, openSSH, webmin, and plexmedia server. My problem is that I can't seem to get the server to get to the router hard drive. I have a TP-link wdr3500. The format of the hard drive is a FAT32. What I've tried: install cifs. sudo vi /etc/fstab Type out \\ \tplinklogin.net\volume1 \mnt\media cifs guest 0 0 I have also tried out \\\192.168.0.1\volume1 \mnt\media cifs guest 0 0 But then when I go to terminal and do sudo mount -a, I usually get a error saying wrong fs type, bad option, bad superblock on //ipaddress/dns/volume1 , missing codepage or helper program, or other error. But in dmesg it will say unable to determine destination address. So am I doing something wrong here? I can't install the hard drive on to my laptop since my family is constantly using it to transfer data back and forth on it and they get mad at me if I just take it away.

  Read the article

• Google earth will not reinstall

  - by chad

  I was trying to perform the the fix found at this link http://www.omgubuntu.co.uk/2012/01/how-to-make-google-earth-look-native-in-ubuntu It requires you to delete certain files from the /opt/google/earth/free folder and then add some new ones that you download. I deleted the files but the links to download the new ones were unusable. I was using gksudo nautilus so trash was disabled meaning I could not restore the files I had deleted. I the tried to go to the Google Earth website and reinstall it. I downloaded the .deb but when I tried to install it it gav me an error message saying "cannot install ia32-libs" I tried installing this via terminal and it gave me an error message saying chad@chad-Lenovo-G570:~$ sudo apt-get install ia32-libs [sudo] password for chad: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: ia32-libs : Depends: ia32-libs-multiarch E: Unable to correct problems, you have held broken packages. How do I fix this? Now I am stuck without a functioning Google Earth. How can I fix this?

  Read the article

• Acer aspire one d270 can not set brightness

  - by Marko

  I hope you can help me figure out how to set the brightness at my netbook. Following problem appears since I installed ubuntu 11.10 on my acer: I am not able to adjust the brightness by FN Keys nor manually at "systemsettings-display". After searching with google for a while, I found a way via the terminal to adjust it with the folloqing command: "sudo setpci -s 00:02.0 f4.b=7f" ( from 00-9f). That was a major breakthrough for me as I am still new to Linux OS. But still seeking a way to get the FN keys for brightness to work, I kept searching until I found "askubuntu.com". I read through various Questions by other acer users and tried there solutions, but unfortunately none worked out for me. From this thread: fn + arrow keys don't adjust actual brightness on an Acer Aspire 5740 "sudo gedit /etc/X11/xorg.conf". This command did not work because the file was not found. I also used nano instead of gedit, but the file was empty( I think it just created the file since it did not exist). These commands which i found gave me a boot loop and I had to repair ubuntu: sudo gedit /etc/default/grub Change the line GRUB_CMDLINE_LINUX="" into GRUB_CMDLINE_LINUX="acpi_osi=Linux" sudo update-grub From this post Screen Brightness not adjustable for Acer Aspire S3: I tried the solution from the last post, but it did not work either. Does anyone know what I could try? I would appreciate it, if someone could help me out with this. Thanks in advance Netbook specs: CPU: Intel Atom N2600 Memory: 2gb DDR3 Storage: 320 GB HD GPU: Intel GMA 3600

  Read the article

• Xubuntu 12.04 : Random boot to black screen

  - by Thibaud Ruelle

  My xubuntu 12.04 has worked flawlessly since install in September. However, lately I randomly have the following boot issue : The computer boots to grub, and after choosing xubuntu either boots normally or boots to a black screen. Here are some observations I have made : The black screen seems to happen randomly. The black screen does not seem to happen in safe mode (- nomodeset in grub). The black screen does not allow me to ctrl + alt + F1-6 into a terminal. The black screen allows me to use SysRq keys (Alt + SysRq + K does not work though). The black screen often happens on first boot in several hours and the computer usually boots normally after a RSEINUB. When the computer boots I get "SP5100 TCO timer: mmio address 0xfec000f0 already in use" at startup and "Could not write bytes: broken pipe" at shutdown. However research on these errors did not yield answers to my particular issue. Comparing Xorg.0.log (successful boot) and Xorg.0.log.old (black screen), and reading the answers to similar problem, it seems that I might have a X driver issue. However the system worked flawlessly since lately. Additional info on my system : ACER AO722 C62kk Operating system : 3.2.0-31-generic ubuntu Edit : I made a fresh install of Xubuntu 12.04 x64, the issue is still there ... (I have a separate /home so config. files were not erased). Edit 2 : I followed troubleshooting blank screen, so my new observations are without quiet and splash in grub : When the system boots normally, the screen goes black after grub then lights up and displays text information then goes to login screen. (After that the desktop starting time vary substantially, which is new and may be a separate issue ?). When the boot fails, after grub the screen goes black, lights up, goes black, lights up again and most times goes black again. At this point it responds to Alt+SysReq K by lighting up but no more, and has to be rebooted through Alt+SysReq+ RSEINUB. Thank you for your time and attention in advance ! Thibaud Ruelle

  Read the article

• NCurses, scrolling of multiline items, "current item" pointer and "selected items"

  - by mjf

  I am looking for hints/ideas for the best (most effective) way on how to scroll multi-line items as well as emphasizing of the "current item" and "selected items" such as: 1 FOO ITEM 1 Foo sub-item 2 Foo sub-item 3 Foo sub-item 2 BAR ITEM 1 Bar sub-item 3 BAZ ITEM 1 Baz sub-item 2 Baz sub-item 4 RAB ITEM 5 ZZZ ITEM 1 Zzz sub-item 2 Zzz sub-item 3 Zzz sub-item 4 Zzz sub-item using NCurses (some combination of windows, sub-windows, pads, copywin? Uff! In fact, the lines could exceed the stdscr's width so that possibility to scroll left/right would be also nice - pads?)... The whole items (including the sub-items) are supposed to be emphasized as full-width window/pad areas. The "current item" (including it's set of lines) should be emphasized (i.e. using A_BOLD), selected set of items of choice (including the set of lines for each the selected item) should be emphasized in another way (i.e. using A_REVERSE). What would you choose to cope with it the most effective NCurses way? (The less redrawals/refreshes the better and terminal is supposed to have the ability to change it's size - such as XTerm running under "floating window" management.) Thank you for your ideas (or perhaps some piece of code where something similar is already solved - I was not able to find anything helpful on the Internet. I mean I am not going to copy/paste foreign code but programming NCurses properly is still somehow difficult to me). P.S.: Would you suggest to "smooth-scroll" +1/-1 screen line or rather "jump-scroll" +lines/-lines of the items? (I personally prefer the latter one.) Sincerely, -- mjf

  Read the article

• Pen drive cannot be mounted

  - by DUKE

  I get the following message when I insert my pen drive to USB port. I am unable to format it as well. (This pen drive earlier used as a bootable drive for Ubuntu 12.04) I am using Ubuntu 12.04 LTS. lsusb command in the terminal gives the following message: siva@siva:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0424:2513 Standard Microsystems Corp. Bus 002 Device 002: ID 0424:2513 Standard Microsystems Corp. Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 001 Device 004: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory Bus 002 Device 003: ID 05ac:8242 Apple, Inc. IR Receiver [built-in] Bus 002 Device 004: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 001 Device 007: ID 05ac:8281 Apple, Inc. Bus 001 Device 008: ID 0951:1653 Kingston Technology

  Read the article

• Plymouth package broken... Can I safely remove it? Other solution to repare it?

  - by Julien Gorenflot

  I have a broken package... So far nothing horrible. The problem is that it is Plymouth, and it seems that if I remove it, I will remove half of the packages of my system... So here is my question: if I actually remove, or even purge plymouth; will I at least have a terminal left after it to reinstall it? Or am I definitely doomed? Just to illustrate what I say; here is the result of an apt-get --reinstall install plymouth: julien@julien-desktop:~$ sudo apt-get --reinstall install plymouth Reading package lists... Done Building dependency tree Reading state information... Done Reinstallation of plymouth is not possible, it cannot be downloaded. You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: plymouth : Depends: libdrm-nouveau1 (>= 2.4.11-1ubuntu1~) but it is not installable Recommends: plymouth-themes-all but it is not installable E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). or an apt-get -f install (well basically it is the same) julien@julien-desktop:~$ sudo apt-get -f install [sudo] password for julien: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... failed. The following packages have unmet dependencies: plymouth : Depends: libdrm-nouveau1 (>= 2.4.11-1ubuntu1~) but it is not installable Recommends: plymouth-themes-all but it is not installable E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. E: Unable to correct dependencies julien@julien-desktop:~$ Any idea would be very welcome...

  Read the article

• Flash removal and installation issue

  - by Theo

  I'm having this issue trying to uninstall and/or upgrade the Adobe flash player plug-in. Here's what I've ran through the terminal: $ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: linux-headers-3.0.0-13-generic libgladeui-1-11 linux-headers-3.0.0-19-generic linux-headers-3.0.0-13 linux-headers-3.0.0-19 erlang-base Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: adobe-flashplugin 0 upgraded, 0 newly installed, 1 to remove and 2 not upgraded. 1 not fully installed or removed. After this operation, 10.2 MB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 375840 files and directories currently installed.) Removing adobe-flashplugin ... update-alternatives: error: no alternatives for iceape-flashplugin. update-alternatives: error: no alternatives for iceape-flashplugin. dpkg: error processing adobe-flashplugin (--remove): subprocess installed pre-removal script returned error exit status 2 No apport report written because MaxReports is reached already postinst called with argument `abort-remove' dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: adobe-flashplugin E: Sub-process /usr/bin/dpkg returned an error code (1) Please advise if you can. Let me know if there is any other info you need.

  Read the article

• DSL connection not working in 10.04

  - by Mussnoon

  I use a wired PPPoE connection to connect to the Internet. What I need to do on Windows to connect to it is put in static IP address, gateway, subnet mask and DNS servers for my LAN card. Next I have to create a dialer for a PPPoE connection, put in my user name, the service name and the password, and "dial" this connection. And it works fine. On Ubuntu 10.04, however, I have tried setting things up in a similar fashion - put in all static addresses for the "automatic" wired connection, then put in user name, service name, password for a "DSL" connection. It worked for a while, then stopped. I have tried putting in all the details within the DSL configuration dialog, same thing happened - it worked for a while, then stopped. I have tried deleting the ethernet connection and only keeping the DSL one with all the numbers put in place, same thing happened - it worked for a while, then stopped. Each of the times, when it connected, it connected randomly, after trying a few times, and either stopped working within a few minutes, or after I had rebooted. I have deleted and remade the connection dozens of times - even with different names, but nothing seems to be working. I have also tried pppoeconf from the terminal, didn't work. I have checked /var/log/kern.log, but nothing changes in the file when I try to connect. I have also checked /sbin/route, but gedit can't even open it (says it can't figure the character encoding...). The "connection established" notification pops up from the top right corner, the same way as when the computer is actually connected to a network. Can anyone figure what's wrong and how it can be solved?

  Read the article

• How can i fix some broken packages PyQt packages?

  - by Jorge

  I'm trying to install PyQt but i've met some difficulties (i.e packages that won't be updated and stuff like that). I'm not very proficient with Ubuntu, so some help is needed. Here's the output i get from the terminal: sudo apt-get install python-qt4 Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: python-qt4 : Depends: libqt4-declarative (>= 4:4.7.0~rc1) but it is not going to be installed Depends: libqt4-designer (>= 4:4.7.0) but it is not going to be installed Depends: libqt4-help (>= 4:4.7.0) but it is not going to be installed Depends: libqt4-script (>= 4:4.7.0) but it is not going to be installed Depends: libqt4-scripttools (>= 4:4.7.0) but it is not going to be installed Depends: libqt4-svg (>= 4:4.7.0) but it is not going to be installed Depends: libqt4-test (>= 4:4.7.0) but it is not going to be installed Depends: libqt4-xmlpatterns (>= 4:4.7.0) but it is not going to be installed E: Broken packages

  Read the article

• Macbook Pro 13" Retina (10,2): Keyboard and Touchpad don't work

  - by Dirk

  I'm dealing with Ubuntu since about 5 years and installed it on several laptops. Now I'm stuck when trying to install Ubuntu 12.04.1 on a brand new Macbook Pro 13" Retina (10,2). I sucessfully can start Ubuntu from an USB stick, the Ubuntu desktop is visible, a mouse cursor is visible. But there is no respond to keyboard or touchpad input. So I cannot really install Ubuntu on the Macbook. The details of my approach: Prepare an empty USB stick Download "ISO 2 USB EFI Booter for Mac" and copy the file bootX64.efi to the USB drive as /efi/boot/bootX64.efi. Download Ubuntu 12.04.1 Desktop for Mac from http://cdimage.ubuntu.com/releases/1-amd64+mac.iso and copy the iso the USB drive as /efi/boot/boot.iso Put the USB stick into the Macbook Press and hold the "alt" button while switching the Macbook on Select "EFI Boot" from the boot menu that appears and press the Return / Enter key Immediately a black terminal screen appears with the headline "Welcome to the Ubuntu ISO << - EFI booter". 30 seconds later the familiar Ubuntu startup graphics screen is showing. Further 20 seconds later Ubuntu has started and the desktop is visible - in wonderfully fine resolution Now the computer does not respond to any actions on the touchpad nor the keyboard Who did install Ubuntu on this Macbook Pro 13" Retina (10,2) successfully? On this site https://help.ubuntu.com/community/MacBookPro this unit is not listed yet, anyway. Any help would be greatly appreciated! Dirk

  Read the article

• xorg, nvidia, log-in all hosed - how can I completely reset graphics set-up/settings?

  - by Fred Hamilton

  I just did a fresh install of Mythbuntu 12.04.1 on my Intel MB with nVidia 9500GT graphics card. Hardware's been working great with 10.10 for about 2 years. Background: (optional - feel free to skip to question) I was trying to get my component video output to generate 720p, messing around with the nvidia drivers, and now the entire display system is hosed. I can SSH in and get a terminal. Depending on which nvidia package I install/remove, I get: Garbage on screen (after I "apt-get remove nvidia*") A low-res graphical log-in screen where I can log in as fred or guest. If I log in as fred, it displays some text mode status line then goes right back to the log-in screen. If I log in as guest, I actually get the full Ubuntu desktop, but I need to be able to log in as fred. Other times I get an error: "API mismatch: the NVIDIA kernel module has version 304.43, but this NVIDIA driver component has version 295.49." I've googled around, including trying this thread with the same error message, but to no effect. Question: How can I just reset x settings, drivers, everything display-related to the exact same way it was after a fresh install?

  Read the article

• Trying to install Canon iP7250 printer

  - by Chris Burmajster

  I'm trying to install my Canon iP7250 printer on a fresh install of 13:10 64bit. Last time I installed it successfully via http://handytutorial.com/install-canon-printer-driver-for-ubuntu-13-04-12-10-12-04 which entailed adding a repository via the terminal and then updating it. I then opened Synaptic and searched for my printer model and Synaptic then installed everything. This time round I added the repositories but the update failed with the following error: Failed to fetch http://ppa.launchpad.net/michael-gru...amd64/Packages 404 Not Found Failed to fetch http://ppa.launchpad.net/michael-gru...-i386/Packages 404 Not Found Some index files failed to download. They have been ignored, or old ones used instead. An internet search failed to find another way of installing this printer so I'm stuck. My laptop also runs 64 bit 13:10 and the printer works, as I installed it months ago. Is there any way I can take something off that to use on this new machine? Thank you all in advance P.S. I have just found and downloaded the official Canon driver from the Canon website and extracted it, but I don't know how to install it.

  Read the article

• basic beginning emacs questions - install latest version and pick appropriate UI

  - by MountainX

  I'm running the latest Kubuntu (12.04 beta 2) and I would like to run the latest emacs (currently v24). The repos are one version behind. What's the best way to install v24 or later (and avoid future version conflicts)? Also, is there any reason not to aways use the GUI version of emacs if X is running? For example, could I set the GUI emacs version as the default text editor and use it to edit cron jobs (crontab -e)? I'm assuming the answer is yes, but since I haven't done that yet (my default editor is nano), I want to check if there are reasons I should leave nano as the default editor. Usually when I'm working on the command line I end up using nano. Now that I think about it, I have no idea why I keep doing that. Is there any downside to calling a GUI editor when working in an X terminal? EDIT: I briefly tested these two versions GNU Emacs 24.0.94.1 (x86_64-pc-linux-gnu, GTK+ Version 3.3.20) from GNU Emacs 23.3.1 (x86_64-pc-linux-gnu) installed by default in Kubuntu. This post explains some of the differences between versions. Unfortunately (for me) the defaults installed version (23.3.1, 23.3+1-1ubuntu9) is the nox version. Package: emacs23-nox Status: install ok installed Version: 23.3+1-1ubuntu9 Replaces: emacs23, emacs23-gtk, emacs23-lucid The package with version 24 opens in GUI mode by default. That's what I prefer. Some of the version 24 changes that interest me are listed in the references below. But there appear to be a multitude of different packages and versions I could install. References: What’s New In Emacs 24 (part 1) | Mastering Emacs http://www.masteringemacs.org/articles/2011/12/06/what-is-new-in-emacs-24-part-1/ " shell-mode uses pcomplete rules, with the standard completion UI. Yowzah! There’s a lot of cool, new functionality hidden away in this gem of a change." EmacsWiki: Recent Changes http://www.emacswiki.org/emacs/?action=rc;showedit=0

  Read the article

• Install Adobe AIR on Ubuntu/Linux

  Since quite some time Adobe Technologies released the Linux version of Adobe AIR to bring web applications and widgets to your desktop. Installing new applications on a Linux system is not always as easy as switching the computer on. The following instructions might be helpful to install Adobe AIR on any Linux system. First of all, get the latest installer of Adobe AIR from http://get.adobe.com/air/ - as of writing this article the file name is AdobeAIRInstaller.bin. Save the download in your preferred folder. Now, there are two ways to run the installer - visual style or console style. Visual Installation Launch your favorite or standard file manager like thunar or nautilus and browse to the folder where the AdobeAIRInstaller.bin has been saved. Right click on the file and choose 'Properties' in the context menu Set 'Execute' permissions and confirm modifications with OK Rename file into AdobeAIRInstaller Double click and follow the instructions Using the console Open a terminal like xterm Change into the directory where you stored the download Run this command:[code]chmod +x AdobeAIRInstaller.bin[/code] Now run this command:[code]sudo ./AdobeAIRInstaller.bin[/code] The normal installer will open, install it. From now whenever you download a .air file, just double click it and it will be installed. Troubleshooting In case that the installation does not start properly, try to install via console. This gives you more details about the reasons. Should you run into something like this: [code]AdobeAIRInstaller.bin: 1: Syntax error: "(" unexpected[/code] Double check the execute permission of the installer file and try again.

  Read the article

• How to fix sudo: setreuid(ROOT_UID, user_uid): Operation not permitted error?

  - by David R.

  I am using LDAP authentication on my Ubuntu 11.10 server. I installed libpam-ldap, and configured things accordingly. It works great, except that I get this error every once in a while when I try to sudo: sudo: setreuid(ROOT_UID, user_uid): Operation not permitted I know I have sudoers set up correctly, since it works most of the time. It's not just my log in either, others have the same problem when I have it. When this error is occurring, I can't ssh in with my regular system user at all. When I sign in directly, I can't get any gnome-terminal to start. Once I restart the server, the problem goes away. 'Course, that's not a solution, if it was a prod server, I'd be in trouble. How do I fix this? Edit 3/1/12: I just figured out that if stop and start the nscd service, the problem goes away. service nscd stop service nscd start Not much of a solution since I have to be logged into the server directly, not via ssh.

  Read the article

• Cannot log in to the desktop on ubuntu 11.10?

  - by Jichao

  The problem is, I could log in under the terminal, i could ifup eth0, i could do anything I want in the terminal, but if I use ctrl+alt+f7 goto the gnome login screen, after I input the correct password, the system just send me back to same login screen again. I have created a new user, but it didn't work. I have change all the files under ~/ to jichao:jichao(which is my username) with chown -hR jichao:jichao /home/jichao, but it didn't work too. I searched the internet, somebody said I should see the logs under /var/log/gdm, but there is not a /var/log/gdm directory in my box. Here are the tail of files under /var/log/ tail X.org.log [ 3263.348] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 3263.348] (**) Dell Dell USB Keyboard: always reports core events [ 3263.348] (**) Dell Dell USB Keyboard: Device: "/dev/input/event5" [ 3263.348] (--) Dell Dell USB Keyboard: Found keys [ 3263.348] (II) Dell Dell USB Keyboard: Configuring as keyboard [ 3263.348] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29/event5" [ 3263.348] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD) [ 3263.348] (**) Option "xkb_rules" "evdev" [ 3263.348] (**) Option "xkb_model" "pc105" [ 3263.348] (**) Option "xkb_layout" "us" kern.log Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701247] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input27 Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701392] generic-usb 0003:413C:2003.0018: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.642572] usb 2-1.3: new low speed USB device number 17 using ehci_hcd Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 syslog Mar 20 09:33:02 jichao-MS-730 mtp-probe: bus: 2, device: 17 was not an MTP device Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 mtp-probe: checking bus 2, device 18: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4" Mar 20 09:34:08 jichao-MS-730 mtp-probe: bus: 2, device: 18 was not an MTP device Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 auth.log Mar 20 09:18:52 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:18:53 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:18:53 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.240" (uid=104 pid=6457 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") Mar 20 09:19:38 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jicha Mar 20 09:19:39 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jichao Mar 20 09:20:10 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session closed for user lightdm Mar 20 09:20:11 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session opened for user lightdm by (uid=0) Mar 20 09:20:11 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:20:12 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:20:12 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.247" (uid=104 pid=6572 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") It seems that my .xsession-errors does not grow since yesterday. Here is my .xsession-error: (gnome-settings-daemon:1550): Gdk-WARNING **: The program 'gnome-settings-daemon' received an X Window System error. This probably reflects a bug in the program. The error was 'BadWindow (invalid Window parameter)'. (Details: serial 26702 error_code 3 request_code 2 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, /usr/share/system-config-printer/applet.py:336: GtkWarning: ??????????????:“pixmap”, self.loop.run () (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, common-plugin-Message: checking whether we have a device for 4: yes common-plugin-Message: checking whether we have a device for 5: yes common-plugin-Message: checking whether we have a device for 6: yes common-plugin-Message: checking whether we have a device for 7: yes common-plugin-Message: checking whether we have a device for 10: yes common-plugin-Message: checking whether we have a device for 8: yes common-plugin-Message: checking whether we have a device for 9: yes (gnome-settings-daemon:13791): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed [1331983727,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application ** (gnome-fallback-mount-helper:1584): DEBUG: ConsoleKit session is active 0 (gnome-fallback-mount-helper:1584): Gdk-WARNING **: gnome-fallback-mount-helper: Fatal IO error 11 (???????) on X server :0. (gdu-notification-daemon:1708): Gdk-WARNING **: gdu-notification-daemon: Fatal IO error 11 (???????) on X server :0. unity-window-decorator: Fatal IO error 11 (???????) on X server :0.0. (bluetooth-applet:1583): Gdk-WARNING **: bluetooth-applet: Fatal IO error 11 (???????) on X server :0. (nm-applet:1596): Gdk-WARNING **: nm-applet: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): IBUS-WARNING **: _connection_closed_cb: Underlying GIOStream returned 0 bytes on an async read (update-notifier:1821): Gdk-WARNING **: update-notifier: Fatal IO error 11 (???????) on X server :0. applet.py: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): Gdk-WARNING **: nautilus: Fatal IO error 11 (???????) on X server :0. Could you help me, Thanks.

  Read the article

• Can not access Internet (DNS names do not resolve) after update today

  - by Aras

  I have been using Precise for a few weeks now for work with no problem. Today, I am not able to access any website using either wired or wireless connections. I installed the updates today which included nautilus, xserver, and a new kernel (3.2.0-24). After restarting I no longer was able to browse the Internet using firefox or chrome. Trying to ping google in terminal gives ping: unknown host google.ca I have tried: Connecting to wireless or wired networks (both working on other machines) Restart the machine and boot with previous Kernel Manually configure opendns on my wired connection Restart the network and the laptop and the wireless card Without any success so far. I am not sure where to go next. Please let me know the cause of the issue or help me troubleshoot it. Note that the laptop does receive an ip address, and it can ping ip address of google.ca (74.125.127.94) but not the domain name, or any domain name for that matter. This system was upgraded from 11.10 to 12.04 more two weeks ago.

  Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >