Search Results

Search found 41497 results on 1660 pages for 'fault'.

Page 198/1660 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

• Unable to access local network when Cisco VPN client is connected

  - by bryanroth

  I'm a developer and don't have much networking expertise, so bear with me. I'm using the Cisco VPN Client 5.0.02.0090 to connect to my work's VPN that way I can RDP into my work computer. Once connected, I can't ping anything on the local network once connected to the VPN thus I am unable to access my work's network. This used to work about two weeks ago but abruptly stopped working today. However, I have the Cisco VPN Client installed on my laptop and I am able to ping and RDP into my work computer from there. Both my desktop and laptop computers are connected to the same router at home. I have tried the following so far: Rebooted my computer Reinstalled VPN client Updated NIC drivers Disabled firewall Opened up ports 500, 4500, and 10000 Any help would be much appreciated. Thanks!

  Read the article

• Error with postgres and Rails in Bundle Install on Ubuntu 12.10

  - by jason328

  I'm trying to install postgres onto Ubuntu. When running the Bundle Install in terminal I'm receiving this message at the end of the running code. How do I get pg to install properly? Libpq-dev is installed as well. Using coffee-rails (3.2.2) Using diff-lcs (1.1.3) Using jquery-rails (2.0.2) Installing pg (0.12.2) with native extensions Gem::Installer::ExtensionBuildError: ERROR: Failed to build gem native extension. /usr/bin/ruby1.9.1 extconf.rb checking for pg_config... yes Using config values from /usr/bin/pg_config checking for libpq-fe.h... yes checking for libpq/libpq-fs.h... yes checking for PQconnectdb() in -lpq... yes checking for PQconnectionUsedPassword()... yes checking for PQisthreadsafe()... yes checking for PQprepare()... yes checking for PQexecParams()... yes checking for PQescapeString()... yes checking for PQescapeStringConn()... yes checking for PQgetCancel()... yes checking for lo_create()... yes checking for pg_encoding_to_char()... yes checking for PQsetClientEncoding()... yes checking for rb_encdb_alias()... yes checking for rb_enc_alias()... no checking for struct pgNotify.extra in libpq-fe.h... yes checking for unistd.h... yes checking for ruby/st.h... yes creating extconf.h creating Makefile make compiling compat.c compiling pg.c pg.c: In function ‘pgconn_wait_for_notify’: pg.c:2117:3: warning: ‘rb_thread_select’ is deprecated (declared at /usr/include/ruby- 1.9.1/ruby/intern.h:379) [-Wdeprecated-declarations] pg.c: In function ‘pgconn_block’: pg.c:2592:3: error: format not a string literal and no format arguments [-Werror=format- security] pg.c:2598:3: warning: ‘rb_thread_select’ is deprecated (declared at /usr/include/ruby- 1.9.1/ruby/intern.h:379) [-Wdeprecated-declarations] pg.c:2607:4: error: format not a string literal and no format arguments [-Werror=format- security] pg.c: In function ‘pgconn_locreate’: pg.c:2866:11: warning: variable ‘lo_oid’ set but not used [-Wunused-but-set-variable] pg.c: In function ‘find_or_create_johab’: pg.c:3947:3: warning: implicit declaration of function ‘rb_encdb_alias’ [-Wimplicit- function-declaration] cc1: some warnings being treated as errors make: *** [pg.o] Error 1 Gem files will remain installed in /home/jason/.bundler/tmp/10083/gems/pg-0.12.2 for inspection. Results logged to /home/jason/.bundler/tmp/10083/gems/pg-0.12.2/ext/gem_make.out An error occurred while installing pg (0.12.2), and Bundler cannot continue. Make sure that `gem install pg -v '0.12.2'` succeeds before bundling.

  Read the article

• Server Hangs on booting grub, Just displays "GRUB C"

  - by Muahmmad Zeeshan

  Hi I have install oracle linux 4.5 on server twice but having same problem. The server hangs on booting just displays "GRUB C" i don't know why is it happening. Please advice is it the drive issue.

  Read the article

• How do you get the VMWare vSphere client to work on Windows 7 RC?

  - by Keith Sirmons

  Howdy, When trying to connect to a ESXi server using the VMWare vShere Client I get an error: Error parsing the server "server" "clients.xml" file. Login will continue, contact your system administrator. Followed by: The type initializer for 'VirtualInfrastructure.Utils.HttpWebRequestProxy' threw an exception. Any clues to fix this? Windows 7 x64 RC Build 7100 vSphere client from ESXi 4.0.0 ReleaseBuild-171294 Thank you, Keith

  Read the article

• FTPS SSH Host Key after IP Address Change

  - by David George

  I have a Secure FTP (FTPS) server that my remote sites to upload files to daily via scripted routines that run. I have had issues in the past when upgrading hardware and deploying new servers causing the RSA Fingerprint to change for that server. Then all my remote sites can't connect until I have the old key removed (usually via ssh_keygen -r myserver.com). I now have to change the IP address for myserver.com and I wondered if there is anyway to proactively generate new host keys so that when the server address changes all my FTPS client remote sites don't break?

  Read the article

• The proxy server received an invalid response from an upstream server

  - by chandank

  I have tomcat server behind the apache. I am using mod_ssl and reverse proxy to the tomcat. All are running at default ports. The full error is as follow. ack Proxy Error The proxy server received an invalid response from an upstream server. The proxy server could not handle the request POST /pages/doeditpage.action. Reason: Error reading from remote server If I clean the browser cache the error goes away and comes back after few attempts. I test the same on Chrome/Firefox/IE on Windows platform. Wondering it works perfectly on Linux based Chrome/Firefox. I googled a lot there are few answers at stack overflow but I am not able to find my answer. Is this a server side problem? because so many browsers cant be wrong at same time on Windows.

  Read the article

• JAWStats statspath error on windows

  - by crosenblum

  I have AWStats which works fine, and JAWStats I am trying to get working. I have tried back and forward slashes to get the program to read the dirdata files. I even moved the folder of dirdata outside of program files folder, in case it had problems with folder names with spaces in them. Here is my config file. // core config parameters $sConfigDefaultView = "thismonth.all"; $bConfigChangeSites = true; $bConfigUpdateSites = true; $sUpdateSiteFilename = "xml_update.php"; // individual site configuration // awstats092012.noname.jumpingcrab.com.txt $aConfig["site1"] = array( "statspath" => "C:\\Program Files\\AWStats\\DirData\\", "statsname" => "awstats[MM][YYYY].yourexample.com.txt", "updatepath" => "C:\\Program Files\\AWStats\\wwwroot\\cgi-bin\\awstats.pl\\", "siteurl" => "http://yourexample.com", "theme" => "default", "fadespeed" => 250, "password" => "", "includes" => "" ); Domain names changed to protect the innocent...:P Here is the error message: An error has occured: No AWStats Log Files Found JAWStats cannot find any AWStats log files in the specified directory: C:\Program Files\AWStats\DirData\ Is this the correct folder? Is your config name, site1, correct? Please refer to the installation instructions for more information.

  Read the article

• HAProxy: session stickiness triggered by response header possible?

  - by zoli

  I'm investigating HAProxy as a possible replacement for F5. F5 is capable of persisting a session based on a response header value: when HTTP_RESPONSE { set session [HTTP::header X-Session] if {$session ne ""} { persist add uie $session } } and then route all subsequent requests which contain the same session ID in a header, query parameter, path, etc. to the same machine, eg: when HTTP_REQUEST { set session [findstr [HTTP::path] "/session/" 9 / if {$session} { persist uie $session } } I'm wondering if this is even possible to do with HAProxy?

  Read the article

• Please help with System.Runtime.InteropServices.SEHException: External component has thrown an excep

  - by Brandon

  My aspx page gives me this error sometimes: External component has thrown an exception. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.SEHException: External component has thrown an exception. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SEHException (0x80004005): External component has thrown an exception.] Luxand.FSDK.Initialize(String DataFilesPath) +0 WebService.onLoad() +70 WebService..ctor() +91 facematch.Page_Load(Object sender, EventArgs e) +50 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +47 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1436

  Read the article

• Mouse scroll wheel in Citrix

  - by molecule

  Hi all, One of my users is experiencing a problem whereby the mouse scroll does not work on the Citrix published application. I have tried to install mouse drivers on his local PC as well as swapping the USB with a PS/2 mouse but still no go. I have researched this issue for a few days but have not been able to find a fix. PC is running Windows XP and ICA client is version 10 I am pretty sure its a problem local to that PC since every other user using the application published on the same server are not having any issues. What could it be?

  Read the article

• Subversion 1.6 + SASL : Only works with plaintext 'userPassword'?

  - by SiegeX

  I'm attempting to setup svnserve with SASL support on my Slackware 13.1 server and after some trial and error I'm able to get it to work with the configuration listed below: svnserve.conf [general] anon-access = read auth-access = write realm = myrepo [sasl] use-sasl = true min-encryption = 128 max-encryption = 256 /etc/sasl2/svn.conf pwcheck_method: auxprop auxprop_plugin: sasldb sasldb_path: /etc/sasl2/my_sasldb mech_list: DIGEST-MD5 sasldb users $ sasldblistusers2 -f /etc/sasl2/my_sasldb test@myrepo: cmusaslsecretOTP test@myrepo: userPassword You'll notice that the output of sasldblistusers2 shows my test user as having both an encrypted cmusaslsecretOTP password as well as a plain text userPassword passwd. i.e., if I were to run strings /etc/sasl2/my_sasldb I would see the test users' password in plaintext. These two password entries were created with the following subversion book recommended command: saslpasswd2 -c -f /etc/sasl2/my_sasldb -u myrepo test After reading man saslpasswd2 I see the following option: -n Don't set the plaintext userPassword property for the user. Only mechanism-specific secrets will be set (e.g. OTP, SRP) This is exactly what I want to do, suppress the plain text password and only use the mechanism-specific secret (OTP in my case). So I clear out /etc/sasl2/my_sasldb and rerun saslpasswd2 as: saslpasswd2 -n -c -f /etc/sasl2/my_sasldb -u myrepo test I then follow it up with a sasldblistusers2 and I see: $ sasldblistusers2 -f /etc/sasl2/my_sasldb test@myrepo: cmusaslsecretOTP Perfect! I think, now I have only encrypted passwords.... only neither the Linux svn client nor the Windows TortoiseSVN client can connect to my repo anymore. They both present me with the user/pass challenge but that's as far as I get. TLDR So, what is the point of SVN supporting SASL if my sasldb must store its passwords in plaintext to work?

  Read the article

• Advice on migrating from a Samba PDC

  - by pgb

  When we started our software development company, we decided to use Samba as a PDC for the few Windows workstations we had. We use Samba with OpenLDAP, and it has been a good replacement for AD for almost 6 years now (using Windows XP workstations). Now I'm facing a few problems with our setup: The Linux server where the PDC runs is very outdated (and is a Gentoo install, don't ask why!) We started using Windows 7 on some of the workstations, and these can't join the Samba domain (there's a workaround, I know) Our company has grown a bit, and we have now about 20 workstations (and plan to have more in the near future). I have to reinstall our PDC, and was thinking on updating to another Linux distro and the latest Samba 3.4. However, I started having second thoughts, and now I think going to a Windows Server for the PDC is the way to go. The main drivers to opt for a Windows Server would be its easy administration and the ability to use Windows 7 out of the box, without any registry hacks. My question(s) then is(are): How should I do this migration? Can I keep the same domain name? What will happen to the users? Will they be recreated and won't be identified by the workstations as being the same user, even if the actual username is the same? What steps would you recommend me to migrate from Samba to Windows Server? Bonus question: If you think staying in Samba is the way to go with my current setup, I'm also interested on your thoughts.

  Read the article

• Fix stubborn 'Setting locale failed.'

  - by plua

  I have a very stubborn, well-known locale error on Ubuntu 9.10: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TIME = "custom.UTF-8", LANG = "en_US.UTF-8" Tried the following: Added LANG=en_US.UTF-8 and LC_ALL=en_US.UTF-8 to /etc/environment Run apt-get install --reinstall locales (error: perl: warning: Falling back to the standard locale ("C"). /usr/bin/mandb: can't set the locale; make sure $LC_* and $LANG are correct) Run sudo dpkg-reconfigure locales. Result: Cannot set LC_ALL to default locale: No such file or directory, and then updates locales all locales including en_US.UTF-8 sudo locale-gen updates all locales successfully, including en_US.UTF-8 sudo locale-gen un_US en_US.UTF-8 gives no error nor other output In /etc/default/locale it says LANG="en_US.UTF-8" echo $LANG gives en_US.UTF-8 /var/lib/locales/supported.d/local says en_US.UTF-8 UTF-8 locale -a gives me: C en_AG en_AU.utf8 en_BW.utf8 en_CA.utf8 en_DK.utf8 en_GB.utf8 en_HK.utf8 en_IE.utf8 en_IN en_NG en_NZ.utf8 en_PH.utf8 en_SG.utf8 en_US.utf8 en_ZA.utf8 en_ZW.utf8 POSIX So well... I am pretty much out of options I can think of. Anybody any idea?? Thanks!

  Read the article

• Outlook meetings and auto accept/reply

  - by Morten

  First, I'm not sure if this question should be here or superuser, but here it comes. Im trying to set up a room to auto accept meetings and so far its good but i was wondering if it's possible to change it to "do not send respond" when it accepts and sends some reply when it's the same time as another existing meeting, so it declined. And a little extra question: is it possible to chance that auto reply it sends, since it's in English, and I would like to chance it to Danish and some text I choose myself?

  Read the article

• Accessing apache in ubuntu 10 virtualbox guest from ubuntu 10 host

  - by Francis L

  I did the following: installed VirtualBox 3.1.6 OSE in ubuntu 10 desktop. installed ubuntu 10 server on a virtual machine in VirtualBox. select "LAMP server" and "OpenSSH server" options during the ubuntu server installation. leave network "adapter 1" of virtual machine as "NAT". use "VBoxManage" described in manual to setup port forwarding on the host (Protocol: TCP, GuestPort: 80, HostPort: 8080). verify "ExtraDataItem" have been added to "ubuntuServer1.xml" (my virtual machine name) correctly. run command "pgrep apache" in ubuntu server in virtual machine to ensure apache is running. Everything went well. But, when I try to access the apache from the browser on the host with "http://localhost:8080/", it just continue fetching with no response. Now, I'm struck! Please help! Many many thanks in advance!

  Read the article

• IE Kerberos failure on some machines with CNAME web server (with SPN for host's A record)

  - by Eric Thames

  It's fairly well known that IE doesn't like to do Kerberos against hosts that are registered in DNS as CNAMEs. What happens is that IE turns around and uses the underlying A record for the host for looking up the Service Principal Name (SPN). On a test network we are able to get Kerberos working by having the SPN registered for the A record of the host, so that Kerberos authentication happens successfully when accessing the web server via it's CNAME in the browser. Kerberos authentication works properly when directly accessing the web server with the A record host in the URL, but for various reasons that are beyond my control, it is desired to use the CNAME. On the production network, this same configuration fails though and I can't figure out why. Any thoughts? This is a java web application using the SPNEGO library - not IIS. Kerberos authentication is working properly in both the test and production networks (and has been confirmed to not fail back to NTLM), but the CNAME access only works in test.

  Read the article

• Can VMWare Server 2.0 be useful in Production for easing backups?

  - by Keith Sirmons

  Howdy, Let's run this idea by the group here. I am thinking about using VMWare Server in production to host a 2008 Domain Controller with DHCP and DNS, a 2008 member server with WSUS, some virus software, and other "management" utilities a second 2008 member server with SQL, IIS, and File Shares for a medium business of 50-100 desktops. The reason I am leaning toward Server vs ESXi is for backup purposes. Using ESXi, if I want to backup the VM's, I would need a second server in the office with enough storage availability to hold a copy of the vmdks. I am wondering if putting this virtual environment on top of a basic 2008 server install will allow for easier backups to both tape and/or to offsite storage using JungleDisk. Can a snapshot be triggered easily via a scheduled job? I know this doesn't necessarily handle file level restores, but I want to make sure in a DR situation, we can restore production servers quickly. Does this concept hold water? Would a very minimum install of the 2008 Host remove too many resources from the actual production machines? This would be a new Dell 410 server with 12 GB ram and (6) 600 GB 15K in a RAID 6, Dual Intel Xeon 2.26GHz procs.

  Read the article

• Decoding PAM configuration files ...

  - by Jamie

  Could someone point me to some (recent) documentation that would help me with decoding PAM configuration file lines like this: auth [success=2 default=ignore] pam_unix.so nullok_secure auth [success=1 default=ignore] pam_winbind.so krb5_auth krb5_ccache_type=FILE cached_login try_first_pass I'm trying to get my Ubuntu box (testing 10.04 Server Beta 2) to use Active Directory, and the last step is to get PAM on the unix box to work, but I'm wary about making changes (and locking myself out) without understanding how to merge what I'm reading here with what ubuntu has implemented.

  Read the article

• How to Creat custom content for nginx error 502 page, keep origin url on browser

  - by user123862

  i'm trying to get custom language and message for nginx error page but keep url on browser.. not success for eg: i go to url : xaluan.com/aaa/bbb.html on the time server down.. nginx will show error 502. with the same url but custom message as my language. test 1. I created a custom page at /usr/local/nginx/html/205.html as following config but it show on web site when error is default nginx error at domain.com/50.html ( the content of webpage not same as i created) error_page 502 /502.html; location = /502.html { root /usr/local/nginx/html; } test 2. Then i create same page at my www domain folder /home/xaluano/public_html/502.html but this keep redirect me to root domain.com/502.html the content now same as i created. but.. the url still not as i need error_page 502 /502.html; location = /502.html { root /home/xaluano/public_html; internal; } EDIT UPDATE for more detail 10/06/2012 please download my nginx config http://pastebin.com/7iLD6WQq and vhost config following: http://pastebin.com/ZZ91KiY6 == the case test.. if apache httpd service stop: #service httpd stop then open browser go to: xaluan.com/modules.php?name=News&file=article&sid=123456 I will see the 502 error with the same url on browser address == Custome error page I need the config which help when apache fail .. will show the custom message tell user wail for 1 minute for service back then refress current page with same url ( refresh I can do easy by javascript ), Nginx dosent change url so java-script can work out. any help will be great.. thank in advance

  Read the article

• Searching for literal "> \" using ack-grep

  - by Stephen Gornick

  I am looking for lines that literally have a greater than character (a "") followed by a space followed by a backslash character (a "\") i.e., a line with this: \ I thought escaping would allow this, and for the greater-than it does: $ ack-grep " " returns lines that have " " in them. But when I try to escape the backslash as well I get: $ ack-grep " \" ack-grep: Invalid regex ' \': Trailing \ in regex m/ \/

  Read the article

• Need to make a scheduled task run as another user but keep the current user’s environment

  - by Chad Marmon

  I need to backup users .pst files. The current method I am trying is making a shadow copy using Diskshadow. My script works great all but Diskshadow needs to be ran as administrator but also needs to retain the logged-on user's environment variables; specifically, the %USERNAME% and %HOMESHARE% variables so the right user’s files get copied up to the right network location. I have for the most part got this to work), but there’s no straightforward (or secure, at least) way to pass the password. If I set up a scheduled task to run the script as a domain user with local admin privs, the environment variables get lost. I need to run this script automagically so that there should be no user interaction. If I could figure out how to make a scheduled task run as another user but keep the current user’s environment, I think this would work, but I’ve been beating my head against that for a while now, without any luck.

  Read the article

• Hiera can't find puppet environment

  - by quickshiftin

  I'm testing out hiera and hitting a snag on the hierarchy configuration. What I have is extremely simple, the part that isn't working is specification of hiera datadir files based on environment. Here's the config file (/etc/hiera.yaml) I'm trying --- :backends: - yaml :logger: console :hierarchy: - "%{::environment}" :yaml: :datadir: /var/lib/hiera Now, I have a file /var/lib/hiera/development.yaml blah: meh When I run hiera it's not finding the file or the value $ hiera -d blah DEBUG: Fri Oct 25 15:50:52 -0600 2013: Hiera YAML backend starting DEBUG: Fri Oct 25 15:50:52 -0600 2013: Looking up blah in YAML backend nil I've verified this agent is configured for development $ sudo puppet agent --configprint environment development Now let me prove hiera is capable of finding something; a change to the hiera.yaml file: :hierarchy: - development And now hiera finds the file and the value $ hiera -d blah DEBUG: Fri Oct 25 15:53:25 -0600 2013: Hiera YAML backend starting DEBUG: Fri Oct 25 15:53:25 -0600 2013: Looking up blah in YAML backend DEBUG: Fri Oct 25 15:53:25 -0600 2013: Looking for data source development DEBUG: Fri Oct 25 15:53:25 -0600 2013: Found blah in development meh So why isn't it working with the dynamic environment configuration? I got that straight from the documentation. Note, I have tried running the hiera command via sudo with no change in the result.

  Read the article

• SSL on local sub-domain and sub-sub-domain

  - by Eduard Luca

  I have both local.domain.com and lmarket.local.domain.com pointing to my localhost from etc/hosts. The problem is that I am using XAMPP on Windows 7, and have 2 SSL VirtualHosts in my apache config, but no matter which one I access, I am taken to local.domain.com. On non-HTTPS requests all works fine, and the vhosts are basically the same. Here is the relevant part of my vhosts: <VirtualHost local.domain.com:443> DocumentRoot "C:/xampp/htdocs/local" ServerName local.domain.com ServerAdmin webmaster@localhost ErrorLog "logs/error.log" <IfModule log_config_module> CustomLog "logs/access.log" combined </IfModule> SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile "conf/ssl.crt/server.crt" SSLCertificateKeyFile "conf/ssl.key/server.key" <FilesMatch "\.(cgi|shtml|pl|asp|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory "C:/xampp/cgi-bin"> SSLOptions +StdEnvVars </Directory> BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0 CustomLog "logs/ssl_request.log" "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" </VirtualHost> <VirtualHost lmarket.local.domain.com:443> DocumentRoot "C:/xampp/htdocs/lmarket.local" ServerName lmarket.local.domain.com ServerAdmin webmaster@localhost ErrorLog "logs/error.log" <IfModule log_config_module> CustomLog "logs/access.log" combined </IfModule> SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile "conf/ssl.crt/server.crt" SSLCertificateKeyFile "conf/ssl.key/server.key" <FilesMatch "\.(cgi|shtml|pl|asp|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory "C:/xampp/cgi-bin"> SSLOptions +StdEnvVars </Directory> BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0 CustomLog "logs/ssl_request.log" "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" </VirtualHost> If I invert these blocks, then the opposite happens: local.domain.com goes to lmarket.local.domain.com. Any help would be appreciated.

  Read the article

• How to add an SSH user to my Ubuntu 12 server to upload PHP files

  - by user229209

  I have an Ubuntu 12 VPS and wanted to create a user account to upload and download my PHP code. So when logged in as root I created a user "chris" and then created a directory /var/www/chris I want "chris" to be able to upload and run files to the /var/www/chris directory. Permissions for the chris dir look like this: drwxrwxr-x 2 root chris 4096 Aug 20 03:35 chris As root I created a sample file called abc.php and put it in the chris dir. It worked fine when I test it in a browser. I logged in as chris and uploaded a file called 1234.php. That did not work. I just got a blank PHP page. The code was identical in both files. So it is not the code. The permissions now look like this: -rw-r--r-- 1 root chris 59 Aug 20 03:34 1234.php -rw-r--r-- 1 root root 49 Aug 20 03:21 abc.php How do I alow the "chris" user to upload files and get them to work?

  Read the article

• Is it necessary to burn-in RAM for server-class systems?

  - by ewwhite

  When using server-class systems with ECC RAM, is it necessary or even useful to burn-in the memory DIMMs prior to deployment? I've encountered an environment where all server RAM is placed through a lengthy multi-day burn-in/stress-tesing process. This has delayed system deployments on occasion and adds an extra step to the hardware lead-time. The server hardware is primarily Supermicro, so the RAM is sourced from a variety of vendors; not directly from the manufacturer like a Dell Poweredge or HP ProLiant. Is this process useful? In my past experience, I simply used vendor RAM out of the box. Isn't that what the POST memory tests are for? I've encountered and responded to ECC errors long before a DIMM actually failed. The ECC thresholds were usually the trigger for warranty placement. Do you burn your RAM in? If so, what method do you use to perform the tests? Has the burn-in process resulted in any additional platform stability? Has it identified any pre-deployment problems?

  Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >