Search Results

Search found 6955 results on 279 pages for 'sara mara 32'.

Page 188/279 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

• Fan not detected by lm-sensors

  - by OrangeTux

  My fan is blowing hard, while my cpu temperature is 32 degrees I tried a lot of things to control my fan. Changed grub file GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi= pci=noacpi" _ GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=\"Linux\"" Ran sensors-detect : To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK Ran sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +34.0°C (crit = +90.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +34.0°C (high = +80.0°C, crit = +90.0°C) Core 2: +34.0°C (high = +80.0°C, crit = +90.0°C) Ran sudo start module-init-tools and sudo start module-init-tools module-init-tools stop/waiting As you can see my fan isn't detected. Running fancontrol gives me this: Loading configuration from /etc/fancontrol ... Error: Can't read configuration file Can you help me, please? I cannot use my laptop now in class. Thanks in advance. My system 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)

  Read the article

• SAPPHIRE HD 7770 no audio on HDMI TV display

  - by zeroconf

  I have SAPPHIRE HD 7770 and cannot get work audio over HDMI. http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1159&lid=1&pid=1452&leg=0 I use Ubuntu 12.04 LTS 64-bit version with all current updates. I tried at /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" ... it didn't help. It's probably I use proprietary driver -this seems to be open source driver. I use the driver, what jockey-gtk (additional drivers) offered me: ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER <---- I installed that one ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER (post-release update) So - I installed the first one, because installing second version failed. Everything went fine but no sound at TV display by HDMI. Even Gnome sound mixer doesn't show HDMI choice. Using 32" Samsung B530 LCD TV - http://www.lcdbesttv.com/2010/02/samsung-b530-series-lcd-tv/ I have Asus P8Z77-M motherboard - http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z77M/ - there is also HDMI integrated. When I put HDMI cord to that plug, then even Gnome sound mixer showed HDMI audio but it didn't work. I have set from BIOS, that I use that SAPPHIRE HD 7770 from PCIe. My lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 Display controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 683d 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device aab0 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 09) 04:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)

  Read the article

• 2013 EC Elections Results

  - by Heather VanCura

  The 2013 Fall Executive Committee (EC) Elections process is now complete.  Congratulations to the following JCP Members as the new and re-elected EC Members!   We had a slight increase in JCP Member voter turnout at ~25% (up from 24% in 2012).  All Ratified candidates and the top eight Elected candidates were elected by the JCP Membership.  As part of the transition to a merged EC, Members elected in 2013 are ranked to determine whether their initial term will be one or two years. The 50% of Ratified and 50% of Elected members who receive the most votes will serve an initial two-year term, while all others will serve an initial one year term (details below). Ratified Seats: Credit Suisse, Ericsson, Freescale, Fujitsu, Gemalto M2M, Goldman Sachs, Hewlett-Packard, IBM, Intel, Nokia, Red Hat, SAP, SouJava, Software AG, TOTVS and V2COM. Open Election Seats: Eclipse Foundation, Twitter, London Java Community, CloudBees, ARM, Azul Systems, Werner Keil and MoroccoJUG. Newly elected EC Members take their seats on Tuesday, 12 November 2013.  More information is available on the JCP Elections page. Detailed Election Results Voting Period: 15 - 28 October 2013. Number of Eligible Voters: 1088 Percent of Eligible Members Casting Votes: 24.77% Ratified Seats: Candidate Yes Votes (%) No Votes (%) Abstentions Credit Suisse (2year term) 196 (84) 38 (16) 36 Ericsson (2 year term) 196 (88) 27 (12) 47 Freescale (1 year term) 151 (74) 53 (26) 66 Fujitsu (2 year term) 194 (87) 29 (13) 47 Gemalto M2M (1 year term) 170 (80) 42 (20) 58 Goldman Sachs (1 year term) 143 (64) 80 (36) 47 Hewlett-Packard (2 year term) 191 (82) 43 (18) 36 IBM (2 year term) 226 (91) 22 (9) 22 Intel (2 year term) 214 (90) 24 (10) 32 Nokia (1 year term) 139 (64) 78 (36) 53 Red Hat (2 year term) 245 (95) 12 (5) 13 SAP (1 year term) 166 (75) 56 (25) 48 SouJava (2 year term) 226 (92) 19 (8) 25 Software AG (1 year term) 167 (78) 47 (22) 56 TOTVS (1 year term) 129 (69) 59 (31) 82 V2COM (1 year term) 135 (71) 54 (29) 81 Open Election Seats: The top eight candidates have been elected; the top four receive a two year term, and the next four receive a one year term. Candidate Votes (%) Eclipse Foundation (2 year term) 221 (14) Twitter (2 year term) 203 (13) London Java Community (2 year term) 191 (12) CloudBees (2 year term) 179 (11) ARM (1 year term) 176 (11) Azul Systems (1 year term) 166 (10) Werner Keil (1 year term) 128 (8) MoroccoJUG (1 year term) 93 (6) Karan Malhi 56 (3) ChinaNanjingJUG 51 (3) JUG Joglosemar 47 (3) Viresh Wali 45 (3) ITP_JAVA 44 (3) None of the Above 3 (0)

  Read the article

• HDMI sound gone, can't figure out how to turn it back on

  - by Oli

  I have had an Acer Revo box as a media centre for a while. I recently installed Ubuntu Server (10.10) on it and polished it up with nodm (one of the most simple ways to launch an X session) and installed boxee. It's been working fine for over a month. It's just running ALSA. I've had problems with PulseAudio/Boxee/HDMI before so I wanted to keep it simple. And that worked. It pushed both PCM and digital (AAC and various Dolby codecs) over HDMI perfectly. But I restarted it the other day after mucking around with some nfs configuration and now there isn't any sound. The hardware is an ION chipset. Nvidia 9400M graphics with Nvidia MCP79/7A audio. One thing I have noticed is there doesn't appear to be any sign of a IEC958 device. A traditional fix in the past for fresh installs has been to load alsamixer, find the IEC device and toggle its mute but I can't. I'm certain this used to represent the HDMI output. It just doesn't seem to exist any more unless I run sudo alsa-utils restart while boxee is running, when I see it in an error message: * Shutting down ALSA... [ OK ] * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1388: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... ...done. When nodm (and thus boxee) aren't running, I don't see this error but alsamixer still doesn't show the IEC channel. aplay -l gives: card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 Its section in lshw reads: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:22 memory:fae78000-fae7bfff I was running on the stock PAE kernel but now it's running on 2.6.37.1. I upgraded to see if that fixed things; it didn't. I'm considering a reinstall but I hate doing that because a) there's a bit of custom configuration in getting X and Boxee to start on boot and b) I don't know what the problem is. If I reinstall this time, I'll end up doing that every time the sound breaks. I love Ubuntu but I don't want to install it once a month. Is there any way to forcibly reset all alsa settings and restart from scratch (without doing a reinstall)? Any other tips? If you need more information, just ask.

  Read the article

• Checking if an Unloaded Collection Contains Elements

  - by Ricardo Peres

  If you want to know if an unloaded collection in an entity contains elements, or count them, without actually loading them, you need to use a custom query; that is because the Count property (if the collection is not mapped with lazy=”extra”) and the LINQ Count() and Any() methods force the whole collection to be loaded. You can use something like these two methods, one for checking if there are any values, the other for actually counting them: 1: public static Boolean Exists(this ISession session, IEnumerable collection) 2: { 3: if (collection is IPersistentCollection) 4: { 5: IPersistentCollection col = collection as IPersistentCollection; 6:  7: if (col.WasInitialized == false) 8: { 9: String[] roleParts = col.Role.Split('.'); 10: String ownerTypeName = String.Join(".", roleParts, 0, roleParts.Length - 1); 11: String ownerCollectionName = roleParts.Last(); 12: String hql = "select 1 from " + ownerTypeName + " it where it.id = :id and exists elements(it." + ownerCollectionName + ")"; 13: Boolean exists = session.CreateQuery(hql).SetParameter("id", col.Key).List().Count == 1; 14:  15: return (exists); 16: } 17: } 18:  19: return ((collection as IEnumerable).OfType<Object>().Any()); 20: } 21:  22: public static Int64 Count(this ISession session, IEnumerable collection) 23: { 24: if (collection is IPersistentCollection) 25: { 26: IPersistentCollection col = collection as IPersistentCollection; 27:  28: if (col.WasInitialized == false) 29: { 30: String[] roleParts = col.Role.Split('.'); 31: String ownerTypeName = String.Join(".", roleParts, 0, roleParts.Length - 1); 32: String ownerCollectionName = roleParts.Last(); 33: String hql = "select count(elements(it." + ownerCollectionName + ")) from " + ownerTypeName + " it where it.id = :id"; 34: Int64 count = session.CreateQuery(hql).SetParameter("id", col.Key).UniqueResult<Int64>(); 35:  36: return (count); 37: } 38: } 39:  40: return ((collection as IEnumerable).OfType<Object>().Count()); 41: } Here’s how: 1: MyEntity entity = session.Load(100); 2:  3: if (session.Exists(entity.SomeCollection)) 4: { 5: Int32 count = session.Count(entity.SomeCollection); 6: //... 7: }

  Read the article

• Marshalling C# Structs into DX11 cbuffers

  - by Craig

  I'm having some issues with the packing of my structure in C# and passing them through to cbuffers I have registered in HLSL. When I pack my struct in one manner the information seems to be able to pass to the shader: [StructLayout(LayoutKind.Explicit, Size = 16)] internal struct TestStruct { [FieldOffset(0)] public Vector3 mEyePosition; [FieldOffset(12)] public int type; } This works perfectly when used against this HLSL fragment: cbuffer PerFrame : register(b0) { Vector3 eyePos; int type; } float3 GetColour() { float3 returnColour = float(0.0f, 0.0f, 0.0f); switch(type) { case 0: returnColour = float3(1.0f, 0.0f, 0.0f); break; case 1: returnColour = float3(0.0f, 1.0f, 0.0f); break; case 2: returnColour = float3(0.0f, 0.0f, 1.0f); break; } return returnColour; } However, when I use the following structure definitions... // Note this is 16 because HLSL packs in 4 float 'chunks'. // It is also simplified, but still demonstrates the problem. [StructLayout(Layout.Explicit, Size = 16)] internal struct InternalTestStruct { [FieldOffset(0)] public int type; } [StructLayout(LayoutKind.Explicit, Size = 32)] internal struct TestStruct { [FieldOffset(0)] public Vector3 mEyePosition; //Missing 4 bytes here for correct packing. [FieldOffset(16)] public InternalTestStruct mInternal; } ... the following HLSL fragment no longer works. struct InternalType { int type; } cbuffer PerFrame : register(b0) { Vector3 eyePos; InternalType internalStruct; } float3 GetColour() { float3 returnColour = float(0.0f, 0.0f, 0.0f); switch(internaltype.type) { case 0: returnColour = float3(1.0f, 0.0f, 0.0f); break; case 1: returnColour = float3(0.0f, 1.0f, 0.0f); break; case 2: returnColour = float3(0.0f, 0.0f, 1.0f); break; } return returnColour; } Is there a problem with the way I am packing the struct, or is it another issue? To re-iterate: I can pass a struct in a cbuffer so long as it does not contain a nested struct.

  Read the article

• Make the Taskbar Buttons Switch to the Last Active Window in Windows 7

  - by The Geek

  The new Windows 7 taskbar’s Aero Peek feature, with the live thumbnails of every window, is awesome… but sometimes you just want to be able to click the taskbar button and have the last open window show up instead. Here’s a quick hack to make it work better. To better understand the problem, imagine having nine windows of the same type open on your screen, but you are primarily working in just one of the windows at a time. So every time you want to switch back, you have to click the taskbar button, and then choose the one you are using from the list, which can be pretty annoying… Now if you know your Windows 7 shortcuts, you’d know that you can simply hold down the Ctrl key while clicking on the taskbar button, and the last window will show up. In fact, you can keep holding down the Ctrl key and keep clicking, and Windows will cycle through the open windows. It’s a useful shortcut, but hardly something you want to do every single time. Instead, we’ll use a quick registry hack to make the normal click switch to the last open window—if you still want to see the thumbnail list, just hover your mouse over the button for half a second to see the full list. Manual Registry Hack for Last Active Window Open up regedit.exe through the start menu search or run box, and then head down to the following registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced Once you’re there, create a new 32-bit DWORD value on the right hand side, give it the name LastActiveClick, and set the value to 1. Once you are done, it should look something like this: Once you are done, you’ll have to log off and back on, or you can kill Explorer.exe through Task Manager and re-open it. Download the Registry Hack Instead Since you probably don’t feel like registry hacking, we’ve provided you an easy downloadable version. You can simply download the file, extract it, and then double-click on the LastActiveClick.reg file. Once you are done, you’ll have to log off and back on, just like with the manual registry hack. Download LastActiveClick Registry Hack from howtogeek.com Similar Articles Productive Geek Tips Make the Windows 7 Taskbar Work More Like Windows XP or VistaStupid Geek Tricks: Select Multiple Windows on the TaskbarReorganize Your Taskbar Buttons and Tray Icons in XP/VistaKeyboard Ninja: Create a Hotkey to Switch to Your Open Outlook WindowTaskbar Eliminator Does What the Name Implies: Hides Your Windows Taskbar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

  Read the article

• JavaOne Latin America 2011: Keynotes, Sessions, Hands-on Lab, Geek Bike Ride, etc.

  - by arungupta

  After a very successful JavaOne San Francisco, the first JavaOne on the road for 2011 is heading to Latin America next week. There are 59 sessions delivered by several rock star speakers and with 60% sessions delivered by the local community. There are strategy, technical and community keynotes. The community keynote on Thursday will particularly be lot of fun with appearances from Java Champions, JUG leaders, jHome, and several others. Also check out the Exhibitor Floor Plan and don't forget to Register! The complete session schedule gives an overview for the list of technical sessions and hands-on lab. There are several Java EE, GlassFish, and WebLogic sessions and are highlighted below: Tuesday, Dec 6 Oracle WebLogic Server XML-Free Programming: Java Server and Client Development without <> Java EE Application in Production: Tips and Tricks to achieve zero downtime Web Applications and Wicket Scala on GlassFish and Java EE 6 REST and Java best practices, issues and solutions for the Enterprise Building a RESTful Web Application with JAX-RS and Ext JS 4 Wednesday, Dec 7 Oracle GlassFish Server in the Virtual World JAX-RS 2.0: What's in JSR 339 ? JSF 343: What's coming in Java Message Service 2.0 ? The Great News of JSF 2.0! Thursday, Dec 8 Servlet 3.1 Update Develop, Deploy, and Monitor a Java EE 6 Application with Clustered GlassFish 3.1 Migrating from EJB/SOAP to REST with JAX-RS: The Case of the Central Bank of Brazil GlassFish REST Administration Back End: An Insider look at a real REST Application Scripting and Agile Java EE Applications with Jython And this is Brazil so a fun element is important. There are the usual Caiprihinas, Churrascaria, late night social dinners, community engagement, and multiple other fun activities. Fabiane Nardon and SOUJava gang are also organizing a Geek Bike Ride on the Sunday (Dec 4th) before JavaOne. The 20k ride (map) starts at 7am and goes through the streets of Sao Paulo. This is an opportunity to meet some of the JavaOne speakers and attendees outside the conference. They've even designed a t-shirt and 32 geeks have signed up so far. I'm glad my discussion with Fabiane during FISL early this year for arranging this bike ride is finally taking shape! I'm definitely looking forward to it and will be bringing nice fruity Odwalla bars for all the riders. Be there to ride with me and many others :-) Stay updated by following @oracledobrasil and @javaoneconf. I'll be there, will you ? Don't wait and register now! And in case you are interested in reading about the experience from last year ... it was lot of fun! Just check out a collage of pictures yourself ... And the complete album at:

  Read the article

• Why is my CPU being used while doing nothing?

  - by Jop

  I have installed Ubuntu GNOME in BIOS mode on my MacBook (BIOS mode so that the proprietary NVIDIA drivers work. I need them for gaming.). For some reason, a lot of CPU is being used while not really doing anything. It swings between 20-30% on both cores, usually. But when I look at the list of processes and sort by CPU usage, I do not see anything special. No processes intensively doing anything. How can I fix this? EDIT: Output of top command. jop@jop-MacBook:~$ top top - 17:08:02 up 41 min, 2 users, load average: 0,51, 0,69, 0,95 Tasks: 202 total, 2 running, 200 sleeping, 0 stopped, 0 zombie %Cpu(s): 11,9 us, 5,8 sy, 0,0 ni, 80,3 id, 0,5 wa, 0,0 hi, 1,5 si, 0,0 st KiB Mem: 7908316 total, 2919940 used, 4988376 free, 153248 buffers KiB Swap: 3906244 total, 0 used, 3906244 free, 1326544 cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3785 root 20 0 195m 82m 26m S 22,9 1,1 2:43.77 Xorg 4429 jop 20 0 1543m 150m 60m S 7,3 1,9 1:26.26 compiz 4198 jop 20 0 633m 21m 11m S 1,7 0,3 0:04.96 unity-panel-ser 7425 jop 20 0 564m 18m 12m S 1,7 0,2 0:00.84 gnome-terminal 7019 jop 20 0 806m 89m 46m S 1,0 1,2 0:10.01 chrome 7323 jop 20 0 966m 93m 23m S 1,0 1,2 0:06.85 chrome 6742 root 20 0 0 0 0 S 0,7 0,0 0:00.43 kworker/0:3 3 root 20 0 0 0 0 S 0,3 0,0 0:06.01 ksoftirqd/0 7008 root 20 0 0 0 0 S 0,3 0,0 0:00.27 kworker/1:3 7302 jop 20 0 972m 96m 28m S 0,3 1,2 0:06.32 chrome 7310 jop 20 0 382m 63m 39m S 0,3 0,8 0:00.34 chrome 7498 jop 20 0 24840 1600 1120 R 0,3 0,0 0:00.22 top 1 root 20 0 27176 2944 1412 S 0,0 0,0 0:01.58 init 2 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kthreadd 5 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 kworker/0:0H 6 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kworker/u4:0 7 root rt 0 0 0 0 S 0,0 0,0 0:02.04 migration/0 Even when xorg isn't so busy like when I copied, CPU usage is higher then what the processes use.

  Read the article

• Can a 10-bit monitor connection preserve all tones in 8-bit sRGB gradients on a wide-gamut monitor?

  - by hjb981

  This question is about color management and the use of a higher color depth, 10 bits per channel (30 bits in total, resulting in 1.07 billion colors, or 1024 shades of gray, sometimes referred to as "deep color") compared to the standard of 8 bits per channel (24 bits in total, 16.7 million colors, 256 shades of gray, sometimes referred to as "true color"). Do not confuse with "32 bit color", which usually refers to standard 8 bit color with an extra channel ("alpha channel") for transparency (used to achieve effects like semi-transparent windows etc). The following can be assumed to be in place: 1: A wide-gamut monitor that supports 10-bit input. Further, it can be assumed that the monitor has been calibrated to its native gamut and that an ICC color profile has been created. 2: A graphics card that supports 10-bit output (and is connected to the monitor via DisplayPort). 3: Drivers for the graphics card that support 10-bit output. If applications that support 10-bit output and color profiles would be used, I would expect them to display images that were saved using different color spaces correctly. For example, both an sRGB and an adobeRGB image should be displayed correctly. If an sRGB image was saved using 8 bits per channel (almost always the case), then the 10-bit signal path would ensure that no tonal gradients were lost in the conversion from the sRGB of the image to the native color space of the monitor. For example: If the image contains a pixel that is pure red in 8 bits (255,0,0), the corresponding value in 10 bits would be (1023,0,0). However, since the monitor has a larger color space than sRGB, sending the signal (1023,0,0) to the monitor would result in a red that was too saturated. Therefore, according to the ICC color profile, the signal would be transformed into a different value with less red saturation, for example (987,0,0). Since there are still plenty of levels left between 0 and 987, all 256 values (0-255) for red in the sRGB color space of the file could be uniquely mapped to color-corrected 10-bit values in the monitor's native color space. However, if the conversion was done in 8 bits, (255,0,0) would be translated to (246,0,0), and there would now only be 247 available levels for the red channel instead of 256, degrading the displayed image quality. My question is: how does this work on Ubuntu? Let's say that I use Firefox (which is color-aware and uses ICC color profiles). Would I get 10-bit processing, thus preserving all levels of an 8-bit picture? What is the situation like for other applications, especially photo applications like Shotwell, Rawtherapee, Darktable, RawStudio, Photivo etc? Does Ubuntu differ from other operating systems (Linux and others) on this point?

  Read the article

• Impatient Customers Make Flawless Service Mission Critical for Midsize Companies

  - by Richard Lefebvre

  At times, I can be an impatient customer. But I’m not alone. Research by The Social Habit shows that among customers who contact a brand, product, or company through social media for support, 32% expect a response within 30 minutes and 42% expect a response within 60 minutes! 70% of respondents to another study expected their complaints to be addressed within 24 hours, irrespective of how they contacted the company. I was intrigued when I read a recent blog post by David Vap, Group Vice President of Product Development for Oracle Service Cloud. It’s about “Three Secrets to Innovation” in customer service. In David’s words: 1) Focus on making what’s hard simple 2) Solve real problems for real people 3) Don’t just spin a good vision. Do something about it  I believe midsize companies have a leg up in delivering on these three points, mainly because they have no other choice. How can you grow a business without listening to your customers and providing flawless service? Big companies are often weighed down by customer service practices that have been churning in bureaucracy for years or even decades. When the all-in-one printer/fax/scanner I bought my wife for Christmas (call me a romantic) failed after sixty days, I wasted hours of my time navigating the big brand manufacturer’s complex support and contact policies only to be offered a refurbished replacement after I shipped mine back to them. There was not a happy ending. Let's just say my wife still doesn't have a printer.  Young midsize companies need to innovate to grow. Established midsize company brands need to innovate to survive and reach the next level. Midsize Customer Case Study: The Boston Globe The Boston Globe, established in 1872 and the winner of 22 Pulitzer Prizes, is fighting the prevailing decline in the newspaper industry. Businessman John Henry invested in the Globe in 2013 because he, “…believes deeply in the future of this great community, and the Globe should play a vital role in determining that future”. How well the paper executes on its bold new strategy is truly mission critical—a matter of life or death for an industry icon. This customer case study tells how Oracle’s Service Cloud is helping The Boston Globe “do something about” and not just “spin” it’s strategy and vision via improved customer service. For example, Oracle RightNow Chat Cloud Service is now the preferred support channel for its online environments. The average e-mail or phone call can take three to four minutes to complete while the average chat is only 30 to 40 seconds. It’s a great example of one company leveraging technology to make things simpler to solve real problems for real people. Related: Oracle Cloud Service a leader in The Forrester Wave™: Customer Service Solutions For Small And Midsize Teams, Q2 2014

  Read the article

• Ubuntu is booting on acer e1-510 laptop, but screen displays nothing

  - by user287602

  Tried loading ubuntu 12.04 (32-bit as well 64 bit) through bootable usb , on a brand new 64-bit acer E1-510 laptop. It shows the 'Try ubuntu without installing screen' and I selected that option. But instead of showing ubuntu's logo(which implies it is loading). I get a blank screen. The screen is on, but it shows nothing. I tried the same on an old model laptop acer aspire 5738 and it worked like a charm. However, I realized that Ubuntu is actually booting on E1-510 and only the display is not working. How did I arrive at this conclusion? When I select on 'Try ubuntu without installing screen', after about 8-10 seconds I see that the WiFi indicator light on the laptop panel switches on(just like when we boot up a Windows OS or even Ubuntu ). I got an idea that the system booted Ubuntu. To confirm this, I tried to adjust volume using keyboard shortcuts. Voila, I can hear the sound of adjusting volume! That means it has already booted Ubuntu. I confirmed this with another step. I pressed the power button once and after two seconds I pressed ENTER. It began the process of switching off and within 5 seconds the laptop was powered off. You may ask, Why is this a confirmation that Ubuntu has booted? This is because in Ubuntu when you press on power button, a dialog box opens with shut down, restart, suspend option- and the shut down option is already selected by default; so all I have to do is press ENTER to shut down. This again proved that Ubuntu was indeed up and running. Unlike previous 'AskUbunutu' posts about Acer e1-510, I must mention that my laptop came WITH the Legacy BIOS mode, so its not really a problem to boot ubuntu from a bootable pendrive. Only the screen is not working. In case you need to know, I am running Windows 7-Ultimate 64 bit on acer e1-510.

  Read the article

• CES 2011–Microsoft Keynote Impressions

  - by guybarrette

  Microsoft has been kicking off the CES for a number of years by doing a keynote the evening of the event first day.  This year, SteveB talked about Xbox, Kinect, Windows 7 new laptops, Surface 2 and Windows vNext running on the ARM architecture. Some of the design of the new laptops showed are quite amazing.  This one has a dual screen with no physical keyboard.  The image is split between both screens.  A software keyboard appears when you place your 10 fingers on the lower screen. This one from Samsung has a sliding keyboard somewhat like numerous cell phones have. What I found the most amazing is that Intel was able to miniaturized a full Intel architecture (CPU, motherboard, memory) in a tiny form factor.  Imagine having the power of a full PC running .NET apps in a Zune/iPod form factor! They also showed V2 of the Surface device.  This one is called the Samsung SUR40 for Surface PC.  It’s much sleeker and it will likely loose the BAT (Big Ass Table) moniker  More info here SteveB announced that Windows vNext will run on ARM chips.  I’m intrigued by this announcement (you can read about it here) and I have many questions: -In the past ARM devices were slow, what now makes the ARM architecture able to run Windows? -ARM is 32-bit only, I think. -Does this mean that Intel wasn't able to provide such a lightweight architecture or simply that they weren't interested? -From what I understand, apps would need to be recompiled for ARM. Will we need to do that from an ARM PC or could it be done natively on Intel or on an Intel PC running in an ARM VM?  VS 2012? Ahhhh, smells like a cool PDC is coming up    Clearly it looks like PC have enough power for most of us right now and that the race is now about miniaturization, power consumption and battery life. You can watch the Microsoft CES 2011 keynote here var addthis_pub="guybarrette";

  Read the article

• Once installed geos library (C++, and C), and then trying to install rgeos package (R), it reports geos-config missing!

  - by user1873888

  Knowing that the package rgeos, from the R language, requieres a prior installation of geos libraries, I installed, both, libgeos and libgeos-c1 (3.2.2), using the synaptic installer in my Ubuntu 12.04 (32 bit) machine. Then I tried to install rgeos directly from the R console, and it issued a message in the sense that geos-config was not found. The output is as follows: > install.packages("rgeos") Installing package(s) into ‘/home/checo/R/i486-pc-linux-gnu-library/2.15’ (as ‘lib’ is unspecified) also installing the dependency ‘sp’ probando la URL 'http://cran.rstudio.com/src/contrib/sp_1.0-9.tar.gz' Content type 'application/x-gzip' length 882102 bytes (861 Kb) URL abierta ================================================== downloaded 861 Kb probando la URL 'http://cran.rstudio.com/src/contrib/rgeos_0.2-19.tar.gz' Content type 'application/x-gzip' length 221471 bytes (216 Kb) URL abierta ================================================== downloaded 216 Kb * installing *source* package ‘sp’ ... ** package ‘sp’ successfully unpacked and MD5 sums checked ** libs gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c R centroid.c -o Rcentroid.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c gcdist.c -o gcdist.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c init.c -o init.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c pip.c -o pip.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c pip2.c -o pip2.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c sp_xports.c -o sp_xports.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c surfaceArea.c -o surfaceArea.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c zerodist.c -o zerodist.o gcc -std=gnu99 -shared -o sp.so Rcentroid.o gcdist.o init.o pip.o pip2.o sp_xports.o surfaceArea.o zerodist.o -L/usr/lib/R/lib -lR installing to /home/checo/R/i486-pc-linux-gnu-library/2.15/sp/libs ** R ** data ** demo ** inst ** preparing package for lazy loading ** help *** installing help indices ** building package indices ** installing vignettes ‘intro_sp.Rnw’ ‘over.Rnw’ ** testing if installed package can be loaded * DONE (sp) * installing *source* package ‘rgeos’ ... ** package ‘rgeos’ successfully unpacked and MD5 sums checked configure: CC: gcc -std=gnu99 configure: CXX: g++ configure: rgeos: 0.2-17 checking for /usr/bin/svnversion... no configure: svn revision: 394 checking geos-config usability... ./configure: line 1385: geos-config: command not found no configure: error: geos-config not usable ERROR: configuration failed for package ‘rgeos’ * removing ‘/home/checo/R/i486-pc-linux-gnu-library/2.15/rgeos’ Warning in install.packages : installation of package ‘rgeos’ had non-zero exit status Forgive my ignorance, but I don't know where this file, "geos-config", comes from: should it be generated by the gcc compilations above, or should it be previously installed when the libgeos libraries were intalled? I learnt, from another machine, that "geos-config" is an executable and that it should be installed in /usr/bin. Do you have any idea on what's wrong with my procedure? Thanks, -Sergio.

  Read the article

• Fixing a NoClassDefFoundError

  - by Chris Okyen

  I have some code: package ftc; import java.util.Scanner; public class Fer_To_Cel { public static void main(String[] argv) { // Scanner object to get the temp in degrees Farenheit Scanner keyboard = new Scanner(System.in); boolean isInt = true; // temporarily put as true in case the user enters a valid int the first time int degreesF = 0; // initialy set to 0 do { try { // Input the temperature text. System.out.print("\nPlease enter a temperature (integer number, no fractional part) in degrees Farenheit: "); degreesF = Integer.parseInt(keyboard.next()); // Get user input and Assign the far. temperature variable, which is casted from String to int. } // Let the user know in a user friendly notice that the value entered wasnt an int ( give int value range ) , and then give error log catch(java.lang.Exception e) { System.out.println("Sorry but you entered a non-int value ( needs to be between ( including ) -2,147,483,648 and 2,147,483,647 ).. \n"); e.printStackTrace(); isInt = false; } } while(!isInt); System.out.println(""); // print a new line. final int degreesC = (5*(degreesF-32)/9); // convert the degrees from F to C and store the resulting expression in degreesC // Print out a newline, then print what X degrees F is in Celcius. System.out.println("\n" + degreesF + " degrees Farenheit is " + degreesC + " degrees Celcius"); } } And The following error: C:\Program Files\Java\jdk1.7.0_06\bin>java Fer_To_Cel Exception in thread "main" java.lang.NoClassDefFoundError: Fer_To_Cel (wrong name: ftc/Fer_To_Cel) at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:791) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:14 at java.net.URLClassLoader.defineClass(URLClassLoader.java:449) at java.net.URLClassLoader.access$100(URLClassLoader.java:71) at java.net.URLClassLoader$1.run(URLClassLoader.java:361) at java.net.URLClassLoader$1.run(URLClassLoader.java:355) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:354) at java.lang.ClassLoader.loadClass(ClassLoader.java:423) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308) at java.lang.ClassLoader.loadClass(ClassLoader.java:356) at sun.launcher.LauncherHelper.checkAndLoadMain(LauncherHelper.java:480) The code compiled without compile errors, but presented errors during execution. Which leads me to two questions. I know Errors can be termed Compiler, Runtime and Logic Errors, but the NoClassDefFoundError inherits java.lang.LinkageError. Does that make it a Linker error, being niether of the three types of errors I listed, If I am right this is the answer. For someone else who obtains the singular .java file and compiles it, would this be the only way to solve this problem? Or can I (should I ) do/have done something to fix this problem? Basically, based on a basis of programming, is this a fault of me as the writer? Could this be done once on, my half and be distributed and not needed be done again?

  Read the article

• algorithm for project euler problem no 18

  - by Valentino Ru

  Problem number 18 from Project Euler's site is as follows: By starting at the top of the triangle below and moving to adjacent numbers on the row below, the maximum total from top to bottom is 23. 3 7 4 2 4 6 8 5 9 3 That is, 3 + 7 + 4 + 9 = 23. Find the maximum total from top to bottom of the triangle below: 75 95 64 17 47 82 18 35 87 10 20 04 82 47 65 19 01 23 75 03 34 88 02 77 73 07 63 67 99 65 04 28 06 16 70 92 41 41 26 56 83 40 80 70 33 41 48 72 33 47 32 37 16 94 29 53 71 44 65 25 43 91 52 97 51 14 70 11 33 28 77 73 17 78 39 68 17 57 91 71 52 38 17 14 91 43 58 50 27 29 48 63 66 04 68 89 53 67 30 73 16 69 87 40 31 04 62 98 27 23 09 70 98 73 93 38 53 60 04 23 NOTE: As there are only 16384 routes, it is possible to solve this problem by trying every route. However, Problem 67, is the same challenge with a triangle containing one-hundred rows; it cannot be solved by brute force, and requires a clever method! ;o) The formulation of this problems does not make clear if the "Traversor" is greedy, meaning that he always choosed the child with be higher value the maximum of every single walkthrough is asked The NOTE says, that it is possible to solve this problem by trying every route. This means to me, that is is also possible without! This leads to my actual question: Assumed that not the greedy one is the max, is there any algorithm that finds the max walkthrough value without trying every route and that doesn't act like the greedy algorithm? I implemented an algorithm in Java, putting the values first in a node structure, then applying the greedy algorithm. The result, however, is cosidered as wrong by Project Euler. sum = 0; void findWay(Node node){ sum += node.value; if(node.nodeLeft != null && node.nodeRight != null){ if(node.nodeLeft.value > node.nodeRight.value){ findWay(node.nodeLeft); }else{ findWay(node.nodeRight); } } }

  Read the article

• How to troubleshoot ethernet port on laptop

  - by Psallas Vassilios

  I have a problem with my wired connection. To be more specific, my laptop doesn't seems to recognize that I have plugged in an ethernet cable. I tried to download new drivers for my ethernet card, but I couldn't find any solutions. Maybe because I am new to Linux, so I'm not familiar with running commands in the terminal. OK I have typed the command and here are the results: 00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02) For the second reply I don't know if the following is what you asked me: ?Memory: 3.9 GiB ?Processor: Intel Core 2 Duo CPU P8800 @ 2.66GHz × 2 ?OS type: 32-bit My Ethernet connection had some problem on Windows too. I have changed recently my internet provider, and since then my ethernet cable is not recognized by the laptop. At that time I was still on Windows. I thought that with Ubuntu the problem would be solved, but unfortunately the problem still persists. If someone can help me to solve my problem I'll be thankful. Here are the results of the three first commands you told me to run: lsmod | grep sis190 sis190 22570 0 sudo modprobe sis190 ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:90:81:7e UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:185 errors:0 dropped:0 overruns:0 frame:0 TX packets:185 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22672 (22.6 KB) TX bytes:22672 (22.6 KB) wlan0 Link encap:Ethernet HWaddr 00:25:d3:2c:3a:ae inet addr:192.168.1.72 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe2c:3aae/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:260 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:71992 (71.9 KB) TX bytes:52000 (52.0 KB) and the results of running the last two commands: dmesg | grep -e eth -e sis190 [ 0.816667] sis190: sis190 Gigabit Ethernet driver 1.4 loaded [ 0.816728] sis190 0000:00:04.0: setting latency timer to 64 [ 0.816751] sis190: 0000:00:04.0: Read MAC address from EEPROM [ 0.904032] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at address [ 1.416030] sis190: 0000:00:04.0: Using transceiver at address 1 as default [ 1.448235] sis190 0000:00:04.0: eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8410000 (IRQ: 19), 00:90:f5:90:81:7e [ 1.448238] sis190 0000:00:04.0: eth0: GMII mode. [ 1.448243] sis190 0000:00:04.0: eth0: Enabling Auto-negotiation [ 11.560907] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372019] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.424038] sis190 0000:00:04.0: eth0: auto-negotiating... nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: sis190 State: unavailable Default: no HW Address: 00:90:F5:90:81:7E Capabilities: Carrier Detect: yes Wired Properties Carrier: off

  Read the article

• Problem getting GOBI 2000 HS to work

  - by Zypher

  I've been trying to get my integrated GOBI WWAN card to work under 10.10 for a while now. I was able to get the network manager to see the card after installing the gobi-loader package. I was able to setup the connection, but i cannot establish a connection to Verizon. Below is the output from /var/log/daemon.log as i try to connect. Oct 19 14:29:42 gbeech-x201 AptDaemon: INFO: Quiting due to inactivity Oct 19 14:29:42 gbeech-x201 AptDaemon: INFO: Shutdown was requested Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> Activation (ttyUSB0) starting connection 'Verizon connection' Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> (ttyUSB0): device state change: 3 -> 4 (reason 0) Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled... Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started... Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> (ttyUSB0): device state change: 4 -> 6 (reason 0) Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete. Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled... Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started... Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> (ttyUSB0): device state change: 6 -> 4 (reason 0) Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete. Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <warn> CDMA connection failed: (32) No service Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <info> (ttyUSB0): device state change: 4 -> 9 (reason 0) Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <info> Marking connection 'Verizon connection' invalid. Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <warn> Activation (ttyUSB0) failed. Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <info> (ttyUSB0): device state change: 9 -> 3 (reason 0) Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <info> (ttyUSB0): deactivating device (reason: 0). Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <info> Policy set 'Auto SO-GUEST' (wlan0) as default for IPv4 routing and DNS. Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <info> Policy set 'Auto SO-GUEST' (wlan0) as default for IPv4 routing and DNS.

  Read the article

• eSTEP Newsletter for October 2013 now available

  - by uwes

  Dear Partners,We would like to let you know that the October'13 issue of our Newsletter is now available.The issue contains information on the following topics: Oracle Open World Summary Oracle Cloud: Oracle Engineered Systems Oracle Database and Middleware Oracle Applications and Software as a Service Oracle Industries Oracle Partners and the "Internet of Things" JavaOne News MySQL News Corporate News Create Your HR Strategic Vision at Oracle HCM World Oracle Database Protection Redefined A Preview: Oracle Database Backup Logging Recovery Appliance Oracle closed Tekelec acquisition Congratulations to ORACLE TEAM USA! Tech sectionARC M6 Oracle's SPARC M6 Oracle SuperCluster M6-32 - Oracle’s Most Scalable Engineered System Oracle Multitenant on SPARC Servers and Oracle Solaris Oracle Database 12c Enterprise Edition: Plug into the Cloud Oracle In-Memory Database Cache Oracle Virtual Compute Appliance New Benchmark-Results published (Sept. 2013) Video Interview: Elasticity, the Biggest Challenge Facing Data Centers Today Tech blog Announcing New Sun Storage 2500-M2 Drives SPARC Product Line Update ZFS RAID Calculator v6 What ships with ODA X3-2? Tech Article: Oracle Multitenant on SPARC Servers and Oracle Solaris New release of Sun Rack II capacity calculator available Announcing: Oracle Solaris Cluster Product Bulletin, September 2013 Learning & events Planned TechCasts Quarterly Partner Update Live Webcast: Simplify and Accelerate Oracle Database deployment with Oracle VM Templates Join us for OTN's Virtual Developer Day - Harnessing the Power of Oracle WebLogic and Oracle Coherence.Learn from OOW 2013 what is going on in Virtualization How to Implementing Early Arriving Facts in ODI, Part I and Part II: Proof of Concept Overview Multi-Factor Authentication in Oracle WebLogic Using multi-factor authentication to protect web applications deployed on Oracle WebLogic. If Virtualization Is Free, It Can't Be Any Good—Right? Looking beyond System/HW SOA and User Interfaces Overcoming the challenges to developing user interfaces in a service oriented References Vodafone Romania Improves Business Agility and Customer Satisfaction, with 10x Faster Business Intelligence Delivery and 12x Faster Processing Emirates Integrated Telecommunications Captures 47% Market Share in a Competitive Market, Thanks to 24/7 Availability Home Credit and Finance Bank Accelerates Getting New Banking Products to Market Extra A Conversation with Java Champion Johan VosYou can find the Newsletter on our portal under eSTEP News ---> Latest Newsletter. You will need to provide your email address and the pin below to get access. Link to the portal is shown below.URL: http://launch.oracle.com/PIN: eSTEP_2011Previous published Newsletters can be found under the Archived Newsletters section and more useful information under the Events, Download and Links tab. Feel free to explore and any feedback is appreciated to help us improve the service and information we deliver.Thanks and best regards,Partner HW Enablement EMEA

  Read the article

• Why wifi doesn't work in this case?

  - by xRobot

  I have a brand new notebook where I have installed Windows 7 and Ubuntu 12.04 LTS 64bit in dual boot. In windows 7 wifi works but in Ubuntu not. Could you help me please ? iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off eth0 no wireless extensions. lshw -C network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 07 serial: b4:b5:1f:1b:9a:56 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:3000(size=256) memory:c2404000-c2404fff memory:c2400000-c2403fff *-network description: Wireless interface product: Ralink corp. vendor: Ralink corp. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 84:4b:f4:0a:3a:22 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.2.0-31-generic firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:c2500000-c250ffff lspci | grep -i net 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) 02:00.0 Network controller: Ralink corp. Device 539a iwlist scan lo Interface doesn't support scanning. wlan0 Interface doesn't support scanning : Device or resource busy eth0 Interface doesn't support scanning. lsmod Module Size Used by rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 224173 1 joydev 17693 0 hp_wmi 18092 0 sparse_keymap 13890 1 hp_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq psmouse 97362 0 snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device arc4 12529 2 rt2800pci 18715 0 rt2800lib 58925 1 rt2800pci crc_ccitt 12667 1 rt2800lib rt2x00pci 14577 1 rt2800pci rt2x00lib 51144 3 rt2800pci,rt2800lib,rt2x00pci mac80211 506816 3 rt2800lib,rt2x00pci,rt2x00lib soundcore 15091 1 snd mac_hid 13253 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev wmi 19256 1 hp_wmi i915 473240 3 cfg80211 205544 2 rt2x00lib,mac80211 eeprom_93cx6 12725 1 rt2800pci drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 serio_raw 13211 0 video 19596 1 i915 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid r8169 62099 0 rfkill list: # rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Why does the login screen fail to appear?

  - by a different ben

  My system: Dell Precision T3500 nVidia Quadro NVS 295 Ubuntu 12.04 x86_64 (3.2.0-32) Essential problem: On boot my system won't get past the splash screen. I can switch to another virtual terminal and log in, I can also ssh from another system -- so it appears that the problem might be with the display manager. How can I diagnose and fix this problem? More info: From a VT I can issue sudo lightdm restart, and this will bring up the login screen and and I can continue from there. So I do have access to my system. Update-manager recently updated a number of packages, including a bunch of x11 and xorg packages, some nVidia drivers, rpcbind, etc etc. My boot log (if that is any guidance) says the following: fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 rpcbind: Cannot open '/run/rpcbind/rpcbind.xdr' file for reading, errno 2 (No such file or directory) rpcbind: Cannot open '/run/rpcbind/portmap.xdr' file for reading, errno 2 (No such file or directory) /dev/sda1: clean, 597650/1525920 files, 3963433/6103296 blocks /dev/sda7: clean, 11/6406144 files, 450097/25608703 blocks /dev/sda5: clean, 158323/1525920 files, 1886918/6103296 blocks /dev/sda8: clean, 250089/107929600 files, 111088810/431689728 blocks Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles [80G [74G[ OK ] Loading the saved-state of the serial devices... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A * Starting ClamAV virus database updater freshclam [80G [74G[ OK ] * Starting Name Service Cache Daemon nscd [80G [74G[ OK ] * Starting modem connection manager[74G[ OK ] * Starting K Display Manager[74G[ OK ] * Starting mDNS/DNS-SD daemon[74G[ OK ] * Stopping GNOME Display Manager[74G[ OK ] * Stopping K Display Manager[74G[ OK ] * Starting bluetooth daemon[74G[ OK ] * Starting network connection manager[74G[ OK ] * Starting Postfix Mail Transport Agent postfix [80G [74G[ OK ] speech-dispatcher disabled; edit /etc/default/speech-dispatcher * Starting VirtualBox kernel modules [80G [74G[ OK ] * Starting the Winbind daemon winbind [80G [74G[ OK ] saned disabled; edit /etc/default/saned * Starting anac(h)ronistic cron[74G[ OK ] * Stopping anac(h)ronistic cron[74G[ OK ] * Checking battery state... [80G [74G[ OK ] nxsensor is disabled in '/usr/NX/etc/node.cfg' Trying to start NX server: NX 122 Service started. NX 999 Bye. Trying to start NX statistics: NX 723 Cannot start NX statistics: NX 709 NX statistics are disabled for this server. NX 999 Bye. * Stopping System V runlevel compatibility[74G[ OK ] * Starting Mount network filesystems[74G[ OK ] * Stopping Mount network filesystems[74G[ OK ] * Stopping regular background program processing daemon[74G[ OK ] * Starting regular background program processing daemon[74G[ OK ] * Starting anac(h)ronistic cron[74G[ OK ] * Stopping anac(h)ronistic cron[74G[ OK ]

  Read the article

• Profiling Startup Of VS2012 &ndash; Ants Profiler

  - by Alois Kraus

  I just downloaded ANTS Profiler 7.4 to check how fast it is and how deep I can analyze the startup of Visual Studio 2012. The Pro version which is useful does cost 445€ which is ok. To measure a complex system I decided to simply profile VS2012 (Update 1) on my older Intel 6600 2,4GHz with 3 GB RAM and a 32 bit Windows 7. Ants Profiler is really easy to use. So lets try it out. The Ants Profiler does want to start the profiled application by its own which seems to be rather common. I did choose Method Level timing of all managed methods. In the configuration menu I did want to get all call stacks to get full details. Once this is configured you are ready to go.   After that you can select the Method Grid to view Wall Clock Time in ms. I hate percentages which are on by default because I do want to look where absolute time is spent and not something else.   From the Method Grid I can drill down to see where time is spent in a nice and I can look at the decompiled methods where the time is spent. This does really look nice. But did you see the size of the scroll bar in the method grid? Although I wanted all call stacks I do get only about 4 pages of methods to drill down. From the scroll bar count I would guess that the profiler does show me about 150 methods for the complete VS startup. This is nonsense. I will never find a bottleneck in VS when I am presented only a fraction of the methods that were actually executed. I have also tried in the configuration window to also profile the extremely trivial functions but there was no noticeable difference. It seems that the Ants Profiler does filter away way too many details to be useful for bigger systems. If you want to optimize a CPU bound operation inside NUnit then Ants Profiler is with its line level timings a very nice tool to work with. But for bigger stuff it is certainly not usable. I also do not like that I must start the profiled application from the profiler UI. This makes it hard to profile processes which are started by some other process. Next: JetBrains dotTrace

  Read the article

• what's wrong with my sitemap?

  - by cadrian

  Google Webmaster Tools says that my sitemap is in a wrong format. I don't see my mistake, I think I followed every guideline provided by Google. Can someone help me? <?xml version="1.0" encoding="UTF-8"?> <urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9"> <url> <loc>http://www.vocalcontraste.fr/</loc> </url> <url> <loc>http://www.vocalcontraste.fr/presentation/</loc> <lastmod>2012-01-30T21:49:06+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/les-concerts/</loc> <lastmod>2012-12-13T21:55:00+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/ecoutez-contraste/</loc> <lastmod>2012-07-13T18:19:45+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/repertoire/</loc> <lastmod>2012-07-13T17:30:14+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/la-presse/</loc> <lastmod>2012-07-11T08:17:48+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/recrutement/</loc> <lastmod>2012-02-01T22:22:03+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/nos-partenaires/</loc> <lastmod>2012-07-11T07:43:31+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/contactez-nous/</loc> <lastmod>2012-02-02T19:01:32+01:00</lastmod> </url> </urlset>

  Read the article

• No wireless connection using a conceptronic c54i (RT2561/RT61 rev B)

  - by jrosell

  Detected but not working. New install on ubuntu 11.10 using coneptronic C54Ri. As documentation says it uses Ralink drivers.... Any ideas why my wireless does not work? $ lspci -nn | grep -i 'ralink' 01:05.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:90:e5:af:13 inet addr:192.168.0.197 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::21e:90ff:fee5:af13/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28361 errors:0 dropped:0 overruns:0 frame:0 TX packets:16858 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:39812172 (39.8 MB) TX bytes:1633405 (1.6 MB) Interrupt:43 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6608 (6.6 KB) TX bytes:6608 (6.6 KB) iwconfig wlan0 wlan0 IEEE 802.11abg ESSIDff/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thrff Fragment thrff Power Managementff lsmod | grep rt rt61pci 27493 0 crc_itu_t 12627 1 rt61pci rt2x00pci 14202 1 rt61pci rt2x00lib 48114 2 rt61pci,rt2x00pci mac80211 272785 2 rt2x00pci,rt2x00lib cfg80211 172392 2 rt2x00lib,mac80211 eeprom_93cx6 12653 1 rt61pci parport_pc 32114 1 parport 40930 3 ppdev,parport_pc,lp lsmod | grep rt [ 2497.816989] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.827112] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.837430] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847528] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847632] phy0 -> rt61pci_wait_bbp_ready: Error - BBP register access faile d, aborting. [ 2497.847637] phy0 -> rt61pci_set_device_state: Error - Device failed to enter state 4 (-5). sudo lshw -C network *-network DISABLED description: Wireless interface product: RT2561/RT61 rev B 802.11g vendor: Ralink corp. physical id: 5 bus info: pci@0000:01:05.0 logical name: wlan0 version: 00 serial: fa:b8:14:58:62:35 width: 32 bits clock: 33MHz capabilities: pm cap_list ethernet physical wireless configuration: broadcast=yes driver=rt61pci driverversion=3.0.0-12-generic firmware=0.8 latency=0 link=no multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:fdef8000-fdefffff iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan0 Failed to read scan data : Network is down uname -mr 3.0.0-12-generic i686 Edit 1 $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no On reboot, sudo lshw -C network returns network is ok. Hovever, WPA keeps on asking the wireless key

  Read the article

• How do we provide valid time estimates during Sprint Planning without doing "too much" design?

  - by Michael Edenfield

  My team is getting up to speed with Scrum, but most of us are more familiar with non-agile or "pseudo-"agile methodologies. The part that is the biggest hurdle for us is running an efficient Sprint Planning meeting where we break our backlog items into tasks, and estimate hours. (I'm using the terminology from the VS2010 Scrum Template; apologies if I use the wrong word somewhere.) When we try to figure out how long a task is going to take, we often fall into the trap of designing the feature at the code level -- table layout, interfaces, etc -- in order to figure out how long that's going to take. I'm pretty sure this is not the appropriate place to be doing that kind of design. We should be scheduling tasks for these design meetings during the sprint. However, we are having trouble figuring out how else to come up with meaningful estimates for the tasks. Are there any practical habits/techniques/etc. for making a judgement call about how long a feature is going to take, without knowing how you plan to implement it? If our time estimates are going to change significantly once the design has been completed, how can we properly budget our Sprint backlog ahead of time? EDIT: Just to clarify, since some of the comments/answers are very valid but I think addressing the wrong question. We know that what we're doing is not right, and that we should be building time into the sprint for this design. Conceptually all of the developers understand that. We also also bringing in a team member with Scrum experience to keep us on track if we start going off into the weeds. The problem is that, without going through this design process, we are finding it difficult to provide concrete time estimates for anything. We are constantly saying things like "well if we design it this way it might take 8 hours but if we end up having to do this other way instead that will take about 32 but it might not be as bad once we start trying to write it...". I also assume that this process will get better once we have some historical velocity to work from, but many of the technologies and architectural patterns we are using are new to us. But if potentially-wildly-wrong estimates are just a natural part of adapting this process then we will just need to recondition ourselves to accept that :)

  Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >