necessary - Page 186 - Developer IT

Big Data – Buzz Words: What is HDFS – Day 8 of 21

- by Pinal Dave

In yesterday’s blog post we learned what is MapReduce. In this article we will take a quick look at one of the four most important buzz words which goes around Big Data – HDFS. What is HDFS ? HDFS stands for Hadoop Distributed File System and it is a primary storage system used by Hadoop. It provides high performance access to data across Hadoop clusters. It is usually deployed on low-cost commodity hardware. In commodity hardware deployment server failures are very common. Due to the same reason HDFS is built to have high fault tolerance. The data transfer rate between compute nodes in HDFS is very high, which leads to reduced risk of failure. HDFS creates smaller pieces of the big data and distributes it on different nodes. It also copies each smaller piece to multiple times on different nodes. Hence when any node with the data crashes the system is automatically able to use the data from a different node and continue the process. This is the key feature of the HDFS system. Architecture of HDFS The architecture of the HDFS is master/slave architecture. An HDFS cluster always consists of single NameNode. This single NameNode is a master server and it manages the file system as well regulates access to various files. In additional to NameNode there are multiple DataNodes. There is always one DataNode for each data server. In HDFS a big file is split into one or more blocks and those blocks are stored in a set of DataNodes. The primary task of the NameNode is to open, close or rename files and directory and regulate access to the file system, whereas the primary task of the DataNode is read and write to the file systems. DataNode is also responsible for the creation, deletion or replication of the data based on the instruction from NameNode. In reality, NameNode and DataNode are software designed to run on commodity machine build in Java language. Visual Representation of HDFS Architecture Let us understand how HDFS works with the help of the diagram. Client APP or HDFS Client connects to NameSpace as well as DataNode. Client App access to the DataNode is regulated by NameSpace Node. NameSpace Node allows Client App to connect to the DataNode based by allowing the connection to the DataNode directly. A big data file is divided into multiple data blocks (let us assume that those data chunks are A,B,C and D. Client App will later on write data blocks directly to the DataNode. Client App does not have to directly write to all the node. It just has to write to any one of the node and NameNode will decide on which other DataNode it will have to replicate the data. In our example Client App directly writes to DataNode 1 and detained 3. However, data chunks are automatically replicated to other nodes. All the information like in which DataNode which data block is placed is written back to NameNode. High Availability During Disaster Now as multiple DataNode have same data blocks in the case of any DataNode which faces the disaster, the entire process will continue as other DataNode will assume the role to serve the specific data block which was on the failed node. This system provides very high tolerance to disaster and provides high availability. If you notice there is only single NameNode in our architecture. If that node fails our entire Hadoop Application will stop performing as it is a single node where we store all the metadata. As this node is very critical, it is usually replicated on another clustered as well as on another data rack. Though, that replicated node is not operational in architecture, it has all the necessary data to perform the task of the NameNode in the case of the NameNode fails. The entire Hadoop architecture is built to function smoothly even there are node failures or hardware malfunction. It is built on the simple concept that data is so big it is impossible to have come up with a single piece of the hardware which can manage it properly. We need lots of commodity (cheap) hardware to manage our big data and hardware failure is part of the commodity servers. To reduce the impact of hardware failure Hadoop architecture is built to overcome the limitation of the non-functioning hardware. Tomorrow In tomorrow’s blog post we will discuss the importance of the relational database in Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Read the article

ASP.NET: Using pickup directory for outgoing e-mails

- by DigiMortal

Sending e-mails out from web applications is very common task. When we are working on or test our systems with real e-mail addresses we don’t want recipients to receive e-mails (specially if we are using some subset of real data9. In this posting I will show you how to make ASP.NET SMTP client to write e-mails to disc instead of sending them out. SMTP settings for web application I have seen many times the code where all SMTP information is kept in app settings just to read them in code and give to SMTP client. It is not necessary because we can define all these settings under system.web => mailsettings node. If you are using web.config to keep SMTP settings then all you have to do in your code is just to create SmtpClient with empty constructor. var smtpClient = new SmtpClient(); Empty constructor means that all settings are read from web.config file. What is pickup directory? If you want drastically raise e-mail throughput of your SMTP server then it is not very wise plan to communicate with it using SMTP protocol. it adds only additional overhead to your network and SMTP server. Okay, clients make connections, send messages out and it is also overhead we can avoid. If clients write their e-mails to some folder that SMTP server can access then SMTP server has e-mail forwarding as only resource-eager task to do. File operations are way faster than communication over SMTP protocol. The directory where clients write their e-mails as files is called pickup directory. By example, Exchange server has support for pickup directories. And as there are applications with a lot of users who want e-mail notifications then .NET SMTP client supports writing e-mails to pickup directory instead of sending them out. How to configure ASP.NET SMTP to use pickup directory? Let’s say, it is more than easy. It is very easy. This is all you need. <system.net> <mailSettings> <smtp deliveryMethod="SpecifiedPickupDirectory"> <specifiedPickupDirectory pickupDirectoryLocation="c:\temp\maildrop\"/> </smtp> </mailSettings> </system.net> Now make sure you don’t miss come points: Pickup directory must physically exist because it is not created automatically. IIS (or Cassini) must have write permissions to pickup directory. Go through your code and look for hardcoded SMTP settings. Also take a look at all places in your code where you send out e-mails that there are not some custom settings used for SMTP! Also don’t forget that your mails will be written now to pickup directory and they are not sent out to recipients anymore. Advanced scenario: configuring SMTP client in code In some advanced scenarios you may need to support multiple SMTP servers. If configuration is dynamic or it is not kept in web.config you need to initialize your SmtpClient in code. This is all you need to do. var smtpClient = new SmtpClient(); smtpClient.DeliveryMethod = SmtpDeliveryMethod.SpecifiedPickupDirectory; smtpClient.PickupDirectoryLocation = pickupFolder; Easy, isn’t it? i like when advanced scenarios end up with simple and elegant solutions but not with rocket science. Note for IIS SMTP service SMTP service of IIS is also able to use pickup directory. If you have set up IIS with SMTP service you can configure your ASP.NET application to use IIS pickup folder. In this case you have to use the following setting for delivery method. SmtpDeliveryMethod.PickupDirectoryFromIis You can set this setting also in web.config file. <system.net> <mailSettings> <smtp deliveryMethod="PickupDirectoryFromIis" /> </mailSettings> </system.net> Conclusion Who was still using different methods to avoid sending e-mails out in development or testing environment can now remove all the bad code from application and live on mail settings of ASP.NET. It is easy to configure and you have less code to support e-mails when you use built-in e-mail features wisely.

Read the article

Sending Outlook Invites

- by Daniel Moth

Sending an Outlook invite for a meeting (also referred to as S+ in Microsoft) is a simple thing to get right if you just run the quick mental check below, which is driven by visual cues in the Outlook UI. I know that some folks don’t do this often or are new to Outlook, so if you know one of those folks share this blog post with them and if they read nothing else ask them to read step 7. Add on the To line the folks that you want to be at the meeting. Indicate optional invitees. Click on the “To” button to bring up the dialog that lets you move folks to be Optional (you can also do this from the Scheduling Assistant). Set the Reminder according to the attendee that has to travel the most. 5 minutes is the minimum. Use the Response Options and uncheck the "Request Response" if your event is going ahead regardless of who can make it or not, i.e. if everyone is optional. Don’t force every recipient to make an extra click, instead make the extra click yourself - you are the organizer. Add a good subject Make the subject such that just by reading it folks know what the meeting is about. Examples, e.g. "Review…", "Finalize…", "XYZ sync up" If this is only between two people and what is commonly referred to as a one to one, the subject would be something like "MyName/YourName 1:1" Write the subject in such a way that when the recipient sees this on their calendar among all the other items, they know what this meeting is about without having to see location, recipients, or any other information about the invite. Add a location, typically a meeting room. If recipients are from different buildings, schedule it where the folks that are doing the other folks a favor live. Otherwise schedule it wherever the least amount of people will have to travel. If you send me an invite to come to your building, and there is more of us than you, you are silently sending me the message that you are doing me a favor so if you don’t want to do that, include a note of why this is in your building, e.g. "Sorry we are slammed with back to back meetings today so hope you can come over to our building". If this is in someone's office, the location would be something like "Moth's office (7/666)" where in parenthesis you see the office location. If some folks are remote in another building/country, or if you know you picked a time which wasn't free for everyone, add an Online option (click the Lync Meeting button). Add a date and time. This MUST be at a time that is showing on the recipients’ calendar as FREE or at worst TENTATIVE. You can check that on the Scheduling Assistant. The reality is that this is not always possible, so in that case you MUST say something about it in the Invite Body, e.g. "Sorry I can see X has a conflict, but I cannot find a better slot", or "With so many of us there are some conflicts and I cannot find a better slot so hope this works", or "Apologies but due to Y we must have this meeting at this time and I know there are some conflicts, hope you can make it anyway". When you do that, I better not be able to find a better slot myself for all of us, and of course when you do that you have implicitly designated the Busy folks as optional. Finally, the body of the invite. This has the agenda of the meeting and if applicable the courtesy apologies due to messing up steps 6 & 7. This should not be the introduction to the meeting, in other words the recipients should not be surprised when they see the invite and go to the body to read it. Notifying them of the meeting takes place via separate email where you explain the purpose and give them a heads up that you'll be sending an invite. That separate email is also your chance to attach documents, don’t do that as part of the invite. TIP: If you have sent mail about the meeting, you can then go to your sent folder to select the message and click the "Meeting" button (Ctrl+Alt+R). This will populate the body with the necessary background, auto select the mandatory and optional attendees as per the TO/CC line, and have a subject that may be good enough already (or you can tweak it). Long to write, but very quick to remember and enforce since most of it is common sense and the checklist is driven of the visual cues in the UI you use to send the invite. Comments about this post by Daniel Moth welcome at the original blog.

Read the article

Trying to detect collision between two polygons using Separating Axis Theorem

- by Holly

The only collision experience i've had was with simple rectangles, i wanted to find something that would allow me to define polygonal areas for collision and have been trying to make sense of SAT using these two links Though i'm a bit iffy with the math for the most part i feel like i understand the theory! Except my implementation somewhere down the line must be off as: (excuse the hideous font) As mentioned above i have defined a CollisionPolygon class where most of my theory is implemented and then have a helper class called Vect which was meant to be for Vectors but has also been used to contain a vertex given that both just have two float values. I've tried stepping through the function and inspecting the values to solve things but given so many axes and vectors and new math to work out as i go i'm struggling to find the erroneous calculation(s) and would really appreciate any help. Apologies if this is not suitable as a question! CollisionPolygon.java: package biz.hireholly.gameplay; import android.graphics.Canvas; import android.graphics.Color; import android.graphics.Paint; import biz.hireholly.gameplay.Types.Vect; public class CollisionPolygon { Paint paint; private Vect[] vertices; private Vect[] separationAxes; CollisionPolygon(Vect[] vertices){ this.vertices = vertices; //compute edges and separations axes separationAxes = new Vect[vertices.length]; for (int i = 0; i < vertices.length; i++) { // get the current vertex Vect p1 = vertices[i]; // get the next vertex Vect p2 = vertices[i + 1 == vertices.length ? 0 : i + 1]; // subtract the two to get the edge vector Vect edge = p1.subtract(p2); // get either perpendicular vector Vect normal = edge.perp(); // the perp method is just (x, y) => (-y, x) or (y, -x) separationAxes[i] = normal; } paint = new Paint(); paint.setColor(Color.RED); } public void draw(Canvas c, int xPos, int yPos){ for (int i = 0; i < vertices.length; i++) { Vect v1 = vertices[i]; Vect v2 = vertices[i + 1 == vertices.length ? 0 : i + 1]; c.drawLine( xPos + v1.x, yPos + v1.y, xPos + v2.x, yPos + v2.y, paint); } } /* consider changing to a static function */ public boolean intersects(CollisionPolygon p){ // loop over this polygons separation exes for (Vect axis : separationAxes) { // project both shapes onto the axis Vect p1 = this.minMaxProjection(axis); Vect p2 = p.minMaxProjection(axis); // do the projections overlap? if (!p1.overlap(p2)) { // then we can guarantee that the shapes do not overlap return false; } } // loop over the other polygons separation axes Vect[] sepAxesOther = p.getSeparationAxes(); for (Vect axis : sepAxesOther) { // project both shapes onto the axis Vect p1 = this.minMaxProjection(axis); Vect p2 = p.minMaxProjection(axis); // do the projections overlap? if (!p1.overlap(p2)) { // then we can guarantee that the shapes do not overlap return false; } } // if we get here then we know that every axis had overlap on it // so we can guarantee an intersection return true; } /* Note projections wont actually be acurate if the axes aren't normalised * but that's not necessary since we just need a boolean return from our * intersects not a Minimum Translation Vector. */ private Vect minMaxProjection(Vect axis) { float min = axis.dot(vertices[0]); float max = min; for (int i = 1; i < vertices.length; i++) { float p = axis.dot(vertices[i]); if (p < min) { min = p; } else if (p > max) { max = p; } } Vect minMaxProj = new Vect(min, max); return minMaxProj; } public Vect[] getSeparationAxes() { return separationAxes; } public Vect[] getVertices() { return vertices; } } Vect.java: package biz.hireholly.gameplay.Types; /* NOTE: Can also be used to hold vertices! Projections, coordinates ect */ public class Vect{ public float x; public float y; public Vect(float x, float y){ this.x = x; this.y = y; } public Vect perp() { return new Vect(-y, x); } public Vect subtract(Vect other) { return new Vect(x - other.x, y - other.y); } public boolean overlap(Vect other) { if( other.x <= y || other.y >= x){ return true; } return false; } /* used specifically for my SAT implementation which i'm figuring out as i go, * references for later.. * http://www.gamedev.net/page/resources/_/technical/game-programming/2d-rotated-rectangle-collision-r2604 * http://www.codezealot.org/archives/55 */ public float scalarDotProjection(Vect other) { //multiplier = dot product / length^2 float multiplier = dot(other) / (x*x + y*y); //to get the x/y of the projection vector multiply by x/y of axis float projX = multiplier * x; float projY = multiplier * y; //we want to return the dot product of the projection, it's meaningless but useful in our SAT case return dot(new Vect(projX,projY)); } public float dot(Vect other){ return (other.x*x + other.y*y); } }

Read the article

Basic WCF Unit Testing

- by Brian

Coming from someone who loves the KISS method, I was surprised to find that I was making something entirely too complicated. I know, shocker right? Now I'm no unit testing ninja, and not really a WCF ninja either, but had a desire to test service calls without a) going to a database, or b) making sure that the entire WCF infrastructure was tip top. Who does? It's not the environment I want to test, just the logic I’ve written to ensure there aren't any side effects. So, for the K.I.S.S. method: Assuming that you're using a WCF service library (you are using service libraries correct?), it's really as easy as referencing the service library, then building out some stubs for bunking up data. The service contract We’ll use a very basic service contract, just for getting and updating an entity. I’ve used the default “CompositeType” that is in the template, handy only for examples like this. I’ve added an Id property and overridden ToString and Equals. [ServiceContract] public interface IMyService { [OperationContract] CompositeType GetCompositeType(int id); [OperationContract] CompositeType SaveCompositeType(CompositeType item); [OperationContract] CompositeTypeCollection GetAllCompositeTypes(); } The implementation When I implement the service, I want to be able to send known data into it so I don’t have to fuss around with database access or the like. To do this, I first have to create an interface for my data access: public interface IMyServiceDataManager { CompositeType GetCompositeType(int id); CompositeType SaveCompositeType(CompositeType item); CompositeTypeCollection GetAllCompositeTypes(); } For the purposes of this we can ignore our implementation of the IMyServiceDataManager interface inside of the service. Pretend it uses LINQ to Entities to map its data, or maybe it goes old school and uses EntLib to talk to SQL. Maybe it talks to a tape spool on a mainframe on the third floor. It really doesn’t matter. That’s the point. So here’s what our service looks like in its most basic form: public CompositeType GetCompositeType(int id) { //sanity checks if (id == 0) throw new ArgumentException("id cannot be zero."); return _dataManager.GetCompositeType(id); } public CompositeType SaveCompositeType(CompositeType item) { return _dataManager.SaveCompositeType(item); } public CompositeTypeCollection GetAllCompositeTypes() { return _dataManager.GetAllCompositeTypes(); } But what about the datamanager? The constructor takes care of that. I don’t want to expose any testing ability in release (or the ability for someone to swap out my datamanager) so this is what we get: IMyServiceDataManager _dataManager; public MyService() { _dataManager = new MyServiceDataManager(); } #if DEBUG public MyService(IMyServiceDataManager dataManager) { _dataManager = dataManager; } #endif The Stub Now it’s time for the rubber to meet the road… Like most guys that ever talk about unit testing here’s a sample that is painting in *very* broad strokes. The important part however is that within the test project, I’ve created a bunk (unit testing purists would say stub I believe) object that implements my IMyServiceDataManager so that I can deal with known data. Here it is: internal class FakeMyServiceDataManager : IMyServiceDataManager { internal FakeMyServiceDataManager() { Collection = new CompositeTypeCollection(); Collection.AddRange(new CompositeTypeCollection { new CompositeType { Id = 1, BoolValue = true, StringValue = "foo 1", }, new CompositeType { Id = 2, BoolValue = false, StringValue = "foo 2", }, new CompositeType { Id = 3, BoolValue = true, StringValue = "foo 3", }, }); } CompositeTypeCollection Collection { get; set; } #region IMyServiceDataManager Members public CompositeType GetCompositeType(int id) { if (id <= 0) return null; return Collection.SingleOrDefault(m => m.Id == id); } public CompositeType SaveCompositeType(CompositeType item) { var existing = Collection.SingleOrDefault(m => m.Id == item.Id); if (null != existing) { Collection.Remove(existing); } if (item.Id == 0) { item.Id = Collection.Count > 0 ? Collection.Max(m => m.Id) + 1 : 1; } Collection.Add(item); return item; } public CompositeTypeCollection GetAllCompositeTypes() { return Collection; } #endregion } So it’s tough to see in this example why any of this is necessary, but in a real world application you would/should/could be applying much more logic within your service implementation. This all serves to ensure that between refactorings etc, that it doesn’t send sparking cogs all about or let the blue smoke out. Here’s a simple test that brings it all home, remember, broad strokes: [TestMethod] public void MyService_GetCompositeType_ExpectedValues() { FakeMyServiceDataManager fake = new FakeMyServiceDataManager(); MyService service = new MyService(fake); CompositeType expected = fake.GetCompositeType(1); CompositeType actual = service.GetCompositeType(2); Assert.AreEqual<CompositeType>(expected, actual, "Objects are not equal. Expected: {0}; Actual: {1};", expected, actual); } Summary That’s really all there is to it. You could use software x or framework y to do the exact same thing, but in my case I just didn’t really feel like it. This speaks volumes to my not yet ninja unit testing prowess.

Read the article

Error in my Separating Axis Theorem collision code

- by Holly

The only collision experience i've had was with simple rectangles, i wanted to find something that would allow me to define polygonal areas for collision and have been trying to make sense of SAT using these two links Though i'm a bit iffy with the math for the most part i feel like i understand the theory! Except my implementation somewhere down the line must be off as: (excuse the hideous font) As mentioned above i have defined a CollisionPolygon class where most of my theory is implemented and then have a helper class called Vect which was meant to be for Vectors but has also been used to contain a vertex given that both just have two float values. I've tried stepping through the function and inspecting the values to solve things but given so many axes and vectors and new math to work out as i go i'm struggling to find the erroneous calculation(s) and would really appreciate any help. Apologies if this is not suitable as a question! CollisionPolygon.java: package biz.hireholly.gameplay; import android.graphics.Canvas; import android.graphics.Color; import android.graphics.Paint; import biz.hireholly.gameplay.Types.Vect; public class CollisionPolygon { Paint paint; private Vect[] vertices; private Vect[] separationAxes; int x; int y; CollisionPolygon(Vect[] vertices){ this.vertices = vertices; //compute edges and separations axes separationAxes = new Vect[vertices.length]; for (int i = 0; i < vertices.length; i++) { // get the current vertex Vect p1 = vertices[i]; // get the next vertex Vect p2 = vertices[i + 1 == vertices.length ? 0 : i + 1]; // subtract the two to get the edge vector Vect edge = p1.subtract(p2); // get either perpendicular vector Vect normal = edge.perp(); // the perp method is just (x, y) => (-y, x) or (y, -x) separationAxes[i] = normal; } paint = new Paint(); paint.setColor(Color.RED); } public void draw(Canvas c, int xPos, int yPos){ for (int i = 0; i < vertices.length; i++) { Vect v1 = vertices[i]; Vect v2 = vertices[i + 1 == vertices.length ? 0 : i + 1]; c.drawLine( xPos + v1.x, yPos + v1.y, xPos + v2.x, yPos + v2.y, paint); } } public void update(int xPos, int yPos){ x = xPos; y = yPos; } /* consider changing to a static function */ public boolean intersects(CollisionPolygon p){ // loop over this polygons separation exes for (Vect axis : separationAxes) { // project both shapes onto the axis Vect p1 = this.minMaxProjection(axis); Vect p2 = p.minMaxProjection(axis); // do the projections overlap? if (!p1.overlap(p2)) { // then we can guarantee that the shapes do not overlap return false; } } // loop over the other polygons separation axes Vect[] sepAxesOther = p.getSeparationAxes(); for (Vect axis : sepAxesOther) { // project both shapes onto the axis Vect p1 = this.minMaxProjection(axis); Vect p2 = p.minMaxProjection(axis); // do the projections overlap? if (!p1.overlap(p2)) { // then we can guarantee that the shapes do not overlap return false; } } // if we get here then we know that every axis had overlap on it // so we can guarantee an intersection return true; } /* Note projections wont actually be acurate if the axes aren't normalised * but that's not necessary since we just need a boolean return from our * intersects not a Minimum Translation Vector. */ private Vect minMaxProjection(Vect axis) { float min = axis.dot(new Vect(vertices[0].x+x, vertices[0].y+y)); float max = min; for (int i = 1; i < vertices.length; i++) { float p = axis.dot(new Vect(vertices[i].x+x, vertices[i].y+y)); if (p < min) { min = p; } else if (p > max) { max = p; } } Vect minMaxProj = new Vect(min, max); return minMaxProj; } public Vect[] getSeparationAxes() { return separationAxes; } public Vect[] getVertices() { return vertices; } } Vect.java: package biz.hireholly.gameplay.Types; /* NOTE: Can also be used to hold vertices! Projections, coordinates ect */ public class Vect{ public float x; public float y; public Vect(float x, float y){ this.x = x; this.y = y; } public Vect perp() { return new Vect(-y, x); } public Vect subtract(Vect other) { return new Vect(x - other.x, y - other.y); } public boolean overlap(Vect other) { if(y > other.x && other.y > x){ return true; } return false; } /* used specifically for my SAT implementation which i'm figuring out as i go, * references for later.. * http://www.gamedev.net/page/resources/_/technical/game-programming/2d-rotated-rectangle-collision-r2604 * http://www.codezealot.org/archives/55 */ public float scalarDotProjection(Vect other) { //multiplier = dot product / length^2 float multiplier = dot(other) / (x*x + y*y); //to get the x/y of the projection vector multiply by x/y of axis float projX = multiplier * x; float projY = multiplier * y; //we want to return the dot product of the projection, it's meaningless but useful in our SAT case return dot(new Vect(projX,projY)); } public float dot(Vect other){ return (other.x*x + other.y*y); } }

Read the article

Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution

- by Kellsey Ruppel

Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution CUSTOMER AND PARTNER INFORMATION Customer Name – Siemens AG, Sector Healthcare Customer Revenue – 73,515 Billion Euro (2011, Siemens AG total) Customer Quote – “The realization of our complex requirements within a very short amount of time was enabled through the competent implementation partner Sapient, who fully used the very broad scope of standard functionality provided in the Oracle WebCenter Portal, and the management of customer services, who continuously supported the project setup. ” – Joerg Modlmayr, Project Manager, Healthcare Customer Service Portal, Siemens AG The Siemens Healthcare Sector is one of the world's largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics, medical information technology and hearing aids. Siemens offers its customers products and solutions for the entire range of patient care from a single source – from prevention and early detection to diagnosis, and on to treatment and aftercare. By optimizing clinical workflows for the most common diseases, Siemens also makes healthcare faster, better and more cost-effective. To ensure greater transparency, increased efficiency, higher user acceptance, and additional services, Siemens AG, Sector Healthcare, replaced several existing legacy portal solutions that could not meet the company’s future needs with Oracle WebCenter Portal. Various existing portal solutions that cannot meet future demands will be successively replaced by the new central service portal, which will also allow for the efficient and intuitive implementation of new service concepts. With Oracle, doctors and hospitals using Siemens medical solutions now have access to a central information portal that provides important information and services at just the push of a button. Customer Name – Siemens AG, Sector Healthcare Customer URL – www.siemens.com Customer Headquarters – Erlangen, Germany Industry – Industrial Manufacturing Employees – 360,000 Challenges – Replace disparate medical service portals to meet future demands and eliminate an unnecessarily high level of administrative work caused by heterogeneous installations Ensure portals meet current user demands to improve user-acceptance rates and increase number of total users Enable changes and expansion through standard functionality to eliminate the need for reliance on IT and reduce administrative efforts and associated high costs Ensure efficient and intuitive implementation of new service concepts for all devices and systems Ensure hospitals and clinics to transparently monitor and measure services rendered for the various medical devices and systems Increase electronic interaction and expand services to achieve a higher level of customer loyalty Solution – Deployed Oracle WebCenter Portal to ensure greater transparency, and as a result, a higher level of customer loyalty Provided a centralized platform for doctors and hospitals using Siemens’ medical technology solutions that provides important information and services at the push of a button Reduced significantly the administrative workload by centralizing the solution in the new customer service portal Secured positive feedback from customers involved in the pilot program developed by design experts from Oracle partner Sapient. The interfaces were created with customer needs in mind. The first survey taken shortly after implementation came back with 2.4 points on a scale of 0-3 in the category “customer service portal intuitiveness level” Met all requirements including alignment with the Siemens Style Guide without extensive programming Implemented additional services via the portal such as benchmarking options to ensure the optimal use of the Customer Device Park Provided option for documentation of all services rendered in conjunction with the medical technology systems to ensure that the value of the services are transparent for the decision makers in the hospitals Saved and stored all machine data from approximately 100,000 remote systems in the central service and information platform Provided the option to register errors online and follow the call status in real-time on the portal Made available at the push of a button all information on the medical technology devices used in hospitals or clinics—from security checks and maintenance activities to current device statuses Provided PDF format Service Performance Reports that summarize information from periods of time ranging from previous weeks up to one year, meeting medical product law requirements Why Oracle – Siemens AG favored Oracle for many reasons, however, the company ultimately decided to go with Oracle due to the enormous range of functionality the solutions offered for the healthcare sector.“We are not programmers; we are service providers in the medical technology segment and focus on the contents of the portal. All the functionality necessary for internet-based customer interaction is already standard in Oracle WebCenter Portal, which is a huge plus for us. Having Oracle as our technology partner ensures that the product will continually evolve, providing a strong technology platform for our customer service portal well into the future,” said Joerg Modlmayr project manager, Healthcare Customer Service Portal, Siemens AG. Partner Involvement – Siemens AG selected Oracle Partner Sapient because the company offered a service portfolio that perfectly met Siemens’ requirements and had a wealth of experience implementing Oracle WebCenter Portal. Additionally, Sapient had designers with a very high level of expertise in usability—an aspect that Siemens considered to be of vast importance for the project. “The Sapient team completely met all our expectations. Our tightly timed project was completed on schedule, and the positive feedback from our users proves that we set the right measures in terms of usability—all thanks to the folks at Sapient,” Modlmayr said. Partner Name – Sapient GmbH Deutschland Partner URL – www.sapient.com

Read the article

VirtualBox appliance for the Oracle Communications Service Delivery Platform (SDP) Products

- by chlander

It's been quite awhile since we last blogged. This blog is written by Leif Lourie, a Curriculum Developer for the Oracle Communications Service Delivery Platform (SDP) products. For the last 8 years, Leif has worked as a Curriculum Developer for many of the telecom-oriented products that Oracle offers. He has been working in the telecom industry for about 25 years and has also worked as a software developer, project manager, and solutions architect. He is currently working on courseware for an upcoming release for one of the Service Delivery Platform products. Thanks to Leif not only for this blog, but for making the VM described in the blog available. Cheryl Lander, Oracle Communications InfoDev Senior Director To be able to download, install and test a product within a day is many times very important for people that are doing the primary evaluation of a software product. If it takes longer, it will require a bigger effort, like a proof-of-concept project with many people involved. Of course, if the product is chosen for a more thorough test, it will probably happen anyway, but then maybe with focus on integration instead of product features. We have a long tradition of creating complex software that is easy to install and test and we have often been praised for the ease of getting our products up and running. One key for this has been that there has always been an installer for Windows, as well as for the production environments that usually are Unix and Linux. And, the windows installer has, in most cases, been released for developing and testing purposes. Lately, this has changed. Our products are very seldom released for the Windows platform, at all. And even the Linux versions are almost always released for 64-bit systems. This is creating problems for many of the people that want to try out our products, since few have access to a 64-bit Linux system of the right platform. Most of us are using a laptop with Windows or Mac OS. Some of us are using Linux or Solaris, but probably a non certified distribution for the product you want to test. My job, among other things, is to develop hands-on practices for our products. For me, it is crucial to have access to environments for installing and using our products. For this reason I have been using virtual machines for many years.I have a ready-made base system, with the necessary tools installed for all the products I create hands-on practices for. Whenever I start working on hands-on practices for a new product or a new version, I just copy the base system and start working with a clean slate. This saves me a lot of time! Now, I would like to start saving time for my favorite student: You! If you are using our products and regularly test new versions you might benefit from the virtual machine that is now available on Oracle Technology Network: The Virtual Machine for the Oracle Communications Service Delivery Platform (SDP) Products. This virtual machine contains an installation of the 64-bit version of Oracle Enterprise Linux, version 6. It also has Oracle Database Express Edition (XE), Oracle Java and Oracle Enterprise Pack for Eclipse installed. By using Oracle VM VirtualBox you may use Windows, OS X, Linux or Solaris on your laptop. VirtualBox can be installed on top of any of these platforms and give you the ability to run virtual machines in your laptop. After downloading and starting the virtual machine you will also need to download the installation files for the product you want to test; for example Oracle Communications Services Gatekeeper or Oracle Communications Online Mediation Controller. In some cases there are lessons and practices available for the products. The freely available courses are listed in Oracle Learning Library as a Collection of Oracle Communications Service Delivery Platform Courses. As time goes by, we will make this list collection bigger. Also, the goal is to update the virtual machine about one to two times per year. So you will always be able to get a well maintained virtual machine for the Service Delivery Platform products from us. We Value Your Feedback If you would like to suggest improvements or report issues on any of the product documentation, curriculum, or training produced by the Oracle Communications Information Development team, you can use these channels: Email [email protected]. Post a comment on this blog. Thanks for reading!

Read the article

Data management in unexpected places

- by Ashok_Ora

Normal 0 false false false EN-US X-NONE X-NONE Data management in unexpected places When you think of network switches, routers, firewall appliances, etc., it may not be obvious that at the heart of these kinds of solutions is an engine that can manage huge amounts of data at very high throughput with low latencies and high availability. Consider a network router that is processing tens (or hundreds) of thousands of network packets per second. So what really happens inside a router? Packets are streaming in at the rate of tens of thousands per second. Each packet has multiple attributes, for example, a destination, associated SLAs etc. For each packet, the router has to determine the address of the next “hop” to the destination; it has to determine how to prioritize this packet. If it’s a high priority packet, then it has to be sent on its way before lower priority packets. As a consequence of prioritizing high priority packets, lower priority data packets may need to be temporarily stored (held back), but addressed fairly. If there are security or privacy requirements associated with the data packet, those have to be enforced. You probably need to keep track of statistics related to the packets processed (someone’s sure to ask). You have to do all this (and more) while preserving high availability i.e. if one of the processors in the router goes down, you have to have a way to continue processing without interruption (the customer won’t be happy with a “choppy” VoIP conversation, right?). And all this has to be achieved without ANY intervention from a human operator – the router is most likely to be in a remote location – it must JUST CONTINUE TO WORK CORRECTLY, even when bad things happen. How is this implemented? As soon as a packet arrives, it is interpreted by the receiving software. The software decodes the packet headers in order to determine the destination, kind of packet (e.g. voice vs. data), SLAs associated with the “owner” of the packet etc. It looks up the internal database of “rules” of how to process this packet and handles the packet accordingly. The software might choose to hold on to the packet safely for some period of time, if it’s a low priority packet. Ah – this sounds very much like a database problem. For each packet, you have to minimally · Look up the most efficient next “hop” towards the destination. The “most efficient” next hop can change, depending on latency, availability etc. · Look up the SLA and determine the priority of this packet (e.g. voice calls get priority over data ftp) · Look up security information associated with this data packet. It may be necessary to retrieve the context for this network packet since a network packet is a small “slice” of a session. The context for the “header” packet needs to be stored in the router, in order to make this work. · If the priority of the packet is low, then “store” the packet temporarily in the router until it is time to forward the packet to the next hop. · Update various statistics about the packet. In most cases, you have to do all this in the context of a single transaction. For example, you want to look up the forwarding address and perform the “send” in a single transaction so that the forwarding address doesn’t change while you’re sending the packet. So, how do you do all this? Berkeley DB is a proven, reliable, high performance, highly available embeddable database, designed for exactly these kinds of usage scenarios. Berkeley DB is a robust, reliable, proven solution that is currently being used in these scenarios. First and foremost, Berkeley DB (or BDB for short) is very very fast. It can process tens or hundreds of thousands of transactions per second. It can be used as a pure in-memory database, or as a disk-persistent database. BDB provides high availability – if one board in the router fails, the system can automatically failover to another board – no manual intervention required. BDB is self-administering – there’s no need for manual intervention in order to maintain a BDB application. No need to send a technician to a remote site in the middle of nowhere on a freezing winter day to perform maintenance operations. BDB is used in over 200 million deployments worldwide for the past two decades for mission-critical applications such as the one described here. You have a choice of spending valuable resources to implement similar functionality, or, you could simply embed BDB in your application and off you go! I know what I’d do – choose BDB, so I can focus on my business problem. What will you do? /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

Read the article

Silverlight Cream Monday WP7 App Review # 2

- by Dave Campbell

Today's Review (alphabetic order): GooNews, Grocery Shopping List, Need for Speed, SurfCube, and United Nations News. I'm a day late if these are going to be 'Monday' posts, but there are lots of apps, lots of goodness, and lots of email, so I might try to do 2 a week, we'll see. So once again I've got a small review of 5 apps that are either on my phone or have been. Disclaimers at the end. In this Issue: GooNews is a very cool app from Shawn Wildermuth (AgiliTrain). I don't know if he uses this as a demo during his instruction, but it definitely serves a purpose... wanna pick up the top news items from Google on a never-ending basis? ... this is it. You can add your own keyword searches, and send stories to InstaPaper or share via email. I like this because it brings me the news quickly and updated, and works great. GooNews is by AgiliTrain and is Free This was a request by the author, and actually surprised me. I'm a big one for lists, but I would have just done a OneNote list to SkyDrive and to my phone. This app is a lot more than that, but will take you some setup to make it be 'yours'. For obvious reasons, there are no unit prices on things, so you have to set that up to get some idea of the cost of what you're shopping for. But if you do that, you'll get a nice total. Lots of thought went into the various categories and you can add your own. There's a bit of animation on the category selection that's nice. He seems to have covered all the bases necessary to use this, even shopping 'plans' that can be saved, and emailing of lists. As I said, I'm more of a raw list person, but if you take the time to set this up, it should work very nicely for you. Grocery Shopping List is by Grocery Shopper and is $0.99 ($1.99 after Feb 1) with a free trial. This was my 2nd commercial game I bought, and the one I've played the most. I ran the trial, thought it worked great, and bought it. I've had a lot of fun with this... there's no gas pedal.. your foot is in the carbeurator from the GO!, and unless you wanna tap the screen and brake like a little girl, just hang onto the steering wheel (the phone), and guide your way through. Hours of fun and challenges here. I like this because it's got some challenge to it, and the cars seem to be very realistic in their reactions. Need for Speed Undercover is by Electronic Arts is $4.99 and has a free trial. SurfCube Browser is another app by the folks that did the GuitarTuner I reviewed on Monday. You have to see SurfCube to believe it. You've probably seen the YouTube video, if not check SilverlightCream number 1017. The app works very solid, and just as the video demonstrates. I downloaded and tried this, and it immediately did 2 things: bought it, and pinned it to my start page. I like this because it's fun to work with, and it works great as a browser. I'm about *this* close to replacing the IE tile on my front page with SurfCube. SurfCube Browser is by Kinabalu Innovation Limited and is $1.99 and has a free trial. Coming in with another News app is United Nations News by Justin Angel. This is definitely a news aggregator for 'grown ups'... news, photos, videos, and radio broadcsts from the international community all in one very slick app. This is an amazingly well thought-out and complete app. Even better yet, Justin has the code on CodePlex. A very well-done International news aggregator. United Nations News is by Justin Angel and is Free. A few disclaimers: Feel free to write me about your app and tell me about it. While it would be very cool to receive a whole bunch of xap files to review, at this point, for technical reasons, I'm unable to side-load my device. Since I plan on only doing this one day a week (twice if I find time), and only 5, I may never get caught up, so if you send me some info, be patient. Re: games ... remember I'm old... I'm from the era of Colossal Cave and Zork. Duke-Nukem 2D and Captain Comic were awesome. I don't own an XBOX or any other game system, so take game reviews from my perspective -- who knows, it may be refreshing :) I won't pay for an app or game just to try it. If you expect me to test-drive your app, it's going to have to have a Free Trial. I'm still playing with the format, comments are welcome. I decided I should alphabetize the list today... so there's no order implied Let me know what you think of the idea of doing reviews, or the layout/whatever, and Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

How is the gimbal locked problem solved using accumulative matrix transformations

- by Luke San Antonio

I am reading the online "Learning Modern 3D Graphics Programming" book by Jason L. McKesson As of now, I am up to the gimbal lock problem and how to solve it using quaternions. However right here, at the Quaternions page. Part of the problem is that we are trying to store an orientation as a series of 3 accumulated axial rotations. Orientations are orientations, not rotations. And orientations are certainly not a series of rotations. So we need to treat the orientation of the ship as an orientation, as a specific quantity. I guess this is the first spot I start to get confused, the reason is because I don't see the dramatic difference between orientations and rotations. I also don't understand why an orientation cannot be represented by a series of rotations... Also: The first thought towards this end would be to keep the orientation as a matrix. When the time comes to modify the orientation, we simply apply a transformation to this matrix, storing the result as the new current orientation. This means that every yaw, pitch, and roll applied to the current orientation will be relative to that current orientation. Which is precisely what we need. If the user applies a positive yaw, you want that yaw to rotate them relative to where they are current pointing, not relative to some fixed coordinate system. The concept, I understand, however I don't understand how if accumulating matrix transformations is a solution to this problem, how the code given in the previous page isn't just that. Here's the code: void display() { glClearColor(0.0f, 0.0f, 0.0f, 0.0f); glClearDepth(1.0f); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glutil::MatrixStack currMatrix; currMatrix.Translate(glm::vec3(0.0f, 0.0f, -200.0f)); currMatrix.RotateX(g_angles.fAngleX); DrawGimbal(currMatrix, GIMBAL_X_AXIS, glm::vec4(0.4f, 0.4f, 1.0f, 1.0f)); currMatrix.RotateY(g_angles.fAngleY); DrawGimbal(currMatrix, GIMBAL_Y_AXIS, glm::vec4(0.0f, 1.0f, 0.0f, 1.0f)); currMatrix.RotateZ(g_angles.fAngleZ); DrawGimbal(currMatrix, GIMBAL_Z_AXIS, glm::vec4(1.0f, 0.3f, 0.3f, 1.0f)); glUseProgram(theProgram); currMatrix.Scale(3.0, 3.0, 3.0); currMatrix.RotateX(-90); //Set the base color for this object. glUniform4f(baseColorUnif, 1.0, 1.0, 1.0, 1.0); glUniformMatrix4fv(modelToCameraMatrixUnif, 1, GL_FALSE, glm::value_ptr(currMatrix.Top())); g_pObject->Render("tint"); glUseProgram(0); glutSwapBuffers(); } To my understanding, isn't what he is doing (modifying a matrix on a stack) considered accumulating matrices, since the author combined all the individual rotation transformations into one matrix which is being stored on the top of the stack. My understanding of a matrix is that they are used to take a point which is relative to an origin (let's say... the model), and make it relative to another origin (the camera). I'm pretty sure this is a safe definition, however I feel like there is something missing which is blocking me from understanding this gimbal lock problem. One thing that doesn't make sense to me is: If a matrix determines the difference relative between two "spaces," how come a rotation around the Y axis for, let's say, roll, doesn't put the point in "roll space" which can then be transformed once again in relation to this roll... In other words shouldn't any further transformations to this point be in relation to this new "roll space" and therefore not have the rotation be relative to the previous "model space" which is causing the gimbal lock. That's why gimbal lock occurs right? It's because we are rotating the object around set X, Y, and Z axes rather than rotating the object around it's own, relative axes. Or am I wrong? Since apparently this code I linked in isn't an accumulation of matrix transformations can you please give an example of a solution using this method. So in summary: What is the difference between a rotation and an orientation? Why is the code linked in not an example of accumulation of matrix transformations? What is the real, specific purpose of a matrix, if I had it wrong? How could a solution to the gimbal lock problem be implemented using accumulation of matrix transformations? Also, as a bonus: Why are the transformations after the rotation still relative to "model space?" Another bonus: Am I wrong in the assumption that after a transformation, further transformations will occur relative to the current? Also, if it wasn't implied, I am using OpenGL, GLSL, C++, and GLM, so examples and explanations in terms of these are greatly appreciated, if not necessary. The more the detail the better! Thanks in advance...

Read the article

Highlights from the Oracle Customer Experience Summit @ OpenWorld

- by Richard Lefebvre

The Oracle Customer Experience Summit was the first-ever event covering the full breadth of Oracle's CX portfolio -- Marketing, Sales, Commerce, and Service. The purpose of the Summit was to articulate the customer experience imperative and to showcase the suite of Oracle products that can help our customers create the best possible customer experience. This topic has always been a very important one, but now that there are so many alternative companies to do business with and because people have such public ways to voice their displeasure, it's necessary for vendors to have multiple listening posts in place to gauge consumer sentiment. They need to know what is going on in real time and be able to react quickly to turn negative situations into positive ones. Those can then be shared in a social manner to enhance the brand and turn the customer into a repeat customer. The Summit was focused on Oracle's portfolio of products and entirely dedicated to customers who are committed to building great customer experiences within their businesses. Rather than DBAs, the attendees were business people looking to collaborate with other like-minded experts and find out how Oracle can help in terms of technology, best practices, and expertise. The event was at the Westin St. Francis Hotel in San Francisco as part of Oracle OpenWorld. We had eight hundred people attend, which was great for the first year. Next year, there's no doubt in my mind, we can raise that number to 5,000. Alignment and Logic Oracle's Customer Experience portfolio is made up of a combination of acquired and organic products owned by many people who are new to Oracle. We include homegrown Fusion CRM, as well as RightNow, Inquira, OPA, Vitrue, ATG, Endeca, and many others. The attendees knew of the acquisitions, so naturally they wanted to see how the products all fit together and hear the logic behind the portfolio. To tell them about our alignment, we needed to be aligned. To accomplish that, a cross functional team at Oracle agreed on the messaging so that every single Oracle presenter could cover the big picture before going deep into a product or topic. Talking about the full suite of products in one session produced overflow value for other products. And even though this internal coordination was a huge effort, everyone saw the value for our customers and for our long-term cooperation and success. Keynotes, Workshops, and Tents of Innovation We scored by having Seth Godin as our keynote speaker ? always provocative and popular. The opening keynote was a session orchestrated by Mark Hurd, Anthony Lye, and me. Mark set the stage by giving real-world examples of bad customer experiences, Anthony clearly articulated the business imperative for addressing these experiences, and I brought it all to life by taking the audience around the Customer Lifecycle and showing demos and videos, with partners included at each of the stops around the lifecycle. Brian Curran, a VP for RightNow Product Strategy, presented a session that was in high demand called The Economics of Customer Experience. People loved hearing how to build a business case and justify the cost of building a better customer experience. John Kembel, another VP for RightNow Product Strategy, held a workshop that customers raved about. It was based on the journey mapping methodology he created, which is a way to talk to customers about where they want to make improvements to their customers' experiences. He divided the audience into groups led by facilitators. Each person had the opportunity to engage with experts and peers and construct some real takeaways. The conference hotel was across from Union Square so we used that space to set up Innovation Tents. During the day we served lunch in the tents and partners showed their different innovative ideas. It was very interesting to see all the technologies and advancements. It also gave people a place to mix and mingle and to think about the fringe of where we could all take these ideas. Product Portfolio Plus Thought Leadership Of course there is always room for improvement, but the feedback on the format of the conference was positive. Ninety percent of the sessions had either a partner or a customer teamed with an Oracle presenter. The presentations weren't dry, one-way information dumps, but more interactive. I just followed up with a CEO who attended the conference with his Head of Marketing. He told me that they are using John Kembel's journey mapping methodology across the organization to pull people together. This sort of thought leadership in these highly competitive areas gives Oracle permission to engage around the technology. We have to differentiate ourselves and it's harder to do on the product side because everyone looks the same on paper. But on thought leadership ? we can, and did, take some really big steps. David Vap Group Vice President Oracle Applications Product Development

Read the article

SQL SERVER – Weekly Series – Memory Lane – #004

- by pinaldave

Here is the list of curetted articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Auto Generate Script to Delete Deprecated Fields in Current Database In early career everytime I have to drop a column, I had hard time doing it because I was scared what if that column was needed somewhere in the code. Due to this fear I never dropped any column. I just renamed the column. If the column which I renamed was needed afterwards it was very easy to rename it back again. However, it is not recommended to keep the deleted column renamed in the database. At every interval I used to drop the columns which was prefixed with specific word. This script is 6 years old but still works. Give it a look, I am open for improvements. 2007 Shrinking Truncate Log File – Log Full – Part 2 Shrinking database or mdf file is indeed bad thing and it creates lots of problems. However, once in a while there is legit requirement to shrink the log file – a very rare one. In the rare occasion shrinking or truncating the log file may be the only solution. However, one should make sure to take backup before and after the truncate or shrink as in case of a disaster they can be very useful. Remember that truncating log file will break the log chain and while restore it can create major issue. Anyway, use this feature with caution. 2008 Simple Use of Cursor to Print All Stored Procedures of Database Including Schema This is a very interesting requirement I used to face in my early career days, I needed to print all the Stored procedures of my database. Interesting enough I had written a cursor to do so. Today when I look back at this stored procedure, I believe there will be a much cleaner way to do the same task, however, I still use this SP quite often when I have to document all the stored procedures of my database. Interesting Observation about Order of Resultset without ORDER BY In industry many developers avoid using ORDER BY clause to display the result in particular order thinking that Index is enforcing the order. In this interesting example, I demonstrate that without using ORDER BY, same table and similar query can return different results. Query optimizer always returns results using any method which is optimized for performance. The learning is There is no order unless ORDER BY is used. 2009 Size of Index Table – A Puzzle to Find Index Size for Each Index on Table I asked this puzzle earlier where I asked how to find the Index size for each of the tables. The puzzle was very well received and lots of interesting answers were received. To answer this question I have written following blog posts. I suggest this weekend you try to solve this problem and see if you can come up with a better solution. If not, well here are the solutions. Solution 1 | Solution 2 | Solution 3 Understanding Table Hints with Examples Hints are options and strong suggestions specified for enforcement by the SQL Server query processor on DML statements. The hints override any execution plan the query optimizer might select for a query. The SQL Server Query optimizer is a very smart tool and it makes a better selection of execution plan. Suggesting hints to the Query Optimizer should be attempted when absolutely necessary and by experienced developers who know exactly what they are doing (or in development as a way to experiment and learn). Interesting Observation – TOP 100 PERCENT and ORDER BY I have seen developers and DBAs using TOP very causally when they have to use the ORDER BY clause. Theoretically, there is no need of ORDER BY in the view at all. All the ordering should be done outside the view and view should just have the SELECT statement in it. It was quite common that to save this extra typing by including ordering inside of the view. At several instances developers want a complete resultset and for the same they include TOP 100 PERCENT along with ORDER BY, assuming that this will simulate the SELECT statement with ORDER BY. 2010 SQLPASS Nov 8-11, 2010-Seattle – An Alternative Look at Experience In year 2010 I attended most prestigious SQL Server event SQLPASS between Nov 8-11, 2010 at Seattle. I have only one expression for the event - Best Summit Ever. Instead of writing about my usual routine or the event, I wrote about the interesting things I did and how I felt about it! When I go back and read it, I feel that this is the best event I attended in year 2010. Change Database Access to Single User Mode Using SSMS Image says all. 2011 SQL Server 2012 has introduced new analytic functions. These functions were long awaited and I am glad that they are now here. Before when any of this function was needed, people used to write long T-SQL code to simulate these functions. But now there’s no need of doing so. Having available native function also helps performance as well readability. Function SQLAuthority MSDN CUME_DIST CUME_DIST CUME_DIST FIRST_VALUE FIRST_VALUE FIRST_VALUE LAST_VALUE LAST_VALUE LAST_VALUE LEAD LEAD LEAD LAG LAG LAG PERCENTILE_CONT PERCENTILE_CONT PERCENTILE_CONT PERCENTILE_DISC PERCENTILE_DISC PERCENTILE_DISC PERCENT_RANK PERCENT_RANK PERCENT_RANK Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

When is my View too smart?

- by Kyle Burns

In this posting, I will discuss the motivation behind keeping View code as thin as possible when using patterns such as MVC, MVVM, and MVP. Once the motivation is identified, I will examine some ways to determine whether a View contains logic that belongs in another part of the application. While the concepts that I will discuss are applicable to most any pattern which favors a thin View, any concrete examples that I present will center on ASP.NET MVC. Design patterns that include a Model, a View, and other components such as a Controller, ViewModel, or Presenter are not new to application development. These patterns have, in fact, been around since the early days of building applications with graphical interfaces. The reason that these patterns emerged is simple – the code running closest to the user tends to be littered with logic and library calls that center around implementation details of showing and manipulating user interface widgets and when this type of code is interspersed with application domain logic it becomes difficult to understand and much more difficult to adequately test. By removing domain logic from the View, we ensure that the View has a single responsibility of drawing the screen which, in turn, makes our application easier to understand and maintain. I was recently asked to take a look at an ASP.NET MVC View because the developer reviewing it thought that it possibly had too much going on in the view. I looked at the .CSHTML file and the first thing that occurred to me was that it began with 40 lines of code declaring member variables and performing the necessary calculations to populate these variables, which were later either output directly to the page or used to control some conditional rendering action (such as adding a class name to an HTML element or not rendering another element at all). This exhibited both of what I consider the primary heuristics (or code smells) indicating that the View is too smart: Member variables – in general, variables in View code are an indication that the Model to which the View is being bound is not sufficient for the needs of the View and that the View has had to augment that Model. Notable exceptions to this guideline include variables used to hold information specifically related to rendering (such as a dynamically determined CSS class name or the depth within a recursive structure for indentation purposes) and variables which are used to facilitate looping through collections while binding. Arithmetic – as with member variables, the presence of arithmetic operators within View code are an indication that the Model servicing the View is insufficient for its needs. For example, if the Model represents a line item in a sales order, it might seem perfectly natural to “normalize” the Model by storing the quantity and unit price in the Model and multiply these within the View to show the line total. While this does seem natural, it introduces a business rule to the View code and makes it impossible to test that the rounding of the result meets the requirement of the business without executing the View. Within View code, arithmetic should only be used for activities such as incrementing loop counters and calculating element widths. In addition to the two characteristics of a “Smart View” that I’ve discussed already, this View also exhibited another heuristic that commonly indicates to me the need to refactor a View and make it a bit less smart. That characteristic is the existence of Boolean logic that either does not work directly with properties of the Model or works with too many properties of the Model. Consider the following code and consider how logic that does not work directly with properties of the Model is just another form of the “member variable” heuristic covered earlier: @if(DateTime.Now.Hour < 12) { <div>Good Morning!</div> } else { <div>Greetings</div> } This code performs business logic to determine whether it is morning. A possible refactoring would be to add an IsMorning property to the Model, but in this particular case there is enough similarity between the branches that the entire branching structure could be collapsed by adding a Greeting property to the Model and using it similarly to the following: <div>@Model.Greeting</div> Now let’s look at some complex logic around multiple Model properties: @if (ModelPageNumber + Model.NumbersToDisplay == Model.PageCount || (Model.PageCount != Model.CurrentPage && !Model.DisplayValues.Contains(Model.PageCount))) { <div>There's more to see!</div> } In this scenario, not only is the View code difficult to read (you shouldn’t have to play “human compiler” to determine the purpose of the code), but it also complex enough to be at risk for logical errors that cannot be detected without executing the View. Conditional logic that requires more than a single logical operator should be looked at more closely to determine whether the condition should be evaluated elsewhere and exposed as a single property of the Model. Moving the logic above outside of the View and exposing a new Model property would simplify the View code to: @if(Model.HasMoreToSee) { <div>There’s more to see!</div> } In this posting I have briefly discussed some of the more prominent heuristics that indicate a need to push code from the View into other pieces of the application. You should now be able to recognize these symptoms when building or maintaining Views (or the Models that support them) in your applications.

Read the article

Actionscript 3.0 - Enemies do not move right in my platformer game

- by Christian Basar

I am making a side-scrolling platformer game in Flash (Actionscript 3.0). I have made lots of progress lately, but I have come across a new problem. I will give some background first. My game level's terrain (or 'floor') is referenced by a MovieClip variable called 'floor.' My desire is to have the Player and enemy characters walk along the terrain. I have gotten the Player character to move on the terrain just fine; he walks up/down hills and falls whenever there is no ground beneath him. Here is the code I created to allow the Player to follow the terrain correctly. Much more code is used to control the Player, but only this code deals with the Player character's following of the terrain and gravity. // If the Player's not on the ground (not touching the 'floor' MovieClip)... if (!onGround) { // Disable ducking downKeyPressed = false; // Increase the Player's 'y' position by his 'y' velocity player.y += playerYVel; } // Increase the 'playerYVel' variable so that the Player will fall // progressively faster down the screen. This code technically // runs "all the time" but in reality it only affects the player // when he's off the ground. playerYVel += gravity; // Give the Player a terminal velocity of 15 px/frame if (playerYVel > 15) { playerYVel = 15; } // If the Player has not hit the 'floor,' increase his falling //speed if (! floor.hitTestPoint(player.x, player.y, true)) { player.y += playerYVel; // The Player is not on the ground when he's not touching it onGround = false; } Since getting this code to work for the Player, I have created a 'SkullDemon' class, which is one of the planned enemies for my game. I want the 'SkullDemon' objects to move along the terrain like the Player does. With lots of great help, I have already coded the EventListeners, etc. necessary for the 'SkullDemons' to move. Unfortunately, I am having trouble getting them to move along the terrain. In fact, they do not touch the terrain at all; they move along the top of the boundary of the 'floor' MovieClip! I had a simple text diagram showing what I mean, but unfortunately Stackoverflow does not format it correctly. I hope my problem is clear from my description. Strangely enough, my code for the Player's movement and the 'SkullDemon's' movement is almost exactly the same, yet the 'SkullDemons' do not move like the Player does. Here is my code for the SkullDemon movement: // Move all of the Skull Demons using this method protected function moveSkullDemons():void { // Go through the whole 'skullDemonContainer' for (var skullDi:int = 0; skullDi < skullDemonContainer.numChildren; skullDi++) { // Set the SkullDemon 'instance' variable to equal the current SkullDemon skullDIns = SkullDemon(skullDemonContainer.getChildAt(skullDi)); // For now, just move the Skull Demons left at 5 units per second skullDIns.x -= 5; // If the Skull Demon has not hit the 'floor,' increase his falling //speed if (! floor.hitTestPoint(skullDIns.x, skullDIns.y, true)) { // Increase the Skull Demon's 'y' position by his 'y' velocity skullDIns.y += skullDIns.sdYVel; // The Skull Demon is not on the ground when he's not touching it skullDIns.sdOnGround = false; } // Increase the 'sdYVel' variable so that the Skull Demon will fall // progressively faster down the screen. This code technically // runs "all the time" but in reality it only affects the Skull Demon // when he's off the ground. if (! skullDIns.sdOnGround) { skullDIns.sdYVel += skullDIns.sdGravity; // Give the Skull Demon a terminal velocity of 15 px/frame if (skullDIns.sdYVel > 15) { skullDIns.sdYVel = 15; } } // What happens when the Skull Demon lands on the ground after a fall? // The Skull Demon is only on the ground ('onGround == true') when // the ground is touching the Skull Demon MovieClip's origin point, // which is at the Skull Demon's bottom centre for (var i:int = 0; i < 10; i++) { // The Skull Demon is only on the ground ('onGround == true') when // the ground is touching the Skull Demon MovieClip's origin point, // which is at the Skull Demon's bottom centre if (floor.hitTestPoint(skullDIns.x, skullDIns.y, true)) { skullDIns.y = skullDIns.y; // Set the Skull Demon's y-axis speed to 0 skullDIns.sdYVel = 0; // The Skull Demon is on the ground again skullDIns.sdOnGround = true; } } } } // End of 'moveSkullDemons()' function It is almost like the 'SkullDemons' are interacting with the 'floor' MovieClip using the hitTestObject() function, and not the hitTestPoint() function which is what I want, and which works for the Player character. I am confused about this problem and would appreciate any help you could give me. Thanks!

Read the article

Custom Configuration Section Handlers

Most .NET developers who need to store something in configuration tend to use appSettings for this purpose, in my experience. More recently, the framework itself has helped things by adding the <connectionStrings /> section so at least these are in their own section and not adding to the appSettings clutter that pollutes most apps. I recommend avoiding appSettings for several reasons. In addition to those listed there, I would add that strong typing and validation are additional reasons to go the custom configuration section route. For my ASP.NET Tips and Tricks talk, I use the following example, which is a simple DemoSettings class that includes two fields. The first is an integer representing how many attendees there are present for the talk, and the second is the title of the talk. The setup in web.config is as follows: <configSections> <section name="DemoSettings" type="ASPNETTipsAndTricks.Code.DemoSettings" /> </configSections> <DemoSettings sessionAttendees="100" title="ASP.NET Tips and Tricks DevConnections Spring 2010" /> Referencing the values in code is strongly typed and straightforward. Here I have a page that exposes two properties which internally get their values from the configuration section handler: public partial class CustomConfig1 : System.Web.UI.Page { public string SessionTitle { get { return DemoSettings.Settings.Title; } } public int SessionAttendees { get { return DemoSettings.Settings.SessionAttendees; } } } Note that the settings are only read from the config file once after that they are cached so there is no need to be concerned about excessive file access. Now weve seen how to set it up on the config file and how to refer to the settings in code. All that remains is to see the file itself: public class DemoSettings : ConfigurationSection { private static DemoSettings settings = ConfigurationManager.GetSection("DemoSettings") as DemoSettings; public static DemoSettings Settings{ get { return settings;} } [ConfigurationProperty("sessionAttendees" , DefaultValue = 200 , IsRequired = false)] [IntegerValidator(MinValue = 1 , MaxValue = 10000)] public int SessionAttendees { get { return (int)this["sessionAttendees"]; } set { this["sessionAttendees"] = value; } } [ConfigurationProperty("title" , IsRequired = true)] [StringValidator(InvalidCharacters = "~!@#$%^&*()[]{}/;\"|\\")] public string Title { get { return (string)this["title"]; } set { this["title"] = value; } } } The class is pretty straightforward, but there are some important components to note. First, it must inherit from System.Configuration.ConfigurationSection. Next, as a convention I like to have a static settings member that is responsible for pulling out the section when the class is first referenced, and further to expose this collection via a static readonly property, Settings. Note that the types of both of these are the type of my class, DemoSettings. The properties of the class, SessionAttendees and Title, should map to the attributes of the config element in the XML file. The [ConfigurationProperty] attribute allows you to map the attribute name to the property name (thus using both XML standard naming conventions and C# naming conventions). In addition, you can specify a default value to use if nothing is specified in the config file, and whether or not the setting must be provided (IsRequired). If it is required, then it doesnt make sense to include a default value. Beyond defaults and required, you can specify more advanced validation rules for the configuration values using additional C# attributes, such as [IntegerValidator] and [StringValidator]. Using these, you can declaratively specify that your configuration values be in a given range, or omit certain forbidden characters, for instance. Of course you can write your own custom validation attributes, and there are others specified in System.Configuration. Individual sections can also be loaded from separate files, using syntax like this: <DemoSettings configSource="demosettings.config" /> Summary Using a custom configuration section handler is not hard. If your application or component requires configuration, I recommend creating a custom configuration handler dedicated to your app or component. Doing so will reduce the clutter in appSettings, will provide you with strong typing and validation, and will make it much easier for other developers or system administrators to locate and understand the various configuration values that are necessary for a given application. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Alternative way of developing for ASP.NET to WebForms - Any problems with this?

- by John

So I have been developing in ASP.NET WebForms for some time now but often get annoyed with all the overhead (like ViewState and all the JavaScript it generates), and the way WebForms takes over a lot of the HTML generation. Sometimes I just want full control over the markup and produce efficient HTML of my own so I have been experimenting with what I like to call HtmlForms. Essentially this is using ASP.NET WebForms but without the form runat="server" tag. Without this tag, ASP.NET does not seem to add anything to the page at all. From some basic tests it seems that it runs well and you still have the ability to use code-behind pages, and many ASP.NET controls such as repeaters. Of course without the form runat="server" many controls won't work. A post at Enterprise Software Development lists the controls that do require the tag. From that list you will see that all of the form elements like TextBoxes, DropDownLists, RadioButtons, etc cannot be used. Instead you use normal HTML form controls. But how do you access these HTML controls from the code behind? Retrieving values on post back is easy, you just use Request.QueryString or Request.Form. But passing data to the control could be a little messy. Do you use a ASP.NET Literal control in the value field or do you use <%= value % in the markup page? I found it best to add runat="server" to my HTML controls and then you can access the control in your code-behind like this: ((HtmlInputText)txtName).Value = "blah"; Here's a example that shows what you can do with a textbox and drop down list: Default.aspx <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="NoForm.Default" %> <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="NoForm.Default" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN""http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title></title> </head> <body> <form action="" method="post"> <label for="txtName">Name:</label> <input id="txtName" name="txtName" runat="server" /><br /> <label for="ddlState">State:</label> <select id="ddlState" name="ddlState" runat="server"> <option value=""></option> </select><br /> <input type="submit" value="Submit" /> </form> </body> </html> Default.aspx.cs using System; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; namespace NoForm { public partial class Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { //Default values string name = string.Empty; string state = string.Empty; if (Request.RequestType == "POST") { //If form submitted (post back) name = Request.Form["txtName"]; state = Request.Form["ddlState"]; //Server side form validation would go here //and actions to process form and redirect } ((HtmlInputText)txtName).Value = name; ((HtmlSelect)ddlState).Items.Add(new ListItem("ACT")); ((HtmlSelect)ddlState).Items.Add(new ListItem("NSW")); ((HtmlSelect)ddlState).Items.Add(new ListItem("NT")); ((HtmlSelect)ddlState).Items.Add(new ListItem("QLD")); ((HtmlSelect)ddlState).Items.Add(new ListItem("SA")); ((HtmlSelect)ddlState).Items.Add(new ListItem("TAS")); ((HtmlSelect)ddlState).Items.Add(new ListItem("VIC")); ((HtmlSelect)ddlState).Items.Add(new ListItem("WA")); if (((HtmlSelect)ddlState).Items.FindByValue(state) != null) ((HtmlSelect)ddlState).Value = state; } } } As you can see, you have similar functionality to ASP.NET server controls but more control over the final markup, and less overhead like ViewState and all the JavaScript ASP.NET adds. Interestingly you can also use HttpPostedFile to handle file uploads using your own input type="file" control (and necessary form enctype="multipart/form-data"). So my question is can you see any problems with this method, and any thoughts on it's usefulness? I have further details and tests on my blog.

Read the article

Computer Networks UNISA - Chap 8 – Wireless Networking

- by MarkPearl

After reading this section you should be able to Explain how nodes exchange wireless signals Identify potential obstacles to successful transmission and their repercussions, such as interference and reflection Understand WLAN architecture Specify the characteristics of popular WLAN transmission methods including 802.11 a/b/g/n Install and configure wireless access points and their clients Describe wireless MAN and WAN technologies, including 802.16 and satellite communications The Wireless Spectrum All wireless signals are carried through the air by electromagnetic waves. The wireless spectrum is a continuum of the electromagnetic waves used for data and voice communication. The wireless spectrum falls between 9KHZ and 300 GHZ. Characteristics of Wireless Transmission Antennas Each type of wireless service requires an antenna specifically designed for that service. The service’s specification determine the antenna’s power output, frequency, and radiation pattern. A directional antenna issues wireless signals along a single direction. An omnidirectional antenna issues and receives wireless signals with equal strength and clarity in all directions The geographical area that an antenna or wireless system can reach is known as its range Signal Propagation LOS (line of sight) uses the least amount of energy and results in the reception of the clearest possible signal. When there is an obstacle in the way, the signal may… pass through the object or be obsrobed by the object or may be subject to reflection, diffraction or scattering. Reflection – waves encounter an object and bounces off it. Diffraction – signal splits into secondary waves when it encounters an obstruction Scattering – is the diffusion or the reflection in multiple different directions of a signal Signal Degradation Fading occurs as a signal hits various objects. Because of fading, the strength of the signal that reaches the receiver is lower than the transmitted signal strength. The further a signal moves from its source, the weaker it gets (this is called attenuation) Signals are also affected by noise – the electromagnetic interference) Interference can distort and weaken a wireless signal in the same way that noise distorts and weakens a wired signal. Frequency Ranges Older wireless devices used the 2.4 GHZ band to send and receive signals. This had 11 communication channels that are unlicensed. Newer wireless devices can also use the 5 GHZ band which has 24 unlicensed bands Narrowband, Broadband, and Spread Spectrum Signals Narrowband – a transmitter concentrates the signal energy at a single frequency or in a very small range of frequencies Broadband – uses a relatively wide band of the wireless spectrum and offers higher throughputs than narrowband technologies The use of multiple frequencies to transmit a signal is known as spread-spectrum technology. In other words a signal never stays continuously within one frequency range during its transmission. One specific implementation of spread spectrum is FHSS (frequency hoping spread spectrum). Another type is known as DSS (direct sequence spread spectrum) Fixed vs. Mobile Each type of wireless communication falls into one of two categories Fixed – the location of the transmitted and receiver do not move (results in energy saved because weaker signal strength is possible with directional antennas) Mobile – the location can change WLAN (Wireless LAN) Architecture There are two main types of arrangements Adhoc – data is sent directly between devices – good for small local devices Infrastructure mode – a wireless access point is placed centrally, that all devices connect with 802.11 WLANs The most popular wireless standards used on contemporary LANs are those developed by IEEE’s 802.11 committee. Over the years several distinct standards related to wireless networking have been released. Four of the best known standards are also referred to as Wi-Fi. They are…. 802.11b 802.11a 802.11g 802.11n These four standards share many characteristics. i.e. All 4 use half duplex signalling Follow the same access method Access Method 802.11 standards specify the use of CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) to access a shared medium. Using CSMA/CA before a station begins to send data on an 802.11 network, it checks for existing wireless transmissions. If the source node detects no transmission activity on the network, it waits a brief period of time and then sends its transmission. If the source does detect activity, it waits a brief period of time before checking again. The destination node receives the transmission and, after verifying its accuracy, issues an acknowledgement (ACT) packet to the source. If the source receives the ACK it assumes the transmission was successful, – if it does not receive an ACK it assumes the transmission failed and sends it again. Association Two types of scanning… Active – station transmits a special frame, known as a prove, on all available channels within its frequency range. When an access point finds the probe frame, it issues a probe response. Passive – wireless station listens on all channels within its frequency range for a special signal, known as a beacon frame, issued from an access point – the beacon frame contains information necessary to connect to the point. Re-association occurs when a mobile user moves out of one access point’s range and into the range of another. Frames Read page 378 – 381 about frames and specific 802.11 protocols Bluetooth Networks Sony Ericson originally invented the Bluetooth technology in the early 1990s. In 1998 other manufacturers joined Ericsson in the Special Interest Group (SIG) whose aim was to refine and standardize the technology. Bluetooth was designed to be used on small networks composed of personal communications devices. It has become popular wireless technology for communicating among cellular telephones, phone headsets, etc. Wireless WANs and Internet Access Refer to pages 396 – 402 of the textbook for details.

Read the article

Project of Projects with team Foundation Server 2010

- by Martin Hinshelwood

It is pretty much accepted that you should use Areas instead of having many small Team Projects when you are using Team Foundation Server 2010. I have implemented this scenario many times and this is the current iteration of layout and considerations. If like me you work with many customers you will find that you get into a grove for how to set these things up to make them as easily understandable for everyone, while giving the best functionality. The trick is in making it as intuitive as possible for both you and the developers that need to work with it. There are five main places where you need to have the Product or Project name in prominence of any other value. Area Iteration Source Code Work Item Queries Build Once you decide how you are doing this in each of these places you need to keep to it religiously. Evan if you have one source code file to keep, make sure it is in the right place. This makes your developers and others working with the format familiar with where everything should go, as well as building up mussel memory. This prevents the neat system degenerating into a nasty mess. Areas Areas are traditionally used to separate out parts of your product / project so that you can see how much effort has gone into each. Figure: The top level areas are for reporting and work item separation There are massive advantages of using this method. You can: move work from one project to another rename a project / product It is far more likely that a project or product gets renamed than a department. Tip: If you have many projects, over 100, you should consider categorising them here, but make sure that the actual project name always sits at the same level so you know which is which. Figure: Always keep things that are the same at the same level Note: You may use these categories only at the Area/Iteration level to make it easier to select on drop down lists. You may not want to use them everywhere. On the other hand, for consistency it would be better to. Iterations Iterations are usually used to some sort of time based consideration. Here I am splitting into Iterations with periodic releases. Figure: Each product needs to be able to have its own cadence The ability to have each project run at its own pace and to enable them to have their own release schedule is often of paramount importance and you don’t want to fix your 100+ projects to all be released on the same date. Source Code Having a good structure for your source even if you are not branching or having multiple products under the same structure is always a good idea. Figure: Separate out your products source You need to think about both your branches as well as the structure of your source. All your code should be under “Source” and everything you need to build your solution including Build Scripts and 3rd party tools should be under your “Main” (branch) folder. This should them be branched by “Quality”, “Release” or both to get the most out of your branching structure. The important thing is to make sure you branch (or be able to branch) everything you need to build, test and deploy your application to an environment. That environment may be development, test or even production, but I can’t stress the importance of having everything your need. Note: You usually will not be able to install custom software on your build server. Store any *.dll’s or *.exe’s that you need under the “Tools\Tool1” folder. Note: Consult the Branching Guidance for Team Foundation Server 2010 for more on branching Figure: Adding category may be a necessary evil Even if you have to have a couple of categories called “Default”, it is better than not knowing the difference between a folder, Product and Branch. Work Item Queries Queries are used to load lists of Work Items out of TFS so you can see what work you have. This means that you want to also separate queries out by Product / project to make it easier to Figure: Again you have the same first level structure Having Folders also in Work Item Tracking we do the same thing. We put all the queries under a folder named for the Product / Project and change each query to have “AreaPath=[TeamProject]\[ProductX]” in the query instead of the standard “Project=@Project”. Tip: Don’t have a folder with new queries for each iteration. Instead have a single “Current” folder that has queries that point to the current iteration. Just change the queries as you move from one iteration to another. Tip: You can ctrl+drag the “Product1” folder to create your “Product2” folder. Builds You may have many builds both for individual products but also for different quality's. This can be further complicated by having some builds that action “Gated Check-In” and others that are specifically for “Release”, “Test” or another purpose. Figure: There are no folders, yet, for the builds so you need a good naming convention Its a pity that there are no folders under builds, some way to categorise would be nice. In lue of that at the moment you can use a functional naming convention that at least allows you to find what you want. Conclusion It is really easy to both achieve and to stick to this format if you take the time to do it. Unless you have 1000+ builds or 100+ Products you are unlikely run into any issues. Even then there are things you can do to mitigate the issues and I have describes some of them above. Let me know if you can think of any other things to make this easier.

Read the article

Visual Tree Enumeration

- by codingbloke

I feel compelled to post this blog because I find I’m repeatedly posting this same code in silverlight and windows-phone-7 answers in Stackoverflow. One common task that we feel we need to do is burrow into the visual tree in a Silverlight or Windows Phone 7 application (actually more recently I found myself doing this in WPF as well). This allows access to details that aren’t exposed directly by some controls. A good example of this sort of requirement is found in the “Restoring exact scroll position of a listbox in Windows Phone 7” question on stackoverflow. This required that the scroll position of the scroll viewer internal to a listbox be accessed. A caveat One caveat here is that we should seriously challenge the need for this burrowing since it may indicate that there is a design problem. Burrowing into the visual tree or indeed burrowing out to containing ancestors could represent significant coupling between module boundaries and that generally isn’t a good idea. Why isn’t this idea just not cast aside as a no-no? Well the whole concept of a “Templated Control”, which are in extensive use in these applications, opens the coupling between the content of the visual tree and the internal code of a control. For example, I can completely change the appearance and positioning of elements that make up a ComboBox. The ComboBox control relies on specific template parts having set names of a specified type being present in my template. Rightly or wrongly this does kind of give license to writing code that has similar coupling. Hasn’t this been done already? Yes it has. There are number of blogs already out there with similar solutions. In fact if you are using Silverlight toolkit the VisualTreeExtensions class already provides this feature. However I prefer my specific code because of the simplicity principle I hold to. Only write the minimum code necessary to give all the features needed. In this case I add just two extension methods Ancestors and Descendents, note I don’t bother with “Get” or “Visual” prefixes. Also I haven’t added Parent or Children methods nor additional “AndSelf” methods because all but Children is achievable with the addition of some other Linq methods. I decided to give Descendents an additional overload for depth hence a depth of 1 is equivalent to Children but this overload is a little more flexible than simply Children. So here is the code:- VisualTreeEnumeration public static class VisualTreeEnumeration { public static IEnumerable<DependencyObject> Descendents(this DependencyObject root, int depth) { int count = VisualTreeHelper.GetChildrenCount(root); for (int i = 0; i < count; i++) { var child = VisualTreeHelper.GetChild(root, i); yield return child; if (depth > 0) { foreach (var descendent in Descendents(child, --depth)) yield return descendent; } } } public static IEnumerable<DependencyObject> Descendents(this DependencyObject root) { return Descendents(root, Int32.MaxValue); } public static IEnumerable<DependencyObject> Ancestors(this DependencyObject root) { DependencyObject current = VisualTreeHelper.GetParent(root); while (current != null) { yield return current; current = VisualTreeHelper.GetParent(current); } } } Usage examples The following are some examples of how to combine the above extension methods with Linq to generate the other axis scenarios that tree traversal code might require. Missing Axis Scenarios var parent = control.Ancestors().Take(1).FirstOrDefault(); var children = control.Descendents(1); var previousSiblings = control.Ancestors().Take(1) .SelectMany(p => p.Descendents(1).TakeWhile(c => c != control)); var followingSiblings = control.Ancestors().Take(1) .SelectMany(p => p.Descendents(1).SkipWhile(c => c != control).Skip(1)); var ancestorsAndSelf = Enumerable.Repeat((DependencyObject)control, 1) .Concat(control.Ancestors()); var descendentsAndSelf = Enumerable.Repeat((DependencyObject)control, 1) .Concat(control.Descendents()); You might ask why I don’t just include these in the VisualTreeEnumerator. I don’t on the principle of only including code that is actually needed. If you find that one or more of the above is needed in your code then go ahead and create additional methods. One of the downsides to Extension methods is that they can make finding the method you actually want in intellisense harder. Here are some real world usage scenarios for these methods:- Real World Scenarios //Gets the internal scrollviewer of a ListBox ScrollViewer sv = someListBox.Descendents().OfType<ScrollViewer>().FirstOrDefault(); // Get all text boxes in current UserControl:- var textBoxes = this.Descendents().OfType<TextBox>(); // All UIElement direct children of the layout root grid:- var topLevelElements = LayoutRoot.Descendents(0).OfType<UIElement>(); // Find the containing `ListBoxItem` for a UIElement:- var container = elem.Ancestors().OfType<ListBoxItem>().FirstOrDefault(); // Seek a button with the name "PinkElephants" even if outside of the current Namescope:- var pinkElephantsButton = this.Descendents() .OfType<Button>() .FirstOrDefault(b => b.Name == "PinkElephants"); //Clear all checkboxes with the name "Selector" in a Treeview foreach (CheckBox checkBox in elem.Descendents() .OfType<CheckBox>().Where(c => c.Name == "Selector")) { checkBox.IsChecked = false; } The last couple of examples above demonstrate a common requirement of finding controls that have a specific name. FindName will often not find these controls because they exist in a different namescope. Hope you find this useful, if not I’m just glad to be able to link to this blog in future stackoverflow answers.

Read the article

How do you test an ICF based connector using Connector Facade Standalone?

- by Shashidhar Malyala

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The following code helps in writing a standalone java program to test an ICF based connector. The sample code in this example takes into account an ICF based flatfile connector. It is possible to test various operations like create, update, delete, search etc... It is also possible to set values to the connector configuration parameters, add/remove attributes and their values. public class FlatFile { private static final java.lang.String BUNDLE_NAME = "<PACKAGE_NAME>"; //Ex: org.info.icf.flatfile private static final java.lang.String BUNDLE_VERSION = "1.0.0"; private static final java.lang.String CONNECTOR_NAME = "org.info.icf.flatfile.FlatFileConnector"; // Name of connector class i.e. the class implemting the connector SPI operations public ConnectorFacade getFacade() throws IOException { ConnectorInfoManagerFactory fact = ConnectorInfoManagerFactory .getInstance(); File bundleDirectory = new File("<BUNDLE_LOCATION>"); //Ex: /usr/oracle/connector_bundles/ URL url = IOUtil.makeURL(bundleDirectory, "org.info.icf.flatfile-1.0.0.jar"); ConnectorInfoManager manager = fact.getLocalManager(url); ConnectorKey key = new ConnectorKey(BUNDLE_NAME, BUNDLE_VERSION, CONNECTOR_NAME); ConnectorInfo info = manager.findConnectorInfo(key); // From the ConnectorInfo object, create the default APIConfiguration. APIConfiguration apiConfig = info.createDefaultAPIConfiguration(); // From the default APIConfiguration, retrieve the // ConfigurationProperties. ConfigurationProperties properties = apiConfig .getConfigurationProperties(); // Print out what the properties are (not necessary) List propertyNames = properties.getPropertyNames(); for (String propName : propertyNames) { ConfigurationProperty prop = properties.getProperty(propName); System.out.println("Property Name: " + prop.getName() + "\tProperty Type: " + prop.getType()); } properties .setPropertyValue("fileLocation", "/usr/oracle/accounts.csv"); // Set all of the ConfigurationProperties needed by the connector. // properties.setPropertyValue("host", FOOBAR_HOST); // properties.setPropertyValue("adminName", FOOBAR_ADMIN); // properties.setPropertyValue("adminPassword", FOOBAR_PASSWORD); // properties.setPropertyValue("useSSL", false); // Use the ConnectorFacadeFactory's newInstance() method to get a new // connector. ConnectorFacade connFacade = ConnectorFacadeFactory.getInstance() .newInstance(apiConfig); // Make sure we have set up the Configuration properly connFacade.validate(); return connFacade; } public static void main(String[] args) throws IOException { FlatFile file = new FlatFile(); ConnectorFacade cfac = file.getFacade(); Set attrSet = new HashSet(); attrSet.add(AttributeBuilder.build(Name.NAME, "Test01")); attrSet.add(AttributeBuilder.build("FIRST_NAME", "Test_First")); attrSet.add(AttributeBuilder.build("LAST_NAME", "Test_Last")); //Create Uid uid = cfac.create(ObjectClass.ACCOUNT, attrSet, null); //Delete Uid uidP = new Uid("Test01"); cfac.delete(ObjectClass.ACCOUNT, uidP, null); } }

Read the article

ADF Business Components

- by Arda Eralp

ADF Business Components and JDeveloper simplify the development, delivery, and customization of business applications for the Java EE platform. With ADF Business Components, developers aren't required to write the application infrastructure code required by the typical Java EE application to: Connect to the database Retrieve data Lock database records Manage transactions ADF Business Components addresses these tasks through its library of reusable software components and through the supporting design time facilities in JDeveloper. Most importantly, developers save time using ADF Business Components since the JDeveloper design time makes typical development tasks entirely declarative. In particular, JDeveloper supports declarative development with ADF Business Components to: Author and test business logic in components which automatically integrate with databases Reuse business logic through multiple SQL-based views of data, supporting different application tasks Access and update the views from browser, desktop, mobile, and web service clients Customize application functionality in layers without requiring modification of the delivered application The goal of ADF Business Components is to make the business services developer more productive. ADF Business Components provides a foundation of Java classes that allow your business-tier application components to leverage the functionality provided in the following areas: Simplifying Data Access Design a data model for client displays, including only necessary data Include master-detail hierarchies of any complexity as part of the data model Implement end-user Query-by-Example data filtering without code Automatically coordinate data model changes with business services layer Automatically validate and save any changes to the database Enforcing Business Domain Validation and Business Logic Declaratively enforce required fields, primary key uniqueness, data precision-scale, and foreign key references Easily capture and enforce both simple and complex business rules, programmatically or declaratively, with multilevel validation support Navigate relationships between business domain objects and enforce constraints related to compound components Supporting Sophisticated UIs with Multipage Units of Work Automatically reflect changes made by business service application logic in the user interface Retrieve reference information from related tables, and automatically maintain the information when the user changes foreign-key values Simplify multistep web-based business transactions with automatic web-tier state management Handle images, video, sound, and documents without having to use code Synchronize pending data changes across multiple views of data Consistently apply prompts, tooltips, format masks, and error messages in any application Define custom metadata for any business components to support metadata-driven user interface or application functionality Add dynamic attributes at runtime to simplify per-row state management Implementing High-Performance Service-Oriented Architecture Support highly functional web service interfaces for business integration without writing code Enforce best-practice interface-based programming style Simplify application security with automatic JAAS integration and audit maintenance "Write once, run anywhere": use the same business service as plain Java class, EJB session bean, or web service Streamlining Application Customization Extend component functionality after delivery without modifying source code Globally substitute delivered components with extended ones without modifying the application ADF Business Components implements the business service through the following set of cooperating components: Entity object An entity object represents a row in a database table and simplifies modifying its data by handling all data manipulation language (DML) operations for you. These are basically your 1 to 1 representation of a database table. Each table in the database will have 1 and only 1 EO. The EO contains the mapping between columns and attributes. EO's also contain the business logic and validation. These are you core data services. They are responsible for updating, inserting and deleting records. The Attributes tab displays the actual mapping between attributes and columns, the mapping has following fields: Name : contains the name of the attribute we expose in our data model. Type : defines the data type of the attribute in our application. Column : specifies the column to which we want to map the attribute with Column Type : contains the type of the column in the database View object A view object represents a SQL query. You use the full power of the familiar SQL language to join, filter, sort, and aggregate data into exactly the shape required by the end-user task. The attributes in the View Objects are actually coming from the Entity Object. In the end the VO will generate a query but you basically build a VO by selecting which EO need to participate in the VO and which attributes of those EO you want to use. That's why you have the Entity Usage column so you can see the relation between VO and EO. In the query tab you can clearly see the query that will be generated for the VO. At this stage we don't need it and just use it for information purpose. In later stages we might use it. Application module An application module is the controller of your data layer. It is responsible for keeping hold of the transaction. It exposes the data model to the view layer. You expose the VO's through the Application Module. This is the abstraction of your data layer which you want to show to the outside word.It defines an updatable data model and top-level procedures and functions (called service methods) related to a logical unit of work related to an end-user task. While the base components handle all the common cases through built-in behavior, customization is always possible and the default behavior provided by the base components can be easily overridden or augmented. When you create EO's, a foreign key will be translated into an association in our model. It defines the type of relation and who is the master and child as well as how the visibility of the association looks like. A similar concept exists to identify relations between view objects. These are called view links. These are almost identical as association except that a view link is based upon attributes defined in the view object. It can also be based upon an association. Here's a short summary: Entity Objects: representations of tables Association: Relations between EO's. Representations of foreign keys View Objects: Logical model View Links: Relationships between view objects Application Model: interface to your application

Read the article

How do I organize a GUI application for passing around events and for setting up reads from a shared resource

- by Savanni D'Gerinel

My tools involved here are GTK and Haskell. My questions are probably pretty trivial for anyone who has done significant GUI work, but I've been off in the equivalent of CGI applications for my whole career. I'm building an application that displays tabular data, displays the same data in a graph form, and has an edit field for both entering new data and for editing existing data. After asking about sharing resources, I decided that all of the data involved will be stored in an MVar so that every component can just read the current state from the MVar. All of that works, but now it is time for me to rearrange the application so that it can be interactive. With that in mind, I have three widgets: a TextView (for editing), a TreeView (for displaying the data), and a DrawingArea (for displaying the data as a graph). I THINK I need to do two things, and the core of my question is, are these the right things, or is there a better way. Thing the first: All event handlers, those functions that will be called any time a redisplay is needed, need to be written at a high level and then passed into the function that actually constructs the widget to begin with. For instance: drawStatData :: DrawingArea -> MVar Core.ST -> (Core.ST -> SetRepWorkout.WorkoutStore) -> IO () createStatView :: (DrawingArea -> IO ()) -> IO VBox createUI :: MVar Core.ST -> (Core.ST -> SetRepWorkout.WorkoutStore) -> IO HBox createUI storeMVar field = do graphs <- createStatView (\area -> drawStatData area storeMVar field) hbox <- hBoxNew False 10 boxPackStart hbox graphs PackNatural 0 return hbox In this case, createStatView builds up a VBox that contains a DrawingArea to graph the data and potentially other widgets. It attaches drawStatData to the realize and exposeEvent events for the DrawingArea. I would do something similar for the TreeView, but I am not completely sure what since I have not yet done it and what I am thinking of would involve replacing the TreeModel every time the TreeView needs to be updated. My alternative to the above would be... drawStatData :: DrawingArea -> MVar Core.ST -> (Core.ST -> SetRepWorkout.WorkoutStore) -> IO () createStatView :: IO (VBox, DrawingArea) ... but in this case, I would arrange createUI like so: createUI :: MVar Core.ST -> (Core.ST -> SetRepWorkout.WorkoutStore) -> IO HBox createUI storeMVar field = do (graphbox, graph) <- createStatView (\area -> drawStatData area storeMVar field) hbox <- hBoxNew False 10 boxPackStart hbox graphs PackNatural 0 on graph realize (drawStatData graph storeMVar field) on graph exposeEvent (do liftIO $ drawStatData graph storeMVar field return ()) return hbox I'm not sure which is better, but that does lead me to... Thing the second: it will be necessary for me to rig up an event system so that various events can send signals all the way to my widgets. I'm going to need a mediator of some kind to pass events around and to translate application-semantic events to the actual events that my widgets respond to. Is it better for me to pass my addressable widgets up the call stack to the level where the mediator lives, or to pass the mediator down the call stack and have the widgets register directly with it? So, in summary, my two questions: 1) pass widgets up the call stack to a global mediator, or pass the global mediator down and have the widgets register themselves to it? 2) pass my redraw functions to the builders and have the builders attach the redraw functions to the constructed widgets, or pass the constructed widgets back and have a higher level attach the redraw functions (and potentially link some widgets together)? Okay, and... 3) Books or wikis about GUI application architecture, preferably coherent architectures where people aren't arguing about minute details? The application in its current form (displays data but does not write data or allow for much interaction) is available at https://bitbucket.org/savannidgerinel/fitness . You can run the application by going to the root directory and typing runhaskell -isrc src/Main.hs data/ or... cabal build dist/build/fitness/fitness data/ You may need to install libraries, but cabal should tell you which ones.

Read the article

Access Control Service v2: Registering Web Identities in your Applications [concepts]

- by Your DisplayName here!

ACS v2 support two fundamental types of client identities– I like to call them “enterprise identities” (WS-*) and “web identities” (Google, LiveID, OpenId in general…). I also see two different “mind sets” when it comes to application design using the above identity types: Enterprise identities – often the fact that a client can present a token from a trusted identity provider means he is a legitimate user of the application. Trust relationships and authorization details have been negotiated out of band (often on paper). Web identities – the fact that a user can authenticate with Google et al does not necessarily mean he is a legitimate (or registered) user of an application. Typically additional steps are necessary (like filling out a form, email confirmation etc). Sometimes also a mixture of both approaches exist, for the sake of this post, I will focus on the web identity case. I got a number of questions how to implement the web identity scenario and after some conversations it turns out it is the old authentication vs. authorization problem that gets in the way. Many people use the IsAuthenticated property on IIdentity to make security decisions in their applications (or deny user=”?” in ASP.NET terms). That’s a very natural thing to do, because authentication was done inside the application and we knew exactly when the IsAuthenticated condition is true. Been there, done that. Guilty ;) The fundamental difference between these “old style” apps and federation is, that authentication is not done by the application anymore. It is done by a third party service, and in the case of web identity providers, in services that are not under our control (nor do we have a formal business relationship with these providers). Now the issue is, when you switch to ACS, and someone with a Google account authenticates, indeed IsAuthenticated is true – because that’s what he is! This does not mean, that he is also authorized to use the application. It just proves he was able to authenticate with Google. Now this obviously leads to confusion. How can we solve that? Easy answer: We have to deal with authentication and authorization separately. Job done ;) For many application types I see this general approach: Application uses ACS for authentication (maybe both enterprise and web identities, we focus on web identities but you could easily have a dual approach here) Application offers to authenticate (or sign in) via web identity accounts like LiveID, Google, Facebook etc. Application also maintains a database of its “own” users. Typically you want to store additional information about the user In such an application type it is important to have a unique identifier for your users (think the primary key of your user database). What would that be? Most web identity provider (and all the standard ACS v2 supported ones) emit a NameIdentifier claim. This is a stable ID for the client (scoped to the relying party – more on that later). Furthermore ACS emits a claims identifying the identity provider (like the original issuer concept in WIF). When you combine these two values together, you can be sure to have a unique identifier for the user, e.g.: Facebook-134952459903700\799880347 You can now check on incoming calls, if the user is already registered and if yes, swap the ACS claims with claims coming from your user database. One claims would maybe be a role like “Registered User” which can then be easily used to do authorization checks in the application. The WIF claims authentication manager is a perfect place to do the claims transformation. If the user is not registered, show a register form. Maybe you can use some claims from the identity provider to pre-fill form fields. (see here where I show how to use the Facebook API to fetch additional user properties). After successful registration (which may include other mechanisms like a confirmation email), flip the bit in your database to make the web identity a registered user. This is all very theoretical. In the next post I will show some code and provide a download link for the complete sample. More on NameIdentifier Identity providers “guarantee” that the name identifier for a given user in your application will always be the same. But different applications (in the case of ACS – different ACS namespaces) will see different name identifiers. This is by design to protect the privacy of users because identical name identifiers could be used to create “profiles” of some sort for that user. In technical terms they create the name identifier approximately like this: name identifier = Hash((Provider Internal User ID) + (Relying Party Address)) Why is this important to know? Well – when you change the name of your ACS namespace, the name identifiers will change as well and you will will lose your “connection” to your existing users. Oh an btw – never use any other claims (like email address or name) to form a unique ID – these can often be changed by users.

Read the article

Battery life starts at 2:30 hrs (99%), but less than 1 minute later is only 1:30 hrs (99%)

- by zondu

After searching this and other forums, I haven't seen this same issue listed anywhere for Ubuntu 12. Prior to installing Ubuntu 12.10, my Netbook (Acer AspireOne D250, SATA HDD) was consistently getting 2:30-3 hrs battery life under Windows XP Home, SP3. However, immediately after installing Ubuntu 12.10, the battery life starts out at 2:30 hrs (99%), but less than 1 minute later suddenly drops to 1:30 hrs (99%), which seems very odd. It could be a complete coincidence that the battery is suddenly flaky at the exact same moment that Ubuntu 12.10 was installed, but that doesn't seem likely. I'm a newbie to Ubuntu, so I don't have much experience tweaking/trouble-shooting yet. Here's what I've tried so far: enabled laptop mode (sudo su, then echo 5 /proc/sys/vm/laptop_mode) and checked that it is running when the A/C adapter is unplugged, but it doesn't seem to have made any noticeable difference in battery life, installed Jupiter, but it didn't work and messed up the system, so I had to uninstall it, disabled bluetooth (wifi is still on b/c it is necessary), set the screen to lowest brightness, etc., run through at least 1 full power cycle (running until the netbook shut itself off due to critical battery) and have been using it normally (sometimes plugged in, often unplugged until the battery gets very low) for a week since installing Ubuntu 12.10. installed powertop, but have no idea how to interpret its results. Here are the results of acpi -b: w/ A/C adapter: Battery 0: Full, 100% immediately after unplugging: Battery 0: Discharging, 99%, 02:30:20 remaining 1 minute after unplugging: Battery 0: Discharging, 99%, 01:37:49 remaining 2-3 minutes after unplugging: Battery 0: Discharging, 95%, 01:33:01 remaining 10 minutes after unplugging: Battery 0: Discharging, 85%, 01:13:38 remaining Results of cat /sys/class/power_supply/BAT0/uevent: w/ A/C adapter: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Full POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=12136000 POWER_SUPPLY_CURRENT_NOW=773000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1956000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= immediately after unplugging: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11886000 POWER_SUPPLY_CURRENT_NOW=773000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1937000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 1 minute later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11728000 POWER_SUPPLY_CURRENT_NOW=1174000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1937000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 2-3 minutes later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11583000 POWER_SUPPLY_CURRENT_NOW=1209000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1878000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 10 minutes later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11230000 POWER_SUPPLY_CURRENT_NOW=1239000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1644000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= Results of upower -i /org/freedesktop/UPower/devices/battery_BAT0: w/ A/C adapter: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:24:58 2012 (823 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: fully-charged energy: 21.1248 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 8.3484 W voltage: 12.173 V percentage: 100% capacity: 43.4667% technology: lithium-ion immediately after unplugging: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:41:25 2012 (1 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.9196 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 8.3484 W voltage: 11.86 V time to empty: 2.5 hours percentage: 99.0286% capacity: 43.4667% technology: lithium-ion History (charge): 1354023683 99.029 discharging 1 minute later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:42:31 2012 (17 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.9196 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.5432 W voltage: 11.753 V time to empty: 1.5 hours percentage: 99.0286% capacity: 43.4667% technology: lithium-ion History (charge): 1354023683 99.029 discharging History (rate): 1354023751 13.543 discharging 2-3 minutes later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:45:06 2012 (20 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.2824 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.7484 W voltage: 11.545 V time to empty: 1.5 hours percentage: 96.0123% capacity: 43.4667% technology: lithium-ion History (charge): 1354023906 96.012 discharging 1354023844 97.035 discharging History (rate): 1354023906 13.748 discharging 1354023875 12.992 discharging 1354023844 13.284 discharging 10 minutes later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:54:24 2012 (28 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 18.1764 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.2948 W voltage: 11.268 V time to empty: 1.4 hours percentage: 86.0429% capacity: 43.4667% technology: lithium-ion History (charge): 1354024433 86.043 discharging History (rate): 1354024464 13.295 discharging 1354024433 13.662 discharging 1354024402 13.781 discharging I noticed that between #2 and #3 (0 and 1 minutes after unplugging), while the battery still reports 99% charge and drops from 2:30 hr to 1:30 hr, the energy usage goes from 8.34 W to 13.54 W and the current_now increases, but shouldn't it be using less energy in battery mode since the screen is much dimmer and it's in power saving mode? (or is that normal behavior?) It also seems to drain more quickly than what it predicts, especially with the 1-1.25 hour drop in the first minute of being unplugged, which seems odd. What really concerns me is that Ubuntu 12.10 may not be properly managing the battery (with the sudden change in charge/life from 2:30 to 1:30 or 1:15 within a minute of unplugging), and that a new battery may quickly die under Ubuntu 12.10. I'd greatly appreciate any advice/suggestions on what to do, and especially whether there's a way to get back the 1-1.5 hrs of battery life that were suddenly lost when changing from WinXp to Ubuntu 12.10. Thanks :)

Search Results

Search found 5457 results on 219 pages for 'necessary'.

Page 186/219 | < Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193 | Next Page >

- by Pinal Dave

- by DigiMortal

- by Daniel Moth

- by Holly

- by Brian

- by Holly

- by Kellsey Ruppel

- by chlander

- by Ashok_Ora

- by Dave Campbell

- by Luke San Antonio

- by Richard Lefebvre

- by pinaldave

- by Kyle Burns

- by Christian Basar

- by John

- by MarkPearl

- by Martin Hinshelwood

- by codingbloke

- by Shashidhar Malyala

- by Arda Eralp

- by Savanni D'Gerinel

- by Your DisplayName here!

- by zondu

< Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193 | Next Page >