Search Results

Search found 6625 results on 265 pages for 'advice'.

Page 196/265 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

• How to set up RAID-0 first time on new PC?

  - by jasondavis

  I have built basic PC's in the past but have never used a RAID array at all. SO now I am buying parts to build my new PC, it will be an intel i7 processor. My motherboard will have RAID support which I will use instead of an aftermarket raid controller for now. Also I plan to use 2 SSD drives in RAID-0 for my windows 7 OS. (Please note that I am aware of the issues with doing this, including lack of TRIM support when using RAID with SSD drives. I am OK with it not working as I can just re[place the drives in a year or so or wheneer they become more sluggish). SO here is my question part. If I assemble the motherboard, PSU, processor, RAM, vidm card, etc and then go to turn the PC on, it will have the 2 SSD drives hooked up. so I assume I will then soon the BIOS screen before I install windows? How to I go about making the 2 drives work in RAID-0 at this point? I do the raid part before installing my OS right? Please help with the steps involved from assembling the parts of the PC and then turning it on, to the part of getting the RAID-0 set up between the 2 drives and then installing my windows 7 OS from a Optical drive? Please help, all advice, instructions, tips appreciated as long as on topic. I do not need to be told that this is a bad idea as far as if 1 drive fails I losse it all, I plan on having a disk IMAGE to be able to restore my OS and software to a new set of drives at anytime needed in the event of drive failure. Same goes for lack of TRIM support. Thanks for reading and help =)

  Read the article

• How can I wipe my iPod classic and fix any bad sectors on the hard drive without killing it?

  - by Sam Meldrum

  My iPod never finishes syncing and only syncs audio, not pictures or video. Any ideas as to how I can fix it? My iPod classic 160GB worked well for a couple of years. I used to sync a lot of photos at full resolution to it, but this recently stopped working after I moved to Windows 7. iTunes is on latest version - 9.1.1.12 iPod software is up to date - 1.1.2 Windows 7 is fully up to date and patched The symptoms are that the iPod will start to sync, all audio (music and podcasts will sync successfully) but the syncing will then just appear to continue - itunes message: Syncing iPod. Do not Disconnect. This sync never completes - I have left it trying for days. I have tried resetting the iPod using the Restore button, whereupon it restarts sync from default options and again will sync audio, but nothing else. I suspect that something has gone wrong on the hard-drive - either a bad sector or some corrupt data. Is there a process I can go through to fix this? E.g. SpinRite or a format? If so how do I go about formatting an iPod and will it be recognised as an iPod after format and work as normal? Any advice on what to try next much appreciated? Update I have eliminated problems with the files, PC or iTunes as they sync fine to other iPods. I have also eliminated the cable by trying different cables which work with other iPods. What I'd really like to know is if there is any way to more fundamentally wipe the iPod safely, attempt to repair any bad sectors on the hard drive and then start from scratch. Anyone ever managed this?

  Read the article

• Mounting any Windows share from OS X 10.7.5 suddenly stopped working

  - by user2169619

  I have problem with mounting Windows network shares from my OS X 10.7.5 - it worked but it stopped and nothing helps and nothing in logs. Here what I get when trying to mount it manually: mount -t smbfs //10.0.0.7/d /tmp/test When doing sniffing with tshark - no packet it sent through and I get immediately return from the command: mount_smbfs: server connection failed: Unknown error: -1 Nothing in /var/log/syslog.log and /var/log/kern.log. The Finder does not work either - it throws an error that something is wrong (in czech thus I'm not sending the message here). I just cannot connect to any network shares. In virtual Windows 7 in Parallels Desktop I can connect successfully, but not within the network share (so the Win7 is behind OS X NAT) but only with its own IP address. The Windows server share is on the same network segment connected through switch. Any advice how to debug and what can be wrong? I spent hours to find solution on Google and here but no-one with this kind of problem and I do not know how to further debug it since there is no meaningful log / trace etc. I can ping 10.0.0.7 and I can connect to FTP server on 10.0.0.7 - the Windows machine (XP) has firewall completely turned off. The problem is that with tshark, I'm not seeing any packet sending to 10.0.0.7 so it's not even trying to reach the server.

  Read the article

• Transparent proxying leaves sockets with SYN_RCVD in MacOS X 10.6 Snow Leopard (and maybe FreeBSD)

  - by apenwarr

  I'm trying to create a transparent proxy on my MacOS machine in order to port the sshuttle ssh-based transproxy VPN from Linux. I think I almost have it working, but sadly, almost is not 100%. Short version is this. In one window, start something that listens on port 12300: $ while :; do nc -l 12300; done Now enable proxying: # sysctl -w net.inet.ip.forwarding=1 # sysctl -w net.inet.ip.fw.enable=1 # ipfw add 1000 fwd 127.0.0.1,12300 log tcp from any to any And now test it out: $ telnet localhost 9999 # any port number will do # this works; type stuff and you'll see it in the nc window $ telnet google.com 80 # any host/port will do # this *doesn't* work! After the latter experiment, I see lines like this in netstat: $ netstat -tn | grep ^tcp4 tcp4 0 0 66.249.91.104.80 192.168.1.130.61072 SYN_RCVD tcp4 0 0 192.168.1.130.61072 66.249.91.104.80 SYN_SENT The second socket belongs to my telnet program; the first is more suspicious. SYN_RCVD implies that my SYN packet was correctly captured by the firewall and taken in by the kernel, but apparently the SYNACK was never sent back to telnet, because it's still in SYN_SENT. On the other hand, if I kill the nc server, I get this: $ telnet google.com 80 Trying 66.249.81.104... telnet: connect to address 66.249.81.104: Connection refused telnet: Unable to connect to remote host ...which is as expected: my proxy server isn't running, so ipfw redirects my connection to port 12300, which has nobody listening on it, ie. connection refused. My uname says this: $ uname -a Darwin mean.local 10.2.0 Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386 i386 Does anybody see any different results? (I'm especially interested in Snow Leopard vs Leopard results, as there seem to be some internet rumours that transproxy is broken in Snow Leopard version) Any advice for how to fix?

  Read the article

• VMware NAS/iSCSI recommendations - smallish organization

  - by Bubnoff

  I have two VMware servers - ESX + ESXi. Two backup NAS boxes. The current NAS boxes are low-cost and unsuitable for running VMs from. Support NFS only. Slow. My plan is to have a dedicated iSCSI/NAS for storing and running VMs. Two additional low-cost boxes for backup. I'm looking for advice regarding 2 things really: Recommendations as far as VMware architecture/design for a smaller organization. Less than 20 Virtual Machines. 2 servers + 2 x 1.5 terabyte backup NAS boxes. A good NAS/iSCSI box with your recommendation on RAID config ...I would go with 6 or better. I'm trying to design an installation that is both fast and reliable/redundant. If you have any experiences to share or your current configuration including network design ( switches, fiber ...etc ), I will be enormously thankful. I'm not married to this idea, so if you have a design not using iSCSI NAS boxes ...let er rip. Cost? Can we stay around $5,000 ( on top of already stated components )? Links to info are welcome also. Thanks for reading! Bubnoff

  Read the article

• Anonymous file sharing without login window, from Windows 7 server to XP clients

  - by Niten

  I'm trying to provide machines on a small LAN with read-only, anonymous access to files shared from a Windows 7 workstation (let's call it WIN7SVR). In particular, I don't want clients to have to deal with a login window when they navigate to, e.g., \\WIN7SVR in Windows Explorer, but we do not have a domain and synchronizing accounts between the server and clients would be intractable. There are both Windows 7 and Windows XP clients that need access to these shares. I got this working for Windows 7 clients by just enabling the Guest account on WIN7SVR and setting appropriate share permissions. Other Windows 7 machines automatically try logging in as Guest, it seems, so their users don't have to deal with the login window. The problem is with the XP clients--they can access the server if the user enters "Guest" in the login window, but I don't want users to have to do that. So from what I gather, in my limited understanding of Windows file sharing, this boils down to granting null sessions access to file shares on WIN7SVR. But I've had no success so far on that front. I've tried all the following in the local group policy editor on the Windows 7 server: Set Network access: Let Everyone permissions apply to anonymous users to Enabled Set Network access: Restrict anonymous access to Named Pipes and Shares to Disabled Added the names of corresponding shares to Network access: Shares that can be accessed anonymously Added "ANONYMOUS LOGON" to Access this computer from the network under User Rights Assignment Any advice would be highly appreciated... I'm mostly a Unix guy, so I feel somewhat out of my league with Windows file sharing. I do understand that any sort of anonymous access to file shares isn't generally ideal from a security standpoint, but it's the most practical solution for us in this case, and access to our network is well enough controlled that share-level security isn't a concern.

  Read the article

• iptables -- OK, **now** am I doing it right?

  - by Agvorth

  This is a follow up to a previous question where I asked whether my iptables config is correct. CentOS 5.3 system. Intended result: block everything except ping, ssh, Apache, and SSL. Based on xenoterracide's advice and the other responses to the question (thanks guys), I created this script: # Establish a clean slate iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -F # Flush all rules iptables -X # Delete all chains # Disable routing. Drop packets if they reach the end of the chain. iptables -P FORWARD DROP # Drop all packets with a bad state iptables -A INPUT -m state --state INVALID -j DROP # Accept any packets that have something to do with ones we've sent on outbound iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT # Accept any packets coming or going on localhost (this can be very important) iptables -A INPUT -i lo -j ACCEPT # Accept ICMP iptables -A INPUT -p icmp -j ACCEPT # Allow ssh iptables -A INPUT -p tcp --dport 22 -j ACCEPT # Allow httpd iptables -A INPUT -p tcp --dport 80 -j ACCEPT # Allow SSL iptables -A INPUT -p tcp --dport 443 -j ACCEPT # Block all other traffic iptables -A INPUT -j DROP Now when I list the rules I get... # iptables -L -v Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 DROP all -- any any anywhere anywhere state INVALID 9 612 ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT all -- lo any anywhere anywhere 0 0 ACCEPT icmp -- any any anywhere anywhere 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:ssh 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:http 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:https 0 0 DROP all -- any any anywhere anywhere Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 5 packets, 644 bytes) pkts bytes target prot opt in out source destination I ran it and I can still log in, so that's good. Anyone notice anything major out of wack?

  Read the article

• Diagnosing "The specified module could not be found" on IIS7 with ASP.Net

  - by Baldy

  I am migrating some web apps from a windows 2003 server with IIS6 server to a Windows server 2008 R2 server with IIS7. One of the apps, which runs on asp.net v2.0 using forms authentication will not load. It gives me the following error... The specified module could not be found. (Exception from HRESULT: 0x8007007E) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E) Now i fully understand that the app cannot load some kind of resource due to a FileNotFoundException, but i am struggling to diagnose exactly where in the application this is happening, as it does not tell me what the module is, nor what file it is looking for. I have enabled failed request tracing and i get back a complete request trace, yet i cannot find anything that gives me detail on this specific error, or the module involved. Any advice on diagnosing the root cause of the issue would be greatly appreciated.

  Read the article

• Struggling with proper way to setup Permissions on Linux/Apache Web Server

  - by Dr. DOT

  Your expert experience and assistance is great, greatly appreciated here. I have been running a LAMP server for a long time, yet I still struggle with the best way to set file & directory permissions for FTP and WWW protocol activity. My Control panel is WHM/cPanel (not that it makes a difference), and out-of-the box: files are owned by the user account setup in WHM (eg, "abc") files have a group setting of "abc" as well file permissions are created with 644 directories are owned by "abc" directories have a group setting of "abc" directories permissions are created with 0755 Again, these are the default permission settings. Now everything is fine with FTP activity, but please advise me if any of these file/directory settings create issues, especially with security. Here's where my struggle comes into play. I have PHP apps that allow a visitor to create, edit, rename, delete, etc. sub-directories and files in certain selected directories. PHP runs as "nobody" on my server. So in order to get my PHP/Web apps to work, I have had to: chown nobody * chgrp nobody * chmod 0777 * to everything in these certain & selected sub-directories. I know this is probably a huge security whole (so don't ask me for any links :) but how should I set all the permissions to allow my FTP user to do his thing while allowing the PHP apps to do their thing will also "minimizing" any security risks and exposures? I know that big CMS systems like Drupal, Joomla, WordPress and so on, handle this. Thanks ahead of time for reading through this and offering your expert advice!

  Read the article

• Using URL rewrite module for http to https redirect

  - by johnnyb10

  Following ruslany's suggestion on the URL Rewrite Tips page here, I'm trying to use URL Rewrite to redirect http:// requests for my site to https://. I've written and tested the rule using a test site I set up, and so now the final piece is to create a second site (http) to redirect to my https site. (I need to use a second site because I don't want to uncheck the "Require SSL encryption" checkbox on my existing site.) I'm an IIS newbie so my question is: how do I do this? Should I create a site with the same name and host header, only it will be bound to http? Will IIS let me create a site with the same name? I don't want to screw anything up with my existing site (which is a SharePoint site, currently used by external users). That site currently has http and https bound to it. So my assumption is that, using ISS (not SharePoint), I will create a new site (http only) with the same name and host header as my existing site, and add the URL Rewrite rule to the http site. And then I guess I should remove the http binding from my existing site? Does that seem correct? Any advice, gotchas, etc., would be appreciated. Thanks.

  Read the article

• Running $ORIGIN linked binaries from setuid scripts on linux

  - by drscroogemcduck

  I'm using suidperl to run some programs that require root permissions. however, the runtime linker won't expand library paths which contain $ORIGIN entries so the programs i want to run (jstack from java) won't run. more info here There is one exception to the advice to make heavy use of $ORIGIN. The runtime linker will not expand tokens like $ORIGIN for secure (setuid) applications. This should not be a problem in the vast majority of cases. my program looks something like this: #!/usr/bin/perl $ENV{PATH} = "/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/java/jdk1.6.0_12/bin:/root/bin"; $ENV{JAVA_HOME} = "/usr/java/jdk1.6.0_12"; open(FILE, '/var/run/kil.pid'); $pid = <FILE>; close(FILE); chomp($pid); if ($pid =~ /^(\d+)/) { $pid = $1; } else { die 'nopid'; } system( "/usr/java/jdk1.6.0_12/bin/jstack", "$pid"); is there any way to fork off a child process in a way so that the linker will work correctly.

  Read the article

• Using URL rewrite module for http to https redirect

  - by johnnyb10

  Following ruslany's suggestion on the URL Rewrite Tips page here, I'm trying to use URL Rewrite to redirect http:// requests for my site to https://. I've written and tested the rule using a test site I set up, and so now the final piece is to create a second site (http) to redirect to my https site. (I need to use a second site because I don't want to uncheck the "Require SSL encryption" checkbox on my existing site.) I'm an IIS newbie so my question is: how do I do this? Should I create a site with the same name and host header, only it will be bound to http? Will IIS let me create a site with the same name? I don't want to screw anything up with my existing site (which is a SharePoint site, currently used by external users). That site currently has http and https bound to it. So my assumption is that, using ISS (not SharePoint), I will create a new site (http only) with the same name and host header as my existing site, and add the URL Rewrite rule to the http site. And then I guess I should remove the http binding from my existing site? Does that seem correct? Any advice, gotchas, etc., would be appreciated. Thanks.

  Read the article

• Anonymous FTP upload on CentOS 5.2

  - by Craig

  I need to allow users to upload files to an FTP server anonymously. They should not be able to see any other files, or download files. It is a CentOS 5.2 server. I have a separate partition for the the upload area (mounted at /ftp). I have tried to set up vsftpd, followed all the instructions/advice I could find. But, when a user logs in and tries to transfer a file it throws a "553 could not create file." error. If I do a 'pwd' it shows the directory as "/" rather than the anon_root of "/ftp/anonymous". Any attempt to change the remote directory ends with "550 Failed to change directory.". I have a subdirectory "/ftp/anonymous/incoming" that is writable for the uploads SELinux is in permissive mode. I am running version 2.0.5 release 16.el5 of vsftpd. Here is the vsftpd.conf file: anonymous_enable=YES local_enable=YES write_enable=YES local_umask=002 anon_umask=007 file_open_mode=0666 anon_upload_enable=YES anon_mkdir_write_enable=NO dirmessage_enable=YES xferlog_enable=YES connect_from_port_20=YES chown_uploads=YES chown_username=inftpadm xferlog_std_format=YES nopriv_user=nobody listen=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES ftp_username=inftpadm anon_root=/ftp/anonymous anon_other_write_enable=NO anon_mkdir_write_enable=NO anon_world_readable_only=NO dirlist_enable=YES Can anyone help?

  Read the article

• How can I proxy multiple LDAP servers, and still have grouping of users on the proxy?

  - by Chris

  I have 2 problems that I'm hoping to find a common solution to. First, I need to find a way to have multiple LDAP servers (Windows AD's across multiple domains) feed into a single source for authentication. This is also needed to get applications that can't natively talk to more than one LDAP server to work. I've read this can be done with Open LDAP. Are there other solutions? Second, I need to be able to add those users to groups without being able to make any changes to the LDAP servers I'm proxying. Lastly, this all needs to work on Windows Server 2003/2008. I work for a very large organization, and to create multiple groups and have large numbers of users added to, moved between, and removed from them is no small task. This normally requires tons of paperwork and a lot of time. Time is the one thing we don't normally have; dodging the paperwork is just a plus. I have very limited experience in all this, so I'm not even sure what I'm asking will make sense. Atlassian Crowd comes close to what we need, but falls short of having it's own LDAP front end. Can anyone provide any advice or product names? Thanks for any help you can provide.

  Read the article

• How to install Windows 7 on a MacBook with HDDs and no optical drive, without rEFIt

  - by user1238528

  I just removed the SuperDrive on my MacBook Pro and replaced it with an SSD. So now my laptop has a SSD, and a HDD, but no optical drive. I have Lion on the SSD and I want to install Windows 7 on the HDD. Unfortunately, Boot Camp only will install Windows off of the Windows DVD. I have made a bootable Windows 7 thumb drive but my MacBook Pro won’t boot off it. So my question is how can I install Windows on the other HDD? I have thought about maybe using Oracle VirtualBox to install it on that hard drive, but I don’t know if that would allow me to boot directly into Windows. I really don't want to go down the whole virtualization route. I know I could just take out the SSD, put back in the optical drive, run the Windows 7 DVD, take the optical drive back out, put the SSD back in. But that sounds like a nightmare. Also, I really don’t want to use things like rEFIt. Any advice?

  Read the article

• Client unable to access OWA website after temporarily changing SSL certificate on the server

  - by Lorenz Meyer

  I have the following issue: One client computer (Windows XP) cannot access the OWA website. All other client computers can (Except another one in the same remote office). How this happened: I temporarily changed the SSL certificate on the Exchange Server yesterday. After a few minutes, I reverted back, an now the same certificate that was installed for years is back again. During these few minutes, they were in OWA on this computer and got a certificate error. What exactly happens: Internet Explorer displays the error Internet Explorer cannot display the webpage, Firefox displays The connection was reset and Crome shows This webpage is not available. The connection to ... was interrupted. What I already did to try to get this working: Restart the client computer Restart the exchange server Deleted Internet Explorer browsing history In IE, Internet Options, tab Content, under Certificates deletes SSL cache Restored Internet Explorer to the default parameters I looked into certmgr.msc, but did not find a certificate related to the issue What could I do else to narrow down the origin of this problem (or better: resolve it) ? Can you give any advice ?

  Read the article

• Does MySQL have some kind of DoS protection or per-user query limit?

  - by Ghostrider

  I'm a bit at a loss. I'm running a MySQL database that's roughly 1GB data in indices combined on a dedicated Linux server. DB version is '5.0.89-community'. Configuration is controlled via cPanel. PHP actually runs elsewhere on a shared hosting. IP addresses are static and don't change. Access from remote IP address is properly configured. Website gets around 10K hits per day with each hit generating a a database query. Some of these queries are expensive (~1 sec execution time). All is fine and well until at some point DB server starts refusing connections from the client, claiming that specific user can't access the server from that IP. Resetting the server will always fix the problem for a day or two and then the same thing happens. There are some other DBs on that server, some of which are hit pretty hard on occasion but constantnly. One of the apps maintains several persistent connections since it does couple of updates per minute. Though I don't think it's related. What's driving me mad is that I can't figure out why server would start refusing connections. There is nothing in the logs. This server is a hosted dedicated server so hosting company created the OS image and I didn't write or go over every line of configuration. I'd do it but I'm at a loss as to where start looking. Any advice is appreciated.

  Read the article

• CentOS 6.5 x64 + Ajendi +nginx + php-fpm + mysql setup unable to load the PHP page

  - by Francis

  I'm using Ajendi to setup a PHP web server, I can load the PHP info page, when I try to load the PHP copy from other server, I get a blank page with this log appear on access log, I have no clue what was wrong and troubleshoot further, please advice. x.x.x.x - - [28/May/2014:10:08:37 -0400] "GET /index.php HTTP/1.1" 200 31 "-" "Mozilla/5.0 (Windows NT 6.1; rv:29.0) Gecko/20100101 Firefox/29.0" 2.6.32-431.1.2.0.1.el6.x86_64 cat /etc/redhat-release CentOS release 6.5 (Final) The vhost config AUTOMATICALLY GENERATED - DO NO EDIT! server { listen *:80; server_name test.com www.test.com; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; root /www; index index.html index.htm index.php; location ~ \.php$ { alias /www; fastcgi_index index.php; include fcgi.conf; fastcgi_pass unix:/var/run/php-fcgi-php-fcgi-0.sock; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } }

  Read the article

• Does my Oracle DBA need root access?

  - by Dr I

  I'm currently discussing with my Oracle DBA Collegue that request a root access on our production servers. I'm not so hot to let him use the root access on our production servers. He is arguing that he need it to perform some operations like restarting the server and some other obscure arguments. The point is that I'm not agree with him because I've set him a Oracle user/group and a dba group where Oracle user belong. Everything is running smoothy and without any root permissions for now. I also think that all administrative tasks like scheduled server restart and so one need to be operated by the proper administrator (The Systems administrator on our case) to avoid any kind of issues related to a misunderstanding of the infrastructure interactions. So, I need the help of both, sysadmins and Oracle DBAs to lead me on the correct direction. If my collegue really need this rights I'll give him, but I'm just basically quite affraid of that because of security and integrity concerns. I know that my collegue is really good as a Oracle DBA and he know is work very well, but I also know that I've very few cases where a software and its admin really need root access. Once again, I'm not looking for pros/cons but rather an advice on the way that I should take to deal with this situation.

  Read the article

• nginx reverse proxy to apache mod_wsgi doesn't work

  - by user11243

  I'm trying to run a django site with apache mod-wsgi with nginx as the front-end to reverse proxy into apache. In my Apache ports.conf file: NameVirtualHost 192.168.0.1:7000 Listen 192.168.0.1:7000 <VirtualHost 192.168.0.1:7000> DocumentRoot /var/apps/example/ ServerName example.com WSGIDaemonProcess example WSGIProcessGroup example Alias /m/ /var/apps/example/forum/skins/ Alias /upfiles/ /var/apps/example/forum/upfiles/ <Directory /var/apps/example/forum/skins> Order deny,allow Allow from all </Directory> WSGIScriptAlias / /var/apps/example/django.wsgi </VirtualHost> In my nginx config: server { listen 80; server_name example.com; location / { include /usr/local/nginx/conf/proxy.conf; proxy_pass http://192.168.0.1:7000; proxy_redirect default; root /var/apps/example/forum/skins/; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } After restarting both apache and nginx, nothing works, example.com simply hangs or serves index.html in my /var/www/ folder. I'd appreciate any advice to point me in the right direction. I've tried several tutorials online to no avail.

  Read the article

• Apache Server not working in MAMP

  - by jasonaburton

  Here's what I did before the problem started: I was creating a database for a site that I am working on in phpMyAdmin. I wrote some code to try to connect to the database I just created and I couldn't connect. I assumed it might be because I needed a password to connect to the database, so I created a password for it. Immediately after I created the password phpMyAdmin kicked me out saying: "#1045 - Access denied for user 'root'@'localhost' (using password: YES)" "phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server." I found the php.ini file and searched for where I could change the password to match the one I just made, but couldn't find where I needed to change it. So I decided to scrap the database and uninstall MAMP from my computer and reinstall it hoping it would just reset all the defaults and I could go on my merry way. But now after reinstalling MAMP and trying to run the servers Apache won't start up and I have no idea why. One problem after another... Any advice or helpful ideas?

  Read the article

• How should I perform database maintenance on a 24x7 system

  - by solublefish

  I'm a software developer who inherited a part-time DBA role. I'm responsible for an application backed by a small, high-volume 24x7 database on SQL Server 2008. While there's other stuff in the DB, the critical piece is a 50GB, 7.5M row table that serves 100K requests/sec during peak load, and about half that at "night". This is 99%+ read traffic, but the writes are constant, and required. I need to be able to perform periodic maintenance without a maintenance window. Say an index rebuild, a job to purge old data, Windows Update, or hardware upgrade. Most of the advice I've seen is along the lines of "MAKE a maintenance window." While I appreciate the sentiment, I hope there's another way. If it will solve this problem, I do have the ability to purchase new hardware or modify the database, the clients (a set of web services servers), and much of the application code (ADO.NET + ASP.NET). I've been thinking along the lines of using the warm spare (or a 3rd server) to do the maintenance, and then "swap" it into production. 1 Synchronize the spare by restoring backups, including a current transaction log. 2 Perform the maintenance tasks. 3 Reconfigure clients to connect to the spare server. Existing connections are finished within a minute or so. 4 The spare server is now the production server. The problem remaining is that the new production server is now out of date by however long it took to perform maintenance. Is there some way that the original production server can be made to queue up changes and merge them to the spare between steps 2 and 3? Any other ideas?

  Read the article

• Windows 7 search does not return results from indexed folders

  - by Dilbert

  I am experiencing this issue over and over again and I just cannot seem to find the answer. It doesn't make sense, but search simply does not return results from folders that certainly have these files inside. It's weird that this technology exists for more than 5 years now (it could be added to Windows XP as an addon), and they still haven't got it right. My folder contains 10 image files with .png extensions. Two scenarios: Scenario 1: I exclude the folder using Indexing options. Search works. Scenario 2: I turn on indexing for this folder. Search does not work. Of course, Agent Ransack returns results every time. When I check Advanced options for the Indexing options inside control panel, .png files are checked in the File Types tab, using the "File Properties filter". What's the deal with this? [Edit] To clarify, this doesn't happen with all folders, but does with more than one. For the "problematic" folders, even *.* doesn't return a single result. I found some advice to clear the archive and readonly attributes for all files (doesn't make sense, but hey), but it didn't work. Indexing status in Control panel is: Indexing complete. 100,000 items indexed. Folder is included in the list. File types list contains the .png extension (although it doesn't work with any filter, not even *.*).

  Read the article

• What Media Extender / Centre Set up should I use?

  - by Bryn Hird

  I have installed cat6 throughout the house which I use for telephony and network. In my cellar I have a NAS Server, gigabit switch and I want to install a Media Centre to stream my video's, music, photo's and live TV (coax from the aerial to the cellar) over the cat6. Yeah I know I can get stuff on the internet but shared experience of watching TV as a family as it happens is a big plus for live TV. I'm aiming for 1080p. I want different users to be able to watch different channels. Max users = 4. I've played a little with Windows Media Centre, works fine with live TV. Likewise I have XBMC up and running with live TV. The issue I have is what do I put near the TV. I'd like a consistent user interface (grandma and the the other technophobes in the house are continually pestering me on how to use different TVs, change channel, inputs etc.) so a key part of this for me is to make the user experience the same and simple i.e. no keyboards / PCs hanging around the TV. I've just bought a Linksys DMA 2200 to test the Windows Media Centre, but obviously off eBay as they're a dying breed. And with Windows Media Centre removed from Microsoft plans such devices will get rarer. And as for 1080p, think I can forget it with that set up. I have tested XBOX 360, also works but ditto on Microsoft plans for WMC. I was thinking of a WD Live TV to test the XMBC setup. Now to the question. Any advice on Media Centre / Extender setups that will do the job as above and have some degree of futureproofing (building my own with my Raspberry PI is a last resort). I'd like to understand the standards involved in the futureproofing if anyone knows (DNLA, RVU etc.).

  Read the article

• How do I setup JBoss 5.1.0.GA to run multiple instances?

  - by djangofan

  Does anyone have any experience or advice in setting up multiple JBoss 5.1.x instances on the same machine that has 1 network card? Here is what I did: Installed JBoss 5.1.0.GA into c:\myjboss 1.5. I copied the server/default directory to server/ports-01 and server/ports-02 so they have their own config. did I assume correctly? Ran .\run.bat -c ports-01 Ran .\run.bat -c ports-02 At this point there are 2 instances but the second instance doesn't load correctly because of what is probably a few port conflicts. For example: the http port ends up being 8080 for both instances, which it gets from line #49 in the C:\myjboss\server\all\conf\bindingservice.beans\META-INF\bindings-jboss-beans.xml file. Earlier in the server load it clearly gets the value from line#63 in that same file. I don't know why it gets part of the port config from line #49 and the other part from line#63. Confused. I also tried: .\run.bat -Djboss.service.binding.set=ports-01 -c ports-01 and it made little difference. Any ideas on what I am doing wrong?

  Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >