Search Results

Search found 23480 results on 940 pages for '32 bit'.

Page 199/940 | < Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206 | Next Page >

Can I upgrade an Asus M51Sn laptop to 2x4GB of RAM? (DDR2)

- by matteo

My Asus M51Sn has 2 RAM slots which currently have 1x1GB + 1x2GB DDR2-800 SODimm RAM modules installed. I've found out that 4GB DDR2 SODimm modules do exist, though they are impossible to find in local stores nere here, but I've found them in online stores like these: http://www.pccomponentes.com/g_skill_ddr2_800_pc2_6400_4gb_so_dimm.html They seem to meet the specification, so can I replace both my current modules with 2x4GB modules, and reach a total of 8GB? Or should I worry about some limit (e.g. 4GB max or 2GB per slot) imposed by the matherboard, chipset or whatever? (I currently use Ubuntu 12.04 32 bit, so I plan to use the pae kernel, which supposedly supports 4GB ram on a 32bit system; or I may consider switching tu 64bit ubuntu; the question is about hardware limitations, not OS limitations).

Read the article
Error "fileid changed" when accessing files over NFS

- by Roman Prikhodchenko

I have an nfs-kernel-server configured and running on Ubuntu 10.04 Server. /export THIRD_SERVER_IP(rw,fsid=0,insecure,no_subtree_check,async) SECOND_SERVER_IP(rw,fsid=0,insecure,no_subtree_check,async) /export/ebs THIRD_SERVER_IP(rw,fsid=0,insecure,no_subtree_check,async) SECOND_SERVER_IP(rw,nohide,insecure,no_subtree_check,async) I mounted the exported folder to the second server: mount -t nfs4 -o proto=tcp,port=2049 NFS_SERVER_IP_HERE:/ebs /ebs and it works just fine. I mounted it to the third server but I cannot access files from it. ls -l /ebs ls: reading directory /ebs: Stale NFS file handle total 0 The syslog on the third server says: kernel: [11575.483720] NFS: server NFS_SERVER_IP_HERE error: fileid changed kernel: [11575.483722] fsid 0:14: expected fileid 0x2, got 0x6e001 Some info: uname -r 2.6.32-312-ec2 uname -m i686

Read the article
Laptop hot after format

- by Dany Khalife

I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

Read the article
Laptop hot after format

- by Dany Khalife

I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

Read the article
SQL Server Instancing: Should I use multiple instances or databases?

- by Spence

I have a reasonable server connected to a SAN which will be running SQL servers for multiples of the same application. There are no security issues with one application being able to read anothers database. We are unfortunately in 32 bit windows as well. I'm of the opinion that it would be better to use one instance on the server, enable AWE so that the server instance can use almost all of the ram we have and then run each of the databases in the one instance. However I've been overruled by the gods of the IT department on this one, so I'm really curious to hear your thoughts on this. From a performance point of view, am I incorrect that one instance of SQL is better than two? I know that we could do some failover stuff, but doing that on one blade only seems like overkill to me..

Read the article
Intgrating windows 2000 server in a windows 2008 domain [on hold]

- by user199121

I have a network enviroment where my windows 2000 server is just acting as fileserver for sharing, so all the users has an account there with username, password and a list of access rights. Now i want to keep this server cause i am running from there an application that 20 users access but also i want to add a new Windows 2008 R2 64 bit server as a domain controller. Is this possible ? 1-It is ok to make the new windows 2008 server a domain controller ? 2- I want all the users accounts to be the same in the domain controller so they can still use the same username and password to login into the domain as well into the windows 2000 server that is setup as a Workgroup. 3- Do i need to do something to the windows 2000 sever to still be functional in the environment so it can be accessed by the clients computers? note:My clients computers are windows 2000 pro, xp pro and windows 7 32/64 bit. Thanks in advance

Read the article
Mouse clicks stop working sometimes

- by AlbertoPL

I am having a serious issue with my mouse in which it will randomly not be able to click or cause other problems. Here is the breakdown: Sometimes, I can no longer left-click on many of my windows/taskbar (in order to focus them). Even though I can still left click on my desktop icons or the currently active window, I cannot focus any of the others. Other times, when I have a browser open, I will hit to go back one page and it will automatically go forward one page. I know it's a mouse issue because this behavior stops when I unplug the mouse. Things will be fine when I plug the mouse back in, but eventually the behavior starts up again. My mouse is a Razer Diamondback 3G and I am running Windows 7 Professional 32 bit. Any ideas?

Read the article
vsftpd chroot_local_user does nothing

- by Reinderien

I'm setting up a vsftpd server on: Linux 2.6.32-26-server #48-Ubuntu SMP Wed Nov 24 10:28:32 UTC 2010 x86_64 GNU/Linux When I set chroot_local_user=YES, there is no effect (I can still see / when I log in). There is nothing in syslog or /var/log/vsftpd.log to indicate what's wrong. I know that I'm editing the right conf file and that other settings do come into effect when I restart the daemon, because these work: ssl_enable=YES force_local_data_ssl=YES force_local_logins_ssl=YES Any idea what's wrong? Thanks. Edit: I've touched /etc/vsftpd.chroot_list for it to be empty (no chroot-denied users), and have added: chroot_list_enable=YES chroot_list_file=/etc/vsftpd.chroot_list Then to restart: sudo /etc/init.d/vsftpd restart Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service vsftpd restart Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the restart(8) utility, e.g. restart vsftpd vsftpd start/running, process 5606 Still no effect.

Read the article
Proxmox 31 + KVM routing + IP subnet + csf

- by KeyJey

We have proxmox 3.1 server in netzner with routuing network and IP subnet block. We want to implement csf firewall without interfering the traffic of the KVM VMs, what would be the easiest way? We readed that we should add this lines to /etc/csf/csfpost.sh: iptables -A FORWARD -d 144.76.223.155 -j ACCEPT iptables -A FORWARD -d 144.76.223.156 -j ACCEPT iptables -A FORWARD -d 144.76.223.157 -j ACCEPT iptables -A FORWARD -d 144.76.223.158 -j ACCEPT iptables -A FORWARD -d 144.76.223.159 -j ACCEPT iptables -A FORWARD -d 144.99.183.323 -j ACCEPT But when we enable csf the ping breaks, this is the network config (IPs are modified): auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address 144.76.166.100 netmask 255.255.255.255 pointopoint 144.76.183.97 gateway 144.76.183.97 # for single IPs auto vmbr0 iface vmbr0 inet static address 144.76.166.100 netmask 255.255.255.255 bridge_ports none bridge_stp off bridge_fd 0 up ip route add 144.99.183.323/32 dev vmbr0 # for a subnet auto vmbr1 iface vmbr1 inet static address 144.76.166.100 netmask 255.255.255.248 bridge_ports none bridge_stp off bridge_fd 0 Thanks in advanced ! :)

Read the article
Gateway MX6440 CPU Upgrade

- by BPugh

I have received an a Gateway MX6440 laptop as a freebie, but I'm interested in upgrading its AMD Turion 64 ML-32 (socket 754) to something faster (and more cache). I know the range of processors that could work based on the family list in Wikipedia. However, this computer has the stock bios, and any updates I haven't applied from Gateway doesn't specify processor support. I'm looking to go to at least a 2.2 (ML-40). Has anybody upgraded the processor in this model or other in the series success or failure and do you happen to have any guides handy for working with the heat sink? Any Googling I have done keeps hitting RAM marketers. Update Computer died before I had a chance to try this out.

Read the article
How do I do a cross-platform backup/restore of a DB2 database?

- by Pridkett

I need to dump a couple of databases from DB2 for Mac and DB2 for Linux and then import the databases to DB2 for Windows. Unfortunately, when I try the standard backup and restore I get the following error: SQL2570N An attempt to restore on target OS "NT-32" from a backup created on source OS "?" failed due to the incompatability of operating systems or an incorrect specification of the restore command. Reason-code: "1". I've seen references to DB2 needing an IXF dump and import, but I can't find any solid information about how to do this without dozens of other steps. Any hints on how to do this in the least painful manner?

Read the article
STS 2.5.2 showing error error occurred during initialization of vm could not reserve enough space for object heap eclipse

- by user1460079

I am using STS2.5.5 with jdk 1.6 in my system with 32 BIT winx Xp it was working fine for few HRs when i installed it for the first time, after that when i restart STS it started showing exception Failed Initialize when i start the TC it throws hte exception error occurred during initialization of vm could not reserve enough space for object heap eclipse It is working fine in another system with same config, to resolve this if i delete STS and reinstall STS it works fine but again throws same error if i close STS and open it can anybody help me, i am also not able to change the size in my sts.ini if i increase memory and start STS then it will not start.

Read the article
alternatives to altaris/symentec SVS

- by The Journeyman geek

I use an old copy of altaris SVS (link to lifehacker - symentec gutted the old altaris website) for testing applications - it lets me capture the changes one executable makes, or changes to a whole system into a bundle, and remove the whole bundle once i'm done. However symentec bought over altaris and apparently killed off the product, or merged it into some other bigger product. I'd like the same fine grained control SVS had, something that just does this, and preferably free (for personal use) or not too expensive. I'd like this to run on at least windows XP 32 bit, but windows 7 and 64 bit support would be nice too

Read the article
Explorer.exe keeps crashing if effects are enabled

- by Allende

The explorer.exe keeps crashing before every minute after starts when all the effects are activated. These are the details of the error: Problem signature: Problem Event Name: InPageError Error Status Code: c0000185 Faulting Media Type: 00000003 OS Version: 6.1.7600.2.0.0.256.48 Locale ID: 1033 Additional Information 1: a7aa Additional Information 2: a7aa91f17ea749d42a4de3b390fa5b3d Additional Information 3: a7aa Additional Information 4: a7aa91f17ea749d42a4de3b390fa5b3d Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt I suspect there's a problem with my hard drive ('cause I already have to format/install twice before this error) but not pretty sure why if I disable all the effect (Performance options) help to stop the issue. Anyway if someone have any idea, thanks. I already replace shell32.dll and explorer.exe using the windows 7 dvd Laptop Model: ProBook 4520s Windows Version: Profesional 32 bits. My regards

Read the article
Help creating image from LVM

- by jackhab

I need to duplicate CentOS hard drive image for multiple stations. The HD has the following layout: Disk /dev/sdb: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 250GB 250GB primary lvm I saved /dev/sdb1 to file with fsarchiver but for sdb2 I get: /fsarchiver savefs an2.fsa /dev/sdb2 oper_save.c#1006,filesystem_mount_partition(): can't detect and mount filesystem of partition [/dev/sdb2], cannot continue. removed an2.fsa Although fsarchiver probe simple correctly detects sdb2 as LVM2_member. Is fsarchiver correct tool for this job? What's wrong? I'm on Ubuntu 9.1 with fsarchiver 0.6.8 and lvm tools installed. Thanks.

Read the article
Help creating image from LVM

- by jackhab

I need to duplicate CentOS hard drive image for multiple stations. The HD has the following layout: Disk /dev/sdb: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 250GB 250GB primary lvm I saved /dev/sdb1 to file with fsarchiver but for sdb2 I get: /fsarchiver savefs an2.fsa /dev/sdb2 oper_save.c#1006,filesystem_mount_partition(): can't detect and mount filesystem of partition [/dev/sdb2], cannot continue. removed an2.fsa Although fsarchiver probe simple correctly detects sdb2 as LVM2_member. Is fsarchiver correct tool for this job? What's wrong? I'm on Ubuntu 9.1 with fsarchiver 0.6.8 and lvm tools installed. Thanks.

Read the article
"Windows was unable to complete the format" - Can't format flashdrive!!!

- by Jake

I have a 8GB Sandisk Cruzer USB flash drive that I had ruined a while back trying to make it bootable. Anyway now when I click on it I get a message that it needs to be reformatted to be used. So when I try to do that, the formatting starts and suddenly ends with the message "Windows was unable to complete the format". This happens no matter which file system I choose (NTFS, FAT32, exFat) and also which computer I try this on. I am now on a Windows 7 32 bit OS and before tries it on a Vista Home Basic machine. Anyone know any way around this issue? Many thanks.

Read the article
How to block own rpcap traffic where tshark is running?

- by Pankaj Goyal

Platform :- Fedora 13 32-bit machine RemoteMachine$ ./rpcapd -n ClientMachine$ tshark -w "filename" -i "any interface name" As soon as capture starts without any capture filter, thousands of packets get captured. Rpcapd binds to 2002 port by default and while establishing the connection it sends a randomly chosen port number to the client for further communication. Both client and server machines exchange tcp packets through randomly chosen ports. So, I cannot even specify the capture filter to block this rpcap related tcp traffic. Wireshark & tshark for Windows have an option "Do not capture own Rpcap Traffic" in Remote Settings in Edit Interface Dialog box. But there is no such option in tshark for linux. It will be also better if anyone can tell me how wireshark blocks rpcap traffic....

Read the article
FreeBSD high load loopback interface

- by user1740915

I have a problem with a FreeBSD server. There is a FreeBSD 9.0 amd64, two network cards em1 (internet), em0 (local network) configured firewall ipfw, natd, squid (not transparent), the server acts as a gateway for access to the Internet. Next problem: upload via squid is very low. At this moment I see next: natd, dhcpd load the cpu at that time when uploading through squid and there are a lot of traffic through the loopback interface. ipfw show output 0100 655389684 36707144666 allow ip from any to any via lo0 00200 0 0 deny ip from any to 127.0.0.0/8 00300 0 0 deny ip from 127.0.0.0/8 to any 00400 0 0 deny ip from any to ::1 00500 0 0 deny ip from ::1 to any 00600 4 292 allow ipv6-icmp from :: to ff02::/16 00700 0 0 allow ipv6-icmp from fe80::/10 to fe80::/10 00800 1 76 allow ipv6-icmp from fe80::/10 to ff02::/16 00900 0 0 allow ipv6-icmp from any to any ip6 icmp6types 1 01000 0 0 allow ipv6-icmp from any to any ip6 icmp6types 2,135,136 01100 1615 76160 deny ip from 192.168.1.1 to any in via em1 01200 0 0 deny ip from 199.69.99.11 to any in via em0 01300 46652 3705426 deny ip from any to 172.16.0.0/12 via em1 01400 3936404 345618870 deny ip from any to 192.168.0.0/16 via em1 01500 4 336 deny ip from any to 0.0.0.0/8 via em1 01600 4129 387621 deny ip from any to 169.254.0.0/16 via em1 01700 0 0 deny ip from any to 192.0.2.0/24 via em1 01800 917566 33777571 deny ip from any to 224.0.0.0/4 via em1 01900 147872 22029252 deny ip from any to 240.0.0.0/4 via em1 02000 1132194739 1190981955947 divert 8668 ip4 from any to any via em1 02100 3 248 deny ip from 172.16.0.0/12 to any via em1 02200 35925 2281289 deny ip from 192.168.0.0/16 to any via em1 02300 1808 122494 deny ip from 0.0.0.0/8 to any via em1 02400 3 174 deny ip from 169.254.0.0/16 to any via em1 02500 0 0 deny ip from 192.0.2.0/24 to any via em1 02600 0 0 deny ip from 224.0.0.0/4 to any via em1 02700 0 0 deny ip from 240.0.0.0/4 to any via em1 02800 960156249 1095316736582 allow tcp from any to any established 02900 64236062 8243196577 allow ip from any to any frag 03000 34 1756 allow tcp from any to me dst-port 25 setup 03100 193 11580 allow tcp from any to me dst-port 53 setup 03200 63 4222 allow udp from any to me dst-port 53 03300 64 8350 allow udp from me 53 to any 03400 417 24140 allow tcp from any to me dst-port 80 setup 03500 211 10472 allow ip from any to me dst-port 3389 setup 05300 77 4488 allow ip from any to me dst-port 1723 setup 05400 3 156 allow ip from any to me dst-port 8443 setup 05500 9882 590596 allow tcp from any to me dst-port 22 setup 05600 1 60 allow ip from any to me dst-port 2000 setup 05700 0 0 allow ip from any to me dst-port 2201 setup 07400 4241779 216690096 deny log logamount 1000 ip4 from any to any in via em1 setup proto tcp 07500 21135656 1048824936 allow tcp from any to any setup 07600 474447 35298081 allow udp from me to any dst-port 53 keep-state 07700 532 40612 allow udp from me to any dst-port 123 keep-state 65535 1990638432 1122305322718 allow ip from any to any systat -ifstat when uploading via squid Load Average ||| Interface Traffic Peak Total tun0 in 79.507 KB/s 232.479 KB/s 42.314 GB out 2.022 MB/s 2.424 MB/s 59.662 GB lo0 in 4.450 MB/s 4.450 MB/s 43.723 GB out 4.450 MB/s 4.450 MB/s 43.723 GB em1 in 2.629 MB/s 2.982 MB/s 464.533 GB out 2.493 MB/s 2.875 MB/s 484.673 GB em0 in 240.458 KB/s 296.941 KB/s 442.368 GB out 512.508 KB/s 850.857 KB/s 416.122 GB top output PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 66885 root 1 92 0 26672K 2784K CPU3 3 528:43 65.48% natd 9160 dhcpd 1 45 0 31032K 9280K CPU1 1 7:40 32.96% dhcpd 66455 root 1 20 0 18344K 2856K select 1 119:27 1.37% openvpn 16043 squid 1 20 0 44404K 17884K kqread 2 0:22 0.29% squid squid.conf cat /usr/local/etc/squid/squid.conf # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 10.0.0.0/8 # RFC1918 possible internal network acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 192.168.1.1:3128 # Uncomment and adjust the following to add a disk cache directory. #cache_dir ufs /var/squid/cache 100 16 256 # Leave coredumps in the first cache dir coredump_dir /var/squid/cache I understand that the traffic passes through the SQUID several times. But can not find why.

Read the article
SNMP counter issues with cisco RV082

- by Chance

Does anyone else poll this router with SNMP? We are using firmware version: 2.0.0.19-tz We are having problems with the traffic counters, some of them appear to be implemented as 16 bit counter instead of 32 bit counters. The reason this is causing problems is that they roll over (at 65,000) to 0 in less than our minute polling cycle, really skewing our metrics. The counter for the Lan (interface 2) seems to be functioning properly, however interfaces 3 and 4 (WAN and DMZ / WAN2) rollover at 65000. Tue May 11 08:38:31 EDT 2010 IF-MIB::ifInOctets.1 = Counter32: 137634 IF-MIB::ifInOctets.2 = Counter32: 1865677943 IF-MIB::ifInOctets.3 = Counter32: 12450 IF-MIB::ifInOctets.4 = Counter32: 49354 Look at counter IF-MIB::ifInOctets.4 5 seconds later: Tue May 11 08:38:36 EDT 2010 IF-MIB::ifInOctets.1 = Counter32: 137634 IF-MIB::ifInOctets.2 = Counter32: 1865836207 IF-MIB::ifInOctets.3 = Counter32: 13167 IF-MIB::ifInOctets.4 = Counter32: 12900 Any suggestions? Seems like a bug to me, however I just wanted to make sure I wasn't crazy.. Thanks!

Read the article
Windows Disk I/O Analysis

- by Jonathon

It appears that we are having a problem with the disk i/o speed on our Windows 2003 Enterprise Edition server (64-bit). As we were initializing a database that created two 1G tablespaces on 3 different machines, it became obvious that the two smaller machines (each 32-bit Windows 2003 Standard Edition with less RAM) killed the larger machine when creating the files. The larger machine took 10x as long to create the tablespaces than did the other machines. Now, I am left wondering how that could be. What programs or scripts would you guys recommend for tracking down the I/O problem? I think the issue may be with the controller card (all boxes are hardware RAID 10, but have different controller cards), but I would like to check the actual disk I/O speed as well, so I have some hard numbers to work with. Any help would be appreciated.

Read the article
How do I keep second monitor (HDTV) from auto-disabling in XP when it is turned off?

- by ThantiK

I have a new 32" TV that I hooked up to the HDMI port on the back of my video card to use as a second monitor. I used an HDMI/DVI cable to hook it to the TV, and whenever I turn my TV off, XP disables the device tied to the TV so each time I want to use the TV as the monitor, I have to go into my display properties and enable it; it gets pretty annoying. How do I turn this 'feature' off? -- I have an NVidia card should it be specific to the nvidia control panel.

Read the article
Why are all Linux commands broken after installing Perl?

- by user115079

I installed perl using following command: curl -L http://xrl.us/installperlnix | bash after that i run following command to create soft link ln -sf /usr/local/bin/perl /usr/bin/perl now I'm trying to run commands like dir, mkdir, ll, rm, vi but nothing seems to be working for me. also when i try to login into my shell i get following msg at startup: Last login: Wed Apr 4 21:50:12 2012 from x.y.z.ip -bash: perl: command not found please help. Here is system detail: cat /proc/version Linux version 2.6.18-274.18.1.el5.028stab098.1 (root@rhel5-build-x64) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Sat Feb 11 15:30:41 MSK 2012 cat /etc/issue CentOS 5.7 32 bit Kernel \r on an \m Don't know if perl was already installed or not. and now i can't check.

Read the article
Optimal Memory Configuration for Dell PowerEdge 1800 (Windows Server 2000 32bit)

- by David Murdoch

I am upgrading the memory on a Dell PowerEdge 1800 Server running Windows Server 2000 (32 bit). My Computer Properties currently reports "2,096,432 KB RAM" (4 modules @ 512MB each). Crucial.com scan reports: "Each memory slot can hold DDR2 PC2-5300 with a maximum of 2GB per slot. Maximum Memory Capacity: 12288MB Currently Installed Memory: 2GB Available Memory Slots: 2 Total Memory Slots: 6 Dual Channel Support: No CPU Manufacturer: GenuineIntel CPU Family: Intel(R) Xeon(TM) CPU 2.80GHz Model 4, Stepping 1 CPU Speed: 2793 MHz Installed in pairs of modules." We will be completely replacing the old 512 MB modules. Will there be any performance difference between installing 4 modules @ 1GB vs. 2 modules @ 2GB?

Read the article
Preparing Automatic Repair appears out of nowhere & takes forever?

- by Jörg B.

I shutdown my work machine (Windows 8.1 Pro) without any errors appearing (and without installing any new software and especially no new drivers the last couple days) yesterday evening, turned it on this morning and it automatically started into 'Preparing Automatic Repair' mode. 1st of - is there any way to get more information WHY this is appearing out of the blue and.. 2ndly, how long is this usually supposed to take? This is a rather beefy machine (Intel 3770k / 4 core 3.9ghz, Intel SSDs only and 32 gb of ram) but this screen has been 'loading' for almost 1.5 hours now. Is there any sort of debug/verbose mode that would give me ANY indication what's going on?

Read the article

< Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206 | Next Page >