Search Results

Search found 7931 results on 318 pages for 'hardware rec'.

Page 192/318 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

• Apache port forwarding with ZTE ZXV10 W300 router (provider specific firmware)

  - by dannote

  I'm trying to configure port forwarding for Apache 2.2 installed on Windows XP SP3 with ZTE ZXV10 W300 router. The computer has a static IP 192.168.1.2. Port forwarding is configured as following: Enable true Name Apache Protocol TCP (also tried TCP and UPD) WAN Host Start IP Address empty WAN Host End IP Address empty WAN Connection stream WAN Start Port 8080 WAN End Port 8080 LAN Host IP Address 192.168.1.2 LAN Host Start Port 8080 LAN Host End Port 8080 Port 8080 is open for both TCP and UPD in Windows Brandmauer. Apache configuration: Listen 192.168.1.2:8080 Router Firmware: Hardware Version V1.0.01 Software Version V8.0.02T03_CFA Boot Loader Version V1.1.2 The provider is COMSTAR. I'm not sure but it's said they flash routers with modified firmware. I have also tried to set up Bitcomet port forwarding on port 13514 and failed.

  Read the article

• Ubuntu 10.04 with HD flash

  - by Brad Robertson

  Just noticed that 10.04 is out. My media server has been packed away for a few months but I might dust if off and give 10.04 a shot but I thought I'd see if anyone has any success stories with HD flash in either Chrome or Firefox. I'm currently running Ubuntu 9.10 and it was a large enough pain to get VDPAU working with my Zotac Ion-ITX-C board (eventually found an mplayer PPA that had it compiled in) From reading the 10.04 docs it looks like this is standard now, but I'm wondering about streaming HD, from, say flash or Divx. I've never been able to get HD flash to play without it being extremely choppy, and I chalk this up to the lack of hardware assisted decoding like VDPAU (a guess). My board certainly isn't a competitor in CPU power or memory, which is why i've needed the HW accelerated decoding for HD vids in the past. Just wondering if anyone has had any success stories playing HD vid online (flash, divx or what have you)

  Read the article

• Packet loss with Broadcom wireless and Ubuntu

  - by stevemegson

  I have a machine with Ubuntu 9.04 and a Broadcom BCM4306 wireless card which has been running quite happily for many months with the b43legacy driver that's suggested by Hardware Drivers. Suddenly, I'm now seeing crippling packet loss, varying between 30% and 90% when pinging the router. My WinXP machine is still quite happy even when sat next to the Ubuntu box, so I assume that it's not some new source of interference. What else is likely to have changed? How should I go about diagnosing and fixing this?

  Read the article

• panic! apache2 cannot start due to unable to read error.log !

  - by vvvvvvv

  apache2 fails to start because it cannot open error.log I've checked the syslog, and found something troubling... Jan 20 02:58:18 unassigned sm-mta[3559]: o0FAD04C017861: to=<[email protected]>, delay=4+22:45:18, xdelay=00:06:18, mailer=esmtp, pri=63390823, relay=asdfa$ Jan 20 03:00:01 unassigned /USR/SBIN/CRON[3939]: (root) CMD (if [ -x /usr/bin/vnstat ] && [ `ls /var/lib/vnstat/ | wc -l` -ge 1 ]; then /usr/bin/vnstat -u; f$ Jan 20 03:00:01 unassigned /USR/SBIN/CRON[3944]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jan 20 03:00:01 unassigned /USR/SBIN/CRON[3949]: (www-data) CMD ([ -x /usr/lib/cgi-bin/awstats.pl -a -f /etc/awstats/awstats.conf -a -r /var/log/apache/acces$ Jan 20 03:02:48 unassigned kernel: [371919.642705] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:02:48 unassigned kernel: [371919.642754] ata3.00: BMDMA stat 0x24 Jan 20 03:02:48 unassigned kernel: [371919.642779] ata3.00: cmd 25/00:08:37:59:e2/00:00:42:00:00/e0 tag 0 dma 4096 in Jan 20 03:02:48 unassigned kernel: [371919.642780] res 51/01:00:37:59:e2/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:02:48 unassigned kernel: [371919.642824] ata3.00: status: { DRDY ERR } Jan 20 03:02:48 unassigned kernel: [371919.657647] ata3.00: configured for UDMA/133 Jan 20 03:02:48 unassigned kernel: [371919.657661] ata3: EH complete Jan 20 03:02:50 unassigned kernel: [371921.857580] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:02:50 unassigned kernel: [371921.857620] ata3.00: BMDMA stat 0x24 Jan 20 03:02:50 unassigned kernel: [371921.857645] ata3.00: cmd 25/00:08:37:59:e2/00:00:42:00:00/e0 tag 0 dma 4096 in Jan 20 03:02:50 unassigned kernel: [371921.857646] res 51/01:00:37:59:e2/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:02:50 unassigned kernel: [371921.857688] ata3.00: status: { DRDY ERR } Jan 20 03:02:50 unassigned kernel: [371921.881468] ata3.00: configured for UDMA/133 Jan 20 03:02:54 unassigned kernel: [371921.881479] ata3: EH complete Jan 20 03:02:54 unassigned kernel: [371924.081382] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:02:54 unassigned kernel: [371924.081417] ata3.00: BMDMA stat 0x24 Jan 20 03:02:54 unassigned kernel: [371924.081443] ata3.00: cmd 25/00:08:37:59:e2/00:00:42:00:00/e0 tag 0 dma 4096 in Jan 20 03:02:54 unassigned kernel: [371924.081444] res 51/01:00:37:59:e2/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:02:54 unassigned kernel: [371924.081487] ata3.00: status: { DRDY ERR } Jan 20 03:02:54 unassigned kernel: [371924.105252] ata3.00: configured for UDMA/133 Jan 20 03:02:54 unassigned kernel: [371924.105261] ata3: EH complete Jan 20 03:02:54 unassigned kernel: [371933.656925] sd 2:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) Jan 20 03:02:54 unassigned kernel: [371933.656941] sd 2:0:0:0: [sda] Write Protect is off Jan 20 03:02:54 unassigned kernel: [371933.656944] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jan 20 03:02:54 unassigned kernel: [371933.656956] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 20 03:02:54 unassigned kernel: [371933.656972] sd 2:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) Jan 20 03:02:54 unassigned kernel: [371933.656979] sd 2:0:0:0: [sda] Write Protect is off Jan 20 03:02:54 unassigned kernel: [371933.656982] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jan 20 03:02:54 unassigned kernel: [371933.656993] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 20 03:03:34 unassigned kernel: [371966.060069] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:05:48 unassigned kernel: [371971.776846] ata3.00: BMDMA stat 0x24 Jan 20 03:05:48 unassigned kernel: [371971.776871] ata3.00: cmd 25/00:18:87:10:ee/00:00:42:00:00/e0 tag 0 dma 12288 in Jan 20 03:05:48 unassigned kernel: [371971.776872] res 51/01:00:87:10:ee/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:05:48 unassigned kernel: [371971.776914] ata3.00: status: { DRDY ERR } Jan 20 03:05:48 unassigned kernel: [371971.800668] ata3.00: configured for UDMA/133 Jan 20 03:05:48 unassigned kernel: [371971.800687] ata3: EH complete Jan 20 03:05:48 unassigned kernel: [371974.157850] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:05:48 unassigned kernel: [371974.157885] ata3.00: BMDMA stat 0x24 Jan 20 03:05:48 unassigned kernel: [371974.157911] ata3.00: cmd 25/00:18:87:10:ee/00:00:42:00:00/e0 tag 0 dma 12288 in Jan 20 03:05:48 unassigned kernel: [371974.157912] res 51/01:00:88:10:ee/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:05:48 unassigned kernel: [371974.157956] ata3.00: status: { DRDY ERR } Jan 20 03:05:48 unassigned kernel: [371974.179773] ata3.00: configured for UDMA/133 Jan 20 03:05:48 unassigned kernel: [371974.179786] ata3: EH complete Jan 20 03:05:48 unassigned kernel: [371976.398570] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:05:48 unassigned kernel: [371976.398610] ata3.00: BMDMA stat 0x24 Jan 20 03:05:48 unassigned kernel: [371976.398635] ata3.00: cmd 25/00:18:87:10:ee/00:00:42:00:00/e0 tag 0 dma 12288 in Jan 20 03:05:48 unassigned kernel: [371976.398636] res 51/01:00:88:10:ee/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:05:48 unassigned kernel: [371976.398678] ata3.00: status: { DRDY ERR } Jan 20 03:05:48 unassigned kernel: [371976.423477] ata3.00: configured for UDMA/133 Jan 20 03:05:48 unassigned kernel: [371976.423495] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK Jan 20 03:05:48 unassigned kernel: [371976.423498] sd 2:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] Jan 20 03:05:48 unassigned kernel: [371976.423501] Descriptor sense data with sense descriptors (in hex): Jan 20 03:05:48 unassigned kernel: [371976.423503] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Jan 20 03:05:48 unassigned kernel: [371976.423508] 42 ee 10 88 Jan 20 03:05:48 unassigned kernel: [371976.423510] sd 2:0:0:0: [sda] Add. Sense: Address mark not found for data field Jan 20 03:05:48 unassigned kernel: [371976.423515] end_request: I/O error, dev sda, sector 1122898056 Jan 20 03:05:48 unassigned kernel: [371976.423536] ata3: EH complete Jan 20 03:05:48 unassigned kernel: [371978.630504] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:05:48 unassigned kernel: [371978.630547] ata3.00: BMDMA stat 0x24

  Read the article

• Load balancing and HTTPS strategies

  - by Dan

  I am faced with the following problem: Servers get saturated since current load balancing strategy is based on client IP. Some corporate clients access our servers from behind large proxies so all clients appear with same IP to our load balancer. I think we are using some hardware load balancing device (can investigate further if necessary). We need to maintain session affinity (site is constructed in ASP), so all requests with same IP get routed to the same node. Since all the communication goes over the HTTPS, no request data (like session Id) is available to balancer as a client discriminator. Is there a way to use some other data besides the IP to distinguish between clients and route the clients even when coming from same IP to different nodes? Note: I need to maintain the traffic between the balancer and nodes safe (encrypted).

  Read the article

• Nexenta/OpenSolaris filer kernel panic/crash

  - by ewwhite

  I've an x4540 Sun storage server running NexentaStor Enterprise. It's serving NFS over 10GbE CX4 for several VMWare vSphere hosts. There are 30 virtual machines running. For the past few weeks, I've had random crashes spaced 10-14 days apart. This system used to open OpenSolaris and was stable in that arrangement. The crashes trigger the automated system recovery feature on the hardware, forcing a hard system reset. Here's the output from mdb debugger: panic[cpu5]/thread=ffffff003fefbc60: Deadlock: cycle in blocking chain ffffff003fefb570 genunix:turnstile_block+795 () ffffff003fefb5d0 unix:mutex_vector_enter+261 () ffffff003fefb630 zfs:dbuf_find+5d () ffffff003fefb6c0 zfs:dbuf_hold_impl+59 () ffffff003fefb700 zfs:dbuf_hold+2e () ffffff003fefb780 zfs:dmu_buf_hold+8e () ffffff003fefb820 zfs:zap_lockdir+6d () ffffff003fefb8b0 zfs:zap_update+5b () ffffff003fefb930 zfs:zap_increment+9b () ffffff003fefb9b0 zfs:zap_increment_int+68 () ffffff003fefba10 zfs:do_userquota_update+8a () ffffff003fefba70 zfs:dmu_objset_do_userquota_updates+de () ffffff003fefbaf0 zfs:dsl_pool_sync+112 () ffffff003fefbba0 zfs:spa_sync+37b () ffffff003fefbc40 zfs:txg_sync_thread+247 () ffffff003fefbc50 unix:thread_start+8 () Any ideas what this means?

  Read the article

• Xenserver boot error

  - by Adrian

  I'm trying to get Xenserver 5.5 running on a spare computer here, hardware specs: Intel Q6600, 4GB Ram, and Gigabyte GA-P35-DS3R motherboard Xenserver itself installs fine onto a 150GB sata hdd, however it fails to boot whatsoever, giving this garbled mess: http://img697.imageshack.us/img697/9918/biosi.jpg it's not frozen because if I press enter it just prints a different garble and it also says "could not find kernel image". The strangest thing is if I put that hdd in my desktop and assign it to a VMWare desktop vm (under the ESX profile no less) it boots perfectly... leading me to believe there are no problems with the install or the hdd itself. From what I can tell the error seems to be occuring completely seperately to Xenserver, in the bootloader extlinux?. If there was a motherboard compatibility issue I would think it would also have manifested during installation, and the fact the problem seems to be with the booting into Xen makes me doubt this. Any ideas guys? (I'm using Xen because it can do PCI passthrough without VT-d.)

  Read the article

• Why is this LTO4 Tape-drive not working

  - by Tim Haegele

  # modprobe mptsas # dmesg [ 4274.796796] scsi target7:0:0: mptsas: ioc1: delete device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4274.939579] mptsas 0000:01:00.0: PCI INT A disabled [ 4280.934531] Fusion MPT SAS Host driver 3.04.12 [ 4280.934552] mptsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4280.934692] mptbase: ioc2: Initiating bringup [ 4281.490183] ioc2: LSISAS1064E B3: Capabilities={Initiator} [ 4281.490203] mptsas 0000:01:00.0: setting latency timer to 64 [ 4293.555274] scsi8 : ioc2: LSISAS1064E B3, FwRev=011e0000h, Ports=1, MaxQ=277, IRQ=16 [ 4293.574906] mptsas: ioc2: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4293.576471] scsi 8:0:0:0: Sequential-Access IBM ULTRIUM-HH4 B6W1 PQ: 0 ANSI: 6 [ 4293.578549] st 8:0:0:0: Attached scsi tape st0 [ 4293.578550] st 8:0:0:0: st0: try direct i/o: yes (alignment 512 B) [ 4293.578577] st 8:0:0:0: Attached scsi generic sg5 type 1 # mt -f /dev/st0 status mt -f /dev/st0 status mt: /dev/st0: rmtopen failed: Input/output error # dd if=/dev/zero of=/dev/nst0 bs=1024 count=10 dd: opening `/dev/nst0': Input/output error I am running debian squeeze 2.6.32-5-amd64 #1 SMP Sun May 6 04:00:17 UTC 2012 x86_64 GNU/Linux Server is Fujitsu TX140 with Controller Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS Tape+Hardware is new.

  Read the article

• Primary domain controller has crashed, secondary does not log in

  - by Hosm

  Hi everybody, I had a primary domain controller on machine A and a secondary one on machine B in my AD domain. Due to some hardware/software problems, I decided to migrate the role of primary domain controller to machine B. Unfortunately, machine A has totally crashed and does not boot. Now I can not even log in to machine B (which itself was a controller in the domain). I need to log into machine B then choose it as the primary controller. I already have synced DNS and AD info. when machine A was alive. Anyone can provide an idea?

  Read the article

• QoS / PBR Routing Questions

  - by Bernard

  I have a 50Mbs Satellite link and a 10Mbs Microwave link supplying a very remote location. Behind these links, I have a 6,400 seat network - with about 3,000 signed in at any one time. My goal is to send all of the Voip traffic (Google Chat, Magic Jack, Skype, Speakeasy, Vonage, Vonage PC, Yahoo) through the microwave link which has 100ms latency. The rest of the traffic can utilize any remaining bandwidth of the microwave link with excess being diverted to the higher latency (600ms) satellite connection. The problem I've had so far is that most automatic routing configurations weigh the bandwidth heavily for preference - and I'm only wanting latency considered. Additionally, I don't know if this can even be handled with the routing hardware I have at my disposal (Cisco 3640, 3745, & 3845). Any recommendations (or really good starting points) would be greatly appreciated.

  Read the article

• Installing Windows Server 2003 on AMD environment

  - by santhosh kumar

  Hi all, Our organisation we have 25 computers and we are trying to setup Windows Server 2003. We are planning to configure Active Directory NAT DNS server Visual Studio Team Foundation Server Subversion (SVN) Trac (Bug tracking tool) FTP server And our Hardware configuration is AMD Athlon 64 X2 Dual (Core processor 5600+, 2.60 GHz) Asus motherboard (M2N series) Transcend 4 GB RAM (800 MHz) 500 GB Hard Disk (RAID enabled) But my colleague is advising me AMD won't suite for servers platforms, and use Intel environment. Also they telling we can't install all the services to one server. I got confusion what to do?... Is really can`t install above services to AMD computer? Thanks...

  Read the article

• Horizontal scrolling not working in Windows 7 running on MBP using Boot Camp

  - by Rubicon

  Is there a way to enable horizontal scrolling on Windows installed on a bootcamp partition of MBP 13" Core 2 Duo, using a trackpad? I had a look into the Boot Camp Control panel settings, but could not find a setting that suggested this. I used the Boot Camp drivers that came with the MBP in the Mac OS X Install disk. The vertical scroll is working fine, and the horizontal scroll works fine in the Mac world of things, so the hardware is fine. I think maybe there might be an additional install for a driver that we may have to install? Or any update? Thanks in advance for all your help. :)

  Read the article

• Patch Management and System Inventory on a Windows network?

  - by Scott

  What are some good ways to have patch management and systems/hardware inventory for a Windows (Server 2003 or 2008) network? For example, at a minimum knowing the basics for all the machines out on the network such as OS version, patch level, what hotfixes they have, processor, ram, etc. Even better would be knowing more details such as peripherals. Ideally if there were a way to push service packs, and hotfixes (and other software?) to the machines, that would be great. What are some options for this?

  Read the article

• I'm confuse about these 2 statements about performance of 32 bit application on 64 bit Windows 7....

  - by metal gear solid

  Running some 32 bit applications on a 64 bit OS could actually be slower. The additional overheads in running 32 bit software in 64 bit mode could cause a slight degradation in performance. It will take some time for 64 bit software to become the norm. Source: http://www.w7forums.com/windows-7-64-bit-vs-32-bit-t484.html That depends. If you're working with large files or running applications that consume a great deal of memory, then 64-bit Windows will typically give you a slight performance advantage over 32-bit Windows running on identical hardware. This is true even when using 32-bit applications. Source: http://www.infoworld.com/d/windows/32-bit-windows-7-or-64-bit-windows-7-145?page=0,3 Which is true? If i go for 64 bit Windows 7 then will i feel more performance (Compare to 32 bit windows 7) of 3 years back purchased Adobe photoshop (I think it would be a 32 bit application) and some of other 32 bit applications ?

  Read the article

• Server Security

  - by mahatmanich

  I want to run my own root server (directly accessible from the web without a hardware firewall) with debian lenny, apache2, php5, mysql, postfix MTA, sftp (based on ssh) and maybe dns server. What measures/software would you recomend, and why, to secure this server down and minimalize the attack vector? Webapplications aside ... This is what I have so far: iptables (for gen. packet filtering) fail2ban (brute force attack defense) ssh (chang default, port disable root access) modsecurity - is really clumsy and a pain (any alternative here?) ?Sudo why should I use it? what is the advantage to normal user handling thinking about greensql for mysql www.greensql.net is tripwire worth looking at? snort? What am I missing? What is hot and what is not? Best practices? I like "KISS" - Keep it simple secure, I know it would be nice! Thanks in advance ...

  Read the article

• Cross platform support for network attached USB hubs?

  - by larsks

  I am looking at network-attached USB hubs in order to run licensed software in a virtualized environment when hardware dongles are required. Are there any solutions that will work with both Linux and Windows? Most of the dedicated devices -- such as the Zonet ZUH2214 or the (oddly expensive) Digi AnywherUSB/2 -- appear to be Windows-only. Linux has the the USB/IP project, for which there appear to be Windows drivers, but the last "News" post on the site was in 2007, so I'm not entirely confident about the viability of the project. Has anyone out there found a solution that will work well in both environments?

  Read the article

• Wireshark (WinPCap) does not see Intel X520-DA2 10 GbE NIC teaming intermittently

  - by GregC

  I am running a team of two 10 GigE ports on Intel X520-DA2 network card. They work well in tandem and achieve the desired throughput. However, I see an intermittent issue whereby WireShark and my own application (using WinPCap) only show the underlying ports, failing to recognize the team adapter. Details: Intel 17.4 NIC drivers on Windows Server 2008 R2 with all patches. HP DL370 G6 server. RSS enabled on Intel both underlying Intel NICs. The exact error: Unable to open the adapter (rpcap://\Device\NPF_{401D5903-16E7-41DC-8484-5D96765B9692}). failed to set hardware filter to promiscuous mode

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS storage solutions. In addition, what effect does battery-backed write cache (BBWC) have in ZFS storage?

  Read the article

• AutoCAD 11 and network file shares

  - by gravyface

  Small network of perhaps half a dozen engineers, currently working on local copies of AutoCAD project files, which are then copied back up to file server (2008 Standard, 1-2 year old Dell server hardware, RAID 5 SAS disks (10k? not positive)) at end of day. To me, this sounds horribly inefficient and error-prone, however, I've been told that "AutoCAD and network files = bad idea" and this is gospel. The network is currently 10/100 (perhaps this is the reason for the "gospel") but all the workstations are within 2 years old and have GbE NICs so an upgrade of the core switch is long overdue. However, I know certain applications don't like network access, at all, and any sign of latency or disruption brings the whole thing crashing down. Anyone care to chime in?

  Read the article

• Backup strategy for Windows Server 2008 R2 and Hyper-V

  - by winserveradmin

  I am in the process of planning a Hyper-V deployment with SCVMM 2008 R2. I have several VMs on VMWare Player (temporary solution) for stuff like Sharepoint 2007, 2010, and a couple of other server apps. I want to develop a resilient backup plan for this. On the software side, Data Protection Manager 2010 will support all of the server apps I run (sQL Server 2008 R2, Sharepoint, Exchange, etc). But on the hardware side (storage), what is the best way to go? Drobo seems to have issues with Hyper-V juding by a few threads on here and doesn't support DPM 2010 (which is in beta anyway) but not even the 2007 version (see http://www.drobo.com/support/best_practices.php). What storage device would work well? Do I need a home server or just an external usb drive? Capacity wise, 2tb will probably be best so I can have a small archive and implement a round-robin system. Thanks

  Read the article

• Home ZFS based NAS...What processor/chipset to use?

  - by MrBlargityBlarg

  So, I'm building a home/personal NAS. My plan is to expose both SMB fileshares for sharing files/media between hosts, but also to carve an iSCSI target LUN out of it for use by VMWare as a datastore. I want to use ZFS (software RAID) so that means I'll either be using FreeNAS, Solaris Express, or OpenIndiana. My question is basically: How much horsepower do I need? Obviously I/O is going to be my bottleneck but I want to be sure that I am not limiting my I/O because of a slow processor or chipset. So far the hardware plan is to use an Intel i3 and motherboard with one of the H87, Q87, or Z87 chipsets, a SAS controller (JBOD, no RAID) and if budget allows, I'm also hoping to get an SSD for the ZFS L2ARC and ZIL. Does anyone think I could get away with an Intel Atom or cheaper/less-capable processor/chipset than the i3 and [HQZ]87 listed above?

  Read the article

• Load-balancer options

  - by toolkit

  I am looking at a number of possible options for load-balancing. So far, I am constrained to the following options: DNS server load-balancer, balancing to a cluster of tomcat servers, with terracotta for session replication. Pros - don't have to buy new kit. Cons - DNS lb can keep directing to a broken server. Hardware load-balancer, direct to cluster of tomcat servers. Pros - could have second box for failover lb. Cons - expense. Apache server load-balancer. Pros - apache's lb polls for broken servers. Cons - apache server is single point of failure, plus need to buy another server. Are there any other options I should consider? Thanks. Update: Thanks for all the answers so far +1's all round. Not accepting an answer yet, to keep more ideas coming.

  Read the article

• WD My Passport Essential SmartWare External Hard Drive

  - by Acer

  Hi Ive been gifted a My Passport SmartWare External Hard Drive(500gb). I used it and it works fine and installed WDSmartWare The Second time i used it,still fine,but I took it out without using the "Safely Remove Hardware" So the third time I used it,there's a bubble come out that says: USB Device Not Recognized One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.For assistance in solving the problem, click this message. I tried connecting it to other USB Ports but it didn't work I tried Uninstalling WDSmarWare and connect it but it didn't work Please help me I like this hard drive so much and I spoilt it easily XD P.S I think about 13% has been used up in the Hard Drive P.S.S Other USBs can work fine in the computer P.S.S.S I tried connecting it to other computer and works fine OMG

  Read the article

• Inexpensive and Open replacement for Cisco Tunnel-based EasyVPN with Cisco VPN 3000 Series

  - by Shoaibi

  I have a scenario when i have to establish peer-to-peer preshared key based VPN to a vendor. This vendor uses Cisco EasyVPN with Cisco VPN 3000 as access concentrator. I check the compatibility of the type of VPN from http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps7180/prod_brochure0900aecd80582078.pdf and it appears that it would only work on cisco hardware. I am looking for a less inexpensive and possibly and open replacement to this to save my cost and also recommend to them. I have tried OpenVPN and thinking about vyatta.

  Read the article

• Connecting to Aerohive APs from Laptops running Win. 7 using authentication from a Windows 2008 domain server

  - by user264116

  I have deployed a wireless network using Aerohive access points. 2 of them are set up as radius servers. I want my users to be able to use the same user name and password they use when they log onto our domain. They are able to do this from android devices or computers running Windows 8. It will not work on Windows 7 machines. How do I remedy this situation, keeping in mind that the machines are personal machines not company owned and I will have no way to change their hardware or software.

  Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >