Search Results

Search found 1103 results on 45 pages for 'corporation'.

Page 19/45 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • Wireless Problem on Acer Aspire 5610z

    - by Ugur Can Yalaki
    I installed ubuntu 12.04 on my machine, but I can't get wireless connection to work. My computer is Acer Aspire 5610z. I found that some other people that have same computer, face the same problem. Here is some information about it: ****** info trace ****** * uname -a * Linux ucy-Aspire-5610Z 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux * lsb_release * Distributor ID: Ubuntu Description: Ubuntu 12.04.3 LTS Release: 12.04 Codename: precise * lspci * 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) Subsystem: AMBIT Microsystem Corp. Device [1468:0422] Kernel driver in use: b43-pci-bridge 06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0090] Kernel driver in use: b44 * lsusb * Bus 001 Device 004: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub * PCMCIA Card Info * PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 * iwconfig * * rfkill * 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no * lsmod * ssb_hcd 12781 0 ssb 51554 2 ssb_hcd,b44 * nm-tool * NetworkManager Tool State: connected (global) Device: usb0 [Wired connection 2] ------------------------------------------- Type: Wired Driver: rndis_host State: connected Default: yes HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: on IPv4 Settings: Address: 192.168.42.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.42.129 DNS: 192.168.42.129 IPv6 Settings: Address: ::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 Address: fe80::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 DNS: fe80::504d:76ff:fe86:db04 Device: eth2 ----------------------------------------------------------------- Type: Wired Driver: b44 State: unavailable Default: no HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: off * NetworkManager.state * [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true * NetworkManager.conf * [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false * interfaces * auto lo iface lo inet loopback * iwlist * * resolv.conf * nameserver 127.0.0.1 * blacklist * [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist-bcm43.conf] blacklist b43 blacklist b43legacy blacklist ssb blacklist bcm43xx blacklist brcm80211 blacklist brcmfmac blacklist brcmsmac blacklist bcma [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac * modinfo * filename: /lib/modules/3.8.0-32-generic/kernel/drivers/usb/host/ssb-hcd.ko license: GPL description: Common USB driver for SSB Bus author: Hauke Mehrtens srcversion: E127A51EDC8F44D2C2A8F15 alias: ssb:v4243id0819rev* alias: ssb:v4243id0817rev* alias: ssb:v4243id0808rev* depends: ssb intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 filename: /lib/modules/3.8.0-32-generic/kernel/drivers/ssb/ssb.ko license: GPL description: Sonics Silicon Backplane driver srcversion: 14621F6EC014F731244437C alias: pci:v000014E4d00004350sv*sd*bc*sc*i* alias: pci:v000014E4d0000432Csv*sd*bc*sc*i* alias: pci:v000014E4d0000432Bsv*sd*bc*sc*i* alias: pci:v000014E4d00004329sv*sd*bc*sc*i* alias: pci:v000014E4d00004328sv*sd*bc*sc*i* alias: pci:v000014E4d00004325sv*sd*bc*sc*i* alias: pci:v000014E4d00004324sv*sd*bc*sc*i* alias: pci:v000014E4d0000A8D6sv*sd*bc*sc*i* alias: pci:v000014E4d00004322sv*sd*bc*sc*i* alias: pci:v000014E4d00004321sv*sd*bc*sc*i* alias: pci:v000014E4d00004320sv*sd*bc*sc*i* alias: pci:v000014E4d00004319sv*sd*bc*sc*i* alias: pci:v000014A4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004315sv*sd*bc*sc*i* alias: pci:v000014E4d00004312sv*sd*bc*sc*i* alias: pci:v000014E4d00004311sv*sd*bc*sc*i* alias: pci:v000014E4d00004307sv*sd*bc*sc*i* alias: pci:v000014E4d00004306sv*sd*bc*sc*i* alias: pci:v000014E4d00004301sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 * udev rules * PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb1:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb2:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb3:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" * dmesg * [ 2.385241] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 2.385256] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 2.385266] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 2.385276] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 2.385286] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 2.448147] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 2.468112] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00 [ 2.468124] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 2.468132] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 2.468140] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 2.508230] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 2.528620] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver ******** done ******** Thank you already for your help.

    Read the article

  • Wifi hotspot to connect to Android using non-AP supported cards

    - by 3l4ng
    I'm running Ubuntu 13.10 64b on a Dell Inspiron N5010. My wireless device (found using lspci) is Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01). I bought a new android phone and want to connect to Internet by using the laptop as a Wireless Access Point (ad-hoc doesn't work with Android). I tried following tutorials like the one at How to setup a wi-fi hotspot (access point mode)?. The relevant output from iw list was Supported interface modes: * IBSS * managed Running sudo hostapd /path/to/conf/file gave me (eth1 is the wireless, verified by iwconfig) Failed to create interface mon.eth1: -95 (Operation not supported) Could not set channel for kernel driver eth1: Unable to setup interface. Could not connect to kernel driver. I am able to use Connectify and Virtualrouter on Windows, and the phone works great. How do I get an access point running on Ubuntu? I'm open to other alternatives as well.

    Read the article

  • Oracle at Logicon 2010

    - by [email protected]
    Oracle will be a premiere sponsor of this year's Logicon event, May 4th and 5th in Atlanta. Attendees of the event will hear a keynote address from Oracle's Vice President of Supply Chain, Maha Muzumdar, as he, along with Eaton Corporation's Vice President of IT, John Gercak, explore what market trends are causing the most significant impact on today's businesses and what organizations are doing to address and take advantage of those trends.   In addition, Oracle is sponsoring a customer and prospect dinner at the Atlanta Grill, rated by Zagat as Atlanta's #1 downtown and southern cuisine restaurant.   Additional event details can be found on WBR's website;http://www.wbresearch.com/logiconusa/

    Read the article

  • ubuntu 12.04.3 - Reverse DNS issue - slow ping interval but normal ping value

    - by McArthor Lee
    i'm running ubuntu 12.04.3 x86 desktop in my corporation environment. I join the corp domain by Likewise open. But when I ping another pc, say hostname is pc-test, "ping pc-test" or "ping pc-test.domain.name" returns slow interval (about 5 seconds) but the ping value is below 1 ms. When I use "ping -n pc-test", everything works well. So I conclude this is about reverse DNS issue. how to fix this issue? many thanks! Edit: In my understanding, reverse DNS issue is related to DNS server or Wins server, not only an ubuntu issue, is this right? if I wanna fix this issue as much as possible on ubuntu but not on network servers, what to do?

    Read the article

  • Ubuntu 14.04 ATI/Intel Hybrid Graphics DPM

    - by anchit123
    I have a Dell Inspiron 3521 with hybrid ATI/Intel graphics. (AMD Radeon 7670M / Intel HD 4000) using Ubuntu 14.04 with open source drivers for graphics. (xserver-xorg-video-ati) I read that Ubuntu 14.04 with the linux kernel version 3.13 supports auto switching between graphics and dynamic power management. Is it correct? Anyway, if it is true, I dont think that it is working in my system , because fan runs constantly and battery backup is less than 2 hours. lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (rev ff) What should I do? Is there any hope that this gets fixed in future kernels?

    Read the article

  • Wireless card disappeards when restart ubuntu

    - by Kristian Jones
    I used 'additional drivers' to install 'Broadcom STA wireless driver' and it returns an error. WIthin jockey.log it says the following numerous times. 2011-02-14 21:24:06,945 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted After it returns the error the network card will work temporarily until I restart the laptop. When I restart I got to go through the procedure again of trying to activate the driver, returns an error however it works temporarily. The network card is as follows on a Dell Inspiron 1545: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] Rev 01 I have been trying to solve this myself for many hours. Any help is appreciated/

    Read the article

  • Nvidia G96 [GeForce 9400 GT] and application graphic issues

    - by Fabio
    I've got a quite old NVIDIA graphic card and I with installed restricted drivers from Settings panel (as also shown in this thread). ? ~ lspci 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9400 GT] (rev a1) I tried a lot of them: version 173-update, current, beta, but the only one that can run unity-2d it's current-update. That's Ubuntu 12.04.1 LTS 64bit. However... Unity crashes, sometimes windows border disappear, Java Virtual Machine doesn't works, font rendering it's slow and so on. How can I solve this? Some suggestions? Thanks!

    Read the article

  • Why doesn't the Visual Studio C compiler like this? [migrated]

    - by justin
    The following code compiles fine on Linux using gcc -std=c99 but gets the following errors on the Visual Studio 2010 C compiler: Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 16.00.40219.01 for 80x86 Copyright (C) Microsoft Corporation. All rights reserved. fib.c fib.c(42) : error C2057: expected constant expression fib.c(42) : error C2466: cannot allocate an array of constant size 0 fib.c(42) : error C2133: 'num' : unknown size The user inputs the amount of Fibonacci numbers to generate. I'm curious as to why the Microsoft compiler doesn't like this code. http://pastebin.com/z0uEa2zw

    Read the article

  • Intel graphics Ubuntu 12.04.3 LTS: does not detect second monitor

    - by user206551
    I have some problems to get the second monitor working on my Ubuntu 12.04.3 LTS. If I click on the detect button it does not work. Info about my system: $uname -a Linux LabTop2 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux $cat /etc/*-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.3 LTS" NAME="Ubuntu" VERSION="12.04.3 LTS, Precise Pangolin" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu precise (12.04.3 LTS)" VERSION_ID="12.04" $lspci |grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) $lsmod | grep video uvcvideo 72250 0 videobuf2_core 39385 1 uvcvideo videodev 96131 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12920 1 uvcvideo videobuf2_memops 13042 1 videobuf2_vmalloc video 19116 1 i915 $xrandr -q xrandr: Failed to get size of gamma for output default Screen 0: minimum 1366 x 768, current 1368 x 768, maximum 1368 x 768 default connected 1368x768+0+0 0mm x 0mm 1366x768 0.0 1368x768 0.0* Before upgrading the system, xrand -q showed my much more resolution options and the other monitor. I have tried to install intel-linux-graphics-installer but this version of ubuntu is not supported Any help will be apreciated!!

    Read the article

  • Problems with NVIDIA drivers: White screen with full(or almost full)screen apps

    - by Felipe
    My NVIDIA graphic card is a 7050/610i. My problem is that after upgrading to the last NVIDIA drivers when I use fullscreen apps (or almost fullscreen) the windows goes white. My xorg.conf file: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 270.29 ([email protected]) Wed Feb 23 16:38:34 PST 2011 Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" Option "AddARGBGLXVisuals" "True" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Module" Load "glx" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" # generated from default EndSection Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Device" Identifier "Device0" VendorName "NVIDIA Corporation" Driver "nvidia" Option "NoLogo" "True" EndSection Any idea on how to solve this? <--Sorry for bad english, ask for more info--

    Read the article

  • Coolbits not working

    - by usk
    I want to use coolbits to increase fan speed of my Fermi GPU. 280.13 driver installed. Ubuntu 11.10 I edited /etc/X11/xorg.conf as follows, by pressing Alt+F2 and gksu gedit /etc/X11/xorg.conf I get Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 470" Option "NoLogo" "True" Option "Coolbits" "4" EndSection Started getting these messages, Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap" So I did this, sudo aptitude install gtk2-engines-pixbuf terminal, a@z:~$ nvidia-settings -a [gpu:0]/GPUFanControlState=1 a@z:~$ nvidia-settings -q fans 1 Fan on z:0 [0] z:0[fan:0] (Fan 0) a@z:~$ nvidia-settings -a [fan:0]/GPUCurrentFanSpeed=80 ERROR: Error assigning value 80 to attribute 'GPUCurrentFanSpeed' (z:0[fan:0]) as specified in assignment '[fan:0]/GPUCurrentFanSpeed=80' (Unknown Error). So, it's not working; I can't enter the fan speed percentage. Also from NVidia X Server, there are no fan controls. http://en.gentoo-wiki.com/wiki/Nvidia#Manual_Fan_Control_for_nVIDIA_Settings

    Read the article

  • The August '14 Oracle Linux Newsletter is Now Available

    - by Chris Kawalek
    The August 2014 edition of the Oracle Linux Newsletter is now available! Chock full of fantastic information, it's your one-stop-shop for catching up on all things Oracle Linux. In this edition: Oracle Linux 7 Now Available Oracle Linux and Oracle Virtualization at Oracle OpenWorld 2014 Technology Preview of OpenStack Icehouse with Oracle Linux and Oracle VM Now Available Using Ksplice as a Diagnostic Tool with Oracle Support Hands-on Lab: How to Migrate from VMware and Red Hat to Oracle Linux and Oracle VM Emirates Nuclear Energy Corporation Boosts Performance—Is Set to Cut Technology Ownership Costs by US$500,000 in Five Years And much more! You can read the latest edition online right now or sign up to get it automatically delivered to your inbox. 

    Read the article

  • Atheros AR8132 Ethernet refuses to connect after suspend

    - by Ramesh Patel
    I'm having an issue where my ethernet card (Atheros Communications Inc. AR8132 Fast Ethernet (rev c0)) refuses to recognize when a network cable is plugged in after a suspend. This is dmesg after suspending: [135897.712049] atl1c 0000:02:00.0: MAC state machine can't be idle since disabled for 10ms second [135897.743729] ADDRCONF(NETDEV_UP): eth0: link is not ready [135898.541804] ADDRCONF(NETDEV_UP): eth1: link is not ready [135900.452077] atl1c 0000:02:00.0: irq 47 for MSI/MSI-X [135900.672262] atl1c 0000:02:00.0: Error get phy ID [135900.673060] ADDRCONF(NETDEV_UP): eth0: link is not ready [135900.674140] ADDRCONF(NETDEV_UP): eth0: link is not ready [135925.604052] [135935.776051] eth1: no IPv6 routers present eth0 is the ethernet card and eth1 is the wlan card (Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)). The ethernet card uses the atl1c driver and the wlan card uses the wl driver. Sorry, should have mentioned as well, running Ubuntu 12.04 with kernel 3.2.0-25-generic.

    Read the article

  • How Can I Get My USB TV Tuner To Work

    - by Foxface
    I have a KWorld UB445-U ATSC Hybrid TV Stick. I've tried MythTV, but it kept crashing when I was trying to set it up, and didn't get anywhere with it. I've tried VLC and just tried Kaffiene. I'm not sure how to work VLC or Kaffeine to accept my TV. Can someone help me with it? EDIT: Code: foxface@Toshiba-Satellite-L775:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b289 Chicony Electronics Co., Ltd Bus 002 Device 006: ID 1b80:e421 Afatech Bus 003 Device 002: ID 13fd:1e40 Initio Corporation

    Read the article

  • How to elevate engineering culture at large corporations?

    - by davidk01
    One thing I have realized working at a large corporation is that it doesn't matter how smart you are because if everyone else doesn't see the value in what you are doing then you are not going to get very far. It's much harder to convince 1000 people that a certain part of the software stack should be in groovy than it is to convince 10 people of the same thing. I'm curious how people go about elevating the engineering culture at large corporations because I've been running into walls left and right and I would like to be more proactive about how I go about it. I have been advocating tech talks and tech demos along with code reviews as potential solutions. Do people have other suggestions? Note that 1000 people and groovy are just representative examples. I am not married to groovy or any other language and 1000 people is meant to indicate large scale and how to go about teaching a large group of people about best practices and engineering principles in general.

    Read the article

  • Slow DNS Resolution

    - by user4541
    After a clean install of 10.10 I'm finding DNS resolution takes quite a long time. Hitting any url takes a good few seconds (10 - 30) before the site is displayed. I'm thinking this is a DNS resolution issue due to the 'waiting' or 'looking up' text being displayed in Firefox and Chrome. I do not get this issue with Slackware Linux or Windows 7 so it is not network or DNS server specific issue. It's something on the client side. Looking around on Google I see there are a few other people with this issue. The ones that have reported a workaround by switching to openDNS are disabling IPV6 or dealing with another issue. Any help would be appreciated. My network card is wired: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express Thanks

    Read the article

  • Recorded YouTube-like presentation and "live" demos of Oracle Advanced Analytics

    - by chberger
    Ever want to just sit and watch a YouTube-like presentation and "live" demos of Oracle Advanced Analytics?  Then ' target=""click here! This 1+ hour long session focuses primarily on the Oracle Data Mining component of the Oracle Advanced Analytics Option and is tied to the Oracle SQL Developer Days virtual and onsite events.   I cover: Big Data + Big Data Analytics Competing on analytics & value proposition What is data mining? Typical use cases Oracle Data Mining high performance in-database SQL based data mining functions Exadata "smart scan" scoring Oracle Data Miner GUI (an Extension that ships with SQL Developer) Oracle Business Intelligence EE + Oracle Data Mining resutls/predictions in dashboards Applications "powered by Oracle Data Mining for factory installed predictive analytics methodologies Oracle R Enterprise Please contact [email protected] should you have any questions.  Hope you enjoy!  Charlie Berger, Sr. Director of Product Management, Oracle Data Mining & Advanced Analytics, Oracle Corporation

    Read the article

  • Could not apply stored configuration for monitors

    - by Hernantz
    Well this happened when I upgraded to Natty. Not only seems I can't change my resolution to higher than 1024x768 but it appears at the left and using only 70% of the monitor's width. I tried logging in but in ubuntu classic mode, and i was able to change it, but that trick did not work anymore. (May this be a compiz problem?) Anyways, here is my /var/log/Xorg.0.log http://pastebin.com/Ew4wwLab and lspci -nn | grep VGA: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) I tried using xrandr for adding manually a resolution of 1280x1768 but without luck. Here is the xrandr output Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0*+ 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) TV1 disconnected (normal left inverted right x axis y axis) 1280x1024 (0xc6) 109.0MHz h: width 1280 start 1368 end 1496 total 1712 skew 0 clock 63.7KHz v: height 1024 start 1027 end 1034 total 1063 clock 59.9Hz

    Read the article

  • FY13 LIVE Oracle PartnerNetwork Kickoff is June 26th/27th

    - by JuergenKress
    ORACLE CORPORATION - PROPRIETARY AND CONFIDENTIAL Oracle PartnerNetwork | Account | Feedback REGISTER NOW: FY13 LIVE Oracle PartnerNetwork Kickoff is June 26th/27th Join us for a live online event hosted by the Oracle PartnerNetwork team as we kickoff FY13. Hear messages from Judson Althoff, Oracle's SVP of Worldwide Alliances & Channels, as well as other Oracle executives, thought leaders, and partners. During Partner Kickoff you will see: Judson Althoff on FY12 recap and FY13 call to action Executive Addresses from Mark Hurd, Thomas Kurian, John Fowler, and Regional Sales Executives Embed, Sell and Implement the Full Portfolio Business Opportunities for ISV / OEM’s, System Integrators, and Channel Partners Q&A with Regional Alliances & Channels Executives Please register for your regions Partner Kickoff at the appropriate link below: Region Date / Time NAS Tuesday, June 26 @ 8:30 am PT EMEA Tuesday, June 26 @ 2:00 pm BST LAD Tuesday, June 26 @ 2:00pm EDT (Miami) / 3:00pm BRT (Sao Paulo) JAPAN Wednesday, June 27 @ 10:00 am JST APAC Wednesday, June 27 @ 8:30 am IST (Bangalore) / 11:00 am SGT (Singapore)Wednesday, June 27 @ 1:00 pm AEST (Sydney) Be sure to follow us around the web to get the latest on OPN! We look forward to seeing you online,The Oracle PartnerNetwork Team

    Read the article

  • FY13 LIVE Oracle PartnerNetwork Kickoff is June 26th/27th

    - by JuergenKress
    ORACLE CORPORATION - PROPRIETARY AND CONFIDENTIAL Oracle PartnerNetwork | Account | Feedback REGISTER NOW: FY13 LIVE Oracle PartnerNetwork Kickoff is June 26th/27th Join us for a live online event hosted by the Oracle PartnerNetwork team as we kickoff FY13. Hear messages from Judson Althoff, Oracle's SVP of Worldwide Alliances & Channels, as well as other Oracle executives, thought leaders, and partners. During Partner Kickoff you will see: Judson Althoff on FY12 recap and FY13 call to action Executive Addresses from Mark Hurd, Thomas Kurian, John Fowler, and Regional Sales Executives Embed, Sell and Implement the Full Portfolio Business Opportunities for ISV / OEM’s, System Integrators, and Channel Partners Q&A with Regional Alliances & Channels Executives Please register for your regions Partner Kickoff at the appropriate link below: Region Date / Time NAS Tuesday, June 26 @ 8:30 am PT EMEA Tuesday, June 26 @ 2:00 pm BST LAD Tuesday, June 26 @ 2:00pm EDT (Miami) / 3:00pm BRT (Sao Paulo) JAPAN Wednesday, June 27 @ 10:00 am JST APAC Wednesday, June 27 @ 8:30 am IST (Bangalore) / 11:00 am SGT (Singapore)Wednesday, June 27 @ 1:00 pm AEST (Sydney) Be sure to follow us around the web to get the latest on OPN! We look forward to seeing you online,The Oracle PartnerNetwork Team

    Read the article

  • OpenGL (glx) not working with ubuntu 12.10

    - by user26766
    It all started when I installed nvidia's own (download from website) driver. Uninstalling it and reverting back to nvidia-current didn't solve the problem, so I have been playing with this for a while. It seems glx support is missing, and my intel graphics is not responding. gnome loads only in fallback mode. Here are some outputs: glxinfo name of display: :0.0 Error: couldn't find RGB GLX visual or fbconfig glxgears Error: couldn't get an RGB, Double-buffered visual optirun glxgears works fine lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) Here's the content of log file when just after running glxinfo: less /var/log/Xorg.0.log | grep gl [ 112.156] (II) LoadModule: "glx" [ 112.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 112.157] (II) Module glx: vendor="X.Org Foundation" [ 112.157] (II) UnloadModule: "glx" [ 112.157] (II) Unloading glx [ 112.157] (EE) Failed to load module "glx" (module requirement mismatch, 0) Some more info... lsmod Module Size Used by bbswitch 13612 0 pci_stub 12623 1 vboxpci 23195 0 vboxnetadp 25671 0 vboxnetflt 23480 0 vboxdrv 320372 3 vboxpci,vboxnetadp,vboxnetflt parport_pc 32689 0 ppdev 17074 0 bnep 18141 2 rfcomm 46620 12 binfmt_misc 17501 1 snd_hda_codec_hdmi 32049 1 snd_hda_codec_realtek 78147 1 joydev 17458 0 uvcvideo 76750 0 videobuf2_core 32852 1 uvcvideo videodev 120310 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12861 1 uvcvideo videobuf2_memops 13405 1 videobuf2_vmalloc snd_hda_intel 33492 3 coretemp 13401 0 kvm_intel 132760 0 arc4 12530 2 snd_hda_codec 134213 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel kvm 414111 1 kvm_intel iwlwifi 386837 0 i915 520799 2 snd_hwdep 17699 1 snd_hda_codec snd_pcm 96668 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec psmouse 100389 0 drm_kms_helper 49113 1 i915 ghash_clmulni_intel 13221 0 snd_seq_midi 13325 0 snd_rawmidi 30513 1 snd_seq_midi btusb 22475 0 drm 288436 3 i915,drm_kms_helper serio_raw 13216 0 snd_seq_midi_event 14900 1 snd_seq_midi snd_seq 61555 2 snd_seq_midi,snd_seq_midi_event mac80211 535936 1 iwlwifi bluetooth 209249 22 bnep,rfcomm,btusb snd_timer 29426 2 snd_pcm,snd_seq snd_seq_device 14498 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78921 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 206797 2 iwlwifi,mac80211 aesni_intel 51038 1 cryptd 20404 2 ghash_clmulni_intel,aesni_intel aes_x86_64 17256 1 aesni_intel dell_wmi 12682 0 sparse_keymap 13891 1 dell_wmi dcdbas 14439 0 i2c_algo_bit 13414 1 i915 microcode 22804 0 lpc_ich 17062 0 soundcore 15048 1 snd snd_page_alloc 18485 2 snd_hda_intel,snd_pcm video 19391 1 i915 mac_hid 13206 0 wmi 19071 1 dell_wmi mei 40691 0 lp 17760 0 parport 46346 3 parport_pc,ppdev,lp ahci 25721 3 libahci 31192 1 ahci atl1c 41102 0 how can I fix this? any ideas? Here is another thing I've tried: sudo apt-get purge nvidia* sudo reboot sudo apt-get install bumblebee bumblebee-nvidia didn't make any difference. The most relevant post I found on the web was this: http://ubuntuforums.org/archive/index.php/t-1722306.html Here it's explained that the problem is with the priority of shared libraries that are loaded for glxinfo. Here's what I get when I look up the libraries: linux-vdso.so.1 => (0x00007fff6bf8b000) libGL.so.1 => /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1 (0x00007f22d6ccd000) libX11.so.6 => /usr/lib/x86_64-linux-gnu/libX11.so.6 (0x00007f22d6993000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f22d65d3000) libglapi.so.0 => /usr/lib/x86_64-linux-gnu/libglapi.so.0 (0x00007f22d63ad000) libXext.so.6 => /usr/lib/x86_64-linux-gnu/libXext.so.6 (0x00007f22d619b000) libXdamage.so.1 => /usr/lib/x86_64-linux-gnu/libXdamage.so.1 (0x00007f22d5f97000) libXfixes.so.3 => /usr/lib/x86_64-linux-gnu/libXfixes.so.3 (0x00007f22d5d91000) libX11-xcb.so.1 => /usr/lib/x86_64-linux-gnu/libX11-xcb.so.1 (0x00007f22d5b8f000) libxcb-glx.so.0 => /usr/lib/x86_64-linux-gnu/libxcb-glx.so.0 (0x00007f22d5977000) libxcb.so.1 => /usr/lib/x86_64-linux-gnu/libxcb.so.1 (0x00007f22d5759000) libXxf86vm.so.1 => /usr/lib/x86_64-linux-gnu/libXxf86vm.so.1 (0x00007f22d5553000) libdrm.so.2 => /usr/lib/x86_64-linux-gnu/libdrm.so.2 (0x00007f22d5346000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f22d5129000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f22d4f25000) /lib64/ld-linux-x86-64.so.2 (0x00007f22d6f54000) libXau.so.6 => /usr/lib/x86_64-linux-gnu/libXau.so.6 (0x00007f22d4d20000) libXdmcp.so.6 => /usr/lib/x86_64-linux-gnu/libXdmcp.so.6 (0x00007f22d4b1a000) librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f22d4911000) It seems "mesa" instead of nvidia-current is being used. However I didn't find any obvious link to /lib/nvidia-current in /etc/ld.so.conf (where the directories containing the shared libraries are listed). I don't know if there's anything missing or if this is normal. thanks, UPDATE: The problem was solved by updating to Ubuntu 13.04. It seems bumblebee was to blame, but I'm not sure what was going wrong...

    Read the article

  • Google I/O 2010 - Keynote Day 1

    Google I/O 2010 - Keynote Day 1 Google I/O 2010 - Keynote Day 1 Video footage from Day 1 keynote at Google I/O 2010 Vic Gundotra, Engineering Vice President, Google Sundar Pichai, Vice President, Product Management, Google Charles Pritchard, Founder, MugTug Jim Lanzone, CEO, Clicker Mike Shaver, VP Engineering, Mozilla Corporation Håkon Wium Lie, CTO, Opera Software Kevin Lynch, CTO, Adobe Systems Terry McDonell, Editor, Sports Illustrated Group Lars Rasmussen, Manager, Google Wave David Glazer, Engineering Director, Google Paul Maritz, President & CEO, VMware Ben Alex, Senior Staff Engineer, SpringSource Division of VMware, Bruce Johnson, Engineering Director, Google Kevin Gibbs, Software Engineer, Google For all I/O 2010 sessions, please go to code.google.com From: GoogleDevelopers Views: 2 1 ratings Time: 02:05:08 More in Science & Technology

    Read the article

  • Ubuntu 12.10 64bit fresh install, wireless issue!

    - by Dave
    Just installed a fresh Ubuntu 12.10 64bit on my laptop, run the update manager, restarted and suddenly I can't use my wifi anymore. Ubuntu software center installed automatically the wifi additional driver as you can see in my screenshot. If I mark the option "Do not use the device" and apply changes, restarting Ubuntu my wifi is back and I can use it. If I run iwconfig my terminal is showing this Now if I use Ubuntu for more than 20 minutes surfing the web my wifi it keeps to be connected but I don't receive any signal from it. Any page I try to open it simply don't open (just waiting icon). If I disconnect my wifi and connect it again, same issue, it doesn't work. The only way to make it work again is to restart Ubuntu. And the same story it happens again after aprox. 20, 30 minutes. WIFI device details: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Thanks, Dave

    Read the article

  • Great Programmer Productivity - Accounting for 10,000 fold difference?

    - by TheImpact
    "A great lathe operator commands several times the wage of an average lathe operator, but a great writer of software code is worth 10,000 times the price of an average software writer." - Bill Gates Say there's a "great" software engineer and an "average" software engineer on the same team. How can you account for one engineer being 10,000 times more productive? I can't quite fathom this, given they're both taking on their share of features, bugs and investigations, and consistently deliver with quality. Would my description possibly justify them to be above "average"? "great"? In a corporation like Microsoft, what % of software engineers are "average"? What % "great"?

    Read the article

  • Wi-fi interface fails to authenticate on secured networks

    - by Eduardo Bezerra
    the problem is that I can't connect to wireless networks that have security enabled. I can connect fine to the unsecured network of my university, but not to the secured one in the same building. Also, it fails to connect to my home wireless router, which uses wpa2 encryption. Any ideas? I have a Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01), with pci id [14e4:4353], running Ubuntu 12.10 on a macbook pro 6,2. I'm using bcmwl-kernel-source package with kernel module wl to enable my wi-fi device.

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >