Search Results

Search found 7124 results on 285 pages for 'printer driver'.

Page 188/285 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

• Sound issue in Lubuntu

  - by jvsa90

  I'm recently having a problem in my Lubuntu deskptop: sound through the speakers doesn't seem to work. The funny thing is: it works when I plug in my earphones. I've tried to unmute everything with pavucontrol and alsamixer, but everything seems to be OK. $ sudo aplay -l **** Liste der Hardware-Geräte (PLAYBACK) **** Karte 0: Intel [HDA Intel], Gerät 0: HDA Generic [HDA Generic] Sub-Geräte: 0/1 Sub-Gerät #0: subdevice #0 $ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: Acer Incorporated [ALI] Device 034a Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 58200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel Can anyone guess what's happening? It has worked until recently and it definitely works in my Windows partition.

  Read the article

• Cannot upgrade or install 12.04 - Black screen

  - by Paul

  An update from 11.10 to 12.04 failed because of a boot into black screen (Nvidia graphics card) after selecting normal boot in Grub (recovery console was available though). I then wiped the whole partition (deleting all proprietary drivers) and tried a fresh install, but could not run the installation cd because it was booting straight into a black screen again. Now I reinstalled 11.10 (and installed proprietary Nvidia driver version 173), and would like to ask 2 questions: 1 - Is there a proven method to fix this problem from the recovery console, so that I can safely try upgrading again (without much knowledge of Ubuntu)? 2 - Is there a website which I could check for updated Nvidia drivers packaged into the upgrade, so that I can safely upgrade without running into a black screen some time later on?

  Read the article

• Broadcom bcm4313 Ubuntu 13.10 connection time out

  - by Wahtever

  After upgrading to Ubuntu 13.10 I keep getting connection timed out every few seconds at which point i have to disconnect and reconnect to the WiFi network. The WiFi card worked fine on 13.04 with the bcmwl-kernel-source installed but giving problems on 13.10: *-network description: Wireless interface product: BCM4313 802.11bgn Wireless Network Adapter vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: c0:14:3d:cc:c9:c7 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=192.168.1.4 latency=0 multicast=yes wireless=IEEE 802.11abg resources: irq:17 memory:f0500000-f0503fff How can i fix this? Thanks

  Read the article

• Slow Wireless Reconnect After Suspend

  - by nrhine1

  I a Broadcom 4312 using the STA drivers, I reinstalled ubuntu because the b43 drivers were giving me a huge hassle along with some weird kernel issues. My wireless speed is fine, everything works well, except upon restart of computer and after taking the computer out of suspend. It takes about 30-45 seconds for the wireless to reconnect, and I think it is a driver issue (I clicked on the network manager at the top and for about 30 seconds there are no wireless networks listed.) I tried this advice already: http://lilserenity.wordpress.com/2007/10/31/fix-ubuntu-dropping-wireless-on-suspendhibernate-resume/ which basically says to change this: STOP_SERVICES="" to STOP_SERVICES="networking" in the file /etc/default/acpi-support This did not help anything. Something to note is that the issue does not occur when I am logging back in after already logging in once and logging out.

  Read the article

• Can't install AMD drivers and Blinking problem

  - by demonscream

  I just installed Ubuntu 12.04 LTS with WUBI, everything is going fine and ubuntu is awesome but i have a little problem. When i open my Sony VAIO model E laptop, i have 2 choices (which is normal) but when i select Ubuntu 1/2 of the time it will just give a rapidly blinkin color background and can only be corrected if i reboot the computer and select ubuntu again. I think this has something to do with the fact i can't get any driver update for my computer from AMD, according to their website, VAIO computers aren't supported. I have a AMD RADEON HD 7650M graphic card which is not detected in ubuntu. When i try to install the drivers using the drivers application it gives a "can't install" error. What should i do?

  Read the article

• Is it possible to update my graphic card drivers?

  - by madmaxpt

  This is what the lspci -v command shows in the VGA compatible controller section: 00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller (prog-if 00 [VGA controller]) Subsystem: Dell Device 048e Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f0200000 (32-bit, non-prefetchable) [size=512K] I/O ports at 18d0 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f0000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 i915 is only compatible with OpenGL 1.4 and cannot use shaders and I'd like to use some Open GL 2.0 functionalities. Is it possible to update the drivers or is my hardware limited to OpenGL 1.4 ?

  Read the article

• gnome shell with very high CPU usage

  - by 501 - not implemented

  i'm running ubuntu gnome 13.10 on my dell latiude e6510 with a i5 m560. The I5 comes with a embedded Intel HD 3400 Graphics. The average cpu usage of the gnome-shell is by 160% it's to high, I think. Is there a problem with a driver? If i call the command glxinfo | grep OpenGL it returns: OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.3, 128 bits) OpenGL version string: 2.1 Mesa 9.2.1 OpenGL shading language version string: 1.30 OpenGL extensions: Greetings

  Read the article

• Audio output and input stopped working after the last update

  - by renatov

  I'm using Ubuntu 14.04 and everything was perfect until todays's update. Now my audio output (speakers) and input (microphone) stopped working. I guess it's a driver issue, but I need help to debug this problem and to solve it. I have a Dell Inspiron 5421 notebook with an Intel audio integrated sound card: $ lspci | grep Audio 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) If I go to Ubuntu Settings Sound Output, it doesn't show my Intel card there anymore: The same for the Input tab, it doesn's show my Intel card there anymore: Could you please help me?

  Read the article

• Install/Downgrade kernel to v3.5.5 on Ubuntu 13.04

  - by Villi Magg

  I've been looking around the internet for a solution to downgrade the kernel from 3.8 to 3.5.5 since I've got the AMD/Ati Radeon Mobility HD 5600 graphic card on my machine. This video card in unfortunately not supported by the 3.8 kernel. And then when I've downgraded the kernel I need to install a version 12.* of the AMD Catalyst driver. There is too much in stake to wipe out the current installation of the OS and install an older OS. So I would like to avoid doing that to the ends of the world. Hope someone can help me with this one? Kind regards! Villi Magg.

  Read the article

• Deactivated wifi drivers, now they won't activate again on a Dell Mini 10v?

  - by UbuntuFan

  I have ubuntu 13.04. In the software and update menu, under additional drivers, Were it says "Broadcom Corporation; BCM4312 802.11b/gLP.PHY" the box labbeled "do not use it ticked" and when i try tick the one that says "Using Broadcom 802.11 Linux STA Wireless drivers....." it wont let me apply changes, it starts doing it then stops and re-ticks the do not use box. Because of this I can not use the wiress driver. Is there another way i can fix this. Or maby restore ubuntu to previous date. I accidentally ticked the do not use box this morning and now can't undo it. I have restarted several times to try apply changes and still no luck

  Read the article

• Black frame around screen after HDMI connection failure

  - by Wolter Hellmund

  I was trying to watch a movie in my computer through the TV, so I connected both with an HDMI cable. I was unable to have a successful setup (the colors were all weird on the TV and the screen size, incorrect), I tried many resolutions using the nvidia-settings application and somehow my screen got framed by a black border and after that I have been unable to remove it, even after restarting the computer and not being connected to the HDMI cable anymore. I am using Ubuntu 11.10 amd64, my GPU is an nVidia GeForce 8600M GT and I am using the propietary driver version 280. The problem is due to some setting with my account only. I logged in to the guest session and the resolution is right there. Also, my desktop "thinks" the resolution is right (i.e. 1280x800), but it must be right in another scale because there is pixel area occupied by the black frame.

  Read the article

• Deactivate one graphicdevice in a SLI system

  - by NobbZ

  As it is now, I have a Gaminglaptop with 2 GeForce 9800M GT with SLI activated, Ubuntu 12.04. When I use any graphicdriver that is aware of acceleration features the system crashes after a short period of time. After I removed and purged jockey my system runs stable but slowly, but I can use it for now (I have to choose recovery at startup and the resume boot, botting up normal results in a colorflickering screen). But since the system is runs slowly, I would like to try to work with only one graphicdevice. First test device A, if that doesn't work test with device B. A testing tool for Windows already told me, that one of the cards doesn't work properly, but it doesn't say which one (same crashes in Windows when programs or desktop uses acceleration). Therefore I wanted to ask, if there is a way to reinstall any nVidia (or third party) driver, deactivate one of the two devices and test the stability?

  Read the article

• From where can I install my nVidia drivers? [closed]

  - by Arthur Wulf White

  Possible Duplicate: How do I install extra drivers? Additional Drivers tool in Ubuntu 12.10? I have read here and here that I should be able to install drivers. So I'm finding the Additional Drivers menu. To install nVidia driver. I started looking for System -> Administration and not finding it. I have an icon that says System Settings and it has any option related to drivers. NOTE: I am using Ubuntu 12.10.

  Read the article

• How do I install latest NVIDIA drivers?

  - by Shahe Tajiryan

  This is what I am trying to do. I downloaded the latest driver for my VGA from http://www.nvidia.com. The installation needs the X11 to be shut down, so I log out of my account, then press CTRL+ALT+F1, then log in with my username and passowrd, then run the command sh NVIDIA-Linux-x86_64-285.05.09.run in every possible way, I have even tried CHMODing the package with 777 permissions, but still I'm getting the sh: can't open NVIDIA-Linux-x86_64-285.05.09.run error. Any help would be greatly appreciated.

  Read the article

• I can't get a native resolution of 1920x1080 on 11.10 (AOC f22 on a Nvidia Geforce GTS 450)

  - by Mikeeeee

  I have a problem were the highest resolution I can get is 1360x769, this is a 22 inch LCD monitor with a native resolution of 1920x1080_60 I have tried numerous drivers but nothing changed I tried editing the xorg.conf scipt with no success (I am a noob with linux though). Running many commands in terminal witch I got from people with similar problems only gives me errors like "Failed to get size of gamma for output default. I get edid checksum is invalid error on boot down also. I think there maybe a communication problem between my screens EDID and ubuntu although xp and windows 7 detect my screen without any errors and automatically set native resolution. also when I am installing ubuntu I get a horrible screen flashing every few seconds until I have installed the nvidia driver. pc specks if it helps x64 os, mainboard N68PV-GS, 4 gig ram, AMD Phenom(tm) 9350e Quad-Core Processor × 4, Nvidia Geforce gts450 512mb, hard drives set up in a onboard nvidia raid array striped. realy need to get a better resolution, 1360x769 does not look nice on a 22 inch screen. ty

  Read the article

• Issues running alongside windows and connecting to wireless network

  - by user292247

  Okay so I'm trying to get started with ubuntu but I'm encountering a couple problems: When I boot up the CD and try to install, it does not recognize that I have windows 7 installed and just sees it as unallocated space so the only way I've been able to install it is by wiping the drive which was fine, but it'd be nice to be able to boot either. And secondly, I cannot figure out how to get wireless working. When I try to connect on the initial installation process it tells me to connect to my adapter and just asks for a password. I suspect it could be a driver issue but I wouldn't know where to find it. I have an AR9485 atheros adapter and am attempting to run ubuntu 14.04. Thanks

  Read the article

• nvidia-package in 12.10 somehow not same like in 12.04 resp. X-lib not complete?

  - by dschinn1001

  Not knowing if this has to do with new kernel-update automatic done by ubuntu 12.10 ? it seems that kernel 3.2 in 12.04 has not these problems with nvidia-drivers ? I tried to install the actual google-earth as deb-package with dpkg -i it seems to be no problem, but when I type command: google-earth in terminal, there comes up the report among else: Xlib: extension "NV-GLX" missing on display ":0". Xlib is installed completely and nvidia-driver is de-installed (then reboot) then re-installed again. the report of google-earth stays the same: Xlib: extension "NV-GLX" missing on display ":0". ubuntu 12.04 was working quite good with google-earth. however: bumblebee seems to be taken out of program ? ( or needs to be re-edited ? ) Don't hurry too quick with solution, I can wait !

  Read the article

• Can I run alsa and pulse side by side ? I think there is some problem with the alsa ! My ubunu login sound and alert sound are not working?

  - by Curious Apprentice

  I think I have Alsa driver installed. Pulse not working may be I dont have it installed. Not sure If I can run Pulse and Alsa. I had to configure each application prior to work which use pulse.(SMplayer by default select pulse. I had to change that) I know a little about these. So if the question is stupid then please help me. Smplayer always showing a cross(x) icon in front of speaker icon as it is disabled, though Im playing sound.

  Read the article

• Graphics corrupt after upgrade from 11.10 to 12.04

  - by RiaanZA

  I'm stuck at the moment with an ubuntu that boots into an unusable white screen after upgrading from 11.10 to 12.04. I've tried booting into safe X mode but it just throws me back to the safe menu every time. Restore previous graphics driver, use default graphics configuration and set up new graphics configuration all don't work either. I've tried various methods of resetting the graphics from the command line, but none are working due to unmet dependencies. These cannot be fixed by doing the normal "apt-get -f install" because its saying there is a dpkg error in var/lib/dpkg/status (blank line relating to skype-wrapper). I haven't been able to find any other way to fix the dependencies yet. Can someone please give me some advice on what to do, I really don't want to go the re install route.

  Read the article

• How do I install the latest NVIDIA drivers from the .run file?

  - by Shahe Tajiryan

  This is what I am trying to do. I downloaded the latest driver for my VGA from http://www.nvidia.com. The installation needs the X11 to be shut down, so I log out of my account, then press Ctrl+Alt+F1, then log in with my username and password, then run the command sh NVIDIA-Linux-x86_64-285.05.09.run in every possible way, I have even tried CHMODing the package with 777 permissions, but still I'm getting the sh: can't open NVIDIA-Linux-x86_64-285.05.09.run error. Any help would be greatly appreciated.

  Read the article

• Deactivated wifi drivers, now they wont activate again?

  - by UbuntuFan

  I have ubuntu 13.04. In the software and update menu, under additional drivers, Were it says "Broadcom Corporation; BCM4312 802.11b/gLP.PHY" the box labbeled "do not use it ticked" and when i try tick the one that says "Using Broadcom 802.11 Linux STA Wireless drivers....." it wont let me apply changes, it starts doing it then stops and re-ticks the do not use box. Because of this I can not use the wiress driver. Is there another way i can fix this. Or maby restore ubuntu to previous date. I accidentally ticked the do not use box this morning and now can't undo it. I have restarted several times to try apply changes and still no luck

  Read the article

• Radeon HD4850 card, ubuntu 12.04.1 LTS Installed FGLRX drivers, but still running vesa, how to solve it?

  - by user113416

  I have ati HD4850 card, ubuntu 12.04.1LTS. To begin with, after fresh instll, i installed fglrx drvers from system -- additional drivers, according to fglrxifo everything was alright, but the system was running on vesa:sem. After that, i have reinstalled and installed drivers according to many tutorials, but stille got that problem. one of the tutorial was here: What is the correct way to install ATI Catalyst Video Drivers (fglrx)? of course, i attempted to install 12.6 driver Now i have a fresh install of ubuntu and don't want to touch anything without anyone's support, because my 3 days nightmare didn't give results. what must i do to have an adequate performance of video card? Thanks in advace.

  Read the article

• Dell Inspiron 1210 mini Blank Screen on boot 12.04

  - by jrod

  Dell Inspiron 1210 mini Blank Screen on boot 12.04 If I mash buttons I get to a gray screen then the login screen and into the desktop but normally I turn on the laptop and I see a black screen with a cursor then a purple screen then it just goes black. I can hit ctrl alt F1 or F2 and get a prompt. I've tried using the poulsbo ppa driver script fix but that doesn't work. I don't knwo what to do now. I have the OS installed and when I did get into the OS by mashing buttons I installed updates and wireless adapter drivers. It works but if I reboot I jsut get to the black screen and have no idea what to do. What needs to be done so that I can just boot up and see the login screen!?

  Read the article

• configuring separate X screens instead of TwinView

  - by fimre

  My Sony Vaio laptop is connected to an external Samsung monitor and my nVidia driver is configured in TwinView mode. Everything is OK with this, however, I can not adjust my displays individually so at the moment my external display is a little bit darker which disturbs me a lot. I tried the Separate X Screen mode but after restart, my laptop display was white with a black x sign mouse pointer and the external display normal desktop. Is it a bug or something I missed? The idea is that using Separate X Screen mode, I could adjust my displays individually. I would really appreciate someone would guide me out of this situation. Thanx in adv..

  Read the article

• Ubuntu 12.04 Responsiveness Extremely Slow on Nvidia 8800?

  - by lynxie

  Just installed 12.04... This is the first time I run Ubuntu with the Unity UI, not a pleasant experience. The responsiveness is extremely slow (10s after a mouseclick), the screen flickers, etc, all right after logging in. Switching the display driver from Nvidia current to post-release doesn't help at all. What now? Can't go back, but Ubuntu is useless to me right now. What can I do? (The system is a Intel 4x2.4Ghz with 4Gb RAM and a Nvidia 8800.)

  Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >