Search Results

Search found 9758 results on 391 pages for 'wireless networking'.

Page 192/391 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

  • Servers behind load balancer

    - by Tom
    We have a CISCO hardware load balancer with two web servers behind it. We'd like to force some URLs to only be served by one of the machines. Firstly, is the job of the load balancer? or would a better approach be create a subdomain such as http://assets.example.com which would be automatically be routed to one of the servers?

    Read the article

  • Cannot connect to network

    - by dany
    I have a problem: I am on Debian. I configured my nic with a static ip (192.168.1.56). When I try to connect to a network, initially with ifconfig eth2 I get (correctly): eth2 inet addr:192.168.1.56 .... inet6 addr: fe80:221:ff:fe96:4598/64 but after a few seconds the 192.168.1.56 disappears and after some other seconds disappears the inet6 address too. When I press in the nm-applet it requires me the password but in the meantime it try to connect. At uni, the connection is a DHCP one. It works for the first few seconds but after it doesn't. Any possible solution? Here it is the relevant part of the syslog: (static ip configuration) http://pastebin.com/u3BPAsda

    Read the article

  • Public DNS Server fails on Windows Amazon EC2

    - by Adroidist
    I have started a new Windows server instance on Amazon EC2. The security group has the following rules: Ports Protocol Source 22 tcp 0.0.0.0/0 80 tcp 0.0.0.0/0 443 tcp 0.0.0.0/0 3389 tcp 0.0.0.0/0 53 udp 0.0.0.0/0 -1 icmp 0.0.0.0/0 I am able to ping the public DNS server of the machine and i can connect to it using Windows Remote Desktop connection. However, when i put in my web browser the public DNS server, it fails to connect. Morever, I used filezilla and putty (and in both I loaded the private key .pem) but i receive connection timed out. I disabled the firewall on both my pc and the instance (which I entered using Remote desktop connection). Can you please tell me what I am missing?

    Read the article

  • How to host many websites using same public IP address but different domains.

    - by Roberto Sebestyen
    I know how to configure one IIS instance to run many websites using the same public ip address, but different domain names (As long as I have control over the domains). But how can you configure many IIS servers running on different virtual machines in the same network, to host websites using the same public IP addres, but different domain names? Normailly in IIS under the website you can set the headers to which the website will respond to. but what if that website is on a different machine?

    Read the article

  • routing traffic between two network cards through firewall

    - by RubyFreak
    I'm trying to test a network device (firewall) using a Linux box, with two network cards, one interface connected to the WAN zone and another interface to LAN zone. The configuration is similar with that |ETH0| <-> | FW | <-> ETH1 So from both interfaces I'm able to ping the respective firewall interface. But i'm not able to fire something like: ping -I eth0 ip.from.eth1 and to get any answer. Is that possible or should the linux network namespace solution or user level tcp stacks (VMs are out of question)

    Read the article

  • Latency in TCP/IP-over-Ethernet networks

    - by aix
    What resources (books, Web pages etc) exist out there that: explain the causes of latency in TCP/IP-over-Ethernet networks; mention tools for looking out for things that cause latency (e.g. certain entries in netstat -s); suggest ways to tweak the Linux TCP stack to reduce TCP latency (Nagle, socket buffers etc). The closest I am aware of is this document, but it's rather brief. Alternatively, you're welcome to answer the above questions directly.

    Read the article

  • CentOS 6.3 Virtual under OpenVZ cannot ping, host lookups, outbound connections while postfix running

    - by Paul Cravey
    My best theory is that some kernel limit is being hit preventing outbound connections. We have tried basically everything from tcpdumps to provisioning an entirely new virtual server (we do not have this problem on any other virtuals), however the problem somehow carried over, even with new postfix build (working). Emails work, and outbound connections work, so long as postfix does not have too much going on. /proc/user_beancounters shows no limits being hit (show below). Nevertheless, pings fail even to IP addresses. TCP stack appears healthy. Load is low. No iowait. Flushed iptables already. Has anyone experienced anything like this? uid resource held maxheld barrier limit failcnt 3: kmemsize 166216365 170262528 9223372036854775807 9223372036854775807 0 lockedpages 0 0 9223372036854775807 9223372036854775807 0 privvmpages 285727 351885 9223372036854775807 9223372036854775807 0 shmpages 16933 17605 9223372036854775807 9223372036854775807 0 dummy 0 0 0 0 0 numproc 150 303 9223372036854775807 9223372036854775807 0 physpages 314156 326191 0 1280000 0 vmguarpages 0 0 9223372036854775807 9223372036854775807 0 oomguarpages 165355 165355 9223372036854775807 9223372036854775807 0 numtcpsock 89 172 9223372036854775807 9223372036854775807 0 numflock 22 76 9223372036854775807 9223372036854775807 0 numpty 1 2 9223372036854775807 9223372036854775807 0 numsiginfo 0 75 9223372036854775807 9223372036854775807 0 tcpsndbuf 2733472 4371752 9223372036854775807 9223372036854775807 0 tcprcvbuf 1798336 5427296 9223372036854775807 9223372036854775807 0 othersockbuf 491120 1000760 9223372036854775807 9223372036854775807 0 dgramrcvbuf 0 238728 9223372036854775807 9223372036854775807 0 numothersock 361 505 9223372036854775807 9223372036854775807 0 dcachesize 135941831 136114679 9223372036854775807 9223372036854775807 0 numfile 2905 4990 9223372036854775807 9223372036854775807 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 numiptent 8 9 9223372036854775807 9223372036854775807 0 [root@bni /]# ping 4.2.2.1 PING 4.2.2.1 (4.2.2.1) 56(84) bytes of data. --- 4.2.2.1 ping statistics --- 9 packets transmitted, 0 received, 100% packet loss, time 8493ms [root@bni /]# service postfix stop [root@bni /]# ping 4.2.2.1 PING 4.2.2.1 (4.2.2.1) 56(84) bytes of data. 64 bytes from 4.2.2.1: icmp_seq=1 ttl=53 time=8.63 ms 64 bytes from 4.2.2.1: icmp_seq=2 ttl=53 time=8.62 ms 64 bytes from 4.2.2.1: icmp_seq=3 ttl=53 time=8.63 ms 64 bytes from 4.2.2.1: icmp_seq=4 ttl=53 time=8.66 ms Outbound connections of all sorts fail when postfix is running.

    Read the article

  • How can I restrict SSH access when the source IP is dynamic

    - by Supratik
    Hi I want to protect SSH access to our live web server from all IP's except our office static IP. There are some employees who connects to this live server from their dynamic IP's. So, it is not always possible for me to change in the iptables rule in live server whenever the dynamic IP of the employee changes. I tried to put them in office VPN and allowed only SSH access from office IP but the office connection is slow in compared to our employee's private internet connection, moreover it adds an extra overhead to our office network. Is there any way I can solve this problem ?

    Read the article

  • How can I configure multiple default gateways on a CISCO Router?

    - by Spirit
    Does any one knows a way to configure a cisco router with multiple gateways - multiple gateways of last resort? I've tried adding a gateway of last resort twice (with different metric) but only one is shown: Router(config)# ip route 0.0.0.0 0.0.0.0 2.2.2.2 10 Router(config)# ip route 0.0.0.0 0.0.0.0 3.3.3.3 100 And the show ip route output was: Router# show ip route Gateway of last resort is 2.2.2.2 to network 0.0.0.0 2.0.0.0/24 is subnetted, 1 subnets C 2.2.2.0 is directly connected, FastEthernet0/0 3.0.0.0/24 is subnetted, 1 subnets C 3.3.3.0 is directly connected, FastEthernet0/1 32.0.0.0/30 is subnetted, 1 subnets C 32.2.2.0 is directly connected, Serial0/2/0 S* 0.0.0.0/0 [10/0] via 2.2.2.2 The point is that i cannot see the other route with higher distance metric? Anyone has a sugestion? I mean will this config work if the link on 2.2.2.2 fails? Will the router choose the other network 3.3.3.3, if the link 2.2.2.2 fails?

    Read the article

  • Reserve internet connection.

    - by amouniverso
    I have the router D-link 804HV that have 20mbit\s internet via PPoE tunnel . It connect three PC with Windows Xp to my home net. One of three my PC have reserve stability wi-fi internet connection. How can I use the wi-fi connection as reserve if the router connection is not available? I try to set the Wi-fi PC as gate for the other two, but it's not working.

    Read the article

  • Help me to set samba and apache on my Ubuntu VM from Vista, starting from ping

    - by avastreg
    Ok the title is not so clear after all, so let's start with the problem description posting some points: i'm on Win Vista i have a Virtual Box Ubuntu 9.04 server (Virtual Machine) installed in windows i'm under Active Directory (maybe helps), with network 192.168.2.x After Ubuntu installation (LAMP), i have: Ubuntu Ip set to 10.0.2.15 (dhcp) Vista pings Ubuntu and Ubuntu pings Vista (only IPs, not names) Can't connect to Apache (default install ubuntu server) at the url h**p://10.0.2.15/ On Ubuntu, testing Apache by doing 'wget http://10.0.2.15/' works Tried to setup samba, writing a share def, but nothing, i can't access from Vista to Ubuntu My scope is: Setting up samba to work on files from windows Reaching apache to test web pages Ok i'm not completely noob (but i'm on the noob way anyway) and i've tried many solutions, so please try to help me; let's look together what went wrong :)

    Read the article

  • Remote Desktop fails after VPN connection.

    - by Samet Sorgut
    The remote computer is connected with Remote Desktop. When the remote computer is connected to VPN the Remote Destop freezes. It is not possible to connect to the remote computer again via Remote Desktop. What can be done to connect to this remote computer after it establishes a VPN connection? The only thing that comes to my mind is to install a second NIC and configure Remote Desktop to accept connection from this NIC while VPN is working from the other... What do you suggest?

    Read the article

  • linksys wap54g default wpa wireless key?

    - by jack
    Hi I wrongly pressed the push button in linksys wap54g web administration. Then it restarted and stated that it's protected with WPA while I first configured it as WEP. So, my old key didn't work. What should I do? Plugin with wire cable to reconfigure it? - which is the only way? coz it was embedded in ceiling. I found no solutions in product manual and google. Thank you.

    Read the article

  • Is it possible to change an "Unidentified Network" into a "Home" or "Work" network on Windows 7

    - by Rhys
    I have a problem with Windows 7 RC (7100). I frequently use a crossover network cable on WinXP with static IP addresses to connect to various industrial devices (e.g. robots, pumps, valves or even other Windows PCs) that have Ethernet network ports. When I do this on Windows 7, the network connection is classed as an "Unidentified Network" in Networks and Sharing Center and the public firewall profile is enforced by Windows. I do not want to change the public profile and would prefer to use the Home or Work profile instead. For other networks like Home and Work I'm able to click on them and change the classification. This is not available for unidentified networks. My questions are these:- Is there a way to manual override the "Unidentified Network" classification? What tests are performed on the network that fail, therefore classifying it as an "Unidentified Network" By googling (hitting mainly vista issues) it seems that you need to ensure that the default gateway is not 0.0.0.0. I've done this. I've also tried to remove IPv6 but this does not seem possible on Windows 7.

    Read the article

  • Combine multiple DNS filtering result

    - by Martheen Cahya Paulo
    Several DNS servers provide filtering against different categories, mostly for the local government 'undesirable content', some for malware, and some for ads. What I want is to create/use a DNS server that compare against those filtering DNS servers and only provide the address if all the DNS server agrees. For example if DNS server G provide a clean, unfiltered result, DNS server N provide malware and/or pornography filter, and DNS server F provide ad filter, then G, N and F will only provide the same/similar answer if the query is not categorized as malware, pornography, or advertising. Thus, by creating a server M that only answer if all DNS server agree, M effectively filter against all those categories. Maybe it's possible to do this on DDWRT or Tomato, but if not, I would settle for a solution that can be run in Linux/Windows.

    Read the article

  • Not getting gigbit from a gigabit link?

    - by marcusw
    I just upgraded my LAN to gigabit. This is what netperf has to say about things. Before: marcus@lt:~$ netperf -H 192.168.1.1 TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.1 (192.168.1.1) port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.02 94.13 After: marcus@lt:~$ netperf -H 192.168.1.1 TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.1 (192.168.1.1) port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.01 339.15 Only 340 Mbps? What's up with that? Background info: I'm connecting through a gigabit switch to a sheevaplug. I have Cat5e wiring in the walls and the run is maybe 30 feet. If you're not familiar with netperf, it has a tendency to give very stable results and never lie.

    Read the article

  • syslog ip ranges to specific files using `rsyslog`

    - by Mike Pennington
    I have many Cisco / JunOS routers and switches that send logs to my Debian server, which uses rsyslogd. How can I configure rsyslogd to send these router / switch logs to a specific file, based on their source IP address? I do not want to pollute general system logs with these entries. For instance: all routers in Chicago (source ip block: 172.17.25.0/24) to only log to /var/log/net/chicago. all routers in Dallas (source ip block 172.17.27.0/24) to only log to /var/log/net/dallas. Finally, these logs should be rotated daily for up to 30 days and compressed. NOTE: I am answering my own question

    Read the article

  • How to enable remote desktop view in windows 7 ?

    - by Ravi shankar
    Hi, I am trying to connect to a tight VNC server for remote desktop view. Its working fine when VNC server is running in XP PC but I am not able to connect remotly when VNC server is running in windows 7 PC. I am also able to connect to localhost in windows 7. I have turn off windows fire wall and other anti virus.

    Read the article

  • On VMWare Server, how can I specify which Ethernet port should be the one to be bridged?

    - by DrDavid
    My server has 4 ethernet ports; 1 uses a APIPA address to connect to a DroboElite (that's how they're designed to work), 1 is connected to the LAN, and the other two are unused currently. The issue is that VMWare Server seems to have an affinity to the port that's connected to the Drobo, which means that it can never reach the internet. If I disable the Drobo port, everything works just fine. If I enable the drobo port, nothing works (well, the drobo works, but the virtual machine doesn't ;) ) How can I tell VMWare Server to NOT use the drobo port when I'm bridging the connection?

    Read the article

  • How can I set up port forwarding for SQL Server 2005?

    - by Manish
    Hello Subject :how to use port forwarding Internet------> Router in my network ------->LocalMachine (Windows 2003) -->Sqlserver2005 How can I access SQL Server through the internet via a router in the local network? My router IP Address is =192.168.1.86; My local machine which is connected to the router Ip Address is= 192.168.1.81 At port No=1433 tell me how to use port forwarding Thanks for help in advance

    Read the article

  • Snow Leopard and a Windows network

    - by JohnE
    I have just added a MBP to my home network and while I can connect to the internet etc, i cannot browse my home networked computers. I have already added a new location in my Network preferences yet when I goto the WINS tab, there is no dropdown to select my workgroup so i manually enter it. From what I have read, once I go to the finder and open the network, i should see the workgroup and systems...yet i do not. Any suggestions? Thanks.

    Read the article

  • How to determine most stable Cisco IOS release?

    - by Chris J
    This post is about a Catalyst 4948E switch. I was looking on the download page and realized that there are no "GD" versions available. Are the "ED" versions stable? Even if you change "ED" to "GD" in the URL the IOS images are still the same. http://www.cisco.com/cisco/software/release.html?mdfid=283027810&flowid=3592&softwareid=280805680&release=15.1.1-SG2&relind=AVAILABLE&rellifecycle=ED&reltype=latest Is 15.1 as reliable as 15.0? My devices are currently on the 12.2 train. Is there anything special to upgrade to one of the 15.x trains? Are the configurations compatible.

    Read the article

  • Disable dhcp client over one interface

    - by Lopoc
    Hi to all I'm encountering a problem on a sever with two ethernet interfaces(etho and eth1), it runs linux-ubuntu-server. I need eth1 not make any dhcp request, becouse I need it to be only a listening interface, obviusly I need eth0 running normally. So how can i disable any dhcpclient ation over eth1? thank in advance.

    Read the article

  • Ping: Destination Host Unreachable, from the destination host itself

    - by phunehehe
    I have a server that responds in a weird way to ping: $ ping hostname.com PING hostname.com (<IP address>) 56(84) bytes of data. From hostname.com (<IP address>) icmp_seq=1 Destination Host Unreachable From hostname.com (<IP address>) icmp_seq=2 Destination Host Unreachable From hostname.com (<IP address>) icmp_seq=3 Destination Host Unreachable From hostname.com (<IP address>) icmp_seq=4 Destination Host Unreachable I'm confused, as the messages come from the server that I want to ping, and at the same time it's saying Destination Host (itself) Unreachable. Pinging by IP address yields the same result. The server is online and operating normally. What could be the cause?

    Read the article

  • will heavy network traffic affect other connections on HP ProCurve V1810-48G?

    - by nn4l
    I have a HP ProCurve V1810-48G switch with a few servers connected to it (everything in one rack). The switch is practically in its default configuration. During copying of a few hundred GByte of data from server_a to server_b (using tar cf - data | ssh server_b 'cd myhome; tar xf -'), essentially saturating the network capacity between those two servers, I noticed network related error messages on the console of server_c - as if server_c is no longer able to send/receive traffic to server_d. After canceling the copy command everything was normal again. I would understand this if the network connection would use a shared resource, for example if server_a and server_c are in one datacenter, server_b and server_d are in another datacenter and both datacenters are connected with a 100 MBit line. But all of the mentioned servers are connected to the same switch and are located in the same IP network. I always thought that a connection between two servers on one switch will not affect any other server connected to the switch. It is also possible that the network related error messages are caused by something else - but I can't risk a network problem for any other system on this switch. Please advise.

    Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >