Search Results

Search found 5670 results on 227 pages for 'zend router'.

Page 193/227 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

• rsync generates very much traffic

  - by user109459

  I use rsync for backing up one of my servers with 4GB of files. When I now try to transfer these files the traffic for the files isn't the estimated 4GB. It is a lot higher. It's about 60GB. I also checked the traffic on my server, backup server and router and all three say that there was a traffic of 60GB. But at the end rsync says that it only has transfered 4GB. Another problem is that I can't debugg it because the problem occures randomly.

  Read the article

• Computer connects to lan, but not the internet

  - by Jay

  I have a computer with Vista Home that can connect to the router, but it cannot get on the internet. I cannot ping google.com, the request times out. I've tried this on two separate networks and have no trouble with other computers connecting. I've renewed ipconfig, reset winsock, updated the wireless adapter, and the hosts file looks fine. I've tried disabling the firewall as well as a direct wired connection. I did a scan with Norton and it didn't find anything. Is there anything else I can try before resorting to a system restore? Update (Copied from Answer) Windows Update was able to find updates and install them (though, they could have already been downloaded previously). When I pinged Google by using their IP 66.102.9.103, it said it lost 25 percent of the packets. I successfully flushed the DNS but it didn't help. Also, I found safe mode with networking works fine.

  Read the article

• Is it possible to use the same MAC address for an entire subnet?

  - by Bruce

  I wish to add static entries to the ARP table of my machine so that it uses a dummy MAC 00:11:22:33:44:55 for any IP address within the subnet 10.0.0.0/8 Using arp -s 10.0.0.0/8 00:11:22:33:44:55 does not work. What can I do? PS - I know it might sound strange why anyone would want to do this but kindly bear with me here. EDIT: I am using this so that the hosts do not send a broadcast ARP message. I route the packets to the appropriate last hop router which changes the dst MAC from the fake MAC to the MAC of the dst IP address. I can get everything working except I have to manually enter the fake MAC for each subnet IP address.

  Read the article

• How can I use my Windows 7 computer to share WiFi connection with PCs that don't have wireless?

  - by Tom Auger

  Long story short: modem and wireless router are downstairs and we're having a LAN party where some visitors don't have wireless. There's no way to run the length of cabling required, so looking for options. My Windows 7 Home Premium PC has a wireless-n connection, and I'd like to see if I can use it as a "hub" or switch of sorts, running an ethernet cable out of the back and into a switch, then splitting off to the other PCs. Is this an option? I know with Internet sharing, you can set up your PC as a wireless access point, but I want to do the opposite.

  Read the article

• Need help configuring NAT

  - by QuinnFTW

  First of all, the router I am using is a Cisco WRVS4400N. My company runs a software which handles the MySQL database of all of their products. The software now has an e-commerce module, so I have to set up a secure tunnel from our network to the server that will be hosting our e-commerce site so that when the database is updated, the site will also be updated. The technician completeing the job said there is an IP conflict, and has asked me to NAT 192.168.0.0/24 to 192.168.115.0/24. I am not really sure how to do this, and they want to charge $150 an hour to do it for me. Can anyone help?

  Read the article

• Access server by hostname without domain

  - by projectshave

  I want to access services on other machines on my home network with just their hostname. In every browser, "http://machine" fails, but adding a period in "http://machine./" works. Is there a way to avoid adding that extra period? My setup is a router with DD-WRT w/ DNSmasq turned on, Win7 machines and several Ubuntu VMs. nslookup works fine with just hostname. Remote desktop works, but TightVNC needs the extra period. ssh needs the period. As I said, all my browsers need the extra period. I'd prefer a solution that doesn't require manually maintaining the hosts file. Thanks.

  Read the article

• How can I monitor network traffic in an all Mac home network?

  - by raiglstorfer

  I have an all Mac network consisting of an Airport Extreme, 1 MacPro, 1 Mac Mini, 2 MackBook Pros, 2 iPads, and 2 iPhones. The Mac Pro is connected directly to the Airport Extreme via Cat5 and the rest is all running via Wireless. Lately I've been getting prompted by Google to enter Capchas frequently. The message states that I might have software running on my network I'm not aware of. My wireless router is password protected using WPA2 Personal and I frequently change my password so I don't think someone is using the network from outside (but I've no way to confirm this). I'm looking for a relatively cheap (preferably open source) solution that would enable me to monitor and profile the network usage by machine and port. Can someone recommend a solution?

  Read the article

• Windows xp media center, iTunes, Home sharing problem with app Remote and Apple tv2

  - by Amador

  Hello everybody, greetings from Mexico, sorry about my english but here it goes: I recently bought and apple tv 2nd generation it works just fine, i can see you tube videos but i cant see my library. My pc is conected to the same wi-fi than my apple tv. I have the latest software. I have my firewall off. I turned off and on my router. Search for iphone, ipad remotes on, sharing my library on my local network on, in itunes. Ive checked that my id was the same. On top of that the Remote app doesnt seem to work either. Please help, im kinda loosing my mind over this

  Read the article

• How does a frame retrieve the recipient's MAC address?

  - by Sarmen B.

  I am studying a Network+ book named All-in-one CompTia Network+ by Mike Meyers. In chapter 2 he talks about frames and how he represents them as canisters and the data within the frame contains the recipients mac address, senders mac address, data, and sequence number. What I don't understand is if the sender is sending a file via the network to the recipient, and this frame contains this data, how does the frame know what the recipients MAC address is before sending it? In regards to TCP/IP when it contains the recipients IP address, that's understandable how it retrieves that value. But I don't understand how it can retrieve the MAC address, because if that frame comes from the senders computer, goes into the router and copies itself to each and every computer that exists on the network, how did it have the MAC address to know where to go? Let me know if I'm not making sense.

  Read the article

• How can I monitor network traffic in an all Mac home network?

  - by raiglstorfer

  I have an all Mac network consisting of an Airport Extreme, 1 MacPro, 1 Mac Mini, 2 MackBook Pros, 2 iPads, and 2 iPhones. The Mac Pro is connected directly to the Airport Extreme via Cat5 and the rest is all running via Wireless. Lately I've been getting prompted by Google to enter Capchas frequently. The message states that I might have software running on my network I'm not aware of. My wireless router is password protected using WPA2 Personal and I frequently change my password so I don't think someone is using the network from outside (but I've no way to confirm this). I'm looking for a relatively cheap (preferably open source) solution that would enable me to monitor and profile the network usage by machine and port. Can someone recommend a solution?

  Read the article

• How does everyone set up AWS for PHP with a git workflow while worrying about distributing EC2?

  - by Parris

  Hello, I have been looking for something like heroku but for php, and after much frustration (and almost finding what I need, but not quite) we decided to just go with AWS without any other abstraction. We are using PHP 5.3 (and CakePHP 1.3), and are currently using git. Ubuntu seems like the easiest way to get both of those on there and we will most likely use that. We aren't really going worry about outgoing email. We are using smtp through gmail, but will most likely switch to some other service eventually. I had 3 questions: 1) I have been looking at Zend Server, and I am not quite sure how that is more beneficial than xampp. Perhaps it is not? 2) I suppose to make the application scale we would need multiple instances of some ec2 ami. Then just duplicate it and such. The question then becomes how do we make sure all EC2 instances are up to date? 3) I understand the concept of load balancing to some degree. I understand that in 1 region you select a bunch of servers and have it load balance across them. The question then becomes well how about world wide? How do I make it so that traffic is directed to the correct ec2 server? I have heard of route 53, and tried signing up for that, but nothing appears in my control panel. Also perhaps it is just a DNS thing with my domain registrar? AHHH... some tutorial would be helpful!

  Read the article

• LAN full of public ipv4 addresses - How to filter it?

  - by sparc86

  The answer to my question maybe is not that hard but anyways, I do not know what to do. So, I just got in a new job in a Univerisity and I found out that the network (the LAN) is full of public IP addresses. Seriously, the whole LAN (probably more than 150 hosts) has it' own internet IP address and I don't know how to manage it. I have a very good experience using iptables (Linux firewall) in a NAT'ed environment. But then how should I proceed in an environment where all my LAN is working with a bunch of public IP addresses? Should I just use the "forward" rules and ignore the NAT rules or is there any other issue in such environment which I should take care? Can I add a firewall between the router and the LAN in order to produce packet filtering for these public IP addresses in my LAN or will this just not work? Thanks!

  Read the article

• Correct usage of Windows Server on network?

  - by Hobart Bosworth

  I have two routers, one with dhcp turned on and the other with it off. this is a functioning home network. Now, I am trying to integrate into it a windows server. Should the windows server be doing the dhcp and dns work? And if so, what will this mean for the existing network? Will I need to reconfigure this? I am currently installing server 2003 onto my server machine. It is connected up to the network on the main router with dhcp. Any words of advice?

  Read the article

• iPhone VPN to iTunes Home Sharing [migrated]

  - by Philip Crumpton

  my goal is to set up a VPN on a Windows machine that contains my iTunes library then connect to that VPN with my iPhone and be able to utilize Home Sharing remotely. I have read that this can easily be set up if the iTunes library is on a Mac (Network Beacon and YazSoft ShareTool are two products I quickly found). I can't find anyone who has had success on a Windows machine, though. In my thinking, there are two options (aside from buying a Mac): 1.) Existing utility that takes care of this for me (like the Mac-only options listed above) and is compatible with iPhone (Hamachi is NOT compatible with iPhone VPN) 2.) Manually configure a VPN to allow Bonjour multicast (can't find any information on this) FYI my router is a Linksys WRT54GL running Tomato 1.28

  Read the article

• How to prefer ipv6 over ipv4 only for specific websites?

  - by kria

  I only have ipv6 connectivity via a HE tunnel on my router, so normally I want to prefer ipv4 over ipv6. For some websites however, I would like to prefer ipv6. Right now I have just set DisabledComponents to 0x20 and hard coded the ipv6 resolution into my hosts file for the sites i want to access over ipv6. Since these ip addresses change at times, this is not a good solution. Any ideas on how to handle this in a non-clunky way? Some kind of Chrome/Firefox add-on might do the trick, but I couldn't find one for this purpose.

  Read the article

• Why do I have inconsistent network issues with my laptop's wireless?

  - by Jason

  I'm having trouble with my laptop Internet connection. It's patchy at best and resets or freezes a lot. The signal strength is also random. I thought it might be a driver issue but now I don't know. Three other computers using the same wireless network run well. I've switched out wireless routers so I don't think it's the router. I thought it might be the laptop's internal wireless card but I just bought an external USB network card and I'm still having problems. Specs Lenovo T-60p Windows 7 Ultimate Edition Patches/drivers are up to date I only use one of the below at a time, disabling the other: Intel PRO/Wireless 3945ABG v. 13.3.0.137 (Internal wireless) Medialink Wireless-N USB 2.0 Adapter (USB wireless) Any ideas on what might be the problem?

  Read the article

• Windows XP doesn't like small subnets?

  - by erniedwork

  This totally sounds like a bug to me, because my subnet mask and IP address should be valid by all accounts. My ISP has assigned me a fixed IP address of 65.110.7.20, with a subnet mask of 255.255.255.252. Which sounds about right, because we're trying to set up a router with a /31 network - just 4 ip addresses. But when I try to set this IP and netmask up in Windows XP, I get the following error: "The combination of IP address and subnet mask are invalid. All of the bits in the host address portion of the IP address are set to 0." But they're not all set to 0. That would be a subnet mask of 255.255.255.255. Even then, that too is a valid subnet mask, consisting of a network of 1 IP address. Is there a way around this? A registry hack maybe?

  Read the article

• How do I transform a LAN subnet to another? (VPN)

  - by Krishath

  I've set up a VPN with a LAN behind it. VPN : 10.2.1.X LAN : 192.168.1.X When I connect from outside where the router via DHCP assigns me a similar IP to my "original LAN" (192.168.1.X) everything starts to be messed up. I can't route my traffic through the VPN and (obviosly) I can't reach my "real" LAN behind my VPN. How can I always reach my LAN? I thought that I can fake my LAN subnet to something like "10.2.2.X" to those PCs out of my VPN but in this way my VPN server should translate 10.2.2.X to 192.168.1.X (locally).[Is this S/D-NAT?] Is this possible? How can I accomplish that? Thank you very much!

  Read the article

• Spambot Infection Detection

  - by crankshaft

  My server has been blocked by CBL for participating in curtwail spambot. Initially we suspected that it was coming from a PC and not from the server, but the router is blocking all packets on 25 except those coming from the server. I have just executed the tcpdump command and every 5 minutes I see a flurry of activity on port 25 that is very suspicious and I am sure that there is some process running on the server: 13:02:30.027436 IP exprod5og110.obsmtp.com.53803 > ubuntu.local.smtp: Flags [S], seq 171708781, win 5744, options [mss 1436,sackOK,TS val 3046699707 ecr 0,nop,wscale 2], length 0 I have stopped postfix, and yet there is still traffic on port 25 above. But how can I find what process is actually communicating on port 25 as it only rund for a few seconds and so for example lsof -i :25 will never catch it. I have been working on this now for 2 days, it is a live server and I cannot simply shut it down, any suggestion on how I can detect the source of this email bot process ?

  Read the article

• minimum required bandwidth for remote database server

  - by user66734

  I want to build a small warehousing application for my company. We have a central warehouse which distributes to 8 sales points across the country. They insist on an in-house solution. I am thinking to setup a central mySQL db Linux server and have the branches connect to it to store sales. Queries to the db from the branches will be minimum, maybe 10 per hour. However I need all the branches to be able to store each sale data ( product ID, customer ID ) in the central db at peak time at most once every five minutes. My question is can I get away with simple 24mbps/768kbps DSL lines? If not what is the bandwith requirement? Can I rely on a load balancing router to combine additional lines if needed? Can you propose some server hardware specs?

  Read the article

• website lookup extremely slow in ubuntu

  - by ubuntulover

  Hi I have a wireless broadband connection through a router and wireless modem. Everything works fine in Windows. However, in ubuntu on the same machine, websites seem to take longer to start loading. I think the dns lookup is slow. I think https sites may be slower, as Ijust can't log in to gmail. I am also using a mercurial repo with remote origin, and it takes forever (like 5 minutes) to push one small change. I think it is because it has to communicate through https multiple times. Should I change my dns server? I've seen that I don't have these problems at my work network (they have another dns server). This happens with the IPv4 settings being automatic (dhcp). When I change it to automatic (dhcp) addresses only, and add google's 8.8.8.8 in the dns servers, it still takes forever. Why is this happening?

  Read the article

• website lookup extremely slow in ubuntu

  - by ubuntulover

  Hi I have a wireless broadband connection through a router and wireless modem. Everything works fine in Windows. However, in ubuntu on the same machine, websites seem to take longer to start loading. I think the dns lookup is slow. I think https sites may be slower, as Ijust can't log in to gmail. I am also using a mercurial repo with remote origin, and it takes forever (like 5 minutes) to push one small change. I think it is because it has to communicate through https multiple times. Should I change my dns server? I've seen that I don't have these problems at my work network (they have another dns server). This happens with the IPv4 settings being automatic (dhcp). When I change it to automatic (dhcp) addresses only, and add google's 8.8.8.8 in the dns servers, it still takes forever. Why is this happening?

  Read the article

• I need a wirless interenet card thingy for my stationary computer

  - by user60859

  Going to move my stationary computer and hook it up to the TV. Which is far away from the wireless router. So i'm going to need a way to go on the Internet wirelessly from my stationary computer. I was looking at some of those.. wireless pci adapter things. But i have no idea which one would be compatible with my computer. How can i tell? oh i have a pentium 4, Windows XP like 600 megs of ram in case any of that matters.

  Read the article

• Access Domain over Wireless

  - by William

  I have an active directory server and all hard wired clients connect perfectly fine. However any wireless clients do not recognize that they are connected to the domain, despite the dns server being appropriately set to the domain controller for both wired and wireless connections. Also - both wired and wireless clients are on the same subnet. I am using a Verizon food actiontec router. What am I missing? For instance, this is the same computer connected first via an Ethernet cable and second via the wireless.

  Read the article

• How to temporarily disable SonicWall from connecting to the internet?

  - by Jerry Dodge

  I have been doing some extensive seeking in our SonicWall TZ-215 for the source(s) of unnecessary internet traffic, as we have issues with excessive traffic. As part of my research, I need to watch the Connections Monitor, which lists me all the current connections. This list becomes quite long, with 40+ devices on the network, it's tough to pinpoint the main causes. What I would like to do is disable the SonicWall its self from letting its internal components from connecting to anything. Is there any type of trick I can do in the Firewall which can prevent the router system from connecting to anything, to clean up the connections monitor and allow only suspicious traffic?

  Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >