Search Results

Search found 18126 results on 726 pages for 'bsi support'.

Page 191/726 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

  • Payables Master Generic Datafix (MGD) Now Checks For Even More EBTax Corruption!!

    - by MargaretW
    The Payables MGD is a vital diagnostic that all R12/12.1 customers need to run regularly to check the data integrity of their Payables system. This script does not make any changes to your system, so it’s risk free and it produces a HTML formatted output showing which data corruption issues have been detected and provides the Doc ID’s that will be needed to fix them. This MGD diagnostic (version 120.92 and above) is even better than it used to be as it now checks for 11 new EBTax corruption signatures that Support was seeing on a consistent basis. These lengthy Service Requests could have been avoided with one run of the MGD which tells you right away if you have data corruption. It’s the first thing our Payables support engineers will have you run when you log an SR so why not be one step ahead? The new EBTax signatures that were included in this latest update to the MGD are pulled from the following common solutions documents: R12 E-Business Tax/Payables Data-Fixes: Cause and action to handle ZX_LINES_SUMMARY_U1 issue Doc ID 1152123.1 EB-Tax Data Corruption Issues & Recommended Solutions Doc ID 1316316.1 The specific issues that are now screened are detailed below: 1. TAXABLE_BASIS_FORMULA and MANUALLY_ENTERED_FLAG mismatch 2. ESTABLISHMENT_ID mismatch 3. TRX_NUMBER mismatch 4. TAX_RATE mismatch 5. Currency Conversion related columns mismatch in Migrated Invoices 6. HISTORICAL_FLAG and RECORD_TYPE_CODE mismatch 7. ADJUSTED_DOC_TRX_LEVEL_TYPE is NULL or APPLIED_FROM_TRX_LEVEL_TYPE is NULL 8. Missing Reversal Tax Distributions For Tax Distributions 9. Tax Lines for discarded or cancelled Transaction Lines are not marked as cancelled 10. Error AP_ERR_TAX_DIST_SYNC 11. AP_UNFROZEN_DIST_EXIST/Unfrozen Tax Distributions exist for this invoice Get Proactive – Check your system for these common EBTax issues and fix the data before it causes a problem. Access the MGD note and watch the video that explains how it works here - R12: Master GDF Diagnostic to Validate Data Related to Invoices, Payments, Accounting, Suppliers and EBTax [VIDEO] Doc ID 1360390.1

    Read the article

  • Is WEP used in conjunction with a wireless access list adequate security?

    - by LeopardSkinPillBoxHat
    I use a Netgear wireless router, with various wireless devices connecting to it. One of my wireless devices doesn't support WPA2 security, so I had to downgrade the security on the router to WEP. We all know WEP is broken, so as an added measure I enabled a wireless access list on the router so that only devices with specified MAC addresses which are in my access list are permitted to connect to the router. I know it is possible to spoof a MAC address from a device for the purposes of accessing a secure network like this. But is it easy? Is using WEP and a wireless access list good enough to prevent most hacking attacks? Or should I do whatever I can to ensure all devices support WPA2 in the future?

    Read the article

  • How to change the terminal to SCO compliant in Ubuntu

    - by kaushik
    I have a server in which SCO 5.x is installed. I have several thin clients which were supplied from our head office. Those thin clients have linux pre-installed in them. When we tried to connect to our SCO server, we have found out that the thin client does not support SCO terminal type. So the program (Which is written in Oracle forms) is not working correctly. Lots of function keys stopped working and screen also not getting refreshed correctly. Hence we decided to use Ubuntu Live USB keys in thin clients. Now the problem is how can we change the terminal type to SCO in ubuntu ? Means I want it in the text terminal (Alt+Ctrl+F1,F2...) (Not in xterm...graphical terminal emulators). Does ubuntu support SCO terminal type ?

    Read the article

  • Alternatives to Citrix GoToAssist ?

    - by Evan Carroll
    Citrix GoToAssist is a really nifty little web application for customer support that allows you to take control of someones OSX, or Windows machine. Essentially, it works likes this: You log in to your management console You get a code You give them a code, and a website (fastsupport.com) They go there and enter in the code They accept the browser applet which installs a program on their computer You have control of their desktop You can see their desktop, configure applications, etc. They can also see when you disconnect. It is really rather nifty, but it doesn't support Linux and it is rather expensive (660$ a year). Does anyone know of any alternatives to this? I'm looking for a solution as simple on the user as this one, that doesn't require firewall configuration or setting up ssh/vnc/rdesktop etc.

    Read the article

  • Looking for a central image database and tagging system for a group of users

    - by jstarek
    I'm doing IT support for a small volunteer organisation who needs to centrally store and organize around 2500 photos. Can anyone here recommend a database or similar system which matches the following criteria: Intuitive to use for users with little computer experience Multi-user support, ideally with integration in our existing LDAP user directory Should have a web-interface Not a hosted solution like Picasa (because we have a rather slow internet connection with very slow upload) Should allow tagging of images, sorting by various criteria and storing copyright information If there are native GNOME and/or Windows clients for the tool, that would be a great benefit. Many thanks in advance!

    Read the article

  • Multitouch screen not detected on Asus Taichi 21DH71

    - by geekfreak
    I just bought this Ultrabook "Asus Taichi 21 DH71". This has Intel 3rd generation i7 processor and 4gb ram with 256 gb SSD. The main feature is that it is a hybrid machine. Naming it has dual screens. When the lid is closed it can be used as a tablet and when lid open it can be used as a notebook. This machine can also be used with the two screens on at the same time. I used ubuntu many years ago and loved it. But I never tried any linux later. My questions are Does the new version of Ubuntu support the Multitouch interface? Will it work specifically on this machine? Will Ubuntu support gestures on multi touchpad? Update 2/22/2013 I did try the latest 64bit Ubuntu(12.10) from live usb and noticed that it couldn't detect the tablet screen. Everything else worked seamlessly. Do you guys think the tablet screen would be detected if I make a complete installation on to the notebook? Please help guys..

    Read the article

  • Trac/SVN to DVCS Migration

    - by quanticle
    The project I'm currently working on is using Trac, with SVN integration. It's worked great until now. Now, however, we've taken on some additional developers and we're running into issues with branching and merging. Because of this, I think a move to a distributed version control system is in order. The problem is that Trac is very closely integrated with the SVN repository. We have tight integration between the tickets and the revision numbers of code changes corresponding to those tickets. In addition we have a support wiki that has a lot of data that helps the tech. support team. Is there a way we can migrate to git or mercurial without losing the benefits of Trac? I've looked at the git plugin for Trac, and I'm unsure of how well it works. Has anyone here used it with a project that's been migrated from SVN? EDIT: I should note that the most important priority for us is maintaining the links between Trac tickets and the corresponding changesets in SVN. That's a tool that we use every day, and it provides an easy way to jump to code changes when reviewing tickets. Wiki migration would be nice to have, but if it's not possible, we can continue to run the old system whilst we write some kind of a one-off script to migrate the content.

    Read the article

  • Network Printer Issue.

    - by goldenmean
    Hello, I have a Windows-7 Desktop at office. There is a network printer Dell MFP2335dn which is installed on this dekstop. The printer worked fine for me(I could print from my desktop), sometime back but recently i am not been able to print. When i give a print job, it stays in the queue for a long time, nothing gets printed. When i see the status of the printer in "Devices and Printers", it says - Offline. I removed the printer installed on my Desktop, and tried to install the drivers downloaded from Dell website: http://support.euro.dell.com/support/downloads/download.aspx?c=uk&l=en&s=gen&releaseid=R241894&formatcnt=0&libid=0&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=349205 But still the same problem. I don't know what to do more to resolve this. Any pointers about how to resolve this error and get printing done. thanks, -AD.

    Read the article

  • PHP Image gallery that integrates well into custom CMS

    - by Thorarin
    I've been trying to find an image gallery that plays nice with our custom CMS. I've evaluated a number of them, but none of them seems to have the feature list that I would like: Run on LAMP environment Free software or low license costs (the website belongs to a non-profit organisation) Multi-user support Multiple albums. We're posting concert pictures, and would like an album per event. Pluggable authentication system. I want to reuse the accounts we have for our CMS. Permissions can be done inside the gallery itself, but I want to have a single sign on solution in a maintainable manner, by writing my own plugin/add-on for the software. Upload support (multiple images at the same time) And preferrably also: Can be integrated into a PHP page layout without IFRAMEs Automatic resizing of uploaded images to a maximum size Ability for visitors to place comments This combination is proving hard to find, especially the authentication requirement. I don't want to mess around all over the place in the source code to make it use the existing authentication. A plugin would be ideal, but alternatively a well thought out software design that allows for maintainable surgical changes would be acceptable. Any suggestions on which software I should take a closer look into?

    Read the article

  • What relational database system should I learn? [closed]

    - by acidzombie24
    At the moment i know sqlite (my favorite), mysql (its ok, i get annoyed) and i do not want to learn ms/t sql (it only allows one nullable row if the column is unique). I am thinking about learning a new database system. My requirements for it is Must allow multiple connections at once (read and write) All or data i choose must be ACID compliant Performance should be good. I have a 17gb table in one project. It should perform well on read and transactional writes. With mysql it took hours to restore it and there were no foreign keys on that specific table. It only finished in a workday because i found a suggestion to adjust a setting which i think was key-buffer. And it still took hours Unique columns that allow more then one row to be null. I shouldn't have to say it but dammit MS. Allows one to make ongoing backups. Something like 'binary logs'. Some relatively small amounts of data i can grab and apply it to my local db to have it in sync with the one on the server. Table joins. I rather not write a bunch of queries to simulate a join What I would like but is not required Foreign keys. This may be a requirement later Open sourced Fair tool support. So i can measure queries, easily backup/restore, etc .NET and C (or C++) interface. (I seen one that uses raw tcp with JSON which was okish) Good subquery support. Once i was working with an older version of mysql (i believe <5.1 but it could have been 5.1) and i had to write many queries to do one query because it couldn't do subqueries. Or maybe it couldnt do it efficiently and died bc of memory limitations with a huge dataset. What db system should i learn?

    Read the article

  • What happens when you close an Adsense account?

    - by rakibtg
    I need to change my payee name, I have asked in Google Adsense product forum one of top contributor replied me: "You will have to close the account & apply again with using your real payee name. That's why they specifically state that the payee name needs to match the full name on your bank account." https://support.google.com/adsense/answer/47333?hl=en This makes sense, but got few question because the support page do not have sufficient content to help me. My questions are: What happens when you close your Adsense account? If I apply again, then what will be the process to re-gain my account? I mean should I have to apply for a website again, then Adsense team will review and approve that? Is there any chance to disapprove my account? What about current check? I have two check in my hand. So, is Google will send those check again to me with my new payee name? Anyone experienced this problem? I have asked it on Google Forum but got no answer!

    Read the article

  • How can I configure the embedded wireless card in a Toshiba Satellite Pro 4600 to work under Lubuntu 10.10?

    - by MoLE
    I'm struggling to get the embedded wireless card in this laptop to work. In 7.10 (gutsy) it worked fine. Now I'm trying to get 10.10 (maverick) working on it, and am using the Lubuntu flavour due to the low resources of this laptop. The hardware: Appears to be an embedded pcmcia card. pccardctl ident gives: Socket 0: product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", "" manfid: 0x0156, 0x0002 function: 6 (network) The default kernel recognises the card and loads the orinoco_cs driver. orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0001:0006:000e orinoco_cs 0.0: Firmware determined as Lucent/Agere 6.14 Then for some reason, the driver isn't happy with this and gives: orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0002:0009:0030 orinoco_cs 0.0: Firmware determined as Lucent/Agere 9.48 All seems ok until I try to associate with my access point using Network Manager. eth1: Lucent/Agere firmware doesn't support manual roaming repeated about 10 times then NM gives up. According to the linuxwireless.org wiki page on this driver, this is a known issue, and I quote: Known issues Roaming and WPA_supplicant Lucent/Agere firmware doesn't support manual roaming On the Agere cards, roaming is controlled by the firmware instead of userspace. You will get the above message if userspace attempts to associate with a specific AP rather than by SSID. If you are using wpa_supplicant use ap_scan=2 mode. NetworkManager uses wpa_supplicant, so the above also applies. At this point my google-fu has failed me, and I can't find how to configure network manager to use the mystical "ap_scan=2" mode via wpa_supplicant. I have tried the following suggested solutions (from launchpad or the forums) deleting the agere* files from /lib/firmware using wicd instead of network manager combining both blacklisting the orinoco_cs driver in an attempt to force use of the hostap_cs driver instead (in case it is a prism2 card). Obviously none of them have worked for me. Any hints on how to perform the suggested workaround above? Edit: I have also confirmed working on 8.10 (intrepid) live CD.

    Read the article

  • DD-WRT: What firmware and what webserver will fit on my 8MB of flash?

    - by Jeshii
    Attempting to make a portable WiFi webserver with php support on an old WRT54GS (v1.0) with DD-WRT. I have 8MB of flash on there. I know, it's a tall order. I tried the combination of dd-wrt.v24-13064_VINT_openvpn_jffs_small.bin, optware, and lighttpd. Didn't have enough space. Now I'm going to try dd-wrt.v24-13064_VINT_mini.bin, but I'm only saving 300KB, and I don't think that is going to make the difference. Any other small http servers with php support? Heck, I didn't even got to the point where I could add php! Maybe a way to calculate the size and dependencies of packages from optware BEFORE trying to install is more what I'm looking for. Any ideas?

    Read the article

  • How to migrate Lotus Notes Mail in database to Exchange public folder?

    - by elsni
    I need to migrate a Lotus Notes Mail database to Exchange. In the past, Users get mails in their Notes mail accounts and sort them manually by drag and drop in a specific folder structure in a seperate Notes mail database. This should be mapped to Exchange. I considered using outlook and a sharepoint Library mapped to outlook, but Outlook does not support drag and drop from the mail account to a standard doclib and the discussion libs do not support folders. So I think it's the easiest way to use an Exchange public folder instead of a sharepoint lib, which should work as in Notes (correct me if I'm wrong). But how I do migrate the old Notes db to the public folder including all subfolders? Thank you!

    Read the article

  • Windows 2012 Cluster on P6300 SCSI-3 Persistent Reservation issues

    - by Bruno J. Melo
    Scenario: 1 HP 6300 with latest XCS version 1 Command View 10.1 + with hosts defined as Windows 2008 2 BL460c Gen8 Servers with SPP 2012.10 and Windows Server 2012 Datacenter Edition with all the updates + MPIO feature enabled DSM v4.03.00 Cluster Analyser Tool triggers this error: Test Disk 0 does not support SCSI-3 Persistent Reservations commands needed to support clustered Storage Pools. Some storage devices require specific firmware versions or settings to function properly with failover clusters. Please contact your storage administrator or storage vendor to check the configuration of the storage to allow it to function properly with failover clusters. Any ideas? Thanks for your help!

    Read the article

  • Oracle Forms: Walking the path to FMW Platform – webcast September 24th 2012

    - by JuergenKress
    The next 5 year Strategy Preparing for the Next Generation Applications Oracle Forms, a component of Oracle Fusion Middleware, is Oracle's long-established technology to design and build enterprise applications quickly and efficiently. Oracle remains committed to the development of this technology, and to the ongoing release as a component of the Oracle platform. This continuing commitment to Forms technology enables you to leverage your existing investment by easily upgrading and integrating existing Oracle Forms applications to take advantage of web technologies and service oriented architectures (SOA). For more information please visit our Forms OTN page. Agenda Why update? – New business imperatives What is the path? Why walk it with Oracle? Support Lifetime – upgrade to updates Summary Audience Enterprise & Solution Architects R&D leaders Project Managers and Project Leaders Delivery Format This FREE online LIVE eSeminar will be delivered over the Web and Conference Call. Duration 1 hour Forms: Walking the path to FMW September 24th, 2012, 9am BST Register Here! WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Forms,PTS,future of forms,forms roadmap,forms soa,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • New video card? [closed]

    - by TutorialPoint
    I ran into some problems with my ATI Radeon x1200. I want it to support vertex shader 3.0, but it only does 2.0. This is because Call of Duty: Modern Warfare 2 only works with 3.0. So, I want a new video card. Can someone help me, with a more clean look to it? I bet if I would stick to some seller, I would end up with a video card that does not support what I want, or is too expansive. I really do not want it to be above $75, if possible. Some info about my PC: Manufacter: XXODD Processor: AMD Athlon64 X2 DualCore 4000+ 2Ghz (but running currently 32 bit OS) ATI Radeon X1200 video card (the problem) 1 GB RAM DDR2 MS-7367 Motherboard Windows 7 Ultimate OS 32-Bit Build 7600 RTM

    Read the article

  • How to reduce the CPU load on a hosting with WordPress installed as a CMS? [on hold]

    - by Akky Awesøme
    I have been using hostgators hatchling plan for three months. I got an email from the hosting that my website is creating an over load on CPU. They said that I am eating up their processor and as a precaution, they have temporarily suspended my account. When I contacted their customer support, they said: You have to optimize your database and use some sort of caching mechanism, where the script does not need to generate a new page with every request, helps to lower the over load that a script will cause. I am not a technical geek, I am wondering how I will do this thing. I don't have any resource to hire a web developer to do this job. My website is down for 48hours. I was using wp super cache along with cloudfare's free support. Now I have intalled optimize-db plugin and optimized my database. Please provide me with some more tips on how to optimize my database to reduce CPU usage. Any help would be appreciated.

    Read the article

  • Jumbo Frames on DIR-655

    - by Spookyone
    I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

    Read the article

  • Is it safe to expect Sun Java 6 to supported for the life of RHEL 6?

    - by Ophidian
    I'm in the planning stages of a java application that we're targeting for Red Hat Enterprise Linux 6. Unfortunately, we're stuck at RHEL 6.1 which does not ship the java-1.7.0-oracle package set (they were added in 6.3) and I don't really have any control over when we will be upgraded to the more recent version. I don't have any specific technical requirements to use Java 7, but Java 6 is going to hit public EOL in February 2013. Am I safe to assume that since Red Hat (and subsequently Oracle with its Oracle Unbreakable Linux) has shipped a copy of Java 6 in the java-1.6.0-sun package, it will support it for the entire 10 year support life of RHEL6?

    Read the article

  • Procurement and E-Business Suite Product Analyzers .. Can you use this tool to resolve your SR?

    - by LindaJ-Oracle
    Procurement and E-Business Suite Product Analyzers (Doc ID 1545562.1). Analyzers are Query/Read only tools with easy to read html output. The tools are delivered by EBS Support via My Oracle Support documents ids for ease of use. The Analyzer scripts are meant to be part of your Production maintenance program by your Sysadmin, or to designated end users. The result set is an easy to read html output that provides recommendations, solutions and early warnings to of items that should be reviewed and correct. Each analyzer can be ran on demand or scheduled for repeatability and emailed to critical reviewers. There are several Analyzers available for E-Business Suite Applications Technology Group, Financials, and Manufacturing including some of the following topics.  Review them all at (Doc ID 1545562.1). Workflow Concurrent Processing Clone Log Parser Utility (Rapid Clone) Invoices, Payments, Accounting, Suppliers and EBTax Validate Data before Period Close EBTax Setup Payables Trial Balance Internet Expenses AutoInvoice Post-Process ASCP Performance PO Approval iProcurement Items For the Procurement specific Analyzers access them directly at: R12 IP Item Analyzer Diagnostic Script (Doc ID 1586248.1) R12: PO Approval Analyzer Diagnostic Script (Doc ID 1525670.1)

    Read the article

  • Booting off a ZFS root in 14.04

    - by RJVB
    I've been running a Debian derivative (LMDE) on a ZFS root for half a year now. It was created by cloning a regular ext4-based install with all the necessary packages onto a ZFS pool, chrooting into that pool and recreating a grub menu and bootloader. The system uses an ext-3 dedicated /boot partition. I would like to do the same with Ubuntu 14.04, but have encountered several obstacles. There is no Trusty zfs-grub package The default grub package doesn't have ZFS support built in. I found a small bug in the build system responsible for that (report with patch created) and built my own grub packages. The built-in ZFS support is dysfunctional, it does not add the proper arguments to the kernel command line I thus installed the ZoL grub package I also use on my LMDE system, which does give me a correct grub.cfg However, even with that correct grub.cfg, the boot process apparently doesn't retrieve the bootfs parameter from the ZFS pool; instead the variable that's supposed to receive the value remains empty. As a result, initrd tries to load the default pool ("rpool"), which fails of course. I can however import the pool by hand, and complete the process by hand. If memory serves me well, I also had to disable apparmor, to avoid the boot process from blocking after importing the pool. Am I overlooking something? Just for comparison, I installed the Ubuntu 3.13 kernel on my LMDE system, and that works just fine (i.e. the identical kernel and grub binaries allow successful booting without glitches on LMDE but not on Ubuntu).

    Read the article

  • WebLogic Partner Community Newsletter October 2013

    - by JuergenKress
    Dear WebLogic Partner Community member, Our October newsletter edition focuses on Oracle OpenWorld 2013, highlights, keynotes and all presentations. Thanks to all the partners who made the conference a huge success, if you could not come to San Francisco, you can find all the details in this newsletter. We added additional locations for the free hands-on ADF & ADF Mobile Bootcamps & WebLogic Bootcamps. As a community member you can also get a free voucher to become a WebLogic Server 12c Certified Implementation Specialist or ADF 11g Certified Implementation Specialist (limited to partners from EMEA!) If you can not make it to a Bootcamp, do not miss the virtual developer days for WebLogic and ADF Mobile. If you plan to install WebLogic read first the article “Setup a 12c Fusion Middleware Infrastructure from René van Wijk. If you administrate Middleware make sure you read the documentation and support notes Weblogic Server Patching & Maintenance Information Center. In the ADF section of the newsletter our product management team continues with the ADF Architecture on-demand training. Andrejus released the latest version of the ADF Performance Audit Tool v 2.0. The summer is over, if you look for a Christmas present, for your kids or yourself maybe you want to run Java on LEGO® Mindstorms® EV3. Jürgen Kress To read the newsletter please visit http://tinyurl.com/WebLogicNewsOctober2013 (OPN Account required) To become a member of the WebLogic Partner Community please register at http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic Community newsletter,newsletter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • 64-bit Hardware Virtualization on VirtualBox

    - by Cat
    I am trying to set up a SQL Server practice lab using VirtualBox and a trial copy of Windows Server 2K8 R2 in ISO format. I received an error message that states my processor does not support 64-bit hardware virtualization. Although I "Enabled" Intel ardware virtualization in the BIOS that still doesn't work. According to the Intel website, the processor does support VT-x, however the accelerated tab in VirtualBox is greyed out and no references to VT-x are mentioned in the settings options available to me. Any ideas on how I can get around this? I checked around ServerFault and couldn't find anything but if I missed an applicable post a link is great too. Specs below - if additional information is needed please comment and I will provide. Thanks in advance. VirtualBox version - 4.1.18 Hardware - Lenovo B570 1068-A3U i3-2310M

    Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >