Search Results

Search found 6706 results on 269 pages for 'power supply'.

Page 187/269 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

• Metaphor for task synchronization [closed]

  - by nkint

  I'm looking for a metaphor. A friend of mine taught me to use metaphors from nature, everyday life, math, and use them to design my projects. They can help in creating a better design or better understanding or the problem, and they are cool. Now I'm working on a project with hardware and micro-controllers in C. For convenience, I have decided to use multiple micro-controllers as co-processor units for real-time (the slaves) and a master. This has saved me a lot of headache: I can code the main logic in the master without paying too much attention to super optimizing everything; I don't care if I need some blocking-call; I don't worry about serial communication with the computer. I just send messages to the slaves and they are super fast super in real time. I like my design and it seems to work well. So here are the important concepts that I'm trying capture in the metaphor: hierarchy of processing Not using one big brain but rather several small, distributed brain units using distributed power or resources I'm looking for a good metaphor for this concept of having one unit synchronize the work of all the others. Preferably, the metaphor would come from nature, biology, or zoology.

  Read the article

• How is the Ubuntu installation supposed to work?

  - by Bob D

  I have given up on installing Ubuntu 12.04.01 for the sixth time. I finally got Windows XP to work again. So I blitzted the Ubuntu partition and the swap partition and was about to install the sixth try when it occurred to me that ought to ask how is is "supposed" to go. My installer will install Ubuntu on the Linus ext4 partition I created by hand in Windows on my C drive. But the installer keeps insisting on installing the OS on my D drive unless I intervene. So if I choose "do something else" it will accept installing Ubuntu on the C drive in the partition I previously created, but it insists on putting the "Device for boot loader installation" on the D drive. I can select a different drive at this point (where I could not with the "along side windows choice) but what drive to I choose??? It lists sda, sda1, sda5, sdb and sdb1. The five times before this all ended in disaster letting the installer choose. So I need human intervention. Where is the safe place to do this. The results from the previous attempts left me with only the Ubuntu that would boot, the boot to windows from the grub menu failed every time. Is there a better version of Ubuntu I can use? Is V12.04.01 messed up? My goal is still to use Wine on it to run PC programs. I would like to find a shell or skin or something that makes it seem like windows but have the security and power of Linux under the good. I have seen this type of system and it worked very well. I know I am getting long winded but I have been though at least four of the seven rings of hell already, so I want this install to be the last.

  Read the article

• Ubuntu 12.04.1 LTS -touch pad scroll for asus-k55v not working

  - by Aks

  have tried all the commands over terminal but still could bot fix it, for xinput i got Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? MOSART Semi. 2.4G Keyboard Mouse id=11 [slave pointer (2)] ? ? PS/2 Generic Mouse id=15 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? MOSART Semi. 2.4G Keyboard Mouse id=10 [slave keyboard (3)] ? USB 2.0 UVC HD Webcam id=12 [slave keyboard (3)] ? Asus WMI hotkeys id=13 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=14 [slave keyboard (3)] none of the post cud help to fix it :( help

  Read the article

• OpenGL ES 2.0 texture distortion on large geometry

  - by Spruce

  OpenGL ES 2.0 has serious precision issues with texture sampling - I've seen topics with a similar problem, but I haven't seen a real solution to this "distorted OpenGL ES 2.0 texture" problem yet. This is not related to the texture's image format or OpenGL color buffers, it seems like it's a precision error. I don't know what specifically causes the precision to fail - it doesn't seem like it's just the size of geometry that causes this distortion, because simply scaling vertex position passed to the the vertex shader does not solve the issue. Here are some examples of the texture distortion: Distorted Texture (on OpenGL ES 2.0): http://i47.tinypic.com/3322h6d.png What the texture normally looks like (also on OpenGL ES 2.0): http://i49.tinypic.com/b4jc6c.png The texture issue is limited to small scale geometry on OpenGL ES 2.0, otherwise the texture sampling appears normal, but the grainy effect gradually worsens the further the vertex data is from the origin of XYZ(0,0,0) These texture issues do not occur on desktop OpenGL (works fine under Windows XP, Windows 7, and Mac OS X) I've only seen the problem occur on Android, iPhone, or WebGL(which is similar to OpenGL ES 2.0) All textures are power of 2 but the problem still occurs Scaling the vertex data - The values of a vertex's X Y Z location are in the range of: -65536 to +65536 floating point I realized this was large, so I tried dividing the vertex positions by 1024 to shrink the geometry and hopefully get more accurate floating point precision, but this didn't fix or lessen the texture distortion issue Scaling the modelview or scaling the projection matrix does not help Changing texture filtering options does not help Disabling mipmapping, or using GL_NEAREST/GL_LINEAR does nothing Enabling/disabling anisotropic does nothing The banding effect still occurs even when using GL_CLAMP Dividing the texture coords passed to the vertex shader and then multiplying them back to the correct values in the fragment shader, also does not work precision highp sampler2D, highp float, highp int - in the fragment or the vertex shader didn't change anything (lowp/mediump did not work either) I'm thinking this problem has to have been solved at one point - Seeing that OpenGL ES 2.0 -based games have been able to render large-scale, highly detailed geometry

  Read the article

• Building a Store Locator ASP.NET Application Using Google Maps API (Part 2)

  Last week's article, Building a Store Locator ASP.NET Application Using Google Maps API (Part 1), was the first in a multi-part article series exploring how to add store locator-type functionality to your ASP.NET website using the free Google Maps API. Part 1 started with an examination of the database used to power the store locator, which contains a single table named Stores with columns capturing the store number, its address and its latitude and longitude coordinates. Next, we looked at using Google Maps API's geocoding service to translate a user-entered address, such as San Diego, CA or 92101 into its latitude and longitude coordinates. Knowing the coordinates of the address entered by the user, we then looked at writing a SQL query to return those stores within (roughly) 15 miles of the user-entered address. These nearby stores were then displayed in a grid, listing the store number, the distance from the address entered to each store, and the store's address. While a list of nearby stores and their distances certainly qualifies as a store locator, most store locators also include a map showing the area searched, with markers denoting the store locations. This article looks at how to use the Google Maps API, a sprinkle of JavaScript, and a pinch of server-side code to add such functionality to our store locator. Read on to learn more! Read More >

  Read the article

• How to reduce the fan noise and how to increase battery life in ubuntu 11.10/12.04?

  - by mehdi

  I have a brand new Sony Vaio S series laptop.(VPCSA2DGX) It came factory installed with Windows 7 professional Edition 64bit. Runs Intel core i5, 500 GB HDD , 4GB Ram. First I installed ubuntu 11.10 64 bit along side Windows to dual boot. Later,since the problem did not solve, I installed ubuntu 12.04 64bit along side Windows to dual boot. However the problem keeps annoying me. Problem: When running ubuntu 11.10/12.04, the battery lasts only about 1.5 hours. The Fan runs loud and continuously. And there is a lot of heat generated. System monitor shows less than 5% CPU used. My laptop enjoys hybrid graphic and I tried turning off ADM graphic card and keep Intel graphic card on. However I can not get the Fan noise or heat to go away and consequently the battery drain continues. BTW, in windows, the laptop gives 4-5 hours of battery power, Fan is silent and there is no heat problem. Any ideas on how to reduce the fan noise and how to increase battery life in ubuntu 11.10/12.04?

  Read the article

• Hybrid Graphics on Ubuntu 12.04 switching to discrete

  - by cfstras

  I have a Sony Vaio VPCCB-27FX with hybrid graphics. Using vgaswitcheroo enables me to switch my discrete card off to save power. Now when i want to switch to the discrete card for performance, my system freezes. I already tried logging out and killing x with service lightdm stop, but still, it freezes as soon as I echo DIS > switch. typing blindly, echo IGD > switch returns me to my console where it reads [ 179.555171] i915: switched off, but it seems the discrete card never gets switched on... running echo DDIS > switch gives me the following: [540....] [drm:atop_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing CEE2 (len 62, WS 0, PS 0) @ 0xCEFE [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing BBF6 (len 1036, WS 4, PS 0) @ 0xBCF3 [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing BB8C (len 76, WS 0, PS 0) @ 0xBB94 [541....] [drm:r600_RING_TEST] *ERROR* radeon: ring test failed (scratch(0x8504)=0xFFFFFFFF) [541....] [drm:evergreen_resume] *ERROR* evergreen startup failed on resume after that, the atombios part repeats a few times. also, the terminal locks up again and sysrq+REISUB is my only rescue. Has anybody an idea how I can switch to my discrete card without the system locking up? #uname -srvmpio Linux 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux #lsb_release -r Description: Ubuntu 12.04 LTS

  Read the article

• Wordpress .htaccess preventing subfolder access

  - by John K.

  This is sort of a goofy setup, but it's not in my power to reconfigure it at this time. I'm running in a shared hosting environment. The domain is example.com. This is an add-on domain on the host side with example.com being redirected to the www/example.com sub-directory. That directory houses a standard Wordpress site which acts as the main site when you visit example.com. The .htaccess file within that directory is: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteRule ^wp-admin/profile\.php$ /ssm/welcome [R] </IfModule> I have a subdirectory, at the root level with the /example.com subdirectory that houses a cake php application. That subdirectory is /tracker. My problem is that when I attempt to browse to example.com/tracker, I get a 404 from Wordpress because perma links are on. What I think I need is a rewrite rule in the Wordpress .htaccess file that short circuits the existing rewrite rules and permits example.com/tracker to work independently of the Wordpress install. Or a rewrite rule at the root level that short circuits the redirect to the /example.com directory in the first place. Not sure how well I explained that so here's a summary. The www/ directory structure: example.com/ tracker/ Add on domain of www.example.com redirecting to the /example.com directory with Wordpress and a tracker/ directory running CakePHP which I would like to access via www.example.com/tracker. If you need further info or clarification let me know!

  Read the article

• WizMouse Enables Mouse Over Scrolling on Any Window

  - by ETC

  WizMouse is a free and lightweight Windows application that enables a simple but effective trick: the ability to scroll the contents of a window that is under your mouse cursor without shifting the focus to that window. It may not seem like much, at first glance, but the ability to scroll a window without having to click on it and shift the focus of your current window is a huge time saver. Once WizMouse is installed simply mousing over any open window and engage your scroll wheel for instant scroll with no additional click or shift in focus necessary. You’ll get so used to it you’ll forget that it wasn’t built into Windows from the start. Hit up the link below to grab a copy of WizMouse, a free and Windows only application. WizMouse [Antibody Software] Latest Features How-To Geek ETC Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) WizMouse Enables Mouse Over Scrolling on Any Window Enhance GIMP’s Image Editing Power with Gimp Paint Studio Reclaim Vertical UI Space by Moving Your Tabs to the Side in Firefox Wind and Water: Puzzle Battles – An Awesome Game for Linux and Windows How Star Wars Changed the World [Infographic] Tabs Visual Manager Adds Thumbnailed Tab Switching to Chrome

  Read the article

• Oracle Database Appliance and Remarketers - A Whole New Opportunity

  - by Martin Morganti

  We have recently had another exciting announcement for the remarketer initiative. The Oracle Database Appliance is now available for resale through your authorized Value Added Distributor. This means that with no fees, no barriers and no upfront commitments, a remarketer can identify and close transactions for the Oracle Database Appliance without having to sign an Oracle contract. In addition, the remarketer is now authorized to sell the Oracle Database Appliance with Oracle Database 11G Enterprise Edition, RAC or RAC One Node software included in the transaction. The availability of the Oracle Database Appliance for remarketers means that a broad base of customers through remarketers can now start engaging with Oracle by taking advantage of this engineered system technology; basically Oracle Hardware and Software Engineered to Work Together to drive incremental revenue. The Oracle Database Appliance is a simple, reliable and affordable way to rapidly deploy a database cluster by plugging in the power; the network and pushing the one button install for the Appliance Manager software. Find out more about the Oracle Database Appliance, including a webinar by Oracle President Mark Hurd, as well as other material to help you better understand the opportunity available to you as remarketers. If you want Oracle to keep you informed about developments in Remarketer complete the free registration, or talk to your local Oracle Remarketer Authorized value added distributors. (Complete list available on the Oracle Remarketer page).

  Read the article

• Should I expect my team to have more than a basic proficiency with our source control system?

  - by Joshua Smith

  My company switched from Subversion to Git about three months ago. We had weeks of advance notice prior to the switch. Since I'd never used Git before (or any other DVCS), I read Pro Git and spent a little time spinning up my own repositories and playing around, so that when we switched I'd be able to keep working with minimal pain. Now I'm the 'Git guy' by default. With a couple of exceptions, most of my team still has no idea how Git works. For example, they still think of branches as complete copies of the source code, and even go so far as to clone the repo into multiple folders (one per branch). They generally look at Git as a scary black box. Given the fundamental nature of source control in our daily work (not to mention the ridiculous amount of power Git affords us), I'm of the opinion that any dev who doesn't achieve a certain level of proficiency with it is a liability. Should I expect my team to have at least some understanding of how Git works internally, and how to use it beyond the most basic pull/merge/push operations? Or am I just making something out of nothing?

  Read the article

• Priority Manager&ndash;Part 1- Laying out the plan

  - by Patrick Liekhus

  Now that we have shown the EDMX with XPO/XAF and how use SpecFlow and BDD to run EasyTest scripts, let’s put it all together and show the evolution of a project using all the tools combined. I have a simple project that I use to track my priorities throughout the day.  It uses some of Stephen Covey’s principles from The 7 Habits of Highly Effective People.  The idea is to write down all your priorities the night before and rank them.  This way when you get started tomorrow you will have your list of priorities.  Now it’s not that new things won’t appear tomorrow and reprioritize your list, but at least now you can track them.  My idea is to create a project that will allow you manage your list from your desktop, a web browser or your mobile device.  This way your list is never too far away.  I will layout the data model and the additional concepts as time progresses. My goal is to show the power of all of these tools combined and I thought the best way would be to build a project in sequence.  I have had this idea for quite some time so let’s get it completed with the outline below. Here is the outline of the series of post in the near future: Part 2 – Modeling the Business Objects Part 3 – Changing XAF Default Properties Part 4 – Advanced Settings within Liekhus EDMX/XAF Tool Part 5 – Custom Business Rules Part 6 – Unit Testing Our Implementation Part 7 – Behavior Driven Development (BDD) and SpecFlow Tests Part 8 – Using the Windows Application Part 9 – Using the Web Application Part 10 – Exposing OData from our Project Part 11 – Consuming OData with Excel PowerPivot Part 12 – Consuming OData with iOS Part 13 – Consuming OData with Android Part 14 – What’s Next I hope this helps outline what to expect.  I anticipate that I will have additional topics mixed in there but I plan on getting this outline completed within the next several weeks.  Thanks

  Read the article

• Simple NAS setup for Ubuntu

  - by Sean Houlihane

  So, I want to connect my shiny new NAS (QNAP TS-210p II) to my Ubuntu 11.10 box. I have a 2nd Ubuntu machine, but I don't use that enough to be too worried about it. Use is ideally to offload all storage except for system (which can then run off a 30GB flash drive). The main machine also runs Myth front/backends. Both are on a wired network currently. I have got a basic setup working, mounted over NFS, but have some issues, and whenever I look for answers, I seem to get unto the UbuntuServer domain, with what seems like more detail than I want in an answer. Questions I have identified so far: 1) Sharing UIDs to get file permissions correct. LDAP or something else? What is necessary to make this work? 2) Mounting an NFS device reliably. Do I just add it in fstab or is some sort of auto-mount advisable? Its a wired network, but I shouldn't need to worry about reboot after power-outages and sequencing...

  Read the article

• How do I fix a garbled screen on a Gateway LT3103u?

  - by paracaudex

  I've been having garbled screen problems on a Gateway LT3103u on Ubuntu for a while. I just did a fresh install of Ubuntu 11.10 and continue to have issues. I installed xubuntu-desktop in case the issues had to do with the sophisticated GNOME graphics. The problem is less bad, but it's still there. After a few minutes of using XFCE, the screen gets garbled. I assume this has something to do with the graphics card, but I don't know how to go about troubleshooting something like this. Where should I start? Update: Here is the description of the VGA card from lspci -vvv: 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device 028c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- [disabled] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: radeon Kernel modules: radeon Update: Setting GRUB_CMDLINE_LINUX="nomodeset" in /etc/default/grub seems to have fixed it in both Ubuntu and xubuntu-desktop. I will test it for a day or so to see if the problems recur and then post more detail with some links to an explanation. Update 2: It is possible to use this fix for Nvidia card (GTX 260) when graphics is defective after 11.10 upgrade/install? First few restarts was graphic ok, then after few restarts begins suddenly be defective and it stay so. I must returned to 11.04 because this problem and I wait for 12.04. So I hope in this fix.

  Read the article

• More on Oracle OpenWorld 2012

  - by Maria Colgan

  With only two weeks to go until Oracle OpenWorld, it is time to start planning your schedule. Every year folks ask me what Optimizer related sessions they should go and see at OpenWorld. Below are my top two picks for each day of the conference, to get your schedule started. Sunday, September 30th at 9am Beginning performance tuning Session UGF 3320 in Moscone West, room 2022 Sunday September 30th at 12:30pm Ten Surprising Performance Tactics Session UGF10426 in Moscone West, room 2016 Monday October 1st at 12:15pm The Evolution of Histograms in Oracle Database Session CON2803 in Moscone south, room 302 Monday October 1st at 1:45pm A Day in the Life of a Real-World Performance Engineer Session CON8404 in Moscone south, room 303 Tuesday October 2nd at 11:45am Oracle Partitioning: It’s Getting Even Better Session CON8321 in Moscone South, room 101 Tuesday October 2nd at 1:15pm Oracle Optimizer: Harnessing the Power of Optimizer Hints  Session CON8455 in Moscone South, room 103 Wednesday October 3rd at 3:30pm SQL Plan Stability: Post 11g Upgrade—Verizon Wireless’ Experience Session CON4485 in Moscone South, room 302 Wednesday October 3rd at 5pm Five SQL and PL/SQL Things in the Latest Generation of Database Technology Session CON8432 Moscone South, room 103 Thursday, October 4th at 11:15pm How the Query Optimizer Learns from Its Mistakes  Session CON3330 in Moscone west, room 3016 Thursday, October 4th at 12:45pm Oracle Optimizer: An Insider’s View of How the Optimizer Works Session CON8457 in Moscone South, room 104 Don't forget to pickup an Optimizer bumper sticker at the Optimizer demo booth. This year we are located in booth 3157, in the Database area of the demogrounds, in Moscone South. Members of the Optimizer development team will be there Monday through Wednesday from 9:45 am until 6pm.

  Read the article

• Is there a precedent for the license on a compiler restricting the kind of development you can use it for?

  - by Jim McKeeth

  It was recently let slip that the new EULA for Delphi XE3 will prohibit Client Server development with the Professional edition without the additional purchase of a Client Server license pack. This is not to say the Professional version will lack the features, but the license will specifically prohibit the developer from using the compiler for a specific class of development, even with 3rd party or home grown solutions. So my question is if there is a precedent of a compiler or similar creative tool prohibiting the class of work you can use it for. Specifically a commercially licensed "professional" tool like Delphi XE3. Also, would such a restriction be legally enforceable? I know there have been educational edition or starter edition tools in the past that have restricted their use for commercial purposes, but those were not sold as "professional" tools. Also I know that a lot of computing software and equipment will have a disclaimer that it is not for use in "life support equipment" or "nuclear power" but that is more of avoiding liability than prohibiting activity. Seems like I recall Microsoft putting a restriction in FrontPage that you couldn't use it to create a web site that reflected poorly on Microsoft, but they pulled that restriction before it could be tested legally.

  Read the article

• Cannot establish Wired connection on Acer Aspire 5930G

  - by drakos46

  I use an Acer Aspire 5930G, dual booted with Windows 7 and Ubuntu 13.10. My problem is that i cannot establish wired connection on my ubuntu. Wireless connection works in both of my OSs but the Wired connection does not, only on the Ubuntu. I have already tried the common fix: echo on | sudo tee /sys/class/net/eth0/device/power/control but without any results. Any ideas? eth0 Link encap:Ethernet HWaddr 00:1d:72:c2:21:a5 inet6 addr: fe80::21d:72ff:fec2:21a5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:945 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:204318 (204.3 KB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:7241 errors:0 dropped:0 overruns:0 frame:0 TX packets:7241 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:645874 (645.8 KB) TX bytes:645874 (645.8 KB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:57:7b:cc inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::216:eaff:fe57:7bcc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:19937 errors:0 dropped:0 overruns:0 frame:0 TX packets:16933 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10877245 (10.8 MB) TX bytes:3131378 (3.1 MB) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8071 PCI-E Gigabit Ethernet Controller (rev 16)

  Read the article

• Does Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502] work with ubuntu 12.04 LTS?

  - by nightfly

  I have this DVB+Analog usb tv tuner Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502]. This used to work under ubuntu 10.04 LTS. But in 12.04 there seems to be a problem. I have linux-firmware-nonfree and ivtv-utils installed. I am running Ubuntu 12.04.1 LTS 64 bit with all updates installed and the default unity environment. When I run mplayer tv:// -tv driver=v4l2:device=/dev/video1:input=1:norm=PAL I get a solid green screen and no picture. Here input 1 is the composite input of the card. MPlayer svn r34540 (Ubuntu), built with gcc-4.6 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing tv://. TV file format detected. Selected driver: v4l2 name: Video 4 Linux 2 input author: Martin Olschewski comment: first try, more to come ;-) Selected device: Hauppauge WinTV HVR 900 (R2) Tuner cap: Tuner rxs: Capabilities: video capture VBI capture device tuner audio read/write streaming supported norms: 0 = NTSC; 1 = NTSC-M; 2 = NTSC-M-JP; 3 = NTSC-M-KR; 4 = NTSC-443; 5 = PAL; 6 = PAL-BG; 7 = PAL-H; 8 = PAL-I; 9 = PAL-DK; 10 = PAL-M; 11 = PAL-N; 12 = PAL-Nc; 13 = PAL-60; 14 = SECAM; 15 = SECAM-B; 16 = SECAM-G; 17 = SECAM-H; 18 = SECAM-DK; 19 = SECAM-L; 20 = SECAM-Lc; inputs: 0 = Television; 1 = Composite1; 2 = S-Video; Current input: 1 Current format: YUYV v4l2: current audio mode is : MONO v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory [vdpau] Error when calling vdp_device_create_x11: 1 ========================================================================== Opening video decoder: [raw] RAW Uncompressed Video Movie-Aspect is undefined - no prescaling applied. VO: [xv] 640x480 = 640x480 Packed YUY2 Selected video codec: [rawyuy2] vfm: raw (RAW YUY2) ========================================================================== Audio: no sound Starting playback... v4l2: select timeout V: 0.0 2/ 2 ??% ??% ??,?% 0 0 v4l2: select timeout V: 0.0 4/ 4 ??% ??% ??,?% 0 0 v4l2: select timeout V: 0.0 6/ 6 ??% ??% ??,?% 0 0 v4l2: select timeout v4l2: 0 frames successfully processed, 1 frames dropped. Exiting... (Quit) Here is the dmesg of the card when plugged in.. [12742.228097] usb 1-4: new high-speed USB device number 3 using ehci_hcd [12742.367289] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [12742.367296] em28xx: Audio Vendor Class interface 0 found [12742.367585] em28xx #0: chip ID is em2882/em2883 [12742.550086] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [12742.550104] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [12742.550120] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [12742.550135] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [12742.550150] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12742.550165] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12742.550181] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [12742.550196] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 32 00 33 00 39 00 30 00 31 00 [12742.550211] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [12742.550226] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [12742.550241] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [12742.550257] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [12742.550272] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [12742.550287] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [12742.550302] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [12742.550317] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [12742.550334] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2bbf3bdd [12742.550338] em28xx #0: EEPROM info: [12742.550340] em28xx #0: AC97 audio (5 sample rates) [12742.550343] em28xx #0: 500mA max power [12742.550346] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [12742.552590] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [12742.555516] tveeprom 15-0050: Hauppauge model 65018, rev B2C0, serial# 1292061 [12742.555523] tveeprom 15-0050: tuner model is Xceive XC3028 (idx 120, type 71) [12742.555529] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [12742.555534] tveeprom 15-0050: audio processor is None (idx 0) [12742.555537] tveeprom 15-0050: has radio [12742.570297] tuner 15-0061: Tuner -1 found with type(s) Radio TV. [12742.570327] xc2028 15-0061: creating new instance [12742.570332] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [12742.573685] xc2028 15-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [12742.624056] xc2028 15-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [12744.126591] xc2028 15-0061: Loading firmware for type=MTS (4), id 000000000000b700. [12744.153586] xc2028 15-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [12744.280963] Registered IR keymap rc-hauppauge [12744.281151] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1/input10 [12744.281541] rc1: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1 [12744.282454] em28xx #0: Config register raw data: 0xd0 [12744.284709] em28xx #0: AC97 vendor ID = 0xffffffff [12744.285829] em28xx #0: AC97 features = 0x6a90 [12744.285832] em28xx #0: Empia 202 AC97 audio processor detected [12744.359211] em28xx #0: v4l2 driver version 0.1.3 [12744.404066] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [12745.915089] MTS (4), id 00000000000000ff: [12745.915100] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [12746.161668] em28xx #0: V4L2 video device registered as video1 [12746.161673] em28xx #0: V4L2 VBI device registered as vbi0 [12746.162845] em28xx-audio.c: probing for em28xx Audio Vendor Class [12746.162848] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [12746.162851] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [12746.221099] xc2028 15-0061: attaching existing instance [12746.221105] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [12746.221109] em28xx #0: em28xx #0/2: xc3028 attached [12746.221113] DVB: registering new adapter (em28xx #0) [12746.221118] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [12746.221869] em28xx #0: Successfully loaded em28xx-dvb [13111.196055] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13112.720062] MTS (4), id 00000000000000ff: [13112.720072] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13214.956057] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13216.479806] MTS (4), id 00000000000000ff: [13216.479816] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13276.408056] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13277.932093] MTS (4), id 00000000000000ff: [13277.932104] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13305.032076] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13306.556449] MTS (4), id 00000000000000ff: [13306.556460] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13392.236055] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13393.760123] MTS (4), id 00000000000000ff: [13393.760133] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13637.534053] usb 1-4: USB disconnect, device number 3 [13637.534183] em28xx #0: disconnecting em28xx #0 video [13637.560214] em28xx #0: V4L2 device vbi0 deregistered [13637.560335] em28xx #0: V4L2 device video1 deregistered [13637.561237] xc2028 15-0061: destroying instance [13639.772120] usb 1-4: new high-speed USB device number 4 using ehci_hcd [13639.911351] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [13639.911357] em28xx: Audio Vendor Class interface 0 found [13639.911637] em28xx #0: chip ID is em2882/em2883 [13640.094262] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [13640.094280] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [13640.094295] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [13640.094311] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [13640.094326] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [13640.094341] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [13640.094356] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [13640.094371] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 32 00 33 00 39 00 30 00 31 00 [13640.094386] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [13640.094401] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [13640.094416] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [13640.094432] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [13640.094447] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [13640.094462] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [13640.094477] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [13640.094492] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [13640.094509] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2bbf3bdd [13640.094512] em28xx #0: EEPROM info: [13640.094515] em28xx #0: AC97 audio (5 sample rates) [13640.094517] em28xx #0: 500mA max power [13640.094521] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [13640.097391] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [13640.099617] tveeprom 15-0050: Hauppauge model 65018, rev B2C0, serial# 1292061 [13640.099623] tveeprom 15-0050: tuner model is Xceive XC3028 (idx 120, type 71) [13640.099629] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [13640.099634] tveeprom 15-0050: audio processor is None (idx 0) [13640.099637] tveeprom 15-0050: has radio [13640.112849] tuner 15-0061: Tuner -1 found with type(s) Radio TV. [13640.112877] xc2028 15-0061: creating new instance [13640.112882] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [13640.115930] xc2028 15-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [13640.164057] xc2028 15-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [13641.666643] xc2028 15-0061: Loading firmware for type=MTS (4), id 000000000000b700. [13641.693262] xc2028 15-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [13641.820765] Registered IR keymap rc-hauppauge [13641.820958] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc2/input11 [13641.821335] rc2: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc2 [13641.822256] em28xx #0: Config register raw data: 0xd0 [13641.824526] em28xx #0: AC97 vendor ID = 0xffffffff [13641.825503] em28xx #0: AC97 features = 0x6a90 [13641.825507] em28xx #0: Empia 202 AC97 audio processor detected [13641.899015] em28xx #0: v4l2 driver version 0.1.3 [13641.944064] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13643.470765] MTS (4), id 00000000000000ff: [13643.470776] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13643.717713] em28xx #0: V4L2 video device registered as video1 [13643.717718] em28xx #0: V4L2 VBI device registered as vbi0 [13643.718770] em28xx-audio.c: probing for em28xx Audio Vendor Class [13643.718775] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [13643.718778] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [13643.777148] xc2028 15-0061: attaching existing instance [13643.777154] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [13643.777158] em28xx #0: em28xx #0/2: xc3028 attached [13643.777162] DVB: registering new adapter (em28xx #0) [13643.777167] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [13643.777876] em28xx #0: Successfully loaded em28xx-dvb And here goes the lsmod output lsmod|grep em28xx em28xx_dvb 18579 0 dvb_core 110619 1 em28xx_dvb em28xx_alsa 18305 0 em28xx 109365 2 em28xx_dvb,em28xx_alsa v4l2_common 16454 3 tuner,tvp5150,em28xx videobuf_vmalloc 13589 1 em28xx videobuf_core 26390 2 em28xx,videobuf_vmalloc rc_core 26412 10 rc_hauppauge,ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,em28xx,ir_nec_decoder snd_pcm 97188 3 em28xx_alsa,snd_hda_intel,snd_hda_codec tveeprom 21249 1 em28xx videodev 98259 5 tuner,tvp5150,em28xx,v4l2_common,uvcvideo snd 78855 14 em28xx_alsa,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device Isn't this driver mainline now? Or this card is not supported? Or the analog functionality is screwed? I need the analog capture working for this card. Please help!

  Read the article

• Can't install Ubuntu, black screen after install

  - by Tyrone

  I tried several times, but wasn't able to make it work. I tried all recent types of Ubuntu but it didn't work. Then I tried acpi=off at the beginning of the installation. In this way I could finish the installation. But after the restart Ubuntu didn't work. Only a black screen appeared. Before that I tried it on the VirtualBox and it work. By the way my system is the following: (I use windows 7 currently) Processor AMD Athlon II P320 (2,1 GHz, second-level cache 2 ? 512 KB, HT 1600 MHz bus) Chipset AMD M880G + SB850 Memory Dual Channel, 3 GB DDR3-1066 Wide Screen 15.6 “high-definition (1366 ? 768) c LED-backlit, AU Optronics B156XW02 Video Card AMD Radeon HD 4250, from 336 MB video buffer in memory, support for DirectX 10.1 and UVD Sound system: HDA-codec IDT 92HD81B1X AMD HDMI Audio Hard drive WDC WD3200BEVT-75A23T0 (298 GB, 5400 RPM, SATA 2.0) Optical Drive: DVD ± RW Optiarc AD-7585H Communication tools Fast Ethernet (10/100 Mbit / c) Realtek RTL8102E/RTL8103E WiFi 802.11a/b/g Broadcom BCM4310 Bluetooth 2.1 + EDR Card reader Memory Card Reader 7-in-1 with support for SD / SDHC / MMC / MS / xD, and derivatives Interfaces / ports 3 USB 2.0 1 eSATA + USB 2.0 15-pin video connector VGA HDMI RJ-45 Ethernet 10/100 Mbit / c 2 analog mini-jack: a microphone / headphone jack for a Kensington lock slot AC adapter Battery Li-Ion 6-cell capacity of 4400 mA ? h (10,8, 48 W ? hr) AC power adapter 65 Watt Additional equipment integrated web-camera (1.3 mega pixels)

  Read the article

• Ubuntu server 11.04 recognize only 1 core instead of 4

  - by Kreker

  I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

  Read the article

• Transmission shutdown script for multiple torrents?

  - by Khurshid Alam

  I have written a shutdown script for transmission. Transmission calls the script after a torrent download finishes. The script runs perfectly on my machine (Ubuntu 11.04 & 12.04). #!/bin/bash sleep 300s # default display on current host DISPLAY=:0.0 # find out if monitor is on. Default timeout can be configured from screensaver/Power configuration. STATUS=`xset -display $DISPLAY -q | grep 'Monitor'` echo $STATUS if [ "$STATUS" == " Monitor is On" ] ### Then check if its still downloading a torrent. Couldn't figure out how.(May be) by monitoring network downstream activity? then notify-send "Downloads Complete" "Exiting transmisssion now" pkill transmission else notify-send "Downloads Complete" "Shutting Down Computer" dbus-send --session --type=method_call --print-reply --dest=org.gnome.SessionManager /org/gnome/SessionManager org.gnome.SessionManager.RequestShutdown fi exit 0 The problem is that when I'm downloading more than one file, when the first one finishes, transmission executes the script. I would like to do that but after all downloads are completed. I want to put a 2nd check ( right after monitor check) if it is still downloading another torrent. Is there any way to do this?

  Read the article

• 2012 Oracle Fusion Middleware Innovation Awards Announced

  - by Tanu Sood

  Guest Contributor: Margaret Harrist. Originally posted on Oracle NewsCentral Companies from around the world were honored Tuesday for their innovative solutions using Oracle Fusion Middleware. This year’s 27 award winners, representing 11 countries and a wide span of industries, wowed the judges with a range of projects across eight product categories. A panel of judges scored each entry across multiple categories, including the uniqueness of their business case, business benefits, level of impact relative to the size of the organization, complexity and magnitude of implementation, and the architecture’s originality. In a general session just before the award presentation, Oracle Executive Vice President Hasan Rizvi highlighted a few of the winners’ original implementations, including Nike, Los Angeles Department of Water and Power, and Nintendo of America. Congratulations to the 2012 winners: Oracle Exalogic: Netshoes, Claro, UL, and Ingersoll Rand Oracle Cloud Application Foundation: Mazda Motor Corporation, HOTELBEDS Technology, Globalia, Nike, and Comcast Corporation Oracle SOA and Oracle BPM: NTT Docomo, Schneider National, Amadeus, and Motability Oracle WebCenter: News Limited, University of Louisville, China Mobile Jiangsu, Life Technologies Oracle Identity Management: Education Testing Service and Avea Oracle Data Integration: Raymond James and William Morrison Supermarkets Oracle Application Development Framework and Oracle Fusion Development: Qualcomm, Micros Systems, and Marfin Egnatia Bank Business Analytics (Oracle BI, Oracle EPM, Oracle Exalytics): INC Research, Experian, and Hologic

  Read the article

• HP Notebook Pavilion g6-2101sl freeze

  - by StErMi

  I just bought this notebook and I've already installed in a new partition Ubuntu 12.04 LTS with 6gb of swap memory. UPDATE2: This is the laptop configuration: http://h10025.www1.hp.com/ewfrf/wc/document?cc=it&lc=it&dlc=it&tmp_geoLoc=true&docname=c03397517 Sometimes (without any special conditions) Ubuntu freezes. My mouse is blocked, the UI is blocked, ALT+F1 to kill something or to restart is blocked, I can't really do anything... I've also tried and it freezes with: Ubuntu 3D Ubuntu 2D Gnome Shell and it freezes both with low and high load. I can only press on power button (physically) and restart my laptop (and this is not the correct way to do things). I'm using this laptop for work, so I need a stable OS without this freeze. Someone knows how to solve this problem? UPDATE: /var/log/messages is empty /var/log/kernel.log - http://paste.ubuntu.com/1220182/ /var/log/Xorg.0.log - http://paste.ubuntu.com/1220186/ I just installed propetary driver from ATI, it crash anyway. This morning I started laptop, I enabled wireless, opened dropbox and chrome - freeze. When it freeze I cannot: Do ctrl+alt+f1 to get console access AltF2 + r to reload session Alt+Print + RESUB to restart I totally freezed.

  Read the article

• Operating System not Found after installing Ubuntu in a Sony Vaio

  - by diego8arock

  I just bought a Sony Vaio SVS15115FLB that came with Windows 7, after enjoying the PC graphic power for a little, I decided it was time to install Ubuntu 12.04. First, I inserted a USB stick, reboot, press F11 but a message saying that no OS was found on the USB, so then I used a live CD. It booted fine and I installed Ubuntu, then when it was time to restart the PC, it didn't boot to GRUB but it went straight to Windows and it began an startup error and was looking for a solution, after it was done, it restarted and then it booted again to Windows and to the same start up error solution thing. I freaked out, so I booted again the Ubuntu live CD, and installed Ubuntu over everything, after it installed I rebooted and then a message appeared saying Operating system Not Found, and I have no idea why. So I Googled again and found this post on Boot Partition, I did everything exactly on that post, but it didn't work (by the way, this was the message): The boot files of [Ubuntu 12.04 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. It appeared the first time, then I did it all again and then it was gone. I rebooted and nothing, the same Operating System not found message appeared. So I decided to create a partition for Windows, hoping for something, but the message still appears. I really have no idea what to do, but there is something odd, if I insert the USB stick containing Ubuntu 11.10, the message that says that there is no OS in the PendDrive flashes for a fraction of a second and the boot straight to Ubuntu 12.04 without problems (and booted to Windows when I installed it, ignoring Ubuntu), right now I'm using it like that, but its pretty annoying. Can anyone advise me how to fix this? I'm no expert on this kind of things (boot, GRUB, recovery and stuff like that).

  Read the article

• Canon MG6100 series USB printer receives job but doesn't physically print

  - by Old-linux-fan

  Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

  Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >