Search Results

Search found 16287 results on 652 pages for 'browser refresh'.

Page 192/652 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

• JFall 2012

  - by Geertjan

  JFall 2012 was over far too soon! Seven tracks going on simultaneously in a great location, with many artifacts reminding me of JavaOne, and nice snacks and drinks afterwards. The day started, as such things always do, with a keynote. Thanks to @royvanrijn for the photo below, I didn't take any myself and without a picture this report might have been too dry: What you see above is Steve Chin riding into the keynote hall on his NightHacking bike. The keynote was interesting, I can't be too complimentary about it, since I was part of it myself. Bert Ertman introduced the day and then Steve Chin took over, together with Sharat Chander, Tom Eugelink, Timon Veenstra, and myself. We had a strict choreography for the keynote, one that would ensure a lot of variation and some unexpected surprises, such as Steve being thrown off the stage a few times by Bert because of mentioning JavaOne too many times, rather than the clearly much cooler JFall. Steve talked about JavaOne and the direction Java is headed in, Sharat talked about JavaME and embedded devices, Steve and Tom did a demo involving JavaFX, I did a Project Easel demo, and Timon from Ordina talked about his Duke's Choice Award winning AgroSense project. I think the Project Easel demo (which I repeated later in a screencast for Parleys arranged by Eugene Boogaart) came across well and several people I spoke to especially like the roundtrip/bi-directional work that can be done, from browser to IDE and back again, very simply and intuitively. (In a long conversation on the drive back home afterwards, the scenario of a designer laying out the UI in HTML and then handing the HTML to a developer for back-end work, a developer who would then find it convenient to open the HTML in a browser and quickly navigate from the browser to the resources within the IDE, was discussed and considered to be extremely interesting and worth considering adopting NetBeans for, for no other reason than that.) Later I attended a session by David Delabassee on Java EE 7, Hans Dockter on Gradle, and Sander Mak on cross-build injection attacks. I was sorry to have missed Martijn Verburg's session, which sounded like it was really fantastic, among others, such as Gerrit Grunwald. I did a session too, entitled "Unlocking the Java EE 6 Platform", which was very well attended, pretty much a full room, and the demo went very smoothly. I talked to many people, e.g., a long time with Hans Dockter about how cool Gradle is and how great the Gradle/NetBeans plugin is turning out to be. I also had a long conversation (and did a demo) with Chris Chedgey, from Structure101, after his session, which was incredibly well attended; very interesting how popular modularity is. I met several people for the first time, as well as some colleagues from past places I've worked at. All in all, it was a great conference, unfortunately too short, which was very well attended (clearly over 1000) people, with several international speakers, as well as international attendees such as Mattias Karlsson, Sweden JUG leader. And, unsurprisingly, I came across NetBeans Platform applications again, none of which I had ever heard of before. In each case, "our fat client application" was mentioned in passing, never as a main application, and never in a context where there are plans for the application to be migrated to the web or mobile, simply because doing so makes no business sense at all. Great times at JFall, looking forward to meeting with some of the people I met again soon.

  Read the article

• Access Control Service: Transitioning between Active and Passive Scenarios

  - by Your DisplayName here!

  As I mentioned in my last post, ACS features a number of ways to transition between protocol and token types. One not so widely known transition is between passive sign ins (browser) and active service consumers. Let’s see how this works. We all know the usual WS-Federation handshake via passive redirect. But ACS also allows driving the sign in process yourself via specially crafted WS-Federation query strings. So you can use the following URL to sign in using LiveID via ACS. ACS will then redirect back to the registered reply URL in your application: GET /login.srf?   wa=wsignin1.0&   wtrealm=https%3a%2f%2faccesscontrol.windows.net%2f&   wreply=https%3a%2f%2fleastprivilege.accesscontrol.windows.net%3a443%2fv2%2fwsfederation&   wp=MBI_FED_SSL&   wctx=pr%3dwsfederation%26rm%3dhttps%253a%252f%252froadie%252facs2rp%252frest%252f The wsfederation bit in the wctx parameter indicates, that the response to the token request will be transmitted back to the relying party via a POST. So far so good – but how can an active client receive that token now? ACS knows an alternative way to send the token request response. Instead of doing the redirect back to the RP, it emits a page that in turn echoes the token response using JavaScript’s window.external.notify. The URL would look like this: GET /login.srf?   wa=wsignin1.0&   wtrealm=https%3a%2f%2faccesscontrol.windows.net%2f&   wreply=https%3a%2f%2fleastprivilege.accesscontrol.windows.net%3a443%2fv2%2fwsfederation&   wp=MBI_FED_SSL&   wctx=pr%3djavascriptnotify%26rm%3dhttps%253a%252f%252froadie%252facs2rp%252frest%252f ACS would then render a page that contains the following script block: <script type="text/javascript">     try{         window.external.Notify('token_response');     }     catch(err){         alert("Error ACS50021: windows.external.Notify is not registered.");     } </script> Whereas token_response is a JSON encoded string with the following format: {   "appliesTo":"...",   "context":null,   "created":123,   "expires":123,   "securityToken":"...",   "tokenType":"..." } OK – so how does this all come together now? As an active client (Silverlight, WPF, WP7, WinForms etc). application, you would host a browser control and use the above URL to trigger the right series of redirects. All the browser controls support one way or the other to register a callback whenever the window.external.notify function is called. This way you get the JSON string from ACS back into the hosting application – and voila you have the security token. When you selected the SWT token format in ACS – you can use that token e.g. for REST services. When you have selected SAML, you can use the token e.g. for SOAP services. In the next post I will show how to retrieve these URLs from ACS and a practical example using WPF.

  Read the article

• SharePoint: Numeric/Integer Site Column (Field) Types

  - by CharlesLee

  What field type should you use when creating number based site columns as part of a SharePoint feature? Windows SharePoint Services 3.0 provides you with an extensible and flexible method of developing and deploying Site Columns and Content Types (both of which are required for most SharePoint projects requiring list or library based data storage) via the feature framework (more on this in my next full article.) However there is an interesting behaviour when working with a column or field which is required to hold a number, which I thought I would blog about today. When creating Site Columns in the browser you get a nice rich UI in order to choose the properties of this field: However when you are recreating this as a feature defined in CAML (Collaborative Application Mark-up Language), which is a type of XML (more on this in my article) then you do not get such a rich experience.  You would need to add something like this to the element manifest defined in your feature: <Field SourceID="http://schemas.microsoft.com/sharepoint/3.0"        ID="{C272E927-3748-48db-8FC0-6C7B72A6D220}"        Group="My Site Columns"        Name="MyNumber"        DisplayName="My Number"        Type="Numeric"        Commas="FALSE"        Decimals="0"        Required="FALSE"        ReadOnly="FALSE"        Sealed="FALSE"        Hidden="FALSE" /> OK, its not as nice as the browser UI but I can deal with this. Hang on. Commas="FALSE" and yet for my number 1234 I get 1,234.  That is not what I wanted or expected.  What gives? The answer lies in the difference between a type of "Numeric" which is an implementation of the SPFieldNumber class and "Integer" which does not correspond to a given SPField class but rather represents a positive or negative integer.  The numeric type does not respect the settings of Commas or NegativeFormat (which defines how to display negative numbers.)  So we can set the Type to Integer and we are good to go.  Yes? Sadly no! You will notice at this point that if you deploy your site column into SharePoint something has gone wrong.  Your site column is not listed in the Site Column Gallery.  The deployment must have failed then?  But no, a quick look at the site columns via the API reveals that the column is there.  What new evil is this?  Unfortunately the base type for integer fields has this lovely attribute set on it: UserCreatable = FALSE So WSS 3.0 accordingly hides your field in the gallery as you cannot create fields of this type. However! You can use them in content types just like any other field (except not in the browser UI), and if you add them to the content type as part of your feature then they will show up in the UI as a field on that content type.  Most of the time you are not going to be too concerned that your site columns are not listed in the gallery as you will know that they are there and that they are still useable. So not as bad as you thought after all.  Just a little quirky.  But that is SharePoint for you.

  Read the article

• Server-Sent Events using GlassFish (TOTD #179)

  - by arungupta

  Bhakti blogged about Server-Sent Events on GlassFish and I've been planning to try it out for past some days. Finally, I took some time out today to learn about it and build a simplistic example showcasing the touch points. Server-Sent Events is developed as part of HTML5 specification and provides push notifications from a server to a browser client in the form of DOM events. It is defined as a cross-browser JavaScript API called EventSource. The client creates an EventSource by requesting a particular URL and registers an onmessage event listener to receive the event notifications. This can be done as shown var url = 'http://' + document.location.host + '/glassfish-sse/simple';eventSource = new EventSource(url);eventSource.onmessage = function (event) { var theParagraph = document.createElement('p'); theParagraph.innerHTML = event.data.toString(); document.body.appendChild(theParagraph);} This code subscribes to a URL, receives the data in the event listener, adds it to a HTML paragraph element, and displays it in the document. This is where you'll parse JSON and other processing to display if some other data format is received from the URL. The URL to which the EventSource is subscribed to is updated on the server side and there are multipe ways to do that. GlassFish 4.0 provide support for Server-Sent Events and it can be achieved registering a handler as shown below: @ServerSentEvent("/simple")public class MySimpleHandler extends ServerSentEventHandler { public void sendMessage(String data) { try { connection.sendMessage(data); } catch (IOException ex) { . . . } }} And then events can be sent to this handler using a singleton session bean as shown: @Startup@Statelesspublic class SimpleEvent { @Inject @ServerSentEventContext("/simple") ServerSentEventHandlerContext<MySimpleHandler> simpleHandlers; @Schedule(hour="*", minute="*", second="*/10") public void sendDate() { for(MySimpleHandler handler : simpleHandlers.getHandlers()) { handler.sendMessage(new Date().toString()); } }} This stateless session bean injects ServerSentEventHandlers listening on "/simple" path. Note, there may be multiple handlers listening on this path. The sendDate method triggers every 10 seconds and send the current timestamp to all the handlers. The client side browser simply displays the string. The HTTP request headers look like: Accept: text/event-streamAccept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3Accept-Encoding: gzip,deflate,sdchAccept-Language: en-US,en;q=0.8Cache-Control: no-cacheConnection: keep-aliveCookie: JSESSIONID=97ff28773ea6a085e11131acf47bHost: localhost:8080Referer: http://localhost:8080/glassfish-sse/faces/index2.xhtmlUser-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.54 Safari/536.5 And the response headers as: Content-Type: text/event-streamDate: Thu, 14 Jun 2012 21:16:10 GMTServer: GlassFish Server Open Source Edition 4.0Transfer-Encoding: chunkedX-Powered-By: Servlet/3.0 JSP/2.2 (GlassFish Server Open Source Edition 4.0 Java/Apple Inc./1.6) Notice, the MIME type of the messages from server to the client is text/event-stream and that is defined by the specification. The code in Bhakti's blog can be further simplified by using the recently-introduced Twitter API for Java as shown below: @Schedule(hour="*", minute="*", second="*/10") public void sendTweets() { for(MyTwitterHandler handler : twitterHandler.getHandlers()) { String result = twitter.search("glassfish", String.class); handler.sendMessage(result); }} The complete source explained in this blog can be downloaded here and tried on GlassFish 4.0 build 34. The latest promoted build can be downloaded from here and the complete source code for the API and implementation is here. I tried this sample on Chrome Version 19.0.1084.54 on Mac OS X 10.7.3.

  Read the article

• Modernizr Rocks HTML5

  - by Laila

  HTML5 is a moving target.  At the moment, we don't know what will be in future versions.  In most circumstances, this really matters to the developer. When you're using Adobe Air, you can be reasonably sure what works, what is there, and what isn't, since you have a version of the browser built-in. With Metro, you can assume that you're going to be using at least IE 10.   If, however,  you are using HTML5 in a web application, then you are going to rely heavily on Feature Detection.  Feature-Detection is a collection of techniques that tell you, via JavaScript, whether the current browser has this feature natively implemented or not Feature Detection isn't just there for the esoteric stuff such as  Geo-location,  progress bars,  <canvas> support,  the new <input> types, Audio, Video, web workers or storage, but is required even for semantic markup, since old browsers make a pigs ear out of rendering this.  Feature detection can't rely just on reading the browser version and inferring from that what works. Instead, you must use JavaScript to check that an HTML5 feature is there before using it.  The problem with relying on the user-agent is that it takes a lot of historical data  to work out what version does what, and, anyway, the user-agent can be, and sometimes is, spoofed. The open-source library Modernizr  is just about the most essential  JavaScript library for anyone using HTML5, because it provides APIs to test for most of the CSS3 and HTML5 features before you use them, and is intelligent enough to alter semantic markup into 'legacy' 'markup  using shims  on page-load  for old browsers. It also allows you to check what video Codecs are installed for playing video. It also provides media queries  and conditional resource-loading (formerly YepNope.js.).  Generally, Modernizr gives you the choice of what you do about browsers that don't support the feature that you want. Often, the best choice is graceful degradation, but the resource-loading feature allows you to dynamically load JavaScript Shims to replace the standard API for missing or defective HTML5 functionality, called 'PolyFills'.  As the Modernizr site says 'Yes, not only can you use HTML5 today, but you can use it in the past, too!' The evolutionary progress of HTML5  requires a more defensive style of JavaScript programming where the programmer adopts a mindset of fearing the worst ( IE 6)  rather than assuming the best, whilst exploiting as many of the new HTML features as possible for the requirements of the site or HTML application.  Why would anyone want the distraction of developing their own techniques to do this when  Modernizr exists to do this for you? Laila

  Read the article

• fedora12, yum not releasing "lock" after performing an action

  - by James.Elsey

  Hello, This problem has been occurring quite frequently recently and I can't seem to find a way of preventing it. Whenever I perform an action with yum such as to install or remove software, it appears to execute successfully but then I'm unable to move onto the next yum command For example, I executed yum remove skype, it appeared to remove ok, but next when I try to yum search skype it appears that yum is still processing, and I have to manually kill that process via kill 1234 (or whatever the PID is) My output is as follows [root@nevada james]# yum remove skype Loaded plugins: presto, refresh-packagekit Setting up Remove Process Resolving Dependencies --> Running transaction check ---> Package skype.i586 0:2.1.0.47-fc10 set to be erased --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Removing: skype i586 2.1.0.47-fc10 installed 24 M Transaction Summary ================================================================================ Remove 1 Package(s) Reinstall 0 Package(s) Downgrade 0 Package(s) Is this ok [y/N]: y Downloading Packages: Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Erasing : skype-2.1.0.47-fc10.i586 1/1 Removed: skype.i586 0:2.1.0.47-fc10 Complete! [root@nevada james]# yum search skype Loaded plugins: presto, refresh-packagekit Existing lock /var/run/yum.pid: another copy is running as pid 3639. Another app is currently holding the yum lock; waiting for it to exit... The other application is: PackageKit Memory : 79 M RSS (372 MB VSZ) Started: Fri Dec 18 08:39:18 2009 - 00:01 ago State : Sleeping, pid: 3639 Kernel version : 2.6.31.6-166.fc12.x86_64 Any ideas how I can prevent this behaviour? Thanks

  Read the article

• Unexpected behaviour when dynamically add node in HAproxy server

  - by Anand Soni

  I wanted to use HAProxy for my web app for load balancing purpose. I am trying to add a new rabbitmq node dynamically in HAProxy server using command : haproxy -p /var/run/haproxy.pid -sf $(cat /var/run/haproxy.pid). I am doing tcp connection mode with leastconn balance algorithm in load balancing. What is expected is when there is 3 connection in one rabbitmq, I add a new rabbit server in HAProxy server. so the next connection would pass to 2nd rabbitmq server which is not happening in my case. It distributes the connection in haphazardly manner. Here is my config file: defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 5000 srvtimeout 5000 listen rabbitmq 0.0.0.0:5672 mode tcp stats enable balance leastconn option tcplog server rabbit01 xx.xx.xx.xx:5672 check server rabbit02 xx.xx.xx.xx:5672 check listen tomcatq 0.0.0.0:80 mode http stats enable balance roundrobin stats refresh 10s stats refresh 10s stats uri /lb?stats stats auth admin:admin option httplog What is the problem causing this behavior? Any suggestion will appreciated.

  Read the article

• IIS7 Session ID rotating with Classic ASP

  - by ManiacZX

  I am trying to migrate a Classic ASP app onto a Windows 2008 R2 server. The application features run fine, but I am having issue with session. The application keeps the logged in user information in session and I am constantly getting knocked out as if the session had expired. While debugging I have discovered the sessions are not expiring but instead I am getting 2-3 different Session IDs in use by one browser. I am outputting Response.Write(Session.SessionID) on various pages in the application and I can sit there and hit refresh over and over and watch the number changed between these 2-3 SessionIDs randomly. The sessions are still valid because when I refresh and get the Session ID that I logged in under the page is displayed (because the security check was successful) and when I get one of the other Session IDs I get the "you aren't logged in, you need to log in" message. If I close and re-open the browser, same story just the set of IDs are new. This happens with IE8, Firefox and Chrome from multiple computers. Things I've tried: - AppPool set to No Managed Code and Classic - Output Caching set .asp to never cache - ASP Session Properties enabled and disabled asp session state and confirmed it affected page (error trying to read Session.SessionID when disabled) Things I've tried just in case but shouldn't have anything to do with ASP Session: - Disabled compression - Changed ASP.Net Session State properties (InProc, StateServer, SQLServer, Cookies, URI, etc) -

  Read the article

• Apache times out after 2 minutes, when Apache TimeOut is 1200

  - by Robert Gowland

  We have a set up where the browser makes an http request to Box A which in turn makes an http request to Box B. What we're encountering is that Box A waits for Box B to respond for two minutes then the users sees: The page cannot be displayed Explanation: There is a problem with the page you are trying to reach and it cannot be displayed. Try the following: * Refresh page: Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion. * Check spelling: Check that you typed the Web page address correctly. The address may have been mistyped. * Access from a link: If there is a link to the page you are looking for, try accessing the page from that link. Technical Information (for support personnel) * Error Code: 404 Not Found. The requested item could not be located. (12028) Watching the logs on Box B we see that it takes 5 minutes to do the work requested. The problem is that the apache time outs on both boxes are set 1200 (20m), not 120 (2m). Any ideas where to look?

  Read the article

• "The zone can be scavenged after" keeps incrementing

  - by kce

  What are you trying to do? I'm trying to enable DNS scavenging on a DNS zone that has about a hundred stale DNS records. What have you tried in order to make it happen? I setup DNS Scavenging per everyone's favorite TechNet Blog post: Don't be afraid of DNS Scavenging. Just be patient. I first disabled scavenging on all of our domain controllers: DNSCmd . /ZoneResetScavengeServers contoso.com 192.168.1.1 192.168.1.2 I then enabled automatic scavenging on the DNS zone: I then enabled DNS scavenging on one of the domain controllers: I then found a few records that I expected to get delete with timstamps from a few years ago and ensured that that the Delete this record when it becomes stale and that time stamp was actually set: Finally I reloaded the zone and waited 14 days (the sum of the Refresh + No-Refresh periods). What results did you expect? I expected to see a 2501 Event in the DNS server logs noting the deletion of a bunch of DNS records. What actually happened? Nothing happened. The Zone Aging/Scavenging Properties showed that the zone could be scavenged after 6/12/2014 10:00:00 AM last week. No 2501/2502 events were recorded. All of the records with "aged" time stamps are still present. The date at which the zone can be scavenged after incremented another seven days to ?6/?18/?2014 10:00:00 AM. As I understand it until that date stays at least 14 days in the past nothing will ever even be eligible for scavenging let alone actually be scavenged. The only 2501 events recorded in the event logs are ones that I have triggered by right clicking and selecting "Scavenge Stale Resource Records". They note that scavenging will try to run again in 168 hours which was this morning. I have DNS scavenging enabled for a few months and have waited patiently for something to happen. I have reloaded the zone multiple times (which resets this timestamp). What am I missing here?

  Read the article

• Google Chrome not loading web pages correctly unless multiple refreshes

  - by Brandon Wilson

  Webpages in Google Chrome do not load correctly from time to time. I can't reproduce it, it just happens. Some times it happens when I load the browser other times it happens when I am just browsing. Just now I went to five different web sites which 3 out of 5 of them did not load correctly. I have attached a photo of how Super User loaded the first time I loaded it. If I refreshed it it will load correctly. Facebook is bad like this. Some times Facebook will load correctly but some of there back end scripting may not load so the page may not refresh automatically. Not sure what is going on. I have tried other browsers (Firefox and Internet Explorer) and they seem to be working correctly. Chrome seems to be acting up only on this computer. All my computers are running Windows 8 and I have removed Chrome completely off this computer and re-installed. I even disabled all extensions and cleared all the caches. I even tried running Chrome without being logged in. Not sure what else to do at this point. An example of superuser.com not loading correctly: When I refresh the problem will go away until it happens again. Sometimes it takes two or three refreshes in order for it to correctly load.

  Read the article

• BlazeDS first response is VERY SLOW

  - by chibban

  Hi everyone, I have a very strange an annoying problem: I have an appliaction written in Flex 3, with BlazeDS 3.2 and Java in the backend. I'm actually using a portal (liferay) to display portlets that contain Flex movies. When I hit a refresh button on my page, all the Flex movies send a RemoteObject request to the server (using BlazeDS), which should go to java classes and invoke a method (standard BlazeDS usage I 'm guessing). I'm experiencing VERY slow response (14 minutes) on the first hit, while the following hits are much faster. I've enabled the BlazeDS logging (logging level="All") and I also have debug prints coming from my java classes. I also use the "showBusyCursor" attribute for the RemoteObject - so I can see indication of the request being sent from the flex movie. Here is what I see: I hit the refresh button Each movie invokes a RemoteObject request I see a busy sign - in all the movies I see nothing in the log - no BlazeDS prints and no Java prints Wait 14 minutes or so I see BlazeDS prints followed by Java prints I see data populating my flex movies. The really weird thing is that I have the same "application" installed in 4 different computers (on my laptop and in 3 other unix machines), 3 of these installations work well (good response times) and only 1 has the issue I'm describing. I've tried many things, but everything failed. I'd be really happy to get some advice on this. Thanks

  Read the article

• Apache times out after 2 minutes, when Apache TimeOut is 120

  - by Robert Gowland

  We have a set up where the browser makes an http request to Box A which in turn makes an http request to Box B. What we're encountering is that Box A waits for Box B to respond for two minutes then the users sees: The page cannot be displayed Explanation: There is a problem with the page you are trying to reach and it cannot be displayed. Try the following: * Refresh page: Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion. * Check spelling: Check that you typed the Web page address correctly. The address may have been mistyped. * Access from a link: If there is a link to the page you are looking for, try accessing the page from that link. Technical Information (for support personnel) * Error Code: 404 Not Found. The requested item could not be located. (12028) Watching the logs on Box B we see that it takes 5 minutes to do the work requested. The problem is that the apache time outs on both boxes are set 1200 (20m), not 120 (2m). Any ideas where to look?

  Read the article

• If I partition a drive connected via eSata will it show different partitions when connected via USB?

  - by jeffreypriebe

  I have an odd problem with an external drive. I'm formatting it connected to my laptop prior to connecting it to my router. The HDD enclosure has both an eSata and USB connections. Generally, I connect it via eSata to my laptop. I created my partitions and connected it to the router, but I see partition information that is different than what I created. After chasing leads concerning large HDD size, I mindlessly connected the HDD to my laptop with USB. Lo! I see the same partitions as the router. Attached are screenshots using the same program and the HDD in question. The only difference is the connection. For the first, I connected via eSata and hit "refresh" on the partition program. Then, turned off the HDD, disconnected the eSata cable, and connected via USB. Power and refresh. eSata: reports a total HDD size of 2328 GB, with four partitions (the third being 1.96TB) USB: reports a total HDD size of 280 GB, with three partitions (the third being 279 GB) Any idea why this is happening? It looks like it clearly is an issue of the 4K sector size and not playing nice with the USB enclosure. I tried it eSata and USB in Windows and Linux and it appears consistently that eSata is reporting correctly, USB incorrectly.

  Read the article

• Some process/service/driver repeatedly presses F5

  - by VitalyB

  Hi everyone, I have the strangest problem that started 2 days ago (Windows7, 64bit). SOMETHING causes my F5 key to be constantly pressed. Rebooting helps, but only for a while, it keeps coming back to that. So far I've tried to disconnect and reconnect the keyboard (physically), however, disconnecting the keyboard doesn't actually do anything. Reconnecting it back again, causes the F5-pressing to stop, but not for very long (seconds/minutes). I'd really like to avoid a binary search for the programs (process closing/keyboard switching/etc) before I can, at the very least, identify the source of the keypress. Is there an application that can show me what is causing a key press? E.g is it the keyboard driver, or some process that executes SendKey repeatedly for reasons unknown. Thanks! P.S FYI, having F5 causes the strangest side effects. Task Manager refreshes very very quickly (as F5 is refresh), the desktop is constantly flickering and all the browsers stop working as they keep trying to refresh. I was lucky to find out what the heck is happening only because I started notepad and saw that current date/time started to appear constantly. If not that, I'd still be wondering.

  Read the article

• Mapped network drive connection timeout

  - by Terix

  I have server "Alpha" and server "Beta". Server Beta has a shared folder, that is mapped on server Alpha as "X:" On server Alpha there is a .vbs script that runs and take some files on local drive and copy them on X: drive. My issue is if no user log on server Alpha for a long time, it seems like the tcp connection underneath the mapped drive has a timeout, and the vbs script fails on the copy of file. As soon I log with remote desktop on Alpha server, the .vbs is successfull on the copy of the files. I have made many tests, using file logs to check what was happening and I found no way to refresh the connection and let the .vbs be able to copy files unattended.. I have always to log with remote desktop on Alpha server to refresh the connection and let the .vbs copy the files without issues. What can I do to avoid to log every time? The .vbs script runs 3 times a day and is very annoying. I do not have control over server Beta so I cannot change anything there, and I am very limited on changes I can do on server Alpha ( I cannot change registry and that sort of things)

  Read the article

• Windows 7 breaks even in safe mode

  - by delenda

  Hi, I have a Dell XPS M1730 with Windows 7 installed. I noticed last night that after a few hours of use, the fans kicked into full and I couldn't do anything without it taking forever. Minimising windows, opening device manager or even opening process explorer took minutes and a game install I had just started took nearly 4 hours to complete. When procexp finally loaded, the refresh was so slow that it was mostly useless. From what I could gather, it was reporting 60% idle processes with procexp using nearly 40%. There were no hardware interrupts listed. When I rebooted, the problem went away for about 10 minutes and then the same thing happened. The issue persists in safe mode and even after I removed the graphics drivers, which have been an issue in the past, it still happens. Icons flash quite quickly on the desktop periodically and screen refresh is painfully slow. When booting now, the fans kick in to full as soon as the windows logon box comes up and it's taking 10 minutes to bring the desktop up. Chkdsk reports nothing and the raid check says that everything is fine. I'm thinking hardware failure, probably HDD but wanted some other opinions. I'm planning to try a linux live cd to see if it works without using the hard disks. If anyone has any input, it would be greatly appreciated. Delenda

  Read the article

• 85 Hz on old/new driver looks the same like 75 Hz on previous one?

  - by jon

  I have old philips 107T5 CRT and Nvidia graphics card. I used old Nvidia driver (but it wasn't 'legacy' one when I installed it) for few years but recently I decided to install other Linux distribution. I used 75 Hz refresh rate and 1024x768 resolution on my previous distribution. After I installed the new distribution I had to install a Nvidia driver so I downloaded one from the Nvidia site (this time only legacy supported my card so I downloaded legacy and installed it). It wasn't automatically updating xorg.conf but I had my previous xorg.conf copy and I used it. When I run X I could only choose 85 and 75 Hz, 85 was checked as default. And now what shocks me: that default 85 Hz looks identically like 75 Hz on previous driver looked (at least to me). I tried 75 Hz out of curiosity and it's too bright, hurts, etc. But on the previous driver 75 Hz wasn't hurting my eyes. Why is it different? It's the same number after all, so it should always give the same results, right? That's my first question. Second question: Is 85 Hz OK for that monitor model? Would it break it? I tried to find the optimal refresh rate for this model but couldn't find it.

  Read the article

• Unexpected behaviour in a Lotus Notes programmable table

  - by Mark B

  I'm designing a workflow database in Lotus Notes 6.0.3 (soon upgrading to 8.5), and my OS is Windows XP. I have recently tried converting a tabbed table into a programmable one. This was so that I could control which tab was displayed to the user when it was opened, so that they were presented with the most appropriate one for that document's progress through the workflow. That part of it works! One of the tabs features a radio button that controls visibility of the next tab, and a pair of cascading dialogue boxes. One contains the static list "Person":"Team", and the other has a formula based on the first: view:=@If(PeerReview = "Team"; "GroupNames"; "GroupMembers"); @Unique(@DbColumn(""; ""; view; 1)) The dialogue boxes have the property "Refresh fields on keyword change" selected. The behaviour that I wasn't expecting is this. If the radio button is set to "Yes" and a value is selected in one of the dialogue boxes, the table opens the next tab. If the radio button is set to "No" and a value is selected in one of the dialogue boxes, the entire table is hidden. I can duplicate the latter by switching off the "Refresh fields on keyword change" property on the dialogue boxes and instead pressing F9 after selecting a value. I have no idea why the former occurs, though. The table is called "RFCInfo", and I have a field on the form called "$RFCInfo" which is editable, hidden from all users who aren't me and initially set by a Postopen script, which I can post if necessary - it's essentially a Select Case statement that looks at a particular item value and returns the name of the table row relating to that value. Can anyone offer any pointers?

  Read the article

• What is a good alternative to the WPF WebBrowser Control?

  - by VoidDweller

  I have an MDI WPF app that I need to add web content to. At first, great it looks like I have 2 options built into the framework the Frame control and the WebBrowser control. Given that this is an MDI app it doesn't take long to discover that neither of these will work. The WPF WebBrowser control wraps up the IE WebBrowser ActiveX Control which uses the Win32 graphics pipeline. The "Airspace" issue pretty much sums this up as "Sorry, the layouts will not play nice together". Yes, I have thought about taking snapshots of the web content rendering these and mapping the mouse and keyboard events back to the browser control, but I can't afford the performance penalty and I really don't have time to write and thoroughly test it. I have looked for third party controls, but so far I have only found Chris Cavanagh's WPF Chromium Web Browser control. Which wraps up Awesomium 1.5. Together these are very cool, they play nice with the WPF layouts. But they do not meet my performance requirements. They are VERY HEAVY on memory consumption and not to friendly with CPU usage either. Not to mention still quite buggy. I'll elaborate if you are interested. So, do any of you know of a stable performant WPF web browser control? Thanks.

  Read the article

• Open a URL with parameters using selenium.open()

  - by gagneet

  I am using selenium.open(), to open a URL, which prints the cookie output to the browser window: String cookiestr = "http://my.server.com/cookie?out=text"; selenium.open( cookiestr ); The problem is that, it opens a "Save As..." popup, to save the file named "cookie". When I open the same URL in my browser directly, it displays text in the browser window. I want to capture the body text shown, when I open the URL, but am unable to do so. Is there any other command available which I can use to do this? BufferedWriter outputfile = null; String bodytext = selenium.getBodyText(); System.out.println("Body Text :" + bodytext); Integer I = new Integer(i); filename = "C:\\cookies\\" + I.toString() + ".txt"; outputfile = new BufferedWriter(new FileWriter( filename )); outputfile.write( bodytext ); outputfile.newLine(); i++;

  Read the article

• cookieless sessions with ajax

  - by thezver

  ok, i know you get sick from this subject. me too :( I've been developing a quite "big application" with PHP & kohana framework past 2 years, somewhat-successfully using my framework's authentication mechanism. but within this time, and as the app grown, many concerning state-preservation issues arisen. main problems are that cookie-driven sessions: can't be used for web-service access ( at least it's really not nice to do so.. ) in many cases problematic with mobile access don't allow multiple simultaneous apps on same browser ( can be resolved by hard trickery, but still.. ) requires many configurations and mess to work 100% right, and that's without the --browser issues ( disabled cookies, old browsers bugs & vulnerabilities etc ) many other session flaws stated in this old thread : http://lists.nyphp.org/pipermail/talk/2006-December/020358.html After a really long research, and without any good library/on-hand-solution to feet my needs, i came up with a custom solution to majority of those problems . Basically, i'ts about emulating sessions with ajax calls, with additional security/performance measures: state preserved by interchanging SID(+hash) with client on ajax calls. state data saved in memcache(or equivalent), indexed by SID security achieved by: appending unpredictible hash to SID egenerating hash on each request & validating it validating fingerprint of client on each request ( referrer,os,browser etc) (*)condition: ajax calls are not simultaneous, to prevent race-condition with session token. (hopefully Ext-Direct solves that for me) From the first glance that supposed to be not-less-secure than equivalent cookie-driven implementation, and at the same time it's simple, maintainable, and resolves all the cookies flaws.. But i'm really concerned because i often hear the rule "don't try to implement custom security solutions". I will really appreciate any serious feedback about my method, and any alternatives. also, any tip about how to preserve state on page-refresh without cookies would be great :) but thats small technical prob. Sorry if i overlooked some similar post.. there are billions of them about sessions . Big thanks in advance ( and for reading until here ! ).

  Read the article

• Creating an Ajax.ActionLink that avoids all caching issues

  - by Richard Ev

  I am using an Ajax.ActionLink to display a partial view that shows a settings dialog (the modality of which is arranged using jQuery UI dialog). The issue I am running into is around browser caching. It is important that the user is never shown a cached settings dialog. In an attempt to achieve this I have written the following extension method that has the same method signature as the ActionLink method overload that I am using. /// <summary> /// Defines an AJAX ActionLink that effectively bypasses browser caching issues /// by adding an additional route value that contains a unique (actually DateTime.Now.Ticks) value. /// </summary> public static MvcHtmlString NonCachingActionLink(this AjaxHelper helper, string linkText, string actionName, string controllerName, System.Web.Routing.RouteValueDictionary routeValues, AjaxOptions ajaxOptions) { routeValues.Add("rnd", DateTime.Now.Ticks); return helper.ActionLink(linkText, actionName, controllerName, routeValues, ajaxOptions); } This works well between browser sessions (as the rnd route value gets re-calculated on page load), but not if the user is on the page, makes settings changes, saves them (which is done with another ajax call) and then re-displays the settings dialog. My next step is to look into creating my own ActionLink equivalent that re-calculates a random query string component as part of the onclick JavaScript event handler. Thoughts please.

  Read the article

• HTML inside webView

  - by Samuh

  I am posting some data to a server using DefaultHttpClient class and in the response stream I am getting a HTML file. I save the stream as a string and pass it onto another activity which contains a WebView to render this HTML on the screen: response = httpClient.execute(get); InputStream is = response.getEntity().getContent(); BufferedReader br = new BufferedReader(new InputStreamReader(is,"utf-8")); StringBuffer sb = new StringBuffer(); String line; while((line=br.readLine())!=null){ sb.append(line); sb.append("\n"); } is.close(); Intent intent = new Intent(this,Trial.class); intent.putExtra("trial",sb.toString()); startActivity(intent); Log.i("SB",sb.toString()); In Second Activity, the code to load the WebView reads: WebView browser = ((WebView)findViewById(R.id.trial_web)); browser.getSettings().setJavaScriptEnabled(true); browser.loadData(html,"text/html", "utf-8"); When I run this code, the WebView is not able to render the HTML content properly. It actually shows the HTML string in URL encoded format on the screen. Interestingly, If I copy the Loggers output to HTML file and then load this HTML in my WebView(using webview.loadurl(file:///assets/xyz.html)) everything works fine. I suspect some problem with character encoding. What is going wrong here? Please help. Thanks.

  Read the article

• passing timezone from client (GWT) to server (Joda Time)

  - by Caffeine Coma

  I'm using GWT on the client (browser) and Joda Time on the server. I'd like to perform some DB lookups bounded by the day (i.e. 00:00:00 until 23:59:59) that a request comes in, with the time boundaries based on the user's (i.e. browser) timezone. So I have the GWT code do a new java.util.Date() to get the time of the request, and send that to the server. Then I use Joda Time like so: new DateTime(clientDate).toDateMidnight().toDateTime() The trouble of course is that toDateMidnight(), in the absence of a specified TimeZone, will use the system's (i.e. the server's) TimeZone. I've been trying to find a simple way to pass the TimeZone from the browser to the server without much luck. In GWT I can get the GMT offset with: DateTimeFormat.getFormat("Z").fmt(new Date()) which results in something like "-0400". But Joda Time's DateTimeZone.forID() wants strings formatted like "America/New_York", or an integer argument of hours and minutes. Of course I can parse "-0400" into -4 hours and 0 minutes, but I'm wondering if there is not a more straightforward way of doing this.

  Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >