Search Results

Search found 6017 results on 241 pages for 'universal records managem'.

Page 188/241 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

• Sharing one static ip for both ftp and www service

  - by user11496

  Trying to figure out how to update the Zone record and configure webserver so that one application on the webserver is accessible by public. I'm completely not good at NS/DNS/NAT/firewall/routing/port forwarding/networking etc. "faraday" is the intranet name. Everyone within local network can access all applications hosted on "faraday". Hostname for webserver is "www", FTP server is "ftpserver". Both servers running RHEL4 OS. The goal is to allow anyone outside the company network (public) to access only one of the many applications on "faraday". Hope somebody can help me with some of the questions below, if not all. From zoneedit record, the static IP is used by FTP now. Can I use the same existing static IP - 219.95.10.100, for web service? Currently anyone who enter "http://www.abc.com.my" will be directed to "http://www.abc.com". I don't want this to change. Currently, no one else, except employee on local network, can access "faraday" web pages. How to configure so that when anyone type "http://thisapp.abc.com.my" on their web browser, the url will lead them to "http://faraday/thisapp" (application folder is /var/www/html/thisapp on RHEL4 web server). If possible, how to set the URL will continue to show "http://thisapp.abc.com.my" instead of "http://faraday/thisapp" How to limit/restrict user (those who are not from local network) so they only have access to "http://thisapp.abc.com.my", but not "http://faraday" or "http://faraday/anotherapp", etc. What's the configuration changes needed in /etc/httpd.conf on web server? Company domain name is "abc.com.my". Following is the zone records on www.zoneedit.com. Subdomain Type IP sdsl A 219.95.10.100 ftp CNAME sdsl.abc.com.my @ NS ns3.zoneedit.com @ NS ns7.zoneedit.com WebForward record: New Domain Destination Cloaked www.abc.com.my http://www.abc.com N On my local DNS server, there are 2 zone files: abc.com.my and pnmy.abc.com. > cat abc.com.my.zone ftp CNAME ftp.pnmy.abc.com. sdsl A 219.95.10.100 > cat pnmy.abc.com.zone ftp CNAME ftpserver ftpserver A 172.16.5.1 faraday CNAME www www A 172.16.5.2

  Read the article

• Using HBase or Cassandra for a token server

  - by crippy

  I've been trying to figure out how to use HBase/Cassandra for a token system we're re-implementing. I can probably squeeze quite a lot more from MySQL, but it just seems it has come to clinging on to the wrong tool for the task just because we know it well. Eventually will hit a wall (like happened to us in other areas). Naturally I started looking into possible NoSQL solutions. The prominent ones (at least in terms of buzz) are HBase and Cassandra. The story is more or less like this: A user can send a gift other users. Each gift has a list of recipients or is public in which case limited by number or expiration date For each gift sent we generate some token that uniquely identifies that gift. For each gift we track the list of potential recipients and their current status relating to that gift (accepted, declinded etc). A user can request to see all his currently pending gifts A can request a list of users he has sent a gift to today (used to limit number of gifts sent) Required the ability to "dump" or "ignore" expired gifts (x day old gifts are considered expired) There are some other requirements but I believe the above covers the essentials. How would I go and model that using HBase or Cassandra? Well, the wall was performance. A few 10s of millions of records per day over 2 tables kept for 2 weeks (wish I could have kept it for more but there was no way). The response times kept getting slower and slower until eventually we had to start cutting down number of days we kept data. Caching helps here but it's not an ideal solution since a big part of the ops are updates. Also, as I hinted in my original post. We use MySQL extensively. We know exactly what it can and can't do both in naive implementations followed by native partitioning and finally by horizontally sharding our dataset on the application level to reside on multiple DB nodes. It can be done, but that's not really what I'm trying to get from this. I asked a very specific question about designing a solution using a NoSQL solution since it's very hard to find examples for designs out there. Brainlag, not trying to come off as rude. I actually appreciate it a lot that you are the only one who even bothered to respond. but I see it over and over again. People ask questions and others assume they have no idea what they're talking about and give an irrelevant answer. Ignore RDBMS please. The question is about nosql.

  Read the article

• How to customize web app template admintasia? [closed]

  - by Balaji

  The below is my requirement, Login page Login page for all To search whether a user-id & password are a valid or not. To identify whether the user is of which category, namely, Admin, Manager, User. Redirect the page accordingly for respective user with their privilege. Admin - Manager – User Forgot password, Get username of email address and send the credential by validating the user input. Login & Operations Admin Display all submitted forms by admin, manager and user Tabs – Submissions, Mange form & Manage users. Submissions There must be a ‘sort’, listing, admin, manager and user. Username column should hyper link to edit the user account There must be a ‘sort’ option as ‘ALL’ while this option is chosen; the admin must be capable to view, as below, If Admin selects ‘admin’ from dropdown all submitted forms by admin user accounts should display and this operation is similar for the manager account as above. Manage forms, Agent Name, Credit Site, Lenders, Type of Loan, No Scores and Type Of Card Add, edit, update, delete Active and inactive Always display active records. Manage users, Create a user, User account type, (Admin or Manager or User) User email option Edit & update user, Change username Prompt: are you sure? Change password Prompt: are you sure? Delete user Prompt: are you sure you want to delete? Edit – value – this value should be updated in the common form used by all type of users. Manager Display all submitted forms by managers and users. Submissions and Manage users, Submissions Operations Admin Create filter values, admin, manager and user. Edit - filter values, admin, manager and user. Delete filter values, admin, manager and user. View. Manager Create a user only. View forms. User view and/ or submit form only Logout Log out for all. Prompt: Are you sure you want to log-out. I have downloaded adminstasia. How do I customize this template for the above requirement? The installation is same alike if you check this URL, http://www.admintasia.com/demo/

  Read the article

• Use Expressions with LINQ to Entities

  - by EltonStoneman

  [Source: http://geekswithblogs.net/EltonStoneman] Recently I've been putting together a generic approach for paging the response from a WCF service. Paging changes the service signature, so it's not as simple as adding a behavior to an existing service in config, but the complexity of the paging is isolated in a generic base class. We're using the Entity Framework talking to SQL Server, so when we ask for a page using LINQ's .Take() method we get a nice efficient SQL query for just the rows we want, with minimal impact on SQL Server and network traffic. We use the maximum ID of the record returned as a high-water mark (rather than using .Skip() to go to the next record), so the approach caters for records being deleted between page requests. In the paged response we include a HasMorePages indicator, computed by comparing the max ID in the page of results to the max ID for the whole resultset - if the latter is bigger, then there are more pages. In some quick performance testing, the paged version of the service performed much more slowly than the unpaged version, which was unexpected. We narrowed it down to the code which gets the max ID for the full resultset - instead of building an efficient MAX() SQL query, EF was returning the whole resultset and then computing the max ID in the service layer. It's easy to reproduce - take this AdventureWorks query:             var context = new AdventureWorksEntities();             var query = from od in context.SalesOrderDetail                         where od.ModifiedDate >= modified                          && od.SalesOrderDetailID.CompareTo(id) > 0                         orderby od.SalesOrderDetailID                         select od;   We can find the maximum SalesOrderDetailID like this:             var maxIdEfficiently = query.Max(od => od.SalesOrderDetailID);   which produces our efficient MAX() SQL query. If we're doing this generically and we already have the ID function in a Func:             Func<SalesOrderDetail, int> idFunc = od => od.SalesOrderDetailID;             var maxIdInefficiently = query.Max(idFunc);   This fetches all the results from the query and then runs the Max() function in code. If you look at the difference in Reflector, the first call passes an Expression to the Max(), while the second call passes a Func. So it's an easy fix - wrap the Func in an Expression:             Expression<Func<SalesOrderDetail, int>> idExpression = od => od.SalesOrderDetailID;             var maxIdEfficientlyAgain = query.Max(idExpression);   - and we're back to running an efficient MAX() statement. Evidently the EF provider can dissect an Expression and build its equivalent in SQL, but it can't do that with Funcs.

  Read the article

• How to implement a component based system for items in a web game.

  - by Landstander

  Reading several other questions and answers on using a component based system to define items I want to use one for the items and spells in a web game written in PHP. I'm just stuck on the implementation. I'm going to use a DB schema suggested in this series (part 5 describes the schema); http://t-machine.org/index.php/2007/09/03/entity-systems-are-the-future-of-mmog-development-part-1/ This means I'll have an items table with generic item properties, a table listing all of the components for an item and finally records in each component table used to make up the item. Assuming I can select the first two together in a single query, I'm still going to do N queries for each component type. I'm kind of fine with this because I can cache the data into memcache and check there first before doing any queries. I'll need to build up the items on every request they are used in so the implementation needs to be on the lean side even if they're pulled from memcache. But right there is where I feel confident about implementing a component system for my items ends. I figure I'd need to bring attributes and behaviors into the container from each component it uses. I'm just not sure how to do that effectively and not end up writing a lot of specialized code to deal with each component. For example an AttackComponent might need to know how to filter targets inside of a battle context and also maybe provide an attack behavior. That same item might also have a UsableComponent which allows the item to be used and apply some effect onto a different set of targets filtered differently from the same battle context. Then not every part of an item is an active part, an AttributeBonusComponent might need to only kick in when the item is in an equipped state or when displaying the item details page. Ultimately, how should I bring all of the components together into the container so when I use an item as a weapon I get the correct list of targets? Know when a weapon can also be used as an item? Or to apply the bonuses the item provides to a character object? I feel like I've gone too far down the rabbit hole and I can't grasp onto the simple solution in front of me. (If that makes any sense at all.) Likewise if I were to implement the best answer from here I feel like I'd have a lot of the same questions. How to model multiple "uses" (e.g. weapon) for usable-inventory/object/items (e.g. katana) within a relational database.

  Read the article

• How to use multiple search keys?

  - by user32565

  I have a database wherein the files are named abcd100.00b, abcd101.00b, etc. I need a code where when the user enters abcd separate then 100 to 110, all the files with the name abcd and in the range 100 to 110 should get displayed now the following code can display only the first four characters. How do I implement this? <?php //capture search term and remove spaces at its both ends if the is any $searchTerm = trim($_GET['keyname']) ; //check whether the name parsed is empty if($searchTerm == "rinex_file") { echo "Enter name you are searching for."; exit(); } if($searchTerm == "rinex_file") { echo "Enter name you are searching for."; exit(); } //database connection info $host = "localhost"; //server $db = "rinex"; //database name $user = "m"; //dabases user name $pwd = "c"; //password //connecting to server and creating link to database $link = mysqli_connect($host, $user, $pwd, $db); //MYSQL search statement $query = "SELECT * FROM rinexo WHERE rinex_file LIKE '%$searchTerm%'"; $results = mysqli_query($link, $query) ; /* check whethere there were matching records in the table by counting the number of results returned */ if(mysqli_num_rows($results) >= 1){ echo '<table border="1"> <tr> <th>rinex version</th> <th>program</th> <th>date</th> <th>maker name</th> <th>maker number</th> <th>observer</th> <th>agency</th> <th>position_X_Y_Z</th> </tr>'; while($row = mysqli_fetch_array($results)){ echo '<tr> <td>'.$row['rinex_version'].'</td> <td>'.$row['pgm'].'</td> <td>'.$row['date'].'</td> <td>'.$row['marker_name'].'</td> <td>'.$row['marker_no'].'</td> <td>'.$row['observer'].'</td> <td>'.$row['agency'].'</td> <td>'.$row['position_X_Y_Z'].'</td> </tr>'; } echo '</table>'; }else{ echo "There was no matching record for the name " . $searchTerm; }

  Read the article

• How to have mulptiple search keys using one filename

  - by user107020

  I have a database wherein the files are named abcd100.00b, abcd101.00b,..... i need a code where wen the user enters abcd separate then 100 to 110 . all the files with the name abcd and in the range 100 to 110 should get displayed now the following code can display pnly the first four characters how do i implement this?????? <?php //capture search term and remove spaces at its both ends if the is any $searchTerm = trim($_GET['keyname']) ; //check whether the name parsed is empty if($searchTerm == "rinex_file") { echo "Enter name you are searching for."; exit(); } if($searchTerm == "rinex_file") { echo "Enter name you are searching for."; exit(); } //database connection info $host = "localhost"; //server $db = "rinex"; //database name $user = "m"; //dabases user name $pwd = "c"; //password //connecting to server and creating link to database $link = mysqli_connect($host, $user, $pwd, $db); //MYSQL search statement $query = "SELECT * FROM rinexo WHERE rinex_file LIKE '%$searchTerm%'"; $results = mysqli_query($link, $query) ; /* check whethere there were matching records in the table by counting the number of results returned */ if(mysqli_num_rows($results) >= 1){ echo '<table border="1"> <tr> <th>rinex version</th> <th>program</th> <th>date</th> <th>maker name</th> <th>maker number</th> <th>observer</th> <th>agency</th> <th>position_X_Y_Z</th> </tr>'; while($row = mysqli_fetch_array($results)){ echo '<tr> <td>'.$row['rinex_version'].'</td> <td>'.$row['pgm'].'</td> <td>'.$row['date'].'</td> <td>'.$row['marker_name'].'</td> <td>'.$row['marker_no'].'</td> <td>'.$row['observer'].'</td> <td>'.$row['agency'].'</td> <td>'.$row['position_X_Y_Z'].'</td> </tr>'; } echo '</table>'; }else{ echo "There was no matching record for the name " . $searchTerm; }

  Read the article

• What exactly is a X-YMailISG header?

  - by iainH

  Finally ... our emails are being seen by Yahoo! not as junk anymore. Hurray! However I notice that the Yahoo! receiving MTA adds in a X-YMailISG header. It's very large ... 2**10 bits? Now that I've invested too large a chunk of my waking life in crafting our email headers I'm curious to know what an X-YMailISG header is. Can anybody tell me? Does it pose any security / authenticity issues? There's very little intelligible from Google results. Background: After many days tweaking TXT records in our domain's DNS zone file for SPF and DKIM, I have at last succeeded in generating email from our Drupal site that Yahoo! no longer marks as X-YahooFilteredBulk and the excellent service [email protected] returns results that show the emails passing SPF, DKIM and Sender-ID checks and appearing to SpamAssassin as ham. Yahoo! even adds a Received-SPF: pass header. Useful links: http://www.goldfisch.at/knowwiki/howtos/dkim-filter http://old.openspf.org/wizard.html Strangely enough the SPF TXT record needed / allowed a blank key / name field in our registrar's DNS management panel whereas the DKIM record needed the {selector}._domainkey as the key /name of the DKIM strings.

  Read the article

• Using dd-wrt Dynamic DNS client with CloudFlare

  - by Roman

  I'm trying to configure Dynamic DNS client on my router with dd-wrt (v24-sp2) firmware so it would dynamically change IP address in one of the DNS records. Unfortunately I encountered a problem… Here is an example request from their ddclient configuration: https://www.cloudflare.com/api.html?a=DIUP&u=<my_login>&tkn=<my_token>&ip=<my_ip>&hosts=<my_record> It works if I use it in browser, but in dd-wrt I get this output: Tue Jan 24 00:36:47 2012: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Tue Jan 24 00:36:47 2012: I:INADYN: IP address for alias '<my_record>' needs update to '<my_ip>' Tue Jan 24 00:36:48 2012: W:INADYN: Error validating DYNDNS svr answer. Check usr,pass,hostname! (HTTP/1.1 303 See Other Server: cloudflare-nginx Date: Mon, 23 Jan 2012 14:36:48 GMT Content-Type: text/plain Connection: close Expires: Sun, 25 Jan 1981 05:00:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Location: https://www.cloudflare.com/api.html?a=DIUP&u=<my_login>&tkn=<my_token>&ip=<my_ip>&hosts=<my_record> Vary: Accept-Encoding Set-Cookie: __cfduid=<id>; expires=Mon, 23-Dec-2019 23:50:00 GMT; path=/; domain=.cloudflare.com Set-Cookie: __cfduid=<id>; expires=Mon, 23-Dec-2019 23:50:00 GMT; path=/; domain=.www.cloudflare.com You must include an `a' paramiter, with a value of DIUP|wl|chl|nul|ban|comm_news|devmode|sec_lvl|ipv46|ob|cache_lvl|fpurge_ts|async|pre_purge|minify|stats|direct|zone_check|zone_ips|zone_errors|zone_agg|zone_search|zone_time|zone_grab|app|rec_se URL from "Location" works perfectly and parameter "a" is included. What's the problem?

  Read the article

• Intermittent Windows Server 2008 BSOD and restart

  - by Timka

  Our EC2 Instance (Windows Server 2008) crashed multiple times for the past 3 months (last time was today at 1:05 EST). Upon reviewing MEMORY.DMP file we noticed that possible cause of the crashes is rhelnet.sys (RedHat PV NIC Driver). Server's Event Viewer has the following records right after the crash: Critical - Kernel Power: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. BugCheck: The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x000000000000002d, 0x0000000000000002, 0x0000000000000000, 0xfffff88001402d14). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 100113-35849-01. Could this be a hardware issue? Would it help if we stop and start the instance? Or is this more likely that this is caused by the software running on the system? [Update 10.01.2013] Amazon Rep suggested to update RH drivers to Citrix PV drivers on our instance: Upgrading PV Drivers [Update 10.08.2013] We performed a drivers upgrade on the cloned instance. Right after the upgrade we noticed the following errors in our Event viewer: Xennet6 errors in Event Viewer (Event ID# 5001) After digging a bit more I found this article suggesting to install the latest Citrix drivers. Unfortunately, this didn't help us at all and our cloned instance became unresponsive. [Update 10.08.2013 2] I recreated an instance and updated PV drivers again. After searching on Internet I found this article where Amazon Rep explains that: "Event ID 5001 from source Xennet6 cannot be found" message does not indicate anything wrong, just that the PV driver is looking for a feature that we have not implemented in our version of Xen. I will keep my test system running for a while to see if there any issues with it.

  Read the article

• How do I install and use the cli53 tools on Windows?

  - by pavlos

  I'm trying to find the simplest way to import a large number of BIND zone files in to Route 53. I've had a quick look at the AWS CLI and AWS Tools for Windows PowerShell but they don't seem to include a zone file import option like the AWS Route53 GUI does. The cli53 utility on the other hand does, but is written in Python and appears to have a series of pre-requisites to get going which I'm having troubles working out for Windows. I can find plenty of examples of setting it up under Linux but only one reference to a PowerShell example here, but it doesn't explain how to install cli53 in the first place. The other option I'm exploring is to use the BIND to Amazon Route 53 Conversion Tool perl script to first convert the zone files to the Route53 CreateHostedZoneRequest XML format and then use the AWS New-R53HostedZone PowerShell cmdlet to import the zones. After the zones have been imported I'll be looking at running a script to validate what has been created in Route53 matches with the existing nameserver prior to updating each domains nameserver records - I was planning on whipping something up using the new PS4.0 Resolve-DnsName cmdlet, but let me know if you have any better suggestions. Any assistance would be greatly appreciated - thanks. (By the way, I had more reference links in my post but ServerFault won't allow me to post more than 2 links being a new member; and for this same reason I also can't comment on Vasili's example in the other linked thread)

  Read the article

• syspolicy_purge_history generates failed logins

  - by jbrown414

  I have a development server with 3 instances: Default, A and B. It is a physical server, non clustered. Whenever the syspolicy_purge_history job runs at 2 am, I get failed login alerts. Looking at the job steps, all are successfully completed. It appears that some point during the step "Erase Phantom System Health Records" is when the failed logins occur. syspolicy_purge_history on instance B works OK. syspolicy_purge_history on the Default instance seems to want to connect to instance B, resulting in: Error: 18456, Severity: 14, State: 11. Login failed for user 'Machinename\sqlsvc-B'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>] . No errors are reported by Powershell. syspolicy_purge_history on the A instance seems to want to connect to the Default instance resulting in Error: 18456, Severity: 14, State: 11. Login failed for user 'Machinename\sqlsvc-Default'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>] . Then it tries to connect to the B instance, resulting in Error: 18456, Severity: 14, State: 11. Login failed for user 'Machinename\sqlsvc-B'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>] . No errors are reported by Powershell. I tried the steps posted here hoping they would fix it. http://support.microsoft.com/kb/955726 But again, this is not a virtual server nor is it in a cluster. Do you have any suggestions? Thanks.

  Read the article

• map subdomain to another subdomain via cname

  - by Stephen

  Question: I need to get DNS configured to point a subdomain from one domain (which I will generally not be controlling) to another subdomain on a different domain name. Testing this process using a simple CNAME entry keeps pointing to the primary domain and not the subdomain where it should be going. This is the scenario; (newdomain.com is in my control) cdn.xyz.com should display content from this subdomain subdomain.newdomain.com It is instead displaying content from newdomain.com (not the subdomain sub domain) cdn.xyz.com/page.htm displays content from newdomain.com/page.htm although what I need is it to display content from subdomain.newdomain.com/page.htm Other Background: setup is between two different servers with different IP ranges although DNS cluster is on between all servers the newdomain.com is set up with its own unique IP (which is on the A records for the subdomains, the subdomains work as expected/normal) the DNS entry is correct (cdn CNAME subdomain.newdomain.com.) ie the end period is included a DNS lookup on the CNAME externally reports back as subdomain.newdomain.com. as the record Does anyone know what DNS entries I am missing to get this working correctly ? Note: I do not want to just put a redirect between domains as I need the content of subdomain.newdomain.com/content.html to be visible via the URL of cdn.xyz.com/content.html also I can just use some redirects on newdomain.com to achieve what I am after but would prefer to just get the DNS correct. EDIT Current DNS cdn CNAME subdomain.newdomain.com. || CNAME entry for domain1 subdomain A XXX.XXX.XXX.XXX || A record entry for working subdomain pointing to unique IP What should happen is that cdn.domain1.com - subdomain.newdomain.com What is happening is cdn.domain1.com - newdomain.com (ie. the root not the subdomain) EDIT 2 Actually if its easier I am trying to emulate a simple cloud setup like Rackspace Containers (which I assume is similar to Buckets on AWS). although it is not for cloud storage Where a container has a url reference of hd62321678d323.rackspace.com (in truth they are much longer) so I can use a CNAME record of: cdn CNAME hd62321678d323.rackspace.com. so that http://cdn.mydomain.com/myfile.jpg displays content from http://hd62321678d323.rackspace.com/myfile.jpg

  Read the article

• Office365 SPF record has too many lookups

  - by Sammitch

  For some utterly ridiculous administrative reasons we've got a split domain with one mailbox on Office365 which requires us to add include:outlook.com to our SPF record. The problem with this is that that rule alone requires nine DNS lookups of the maximum of 10. Seriously, it's horrible. Just look at it: v=spf1 include:spf-a.outlook.com include:spf-b.outlook.com ip4:157.55.9.128/25 include:spfa.bigfish.com include:spfb.bigfish.com include:spfc.bigfish.com include:spf-a.hotmail.com include:_spf-ssg-b.microsoft.com include:_spf-ssg-c.microsoft.com ~all Given that we have our own large-ish mail system we need to have rules for a, mx, include:_spf1.mydomain.com, and include:_spf2.mydomain.com which puts us at 13 DNS lookups which causes PERMERRORs with strict SPF validators, and completely unreliable/unpredictable validation with non-strict/badly implemented validators. Is it possible to somehow eliminate 3 of those include: rules from the bloated outlook.com record, but still cover the servers used by O365? Edit: Commentors have mentioned that we should simply use the shorter spf.protection.outlook.com record. While that is news to me, and it is shorter, it's only one record shorter: spf.protection.outlook.com include:spf-a.outlook.com include:spf-b.outlook.com include:spf-c.outlook.com include:spf.messaging.microsoft.com include:spfa.frontbridge.com include:spfb.frontbridge.com include:spfc.frontbridge.com Edit² I suppose we can technically pare this down to: v=spf1 a mx include:_spf1.mydomain.com include:_spf2.mydomain.com include:spf-a.outlook.com include:spf-b.outlook.com include:spf-c.outlook.com include:spfa.frontbridge.com include:spfb.frontbridge.com include:spfc.frontbridge.com ~all but the potential issues I see with this are: We need to keep abreast of any changes to the parent spf.protection.outlook.com and spf.messaging.microsoft.com records. If anything is changed or [god forbid] added we would have to manually update ours to reflect that. With our actual domain name the record's length is 260 chars, which would require 2 strings for the TXT record, and I honestly don't trust that all of the DNS clients and SPF resolvers out there will properly accept a TXT record longer than 255 bytes.

  Read the article

• Creating a DNS Server

  - by c.adhityaa

  OK, I am a complete newbie to all this, so please bear with me. I want to create a DNS Server (like Google does - 8.8.8.8). I understand that a DNS Server is a Server that gives a IP on being given a hostname, ie. when I ask it what is the IP of google.com, it says "64.233.160.0". So, what I want to do is create a similar one that holds records of what translates to what. I thought of this since it looks to be similar to a webserver - ask for a page and it gives back the page. That is, when my machine has the IP xxx.xxx.xxx.xxx and people chose xxx.xxx.xxx.xxx as their Primary DNS Server, then when they ask "www.google.com", I sould be able to tell "64.233.160.0". So, how do I create this DNS Server that is accessible to everyone in the world ? It would be easier if we have something like EasyPHP which is the analogue to a webserver here. I am sorry if I have caused any trauma because this might seem rubbish to experts ;) Adhityaa

  Read the article

• Performance analytics via DBMS "plugins", or other solution

  - by Polynomial

  I'm working on a systems monitoring product that currently focuses on performance at the system level. We're expanding out to monitoring database systems. Right now we can fetch simple performance information from a selection of DBMS, like connection count, disk IO rates, lock wait times, etc. However, we'd really like a way to measure the execution time of every query going into a DBMS, without requiring the client to implement monitoring in their application code. Some potential solutions might be: Some sort of proxy that sits between client and server. SSL might be an issue here, plus it requires us to reverse engineer and implement the network protocol for each DBMS. Plugin for each DBMS system that automatically records performance information when a query comes in. Other problems include "anonymising" the SQL, i.e. taking something like SELECT * FROM products WHERE price > 20 AND name LIKE "%disk%" and producing SELECT * FROM products WHERE price > ? AND name LIKE "%?%", though this shouldn't be too difficult with some clever parsing and regex. We're mainly focusing on: MySQL MSSQL Oracle Redis mongodb memcached Are there any plugin-style mechanisms we can utilise for any of these? Or is there a simpler solution?

  Read the article

• Dynamic DNS updates for Linux and Mac OS X machines with a Windows DNS server

  - by DanielGibbs

  My network has a Windows machine running Server 2008 R2 which provides DHCP and DNS. I'm not particularly familiar with Windows domains, but the domain is set to home.local and that is the DNS domain name provided with DHCP leases. Everything works fine for Windows machines, they get the lease and update the server with their hostname and the server creates a DNS records for windowshostname.home.local. I am having problems obtaining the same functionality on Linux (Debian) and Mac OS X (Mountain Lion) machines. They receive DHCP just fine, but DNS entries are not being created on the server for them. On the Mac OS X machine, hostname gives an output of machostname.local, and on the Linux machine hostname --fqdn also gives an output of linuxhostname.local. I'm assuming that the server is not creating DNS entries because the domain does not match that of the server (home.local). I don't want to statically configure these machines to be part of the home.local domain, I just want them to pick it up from DHCP and be able to have entries in the DNS server. How should I go about doing this?

  Read the article

• Disable local delivery in Sendmail

  - by Luke P M

  I am using Sendmail on a Centos server to send email for PHP scripts, but the problem is that mail is delivered to a local mailbox on the machine rather than what is specified in the MX records for the domain - which actually point to another machine I use for email. I would like sendmail to not try and locally deliver mail for the domain the machine is setup for, is there a simple way to disable local delivery? The domain is not in the local-host-names file. I've already done lots of googling and I have looked at: http://serverfault.com/questions/26934/sendmail-configuration-to-not-deliver-mail-to-local-machine http://serverfault.com/questions/65365/disable-local-delivery-in-sendmail But either there is no answer or it is not suitable. I don't want to relay to another server, i just want it to send mail regardless of domain. To provide an example: I have two servers, one is the mail server at mail.example.com and a web server which is example.com, when I use the smtp service on the web server it currently routes mail to a local mailbox on example.com, but it should be going to mailboxes on mail.example.com Output of sendmail -bt returns: ADDRESS TEST MODE (ruleset 3 NOT automatically invoked) Enter 3,0 [email protected] canonify input: info @ example . com Canonify2 input: info Canonify2 returns: info canonify returns: info parse input: info Parse0 input: info Parse0 returns: info ParseLocal input: info ParseLocal returns: info Parse1 input: info Parse1 returns: $# local $: info parse returns: $# local $: info

  Read the article

• Why can't I delete my depot on Perforce?

  - by teukkam

  I'm just messing around in a local Perforce database, trying to figure out how I can reset Perforce back to a previous state without journaling or deleting and recreating the database files. I have some depots without files, one of them is called "sandbox". I created it with the p4 depot command either from the command line or using the P4Python API (at this point I don't remember which). When I type: p4 depot -d sandbox I get this: Depot sandbox isn't empty. To delete a depot, all file revisions must be removed and all lazy copy references from other depots must be severed. Use 'p4 obliterate' or 'p4 snap' to break file linkages from other depots, then clear this depot with 'p4 obliterate', then retry the deletion. I tried p4 obliterate -y sandbox which just says No records to delete. which is expectable as the depot is empty. Anyway it doesn't change the result from p4 depot -d. There are also no connections from other depots as the error message suggests. Any idea what is happening and is there a foolproof way to force a depot to be deleted without deleting the server files altogether? Ultimately I want to do this automatically from P4Python.

  Read the article

• Can a CNAME be a hostname

  - by pulegium

  This is bit of a theological question, but nonetheless... So, a server has a hostname, let's say the fqdn is hostname.example.com (to be really precise about what I mean, this is the name that is set in /etc/sysconfig/network). The very same server has multiple interfaces on different subnets. Let's say the IPs are 10.0.0.1 and 10.0.1.1. Now the question is, is it theoretically (mind you, this is important, I know that practically it works, but I'm interested in purely academic answer) allowed to have the following setup: interface1.example.com. IN A 10.0.0.1 interface2.example.com. IN A 10.0.1.1 hostname.example.com. IN CNAME interface1.example.com. OR should it rather be: hostname.example.com. IN A 10.0.0.1 interface2.example.com. IN A 10.0.1.1 interface1.example.com. IN CNAME hostname.example.com. I guess it's obvious which one is making more sense from the management/administration POV, but is it technically correct? The argument against the first setup is that a reverse lookup to 10.0.0.1 returns interface1.example.com and not what one might expect (ie the hostname: hostname.example.com), so the forward request and then sub sequential reverse lookups would return different results. Now, as I said, I want a theoretical answer. Links to RFC sections etc, that explicitly allows or disallows use of CNAME name as a hostname. If there's none, that's fine too, I just need to confirm. I failed to find any explicit statements so far, bar this book, where this situation is given as an example and implies that it can be done as one of the ways to avoid MX records pointing to a CNAME.

  Read the article

• Zabbix Proxy not collecting data

  - by Jordan Eunson

  I have a working Zabbix 1.8.2 server collecting data for our office and our colo facility. However the link between the colo and office is flaky. What I'm trying to do is setup a proxy on the colo side to have a 1 hour cache and relay the data to our primary server at the office. Our zabbix server is compiled from source and uses a mysql database I've followed the instructions found in the zabbix documentation to compile the proxy using a sqlite3 database. I add the proxy to zabbix under Administration-DM-Proxies. The zabbix server "sees" the proxy because the "last seen" field is always under 60s. However when I assign a colo host to the proxy I stop receiving data from it. The colo host's zabbix_agentd.log file says this: 29343:20100622:124847 Timeout while answering request 29343:20100622:124847 Getting list of active checks failed. Will retry after 60 seconds The zabbix_proxy.log says this. 2041:20100622:123131.760 Deleted 0 records from history [0.000994 seconds] 2028:20100622:124131.671 Error while receiving answer from server [ZBX_TCP_READ() failed I also am unable to receive any SNMP data which is more important to me than the zabbix agent data. Has anyone had this problem before? Zabbix Server OS: CentOS5.4 Zabbix Server Build: 1.8.2 from source Zabbix Proxy OS: CentOS5.4 Zabbix Proxy Build: 1.8.2 from source P.S. The SQLite database on the zabbix proxy never gets any data written to it, it is identical to when I created it from the blank schema in zabbix-1.8.2/create/schema. (Yes I've checked the permissions)

  Read the article

• SPF hardfail and DKIM failure when recipient has e-mail forwarding

  - by Beaming Mel-Bin

  I configured hardfail SPF for my domain and DKIM message signing on my SMTP server. Since this is the only SMTP server that should be used for outgoing mail from my domain, I didn't foresee any complications. However, consider the following situation: I sent an e-mail message via my SMTP server to my colleague's university e-mail. The problem is that my colleague forwards his university e-mail to his GMail account. These are the headers of the message after it reaches his GMail mailbox: Received-SPF: fail (google.com: domain of [email protected] does not designate 192.168.128.100 as permitted sender) client-ip=192.168.128.100; Authentication-Results: mx.google.com; spf=hardfail (google.com: domain of [email protected] does not designate 192.168.128.100 as permitted sender) [email protected]; dkim=hardfail (test mode) [email protected] (Headers have been sanitized to protect the domains and IP addresses of the non-Google parties) GMail checks the last SMTP server in the delivery chain against my SPF and DKIM records (rightfully so). Since the last STMP server in the delivery chain was the university's server and not my server, the check results in an SPF hardfail and DKIM failure. Fortunately, GMail did not mark the message as spam but I'm concerned that this might cause a problem in the future. Is my implementation of SPF hardfail perhaps too strict? Any other recommendations or potential issues that I should be aware of? Or maybe there is a more ideal configuration for the university's e-mail forwarding procedure? I know that the forwarding server could possibly change the envelope sender but I see that getting messy.

  Read the article

• ASP.Net application can no longer write to DB after having run out of disk space

  - by remi.despres-smyth

  I'm a software developer troubleshooting a sticky problem on a client's production server, and I've got a bit of a problem. They have a virtual server running Windows Server 2008, SQL Server 2008 R1 and IIS7. It was provisioned with two partitions: one that has the OS (~15 Gig), and the other has IIS' web sites (another ~15 Gig). My application that's running this server has been running perfectly well, up until about an hour ago, when it started throwing System.IO.IOException: "There is not enough space on disk". As soon as my client notified me, I cleared up some space on C:\, emptied the recycle bin, and restarted SQL Server and IIS. The web server came back up and the application was running, but it no longer saves information to the database. No error message is coming up, the application can get information out of the DB, but it can no longer save data back to it. I rebooted the server, to no effect. I spoke with a sys admin at the hosting company, and he says SQL Server appears to have come up fine and the database is not in read-only mode. I confirmed that, as I can add records to tables from SQL Server Management Studio. I looked at the event log immediately after trying to save an edited record in the app, and no new events appear in there that I can tell. I'm assuming this is related to having run out of space, as it was all working fine prior to that, but I'm at a bit of a loss as to what exactly needs a kick in the pants to get going again. Can anyone help me out? What the heck is going on here?

  Read the article

• How to configure Apache and Tomcat with vhosts?

  - by Umar Farooq Khawaja

  I have a server with a static, public IP address. I also have a registered domain name. For the sake of illustration, let's suppose they are IP Address: 12.34.56.78 Domain Name: example.com I have a single machine on which I am running the following: A website (over IIS7) available locally at localhost:80 A JetBrains TeamCity instance (over Tomcat) available locally at localhost:1234 A VisualSVN Server instance (over Apache) available locally at localhost:5678/svn I have set up an A record for example.com and the following CNAME records: www.example.com builds.example.com sources.example.com I would like to configure Tomcat and Apache such that: if I point my browser at builds.example.com, I end up at the JetBrains TeamCity instance and, if I point my browser at sources.example.com, I end up at the VisualSVN Server instance. I thought I could configure the Apache to vhost example.com:5678/svn to point to sources.example.com and added the following lines to the Apache httpd.conf file Listen 5678 NameVirtualHost *:5678 <VistualHost *:5678> ServerName sources.example.com DocumentRoot /svn </virtualHost> That broke the VisualSVN instance, so I had to revert that to Listen 5678 Help!

  Read the article

• Error installing pkgconfig via macports

  - by Greg K

  I installed Macports 1.8.2 from a DMG. That seemed to install fine. I ran sudo port selfupdate to make sure my ports tree was current. I then tried to install bindfs as I want to mount some directories in my OS X file system (like you can do with mount --bind in linux). pkgconfig and macfuse are two dependencies of bindfs. I had trouble installing bindfs due to errors installing pkgconfig, so I tried to just install pkgconfig, here's the debug output from sudo port install pkgconfig: $ sudo port -d install pkgconfig DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant i386 is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. ---> Computing dependencies for pkgconfig DEBUG: Executing org.macports.main (pkgconfig) DEBUG: Skipping completed org.macports.fetch (pkgconfig) DEBUG: Skipping completed org.macports.checksum (pkgconfig) DEBUG: Skipping completed org.macports.extract (pkgconfig) DEBUG: Skipping completed org.macports.patch (pkgconfig) ---> Configuring pkgconfig DEBUG: Using compiler 'Mac OS X gcc 4.2' DEBUG: Executing org.macports.configure (pkgconfig) DEBUG: Environment: CFLAGS='-O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' CC='/usr/bin/gcc-4.2' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig' checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... no checking whether to enable maintainer-specific portions of Makefiles... no checking build system type... i386-apple-darwin10.3.0 checking host system type... i386-apple-darwin10.3.0 checking for style of include used by make... none checking for gcc... /usr/bin/gcc-4.2 checking for C compiler default output file name... configure: error: C compiler cannot create executables See `config.log' for more details. Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig " returned error 77 DEBUG: Backtrace: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig " returned error 77 while executing "$procedure $targetname" Warning: the following items did not execute (for pkgconfig): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. I have only recently installed Xcode 3.2.2 (prior to installing macports). Am I right in thinking this the issue here: configure: error: C compiler cannot create executables

  Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >