Search Results

Search found 22641 results on 906 pages for 'visual studio express 200'.

Page 196/906 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

  • SATA 3 PCIe Controller working with decreased performance (slower than SATA 2)

    - by V M
    After reading this question about maxing out an SSD I decided to do so myself. My mobo only supports SATA 2 and has two PCIe 2.0 x1 connectors (which promiss up to 500 mb/s). So after some searching I decided to go with this controller from amazon. My Samsung magician benchmark before upgrade (running SATA 2): Now after installing the controller all of the benchmark scores are lower (even though the Samsung Magician app confirms its connected to a SATA 3 port): What can I do to remedy this? Any help is appreciated.

    Read the article

  • cannot connect to <server_name>\sqlexpress

    - by Jackson Sunuwar
    I have tried disabling firing wall and checked sqlbrowser is started but for some reason I cannnot connect to my datbase... called server_name\sqlexpress.. I have a virtual machine and a full scale MS SQL Server 2008 R2 running on it... and I have several other vm running sqlexpress. they run fine and I can connect to them using sqlexpress... but when i try to access from sqlserver... I get this error. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) Digging deep into the error, I found this Error Number: -1 Severity: 20 State: 0 and finally this... Program Location: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser() Firewall is turned off on the VM that's running mssqlserver... I turned of firewall on one of the vm that's running the sqlexpress but I still get the error... can someone please help... thank you

    Read the article

  • How do you test if a PCI slot is working - motherboard diagnostic software?

    - by Adam
    I suspect that my motherboard is bad, and that my PCI-E slot is not working. I have a Gigabyte motherboard that had a Hauppage 2250 working fine in the PCI-E slot for many months. However - recently - would not get TV channels that I used to get --- until finally Media center cant detect any channels at all. Got a new tuner card (ATI 350 card) - cant detect any channels. The cable signal is good - I have it connected directly to a TV - all channels come in clear. SO that is why I suspect a motherboard problem. Are there any motherboard diagnostic scanner utilities that can verify I need a new motherboard

    Read the article

  • Linux PCIE Physical Bus Address

    - by Without me Its just Aweso
    I am working on designing a custom PCIexpress card. I am trying to write a kernel module that will DMA my custom card. Right now when i plug the card into linux no valid PCI device shows up (meaning I probably have a error on my end, i know) however, If I halt the system at startup in the bootloader (uboot) I am able to directly access the card as I know in uboot the physical memory address that is mapped to my device. Is there a way I can access the card in a simliar fashion in linux? Thanks, Stephanie

    Read the article

  • Notebook computer battery says: plugged in but not charging with no further information. Is the bat

    - by Jian Lin
    My 1.5 year old Dell Studio 15 notebook computer has a battery and I keep it attached to the notebook but 98% of the time I just plug in the power adapter. Lately when I unplugged the power adapter, the battery was only good for 10 minutes, and a few days ago, when I unplugged the power adapter, the computer simply turned off. When clicking on the battery icon on Win 7, it says "Plugged in, not charging": is the battery dead? Or can Win 7 have any option to not charge the battery? It is a Dell Studio 15, I wonder if in such case, it looks like it can be a manufacture's defect, would Dell replace the battery? (if there was a recall, then they probably would, i think). The notebook is 1.5 year old.

    Read the article

  • Z77 Motherboard with i7-2600K cpu, what will not work?

    - by Mxx
    I'm building a new system. So far I think I narrowed it down to Gigabyte GA-Z77X-UD5H (Z77 Ivy Bridge chipset) motherboard. I was planning to get i5-3570K(Ivy Bridge) cpu, but now I can get i7-2600K(Sandy Bridge) cpu for free. It is my understanding that Ivy Bridge platform brings support for PCIe3 and (additional?)USB3 ports. If I were to put SB cpu into IB motherboard, what is going to happen to PCIe3 slot? Will it not work at all or downgrade to PCIe2? Also, what is the situation with USB3 ports?

    Read the article

  • Loading guest OS's (Windows) localhost through my host's (Mountain Lion) browsers

    - by Jonah Goldstein
    For work, I have to develop in Visual Studio, which I run via VMware's fusion 5. I really want to test via my mac's native browsers for a multitude of reasons. that is, view the IIs web stuffs that my windows VM should expose, in my mac's own native Firefox, Chrome... etc. if i could expose a pretty url, that would be even better, but i would certainly settle for an ugly IP :) I got a decent number of views but no response when I asked in VMware's own boards. Everyone seems to want to go the other direction (developing in sublimetext/textmate serving up through MAMP and exposing it to windows browsers to test) and there seems to be tried a true solutions for this. unfortunately (or fortunately depending on your preference) my startup is pretty entrenched in the visual studio development tools. I'm really hoping that someone knows the answer to this. Thanks :)

    Read the article

  • Can I fully disable my PCIe Video/Graphics Card per BIOS/Software?

    - by Jook
    Because of a quite noisy fan of my HD6700 I was wondering, if I could fully disable my video card through BIOS or even some Software/Windows. Switching to Intel I7 2600 internal video helped already with the noise, but it would be great to have the HD6700 only build in, but not activated/powered. So that the fan could stay compleatly off. Of course, I could just remove the video card, but I would like to avoid that. Is there any way? My Mainboard is an ASUS P8H67-M Pro, with Intel I7 2600 and ATI HD6500

    Read the article

  • Second monitor not detected

    - by Gabriel
    Hi I have two VGA monitors, my GPU is ATI PowerColor 6850 which has two DVI slots, I use adapters for both VGA monitors. If I connect any the two monitors in the first slot it will work right away (along the plugin confirmation sound). And if I connect any of both monitors to the second slot I won't get anything, nor a signal or confirmation sound. I also tried auto detecting via Catalyst Control Center and Windows Desktop Resolution. I have the latest drivers installed. EDIT: I found this on the Spec Description: Display Connectors DL-DVI-I/SL-DVI-D And in NewEgg: 2 x DVI (1 Single Link, 1 Dual Link) Could this have anything to do with my issue?

    Read the article

  • Good Motherboard for 16/16/4 configurations?

    - by Burnzy
    I am looking for a board that supports 16/16/4 configurations (lga 1366 of course). For 2 graphic cards in SLI (250gts twin frozr) and a revodrive(not bought yet -20-227-578--Product"http://www.newegg.ca/Product/Product.aspx?Item=N82E16820227578&cm_re=revodrive--20-227-578--Product ). This boards seems alright for my needs (http://www.newegg.ca/Product/Product.aspx?Item=N82E16813131665&cm_re=sabertooth--13-131-665--Product), but I am afraid it's going to be too tight for both of my graphic cards. Do anyone know any other board that would do the job? Preferably asus motherboards, as they are the most stable boards I know Thanks for your help!

    Read the article

  • Expresscard Not Detected in PCI-E Adapter

    - by maxpower47
    I'm trying to put an expresscard TV tuner (Avermedia HC82) into my HTPC using this expresscard to PCI-E adapter. I've verified that the tuner works fine in my laptop. The motherboard is a Biostar TF7050-M2. When I install it and turn it on, the light on the back of the adapter comes on fine (there are two indicator lights on the back to show if it is using PCI-E or USB communication, USB communication goes through a USB cable connected between the card and a header on the motherboard) showing that it is working in PCI-E mode. However, the device is never detected in Windows 7 Professional x64. The auto detect never happens, it doesn't show up in the device manager, and I can have it rescan for new hardware and nothing is found. I tested the whole setup (tuner + adapter) in another PC (also using Win 7 Pro x64) and it worked fine. I also tried: Plugging the adapter in to the PCI-E x16 slot on the motherboard (I verified first that the x16 slot worked by installing a video card in it) Booting into safe mode and rescanning Updating the chipset drivers Installing the tuner drivers first Using a different USB cable, plugged in to one of the known good ports on the back of the board Trying it without the USB cable plugged in Removing the other PCI cards that were installed on the board Looking through the BIOS for any setting that might be disabling it somehow to no avail. I'm at a loss for what else to try. I really don't want to RMA it (the shipping back to newegg will be almost as much as it cost to buy in the first place. Any ideas?

    Read the article

  • so i installed sql server now how do i connect to it?

    - by letseatlunch
    SO i have a server running windows server 2008 r2 and i just installed Microsoft sql server 2008. I used the manager thing to create the database and the tables, etc and now i want to connect to it via my visual studio which is on a different machine. so how do i do that? do i need to "turn on" the sql server, do i need to do port forwarding? do i have to modify the iis or change those settings? is there a good article someone can me point me to? just to further help you help me, i understand how to connect to a datasource in visual studio my problem is more with the sql server and understanding how to properly set it up once installed. Sorry for the noob question, i got it all installed and i know how to use it once its all going i just don't know the in-between. thanks in advance dave

    Read the article

  • Problems with undo in VS2010, I need help figuring out what is wrong

    - by IZZO
    I have been battling with my Microsoft Visual C# 2010 Express for a while now. When I undo things some times it works fine and other times it replaces lines of code I didn't touch with lines I deleted. It seems to pick targets at random and most of the time I can easily repair what it has done or just not save the changes. This problem is starting to drive me crazy. Does anyone have any idea why this is happening to me? When I was using Microsoft Visual 2012 this never happen. I have tried to search this problem with no luck so far.

    Read the article

  • PCIe network card deactivate DVI output (but NOT VGA output) on Shuttle SG41J1+

    - by wazoox
    It's all in the title :) Inserting a network card (or any other PCIe card, RAID controller, SAS, etc ) in the PCIe 16x slot of the Shuttle SG41J1 deactivate the DVI output. The VGA output still works fine. Shuttle support says that it's a chipset limitation (G41 + ICH7), but that doesn't make sense to me : the VGA and DVI share the same hardware but the D/A converter stage. Does anyone think that there may be some solution to this conundrum? Can a future BIOS update solve the problem?

    Read the article

  • 5 x 3GB drives and 4 x 1500GB drive best raid setup?

    - by Zen_Silence
    Hello, I am building a file server my plan is the have the Operating system on one raid partition and the data storage on another partition. I currently have 5 x 3GB IDE drives that i would like to put the operating system on theses drives are old but that doesnt matter to me at the moment i have a ton of them so for this raid partition i would probably want to be able to pull out dead a drive and rebuild the array. My file partition is going to consist of 4 x 1.5TB SATA drives I would like the maximum storage with some redundancy. Any suggestions to which Raid level i should use would be greatly appreciated and if you could also suggest a PCI or PCI-e raid controller to handle theses arrays. Thanks in Advance, Zen_Silence

    Read the article

  • How can I change the font color of the VS2012 Source Control Explorer window?

    - by RM.
    I am using Visual Stuido 2012 Integrated Shell with Team Explorer. I would like to change the default font color of the mapped and not mapped folders in the Source Control Explorer (in the treeview). I tried the Visual Studio Color Theme editor, but it seems like the font color of the Source Control Explorer and the Team Explorer can not be changed by it. I also looked at Tools|Options|Environment|Fonts and Color for a setting but did not find anything. Is it possible to change the font color? How?

    Read the article

  • I don't have a free PCI / PCI-e slot, can it be worked around?

    - by Borek
    I need to add a PCI(e) card to a nettop PC that is so small that the card won't fit there (and there is no external alternative like we're used to with external TV tuners). The only ports available are USB and eSATA, is it possible to somehow "dock" the PCI card into some device that would then connect to the PC via USB or eSATA? Or am I out of luck? (I don't mind the solution being visually ugly, I wouldn't even mind opening up the case and soldering some wires in, anything that would work would be great.)

    Read the article

  • Two video card on one Mobo

    - by InfinityKing
    I recently purchased a new HP Pavilion p6-2265eo. It was then that I realised that it has only one DVI and one HDMI output.. I will connect my TV with the HDMI. so I am letft with only one DVI output. I need to have two monitors. Please help. Should I purchase a new video card and install it? My knowledge is limited. The specifications of my comp says that there is 1 x PCI-E x16, 3 x PCI-E x1. 1) I suppose that the video card already present in my purchase is connected on the PCI-E x16. Am I right? I dont want to open my desktop right now and check it for myself as it can void the warrenty. so I need an experienced person to tell me that. 2) I have an old nvidia geforce 7200 gt. Is it possible for me to connect it to my left over PCI-E x1? I searched for PCI-E x1 on the net and as far as I can understand the slot is too small for my old nvidia geforce 7200 gt graphic card. 3) what are the options? Please help this dummo :) Thankign you in advance,

    Read the article

  • How do I connect my NetXtreme BCM5755M Gigabit Ethernet PCI Express in y Dell latitude d630?

    - by Stanton.Sculpture
    Trying to get my 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02) working with my wifi. I just installed Raring Ringtail on this dell latitude D630 and I can't get it to connect without a wifi dongle. This is what I got when I typed sudo lshw -c network: *-network description: Ethernet interface product: NetXtreme BCM5755M Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 02 serial: 00:21:70:98:04:32 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.128 firmware=5755m-v3.29 latency=0 link=no multicast=yes port=twisted pair resources: irq:44 memory:fe8f0000-fe8fffff *-network description: Wireless interface physical id: 2 bus info: usb@2:1 logical name: wlan0 serial: 7c:dd:90:11:a0:10 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.8.0-31-generic firmware=0.29 ip=10.0.0.8 link=yes multicast=yes wireless=IEEE 802.11bgn Also, when I go to additional drivers in the software and updates settings, no proprietary drivers show up. I've tried sudo apt-get install b43-fwcutter firmware-b43-installer because it worked on a bunch of old Dell laptops that I converted over before, but it didn't work on this one. Is this driver even compatible with wifi? Please help.

    Read the article

  • How to install Oracle Database 11g Express Edition on Ubuntu 12.10?

    - by Praneeth Pj
    I installed the Oracle database following the steps mentioned in this blog. Downloaded 11g express edition Created a new user oracle under the group dba. Following steps are executed using this. Unzipped oracle-xe-11.2.0-1.0.x86_64.rpm.zip and then converted the rpm to the Ubuntu package by running: sudo alien --scripts -d oracle-xe-11.2.0-1.0.x86_64.rpm Created /sbin/chkconfig file and added the entries as specified there. Created /etc/sysctl.d/60-oracle.conf and added the entries as specified in the same link as above. Running the commands: ln -s /usr/bin/awk /bin/awk mkdir /var/lock/subsys touch /var/lock/subsys/listener .deb generated in step 3: sudo dpkg --install oracle-xe_11.2.0-2_amd64.deb Left the default values as it is: sudo /etc/init.d/oracle-xe configure Set the following env variables in ~/.bashrc file: export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe export ORACLE_SID=XE export NLS_LANG=`$ORACLE_HOME/bin/nls_lang.sh` export ORACLE_BASE=/u01/app/oracle export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH export PATH=$ORACLE_HOME/bin:$PATH Running the commands: chown -R oracle:dba /var/tmp/.oracle chmod -R 755 /var/tmp/.oracle chown -R oracle:dba /tmp/.oracle chmod -R 755 /tmp/.oracle Starting Oracle Database 11g Express Edition instance: sudo service oracle-xe start sqlplus / as sysdba and got the following: SQL*Plus: Release 11.2.0.2.0 Production on Thu Jan 3 09:41:58 2013 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to an idle instance. Now when exectuting any SQL statements on SQLplus, I end up with the following error: SQL> select * from dual; select * from dual * ERROR at line 1: ORA-01034: ORACLE not available Process ID: 0 Session ID: 0 Serial number: 0 I have increased the swap memory as specified here $ free -m total used free shared buffers cached Mem: 3901 3428 473 0 182 1988 -/+ buffers/cache: 1258 2643 Swap: 5066 0 5066

    Read the article

  • Can't add ADO.NET Entity Model because of error

    - by Freshblood
    I am using VS 2010 Express.This error appear "Error HRESULT E_FAIL has been returned from a call to a COM compenent" When i try to Add ADO.NET Entity Data Model. VS 2008 PRO is installed on my pc too but i don't think that it is caused by VS 2008 .I tried to reinstall VS 2010 Express but still same. How can i fix it ?

    Read the article

  • Not able add .mdf file in App_data

    - by vinod R
    HI I am not able to add .mdf file in App_data(vs 2008 web developer). If i right click on App_data and try to add new item and select sql server file and click OK. I am getting error as "Connections to Sql Server files(*.mdf) require SQL Server Express 2005 to function properly.Please verify the installation of the component or download from the url:http://www.microsoft.com/Sqlserver/2005/" But i have installed SQL Server Express 2005 still it is giving the same error(i have installed sql server after installing vs 2008) Please help me

    Read the article

  • SQL Server Management Studio – tips for improving the TSQL coding process

    - by kristof
    I used to work in a place where a common practice was to use Pair Programming. I remember how many small things we could learn from each other when working together on the code. Picking up new shortcuts, code snippets etc. with time significantly improved our efficiency of writing code. Since I started working with SQL Server I have been left on my own. The best habits I would normally pick from working together with other people which I cannot do now. So here is the question: What are you tips on efficiently writing TSQL code using SQL Server Management Studio? Please keep the tips to 2 – 3 things/shortcuts that you think improve you speed of coding Please stay within the scope of TSQL and SQL Server Management Studio 2005/2008 If the feature is specific to the version of Management Studio please indicate: e.g. “Works with SQL Server 2008 only" Thanks EDIT: I am afraid that I could have been misunderstood by some of you. I am not looking for tips for writing efficient TSQL code but rather for advice on how to efficiently use Management Studio to speed up the coding process itself. The type of answers that I am looking for are: use of templates, keyboard-shortcuts, use of IntelliSense plugins etc. Basically those little things that make the coding experience a bit more efficient and pleasant. Thanks again

    Read the article

  • MS Query Analyzer / Management Studio replacement?

    - by kprobst
    I've been using SQL Server since version 6.5 and I've always been a bit amazed at the fact that the tools seem to be targeted to DBAs rather than developers. I liked the simplicity and speed of the Query Analyzer for example, but hated the built-in editor, which was really no better than a syntax coloring-capable Notepad. Now that we have Management Studio the management part seems a bit better but from a developer standpoint the tools is even worse. Visual Studio's excellent text editor... without a way to customize keyboard bindings!? Don't get me started on how unusable is the tree-based management hierarchy. Why can't I re-root the tree on a list of stored procs for example the way the Enterprise Manager used to allow? Now I have a treeview that needs to be scrolled horizontally, which makes it eminently useless. The SQL server support in Visual Studio is fantastic for working with stored procedures and functions, but it's terrible as a general ad hoc data query tool. I've tried various tools over the years but invariably they seem to focus on the management side and shortchange the developer in me. I just want something with basic admin capabilities, good keyboard support and requisite DDL functionality (ideally something like the Query Analyzer). At this point I'm seriously thinking of using vim+sqlcmd and a console... I'm that desperate :) Those of you who work day in and day out with SQL Server and Visual Studio... do you find the tools to be adequate? Have you ever wished they were better and if you have found something better, could you share please? Thanks!

    Read the article

  • MS Query Analizer/Management Studio replacement?

    - by kprobst
    I've been using SQL Server since version 6.5 and I've always been a bit amazed at the fact that the tools seem to be targeted to DBAs rather than developers. I liked the simplicity and speed of the Query Analizer for example, but hated the built-in editor, which was really no better than a syntax coloring-capable Notepad. Now that we have Management Studio the management part seems a bit better but from a developer standpoint the tools is even worse. Visual Studio's excellent text editor... without a way to customize keyboard bindings!? Don't get me started on how unusable is the tree-based management hierarchy. Why can't I re-root the tree on a list of stored procs for example the way the Enterprise Manager used to allow? Now I have a treeview that needs to be scrolled horizontally, which makes it eminently useless. The SQL server support in Visual Studio is fantastic for working with stored procedures and functions, but it's terrible as a general ad hoc data query tool. I've tried various tools over the years but invariably they seem to focus on the management side and shortchange the developer in me. I just want something with basic admin capabilities, good keyboard support and requisite DDL functionality (ideally something like the Query Analyzer). At this point I'm seriously thinking of using vim+sqlcmd and a console... I'm that desperate :) Those of you who work day in and day out with SQL Server and Visual Studio... do you find the tools to be adequate? Have you ever wished they were better and if you have found something better, could you share please? Thanks!

    Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >