Search Results

Search found 8970 results on 359 pages for 'space'.

Page 195/359 | < Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >

• What virtualization solution should I try next, after hitting problems w/ VMWare Player in dual-netw

  - by Alex R

  I have been using VMWare Player 2.5 for a while (Ubuntu guest on Vista host, 32-bit). VMWare had worked great until now but then I hit a brick wall: Due to some reorganization of my home network, the host machine now has to use a wireless connection to reach the Internet, while the printer, fileserver, and other important stuff are attached to a local gigabit hub. I have tried several tricks, such as editing the .vmx file, changing settings in vmnetcfg, etc, but I'm still unable to get the virtual Ubuntu box to connect each of the two virtual NICs to different networks (I did get it to recognize two NICs, but both DHCP'd onto the gigabit LAN). So, I'm ready to dump vmware for something with a little more low-level control of network settings. Virtualization is such a crowded space, I could spend months evaluating every product out there. I'm hoping for a shortcut... Can anyone recommend the best VM for my situation described above? Thanks

  Read the article

• Select firefox search result

  - by Nicolas C.

  I am working on a daily basis on a web application with very large menus. Also doing lots of other Excel manipulations, copy and pasting, etc., I am quite fond of keyboard shortcuts as much faster than using the mouse to point, double-click and then going back to my keyboard etc. Hence, my question is quite simple, does anyone know if there is any shortcut under Firefox which would let me actually select (and not highlight) in my web page the search result so that I can for instance do the following manipulation sequence? [Ctrl]+[F] type the search string, for instance 'regional_unit' the missing shortcut to actually select in my page the string which is currently highlighted thanks to the search feature of FF [Space] or [Enter] key to activate the web element which in my case would systematically correspond to a link or button, etc. May be there would be an addon replacing the default search feature, I don't know... I tried to look over the internet but with the words I am using for this investigation, I do not get relevant search results under Google :(. Thanks a lot

  Read the article

• Symlink across local volumes in webroot?

  - by geerlingguy

  I am looking for a good short-term solution to storage space concerns on my website. Currently, I have all uploaded files (flash video, images, etc.) inside the 'files' directory in my web root (/home/account/public_html/files). That directory is located on my high-speed main hard drive (a 15k SCSI drive). I have another drive with much more capacity, but spinning at 10k rpm (so still fast, but not as good for random reads/writes as the main drive. The entire drive is mounted at /backup Right now I'm just using it as a backup volume. I would like to create a symlink from my /home/account/public_html/files folder to /backup/files, and have all files reside on the second drive. However, if someone accesses a file at http://www.example.com/files/filename.jpg, would it still work if I symlinked to the second drive? (Basically, would Apache/PHP automatically know to follow the symlink for that directory?).

  Read the article

• Repartition hard drive using Mac OS X, keep existing data

  - by Jonny

  I got a 1 TB disk a year or so ago and loaded it with some hundred of GB of data. I somehow neglected to check the file system, which turns out to be FAT-32 and thus too small for files bigger than 4 GB. So now I want to change it, without deleting the data. I thought I'd just make a new partition in the so far unused space. Then with the new partition, copy/move the data into the new partition, and then delete the old FAT-32 partition, and make the new partition bigger again... or just make a few more partitions. The critical step here is, can I make that new partition without ruining the data? The data should be fairly sequentially added to the start of the disk, but what do I know... so that's why I'm asking. Can I safely use Disk Utility for this? Any recommended file system?

  Read the article

• Snow Leopard - Dock icons randomly disappear

  - by lostInTransit

  Snow Leopard works great! My mac's really fast after this. But sometimes the dock icons just disappear! I see the blue dot beneath when I click the empty space. So I know the item's there. But there are no icons! This happened for Safari and Downloads. Some people responded on the Apple forums that I should try and remove the dock's plist file. But this just restores the dock to its original settings! I don't want to lose my settings. Anyone else facing this issue with SL? Or is it a problem only I am facing? Thanks

  Read the article

• Use Windows 7 offline sync with external usb hd

  - by René

  Yeah, truly the whole question in the header. Is there a way to use Windows 7 offline sync (which we know from network mapped drives) with a external usb hd? When not, are there similar built in tools or good third party tools? My scenario: I want to buy a ultrabook with SSD which is mostly limited in space. So I'm going to put all files to a external HD and only store current projects on the local SSD. Let's say I have to change project. It would be easy just change sync folders and have the second project synced to my hd too. With network mapped drives it's such easy. Paths do not differ if the drive is offline so in most situations you don't take notice if the folder is offline. And you only have to activate offline file for the folders you courrently need for work. So is there a similar solution for usb hard drives?

  Read the article

• Lotus notes 8.5 quota

  - by Cividan

  we're using lotus notes 8.5 and I have a user who was over his quota as he had sent 6 email with attachement over 800 MB (no comment...) I deleted these oversized email and empty the trash but domino keep sending email warning about quota. I checked in the all documents view and they are no longer there, I re-did an empty the trash. I saw a post on the internet saying to compact his database, when I go under file, application, properties and click on the info tab, I see that he use 35.7% of the 3 GB database. when I click on "compact" I see a message saying the compact of the database is beeing process... the message disapear after about 1 minutes the message disapear but nothing else seem to happen and when I look back later on the space problem has not changed. any advice would be appreciated.

  Read the article

• Moving Exchange .EDB and .STM file to other partition

  - by Jorge Fernandez

  Im trying to move my exchange mailbox store to a new partition and i keep running into an error message saying: "cannot copy insufficient system resources exist to complete the requested service." The server is a Dell Poweredge 2850 with Dual Xeon Processors @ 3.00GHz and 4GB of ram. Running Win Server 2K3 R2 SP2 with Exchange 2K3 Standard. The Store is around 55GB any ideas. I want to get exchange on its on partition since I need to free up some space on the partition its currently on.

  Read the article

• Google Chrome pinned to Windows 7 taskbar not opening under pinned icon

  - by Slothsberry

  I have both Google Chrome and Eclipse pinned to my taskbar in Windows 7 64-Bit. However, when I launch these programs, they don't appear to open under the pinned taskbar icon Eclipse behaves similarly. The Eclipse launcher/workspace selector is under the pinned icon, but once the IDE opens, it moves from the pinned icon, to a new group at the end of the taskbar. Unpinning/repinning doesn't seem to do the trick. It's bothersome to have taskbar space wasted on both the launcher icon, and the window button. Anybody have an idea how to get normal behavior out of the taskbar?

  Read the article

• Crossplatform "jail" for an application

  - by Alexander

  We currently have a variety of systems (Linux, Solarix, *BSD, HP-UX ...) on which we are not allowed to install anything into / (but I have root access. That's strange, I know). But we'd like to run Puppet on all of them. So, the obvious idea is to install Puppet with all prebuilt dependencies into some isolated tree, something like "jail", which will allow to use dependences from some prefix and to access the host system. The big advatanges would be uniform deployment and updates. One solution that came to my mind is to deploy Gentoo Prefix, and install Puppet there with package manager. However, this requires a lot of extra space and some manual patching for each system. Maybe there are some more elegant and simple solutions?

  Read the article

• What is the right iptables rule to allow apt-get to download programs?

  - by anthony01

  When I type something like sudo apt-get install firefox, everything work until it asks me: After this operation, 77 MB of additional disk space will be used. Do you want to continue [Y/n]? Y Then error messages are displayed: Failed to fetch: <URL> My iptables rules are as follows: -P INPUT DROP -P OUTPUT DROP -P FORWARD DROP -A INPUT -i lo -j ACCEPT -A OUTPUT -o lo -j ACCEPT -A INPUT -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT -A OUTPUT -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT What should I add to allow apt-get to download updates? Thanks

  Read the article

• I bought a domain name at GoDaddy and hosting at Dreamhost but the first doesn't work!

  - by janooChen

  I added the Dreamhost's nameservers like 12 hours ago to: I entered to the following panel: Nameservers -> Set Nameservers (I have specific nameservers for my domains) and added Dreamhost's nameservers liek this: Nameserver 1: NS1.DREAMHOST.COM Nameserver 2: NS2.DREAMHOST.COM Nameserver 3: NS3.DREAMHOST.COM So now in the admin panel I see this: Nameservers Nameservers: (Last Update 2/10/2011) NS1.DREAMHOST.COM NS2.DREAMHOST.COM NS3.DREAMHOST.COM But I get this when I run the analysis tools: Attention Required! There are critical issues Accessing Your Web Site Accessing Your Web Site Properly configuring your domain name and hosting account ensures that visitors can access your site. Did I do something wrong or I have to wait 24 to 48 hours? (Dreamhost does display my page because I can access the other domain name I bought together with the hosting) (By the way, if everyone uses the same nameserver, how will go GoDaddy know which is the hosting space that I purchased among all others)? Thanks in advance.

  Read the article

• Will Windows 7 setup overwrite Windows 8 and Ubuntu boot records?

  - by Jens

  I have Windows 8 and Ubuntu installed, both an the same physical hd (2 partitions). Windows 8 was installed after a format, Ubuntu afterwards. I used EasyBCD to setup the boot records and the boot menu order. I want to install Windows 7 as a third operating system and just add its boot record with EasyBCD. Will there be any unwanted behavior when I install it on a third partition? I already have 100 GB of unallocated space on the disk, though have not yet made the partition. I red on this site that I should install the oldest OS first, but than I would have to do a format and start again from scratch (which I clearly do not want to do). edit: On this site, the opposite is claimed, saying it's also possible to install Windows 7 after Windows 8. However, it will restore a Windows 7 boot menu instead one of Windows 8.

  Read the article

• Network Block Device (NBD) clients for Windows or similar solutions

  - by przemoc

  Are there any NBD clients for Windows? Strangely, I cannot find any, or I am searching for them in a wrong way. Such client should be possibly a driver with front-end tool (may be a command-line one) allowing to create virtual drives and associate them with given hosts (or simply localhost) and ports where NBD servers are listening. From user perspective virtual drive should be close to what physical drive is, so it should be accessible as something like \\.\PhysicalDriveX (maybe \\.\VirtualDriveX?), be visible in Disk Management (diskmgmt.msc) and mountvol tools at least. (The only thing I found remotely close to NBD on Windows is ImDisk's proxy mode and companion tool devio, but AFAIK ImDisk only works at partition level (so no virtual drive) and devio uses different protocol.) Secondary question is: Are there any (preferably simple) Windows-specific solutions allowing creation of virtual drive delegating read/write request to user-space via some explicit way (like via TCP, IPC, DLL implementing given API, etc.)?

  Read the article

• How to print new line character with echo?

  - by Summer_More_More_Tea

  I dump a string with hexdump like this 2031 3334 2e30 0a32 2032 3331 302e 000a. It is clear that 0x0a is new line character, however, when I try to echo this string out, I always got 1 430.2 2 13.0 -- the new line is replaced with a space, even I use the -e flag. What may be the problem? Does the tailing \0 ruin the output? Is there any alternatives to print 0x0a a new line? Thanks and Best regards.

  Read the article

• Hyper-V Virtual Disk Creation Taking Forver

  - by mnemosyn

  After some struggle, I finally managed to set up Hyper-V 2008 R2 on our server. So I connected to it using the Hyper-V Manager from a Windows 7 client and used the "New Virtual Machine Wizard". I set up a 350GB virtual hard disk. So I hit the "finish" button and the Hyper-V manager has been working for 24hours now, showing merely a dialog "Creating Disk". A console on the Hyper-V still reports 99.9% free space on the HD, but the machines HD LED flashes from time to time (making a rather idle impression, it's not flashing frenetically). Does this usually take this long? Is there a way to find out whether it's still working or just idling? Should I repeat the process? Guides on the net tell me to be patient, but 1d seems a bit extreme!?

  Read the article

• SQL server environment

  - by Olegas D

  Hello I'm considering a bit of changes in current sales environment. And trying to check all cons and pros. Current situation. SQL server (quite decent HP server - server1) + backup server (smaller Dell server - server2). all sql files and sql server itself are on the server1. If something goes wrong with server1 I will have to manually move to server2. Connecting to the sql server: 1 HQ (where server located) + 4 sites through VPN. Now I'm considering 2 scenarios: Buy some storage system + update existing servers (add ram, upgrade processors) and go for VMWare ESXI. Rent a server at a datacenter + rent virtual server in case real server goes down. Also rent some space at data storage to keep SQL files there. Have anyone considered these things and maybe found some good pros/cons list? ;) Thanks

  Read the article

• Windows: Should I install Server or stick with regular?

  - by stalker92

  I hope somebody can help me solve my dilemma. I have my home PC (using Windows 7) which I use for both work and leisure (gaming, surfing, movies etc.) I tend to never turn it off, only when I must reboot because some installation requires me to or when the power gets lost. But, sometimes Windows starts acting weird (usually after the long period of system uptime), per example eats up randomly all the space on my system partition etc. which is solved after the reset by itself. I was thinking to switch to Windows Server, I guess that it is more optimized for long uptime, well, obviously it is meant for use on servers. Can somebody with more experience with this help me decide is it worth it, will it solve these issues connected with long uptime periods? Thanks in advance.

  Read the article

• df-h command in ubuntu

  - by Esha Sharma

  I am a new user of Ubuntu. When I type df -h in terminal , it gives me list of all storage devices and space usage. In my system I get this. Filesystem Size Used Avail Use% Mounted on /cow 934M 173M 761M 19% / udev 925M 4.0K 925M 1% /dev tmpfs 374M 856K 373M 1% /run /dev/sdb1 7.5G 2.8G 4.8G 37% /cdrom /dev/loop0 1.5G 1.5G 0 100% /rofs tmpfs 934M 16K 934M 1% /tmp none 5.0M 0 5.0M 0% /run/lock none 934M 76K 934M 1% /run/shm /dev/sda 299G 74M 299G 1% /media/q I understand that /dev/sda is my hard drive which is 320 gb(in gib it is 299 and hopefully that is what is being displayed) and /dev/sdb1 is pendrive of 8gb from which I am running the live cd. My question is what are the other folders and what is the physical location of these folders if complete memory is taken by the device dev/sda?

  Read the article

• Crap, hard disk failure. Can I recover my "move"d folders?

  - by Doug

  I am in the process of moving all my files from an old laptop to new one. I just moved 11gb of data from my old laptop to a hard drive (external) and then upon moving it out to the new hard drive, the hard drive is getting a CRC (Data Error (Cyclic Redundancy Check). Now I am looking for a solution to recover the files that I moved on my old laptop (not the external). I understand they they are just marked for potential overwriting to free up space. I was getting ready to test out GetDataBack, but it says to install it on a healthy windows and use the recover-needed drive as an external. However, I don't want to turn off my computer without first getting the okay since it is in a "moved" state. Please help! What can I do to recover the Moved files. I haven't touched the computer since it has been moved. What can I use to recover them?

  Read the article

• Set up Ubuntu in Virtualbox to have static ip

  - by Don H

  I frequently work in different locations, and need to have a virtualbox version of Ubuntu server running locally. While I was at home getting it set up, I was able to ssh into the server using the locally allocated IP address. However, now that I'm elsewhere, ifconfig is still showing the old 10.0.x.x ip address, but instead of being in the 10.0.x.x space, my laptop's ip starts with 192.168.x.x With that in mind, if there a straightforward way to set up the virtual box Ubuntu server in such a way that I can just connect using "ssh servername" regardless of it's ip address?

  Read the article

• What is the cleanest way to upgrade Fedora and also my individual installs while keeping /home?

  - by Don

  I am a professional programmer, using Fedora 10 (and a host of other packages individually installed). I use my system to telecommute. Every year or so, I go through the ritual dance, usually with a second computer and a KVM switch as I don't have office space for two monitors, to build the next version of Fedora and install all my favorite apps. Is there a better way? At least a nice way to keep track of what I need to 'add on' so that I don't have to manually install my app collection? Also, I keep /home on a separate raid-ed drive set so I can also fall prey to 'old-config-file-itis'.

  Read the article

• Improve efficiency when using parallel to read from compressed stream

  - by Yoga

  Is another question extended from the previous one [1] I have a compressed file and stream them to feed into a python program, e.g. bzcat data.bz2 | parallel --no-notice -j16 --pipe python parse.py > result.txt The parse.py can read from stdin continusuoly and print to stdout My ec2 instance is 16 cores but from the top command it is showing 3 to 4 load average only. From the ps, I am seeing a lot of stuffs like.. sh -c 'dd bs=1 count=1 of=/tmp/7D_YxccfY7.chr 2>/dev/null'; I know I can improve using the -a in.txtto improve performance, but with my case I am streaming from bz2 (I cannot exact it since I don't have enought disk space) How to improve the efficiency for my case? [1] Gnu parallel not utilizing all the CPU

  Read the article

• Vim: I don't want to insert!!!

  - by bhh1988

  I could not find anything online addressing this problem, which is surprising. The problem is that I find it very easy to accidentally insert stuff in Vim. I know I can undo by with 'u', but it still is quite annoying and frequent. Often, I enter a command like 'sp file.txt' without realizing that I haven't entered the ':' character yet (so I'm not yet on the command line). Unfortunately, there are several characters that take you to insert mode, including 's', 'a', 'i', 'o'. I'd rather have insert mode mapped to just one keybinding which is very deliberate, like shift-space. Can anyone point me to something that might have what I'm looking for? Thanks.

  Read the article

• Default maximum heap size -- Ubuntu 10.04 LTS, openjdk6-jre

  - by sachin

  I just installed openjdk6-jre on Ubuntu 10.04 java version "1.6.0_20" OpenJDK Runtime Environment (IcedTea6 1.9.2) (6b20-1.9.2-0ubuntu1~10.04.1) OpenJDK 64-Bit Server VM (build 19.0-b09, mixed mode) Every time I run "java" I get this error: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. This can be solved by specifying a maximum heap size and running "java -Xmx256m" But is there anyway to permanently fix this error (i.e. set the default heap size to 256MB so that I do not need to specify the max heap size every time I run the command)

  Read the article

< Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >