Search Results

Search found 6436 results on 258 pages for 'el quick'.

Page 187/258 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

• Hyper-V 2008 R2 synthetic networking stops working with linux 2.6.32.15

  - by luxifer

  Hi there, so I thought I'd give Hyper-V on Windows Server 2008 R2 Enterprise a try on my Homeserver (yes, it's legit... got it from msdnaa). First thing to throw at it was my firewall which runs IPFire. This distribution currently uses the kernel version 2.6.32.15 and comes with the Hyper-V drivers. So I enabled them and at first they work just fine but after a few minutes they just fail. There are no packages going in or out anymore until I reboot the VM but sometimes even that won't work so the VM just keeps "Stopping" like forever. Emulated networking works fine but it slow and uses more CPU. That way my firewall routes slower than when running under virtualbox on an atom N270. My server has an E6750; VM is limited to 25%, but that should still outperform this atom CPU especially since it's never going anywhere near 100% CPU load, so give me a break! A quick google search led me to people having the same problem (even with other distributions and kernel versions that include those drivers) but no solution yet... I already found this but I can't quite follow the author on the part where he solved the issue - especially since I need two virtual nics for my firewall distro to work (obviously one internal and one external) What am I missing here?

  Read the article

• Apache2 Segmentation fault with wsgi_module

  - by a coder

  Apache 2.2.3 is running as an existing web server under RHEL 5. Attempting to set up Trac using wsgi_module. RHEL 5 ships with python 2.4, so in order to use the current version of Trac (1.0) I needed to install it with easy_install-2.6. Trac works with the default mod_python, however users strongly encourage not using this module as it is officially dead. Using RHEL's package manager, I downloaded/installed python26-mod_wsgi.so. I backed up the httpd.conf, then made the following additions: LoadModule wsgi_module modules/python26-mod_wsgi.so #...# WSGIScriptAlias /trac /www/virtualhosts/trac/deploy/cgi-bin/trac.wsgi <Directory /www/virtualhosts/trac/deploy/cgi-bin> WSGIApplicationGroup %{GLOBAL} Order deny,allow Allow from all </Directory> Next I moved trac.conf to trac.conf.bak (contains mod_python calls). I tested the configuration using: apachectl configtest Syntax is OK. So I reloaded the server config using: service httpd reload At this time, all virtualhosted sites stopped responding. I restored my backup copy of httpd.conf, reloaded the server config, and the virtualhosted sites are being served again. A quick look at the httpd error_log shows: [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28282): Initializing Python. [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28280): Attach interpreter ''. [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1817): proxy: grabbed scoreboard slot 0 in child 28283 for worker proxy:reverse [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1836): proxy: worker proxy:reverse already initialized [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1930): proxy: initialized single connection worker 0 in child 28283 for (*) [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28283): Initializing Python. [Mon Oct 08 10:20:04 2012] [notice] child pid 28249 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28250 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28251 exit signal Segmentation fault (11) There are many similar lines, this is just a snip of the log file. Suggestions on what could be going on to cause the Segmentation faults?

  Read the article

• Concerns about Apache per-Vhost logging setup

  - by etienne

  I'm both senior developer and sysadmin in my company, so i'm trying to deal with the needs of both activities. I've set up our apache box, wich deals with 30-50 domains atm (and hopefully will grow larger) and hosts both production and development sites, with this directory structure: domains/ domains/domain.ext/ #FTPS chroot for user domain.ext domains/domain.ext/public #the DocumentRoot of http://domain.ext domains/domain.ext/logs domains/domain.ext/subdomains/sub.domain.ext domains/domain.ext/subdomains/sub.domain.ext/public #DocumentRoot of http://sub.domain.ext Each domain.ext Vhost runs with his dedicated user and group via mpm-itk, umask being 027, and the logs are stored via a piped sudo command, like this: ErrorLog "| /usr/bin/sudo -u nobody -g domain.ext tee -a domains/domain.ext/logs/sub.domain.ext_error.log" CustomLog "| /usr/bin/sudo -u nobody -g domain.ext tee -a domains/domain.ext/logs/sub.domain.ext_access.log" combined Now, i've read a lot about not letting the logs out of a very restricted directory, but the developers often need to give a quick look to a particular subdomain error log, and i don't really want to give them admin rights to look into /var/logs. Having them available into the ftp account is REALLY handy during development stages. Do you think this setup is viable and safe enough? To me it is apparently looking good, but i'm concerned about 3 security issues: -is the sudo pipe enough to deal with symlink exploits? Any catches i'm missing? -log dos: logs are in the same partition of all domains. got hundreds of gigs, but still, if one get disk-space dos'd, everything will break. Any workaround? Will a short timed logrotate suffice? -file descriptors limits: AFAIK the default limit for Apache on Ubuntu Server is currently 8192, which should be plenty enough to handle 2 log files per subdomain. Is it? Am i missing something? I hope to read some thoughts on the matter!

  Read the article

• Robocopy silently missing files

  - by John Hunt

  I'm using Robocopy to sync data from our server's hard disk to an external disk as a backup. It's a pretty simple solution but pretty much the best/easiest one we could come up with - we use two external disks and rotate them offsite. Anyway, here's the script (with the comments taken out) that I'm using to do it. It works very well, it's quick and almost 100% complete - however it's acting pretty strange with a few files (note company name has been changed in paths to protect the innocent): @ECHO OFF set DATESTAMP=%DATE:~10,4%/%DATE:~4,2%/%DATE:~7,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% SET prefix="E:\backup_log-" SET source_dir="M:\Company Names Data\Working Folder\_ADMIN_BACKUP_FILES\COMPA AANY Business Folder_Backup_040407\COMPANY_sales order register\BACKUP CLIENT FOLDERS & CURRENT JOBS pre 270404\CLIENT SALES ORDER REGISTER" SET dest_dir="E:\dest" SET log_fname=%prefix%%date:~-4,4%%date:~-10,2%%date:~-7,2%.log SET what_to_copy=/COPY:DAT /MIR SET options=/R:0 /W:0 /LOG+:%log_fname% /NFL /NDL ROBOCOPY %source_dir% %dest_dir% %what_to_copy% %options% set DATESTAMP=%DATE:~10,4%/%DATE:~4,2%/%DATE:~7,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% cscript msg.vbs "Backup completed at %DATESTAMP% - Logs can be found on the E: drive." :END Normally the source would just be M:\Comapany name data\ but I altered the script a bit to test the problem. The following files in the source are not copied to the dest: Someclient\SONICP~1.DOC Someclient\SONICP~2.DOC Someclient\SONICP~3.DOC However, files in the same directory named: TIMESH~1.XLS TIMESH~2.XLS are copied. I'm able to open the files that aren't copied with no trouble at all, and they certainly weren't opened when I ran robocopy so it's not a locking issue. Robocopy is running as administrator so it's not a permissions issue. There's no trace these files were even attempted to be copied as there are no errors being output in the log or in my command prompt. Does anyone have any suggestions as to what this might be? Busted hard disk? Cheers, John.

  Read the article

• Webservice randomly dropping connections - possibly due to firewall nonevent data?

  - by adam

  I have a hosted webapp which requests data from a REST webservice in our office. Each page calls one (or several) webservices, which go from our host, via our firewall (a Watchguard Firebox) to a server in our office. All of a sudden, the app has dramatically slowed. We have determined that the webservice is timing out at random when called externally (it's fine when called within the office network). I'm pretty certain it's our connection which is dropping the webservice call, so I've written a quick php/curl script which calls the webservice over many iterations and shows the various timings. Below is an example output, showing both a failed and a successful call (with a 5 second timeout): http_code namelookup_time connect_time pretransfer_time starttransfer_time total_time 1 0 0.000096 0.0342 0.0000 0.0000 0.0342 2 200 0.000052 0.0332 0.1327 0.1751 0.1752 As per iteration #1 above, failed requests seem to be failing between connect and pretransfer. I'm not sure if this shows that the connection is successfully past the firewall, or could the firewall still cause an issue? Our firewall is showing a series of nondata event log messages for the relevant access rule. Our IT team tells me these are routine, although I can find no mention of these in Google. I'm not sure if this fits in between connect and pretransfer. Having elinated the webservice server (by testing internally) and the live webapp (by testing different code on different external servers, I am left suspecting the connection to the office. Could the firebox nondata events be causing a problem between connect and pretransfer?

  Read the article

• IIS 7.5 FTP Service crashes after installation of Advanced Logging 1.0 Module

  - by Jeremy

  I've recently been tasked with setting up two new productions servers for an ASP.Net application. The servers sit behind a F5 Load Balancer, which in turn forwards the end users IP address forward via the standard X_Forwarded_For HTTP Header. All of the reading that I have done suggests that I need to install the IIS Advanced Logging Module in order to take advantage of the X_Forwarded_For HTTP Header. Some quick background: Both of the web servers are Windows 2008 R2 Standard (x64), with IIS 7.5 installed and configured. The FTP Role has also been installed, configured and is operational. The Issue After installing the IIS Advanced Logging module via the Web Platform Installer, I noticed the following Error in the Event Viewer: The FTP Service encountered an error trying to read configuration data from file \?\C:\Windows\system32\inetsrv\config\applicationHost.config, line number 374. The error message is: Unrecognized element 'advancedLogging' Trying to connect over FTP to either of the web servers results in a 530. I've spent 2 hours scouring Google trying to find a solution, short of uninstalling the Advanced Logging Module. As far as I can tell, there is no way to turn off Advanced Logging on a site per site basis. Help would be appreciated.

  Read the article

• Site to Site VPN problem, connection succesful data only oneway?

  - by Charles

  To start things off, I'm not the actual Administrator for the VPN Server, but he is also at a loss so I thought I'd ask it here. I know it's a Cisco ASA Firewall/VPN. I have a router that connects to the Cisco VPN server, it does so succesfully. I can ping everything within the remote network and from the remote network into my own. I've been able to SSH into a remote server over VPN as well, it all seems to work; until there's some more data returned. A quick example would be an internal webserver. The default homepage simply redirects, so only sends back HTTP headers with a "Location:". I receive this on my computer, but when I request the actual page then (which isn't that big) I don't get a response at all - it just stalls. And it does this for other services as well, for example SSH. I can do a couple of things while connected, but if there's more than xx output it seems to do nothing. The connection remains active throughout all of this. Has anyone ever experienced anything like this before / know what the problem might be? Another user who has a site-to-site connection with this VPN using the -exact same setup- has no problems, the only difference is that I have around 200ms ping to the VPN server/network because of a very long distance (other continent).

  Read the article

• Command prompt hangs/freezes/crashes sporadically

  - by Leonard Challis

  I'm finding it very difficult to Google this, I don't seem to be able to find anyone with the same issue and I don't know enough about the Windows operating system to troubleshoot. The machine(s) we are seeing the problem on are Windows 7 (professional) both 64bit and 32bit. The problem is with the command prompt freezing up, seemingly randomly. When it does freeze nothing will bring it back to life (i.e. keypress) and it's nothing to do with Quick Insert mode either. It doesn't seem to be when I run standard commands, such as cd, dir, etc, but when I run different programs from the command line. The annoying thing is that sometimes the prompt will freeze and at other times it won't, using the same program/command in the prompt. To add to the frustration, one of my colleagues who had the same problem seems to not have experienced it for a few days now (we're pretty heavy on the command line). It's not a VPN/RDP thing as suggested in other questions and forum posts, as I've seen this both locally and remotely. I thought it was to do with the return code signifying an error or some error state in the program, i.e.: C:\Users\leonardc>mysql -u lalala ERROR 1045 (28000): Access denied for user 'lalala'@'localhost' (using password: NO) but this isn't always the case either. In fact the above command hasn't crashed the shell before. Elevating the prompt to run as Administrator doesn't seem to have any bearing on the problem either. Disabling my anti-virus doesn't have an effect either. Update: I tried the same commands in PowerShell, but I still get the same problem, it will freeze at random times (more often than not, as with the command prompt, but not always). It's not the same as command prompt in the fact that one might work while the other doesn't, but then the next time I try run the same command in both it will suddenly be different again.

  Read the article

• exFAT to NTFS formatting troubles

  - by user1083734

  I recently ran a chkdsk on 2.5" 230GB SATA HDD but the plug was pulled before the end of the chkdsk and since then it wouldn't boot up. Deciding to scrap all data on the HDD (no longer needed it), I then fitted it into an external HDD caddy and (in diskpart) cleaned the disk, created new partition and volume and tried to format it to NTFS. It couldn't do this on long or short formats and so I went with the less-appreciated alternative - exFAT (I run Win7). It quick formats to exFAT fine but encounters errors during long format. At the moment it is exFAT. Of course I would really like it to be NTFS as I will probably need to use it on Win XP too. Could anyone suggest a method of trying to reformat to NTFS? Do you think that, when chkdsk was interrupted first time, the disk was corrupted and is irretrievable? I find this situation slightly odd, as it HAS formatted to exFAT and DOES seem to work when I copy files across! Also, I CAN use disk management console to create several partitions: e.g. a 50GB partition and then a large 180GB partition. The 50GB and WILL long-format to NTFS but the 180GB will not! I'm thinking hardware fault, but then I notice that it WILL format to exfAT! Much confusion!

  Read the article

• Apache is spawning more and more processes!!

  - by erotsppa

  We have a LAMP setup that is working prety good for half a year. All of a sudden today the apache server (mysql servers are not on this box) started to die. It seems to have started to spawn more and more processes over time. Eventually it will consume all the memory and the server would just die. We are using prefork. In the mean time what we are doing is just added more ram and increased the MaxClients and ServerLimit parameter to 512. We're just prolonging the crash. The number still goes up slowly. Maybe in a day, it would reach that limit. What is going on? We only have around 15-20 request per second. We have 1Gb memory and it's not half used, there's no swapping going on. Why is apache creating more and more processes? It's almost like theres a leak somewhere! The database boxes are fine, they are not causing a delay to requests. We tested some queries everything is quick!

  Read the article

• SQL 2K5 - Multiple databases vs. Multiple files

  - by Bob Palmer

  Hey all, quick question. Our current legacy system was built using multiple distinct databases (about ten of them). These are all part of the same discreet system, and a large number of SPs and functionalty span multiple databases. There are also key relationships that span (for example, a header table may be in database A with history, etc. in database B). When deploying multiple copies of our app to the same server therefore, we have to use multiple instances (because the database names are coded into so many sprocs). We're evaluating the idea of taking these ten databases (about 30gb total with individual sizes ranging from 100mb to 10gb) and merging them into a single database. Currently, we have our databases spread accross multiple spindles for better IO. The question I have is whether or not there is any performance loss or benefit of having 10 different databases vs. 10 different database files? i.e. rather than having three databases (A, B, and C) Disk D: A.mdf (1gb) Disk E: B.mdf (4gb) Disk F: C.mdf (10gb) Disk G: A_Log.ldf, B_Log.ldf, C_Log.ldf have one database (X) Disk D: X1.mdf (5gb) Disk E: X2.mdf (5gb) Disk F: X3.mdf (5gb) Disk G: X1_log.ldf,X2_log.ldf,X3_log.ldf Thanks! -Bob

  Read the article

• Slow boot for OS and external devices

  - by Derek Van Cuyk

  I have been having this problem intermittently but as of yesterday, it has become more consistent. It originally started when I rebooted my PC at home and the OS (Windows 8) sat in a loop appearing to do nothing while loading. I figured since this was a new installation, that something may have just become corrupted and I decided to reinstall. So I tried to boot off of the thumb drive which had the installation iso and encountered pretty much the same issue. Same with the DVD drive. So, I rebooted once again and left it to load the entire night just to see if it ever would and sure enough this morning, Windows had finally loaded. Authentication had the same roblem albeit not quite as long (took about 5 minutes to authenticate). However, once I was in, everything appeared to be working fine and as quick as normal with the exception of when I tried to scan the C drive for any errors, which ran unbearably slow (45 minutes and before I left for work and was not finished scanning a 64GB SSD drive). I mention that I have had this issue but never when loading the OS. Before it occurred when trying to install windows 7 from a different DVD drive than the one I have now. It took me about 3 hours to do it since I had to wait sometimes 30+ min for each step to finish processing. Does anyone have an idea as to what can cause this? I am assuming it is the motherboard since it is responsible for communication with all the devices I'm having issues with but I cannot find anyone else who has had a problem like this and don't want to drop more money on a MB if it isn't the problem. Hardware: Motherboard: Asus M4A78T-E Socket AM3/ AMD 790GX/ Hybrid CrossFireX Hard Drive: Kingston SSDNow V+180 64GB Micro SATA II 3GB/S 1.8 Inch Solid State Drive SVP180S2/64G Optical Drive: Samsung Blu-Ray Combo Internal 12XReadable and DVD-Writable Drive with Lightscribe SH-B123L/BSBP Thanks, Derek

  Read the article

• How do I boot [embedded] linux from sd card?

  - by Brandon Yates

  I am hacking together a quick embedded linux system on a DM816x evm board. Previously I have been using TFTP and NFS to load my kernel and root filesystem to the board. I am now trying to switch over to loading everything from an SD card. I have my card partitioned such that uBoot and my kernel image are in one partition, and my rootFS in another partition. At power-on, Uboot starts correctly and successfully launches the kernel. However, the kernel is unable to mount the root file system. It appears that it doesn't recognize any SD (mmc) cards. It gives this error message. VFS: Cannot open root device "mmcblk0p2" or unknown-block(2,0) Please append a correct "root=" boot option; here are the available partitions: 1f00 256 mtdblock0 (driver?) 1f01 8 mtdblock1 (driver?) 1f02 2560 mtdblock2 (driver?) 1f03 1272 mtdblock3 (driver?) 1f04 2432 mtdblock4 (driver?) 1f05 128 mtdblock5 (driver?) 1f06 4352 mtdblock6 (driver?) 1f07 204928 mtdblock7 (driver?) 1f08 50304 mtdblock8 (driver?) Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) I feel like I'm missing something fundamental here. Why does it not recognize the root device I am trying to load from? Here is my uBoot boot script that is running: setenv bootargs console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw mem=124M earlyprink vram=50M ti816xfb.vram=0:16M,1:16M,2:6M ip=off noinitrd;mmc init;fatload mmc 1 0x80009000 uImage;bootm 0x80009000

  Read the article

• The bottlenecks of any computer, what to look for?

  - by WebDevHobo

  Whether it is a laptop or a desktop, any computer is made up of several pieces of hardware that communicate with each other. Sending data back and forth to ensure that the user gets the desired results. I have seen some theoretical stuff on computers & hardware, but I wonder how it all comes together. CPU RAM Graphics Card L1 CACHE L2 CACHE L3 CACHE FSB ... And all other things. Which is the biggest bottle neck? Why would a person not want/need a big value in one of those categories in certain situations? P.S.: when reading the specs of the i5 750 processor, I came across this description: In place of the FSB, one or more high speed, point-to-point buses called Quick Path Interconnect (QPI) are used, formerly known as Common Serial Interconnect Bus or CSI. QPI features higher bandwidth than the traditional FSB and is better suited to system scaling. What is this, and how does it compare to FSB? EDIT: I am not planning to buy a computer at all. The goal of this question is to understand the internal relation of various hardware pieces, their specific functions and how they work together. For instance, I have heard to a somewhat higher-than-usual amount of L2/L3 Cache can help speed up your computer. What's up with saying that? Also I forgot to mention Hard-disk RPM.

  Read the article

• Looking for suitable backup solution Mac OS X to offsite Centos 6 server 1TB of working data

  - by Brady

  I'll start by saying what we have in place currently: On site file server (Mac OS X Server) that is used by GFX designers and they have a working 1TB of data. Offsite server with 2TB available storage (Centos 6) Mac OS X server rsync data to offsite server every 6 hours (rsync -avz --delete --progress -e ssh ...) Mac OS X server does full data backup to LTO 4 tape on a 10 day recycle (Mon-Fri for 2 weeks) rsync pushes about 60GB of file changes a day. The problem: The onsite tape backup is failing as 1TB of graphics files don't compress well to fit onto a 800GB LTO4 tape. Backup is incredibly slow doing a full backup. Pain in the backside getting people to remember to change the tape. Often gets forgotten etc The quick solution: Buy LTO5 Drive and tapes. However this has been turned down because of the cost... What I would like: Something that works in the same way rysnc works. Only changed data is sent over the wire and can be scheduled to run multiple times during the day. Data that is sent is compressed and sent over SSH. Something that keeps a 14day retention but doesn't keep duplicate data So as an example if I have 1TB of working data and 60GB of changes are made each day then I expect around 1.84TB of data to be stored on the offsite server. To work with the Mac OS X server and Centos 6 server. Not cost an arm and a leg. Must be a cheaper solution than buying an LTO5 drive with tapes (around £1500). Be able to be setup to run autonomously. Have some sort of control panel that will allow an admin to easily restore a file/folder. Any recommendations?

  Read the article

• sharing a folder between linux and windows over the internet

  - by valya

  Hello Currently my job is to make websites with Django. I use many things like virtualenv, PIL, etc. The problem is, I can't stand Linux on my desktop. I like it on servers, It's greate to use it over the SSH. But for desktop? No way. But for the development Linux is quite essential. Of course almost everything is ported to Windows, but it's not as simple to use as in Linux. For example, Windows shell is awful in comparison with Linux. So I've tried Cygwin, but it's too damn slow. Every time django dev server reloads, it tooks almost 20-30 seconds. In comparison, then using "native" python on Windows or Linux, it reloads instantly. Even worse, Cygwin makes all my system very slow. I've been thinking about it and have thought up a way to go. I can share a folder with my application with some Linux box. The devserver and everything will run on that box, while I'll be happy editing files and running the browser on my Windows 7. SSH shell is much quickier and handy than Cygwin. Currently there are no Linux boxes in my home network (except for my android phone :) but I have several VDS boxes with Debian. So, how do I share a Windows folder with VDS box? I can't rely on my desktop IP but I can rely on the VDS's one. I need sharing to be as quick as possible (well, 2-3 seconds ping is OK) and "native" for both systems, so I could use a folder like a normal folder in both Windows and Linux.

  Read the article

• CPU-adaptive compression

  - by liori

  Hello, Let assume I need to send some data from one computer to another, over a pretty fast network... for example standard 100Mbit connection (~10MB/s). My disk drives are standard HDD, so their speed is somewhere between 30MB/s and 100MB/s. So I guess that compressing the data on the fly could help. But... I don't want to be limited by CPU. If I choose an algorithm that is intensive on CPU, the transfer will actually go slower than without compression. This is difficult with compressors like GZIP and BZIP2 because you usually set the compression strength once for the whole transfer, and my data streams are sometimes easy, sometimes hard to compress--this makes the process suboptimal because sometimes I do not use full CPU, and sometimes the bandwidth is underutilized. Is there a compression program that would adapt to current CPU/bandwidth and hit the sweet spot so that the transfer will be optimal? Ideally for Linux, but I am still curious about all solutions. I'd love to see something compatible with GZIP/BZIP2 decompressors, but this is not necessary. So I'd like to optimize total transfer time, not simply amount of bytes to send. Also I don't need real time decompression... real time compression is enough. The destination host can process the data later in its spare time. I know this doesn't change much (compression is usually much more CPU-intensive than decompression), but if there's a solution that could use this fact, all the better. Each time I am transferring different data, and I really want to make these one-time transfers as quick as possible. So I won't benefit from getting multiple transfers faster due to stronger compression. Thanks,

  Read the article

• OpenVZ Can't initialize containers after install

  - by Tonino Jankov

  I have installed OpenVZ on centos 6 on a dedicated server. I followed quick installation guide on openvz wiki. After installing thru yum, I don't know why, but grub.conf wasn't automatically updated to accomodate new kernel, so I had to do it manually. I edited grub.conf, added openvz kernel and rebooted - it went fine. Server went up into openvz kernel and it worked, it started openvz service byitself. But after I created a container, added IP to it and attempted to start it, I couldn't. Here is the output from the shell: [root@cloud2 ~]# vzctl start 86 Starting container ... Container is mounted Container start failed (try to check kernel messages, e.g. "dmesg | tail") Container is unmounted [root@cloud2 ~]# dmesg | tail [ 1973.401596] CT: 86: failed to start with err=-105 [ 2107.113850] Failed to initialize the ICMP6 control socket (err -105). [ 2107.155523] CT: 86: stopped [ 2107.155543] CT: 86: failed to start with err=-105 [ 6348.282184] Failed to initialize the ICMP6 control socket (err -105). [ 6348.330348] CT: 86: stopped [ 6348.330361] CT: 86: failed to start with err=-105 [45184.024002] Failed to initialize the ICMP6 control socket (err -105). [45184.072086] CT: 86: stopped [45184.072099] CT: 86: failed to start with err=-105 [root@cloud2 ~]# I don't know what is wrong. I tried different templates, debian 6, centos 6, i386, amd64, but the issue is the same. What is the problem?

  Read the article

• (Zywall USG 300) NAT bypassed when accessing in-house-server From LAN Via domain name

  - by mschr

  My situations is like this; i host a number of websites from within our joint network solution. On the network is basically 3 categories: the known public, registered via mac, given static dhcp lease the anonymous lan connections, given lease from specific dhcp range switches, unix hosts firewall Now, consider following hosts which are of interest 111.111.111.111 (Zywall USG 300 WAN) 192.168.1.1 (ZyWall USG 300 LAN) load balances and bw monitors plus handles NAT 192.168.1.2 (Linux www) serves mydomain1.tld and mydomain2.tld 192.168.123.123 (Random LAN client) accesses mydomain1.tld from LAN 23.234.12.253 (Random External client) accesses mydomain1.tld via WAN DNS A records are setup so that both mydomain1.tld and mydomain2.tld points to 111.111.111.111 - and the Linux www serves the http parts with VirtualHost configurations, setting up the document roots pr ServerName, this is not so interesting though.. NAT rule translates 111.111.111.111:80 to 192.168.1.2:80 (1:1 NAT) Our problem follows; When accessing http://mydomain1.tld from outside (23.234.12.253 example host) the joint network - everything is fine, zywall receives requests via port 80 and maps it to the linux host' httpd. However - once trying to go through the NAT from LAN side (in-house, 192.168.123.123 example host) then one gets filtered in the Zywall port 80 firewall. I know this only because port 443 is open for administration interface and https://mydomain1.tld prompts for zywall login. So my conclusion is, that the LAN that accesses 111.111.111.111 in fact are routed to 192.168.1.1 whilst bypassing the NAT table. I need to know how to setup NAT / Policy Route, so that LAN WAN LAN will function with proper network translations instead of doing the 'quick nameserver lookup' or whatever this might be.

  Read the article

• Can I format a Veritas cluster shared volume from windows?

  - by spaghettidba

  We have a Microsoft Failover Cluster with dynamic disks managed by Veritas Storage Foundation. Today the sysadmins added a new disk for SQL Server but the cluster size on the volume was wrong, so I issued a quick format to change it. The disk volume failed, the SQL Server group failed as well and the cluster became unresponsive. After some minutes I managed to fail over to a passive node. The SAN admins say it's my fault because I shouldn't have formatted the disk from the Windows format applet, but I should have used Veritas Enterprise Administrator instead. Can a format operation bring offline a whole cluster group this way? Relevant error messages: From the eventlog: The cluster resource host subsystem (RHS) stopped unexpectedly. An attempt will be made to restart it. This is usually due to a problem in a resource DLL. Please determine which resource DLL is causing the issue and report the problem to the resource vendor. From the cluster.log ERR [RCM] rcm::RcmResControl::DoResourceControl: ERROR_RESOURCE_CALL_TIMED_OUT(5910)' because of 'Control(STORAGE_GET_DISK_INFO_EX) to resource 'NameOfTheDiskGroup' timed out.' Veritas Documentation: Excerpt from Symantec's documentation: Note: Before manually creating the resource, you must format the cluster-shared volume with NTFS using the VEA GUI and mount it on the node where you are trying to create the resource. Does this mean the disk cannot be formatted from Windows? I don't read it that way. For the record, I formatted many disks using the Windows applet in the past and nothing bad happened.

  Read the article

• Vagrant doesn't detect chef-solo unless re-installed

  - by nightowl

  I am using Vagrant to test my Chef recipes in Amazon AWS, and I am encountering an irritating issue: I initially assumed that Vagrant would install chef itself (as it does when using Virtual Box as the provider) but it seems that this needs to be done using the cloud-init script. However, even after I successfully installed the chef gem via cloud-init I was still getting the following error: The chef binary (eitherchef-soloorchef-client) was not found A quick google of this error suggested three probable causes: Chef had failed to install It had installed, but the directory was not in the $PATH environment variable It had installed and in the $PATH but with incorrect permissions I logged in and double checked; chef-solo and chef-client were installed; The path variable for the user, sudo and root all included /usr/local/bin and permissions were all fine. I managed to solve this problem by uninstalling and reinstalling the gem using sudo gem install chef. I don't understand why this should resolve the issue and it is a bit of a problem if I have to ssh into a test box and manually install the gem every time. Does anyone have any suggestions why this might be happening?

  Read the article

• Can I recover a rm -rf-ed Mercurial repository?

  - by WishCow

  I made the mistake of wiping out my entire project directory with a quick "rm -rf project". Of course, the .hg directory went with it. I had about 15-20 changesets, that I have not pushed to anyone, and I would really really like to get those back. The system is a Ubuntu machine, and the partiton where the delete happened is ext3, the project consist mostly of PHP files. I know about the guideline to not write to the disk in question. The first idea was to use the tool named scalpel, to get the PHP files back and diff them with the current version from the repo, and somehow carve the changes out. While it succeeded, it did not recover the file names (or there is a switch I'm missing), so I'm left with a few thousand sequentially named .php files, combing through them is not an option. Can a kind soul please save me, and suggest a way to: a) get the repo back, or b) get the files back, with filenames For those wondering how I did such a stupid thing: I was working on a file in Vim which I wanted to remove from the repository: :!hg rm % This complained that the file is in a subrepository, so I specified the following: :!hg rm % -R engine which complained that file has modifications, use -f to force. And this is when somehow, I made up the following command: :!rm -rf % -R engine Somehow, seeing "force" makes me do a rm -rf by reflex.

  Read the article

• Lucid Lynx login issue

  - by Bart Silverstrim

  Recently upgraded from Karmic to Lynx. Upgrade seemed to go well, no noticeable issues. I logged in, and my window manager wasn't starting. An application would appear, but sans control buttons and border, so figured the windows manager needed to be given a swift kick. Opened a web browser and a quick google had me run "metacity --replace &" and everything popped up. I re-ran the Compiz configuration tool to enable my rotating desktop cube to the way I liked it, and had to reconfigure my desktop switcher to the right number of desktops (although the first time I ran it, it crashed on the panel and reloaded...odd, but once it relaunched it seemed fine.) Today I installed updates, rebooted and logged in for the second time since my upgrade. Again, the window manager was dead, and my compiz settings were gone, and the workspaces were set back to four (and when I clicked on the preferences to change them, it crashed on the panel and reloaded again). Resetting everything made things look somewhat normal again. I'm guessing it'll work until I reboot again. Googling around isn't turning up similar complaints about Lucid Lynx and the window manager. Before I go deleting preference files, anyone else know of this kind of issue and what could be done about it? Or should I start taking the stab in the dark approach of deleting preference files hoping one of them is corrupt or has something unsupported in it that's throwing LL for a loop?

  Read the article

• Configure IIS Web Site for alternate Port and receive Access Permission error

  - by Andrew J. Brehm

  When I configure IIS to run a Web site on Port 1414, I get the following error: --------------------------- Internet Information Services (IIS) Manager --------------------------- The process cannot access the file because it is being used by another process. (Exception from HRESULT: 0x80070020) However, as according to netstat the port is not in use. Completely aside from IIS, I wrote a test program (just to open the port and test it): TcpListener tcpListener; tcpListener = new TcpListener(IPAddress.Any, port); try { tcpListener.Start(); Console.WriteLine("Press \"q\" key to quit."); ConsoleKeyInfo key; do { key = Console.ReadKey(); } while (key.KeyChar != 'q'); } catch (Exception ex) { Console.WriteLine(ex.Message); } tcpListener.Stop(); The result was an exception and the following ex.Message: An attempt was made to access a socket in a way forbidden by its access permissions The port was available but its "access permissions" are not allowing me access. This remains after several restarts. The port is not reserved or in use as far as I know and while IIS says it is in use, netstat and my test program say it is not and my test program receives the error that I am not allowed to access the port. The test program ran elevated. The IIS Site is running MQSeries, but the MQ listener also cannot start on port 1414 because of this issue. A quick search of my registry found nothing interesting for port 1414. What are socket access permissions and how can I correct mine to allow access?

  Read the article

• RAID6 mdraid -> LVM -> EXT4 root with GRUB2?

  - by Rotonen

  2012-03-31 Debian Wheezy daily build in VirtualBox 4.1.2, 6 disk devices. My steps to reproduce so far: Setup one partition, using the entire disk, as a physical volume for RAID, per disk Setup a single RAID6 mdraid array out of all of those Use the resulting md0 as the only physical volume for the volume group Setup your logical volumes, filesystems and mount points as you wish Install your system Both / and /boot will be in this stack. I've chosen EXT4 as my filesystem for this setup. I can get as far as GRUB2 rescue console, which can see the mdraid, the volume group and the LVM logical volumes (all named appropriately on all levels) on it, but I cannot ls the filesystem contents of any of those and I cannot boot from them. As far as I can see from the documentation the version of GRUB2 shipped there should handle all of this gracefully. http://packages.debian.org/wheezy/grub-pc (1.99-17 at the time of writing.) It is loading the ext2, raid, raid6rec, dosmbr (this one is in the list of modules once per disk) and lvm modules according to the generated grub.cfg file. Also it is defining the list of modules to be loaded twice in the generated grub.cfg file and according to quick Googling around this seems to be the norm and OK for GRUB2. How to get further by getting GRUB2 to actually be able to read the content of the filesystems and boot the system? What am I wrong about in my assumptions of functionality here? EDIT (2012-04-01) My generated grub.cfg: http://pastie.org/3708436 It seems it first makes my /usr logical volume the root and that might be source of the failure? A grub-mkconfig bug? Or is it supposed to get access to stuff from /usr before / and /boot? /boot is on / for me - no separate boot logical volume.

  Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >