Search Results

Search found 34813 results on 1393 pages for 'im fine'.

Page 195/1393 | < Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >

• How to get external 2.5 inch HD enclosure get recognised

  - by fireBand

  I am completely out of ideas. I have 2.5inch HDD from my old laptop, I have tried with 2 different HDD enclosures but my desktop does not recognize it. Not even showing in the disk management or BIOS. The HDD works fine if I use in a 3.5 inch enclosure with external power. I have tried 3 different Y USB cables. I have also got a 7 port self powered 2A USB hub. I have updated my chipset drivers as well. The problem is with my desktop , the enclosures work fine with my new laptop. Anything else that I should try? Thanks in advance.

  Read the article

• Asterisk failing at startup after upgrading to asterisk18

  - by Supratik

  I was using asterisk16 and asterisk16-skypeforasterisk, which was working fine. I have recently upgraded to asterisk18 and asterisk18-skypeforasterisk, after that I am receiving the following error message. Asterisk ended with exit status 1 Asterisk died with code 1. Asterisk could not start! Use 'tail /var/log/asterisk/full' to find out why. When I checked the log I got the following messages. codec_g729a.c: == Found total of 11 G.729 licenses translate.c: empty buf size, you need to supply one Now, if I remove the /var/lib/asterisk/licenses folder it works fine. Can you please tell me what could be the issue here ? Warm Regards Supratik

  Read the article

• Can't access LAN computers with SSH

  - by endolith

  I got a new Windows 7 machine, and was using VNC,SSH etc to connect to my Ubuntu machine, and it worked fine previously. Now it doesn't work if I use the machine's hostname or local IP, but if I use the DynDNS name, it works. I can also access it from my Android phone using the local hostname over SSH. If I try to connect with SSH to the hostname, it says "Host does not exist". VNC says "Failed to get server address". NX says "no address associated with name", and I don't see it in Windows' "Network" folder. I've rebooted everything. I've turned off Windows firewall. It was working fine a few days ago, but now it's not. How do I figure out what's blocking it?

  Read the article

• VMWare Workstation can't read CD/DVD drive

  - by Chris W

  A fresh install of VMWare Workstation 7 (7.1.1 build 282343) on Windows 7 64 bit. When I try to read a CD/DVD from a guest (either to install a fresh guest or to read a CD within an existing VM I get the following error: Cannot connect virtual device ide1:0 because no corresponding device is available on the host. I've tried fiddling with the IDE channels as well as tried SCSI with no joy. What am I missing? I can run ISOs fine but I don't want to have to convert everything to an ISO when I presume that this should just work fine.

  Read the article

• Weird problem, special characters after formatting the hard drive, computer not starting 0_o

  - by m3taspl0it

  Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

  Read the article

• What permissions are needed to do an LDAP bind to an Active Directory Server

  - by DrStalker

  What permissions are needed to perform an LDAP bind to an active directory server? I have a central domain (call it MAIN) that has two-way trusts to domains in other forests (call then REMOTE and FARAWAY) Using MAIN\myaccount as the username and my password I can bind to REMOTE fine, but not to FARAWAY; I get an invalid credentials response 80090308: LdapErr: DSID-0C09030B, comment: AcceptSecurityContext error, data 525, v893 In all other ways the trusts seem to work fine. What permissions do I need to check to figure out why the bind is failing? My understanding is that anyone in AUTHENTICATED USERS should be able to bind to LDAP, but that only seems to hold true for some domaians and not others.

  Read the article

• Command+Tab not working on MacOSX Client with Synergy

  - by dragonmantank

  I have an Ubuntu 11.10 laptop paired with an Apple Wireless Keyboard. I'm using the answer on this question to swap the Command and Option keys so that they are mapped like a regular keyboard. This works fine in Ubuntu. Now I have a Macbook Pro running as a Synergy Client. This mapping kind of works on the Macbook, but it only allows me to Command+Tab between two programs, not all of them. Copy, Paste, and other Command keys seem to work fine, but not Command+Tab. It's annoying just because I use the keyboard a lot. And yes, I could switch to syncing the keyboard and the Macbook, but I use the Ubuntu laptop more.

  Read the article

• Monitor weirdness/flickering with new Viao PCG-3112L

  - by Rosarch

  I have a Sony VAIO PCG-3112L running Windows 7. It worked fine on one monitor, but now I'm using it with a 2 year old LG Flatron W2252TQ-TF. The colors are sorta off (although that might just be the monitor), but more annoyingly there are many horizontal flickering lines. It's more noticeable on non-white backgrounds. I tried rebooting the monitor, and reseting it to factory settings, but that didn't solve the issue. What could be the cause of this? The monitor works fine with an Asus netbook. I have checked that both ends of the VGA cable are plugged in between the Vaio and the monitor.

  Read the article

• Outlook Prompting for password from Exchange server in domain environment

  - by jherlitz

  We are running exchange 2007 in a domain environment. We have mostly outlook 2003 clients, but in process of upgrading to outlook 07 over the next couple of weeks. Some users (both 03 & 07) are constantly getting prompted to enter their credentials. The 07 client I was working on this morning states "needs password" in the bottom right corner. It is also speratic, as it will work fine most days but not some other days. The user I was working with this morning, has been working fine. Now it just started up today. I have been googling this, and have found lot's of information, but nothing that has helped yet. A lot of the information out there is for outlook users using a external email account. Being they already logged into the domain, these users should not be prompted for their credentials. Any advice out there?

  Read the article

• Website loading until initial script finishes

  - by wardy277

  Hi, i have a highly used server (running plesk). I have some long scripts that take a while to process (huge mysql database). I have found then in 1 browser, i run the script and while it is loading i cannot view any other parts of the site until the script finishes, it seems that all the requests go off, but they don't get served until the initial script finishes. i thought this may be a server wide issue, but it is not. If i use another computer i can view the site fine, even on the same computer with a different browser i can navigate fine, while the script still loads. I think it much limit the number of requests per session. Is this correct? is there any way to configure this to allow for 2-3 other requests per session? It is really bad that when i am on the phone to a client, i have just run a long report, but cannot use the site or follow what they are saying until the page has loaded? Chris

  Read the article

• Why can't I share my printer on Windows 7?

  - by Edward Tanguay

  I have Windows 7 installed on two computers. I can share folders between them fine. However, I can't seem to share printers between them: when I right-click on the printer I expect to see "share printer" but there is no option for that. When I read about "share printers" in the Windows 7 help, it talks about this computer "not being able to connect to a home network", yet they seem to be connected fine (I can share files between them). Why can't I share printers between the computers if I can share files?

  Read the article

• Page won't load on IE9 unless developer tools are started first

  - by RoyHB

  One of my pages (with very extensive javascript) won't load on IE9. It loads ok in Mozilla, Chrome, Safari and Opera. If IE9 Developer tools are running it loads fine. If I load IE9, load the developer tools (F12) then kill the developer tools it still loads fine. If developer tools are running then sometimes (but not always) the first message in the console is: HTML1113: Document mode restart from Quirks to IE9 Standards Doctype is: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> If I change doctype to and remove the xmlns nothing changes. I'm stumped. Any suggestions appreciated.

  Read the article

• Vista stuck at "Shutting down..." screen. Any way to get verbose logging?

  - by CapBBeard

  Hi all, My home machine has been running fine for about 3 years, no problems at all. Within the last couple of weeks it's had real trouble trying to shut down. It'll get so far and then just sit there at the "Shutting down..." screen for hours. I've left it overnight, I've tried in safe mode, all to no avail. These days, I just wait for the disk activity to finish up and then hold the power button to turn it off. Feels dirty as, especially because there's a RAID involved! The hardware itself is in pretty good shape and of decent spec; Core 2 Quad, 4GB RAM, 1TB RAID 1+0, so it's not quite like a 7 year old PC coming to end of life! In the last month, hardware hasn't changed except for a new monitor. Admittedly I haven't tried unplugging the monitor but I've never heard of that preventing a shutdown. I might give it a whirl later I guess, as a last resort. I've uninstalled old apps, done updates, checked the event log, looked in device manager, uninstalled all non-present devices, disabled various non-critical devices (imaging, audio etc), unplugged peripherals, stopped non-essential services, unplugged the network, disabled the network adapter entirely, ran chkdsk, verified my RAID, the list goes on. But not a single lead. I'm pretty stumped. It could be hardware, but I have no other evidence to suggest so; when the PC is running, it runs fine. Temperatures are good, gaming is smooth as always, disk performance is fine. Event log even makes it look like the shutdown was completed (gets to the point where the event log service stops). In fact, the PC doesn't appear to realise that I cut the power to it. So my question is, does anyone know if there is a way I can get some verbose output (or a log) from shutdown to give me some idea of what is causing the issue? I'm guessing it's stuck unloading some app/driver but it would be good to get some specifics! Unless anyone has any other ideas? I suspect a reinstall would resolve the issue, however I'm looking to get a new PC built in the next month or so, and the reinstall is going to be quite a big job so I'd rather just wait until then if it comes to that. Would still be nice to get this sorted in the mean time though. Cheers!

  Read the article

• Configuring sendmail to use one outbound MTA exclusively

  - by Charlie Martin

  I have a sendmail problem, and I'm anything but a sendmail guru -- I could use some help. My problem is that I have a system intended to be more or less an "appliance" -- it's not intended to have an admin. Because of this, it needs to be able to "call home" by sending email. As we have configured it, this works fine -- using sendmail, it finds the appropriate relay by looking up an MX record and everything works fine. Now, however, because of security concerns, we want to limit it to using exactly one relay, so for example relay.corp.example.com. Should the user configure it to use, say, fubar.example.com, the mail sending should fail or be deferred. I thought that by configuring sendmail with a /etc/mail/server.switch file containing hosts files without dns, I'd get that effect. This doesn't work -- instead, if it gets mail addressed to [email protected], it tries to talk directly to example.com, and ignores the configured server. Any ideas?

  Read the article

• Issue with https:// url going to an unknown location

  - by Brandon

  We have a website (ASP.NET/Plesk 9.5.5) that can be accessed just fine through the regular URL (http://example.com). However when accessing the site through https://example.com the site displays the invalid security certificate warning, which is fine since we don't have an SSL certificate. If I add an exception, I'm sent to a completely separate site that is apparently hosting a malware script (I'm still on https://example.com though). Because of this Google has flagged the site as dangerous. I can't find anything in the Plesk panel that would help fix this, and as far as I can tell those files don't exist on our server. How do I tell where the https:// link is sending me? I'm not that familiar with DNS, but is that what is causing this behavior?

  Read the article

• Linux Mint Debian Cinammon soundcard selection

  - by Peter Gridling

  i use said OS and i am missing a window or setting to set the default soundcard. I have a builtin analog soundcard which works just fine and is set as default, also i have a usb headset which works fine eg. with mumble i set input and output on my headset and it just works, also the mute button and volume control on the headset works, but on the default soundcard lol. what i am missing is to set my headset as the default soudcard. i also tried some stuff from there: http://wiki.debian.org/ALSA/ but it seems that alsa is not supported 100% :( some1 here to help? best regards

  Read the article

• how to debug mysql has gone?

  - by fefe

  I have a virtual machine(Ubuntu 12.04, MySQL 5.5) running under VMware and is dedicated to host a mysql server. I connect to this server on internal IP. I'm trying to find out why I get mysql server has gone error. One my windows machines apache it stops because of this issue. I have been trying to fine tune my mysql my.cnf with the following parameters but did not bring the desired result. # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 0.0.0.0 # # * Fine Tuning # wait_timeout = 180 key_buffer = 384M max_allowed_packet = 64M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 500 table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M how to debug this issue what is missing from configuration to avoid this error?

  Read the article

• Network on linux server is periodically down

  - by Fabian

  I have an old server running Fedora 4 that occasionally just stops responding via network for about an hour. This happens 1-2 times a week. Also no connection from the server itself to any other computer on the network is possible when it happens. The network settings and routes look fine. There are no unusual log messages and no unusual processes running at that time. If I restart the network or just do an ifconfig eth0 down & ifconfig eth0 up it works fine afterwards. I know that the server should be updated to a currently supported OS, but that is not really an easy option right now. Any ideas on how I could diagnose and fix that problem?

  Read the article

• Windows 7 wifi reports "no network access" and "no internet access" but connects in fedora

  - by rick2047

  I am running windows 7 home basic (64bit) on a Acer 5742G laptop with Atheos wifi adapter in it. Yesterday, I hiberneted my computer as I always do and up untill then the wifi was working fine. When I booted my computer up again today I started having a strange problem: It detects my wifi but after connecting to it, it keeps on oscillating between states of no network access and no internet access. I can't connect to anything (the internet or my router). I tried to reset my internet protocol stack using this fixit file. I also tried to uninstall and reinstall my network driver. Neither helped. I am using the same laptop's fedora installation right now and the wifi is working perfectly fine. Please help. Edit To add additional details, I have Microsoft Security essentials as my antivirus software and I haven't messed with the firewall or the router configurations.

  Read the article

• LAN connection suddenly domain_not_set.invalid

  - by Liam Coates

  I went to work today - internet fine as always. Came back, dreaded yellow triangle. I can connect wirelessly like i am now on my tablet. Thats completely fine. But through LAN I get the domain_not_set.Invalid message if I renew my IP for example. It seems I just don't have a DNS. But I have literally not touched anything no ones even been in the house. Hows that happen? Any help on why only wireless works would be great, I am gonna buy a wireless adapter tomorrow for the interim but I would like to know why. Thanks.

  Read the article

• Apache mod_proxy to another server

  - by trobrock

  I am using the proxy_balancer in Apache2 to proxy requests to a Rails application to my rails server on the port the application is running on. This is how its set up... Rails Server Mongrel running on port 8000, when accessing the url directly to http://rails_server:8000 the site loads fine Apache Server Conf file for the site: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName myserver.com ServerAlias application.myserver.com <Proxy balancer://application_cluster> Allow from localhost BalancerMember http://ip.to.server:8000 retry=10 </Proxy> ProxyPass / balancer://application_cluster </VirtualHost> The problem I am having is going to http://rails_server:8000 works fine, but going to http://application.myserver.com Loads the right content, but is displaying all the HTML as text and not rendering it as html

  Read the article

• How to make PDF pages with U3D images print properly?

  - by David Thornley

  I'm creating some PDF files that have three-dimensional images (U3D) in them. When I bring them up in Acrobat, everything is fine until I try to print the file. If I've viewed a page, it prints fine, showing the U3D image as I last saw it. If I haven't viewed a page yet, the printout is blank. (I can demonstrate this right from the Print dialog, by previewing pages.) The only reference I've seen to printing U3D is in the PDF Standard, which says, basically, that this should work. It recommends "PV" or "PO" for the A key in the 3D activation dictionary, and I'm using libharu which uses "PV".

  Read the article

• SCSI driver installation trouble

  - by Vicky

  I tried to install the driver of Adaptec 39320A-Ultra 320 SCSI card in Win2003 Server R2 SP2 in a DELL PowerEdge 2950 Server. I selected the driver from the list of drivers present in windows. But it says that the device could not be started(Code 10). I tried to put the card in a system that already had the driver installed. It worked fine. So there is no problem with the hardware. I even tried downloading the driver from the manufacturer website. When I try to select install from path and install that driver, it tell no matching driver found. When I install the default driver from windows, it shows the card in SCSI group of device manager, but with an ! symbol. Also the device ID in driver details was different from that of the one present in other system where it insalled fine. Any suggessions to solve it?

  Read the article

• Why does my company's software download get blocked by anti-virus programs when downloading from the company website but not other websites?

  - by Adam Burgess

  My company distributes software via website download off of a URL that is on our company's website. The download is an .EXE. We are getting calls from multiple customers saying the download is being blocked. We can help them download by turning off the virus-scan software, but wondering what is causing the block. Here are the details: We have other downloadable .EXEs that download fine without being blocked from the same company website. Our problem download file downloads fine from other websites (i.e., Dropbox) without being blocked. In summary, this one particular download from our company website is being blocked by various anti-virus programs a high percentage of the time. Any suggestions?

  Read the article

• Why is access to my database very slow?

  - by Fabien

  I have a mysql database that used to work perfectly fine, but now it is dead slow on startup. When I type in $> mysql -u foo bar I get the following usual message for about 30 seconds before I get a prompt : Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Of course, I tried it and it goes a lot faster : $> mysql -u foo bar -A But why do I have to wait so long in regular startup ? This is not a very big database, and data does not seem to be corrupted (everything looks fine after startup). I have no other client connecting to the mysql server at the same time (only one process is shown with the command show full processlist) and I have already restarted the mysqld service. What's going on ?

  Read the article

< Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >