Search Results

Search found 16415 results on 657 pages for 'computer'.

Page 197/657 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

• Graphics Card Compatability

  - by Aaron

  I am a first time builder and while I have the basic understanding of how to put a computer together, one final thing eludes me. What are the requirements for instaling 2 or more graphics cards on a computer? Example: EVGA 015-P3-1589-AR GeForce GTX 580 (Fermi) FTW Hydro Copper 2 1536MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card ECS NGTX580-1536PI-F GeForce GTX 580 (Fermi) 1536MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I am not planning on buying either of these cards in the near future. I simply am using them as an example because of the number of differences. As I understand it these two cards will work together (given the proper motherboard) because the only thing that matters is that they are both GeForce GTX 580. Is my assumption correct? If not, why?

  Read the article

• linux recommendations for older pc

  - by jdamae

  Hi, I'm new to Linux and I am interested in installing the OS on an older computer I have. I want to setup a webserver and install php, perl. My pc is an older HP Pavillion a255c, Intel Pentium 4 with 512ram. I will probably add some more memory later. This pc is more like a sandbox than anything, but would like to get quickly started with the OS. Is there a particular flavor of linux I would need to download based on my older computer? Any recommendations? I was thinking about Ubuntu but not sure what version to go with. Thanks for your help.

  Read the article

• What are the options for retraining formally as a software engineer?

  - by Matt Harrison

  I'm a self-taught programmer. I have a good undergraduate degree in Architecture (building, not software). I was always a science/maths kid and got consistency good grades in these subjects. However I became indecisive at undergraduate level and switched between Physics, Chemistry, Art and finally stuck with Architecture mainly out of the desperate need to finish any degree. As soon as I graduated, I ditched architecture and started writing code again professionally. I've been a programmer now for 3 years and I've progressed very quickly. I'm ambitious and I want to work for the top companies in this field at some point and I've realised I need a Computer Science education to be taken seriously (based on job ads for the big tech firms). I've applied for a few MSc programs in Computer Science but they've all rejected me because of my BA. It's just not an option for me to quit my job and go back and do another 3 year undergraduate degree in CS. I know I can study at this level because I've read most of the books on the reading lists for CS courses in the UK that I can find and I have this knowledge now, it's just I can't prove it on an application form. What options are available to me?

  Read the article

• How to switch to a generic kernel in a headless Ubuntu Server 12.04?

  - by chmike

  I just got a dedicated server with Ubuntu 12.04 installed with a custom compiled kernel. Since I would like to install VirtualBox and this custom kernel doesn't support dynamic module loading (for security) I need to change the kernel. I'm running some Ubuntu servers for years but never palyed with grub and a headless computer. When the command update-grub is run it shows the different kernel it finds. Here is what I see Generating grub.cfg ... Found linux image: /boot/bzImage-3.2.13-xxxx-grs-ipv6-64 Found linux image: /boot/vmlinuz-3.2.0-34-generic Found initrd image: /boot/initrd.img-3.2.0-34-generic No volume groups found done The first one is the active one as seen with uname -r. To me it looks like the second kernel is the one I should use. But I don't know how to configure grub2 to use it. The computer is also configured with a software RAID using mdadm I guess. Never used that before. I don't know if playing with the grub of changing kernel could brake this. What must I do to set the generic kernel as the default one so that I can get VirtualBox running.

  Read the article

• crippling repeating "pciehp card not present" notifications

  - by Nanne

  When using ubuntu (12.04, both installed and on a live usb) I get a lot of these messages: pciehp 0000:00:1c.5:pcie04: Card not present on Slot(37) pciehp 0000:00:1c.5:pcie04: Card present on Slot(37) And with a lot I mean about 20 per second. This has a crippling effect, and I would like to get rid of it :) The computer is a packard bell easynote BG48-U-100 DC. I tip I picked up from some fedora/redhat error here was to look at lspci -vnn. I have pasted the part about "00:1c.5" here: http://pastebin.com/0sfsiqW2 For what good it may do, here is the lsmod of my machine: http://pastebin.com/DQZy1kAL From that first pastebin I think to conclude that it has to do with the module shpchp, which seems to me (aka: google) to have something to do with ACPI. That's as far as I've come in disecting this. Can anyone help me along further? What can I do, check etc? I did see this topic but my intentions are not to surpress the error message: I know how to do this (from that topic ;) ), but I'm looking for a real sollution. Finding the problem on the internet does suspect me to believe it is neither an ubuntu specific nor a packard-bell specific problem.If you google the problem it seems that is present on several other distribution/hardware combo's as well, and it looks like the advice is to remove one of the drivers? I have no clue as to which driver I should look at and and what would be the effect of just removing it. I have seen this topic which is old-ish, but describes my problem and is about a similar computer. The solution in this topic was to compile a new kernel using a spanish guide, which seems a bit extreme to me, so I'm kinda hoping for a better solution than that.

  Read the article

• Screen is black at login screen if display driver is enabled

  - by Amir Rachum

  I have a Lenovo x200 and recently its screen didn't work, so I took it to a repair lab. The guy told me they replaced the screen inverter. I powered up the laptop and the ThinkPad logo was shown, so I was happy. When I got home the computer would boot up, then instead of the logon screen, I got a black screen. Went to safe mode, disabled the display adapters, reset the computer, and I got a clean boot. Then I tried to reinstall the drivers, and it just led to the same condition. My video card is (from device manager): Mobile Intel(R) 4 Series Express Chipset Family. Now my laptop works as I'm working with display drivers disabled, but without display drivers I can't watch movies, etc. Any solution to this problem? Edit: I plugged in an external monitor and it works on it with display drivers enabled. However, it does not find the laptop monitor.

  Read the article

• how to restore grub

  - by takeshin

  During copying files via lan my Ubuntu Server 10.04 hung up and I had to reset the computer. After reboot, I got: Grub error 17, so I tried the rescue alternate CD, but I got a info, that no partitions were found on the disk. I used testdisk to restore the partitions. Using fdisk -l shows the partitions now, but when the system boots up I does nothing but displays: L234: When I plug the drive to another computer, it is not automatically mounted and I can't access the data. What to do now? How to restore the grub and boot up the system?

  Read the article

• Port forwarding not working?

  - by rphello101

  I'm trying to set up an Apache Server to be accessed publicly. I'm using a Netgear R4500 router hooked up to a Motorola SB6121 modem. I can access my server on my computer by typing in my IP address. After following the instructions to forward port 80 so I can access the server from other computers, it does not work (see image). I get "This webpage is not available". I am forwarding to the IP address of my computer. Using this Network Port Scanner Tool, it says "80/tcp filtered http", which, as I understand it, means forwarding did not work correctly. In my Apache httpd file, I have: ServerName 192.168.1.13:80 and Listen 192.168.1.13:80 Anyone know what's wrong or have something I can try? click to enlarge

  Read the article

• What You Said: How You Share Your Photos

  - by Jason Fitzpatrick

  Earlier this week we asked you to share your favorite tips, tricks, and tools for sharing photos with friends and family. Now we’re back to highlight the ways HTG readers share their pics. Image available as wallpaper here. By far the most popular method of photo sharing was to upload the pictures to cloud-based storage. Many readers took advantage of sizable SkyDrive accounts. Dragonbite writes: I used to use PicasaWeb (uploaded from Shotwell) until I got the SkyDrive w/25 GB available. My imported pictures are automatically synchronized with SkyDrive and I then send out a link to whomever I want. I have another (desktop) computer where all of the pictures are stored from mine and my wife’s camera’s imports so if I need to free up some space on SkyDrive or my Windows 7 laptop, I double-check they are in the desktop computer before deleting them from my laptop (and thus from SkyDrive as well). I wish SkyDrive enabled some features like rotate, or searching by Tagged person. 8 Deadly Commands You Should Never Run on Linux 14 Special Google Searches That Show Instant Answers How To Create a Customized Windows 7 Installation Disc With Integrated Updates

  Read the article

• DIY Halloween Decoration Uses Simple Silohuettes

  - by Jason Fitzpatrick

  While many of the Halloween decorating tricks we’ve shared over the years involve lots of wire, LEDs, and electronic guts, this one is thoroughly analog (and easy to put together). A simple set of silhouettes can cheaply and quickly transform the front of your house. Courtesy of Matt over at GeekDad, the transformation is easy to pull off. He explains: It’s really just about as simple as you could hope for. The materials needed are: black posterboard or black-painted cardboard; colored cellophane or tissue paper; and tape. The only tools needed are: measuring tape; some sort of drawing implement — chalk works really well; and scissors and/or X-Acto knife. And while you need some drawing talent, the scale is big enough and the need for precision little enough that you don’t need that much. For a more thorough rundown of the steps hit up the link below or hit up Google Images to find some monster silhouette inspiration. Window Monsters [Geek Dad] How Hackers Can Disguise Malicious Programs With Fake File Extensions Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer

  Read the article

• Windows 7 unload driver/disconnect usb before restart

  - by brux

  In xp, my Tascam US 122 usb audio interface works fine. On my windows 7 computer the device works, however when i restart/shutdown it hangs at the "shutting down" screen forever. If the usb cable is removed prior to initiating restart/shutdown then everything goes fine, the computer restarts as normal. This is a known problem, running any other driver in compatibility mode doesnt fix the problem. Is there a method I can use to unload the device/drivers so that I dont have to reach round physically and disconnect the cable. Somebody suggested a spdt switch on the cable itself, but I am looking for a simpler method. Surely I can automate the unloading of the device through a script or such? Any ideas are greatly welcomed thanks

  Read the article

• XP can't read data from transferred HD

  - by Alexander Miller

  Computer A, running XP, died. XP was installed on a fresh HD in computer B. Slaved data-backup HD from A was installed as slave on B. B will not read it; shows only 2 folders, Recycler and System Volume Info. All of these are older machines with IDE drives. What's going on & how can I read/transfer the data from the transferred drive? This was only a trial run. Actually I will need to transfer the master HD from A - which has XP on it - and read from its data partition because (blush) the backup drive was not up to date.

  Read the article

• How can I keep gnu screen from becoming unresponsive after losing my SSH connection?

  - by Mikey

  I use a VPN tunnel to connect to my work network and then SSH to connect to my work PC running cygwin. Once logged in I can attach to a screen session and everything works great. Now, after a while, I walk away from my computer and sooner or later, the VPN tunnel times out. The SSH connection on each end eventually times out and then I eventually come back to my computer to do some work. Theoretically, this should be a simple matter of just restarting the VPN, reconnecting via SSH, and then running "screen -r -d". However apparently when the sshd daemon times out on the cygwin PC, it leaves the screen session in some kind of hung state. I can reproduce a similar hung state by clicking the close box on a cygwin bash shell window while it's running a screen session. Is there any way to get the screen session to recover once this has happened, so that I don't lose anything?

  Read the article

• What happens when you add a Graphics card to a i7 with build in graphics (e.g. HD 4000)

  - by Matt

  I'm thinking of upgrading my computer from an AMD Phenom II X4 955BE with a AMD Radeon HD 6800 Graphics card (not integrated) to using a Intel Core i7 3770. As I have no knowledge of integrated graphics, my question is, what happens to the computing power when not using the HD4000 integrated graphics of the CPU (does it mean the CPU will run faster then it would if I relied on it?) Also what is better the CPUs inbuilt HD4000 or my Radeon Graphics card? I am mostly interested in terms of content creation: Using Adobe After Effects, 3D Rendering etc. Not too bothered about gaming performance. I will be using the spare parts of this build and older systems to make a second computer for network renders so what will be the advantages of keeping the Radeon with the current system for that?

  Read the article

• Error when adding to the domain : the specified server cannot perform the requested operation

  - by James

  When we add computers to the domain in Windows 7, we get the error: Changing the Primary Domain DNS name of this computer to "" failed. The name will remain "domain.com". The error was: The specified server cannot perform the requested operation. This happens on multiple computers and retrying yields the same result. Despite the error, the computer is still able to login to the domain ok. The DCs are windows 2003. Has anyone found a way to get rid of this error? Any help is appreciated.

  Read the article

• How to debug lack of sound in Asus EEE PC

  - by Kalmar

  I have an Asus EEE PC 1225B with fresh Lubuntu 12.04. And no sound. It doesn't seem to be some common problem, so I have to make some research what's up. I tried running alsamixer, so I know I have Realtek ALC269VB with nothing muted unexpectedly. What can I do next to identify and solve the problem? Additional info: alsamixer shows two cards: HD-Audio Generic and HDA ATI-SB (Realtek ALC269VB); the first one is muted. ~$ aplay ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave aplay: main:682: blad otwierania audio: Nie ma takiego pliku ani katalogu The Polish part can be translated as "error opening audio: There is no such file or directory". ~$ sudo lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> -- 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• Odd internet packet routing

  - by NachoChip

  I want to know is there anyway to explicitly control the packet routing. I try to connect my computer in HK from San Francisco. It is extremely slow and I use tracert to see what is going on. It seems the packet get routed from HK to Europe and then to New York and then to San Francisco. In US, I am using Astound Cable. Is there any suggestion I can force the packet to not go around the world before it reach my computer? Or it is all ISP dependent?

  Read the article

• Can't connect to IIS7 on one of my machines

  - by user38974

  Hello, I have 2 computers, both running Win7 Professional x64. Computer "A" (192.168.0.10) is my work machine, it contains my tools etc. Computer "B" (192.168.0.15) is supposed to be my build server / web server for my projects I've installed IIS on "B", and installed IIS7 remote manager on "A". I'm trying to connect from A's IIS7 Manager to B's IIS but I fail. I have little knowledge of IIS, and I feel that's the main reason. I can ping B from A and get positive results so the machines do see each other. A and B are in the same workgroup but not in a domain (if that matters) - they're in my home network. What do I need to do to "see" B's IIS?

  Read the article

• How to configure DD-WRT routing table when creating an isolated network segment for PCI C VT compliance

  - by tetranz

  I'm the volunteer support and system admin person at a small private school. We need to setup a PCI compliant Windows PC as a virtual terminal for credit card processing. I've read questionnaire SAQ C-VT and, to quote, this computer needs to be accessed: "via a computer that is isolated in a single location, and is not connected to other locations or systems within your environment (this can be achieved via a firewall or network segmentation to isolate the computer from other systems)" Our setup is as follows: DSL modem from ISP is setup to be a "transparent pipe" with no extra services. That goes into the WAN port of Linksys WRT54-GL running a DD-WRT. The LAN is 192.168.1.x. There are a couple of other WRT54-GL / DD-WRT devices. One is used as a wireless AP and another is a client bridge. To isolate the VT (virtual terminal) machine, I have another DD-WRT device. Its WAN is connected to a port on the 192.168.1.x LAN. The virtual terminal machine is connected to its LAN which is at 192.168.10.x. The SPI Firewall etc is turned on. It's basically the default DD-WRT gateway setup where the "ISP" is our own LAN. That's working. All incoming traffic to the VT machine is blocked, including from our own LAN. The VT can access the internet BUT, and here's the problem, it can also ping any of the computers on the 192.168.1.x LAN. I think I need to stop that. I'm guessing that I could do something with the Static Routing table in the VT machine's DD-WRT device. I need to route anything going to 192.168.1.x other than the gateway which is 192.168.1.1 to 0.0.0.0 or something like that. That's where I'm stuck at the end of my knowledge. Or ... do I need to get yet another DD-WRT so the network is "balanced". Maybe I need to have the internet from the DSL going into a DD-WRT which has only two devices on its LAN i.e., two other DD-WRTs, one for the main LAN and one for the VT. I think that would do but I'd like to avoid the extra cost and complexity if I don't need it. Thanks

  Read the article

• Can I use a cheap inverter for my laptop?

  - by Georg

  I'm going to travel in a car this summer. It would be very nice if I could charge my laptop using the cigarette lighter. Because my computer is from Apple, there's no way to directly connect the two, therefore I need an inverter that provides 120V alternating current. There are many different models, ranging from very cheap to really expensive. The wave forms are: (from most expensive to cheapest) sine modified sine trapezoid square Can I use just any inverter or does it have to be a sine inverter? If so, what happens to my computer in case I use the wrong one. The laptop is a MacBook witch needs 60W.

  Read the article

• Sync Banshee library data.

  - by Dom

  I use Banshee to organise my music, I particularly like its scoring system and I have smart playlists based on it. However, I have two versions of my music library, one on each of my computers. As one of the computers is small I only have a favourite set of songs on that computer rather than my whole collection. The computers are not on a local network, but I do use Ubuntu One for file sharing between them. Is there any way I can synchronise song data (play count, score, skip count ...) and playlist data (including smart playlists that include songs based on this data) between the two computers? This would only be relevant of course for the songs that exist on both computers, the songs that exist on only one would need to be ignored. I did consider putting the library data file (I think it is .xml but I'm not sure) into the shared file and creating a symbolic link to it, but then I wouldn't be able to have a different set of songs on each computer. Thank you.

  Read the article

• Is there a specific name for the ".\" (dot-slash) shorthand used to log onto a Windows machine?

  - by HopelessN00b

  I guess the title just about says it all. And yes, .\, not that obsolete \. thing. :) For those who don't know, .\ is a shorthand way of saying "this computer" in Windows at a logon screen, which comes in very handy when you don't know or care about the local computer name but need to authenticate against it anyway, such as through RDP or scripting against a set of shared local users and passwords or even locally, if you're unlucky enough to have to physically go to a machine. Anyway, does this have an actual name, and if so, what is it? I feel kind of stupid saying the dot-slash thing, which is how I've been referring to this.

  Read the article

• TV network capabilities.

  - by Narcolapser

  Question: Can the major TV producer's internet TV systems access network resource? Info: I'm looking for large TV's right now for my company to set up in conference rooms. We want the ability to load presentations with out having to have a computer to do so. Our hope is to put things on to network drives and access and display them from there. I've heard that LG's can do this if you convert the power point file in to a show format. that's fine. I just need to get this information to the TV with out the computer attached. Can anyone tell me if companies like LG, Vizio, Sony, Samsung, etc. have TV's that are capable of doing this? Thanks ~n

  Read the article

• Using 4 monitors with 2 generic video cards... possible?

  - by Ikram

  I'm thinking of setting up 4 monitors in a grid, using two video cards, one card to feed each pair of monitors through the card's two DVI ports. The most important requirement for me is to have the grid of monitors act as one single huge screen. Is this scenario possible by using two generic cards like Radeon 4870s on a Windows 7 computer? (I've heard of Eyefinity, but 4870s don't have it) Another issue is that I only have one PCI-Express slot on my computer's motherboard, therefore I'll need to use one of the lesser PCI cards as the second video card. Will this pose problems?

  Read the article

• identifying windows service

  - by András

  On my win7 machine when I watch a movie in XBMC, once per hour the desktop regains the focus. The movie keeps playing, but in the background now, so I can only hear it. It is quite irritating. I noticed, that the Windows Application log always contains two entres for this time: "The description for Event ID 0 from source Self-service Plug-in cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer." One entry is for starting, and one for stopping 60 seconds later. This keeps repeating, every two starts 3600 seconds apart. How can I repair it? How can I find out which service it is?

  Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >