Search Results

Search found 36143 results on 1446 pages for 'ask ubuntu'.

Page 197/1446 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

• Hard time installing Ubuntu

  - by Nick

  I have a MSI GT780DXR that currently is booting windows 7. I've been trying to dual boot windows 7 and ubuntu for some time now. Here's specs that I think would make a difference Windows 7 500GB*2 RAID 0 hard drives. (Hardware RAID I'm not sure if it's a dedicated RAID card though) 7200RPM Nvidia GT570M Background: I tried to install 12.04 (64 bit) a few times but the Desktop live cd and pendrive boots with a black screen. I've tried wubi but it boots to a black screen as well. I then tried the alternative 12.04 (64 bit) and went through the installation all the way til partitioning. I let Ubuntu notice the raid setup and I setup my swap, /, and home drives, I used my free space to create the three partitions. I tried to resize the windows drive and it told me I couldn't and to be happy with my current setup. When I finally got past I got an error on installing GRUB 2 and decided to skip it and continued on to finish installation. When I tried to boot up I got an invalid partition table error. Windows recovery disc, and a GPARTED live cd couldn't find any hard drives. I ended up following advice and typed this into the recovery command prompt. bootrec /fixmbr bootrec /fixboot bootrec /rebuildBcd It worked and here I am now. The question is, how would I be able to dual boot windows 7 and Ubuntu 12.04 with this information? Thanks,

  Read the article

• Strange resolution on Ubuntu 11.10

  - by FSchmidt

  I only just installed Ubuntu 11.10, so excuse me if this question is silly ;-) I have a Fujitsu Esprimo Mobile V655, nvidia 8200 graphics, and recently installed Ubuntu 11.10 using wubi. I had to modify booting commands to include nomodeset; otherwise Ubuntu would not boot. Now I did set my screen resolution to 1280 x 720, which is the correct resolution for this screen. Still, the display seems imperfect. The font sizes seem unnatural(too large / stretched) and text is quite blurry (especially in Firefox). Could it have something to do withe the nvidia graphics driver and/or the nomodeset parameter? How can I fix this? Update: I used jockey-gtk to update nvidia to the current version. This improved the resolution dramatically (no blurriness, fonts are good). It also means that I no loger need to include nomodesetin the boot commands. However, other problems were brought up by this. It seems that certain files cannot be accessed - icon (images) are missing, some task bars are completely unstyled (grey, block-form, win97 style). I also get this error message(roughly translated from German, so may be slightly different from actual) every time I reboot: Could not apply the stored configuration for the monitor: none of the chosen modi is compatible with the available modi. I have tried nvidia-xconfig, unity --reset , no improvements. Can anyone help, please?

  Read the article

• Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

  Read the article

• certain files not syncing

  - by Josh

  I have UbuntuOne set up to sync a one folder with a number of subfolders. For some reason some of the subfolders have stopped syncing. Within one subfolder with 6 subfolders in it, some are showing up empty (they shouldn't be) and some are showing up with only some of the files they should contain. I have synced recently, and newer files are showing up in other subfolders. There's just some problem with these particular folders. They are not especially big nor do they have especially big files in them. Thoughts?

  Read the article

• How to change key binding for Tmux

  - by Severin

  I want to change the key binding in Tmux so I can use Ctrl + Alt instead of Ctrl + b This is my (unfortunately) not working try to do so. unbind C-b set -g prefix M-C What's wrong with this? Thought I followed the documentation for the keys.

  Read the article

• Display Problems running Ubuntu 12.04 in Windows VMware Player

  - by Alex Reynolds

  I am posting this again because I have changed to VMWare Player and I discovered something new. I am running Ubuntu 12.04 LTS (Guest) in VMWare Player 6.0.2 on Windows 7 64-bit Host. I have VMWare Tools installed properly. I am running MATE but the problem persists when I change (to and from) xfce, gnome, mate a-- and back again I had been using this for a couple of years without any graphics issues. After an Ubuntu update (typical) -- my video is corrupt and will not refresh correctly. My desktop icons are "mirrored" and when I open a terminal window (for instance) -- sometimes -- the window appears multiple times. Of course, only one is the real image. It seems to be a refresh problem. When I move an active window around the screen the "older" images "erase" and my icons (for instance) are in the correct location. For instance, I can move the terminal around a pretty corrupted window and the screen behind it is repainted correctly. NEW: Next, I got the idea to try and Remote Desktop in to the Ubuntu 12.04 LTS Guest OS from my Windows 7 64-bit Host. Once working, and connected via Win RDC -- using MATE as default in my /etc/xrdp/startws.sh -- my video is not corrupted and works fine (as in the past). Any ideas about what is going on ? or how to fix this ?

  Read the article

• Ubuntu won't load, freezes on purple screen

  - by kara

  Last time I restarted my computer, I could not get Ubuntu to load; the screen would either go black, or would hang at the purple screen indefinitely. I have had some graphics problems in the past, but had put 'nomodeset' after 'quiet splash' in the grub command line, which at least let Ubuntu load. That doesn't work now, and doesn't work if I remove it. I looked up some answers, such as this one: Purple start screen - no splash screen However, when I enter the root in recovery mode in grub, I always get errors when I run those command lines and it won't let me modify the files. Also, if I run in recovery mode and then choose 'resume normal boot', it will continue. But instead of getting a usual interface, I get a black screen that asks for my username and password. I enter these, and it tells me I'm in Ubuntu 12.04, but I'm still on a black screen with texts. It also informs me that there are updates to install. When I use the command 'sudo apt-get update', it starts to retrieve the information, but then the screen goes blank after a couple of seconds and I can't do anything anymore. Any ideas?

  Read the article

• Samsung driver for notebooks in Natty?

  - by burli

  Hi, I have a Samsung N150 Netbook and I installed Unity 11.04 to make some tests. But some functions do not work like backlight and vertical scroll on the touchpad. There are drivers for samsung notbooks and I know that there is a PPA. But not for Natty. Will the drivers be avalible some day in the kernel by default? Will Canonical add these drivers in the kernel, if the Kernel developers wont? I think this would be very usefull because Unity is great for Netbooks and Samsung Netbooks are really nice.

  Read the article

• Serious problem with mobile modems in UBUNTU to look [on hold]

  - by kitten 94

  I use mobile broadband using data card(modem) with simcard on ubuntu 14.04. My friends,relatives,boss used to make phone call to my sim on modem, & they get the ringsound on their phone but I cannot find any alert on ubuntu about the phone call. They think that I will call back to them & gets disappointed. Some even gets angry "that I am not attending the mobile call intensionally". They even do not not believe me,saying that computer can also pick a mobile call keeping mobile partner in their mind . Is there any way just to find out call & who it is call ? so that I can call to them later. or Is their any software like mobile partner to ubuntu to recive & make phone calls? Modem Manager GUI is helpful only just to send SMS, even USSD not works in it, inorder to receive SMS I have to close & open the windows repeatedly. please,please help me. Any help or ideas is thankful. Waiting for your's reply.

  Read the article

• Installing ubuntu 12.04 on macbook pro9,2

  - by stariz77

  I seem to have tried all the various suggested methods for installing ubuntu on a mbp, but can't seem to get anything that works and was wondering if anyone has run into any new problems with the latest non-retina models? I have a core i7 in my macbook, and model identifier is MacBookPro9,2. I have partitioned my HD using disk utility and have 700gig free space ready for the install (I haven't removed OSX Lion, it is still there in a 50gig partition). Problem: I am just getting a blank screen with a blinking cursor (unresponsive) in the top left whenever I boot from the disk. I left it for 20 minutes and nothing ever happened. This was without any boot manager, just holding "c" on startup. Attempted remedies: I have downloaded the 64 ubuntu iso from their site 3 times now and burned 4 separate discs to rule out some kind of corruption or burn error. I burned one in OSX Lion 10.7.4 and 3 on my windows 7 pc. I tried holding "alt" instead and then navigating to the windows disc to boot. Same thing happens, blank blinking unresponsive cursor. I also tried going to the EFI disc which actually brings up a menu (after saying "error prefix is not set") asking if I want to install ubuntu, test for errors or partition. All three options lead me to an unresponsive blank screen (some without cursors). I downloaded and installed rEFIt and if I hold "alt" on startup a linux penguin (Boot Linux from CD) appears in my boot options, along with the apple boot, and two others that I'm not sure of: "Boot EFI\boto\bootx64.efi from" and "Boot Legacy OS from". The "Boot Linux from CD" just takes me to the blank blinking cursor screen; again, I left if for 10+ minutes and nothing. I heard that the detection of the graphics card might be a problem and that I need change to nomodeset, but I have tried pressing F6 in all of the boot menus listed above and no options appear. Does anyone have any other suggested routes or can you see what I might have done wrong?

  Read the article

• Ubuntu Boot Slow - Late Drive Access

  - by Mo2

  So I just installed Ubuntu on a brand new Samsung 840 Pro SSD and have noticed that it is slower than expected. The LED access light doesn't start blinking until after 20 seconds or so have passed, after which the boot up seems to actually start. Does anyone have any ideas as to why this is happening? I have Windows 7 installed on a separate SSD and use Windows Loader as the main loader. Windows Loader points to GRUB2, from which I then start Ubuntu up. The 20 seconds count that I mentioned earlier starts AFTER I select Ubuntu 14.04.1 from the GRUB2 menu. Any help is appreciated. EDIT: I forgot to mention that I have only one partition for / and /home. I intend on using a shared NTFS drive for my documents and other personal files, so I had no need for the /home. I did not make a /swap since I have 12 GB of RAM. I also did not make a /boot since I was told that it's not really necessary in my case.

  Read the article

• Installed ubuntu over windows vista..cant reinstall windows

  - by Marcuz J Hinojoz

  I recently used the "compress hard drive" option within windows. i got the horid "boot mngr is compressed" after the restart. i tried booting my system back to windows vista but it doesnt read the cd that came with my computer. i tried going into system recovery and going back to a previous date but it didnt work. i kept pressing f8 but nothing. i installed ubuntu(the ubuntu cd worked but windows didnt?) i installed ubuntu so i could atleast get in my computer, and i still wasnt able to install windows from there. my hard drive got reformatted to a ext4? and windows cant install because it doesnt read it? im not sure, but its very frustrating. my computer is a gateway gt5668e windows vista home premium with sp1. im a graphic designer and use programs such as photoshop and cinema 4d to do my projects..i have been at a unfortunate halt with my work and i am really bummed out and dont know what to do... any help?

  Read the article

• My computer will not reboot after fresh install of ubuntu 12.04LTS

  - by user170715

  I bought a new computer yesterday and it came with Windows 8. When installing Ubuntu, i choose the erase and install option thinking that Ubuntu would install easily like it did for my old laptop... After a successful install and following the instructions telling me to reboot to finish installation and remove installation media. It worked and my computer booted fine, however once I began installing updates via update manager and activating additional driver {ATI/AMD proprietary FGLRX graphics driver (post-release updates)} out of the following: Experimental AMD binary Xorg driver and kernel module ATI/AMD proprietary FGLRX graphics driver (*experimental*beta) ATI/AMD proprietary FGLRX graphics driver (post-release updates) Then reboot to finish making changes I reboot and get an error (Reboot and select proper boot device) At this point I was stuck, so I eventually reinstalled ubuntu and repeated the exacted same steps until right before i rebooted to finish making changes. However this time i used this Boot Repair tool sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install -y boot-repair boot-repair After running the program i get a "boot successfully repaired" message. Then I try to reboot again and get the GNU Grub screen where it says would you like to boot: normal recovery memorytest Once it begins loading, you see the code moving across the screen then it pauses when it gets to and doesnt do anything. If someone could tell me how to fix this or get Windows 8 back soon, I'd appreciate it because like i said i just bought it yesterday and now i cant even use it.

  Read the article

• Can I expand my /boot without upsetting the system?

  - by Kaustubh P

  This is the current state of my partition table. As can be seen, the boot is very small, and I cant upgrade the kernel, because the update-manager tells me there isnt enough space on /boot :( Which effectively means that I cant update my kernel. Can I change the size of my boot, without necessitating a reinstall of either of the installed system? Filesystem Size Used Avail Use% Mounted on /dev/sda5 12G 4.9G 6.2G 45% / none 2.0G 284K 2.0G 1% /dev none 2.0G 8.5M 2.0G 1% /dev/shm none 2.0G 92K 2.0G 1% /var/run none 2.0G 0 2.0G 0% /var/lock /dev/sda3 42G 21G 22G 49% /media/Erste /dev/sda2 5.1G 2.5G 2.7G 48% /media/Swap /dev/sda1 30G 25G 4.9G 84% /media/Windows7 /dev/sda9 47G 28G 20G 60% /media/Zweite /dev/sda6 11G 7.6G 2.0G 80% /home /dev/sda8 49M 31M 16M 66% /boot

  Read the article

• How do I fix a terrible system error on ubuntu 12.04

  - by Anonymous

  I don't know what happened, but one day my computer had some sort of a system error and could no longer update itself. The software center will not open, it will begin to initialize and then a message pops up saying theres a system error and needs to shut down the software center. Then another box pops up after I go to report it saying it was unable to identify source or package name. I also can't extract a zipped folder to anything, or reinstall Ubuntu from a USB boot drive anymore, it keeps telling me my my computer isn't compatible when I know for a fact it is, because thats how I got Ubuntu on here in the first place. the only thing I know about this error is that a message popped up after I went to check for updates saying to report the problem and include this message in the report: 'E:malformed line 56 in source list /etc/apt/sources.list (dist parse)' it also called it a bug. I just want to know how to either get rid of the bug completely or find some way to be able to reinstall Ubuntu again. I know it's not a lot of information, but It's all I can give. Sorry.

  Read the article

• Ubuntu 12.04 Freezes w/ Ethernet Unplugged + Wireless Drops (Acer Aspire 5516)

  - by Grand Master T

  Ubuntu 12.04-12.10 32/64 freezes or won't boot if the Ethernet cable is unplugged and will not hold a wireless connection. Here is my scenario... Laptop: Acer Aspire 5516 Wireless card: Broadcom BCM4312 Ubuntu 12.04 32/64 Issues Unity 3d won't load without the Ethernet cable plugged in. If I let it load with Ethernet plugged in, it will freeze once I disconnect the cable. Unity 2d will load without the Ethernet cable plugged. In Unity 2d, wireless cannot hold a connection. I can connect to a Wireless network, but when I try to use it (i.e. open a browser), it disconnects. I can reconnect by disabling wireless (uncheck Enable Wireless), re-enable wireless, and reconnect. But, it will disconnect again once I start using it. Ubuntu 12.10 Issues Since 12.10 only gives me the option to load 3d (I assume), I experience the same thing as the first issue in 12.04. Attempted Solutions Enable networking/LAN in BIOS Set LAN first in boot priority in BIOS Remove STA wireless driver (bcmwl-kernel-source) and install b43 low power driver (firmware-b43-lpphy-installer). Remove default Network Manager and install Wicd. So far, I have had no luck with fixing this issue. Does anyone have any further suggestions?

  Read the article

• WiFi AdHoc Network: Unable to access peer by ip

  - by Pranav

  I've set up a WiFi AdHoc network in Maverick and selected the IPv4 settings as "Shared to other computers". On the client computer, I joined the network with the same SSID and set IPv4 method to Manual and I gave it an IP 10.42.43.2 (As on the first computer, the auto generated IP was 10.42.43.1). From either of the computers, I'm not able to access the other using the IP (in browser). Any idea why? (If I browse to 10.42.43.1 from the first computer, it works) Thanks!

  Read the article

• Why when I log in my two screens shows the same image automatically?

  - by forellana

  When I log in on my computer, first my two monitors shows their own part of a larger desktop, then automatically changes to the same image on both screens, but I don't want to happen this, Is there any configuration to avoid this? About my hardware: 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09)

  Read the article

• Black login screen Ubuntu 12.04 if WGA cable pluged in on reboot

  - by Sulliwane

  I'm using Ubuntu 12.04.1, 64 bits, installed on a Z77 Pro4 (ASrock motherboard), crucial M4 SSD drive (sata 3), and intel i5 3570k (ivy bridge). I have this annoying problem : When I startup the computer, I get a CLI login prompt : At this moment, if I press enter, i get the usual CLI login prompt. If not, here is what I get : From now, if I login using CLI, i identify the lightdm processus, kill and start it : #ps -A | grep lightdm #sudo kill -9 1273 #sudo lightdm and miracle, these commands bring back the gui login screen. BUT It's very annoying as I have to repeat these steps at every boot, and the people using this desktop are not familiar with linux at all! So I tried to figure out the cause and here is what I found : If, when I shutdown the computer, the WGA cable is not pluged in, then Ubuntu will boot on GUI login screen without a glitch! But If the WGA cable is pluged in when shuting down, I will get CLI login prompt... Note 1: I installed linux kernel 3.4, but it hasn't solve the problem. Note 2: Is it linked to the new HD 4000 integrated graphic processor ? Note 3: If i boot on an USB stick (Ubuntu 12.04), NO problems ! Note 4: If booting on the SSD, when clicking "shutdown" button, the shutdown process never ends up (logout screen keep displaying and fans are still rolling). But if booting on USB stick, the shutdown action runs properly.

  Read the article

• Ubuntu doesn't start and I can't login

  - by Meph00

  My ubuntu 13.04 doesn't boot anymore. Eternal black screen. If I press ALT+CTRL+F1 I see that it's stucked on "Checking battery state [OK]." I'd like to try to go with sudo apt-get install gdm but I can't login on terminal tty2, tty3 etc. They correctly ask for my nickname, then they make me wait a lot, ask for password and make me wait again. After a lot of time (... a lot) the best I could achieve was visualizing "Documentantion https://help.ubuntu.com". I can never reach the point where I can give commands. Plus, during the long pauses, every 2 minutes it gives a messagge like this: INFO: task XXX blocked for more than 120 seconds. Any suggestion? Sorry for my bad english and thanks everyone for the attention.

  Read the article

• Restoring two finger middle click again

  - by Thomas A.

  it used to be that tapping two fingers on the touchpad send a middle mouse click. Now it does a right click and three fingers now are the middle click. I really can't understand the change and think it is a bug or badly copied from Apple or something. The reasoning escapes me totally. I use middle click to open links in a new tab in the browser all day and I rarely use right click (and I have a right mouse button below the touchpad, doh) Tapping three fingers on my tiny EeePC touchpad is next to impossible so I want the old behavior. I found: synclient TapButtons2=2 synclient TapButtons3=3 but that did not work on 10.10 Does anyone know how to restore sane behavior?

  Read the article

• Unable to Restore Nexus 7 2013

  - by belkinsa

  I have a Nexus 7 2013 with FLO-04.01 bootloader and I tired ./flash-all.sh and it fails. Happens every time. Output below: svetlana@svetlana-TECRA-M5:~/Downloads/razor-krt16s$ sudo ./flash-all.sh [sudo] password for svetlana: < waiting for device > sending 'bootloader' (3911 KB)... OKAY [ 0.163s] writing 'bootloader'... OKAY [ 1.446s] finished. total time: 1.609s rebooting into bootloader... OKAY [ 0.006s] finished. total time: 0.006s archive does not contain 'boot.sig' archive does not contain 'recovery.sig' failed to allocate 721539744 bytes error: update package missing system.img svetlana@svetlana-TECRA-M5:~/Downloads/razor-krt16s$

  Read the article

• Booting Ubuntu 12.04 from external eSATA disk

  - by Lord of Scripts

  This is my system topology: Disk #1 (SATA Internal) C: D: (Windows 7 Ultimate) Disk #2 (SATA Internal) E: (Windows Backup) Disk #3 (eSATA External) H: I: (Other windows data) /dev/sdc3 Linux Swap /dev/sdc4 Extended partition /dev/sdc5 Linux / So, I originally had there Ubuntu 8.1 from years ago but never got to use it. Now I used the Ubuntu 12.04 Live CD to install on that same location (That live CD takes a century to boot on a 6GB Intel i7 system...). The installation went fine, I selected it to install on /dev/sdc5 but it never asked me for any boot stuff, where I wanted to install Grub or whatever it is that it uses nowaways (I come from the LILO days when it always worked :-) So, yet again I can't access my new Linux installation. I have to wait a century to boot the "Live" CD and it allows me to see my new installation but I can't do anything with it. I tried the approach of this blog post. Copied the linux.bin of /dev/sdc5 into C: and used the BCDEdit steps to declare the new OS. So when I boot I see the Windows Boot menu and select Linux and after than I only get a black screen with a blinking cursor on the upper left. I can boot into Windows though. So, perhaps it didn't install the boot code on /dev/sdc5? I used this setup years ago booting from Windows with a BIN file: dd if=/dev/sdc5 of=/mnt/share/C/linux.bin bs=512 count=1 I am very reluctant to run GRUB because years ago I did and it wiped out my Windows boot sector and took quite some effort to recover it and be able to boot Windows again. I have been trying to install GRUB on a blank USB stick but I can't find anything clear enough. My system does NOT have a floppy. So can someone give me some ideas about how to get control of my Ubuntu 12.04 installation?

  Read the article

• How to customize live Ubuntu CD?

  - by karthick87

  I would like to customize Ubuntu live CD by installing some additional packages. I have followed this link but it doesn't seems to work. Can anyone provide clear instructions? Thanks in advance! Customization Packages that I want to install: Thunderbird Samba SSH Changes that I need: Remove Games menu from the Application menu Firefox shortcut on desktop Radiance as the default theme Different default Ubuntu wallpaper Note I do not prefer Remastersys, manual way will be appreciated. updates I want the panel to be placed at the bottom. I want to paste my samba configuration file instead of default samba configuration. And i have few firefox shortcuts and Folders, i have to show that in Desktop. Also it will be nice if you say me how to change the icon sets. Recent Updates I have customized ubuntu 10.10 with firefox shortcuts and few folders on desktops. Everything went smooth. But the installer gets crashes after choosing the timezone. How do i fix this issue? Also setting wallpaper affects the login screen. The wallpaper which i set is displayed on the login screen also. I just want the default one for the login screen.

  Read the article

• Used mountmanager now Ubuntu hangs on boot

  - by fpghost

  I was using MountManager in Ubuntu 12.04 to set user permissions in mounting hard drives. I set each partititon to be mountable by everyone instead of admin only. Then I clicked Apply in the file menu and it gave me the message successfully updated. Upon restarting Ubuntu, just hangs on the splash screen and does not boot any further. Windows still boots fine. How can I fix these? please help thanks From LiveUSB: my fstab looks like: overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda5 swap swap defaults 0 0 /dev/sda7 swap swap defaults 0 0 Is this corrupted? Other things that may be helpful: blkid returns /dev/loop0: TYPE="squashfs" /dev/sda1: LABEL="System Reserved" UUID="0AF26C31F26C22E5" TYPE="ntfs" /dev/sda2: UUID="5E1C88E31C88B813" TYPE="ntfs" /dev/sda3: UUID="94B2BB7DB2BB6282" TYPE="ntfs" /dev/sda5: UUID="41b66b9a-2b48-45cf-b59d-cd50e41ec971" TYPE="swap" /dev/sda6: UUID="c73ca79e-4fa4-4bde-967e-670593736f6a" TYPE="ext4" /dev/sda7: UUID="c05d659f-103c-4444-9dc4-3121b9e081d6" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="1DE8-0A49" TYPE="vfat" and cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=1950000k,nr_inodes=206759,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=783056k,mode=755 0 0 /dev/sdb1 /cdrom vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,erro rs=remount-ro 0 0 /dev/loop0 /rofs squashfs ro,noatime 0 0 tmpfs /cow tmpfs rw,noatime,mode=755 0 0 /cow / overlayfs rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 gvfs-fuse-daemon /home/ubuntu/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=999,group_id=999 0 0

  Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >