Search Results

Search found 9954 results on 399 pages for 'mean'.

Page 187/399 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

• Running a VM off of an external HD via USB

  - by Nelson LaQuet

  Is it viable to run (i.e. reference the vmx/vhd directly from the mounted drive) a VM (vmware running Windows Seven) off of an external HD via USB? I mean, I know it's possible, but I guess I'm asking if USB provides enough bandwidth for normal usage... If so, are there any particular brands that may be better or worse? I know that ESATA would be a more viable setup, but my laptop doesn't have an ESATA port. Currently I use the VM to segregate all of my work development servers and software from my main machine; so I will be running all development servers and tools on the VM directly.

  Read the article

• Is there any way I can use two monitors in the console in Linux?

  - by Alex

  I have recently become the proud owner of two monitors in my workspace. (Ok not owner, but you know what I mean) and I'd like to use both of them at once. Problem is, I much much prefer to use a Linux Server console over a desktop environment. The graphics card on the machine is a GTX295 (don't ask why, it's a long story.) so I essentially have two graphics cards. Each has a DVI output. Is there any way I can get the console to stretch across two screens? Or will I have to install a desktop Ubuntu for this to work?

  Read the article

• tailwatchd - chkservd on host.domain.com status: hang

  - by Zim3r

  The chkservd sub-process with pid 17420 was running for 602 seconds. The sub-process was terminated as it exceeded the time between checks of 300 seconds. Please check /var/log/chkservd.log and /usr/local/cpanel/logs/tailwatchd_log to discover the I was notified for this error by email on the destination server while transferring server. what does it mean ? and also this happened: ftpd failed @ Wed Aug 8 11:26:38 2012. A restart was attempted automagically. Service Check Method: [socket connect] Reason: Timeout while trying to get data from service: Died at /usr/local/cpanel/Cpanel/TailWatch/ChkServd.pm line 607. Number of Restart Attempts: 1 Startup Log: Starting pure-config.pl: Running: /usr/sbin/pure-ftpd -O clf:/var/log/xferlog --daemonize -A -c50 -B -C8 -D -fftp -H -I15 -lextauth:/var/run/ftpd.sock -L10000:8 -m4 -s -U133:022 -u100 -Oxferlog:/usr/local/apache/domlogs/ftpxferlog -k99 -Z -Y1 -JHIGH:MEDIUM:+TLSv1:!SSLv2:+SSLv3 [ OK ] Starting pure-authd:

  Read the article

• DSA private key format

  - by ansur

  So I used puttygen to generate a DSA private key and then exported that to the OpenSSH format and here's what I got when I ran OpenSSL's asn1parse on it: 0:d=0 hl=4 l= 443 cons: SEQUENCE 4:d=1 hl=2 l= 1 prim: INTEGER :00 7:d=1 hl=3 l= 129 prim: INTEGER :B9916796B7A3EFFD5CA36368186D0ED 193BE7FDD61CC6851174F3E9781A0C0CEA7473E528372F559A1DB2A7E049A9BEFAE2CAAC55527049 2A0CD55B59A48A53BCADD32181F519EA9E6A98EF8EF59DE314A2E69606C728F2F8DEE722B4C67BA6 8EB8A619B6006804F83740F9C74C38136522E7E83F22920AA39822FBDA0DF4D0B 139:d=1 hl=2 l= 21 prim: INTEGER :D832F5B01F075FEC0F162B91982F34D B26A0CC29 162:d=1 hl=3 l= 129 prim: INTEGER :9B73F47AEFF8E39584FD10ACF81CCD5 75C96FC5558A5C94B941EF76318D132007ACAE1EA22E95CE0B13FC7875CE4D4ED33BA639CD8C2AC9 C0A0530FB7786F584A62EBAE5985E1C26ED0D0B9FDD5E8DB0142BE182A4E5359307007060C327FEE C2F8D04EABB37D7B74076EB9BDB4885F627DE85708D5BDBF5177A05721E09A367 294:d=1 hl=3 l= 128 prim: INTEGER :6BD9267D2D1E4546EE05F6CD087F311 93C0EEB13B1E139F5072E900AB2EEF68EEC28BF4D7D6CAE4DEE59005F00BAE07343EE520C217FF6E 7880DC788E4555F78CCB5E89A10CDC71A663DA696C5BC34E296CEB3518D65A79BF00B6D592B1399A 9F0D79AE3F3FB445EE1F2B4B72515F036C8E1D5C7FAD336FD3503874645C5C264 425:d=1 hl=2 l= 20 prim: INTEGER :15295A12325E5F1A6F7243B7BB3BE74 6FE7B76E9 My question is... where is this format described? What does the first 0 integer value mean for example? I guess I could look in the puttygen source code but is there an RFC describing this format or something?

  Read the article

• Creating New WebSphere cluster

  - by user154561

  I need to improve WAS perfomance and want to make cluster. I have two separate machines with WebSpphere 7 on it. As I see to do this, I need to add node from my second (remote) WAS to the first one. I try to use "Add node" from console, but without success. It can't find host when I try to execute it. WAS help says about host: Specifies the host name or IP address of the node to add to the cell. A WebSphere Application Server instance must be running on this machine. Does that mean that I cannot add node from a remote machine with "add node?"

  Read the article

• App to slice'n'dice video, specifically remove chunks, on a Mac?

  - by Phillip Oldham

  I have a couple of collections of DVD Box-Sets I've ripped to my mac. Now I'd like to sweeten the viewing experience by removing the title sequences and credits so that viewing doesn't mean I have to keep reaching for the remote to skip 30 seconds of annoying music (think watching multiple episodes of Family Guy). If I can find an app that will let me do this reasonably quickly manually that would be great, but it would be perfect if I could dump a load of commands into a file and have everything trimmed while the mac is "inactive". I'm thinking that if I can specify chunks of time to remove from the original file that would be perfect. I had a quick look at importing into iMovie to do it manually and gave up at the "Processing Thumbnails" stage as it said it would be a couple of hours to produce them for a 45min mp4 file, which I can understand at 25fps but I'm not willing to wait, especially when I've got over a week's worth of files. Any suggestions?

  Read the article

• Multiple .bkf files created in Backupexec 12.5 or 2010 related to heavy I/O?

  - by syuusuke

  Hey everyone, I was wondering if anyone who has used backupexec 12.5 or 2010 have ever experienced multiple .bkf files created for a single job. To describe what I mean by multiple files, the .bkf are being created with random file sizes under 2GB even though I've assigned the setting to chop the file after 10GB size. Some jobs will create 20x .bkf files in 1 job with file chunks ranging from 50MB to 800MB sizes. Is this is a sign of heavy I/O issues? Bandwidth limitations? I'm not sure, I'm here to seek some advices and suggestions. I've setup another backup server with the same exact settings and they seem to create a new .bkf file when 10GB limit has been reached. Although I am backing up different machines but I know my settings are an exact match to the problematic or atleast I think it's a problem.

  Read the article

• Is it possible to route *.example.com to a single machine without registering extra domains?

  - by oligofren

  I would like to achieve something similar to what wordpress.com does - giving each user its own subdomain. user1.wordpress.com would in the VirtualHosts setup of Apache would have its DocRoot at /user/user1, for instance. Now, our hosting service provider takes a fee for creating a domain, and in our case this would mean a ridiculous number of domains with a matching price. After some googling on DNS I came over a description of a DNAME record. That seems to fit the bill precisely. Any reason why my service provider would not do this, or why I should not do this?

  Read the article

• How to read iptables -L output?

  - by skrebbel

  I'm rather new to iptables, and I'm trying to understand its output. I tried to RTFM, but to no avail when it comes to little details like these. When iptables -vnL gives me a line such as: Chain INPUT (policy DROP 2199 packets, 304K bytes) I understand the first part: on incoming data, if the list below this line does not provide any exceptions, then the default policy is to DROP incoming packets. But what does the 2199 packets, 304K bytes part mean? Is that all the packets that were dropped? Is there any way to find out which packets that were, and where they came from? Thanks!

  Read the article

• NetDiag + TCP Blocking?

  - by CrazyNick

  We are facing some issue with the sharepoint 2007 timer jobs everyday at a specific time, so decide to track the tcp blocking informartion during those hours using NetDiag tool. We are not able to find the required information if we uses "netdiag /test:ipsec", what is the command that can be used to pull the TCP blocking information and how to configure it? if i ran the command "netdiag /test:ipsec /debug" it is returning "IP Security test . . . . . . . . . : Skipped", what does it mean?

  Read the article

• Which TCP ports to use?

  - by rowatt

  Is there a TCP port range which I can be sure will not be used by anything else for traffic between two machines? If I am reading RFC6335 correctly, I can be sure that no other applications will use specific ports in the Dynamic/Private/Ephemeral range of 49152-65535. However, if I understand correctly, it also states (section 8.1.2) that an application shouldn't assume that any given port in that range is available at any given time, which would mean I can't be 100% sure that it will be unused all the time. Specifically, I want to assign specific SSH traffic to a different port for the security benefit and so I can classify it differently for QoS purposes, and not have to worry about changing the port in the future.

  Read the article

• safari 5 doesnt work on my computer.

  - by Amairani409

  I just got the new version of safari y downloaded because my mac tell me there was new version that I should be getting. but when I try to run my this new version of the aplication .nothing happends¡ I mean the program seems to be working but nothing apears in the screen and so when I try to see my top sites a little window show up but it just dont show anything. then 3 seconds later the program shut down¡ I dont know why is happening this Im not so a expert in computers but this really is away of all I see on safari and on mac I got Mac OS X version 10.5.8 2.66ghz intel core 2 duo 4gb 1067 MHz DDR3

  Read the article

• Problems with the backup

  - by marcodv

  I did a script which run around 4 o'clock in the morning, for backup all the mysql databases and the config file for 250 linux vm. The problem is that it tooks ages for complete and more than 50% of these vm, need more than 8 hours for complete. More or less all the vm had the same configuration,I mean Same amount of ram same amount of disk space same number of cpu Debian 6.0.5 I am saving these backup on amazon s3, because is the cheapest solutions that I've found. Now my questions is: Has anyone some solutions or suggestions about that? On one blog I've read that probably the ionice and nice combination could be good work around about that. any thought?

  Read the article

• Data CD for audiobooks?

  - by Marco7757

  I'm trying to burn my .mb4-audiobook files to a CD. I was impressed by the compression-rate (10 hours of audiobook within 150MB?!). The problem now is, that I cannot burn it as an audio CD as these allow only about 80 minutes of audio (audiobook is about +10 hours). I burned them as a data CD now. It works, but, of course, the downside of a data CD is, that not every player (e.g. car, stereo) can play data CDs. What can I do? I don't want to waste 100 CDs on such a simple problem ... is there any way to burn an audio CD? I mean, just regarding the filesize this shouldn't be a problem, shouldn't it? Why is an audio CD only able to play up to 80 minutes?

  Read the article

• Amazon and bandwidth limits

  - by Dave

  This question may sound weird to some of you but I have never really used cloud and above all I'm still beginner in the web development and would be really thankful if someone could answer few of my question though they may sound weird So I would like to deploy simple website to Amazon, however, I'm concerned about bandwidth as they charge 0.12GB and I'm not able to set budget limit. My problem is that I wouldn't like to pay for 1000GB of bandwidth if someone for some reason decides to download one file constantly So could some of you, who have experience with amazon, tell what happens if my app is able to handle (say 50 req/sec 30kb/page) does that mean that in the worst case I would have to pay req * sec * min * hours * days * page size 50 * 60 * 60 * 24 * 30 * 30kb = 3888GB

  Read the article

• How to make all of my IPs works in HyperVM XEN?

  - by user758667

  I've installed HyperVM on CentOS 5.8 final to make XEN VPS. I have 5 IPs, and added them to an IPPool. They are from *.123 to *.126. But when I add Virtual machines, just the first one (which indicate to *.123 ip) works well. I mean I can ssh to it by "works well" and when I want ssh to the other ones ( *.124 *.125 ...) it says : ssh: connect to host *.124 port 22: Connection timed out after a while. I alos set gateway and netmask as it shows in my server IPAdresses for device eth0 (it doesn't make any difference if I set these or not, I get same error). What should I do now? Thanks.

  Read the article

• Is there a MySQL performance benchmark to measure the impact of utf8_unicode_ci versus utf8_general_ci?

  - by MiniQuark

  I read here and there that using the utf8_unicode_ci collation ensures a better treatment of unicode text (for example, it knowns how to expand characters such as 'œ' into 'oe' for searching and ordering) compared to the default utf8_general_ci which basically just strips diacritics. Unfortunately, both sources indicate that utf8_unicode_ci is slightly slower than utf8_general_ci. So my question is: what does "slightly slower" mean? Has anyone run benchmarks? Are we talking about a -0.01% performance impact or rather something like -25%? Thanks for your help.

  Read the article

• Why does Outlook 2010 give the message "Creating a new item from the selected items could take some time...are you sure you create a new item...?

  - by Matt

  I'm using Outlook 2010 with Exchange 2007. I am moving emails from my Deleted Items folder to a user-created folder. When I move a "low" number of messages, say a few hundred or less, the operation completes successfully. When I move a "large" number of messages (in this example it's over 800) I get the message shown in the screenshot below. If I click Yes, a new email is generated and has links to all the emails I selected in the Attachment field. When I cancel that email, not only have the messages not moved but they appear to be deleted entirely. What does the message mean and why does it get presented? Why does clicking Yes do the behavior I described above?

  Read the article

• Can the onborad LAN cause computer shutdown

  - by user1146320

  I have P4 processor with nvidia card. Now if i don't connect to internet then my computer stays on for as much i can like 4-5 days. But if i plug in the ethernet wire. Do some surfing and leave computer as it is. Then computer fails. I mean The display on screen gets off Looks like something stopping the power supply to Harddisk. But motherboard stays on , FAN is still running , i can eject CD drive as well. But no display on monitor. I have to turn off and then turn on again. I tried formatting windows XP but again same problem

  Read the article

• VM connected to network but not to internet in VMware Player 6 on Windows 8.1 host

  - by user1257262

  So I am running Bitnami's MEAN stack in VMware Player 6.0.2 on Windows 8.1 and the VM connects just fine to the network: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG However, I am having a great deal of trouble getting the VM to communicate with the internet. No matter what sort of action I take (even something as simple as apt-get update), the machine just sits there and eventually fails to connect. Here is my VM's Network Adapter configuration: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG On my host Windows 8.1 computer, I actually have the VMware Bridge Protocol enabled but for VMware Network Adapters (VMnet1 and VMnet 8), but they are listed as having No Internet access in my Network and Sharing Center. I am not entirely sure if these adapters are relevant to connecting the VM to the internet, to be honest. This is the first time I have ever had an issue connecting a virtual machine to the internet. This problem is also happening with other VM's I am trying to run. Can someone tell me what I am doing wrong and how I can fix it?

  Read the article

• Lan DNS not working after reinstall of Ubuntu 13.10

  - by DrorCohen

  I upgrade my Ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's host name. I get "Unknown Host". However pinging from another computer on the same lan - works fine (a laptop with 12.04 lts). for that matter every ping from the 13.10 to the local lan by hostname fails, ping with ip works. I don't have a local DNS server but somehow all the other computers in the network find each other by host name - only this new one fails... help appreciated...

  Read the article

• How to migrate Notepad++ settings?

  - by NoCatharsis

  I am trying to portabilize every program I use if possible, and Notepad++ is on the list. The only problem is that I've had a native installation until now so that I'm not totally sure which settings files need to be moved to the portable directory. Surely there's a function tucked away somewhere in NPP exactly for this purpose, or some plugin out there? I mean the developers have literally thought of everything else, yet this is the one thing I cannot find specifically anywhere in the NPP wiki or otherwise, and I don't want to miss an important file. Here is the closest I've gotten: Notepad++'s configuration files and Where are all the files? Should I just copy every configuration file listed on the first link?

  Read the article

• Motherboard: Intel S5520HCR s1366 SSI EEB

  - by Crazy_Bash

  I'm building a storage server for online video streaming. I thought about adding two SSD drive for a OS. other 15*(12 SATA & 3 SSD) drives i want to build with aufs XFS and ethernet 4GB/sec network. But I'm confused a little. S5520HCR board supports 6, SATA/300, RAID: 0, 1, 10, Intel ICH10R. Does it mean i can use SATAIII HDD? I'm planing on buying SEAGATE SV35 Series (3.5, 3??, 64??, SATA III-600). also my Chassis supports up-to 16 sata and the motherboard only 6 what kind of sata controller should i use? What's better in terms of performance 1366 or 2011 socket? My server so far: AIC RSC-3EG-80R-SA1S-2 3U Motherboard: Intel S5520HCR s1366 SSI EEB Kingston DDR3 8192Mb PC3-10600 1333MHz (KVR1333D3N9/8G) Seagate 3000GB 64MB 3.5" 7200rpm SATAIII (ST3000DM001) Kingston 480GB SSD 2.5" SATAIII Intel E1G44HTBLK Intel Xeon E5606 2133MHz/L3-8192Kb/QPI s1366 tray SERVER ACC CARD SAS PCIE 16P HBA 9201-16I LSI00244 SGL LSI

  Read the article

• difference between success and failed event in auditd/aureport

  - by user112358132134

  The aureport command has two options that limit the list of displayed events to those that were successful and those that failed. Per the man page: --failed Only select failed events for processing in the reports. The default is both success and failed events. --success Only select successful events for processing in the reports. The default is both success and failed events. What does this mean? Is the failure/success with regard to the actual event (e.g., a syscall that returned non-zero) or does the failure/success apply to auditd and whether or not there was an issue in processing the event?

  Read the article

• Can expire_logs_days be less than 1 day in MySQL?

  - by Scott

  So... yesterday I received an "after the fact email" about a campaign that has started for one of the services that I run. Now the DB server is getting hammered, hard, to the tune of about 300mb/min in binary logging for the replicate. As you could imagine, this is chewing up space at a fairly tremendous rate. My normal 7 day expiry of binary logs just isn't cutting it. I've resorted to truncating logs to just the last for 4 hours with(I'm verifying that replication is up to date with mk-heartbeat): PURGE MASTER LOGS BEFORE DATE_SUB( NOW(), INTERVAL 4 HOUR); I'm just running that from cron every few hours to weather the storm, but it made me question the minimum value for expire_logs_days. I haven't come across a value that is less than 1, but that doesn't mean that it isn't possible. http://dev.mysql.com/doc/refman/5.0/en/server-system-variables.html#sysvar_expire_logs_days gives the type as being numeric, but doesn't indicate if it's expecting integers.

  Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >