Search Results

Search found 17314 results on 693 pages for 'vpn setup'.

Page 186/693 | < Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >

• Connecting to an Amazon AWS database [closed]

  - by Adel

  so I'm a bit overwhelmed/bewildered by the whole concept of networking/remote-desktop , etc. The context is that - in my company I need to access a remote database. The standard way I use is to first connect using a VPN-Client( called Shrew Soft Access manager), then once that says: "network device configured tunnel enabled" I'm good to connect using windows "Remote Desktop Connection" . But now our company set up an Amazon AWS database, and I'm told I need to connect, and I ony need to use RDP. So I tried the standard windows one - but it doesn't work. On wikipedia , I looked up remote desktop sftware and downloaded one called VNC Viewer. but it doesn't work. Any advice/tips/comments appreciated EDIT: YAYA! I finally got a little more connected . I had to use my username as a fully qualified name: Computer: XYZ.XYZ.XYZ.XYZ USERNAME: XYZ.XYZ.XYZ.XYZ\aazzam

  Read the article

• SSH Tunnel for Remote Desktop via Intermediary Server

  - by Mihai Todor

  I've seen many examples of SSH tunnels on the nets, but I'm still having no luck with this. Here's the setup: Windows 7 PC in a private network, sitting behind a firewall, with PowerShellInsider SSH server set up and working fine. Public access Linux server, which has access to the PC. Windows 7 laptop, at home, from which I wish to do remote desktop on the PC. Now, here's what I've tried so far: SSH tunnel from my laptop to the Linux server: ssh -f my_user@LINUX_SERVER -L 6666:LINUX_SERVER_IP:6666 -N SSH to the Linux server where I've set up a tunnel to the PC: ssh -f 'PRIVATE_DOMAIN\my_user'@PC_NAME -L 6666:PC_IP:3389 -N Unfortunately, I must be doing something wrong, because it doesn't seem to work. Any ideas why or, at least, any suggestions on how can I try to debug this setup? At the moment, I have access to all 3 machines (non-root on Linux), so I can test whatever I want...

  Read the article

• What partition to use to keep data files in Ubuntu?

  - by Martin Lee

  I have been using Ubuntu for a few years and usually my partition set up was the following: Ext3 or Ext4 partition for the system itself (20 GB); A 10 GB swap partition; a big FAT32 partition to store movies, photos, work stuff, etc. (depends on the capacity of the disk, but usually it is what is left from Ext3+Swap, currently it is more than 200 GB). Does this setup sound right? I am considering to switching to one big Ext3 partition now, because the problem with Fat32 in Ubuntu has not gone anywhere: for example, right now I can access my 'big' partition with a 'Data' label only through /media/_themes?END. Pretty strange name for a partition, isn't it? some Linux software fail to read/write on this partition. For example, if I want to play around with rebar and build/make/compile things on this FAT32 partition, it will always complain about permissions and won't work (the same goes for many other kinds of software); it is not stable, I can not refer to some files on this FAT32 partition, because after the next reboot it will be called not '_themes?END', but something else. On the other side I usually begin to run out of space on the Ext3 partition after a few months of usage. So, the question is - what is the best setup of partitions for an Ubuntu system? Should a FAT32 partition be used at all?

  Read the article

• Unable to PPTP through NAT on Cisco 881

  - by MasterRoot24

  I'm trying to connect to a PPTP server which is sat behind a Cisco 881 NAT router. The server is running Ubuntu Server 12.04 and is running Poptop pptpd as the PPTP daemon listening for connections. As discussed in my other question, I'm trying to setup a Cisco 881 router to replace my old Linksys WAG320N. This same server and WAN connection worked fine with the WAG320N with no special configuration, other than allowing 1723 in through the firewall. On the Cisco 881, I'm using the newer ip nat enable or NAT NVI to setup static routes in through the firewall for the services running behind the router. My reason being that I can't run another copy of my live DNS domains internally with local IP addresses in. For the purposes of this question, though, I have rebuilt the router with ip nat inside/outside style NAT'ing, but this issue is still apparent. HTTP/SMTP/IMAP etc. all work ok from both the WAN and LAN interfaces of the router. I'm only having issues with SIP (see other question) and PPTP. My issue is that the GRE doesn't appear to be passing through NAT correctly and one end of the connection is not receiving GRE traffic when it should be, so the server hangs up the connection. Here's an example of /var/log/syslog with debug enabled in /etc/pptpd.conf: Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: MGR: Launching /usr/sbin/pptpctrl to handle client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pppd options file = /etc/ppp/pptpd-options Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection started Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 1) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a START CTRL CONN RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 156 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 7) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Set parameters to 100000000 maxbps, 64 window size Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a OUT CALL RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Starting call (launching pppd, opening GRE) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pty_fd = 6 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: tty_fd = 7 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 32 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): program binary = /usr/sbin/pppd Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Dec 11 21:06:30 <HOSTNAME> pppd[22627]: pppd 2.4.5 started by root, uid 0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Using interface ppp0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Connect: ppp0 <--> /dev/pts/3 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: GRE: Bad checksum from pppd. Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 15) Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Got a SET LINK INFO packet with standard ACCMs Dec 11 21:07:00 <HOSTNAME> pppd[22627]: LCP: timeout sending Config-Requests Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Connection terminated. Dec 11 21:07:00 <HOSTNAME> avahi-daemon[1042]: Withdrawing workstation service for ppp0. Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Modem hangup Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Exit. Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: GRE: read(fd=6,buffer=6075a0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Reaping child PPP[22627] Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection finished Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Exiting now Dec 11 21:07:00 <HOSTNAME> pptpd[5803]: MGR: Reaped child 22626 As far as Cisco are concerned, all I need is ip nat source static tcp <SERVER LAN IP> 1723 interface FastEthernet4 1723 but of course this doesn't seem to the be helping the GRE traffic through as it should. Trying the connection to the LAN IP of the server from the same LAN as the server (behind the router), the PPTP connection works fine, so I'm confident that the server's config is ok. Furthermore, all I needed on my WAG320N was to open 1723 in the firewall. Here's my current router config: ! ! Last configuration change at 20:20:15 UTC Tue Dec 11 2012 by xxx version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xxx ! boot-start-marker boot-end-marker ! ! enable secret 4 xxxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 xxx quit ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! ip domain list dmz.xxx.local ip domain list xxx.local ip domain name dmz.xxx.local ip name-server 192.168.1.x ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn xxx ! ! username admin privilege 15 secret 4 xxx username joe secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.x 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ! ! ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ! ! access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.1.0 0.0.0.255 ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 exec-timeout 15 0 login authentication local_auth line aux 0 exec-timeout 15 0 login authentication local_auth line vty 0 4 access-class 2 in login authentication local_auth length 0 transport input all ! ! end UPDATE 16/12/2012: The only progress that I have been able to make on this issue is that I'm confident that the issue is caused by the GRE tunnels (which are required for the PPTP connection to complete) are being blocked. When attempting a connection, I can see in show ip nat nvi translations that both a TCP translation on 1723 is setup and also a GRE translation is setup also. I appear to be able to see GRE related packets on the LAN that the server is on, so I am lead to believe that the server is sending(?) GRE packets, however running Wireshark on a client PC when attempting a connection shows absolutely no GRE packets. Whilst there are no configuration directives in my config posted above (that I can pin point) which would specifically block them, it would appear that the GRE packets are not being allowed in/out of the router's firewall, even though a NAT translation entry is setup to the server's LAN address. Would anyone be able to provide me with some help to ensure that GRE packets are not blocked by the router's firewall, so that this can be ruled out as a possible issue please?

  Read the article

• Apache NameVirtualHost on port 443 ignores ServerAlias

  - by Ryan

  I've got a name-based virtual host setup on port 443 such that requests on host 'apple.fruitdomain' are proxied to the apple-app and requests on host 'orange.fruitdomain' are proxied to orange-app. This is working, but I'd like to add a ServerAlias for each such that requests on host 'apple' are proxied to apple-app and requests on host 'orange' are proxied to the orange-app. If I simply add a ServerAlias directive to the virtual host it doesn't work. ssl.conf below: Listen 443 NameVirtualHost *:443 <VirtualHost *:443> ServerName apple.fruitdomain ServerAlias apple SSLProxyEngine on ProxyPass /apple-app https://localhost:8181/apple-app ProxyPassReverse /apple-app https://localhost:8181/apple-app ... </VirtualHost> <VirtualHost *:443> ServerName orange.fruitdomain ServerAlias orange SSLProxyEngine on ProxyPass /orange-app https://localhost:8181/orange-app ProxyPassReverse /orange-app https://localhost:8181/orange-app ... </VirtualHost> Interestingly if I do a similar setup but with port 80 then the ServerAlias works...

  Read the article

• How to get HTTP preseed to work correctly on Ubuntu 10.04 LTS (Lucid)?

  - by netvope

  Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What is the correct boot parameters for launching such an installation? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct.

  Read the article

• MWS2K8R2: Enabling Media Sharing using Streaming Media Services Role

  - by TheLizardKing

  So I have a Microsoft Windows Server 2008 R2 that stores a large collection of media (mostly mp3s) and I want to be able to deliver these files using a server/client setup with Windows Media Player being the client. I downloaded and installed Streaming Media Services Role. I even setup a publishing point with on-demand access. My issue is I can connect using WMP12 but it only connects as more of a stream and not a shared library. I can pause/play/skip as if it's a powerful radio station which is ok in my book but what I'd really like to do is allow me to control my music remotely, search and play for artists, maybe create playlists (not required but nice) and even connect it to an xbox. Is Streaming Media Services Role not what I should be using for this? Would installing WMP and sharing using that mechanism be a better option? Any Ideas?

  Read the article

• OSX Parallels 5 - can't share internet connection when using host-only networking...

  - by Steve Kirtley

  I've just upgraded from Parallels 3 to Parallels 5, but am having a problem matching my previous configuration. I am a web developer so run a local web server on my mac. I used to allow access to this from the virtual machines in Parallels by using 'Host-Only Networking' and then in OSX enabling internet sharing from my wifi/ethernet to the virtual ethernet ports that Parallels created. The setup was based on: http://www.craigfrancis.co.uk/features/setup/parallels/ The new version of Parallels doesn't create any network adaptors that are available for internet sharing in OSX - just VNIC's which only show under an ifconfig... Can anyone suggest how to make this all play nice? Thanks in advance! Steve

  Read the article

• Intel graphic chipset and NVIDIA Geforce GTX560

  - by antoine

  I have an NVIDIA Geforce GTX560 with two video projectors and I would like to use the onboard Intel Graphic Chipset to plug an additional monitor. I saw the question : How can I use both Intel onboard and Nvidia graphics at the same time? but the answer is so short that I was not convinced. My motherboard (GIGABYTE GA-H61M-D2P-B3 (rev. 1.0)) equipped with Intel H61 Chipset allow shared memory between onboard and PCIe cards. And Windows 7 allow me to use the three outputs thanks to Intel's driver. I'm able to use the onboard graphic card but without graphical interface for now. I think i need intel driver for that. But I would like to know if I can setup my displays in xorg.conf with something like : Section "Device" Identifier "Device0" Driver "intel" EndSection Section "Device" Identifier "Device1" Driver "nvidia" EndSection Section "Device" Identifier "Device2" Driver "nvidia" EndSection Does anyone have successfully setup something like that ? Or should I burn my head experimenting it by myself ? Or is there any good reasons to discouraged me to try ? Thanks for your help. Antoine PS : i'm using Ubuntu 10.10 for now, but I could switch to another version. PS2 : i also read this : Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10? which doesn't tell me more about the possibilities to use Intel Graphic and Nvidia at the same time EDIT : according to that : Can not get Dual Monitors to work on Different GPUs, I should be able to run two Xserver one on Intel the other on Nvidia. I will try and post the result here.

  Read the article

• Get/Assign IP addresses assigned by the DHCP sever with DLink switches in between

  - by Ranjith Kumar

  In our office the setup is like we have a UBUNTU server with DHCP Server connected to all the PCS via 24 port and 8 port DLink switches. How can I find all the PCS(with client name, ip and mac address)in the network?? When I do "vi /var/lib/dhcp3/dhcpd.leases", I get all the ip addresses for the switches. I have used "arp-scan --interface=eth0 --localnet" to get all the IPs and MAC Addresses in my local network. I couldn't find any option to diplay client name. Also I would like to assign particular IP for a particular PC. I have done the changes in the dhcp.conf file but it is not working as they are not directly connected to DHCP-server(DLink switches in between). How can I assign IPs for PCs in this kind of setup. Thanks in advance

  Read the article

• Setting DNS suffix for multiple network adapters in a VM

  - by arun_bh

  Is there a way to set the DNS Suffix for multiple network adapters in a VM using the sysprep file? We are trying to setup Windows 2003 VMs with 2 network adapters. In the one adapter case the sysprep we are able to set the suffix using DNSDomain. But this doesnt work in the 2 adapter case. The The VM is setup corrently though without any issues but one of our apps relies on the DNS Suffix value to work correctly. Thanks in advance.

  Read the article

• Unable to access any ubuntu shares from android/windows clients

  - by dan

  I am running Ubuntu 11.04, and cant seem to access any of my shares. Here is the output from testparm-s : Load smb config files from /etc/samba/smb.conf rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Processing section "[printers]" Processing section "[CanonMG2100AIO]" Processing section "[FreeAgent Drive]" Loaded services file OK. WARNING: You have some share names that are longer than 12 characters. These may not be accessible to some older clients. (Eg. Windows9x, WindowsMe, and smbclient prior to Samba 3.0.) Server role: ROLE_STANDALONE [global] server string = %h server (Samba, Ubuntu) encrypt passwords = No obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = Enter\snew\s\spassword:* %n\n Retype\snew\s\spassword:* %n\n password\supdated\ssuccessfully . username map = /etc/samba/smbusers unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 name resolve order = wins lmhosts host bcast dns proxy = No wins support = Yes usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d [printers] comment = All Printers path = /var/spool/samba create mask = 0700 guest ok = Yes printable = Yes browseable = No [CanonMG2100AIO] comment = Printer Drivers path = /var/lib/samba/printers read only = No guest ok = Yes [FreeAgent Drive] path = /media/FreeAgent Drive read only = No guest ok = Yes smbtree: Server requested plaintext password but 'client plaintext auth' is disabled anonymous failed session setup with NT_STATUS_INVALID_PARAMETER Server requested plaintext password but 'client plaintext auth' is disabled anonymous failed session setup with NT_STATUS_INVALID_PARAMETER and hostname: dekstop I know the spelling of desktop is incorrect. it was a duh moment. Any help would be greatly appreciated.

  Read the article

• Block P2P traffic on a Linksys router WRT54G with Tomato firmware

  - by Kami

  I'm running a small wireless network (6 to 10 users) on a Linksys WRT54G with Tomato firmware sharing an Internet connection. I don't want the users to download files with BitTorrent (mainly used) and other P2P apps. I've also found some solutions about lowering P2P traffic priority using QoS. I really need to ban P2P traffic. Does anyone know how to setup some rules to deny that kind of traffic? I've tried to setup an Access Restriction Rule: However it's not working at all.

  Read the article

• Unable to mount NTFS Partition after resizing

  - by sam

  I was having only 15 GB space allocated to LINUX. I wanted to have more space available to linux. So I just re sized one of my ntfs partition using GParted. But after resizing I am not able to open the partition neither in Ubuntu nor in windows. OS: Dual Boot Win7/Ubuntu 10.10 The error message i get is the following: Error mounting: mount exited with exit code 12: Failed to read last sector (395458824): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

  Read the article

• Can't change settings for Mobile Broadband Dongle - Button is greyed out

  - by Ross LIndsey

  I was with VirginBroadband.com.au (Australia). My huawai 3G Dongle was working great on Ubuntu, However I have changed ISP's. I unlocked the modem, and put in the new SIM. I have tested this in my Windows PC and it connects to the new (Optus) Network A-OK and it all works. When I put this dongle (the same one that was working fine in Ubuntu) into that same Ubuntu Netbook it simply won't connect. When I try to go into the dialog to try and add or change settings the button to change or update settings is greyed out, I can't select it. Apparently since this dongle was already recognized the Broadband Setup Wizard won't start, and I have no idea how to get it to start (presuming it has the ability to configure an already recognized dongle). What do I have to do to either enable the ability to change the configuration for this setup, or to blow away the one that is set up so the Broadband Wizard will re-start and let me configure a new one. Can anyone provide simple instructions for doing this? I'm using Ubuntu with the Cinnamon Desktop

  Read the article

• Multiplayer game communication framework for mac/ios

  - by ishaq

  (Cross post from stackoverflow) I am creating a multiplayer 2D game for Mac and iOS devices. I'll be using cocso2d for graphics/game engine, however I am largely blank on what to use for multiplayer communication. Please note that I cannot use central severs e.g. SmartFox, RedDwarf, etc since I want the players to "host" games for others and be able to play it on their LAN, VPN or my own servers. Any pointers? I checked lidgren but it's for .NET only and hence not an option for me. EDIT: just in case it wasn't clear, the messaging has to be real time hence it's probably going to be over UDP

  Read the article

• SHH Tunnel for Remote Desktop via Intermediary Server

  - by Mihai Todor

  I've seen many examples of SSH tunnels on the nets, but I'm still having no luck with this. Here's the setup: Windows 7 PC in a private network, sitting behind a firewall, with PowerShellInsider SSH server set up and working fine. Public access Linux server, which has access to the PC. Windows 7 laptop, at home, from which I wish to do remote desktop on the PC. Now, here's what I've tried so far: SSH tunnel from my laptop to the Linux server: ssh -f my_user@LINUX_SERVER -L 6666:LINUX_SERVER_IP:6666 -N SSH to the Linux server where I've set up a tunnel to the PC: ssh -f 'PRIVATE_DOMAIN\my_user'@PC_NAME -L 6666:PC_IP:3389 -N Unfortunately, I must be doing something wrong, because it doesn't seem to work. Any ideas why or, at least, any suggestions on how can I try to debug this setup? At the moment, I have access to all 3 machines (non-root on Linux), so I can test whatever I want...

  Read the article

• Can I change the image associated with my computer when it's sharing as a media server?

  - by animuson

  I currently have my computer setup to share its videos, music, and pictures as a media server so I can easily access all of my stuff from my PS3 and play it on my TV (since I can't connect my computer directly to my TV). However, my dad also has his laptop setup as a media server, for whatever reason, and both of them use the same "Windows Media Player" icon in the list. It's not a huge issue, but I was wondering if it was possible to somehow change what icon gets sent out by your computer to other devices when it's acting as a media server, and how?

  Read the article

• How to automatically show USB camera or memory stick contents in Icewm?

  - by darenw

  I normally use a very lightweight Linux setup. No desktop like Gnome or KDE, just Icewm as the windows manager and nothing else that normal users might consider essential. Well, I do need a file manager - I use Thunar. Recently I've been trying Gnome. Whenever I shove a memory stick into a USB port, or connect my digital camera, it can automatically pop up a file manager showing all the goodies on that device. KDE does this too. I like this. Although quick at the command line, I like not having to go sudo to mount the device and all that. If I want to stick with a lightweight setup using Icewm+Thunar, is there something non-huge I can install to make external devices fire up a Thunar window, or otherwise make access to the contents brainlessly easy?

  Read the article

• Smart subdomain routing via reverse proxy

  - by Trevor Hartman

  I have two servers on my home network: OSX Server and an Ubuntu Server. I'd love to have external subdomains osx.mydomain.com point to osx and ubuntu.mydomain.com point to ubuntu. I know the normal way to do this is to have a static external IP address for each, but that's not an option as this is just my home setup. My question is: is there a way to do this with some reverse proxy trickery? OSX is currently the default entry point for all traffic. I was able to setup a reverse proxy on OSX for ubuntu.mydomain.com on port 80, so web traffic was correctly being proxied to my ubuntu. I'd like to ssh and do a bunch of other stuff though!

  Read the article

• Page not found in browsers

  - by Chetan

  I'm using ubuntu 12.04.1, last upgraded from 12.04 I'm using mts mblaze to access internet. Two days ago, I was using vpn on my system, suddenly cisco disconnected & my system hung while I was accessing my office system. I didnt' have any other idea, so I forcibly shut down the system. After that, connection is made, but firefox or chromium both don't find any page. I think there's some problem with the system package. Please let me know a good solution. Regards, Chetan

  Read the article

• squid transparent proxy on all ports

  - by Yves Richard

  I have setup squid as a transparent proxy by redirecting port 80 to the native squid port 3128. I know there are issues with getting secure ports like ssl and imaps to go though the proxy but can I redirect all other ports through the proxy as well. I am trying to get a better idea of bandwidth usage. I have setup iptables to log usage and i am getting most traffic going into the related/established rule. I am trying to determine the origins of this traffic by sending traffic to squid for more detailed logging.

  Read the article

• Script Task/Component and Template Information

  The Script Task and Script component are often used by people developing SSIS packages because they are easy to use and now because SSIS could be perceived to be more developer friendly they are very powerful. That being said we should no be using them everywhere.  There are generally Tasks/Components already provided that will do the job it may be that we have to rethink the way we want to draw our package. I had cause last week to break out the script component in SQL Server 2008 SP1 and found that it was broken.  I don’t know when it broke as I do not use them all that often.  My error was as below.     Something must have overwritten this template information.  I looked in Event Viewer and tried the things it suggested but the templates still did not work.  Here is how I got them eventually to work for me (Your Mileage may vary) Open up a Command Prompt window using an administrator level account and “as an administrator” vsta.exe /hostid SSIS_ScriptTask /setup vsta.exe /hostid SSIS_ScriptComponent /setup   This worked for me.  Hope it helps.

  Read the article

• VMWare Hypervisor vSphere 5 - VM static ip from VLAN NAT

  - by Ian Livingstone

  I have a VMWare vSphere 5 Hypervisor server that has a static ip address assigned to it by VLAN that is configured to perform NAT. The static IP is assigned to the bare metal server via the NIC's mac address. I want to setup a guest machine to also have a static ip address, how can I go about having this setup? I have assigned a IP for the guest's MAC Address but it doesn't seem to be working as when I ping the ip address it does not respond. The guest is running ubuntu 10.04 server edition. I am trying to assign it a static public ip address. Any help would be greatly appreciated.

  Read the article

• StreamInsight Now Available Through Microsoft Update

  - by Roman Schindlauer

  We are pleased to announce that StreamInsight v1.1 is now available for automatic download and install via Microsoft Update globally. In order to enable agile deployment of StreamInsight solutions, you have asked of us a steady cadence of releases with incremental, but highly impactful features and product improvements. Following our StreamInsight 1.0 launch in Spring 2010, we offered StreamInsight 1.1 in Fall 2010 with implicit compatibility and an upgraded setup to support side by side installs. With this setup, your applications will automatically point to the latest runtime, but you still have the choice to point your application back to a 1.0 runtime if you choose to do so. As the next step, in order to enable timely delivery of our releases to you, we are pleased to announce the support for automatic download and install of StreamInsight 1.1 release via Microsoft Update starting this week. If you have a computer: that is subscribed to Microsoft Update (different from Windows Update) has StreamInsight 1.0 installed, and does not yet have StreamInsight 1.1 installed, Microsoft Update will automatically download and install the corresponding StreamInsight 1.1 update side by side with your existing StreamInsight 1.0 installation – across all supported 32-bit and 64-bit Windows operating systems, across 11 supported languages, and across StreamInsight client and server SKUs. This is also supported in WSUS environments, if all your updates are managed from a corporate server (please talk to the WSUS administrator in your enterprise). As an example, if you have SI Client 1.0 DEU and SI Server 1.0 ENU installed on the same computer, Microsoft Update will selectively download and side-by-side install just the SI Client 1.1 DEU and SI Server 1.1 ENU releases. Going forward, Microsoft Update will be our preferred mode of delivery – in addition to support for our download sites, and media based distribution where appropriate. Regards, The StreamInsight Team

  Read the article

< Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >