Search Results

Search found 8228 results on 330 pages for 'card reader'.

Page 200/330 | < Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >

• How to set up multiple GPUs (12.04)?

  - by Brother Erryn

  I have two GPUs: one Intel i915 integrated, and one NVIDIA 560 Ti. This is NOT a hybrid setup, nor a laptop. In Windows 7, each card is connected to a different monitor, with the NVIDIA doing any "heavy lifting". For the life of me I cannot get Ubuntu to recognize the i915, but when logging off or rebooting, the shutdown actually appears on the i915. lshw lists both. I'm running the "current" NVIDIA drivers (not the experimental), but Displays calls its monitor a "Laptop". Is this even possible under Ubuntu? The only things that even looked like potential solutions were for laptop hybrid setups and used Bumblebee, but that doesn't seem to apply here.

  Read the article

• HD 6770M low graphics mode after update (AGAIN)

  - by Pihkal

  I have Ubuntu 12.04 LTS (re)installed on this laptop: I've also installed the fglrx-drivers for my ATI card (using apt-get),it appeared to work fine,that is until i updated my distro. Once again i got the "low graphics mode" error when i booted into the new kernel,booting in the old kernel works fine however. When i look into the logs i see "no screen found". This is the second time i install Ubuntu and the second time i run into problems with my graphics. Reinstalling isn't a solution since the problem keeps comming back. My question now is: does anyone know a REAL solution for this issue ar at least knows what's causing it? Any help would be greatly appreciated.

  Read the article

• How to install nvidia optimus driver on ubuntu 12.10?

  - by Adam

  I have followed http://ubuntuportal.com/2012/01/bumblebee-3-0-tumblewed-nvidia-optimus-gpu-switching-for-linux-has-been-released-how-to-install-bumblebee-3-0-on-ubuntu.html this guide to install nvidia driver on my Dell Inspiron N5110 notebook (Intel HD Graphics 3000 + NVIDIA GeForce GT525M), but i always get some error while i want to start any program with the optirun command. Terminal says: adam@Adam-LT:~$ optirun firefox [ 1482.559417] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver [ 1482.559517] [ERROR]Aborting because fallback start is disabled. My laptop cooler always cools the laptop, which means that nvidia card is consuming power in the background. (Terminal sometimes says something daemon-server is not running.) Can you give me some solution for this?

  Read the article

• Samsung RV520 with 12.04 freezes while having WiFi and brightness control issues

  - by daveu1

  I have a new Samsung RV520 and have just installed Precise Pangolin 12.04 LTS. I am having serious problems now with the wifi constantly disconnecting. This then causes the brightness control to appear on the screen. The screen starts flickering and then freezes the whole machine. Indeed the brightness control doesn't work at all. I am using a Intel Centrino N wireless card. Please can anyone provide any guidance as to how to resolve these issue on this machine. Many thanks for your help.

  Read the article

• Ubuntu 12.04 on Vm Player showing Wired Network Instead of Wireless Network

  - by Fak365

  I am new to Ubuntu, recently I installed ubuntu 12.04 in Vm Player (Virtual Machine) on my Dell laptop having windows 7 ultimate 32 bit for just to check the security of my wireless network and want to crack the WiFi (WPA-PSK) password but in ubuntu it does not show the wireless network it shows the 2 arrow sign as i have not connect the ethernet cable to my laptop and connected through WiFi on my main OS (windows 7) but it shows the wired network and internet is working but it does not show wifi connection. On windows 7 WiFi is connected and showing the WiFi connection and working correctly.But my main motive is to crack the WiFi password as it can't detect WiFi network so what to do? Please Help.!!thanks My Laptop Specification : Laptop : Dell Latitude D620 OS : Windows 7 Ultimate 32 bit Processor : Core Duo 2 T7200 @ 2Ghz Ram : 2 GB WiFi card : Intel Pro/Wireless 3945 ABG Virtual Machine : Vm Player V 5.0.1 If Need to Install Drivers Please Give Me Full Information how to install and which driver I should install. Thanks In Advance.

  Read the article

• How to disable VGA

  - by Bitmap

  If i run lspci | grep VGA I get below output which tells me below VGA cards are present on my computer. 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 08:02.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) The ES1000 is an onboard card which came with my machine. Do anyone know how to disable this VGA on my machine. The reason for this request is because if I run xrandr I get the output as shown below: xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 50.0* 800x600 51.0 52.0 53.0 680x384 54.0 55.0 640x480 56.0 512x384 57.0 400x300 58.0 320x240 59.0 Which means I am not able to configure nVidia to accept smaller resolution. Thank you.

  Read the article

• Ask the Readers: How Do You Share Your Photos?

  - by Jason Fitzpatrick

  It’s easy to snap away and fill up a memory card, but not quite as easy to share your best pics with your friends and family. How do you get your pics from your camera to your friends’ monitors? This week we’re interested in hearing about your favorite photo sharing tools and techniques. What’s your workflow for getting your photos from your digital camera to the virtual desktops of friends around the globe? Sound off in the comments with your favorite resources, applications, and photo sharing tricks. Make sure to check in on Friday for the What You Said roundup to see how your fellow readers get the job done. 8 Deadly Commands You Should Never Run on Linux 14 Special Google Searches That Show Instant Answers How To Create a Customized Windows 7 Installation Disc With Integrated Updates

  Read the article

• Amnesia crashes

  - by Phil

  I am able to launch amnesia all the way through the menu. After I click start new game I am able to play a little bit. I hear the guy talk, then the game just closes. I installed the libtxc-dxtn-s2tc0 already as some of the similar problems I found online were fixed by doing so, but did not work for me. My graphics card is Intel GMA 4500MHD. Cpu: Intel Core Duo 2.1 Ghz. RAM: 3GB What else can I do to try and fix this? I'm pretty new to Ubuntu, I just installed it recently. What else (and how) should I post that may help you help me better?

  Read the article

• How to use NVIDIA GeForce M310 on Ubuntu 12.10 running as guest in Virtualbox?

  - by huub

  Last couple of weeks played around with Ubuntu 12.10. This is running as a guest on Virtualbox hosted at Windows 7. There have been some challenges with the Unity 3D stuff. Particular due to not supporting X11 release 1.13 till very recently. Since today we are able to download Virtualbox version 4.2.2 which has through guest additions also support for X11 release 1.13. SO far great work everybody. Since Unity now only runs in 3D mode it would be nice to access the graphics card directly from Virtualbox. lshw -c display shows: VGA compatible controller; product: VirtualBox Graphics Adapter. QUESTION: how to get the 3D and other graphics directly supported by the hardware ie Nvidia GeForce M310

  Read the article

• No sound ubuntu 12.04, Tried everything

  - by user74679

  I've tried to find a solution to this but haven't been able to yet. I'm using ubuntu 12.04 installing using wubi installer. I have no audio. I can see the sound icon on the bar on top and interact with it. It doesn't say mute, it seems normal. "Codec:" /proc/asound/card*/codec* proc/asound/card0/codec#0:Codec: IDT 92HD75B3X5 proc/asound/card0/codec#1:Codec: LSI ID 1040 proc/asound/card1/codec#0:Codec: ATI R6xx HDMI Alsa shows all bars full for IDT 92HD75B3X5, no bars for ATI HDMI. Please help. I've reinstalled all drivers as well.

  Read the article

• Blank Screen ... No Bios Loading Screen Either

  - by SwissStar

  I don't even know how long it's been but I had given up. until now. My screen does not come on AT ALL, not even and the Bios loading screen. I have to connect it to my TV in order to see. But there's one thing that has always started it back up, and that is by running a hard ware Diagnostics * Provided by DELL* . It is definitely has something to do with Ubuntu. I know that for sure, because I remember running an update and BAM . That was it for the screen. How could I restore my screen back to Life ? I have a Nvidia Graphics Card.

  Read the article

• Ubuntu 12.04 Server monitor goes into sleep mode (no display) after fresh install

  - by xamox

  For some reason I can boot and either use Ubuntu 12.04 server edition, or desktop version. I can live boot the disk, I can go through the installer, or even use the ubuntu alternate installer. But for some reason after the install completes and I reboot the monitor seems to go back into sleep mode and then never loads the command prompt. This is on an industrial adlink MXE-1300 PC. I've installed ubuntu server fine on other models of adlink machines but this one doesn't want to seem to play nice. To me it seems like if it was a video card issue than I could never even load the installer or run ubuntu in live mode. Any thoughts or troubleshooting tips would be greatly appreciated.

  Read the article

• How to debug wifi connection?

  - by mmb

  I am using Ubuntu's Network Manager to connect to a local wifi router. My problem is, that it often disconnects without any visible reason (router is on, internet connection seems to be working, wifi diodes are blinking). I mostly have to disable wifi from Network Manager, enable it again to get wifi connecting again. Plus I am often experiencing Network Manager trying to connect to my wifi, trying several times but then giving up. I even tried an external usb-wifi card, but with the very same results. My question is: How can I debug this? Which logs should I read to see what is really happening when all of these errors occur - so I can post them here and see how to proceed?

  Read the article

• No video signal after install

  - by tW4r

  Today I tried to install Ubuntu 12.10 to my machine, but all the time I encountered the same problem, I successfully boot from Ubuntu 12.04 DVD, and a purple background comes up with accessibility and keyboard icons at the bottom of the screen, then when you wait a while a monitor text comes up "No signal" (Keep in mind that this signal is only shown when there's cable in the monitor HDMI plug), and nothing happens, a little later disk drive stops flashing meaning that disk finished being read. Even if you reset the computer you still get no signal, you have to turn the power of and on again, and plug HDMI out and put it in again. My info: Graphics card: ATI/AMD Radeon HD 4850 Connection to monitor: HDMI Monitor: Samsung SyncMaster T220HD

  Read the article

• .xprofile isn't enough

  - by BrianXP7

  I've been trying to find a solution on how to change the screen resolution on the login screen and other users. .xprofile will only affect my account. I've been searching for a few months but I got nothing. Please help. It would be easier if the "Default Resolution" was still there in the monitors settings. Plus, I'm afraid of editing the xorg.conf. Last time was ugly... My specs: HP dc5000 Small Form Factor Ubuntu 11.10 Oneiric Ocelot i386 Intel Pentium 4 2.40 GHz Intel 82865g x86/MMX/SSE2 Integrated Graphics (Standard Experience, OpenGL 1.3 and Runs Unity 3D :P) SoundMax Integrated Audio Card Broadcomm Integrated Ethernet 994.1 MiB RAM 38.3 GB HDD Acer X203H (Maximum Resolution 1600x900)

  Read the article

• Which way to make money on Android? ads, purchase, trial version?

  - by otakun85

  Hi, I want to release an app, but what is in your experience the best way to make money on android? I've seen some solutions out there, but which one is the best? Solution A: App is free and has ads. + long term income + free for customer ~ money based on usage - ads makes apps ugly - needs a internet connection, which your app may not need Solution B: App is purchased + instant income ~ money only once ~ the customer have only 15 minutes to try out the app - you need a credit card on the google market - the customer have to give money :D Solution C: Trial version Solution D: free Lite version with ads & full to pay version without adds Any other ideas?

  Read the article

• When trying running Ubuntu 12.10 off a usb drive, I encounter an error while prevent me from doing anything else

  - by Nil

  The details are that I used Universal USB Installer version 1.9.1.8 from pendrivelinux.com to install ubuntu 12.10 onto a 4gb pendrive as per instruction on Ubuntu's website. However, after I boot with drive I am met with the following message: "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Pressing Ctrl Alt F1 doesn't allow me access and the options on the dialog box either send me through a loop returning me to the previous dialog or just leave me dead in the water. Pressing Ctrl Alt Del does however restart the computer if I am dead in the water, so ubuntu isn't COMPLETELY unresponsive... I feel I should mention that I'm trying to run this distribution on my netbook. I can't install it directly to the harddrive since I need my current Windows distribution for certain programs that don't quite agree with WINE yet.

  Read the article

• BCM4313 partially working on Toshiba Satellite R630 (Ubuntu 12.10)

  - by Denis

  New to Ubuntu. During installation, the computer identified the wifi card and asked me to connect to the network. I did. After the first restart the wifi was working and I could see networks and connect to them. After the second restart the wireless has VANISHED. Still, the Broadcom STA drivers are enabled in system settings/additional drivers. Tried to restart 5 more times- no effect. I have studied very many topics on askubuntu but none of them work.

  Read the article

• Videos stutter in full screen

  - by user85256

  Using Ubuntu 12.04 with Gnome 3.4.2. When I load video files (avi, mkv, mp4), they play smoothly in windowed mode, but when in full screen, they mildly (but noticeably) stutter. I've tried various players (from VLC to SMplayer2), with many different output drivers and it's always the same. Also, my video card is AMD Radeon HD 6450, and I've had no luck with the proprietary FGLRX drivers. Every time I install them, my system becomes very sluggish (window dragging animations become choppy etc.). Thanks in advance, guys.

  Read the article

• Problem installing Lubuntu 11.04

  - by anyhelpisapreciated

  After I boot the Live-CD I can't select try Lubuntu or Install Lubuntu and I end up hanging on that screen. My PC specs are: Compaq Presario s4214bd 2.4ghz Intel Celeron. Windows XP/Ubuntu 10.04 dual boot. 768mb Ram. Nvidia 6200 Graphics card (I've switched between the onboard and PCI(this one) still no luck). I really want to use Lubuntu and I've been trying everything for the past 2-3 hours. Anything will help.

  Read the article

• Desktop in Kubuntu lacks bars and quite everything after trying to apply Plymouth fix for proprietary drivers

  - by Michcioperz

  I'm running Kubuntu 13.10, my computer's graphics card is Nvidia GT 520. I tried to fix that Plymouth's problem with proprietary graphics driver using an old script I found on the internet (it was coded for Natty, now that I think about it I shouldn't have done it). I ran that script and rebooted my computer. First incorrect behaviour I noticed was that Plymouth only displayed its text splash only on 1/4th of the screen, though when I pressed Esc key the logs were displaying correctly. Main problem appeared when I logged in. All my desktop's windows lack menu bar, can't be closed with Alt-F4, and they don't appear on the task bar. I tried fixing it by reinstalling GRUB a few times, purging /etc/grub.d and /boot/grub, but only the text splash issue was fixed. How can I fix that?

  Read the article

• Momentary freezes about every 60 seconds

  - by Barafu Albino

  I have just switched from OpenSuse to Ubuntu (the only reason is poor repositories - I got tired of installing everything from tar-balls). OpenSuse KDE worked flawlessly. Off-topic OS 7 does too. However, Ubuntu 13.04 after all updates keeps freezing about every minute. The time differs between occasions. It halts just for a fraction of a second, too quick to notice, but music crackles, and compressed video looses its tracks and covers with errors until a scenecut. I don't know what is responsible, the logs are clear. Tried to: change audio card, switched to Nvidia drivers and back, paused all unneeded daemons. Didn't help much. Any ideas where to look? I am experienced in Linux, just new in Ubuntu.

  Read the article

• How do I fix the audio on my laptop. model Fujitsu B6220

  - by user89756

  I reinstalled Ubuntu 12.04 on my laptop because the Unity desktop was freezing. Reinstalling 12.04 seems to have fixed the freezing problem, but now the audio does not work. When I go to SettingsAudio and under the Output tab it only has the option for Digital Output. There is no option for Analog Output. The sound card show up under lspci as: "00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)" What would be the command to reinstall the audio subsystem? If that would fix it...

  Read the article

• lower graphics setting in ubuntu

  - by zkent

  First off, I am new to Ubuntu. I come from a Windows background (DOS before that) and am loving it so far. I installed it on an older Dell laptop that I wanted to get another year out of. I set this machine up primarily as a LAMP development machine for a project I am working on. The machine is a Vostro 1500 and it has 4GB RAM (maxed) and an upgraded hard drive. I can't watch YouTube videos for long before it starts to overheat and start acting sporadic. I can live without YouTube but every so often the application switching (alt-tab) gets slower and begins not showing all applications and the Dash home quits displaying properly. I am sure I am asking a lot of this old machine. What I really want to know is: are there any settings in Ubuntu that allow me to lower the graphic effects (fade-ins, transparencies, fancy transitions, etc) that would be less taxing on the video card?

  Read the article

• Cannot shutdown, computer freezes

  - by Firouziam

  I've installed Ubuntu 12.04 (near windows 7) on my laptop(Dell studio xps 1640 with Ati Radeon HD 3670) and everything is working fine, but when I want to shutdown my computer it freezes! I don't know what to do after that, then I have to use power button to power off the computer and it's not good at all. I don't know what's the problem and I don't know how to figure this out. I installed the graphic card driver (12.6 version) from ATI website and it fixed my problem with playing videos but I think after that this shutdown problem appears! Would you tell me what's the problem and how can I fix it?

  Read the article

< Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >