Search Results

Search found 6772 results on 271 pages for 'rob effect'.

Page 200/271 | < Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >

  • Masking OpenGL texture by a pattern

    - by user1304844
    Tiled terrain. User wants to build a structure. He presses build and for each tile there is an "allow" or "disallow" tile sprite added to the scene. FPS drops right away, since there are 600+ tiles added to the screen. Since map equals screen, there is no scrolling. I came to an idea to make an allow grid covering the whole map and mask the disallow fields. Approach 1: Create allow and disallow grid textures. Draw a polygon on screen. Pass both textures to the fragment shader. Determine the position inside the polygon and use color from allowTexture if the fragment belongs to the allow field, disallow otherwise Problem: How do I know if I'm on the field that isn't allowed if I cannot pass the matrix representing the map (enum FieldStatus[][] (Allow / Disallow)) to the shader? Therefore, inside the shader I don't know which fragments should be masked. Approach 2: Create allow texture. Create an empty texture buffer same size as the allow texture Memset the pixels of the empty texture to desired color for each pixel that doesn't allow building. Draw a polygon on screen. Pass both textures to the fragment shader. Use texture2 color if alpha 0, texture1 color otherwise. Problem: I'm not sure what is the right way to manipulate pixels on a texture. Do I just make a buffer with width*height*4 size and memcpy the color[] to desired coordinates or is there anything else to it? Would I have to call glTexImage2D after every change to the texture? Another problem with this approach is that it takes a lot more work to get a prettier effect since I'm manipulating the color pixels instead of just masking two textures. varying vec2 TexCoordOut; uniform sampler2D Texture1; uniform sampler2D Texture2; void main(void){ vec4 allowColor = texture2D(Texture1, TexCoordOut); vec4 disallowColor = texture2D(Texture2, TexCoordOut); if(disallowColor.a > 0){ gl_FragColor= disallowColor; }else{ gl_FragColor= allowColor; }} I'm working with OpenGL on Windows. Any other suggestion is welcome.

    Read the article

  • What should filenames and URLs of images contain for SEO benefit?

    - by Baumr
    We know that good site architecture usually looks like this: example-company.com/ example-company.com/about/ example-company.com/contact/ example-company.com/products/ example-company.com/products/category/ example-company.com/products/category/productname/ Now, when it comes to Google Image search, it is clear that the img alt tag, filename/URL, and surrounding text (captions, headings, paragraphs) have an effect on ranking. I want to ask about the filename of the images that we should use (e.g. product-photo.jpg). ...but first about the URL: Often web developers stick all images in a single folder in the root: example-company.com/img/ — and I have stopped doing that. (I don't want to get into it, but basically, it seems more semantic for images which make up part of the content at each sub-directory) However, when all images appear in a folder, I feel that their filename needs to reflect what they are a bit more than usual, for example: example-company.com/img/example-company-productname-category.jpg It's a longer filename than just product.png, but as long as it's relevant, I see no problem with regards to SEO (unless you're keyword stuffing), and it could even help rank for keywords: "example company" "productname" "category" So no questions there. But what about when we have places images in the site architecture we outlined at the beginning? In other words, what if image URL paths look like this: example-company.com/products/category/productname/productname.jpg My question is, should the URL be kept short like above and only have the "productname" (and some descriptive keywords) as part of it's filename? Or, should it also include the "example-company" and "category"? Like so: example-company.com/products/category/productname/example-company-category-productname.jpg That seems much longer, and redundant when we look at the URL, but here are a few considerations. Images are often downloaded onto computers, and, to the average user, they lose their original URL and thus — it isn't clear where they came from. Also, some social networks, forums, and other platforms leave the filename intact when uploaded. (Many others rewrite it, for example, Pinterest and Facebook.) Another consideration, will this really help (even if ever so slightly) rank in Google Image Search, or at least inform Google that the product is something specific to the "example-company"? For example, what if this product can only be bought at this store and is the flagship product? In addition to an abundance of internal links to this product page, would having the "example company" name and "category" help it appear in "example company" searches? In other words, is less more?

    Read the article

  • C-states and P-states : confounding factors for benchmarking

    - by Dave
    I was recently looking into a performance issue in the java.util.concurrent (JUC) fork-join pool framework related to particularly long latencies when trying to wake (unpark) threads in the pool. Eventually I tracked the issue down to the power & scaling governor and idle-state policies on x86. Briefly, P-states refer to the set of clock rates (speeds) at which a processor can run. C-states reflect the possible idle states. The deeper the C-state (higher numerical values) the less power the processor will draw, but the longer it takes the processor to respond and exit that sleep state on the next idle to non-idle transition. In some cases the latency can be worse than 100 microseconds. C0 is normal execution state, and P0 is "full speed" with higher Pn values reflecting reduced clock rates. C-states are P-states are orthogonal, although P-states only have meaning at C0. You could also think of the states as occupying a spectrum as follows : P0, P1, P2, Pn, C1, C2, ... Cn, where all the P-states are at C0. Our fork-join framework was calling unpark() to wake a thread from the pool, and that thread was being dispatched onto a processor at deep C-state, so we were observing rather impressive latencies between the time of the unpark and the time the thread actually resumed and was able to accept work. (I originally thought we were seeing situations where the wakee was preempting the waker, but that wasn't the case. I'll save that topic for a future blog entry). It's also worth pointing out that higher P-state values draw less power and there's usually some latency in ramping up the clock (P-states) in response to offered load. The issue of C-states and P-states isn't new and has been described at length elsewhere, but it may be new to Java programmers, adding a new confounding factor to benchmarking methodologies and procedures. To get stable results I'd recommend running at C0 and P0, particularly for server-side applications. As appropriate, disabling "turbo" mode may also be prudent. But it also makes sense to run with the system defaults to understand if your application exhibits any performance sensitivity to power management policies. The operating system power management sub-system typically control the P-state and C-states based on current and recent load. The scaling governor manages P-states. Operating systems often use adaptive policies that try to avoid deep C-states for some period if recent deep idle episodes proved to be very short and futile. This helps make the system more responsive under bursty or otherwise irregular load. But it also means the system is stateful and exhibits a memory effect, which can further complicate benchmarking. Forcing C0 + P0 should avoid this issue.

    Read the article

  • USB Drive Warm Boot Issue. Cold boot = Perfect. Warm boot = "No boot sector found on USB device"

    - by Dan
    I'm experiencing a boot/reboot quirk similar to, yet somewhat different from others posted here. I have two Western Digital "Passport" external USB2 drives (160GB and 320GB) with Ubuntu 11.10 installed. The BIOS on my laptop is set to boot USB drives before the internal drive, and it works well. Either drive will cold-boot Ubuntu 11.10 perfectly. However, at times the computer must be restarted (warm boot) to have software updates or other changes take effect. When I warm-boot the computer, the computer goes through its normal shutdown/restart, then the usual BIOS tests, at which time the USB drive is selected momentarily (as normal), and that's when the trouble starts. I get a "No boot sector found on USB device", and the computer proceeds to boot Windows from the internal drive. If I press F12 early during the restart sequence (allows manual selection of the boot sequence), USB is still shown before the internal drive on the sequence list (as it should be). If I highlight "USB" and press ENTER, I still get a "No boot sector..." error message, but the external USB drive then proceeds to boot Ubuntu normally. I have a third external USB drive (Western Digital 160 GB Media Center) that cold-boots and warm-boots perfectly, so I know everything in the computer is set up properly. It also tells me Ubuntu is set up correctly on the drives, as all three drives were done identically, and at the same time. I've tried formatting the Passport drives NTFS and FAT32, but it didn't change anything. If I power-down the computer, then start it up again, it will boot Ubuntu from either of the Passport drives perfectly - every time. It's as if during a warm boot the Passport drives are somehow looking for the boot loader in the wrong location on the drive - yet either drives works when booting from a cold start. Not a show-stopper .. but frustrating. Computer is a Dell XPS M1530, A12 BIOS (latest), but I don't think the computer plays into the issue because one of the three drives works at all times. It's only the two WD Passport models at issue here. Thanks!

    Read the article

  • How can I convince IE to honor my explicit instructions to make a table column X pixels wide? [migrated]

    - by AnthonyWJones
    Please consider this small but complete chunk of HTML: <!DOCTYPE html > <html> <head> <title>Test</title> <style type="text/css"> span {overflow:hidden; white-space:nowrap; } td {overflow:hidden; text-overflow:ellipsis} </style> </head> <body> <table cellspacing="0" > <tbody> <tr> <td nowrap="nowrap" style="max-width:30px; width:30px; white-space:nowrap; "><span>column 1</span></td> <td nowrap="nowrap" style="max-width:30px; width:30px; white-space:nowrap; "><span>column 2</span></td> <td nowrap="nowrap" style="max-width:30px; width:30px; white-space:nowrap; "><span>column 3</span></td> </tr> </tbody> </table> </body> </html> If you render the above in Chrome you'll see the effect I'm looking for. However render it in IE8 or 9 the width and/or max-width is ignored. So my question is how do get IE to simply let me specify the width of a cell explicitly? BTW, I've tried various combinations of table-layout:fixed and using colgroup with cols and all sorts, nothing I've tried convinces IE to what I'm clearly asking it to explicitly do? If I had any hair before starting this I wouldn't have any left by now.

    Read the article

  • Pragmas and exceptions

    - by Darryl Gove
    The compiler pragmas: #pragma no_side_effect(routinename) #pragma does_not_write_global_data(routinename) #pragma does_not_read_global_data(routinename) are used to tell the compiler more about the routine being called, and enable it to do a better job of optimising around the routine. If a routine does not read global data, then global data does not need to be stored to memory before the call to the routine. If the routine does not write global data, then global data does not need to be reloaded after the call. The no side effect directive indicates that the routine does no I/O, does not read or write global data, and the result only depends on the input. However, these pragmas should not be used on routines that throw exceptions. The following example indicates the problem: #include <iostream extern "C" { int exceptional(int); #pragma no_side_effect(exceptional) } int exceptional(int a) { if (a==7) { throw 7; } else { return a+1; } } int a; int c=0; class myclass { public: int routine(); }; int myclass::routine() { for(a=0; a<1000; a++) { c=exceptional(c); } return 0; } int main() { myclass f; try { f.routine(); } catch(...) { std::cout << "Something happened" << a << c << std::endl; } } The routine "exceptional" is declared as having no side effects, however it can throw an exception. The no side effects directive enables the compiler to avoid storing global data back to memory, and retrieving it after the function call, so the loop containing the call to exceptional is quite tight: $ CC -O -S test.cpp ... .L77000061: /* 0x0014 38 */ call exceptional ! params = %o0 ! Result = %o0 /* 0x0018 36 */ add %i1,1,%i1 /* 0x001c */ cmp %i1,999 /* 0x0020 */ ble,pt %icc,.L77000061 /* 0x0024 */ nop However, when the program is run the result is incorrect: $ CC -O t.cpp $ ./a.out Something happend00 If the code had worked correctly, the output would have been "Something happened77" - the exception occurs on the seventh iteration. Yet, the current code produces a message that uses the original values for the variables 'a' and 'c'. The problem is that the exception handler reads global data, and due to the no side effects directive the compiler has not updated the global data before the function call. So these pragmas should not be used on routines that have the potential to throw exceptions.

    Read the article

  • SQL Saturday 43 (Redmond, WA) Review

    - by BuckWoody
    Last Saturday (June 12th) we held a “SQL Saturday” (more about those here) event in Redmond, Washington. The event was held at the Microsoft campus, at the Mixer in our new location called the “Commons”. This is a mall-like area that we have on campus, and the Mixer is a large building with lots of meeting rooms, so it made a perfect location for the event. There was a sign to find the parking, and once there they had a sign to show how to get to the building. Since it’s a secure facility, Greg Larsen and crew had a person manning the door so that even late arrivals could get in. We had about 400 sign up for the event, and a little over 300 attend (official numbers later). I think we would have had a lot more, but the sun was out – and you just can’t underestimate the effect of that here in the Pacific Northwest. We joke a lot about not seeing the sun much, but when a day like what we had on Saturday comes around, and on a weekend at that, you’d cancel your wedding to go outside to play in the sun. And your spouse would agree with you for doing it. We had some top-notch speakers, including Clifford Dibble and Kalen Delany. The food was great, we had multiple sponsors (including Confio who seems to be at all of these) and the attendees were from all over the professional spectrum, from developers to BI to DBA’s. Everyone I saw was very engaged, and when I visited room-to-room I saw almost no one in the halls – everyone was in the sessions. I also saw a much larger Microsoft presence this year, especially from Dan Jones’ team. I had a great turnout at my session, and yes, I was wearing an Oracle staff shirt. I did that because I wanted to show that the session I gave on “SQL Server for the Oracle DBA” was non-marketing – I couldn’t exactly bash Oracle wearing their colors! These events are amazing. I can’t emphasize enough how much I appreciate the volunteers and how much work they put into these events, and to you for coming. If you’re reading this and you haven’t attended one yet, definitely find out if there is one in your area – and if not, start one. It’s a lot of work, but it’s totally worth it.       Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Creating smooth lighting transitions using tiles in HTML5/JavaScript game

    - by user12098
    I am trying to implement a lighting effect in an HTML5/JavaScript game using tile replacement. What I have now is kind of working, but the transitions do not look smooth/natural enough as the light source moves around. Here's where I am now: Right now I have a background map that has a light/shadow spectrum PNG tilesheet applied to it - going from darkest tile to completely transparent. By default the darkest tile is drawn across the entire level on launch, covering all other layers etc. I am using my predetermined tile sizes (40 x 40px) to calculate the position of each tile and store its x and y coordinates in an array. I am then spawning a transparent 40 x 40px "grid block" entity at each position in the array The engine I'm using (ImpactJS) then allows me to calculate the distance from my light source entity to every instance of this grid block entity. I can then replace the tile underneath each of those grid block tiles with a tile of the appropriate transparency. Currently I'm doing the calculation like this in each instance of the grid block entity that is spawned on the map: var dist = this.distanceTo( ig.game.player ); var percentage = 100 * dist / 960; if (percentage < 2) { // Spawns tile 64 of the shadow spectrum tilesheet at the specified position ig.game.backgroundMaps[2].setTile( this.pos.x, this.pos.y, 64 ); } else if (percentage < 4) { ig.game.backgroundMaps[2].setTile( this.pos.x, this.pos.y, 63 ); } else if (percentage < 6) { ig.game.backgroundMaps[2].setTile( this.pos.x, this.pos.y, 62 ); } // etc... (sorry about the weird spacing, I still haven't gotten the hang of pasting code in here properly) The problem is that like I said, this type of calculation does not make the light source look very natural. Tile switching looks too sharp whereas ideally they would fade in and out smoothly using the spectrum tilesheet (I copied the tilesheet from another game that manages to do this, so I know it's not a problem with the tile shades. I'm just not sure how the other game is doing it). I'm thinking that perhaps my method of using percentages to switch out tiles could be replaced with a better/more dynamic proximity forumla of some sort that would allow for smoother transitions? Might anyone have any ideas for what I can do to improve the visuals here, or a better way of calculating proximity with the information I'm collecting about each tile? (PS: I'm reposting this from Stack Overflow at someone's suggestion, sorry about the duplicate!)

    Read the article

  • cocos2d-x simple shader usage [on hold]

    - by Narek
    I want to obtain color ramp effect from this tutorial: http://www.raywenderlich.com/10862/how-to-create-cool-effects-with-custom-shaders-in-opengl-es-2-0-and-cocos2d-2-x Here is my code in cocos2d-x 3: bool HelloWorld::init() { ////////////////////////////// // 1. super init first if ( !Layer::init() ) { return false; } Vec2 origin = Director::getInstance()->getVisibleOrigin(); sprite = Sprite::create("HelloWorld.png"); sprite->setAnchorPoint(Vec2(0, 0)); sprite->setRotation(3); sprite->setPosition(origin); addChild(sprite); std::string str = FileUtils::getInstance()->getStringFromFile("CSEColorRamp.fsh"); const GLchar * fragmentSource = str.c_str(); GLProgram* p = GLProgram::createWithByteArrays(ccPositionTextureA8Color_vert, fragmentSource); p->bindAttribLocation(GLProgram::ATTRIBUTE_NAME_POSITION, GLProgram::VERTEX_ATTRIB_POSITION); p->bindAttribLocation(GLProgram::ATTRIBUTE_NAME_TEX_COORD, GLProgram::VERTEX_ATTRIB_TEX_COORD); p->link(); p->updateUniforms(); sprite->setGLProgram(p); // 3 colorRampUniformLocation = glGetUniformLocation(sprite->getGLProgram()->getProgram(), "u_colorRampTexture"); glUniform1i(colorRampUniformLocation, 1); // 4 colorRampTexture = Director::getInstance()->getTextureCache()->addImage("colorRamp.png"); colorRampTexture->setAliasTexParameters(); // 5 sprite->getGLProgram()->use(); glActiveTexture(GL_TEXTURE1); glBindTexture(GL_TEXTURE_2D, colorRampTexture->getName()); glActiveTexture(GL_TEXTURE0); return true; } And here is the fragment shader as it is in the tutorial: #ifdef GL_ES precision mediump float; #endif // 1 varying vec2 v_texCoord; uniform sampler2D u_texture; uniform sampler2D u_colorRampTexture; void main() { // 2 vec3 normalColor = texture2D(u_texture, v_texCoord).rgb; // 3 float rampedR = texture2D(u_colorRampTexture, vec2(normalColor.r, 0)).r; float rampedG = texture2D(u_colorRampTexture, vec2(normalColor.g, 0)).g; float rampedB = texture2D(u_colorRampTexture, vec2(normalColor.b, 0)).b; // 4 gl_FragColor = vec4(rampedR, rampedG, rampedB, 1); } As a result I get a black screen with 2 draw calls. What is wrong? Do I miss something?

    Read the article

  • SEO effects of intermix of WP blog, custom PHP site and FB app game

    - by melbournetechlover
    We're a melbourne tech company in the process of building a custom site in PHP. We plan to launch a "pre-launch" page which is also custom coded (CSS3 on twitter bootstrap framework + HTML5 front end and PHP back end). On that site will be a link to a blog - the idea behind this is to build up ranking for a variety of relevant keywords prior to the full site going live (given the majority of the site is a member only community anyway so the blog is really the main way we'll be able to execute on-site SEO. Ideally, we would like to install wordpress in a subdirectory on our servers and just customise the header to look the same as the landing page of the website. But some questions and concerns... Is there any detrimental effect on SEO efforts in having two separate systems (one custom PHP, the other an installation of wordpress) to manage the blog vs the rest of the site? Are there any benefits or detriments to installing on a sub domain such as blog.sitename.com vs. sitename.com/blog. My preference would be sitename.com/blog as it feels neater - but open to suggestions based on knowledge of Google preferences. Separately, we are building a Facebook app which is under another site name. Again because we are launching this app first, from an SEO perspective, would it actually be better to run it from a sub domain on the main site - e.g. gamename.mainsitename.com instead of on app.gamename.com? Currently we have it on app.gamename.com, but if there are SEO benefits to moving it to the other domain and server then we'll do it. Basically we don't want to have our SEO efforts divided - will Google algorithms prefer two sites heavily referring traffic, or is it better to focus our efforts on one. I guess that's the crux of the issue. But the other one is - does Google care about traffic accessing a page built for the Facebook app iFrame - does that count toward rankings? Sorry I hope these questions aren't too complex - but we're in the tech world every day and still can't seem to find a good answer to these ones...hence I'm taking to the forums!! Free beer for whoever can give me a solid answer!

    Read the article

  • My co-worker has not been doing such a good job for the past decade. What do I do? [closed]

    - by stijn
    Possible Duplicate: How do I approach a coworker about his or her code quality? I started working with him almost a decade ago and back then I had never really programmed before, being a young hardware engineer. Right now however I have made quite some progress in all areas being part of software design and i am much, much more skilled than my co-worker who is 15 years older and has been programming more than twice as long. He is super nice and definitely smart enough, but lately his lack of skill and performance are starting to drag me down because we're more and more working on the same codebase. And soon we are going to do a quite ambitious start from scratch creating a whole new hard/software system. I feel it is time to address all issues now, but i do not know how to start. Here are some of the things that I would like to see him improve on: no consistent usage of style, spaces nor tabs (eg if(something ) a =b ) adds newlines around pieces of code to make it easier to read, then commits those with messages like 'no changes made' overall commit messages are useless and so are most of the comments, if there are any (eg 'remove solves for bug Rik' if Rik reported a bug). There is no function/class documentation. lots of spelling errors, in both English and native language, which sometimes are mixed 6/7/8 level deep deep nesting is no exception, a lot of functions start with one level already like if(ptr!=Null){ even when ptr is the result of allocation via new in the constructor numerous source files have over 10k lines of those lines, a major part is simply a result of copy-pasting functionality instead of using a function. This includes copying comments so we end up with 50 occurrences of var=NULL; //TODO TEST this!!!!!!! another part is hundreds of lines of dead code knows what versioning does, yet comments out old code and places new code underneath it when making changes coding skills are below par, especially for the type of rather high precision applications we do. Yet somehow, after a lot of trying and testing, stuff starts to work. But then breaks again some time later because every change casues a waterfall effect. violates every single item in the C++ FAQ lite, practices every bad practice I can think of still doesn't know how to properly use the debugger, but spends hours inspecting messy logfiles in notepad on a tiny laptop screen. Does not make any adjustments to the settings of the software he uses. Never uses keyboard shortcuts. does not seem to progress or learn new things at all. Work rather slow, mostly due to the lack of planning and incorrect usage of tools. How does one deal with this? For starters, how do I make him aware of all these problems? Should I tell the staff about it? And the next step, how to get him to learn new things and adopt another way of working?

    Read the article

  • Using elapsed time for SlowMo in XNA

    - by Dave Voyles
    I'm trying to create a slow-mo effect in my pong game so that when a player is a button the paddles and ball will suddenly move at a far slower speed. I believe my understanding of the concepts of adjusting the timing in XNA are done, but I'm not sure of how to incorporate it into my design exactly. The updates for my bats (paddles) are done in my Bat.cs class: /// Controls the bat moving up the screen /// </summary> public void MoveUp() { SetPosition(Position + new Vector2(0, -moveSpeed)); } /// <summary> /// Controls the bat moving down the screen /// </summary> public void MoveDown() { SetPosition(Position + new Vector2(0, moveSpeed)); } /// <summary> /// Updates the position of the AI bat, in order to track the ball /// </summary> /// <param name="ball"></param> public virtual void UpdatePosition(Ball ball) { size.X = (int)Position.X; size.Y = (int)Position.Y; } While the rest of my game updates are done in my GameplayScreen.cs class (I'm using the XNA game state management sample) Class GameplayScreen { ........... bool slow; .......... public override void Update(GameTime gameTime, bool otherScreenHasFocus, bool coveredByOtherScreen) base.Update(gameTime, otherScreenHasFocus, false); if (IsActive) { // SlowMo Stuff Elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; if (Slowmo) Elapsed *= .8f; MoveTimer += Elapsed; double elapsedTime = gameTime.ElapsedGameTime.TotalMilliseconds; if (Keyboard.GetState().IsKeyDown(Keys.Up)) slow = true; else if (Keyboard.GetState().IsKeyDown(Keys.Down)) slow = false; if (slow == true) elapsedTime *= .1f; // Updating bat position leftBat.UpdatePosition(ball); rightBat.UpdatePosition(ball); // Updating the ball position ball.UpdatePosition(); and finally my fixed time step is declared in the constructor of my Game1.cs Class: /// <summary> /// The main game constructor. /// </summary> public Game1() { IsFixedTimeStep = slow = false; } So my question is: Where do I place the MoveTimer or elapsedTime, so that my bat will slow down accordingly?

    Read the article

  • Help with Strategy-game AI

    - by f20k
    Hi, I am developing a strategy-game AI (think: Final Fantasy Tactics), and I am having trouble coming up for the design of the AI. My main problem is determining which is the optimal thing for it to do. First let me describe the priority of what action I would like the AI to take: Kill nearest player unit Fulfill primary directive (kill all player units, kill target unit, survive for x turns) Heal ally unit / cast buffer Now the AI can do the following in its turn: Move - {Attack / Ability / Item} (either attack or ability or item) {Attack / Ability / Item} - Move Move closer (if targets not in range) {Attack / Ability / Item} (if move not available) Notes Abilities have various ranges / effects / costs / effects. Each ai unit has maybe 5-10 abilities to choose from. The AI will prioritize killing over safety unless its directive is to survive for x turns. It also doesn't care about ability cost much. While a player may want to save a big spell for later, the AI will most likely use it asap. Movement is on a (hex) grid num of player units: 3-6 num of ai units: 3-7 or more. Probably max 10. AI and player take turns controlling ONE unit, instead of all at the same time. Platform is Android (if program doesnt respond after some time, there will be a popup saying to Force Quit or Wait - which looks really bad!). Now comes the questions: The best ability to use would obviously be the one that hits the most targets for the most damage. But since each ability has different ranges, I won't know if they are in range without exploring each possible place I can move to. One solution would be to go through each possible places to move to, determine the optimal attack at that location - which gives me a list of optimal moves for each location. Then choose the optimal out of the list and execute it. But this will take a lot of CPU time. Is there a better solution? My current idea is to move as close as possible towards the closest, largest group of people, and determine the optimal attack/ability from there. I think this would be a lot less work for the CPU and still allow for wide-range attacks. Its sub-optimal but the AI will still seem 'smart'. Other notes/questions: Am I over-thinking/over-complicating it? Better solution? I am open to all sorts of suggestions I have taken a look at the spell-casting question, but it doesn't take into account the movement - so perhaps use that algo for each possible move location? The top answer mentioned it wasn't great for area-of-effect and group fights - so maybe requires more tweaking? Please, if you mention a graph/tree, let me know basically how to use it. E.g. Node means ability, level corresponds to damage, then search for the deepest node.

    Read the article

  • How to Add a Taskbar to the Desktop in Ubuntu 14.04

    - by Lori Kaufman
    If you’ve switched to Ubuntu from Windows, it may take some time to get used to the new and different interface. However, you can easily incorporate a familiar Windows feature, the Taskbar, into Ubuntu to make the transition easier. A tool called Tint2 provides a bar at the bottom of the Ubuntu Desktop that resembles the Windows Taskbar. We will show you how to install it and make it start every time you log into Ubuntu. NOTE: When we say to type something in this article and there are quotes around the text, DO NOT type the quotes, unless we specify otherwise. Press Ctrl + Alt + T to open a Terminal window. To install Tint2, type the following line at the prompt and press Enter. sudo apt-get install tint2 Type your password at the prompt and press Enter. The progress of the installation displays and then a message displays saying how much disk space will be used. When asked if you want to continue, type a “y” and press Enter. When the installation has finished, close the Terminal window by typing “exit” at the prompt and pressing Enter. Click the Search button at the top of the Unity bar. Start typing “startup applications” in the Search box. Items that match what you type start displaying below the Search box. When the Startup Applications tool displays, click the icon to open it. On the Startup Applications Preferences window, click Add. On the Add Startup Program dialog box, enter a name for the startup application. This name displays in the list on the Startup Applications Preferences window. Type “tint2” in the Command edit box, enter a description in the Comment edit box, if desired, and click Add. Tint2 is added as a startup program and will start every time you log into Ubuntu. Click Close to close the Startup Applications Preferences window. Log out and log back in to make the Taskbar available on the desktop. You do not need to reboot the computer for this change to take effect. Now, when you minimize a program, an icon for it displays on the Taskbar at the bottom of the screen, just like the Taskbar in Windows. If you decide that you don’t want the Taskbar to display every time you log into Ubuntu, you can uncheck the Tint2 startup program on the Startup Applications Preferences window. You don’t need to delete it from the list.

    Read the article

  • New computer hangs on shutdown/reboot, how to troubleshoot?

    - by Torben Gundtofte-Bruun
    My system is working perfectly but it freezes during shutdown/reboot/suspend/hibernate: All windows and the menu bar disappear but the desktop wallpaper remains. It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown console text. The system is brand-new and fully updated using Update Manager. How can I determine what is causing the freeze? Is there a log I can investigate? How can I fix this? I see no obvious cause of the freeze. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing shutdown right from the login screen). What I've tried so far: Based on other questions (this, this, and this) that suggest some ACPI settings, I've tried sudo shutdown -h now to see whether the shutdown console text display offers any hints, but the system doesn't even get that far - it still freezes while the screen shown the desktop background image, without any toolbars. Only sudo shutdown --force works, but that's not a solution. Editing the grub menu to add acpi=off to the kernel didn't help. I guess there's not much point in trying the other (lesser) ACPI suggestions? Adding noapic to the grub entry had no discernible effect. Adding nolapic instead did something (I had removed the quiet option) - the system managed to continue further with the shutdown, right until the line Checking for running unattended-upgrades: which were the last characters on the screen. I've also checked the system BIOS, especially regarding power options, but didn't see anything out of the ordinary. Switching the BIOS standby setting from S3 to S1 didn't help. The standby setting can't be disabled, and there are no other ACPI-related settings AFAIK. BIOS reset didn't help. Not surprised; hadn't changed anything. I tried going to a virtual console (CtrlAltF1) as suggested by djeikyb and from there did a shutdown -h now and it froze there too, after this console output. I didn't try killing processes one at a time because I'm still too newbie to figure out how to do that. Booting with kernel 2.6.35.22 rather than 2.6.35.25 didn't help. Disabling the Nvidia drivers didn't help. Booting from Live CD (USB stick in fact) didn't help; it freezes the same way. Booting from Live CD, with acpi=off noapic nolapic didn't help either. Neither did just nolapic. So evidently this is not some custom setting in my install, but some sort of basic issue. MemTest competed in 1 hour without errors.

    Read the article

  • Feedback from SQLBits 8

    - by Peter Larsson
    This years SQLBits occurred in Brighton. Although I didn’t have the opportunity to attend the full conference, I did a presentation at Saturday. Getting to Brighton was easy. Drove to Copenhagen airport at 0415, flew 0605 and arrived at Gatwick 0735. Then I took the direct train to Brighton and showed up at 0830, just one hour before presenting. This was the easy part. Getting home was much worse. Presentation ended at 1030 and I had to rush to the train station to get back to London, change to tube for Heathrow. Made it at the gate just 15 seconds before closing. That included a half mile run in the airport… Anyway, yesterday I got the feedback for my presentation. It does look good, especially since English is not my first language. This is the first graph Seems to be just halfway between conference average and best session. I can live with that. Second graph shows more detail about attendees voting. It also look acceptable. A wider spread for the 9’s, but it is an inevitable effect from how attendees percept the session. I did get a lot of 8’s and the lower grades in an descending order. The two people voting 4 and 5 didn’t say why they voted this so I don’t know how to remedy this. Third graph is about each category of votes.   Again, I find this acceptable. The Session abstract and Speaker’s knowledge seems to follow attendees expectations compared to conference average. I seem to have met the attendees expectations (and some more) for the other four categories, also compared to conference average. Since this did encourage me, I believe I will present some more at future meetings. I do have a new presentation about something all developers are doing every day but they may not know it. I will also cover this new topic in the next Deep Dives II book. Stay tuned! //Peter

    Read the article

  • SQL Saturday 43 (Redmond, WA) Review

    - by BuckWoody
    Last Saturday (June 12th) we held a “SQL Saturday” (more about those here) event in Redmond, Washington. The event was held at the Microsoft campus, at the Mixer in our new location called the “Commons”. This is a mall-like area that we have on campus, and the Mixer is a large building with lots of meeting rooms, so it made a perfect location for the event. There was a sign to find the parking, and once there they had a sign to show how to get to the building. Since it’s a secure facility, Greg Larsen and crew had a person manning the door so that even late arrivals could get in. We had about 400 sign up for the event, and a little over 300 attend (official numbers later). I think we would have had a lot more, but the sun was out – and you just can’t underestimate the effect of that here in the Pacific Northwest. We joke a lot about not seeing the sun much, but when a day like what we had on Saturday comes around, and on a weekend at that, you’d cancel your wedding to go outside to play in the sun. And your spouse would agree with you for doing it. We had some top-notch speakers, including Clifford Dibble and Kalen Delany. The food was great, we had multiple sponsors (including Confio who seems to be at all of these) and the attendees were from all over the professional spectrum, from developers to BI to DBA’s. Everyone I saw was very engaged, and when I visited room-to-room I saw almost no one in the halls – everyone was in the sessions. I also saw a much larger Microsoft presence this year, especially from Dan Jones’ team. I had a great turnout at my session, and yes, I was wearing an Oracle staff shirt. I did that because I wanted to show that the session I gave on “SQL Server for the Oracle DBA” was non-marketing – I couldn’t exactly bash Oracle wearing their colors! These events are amazing. I can’t emphasize enough how much I appreciate the volunteers and how much work they put into these events, and to you for coming. If you’re reading this and you haven’t attended one yet, definitely find out if there is one in your area – and if not, start one. It’s a lot of work, but it’s totally worth it.       Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Homepage issue on Google [closed]

    - by nico
    We have recently updated our website www.blinds4uk.co.uk with a new homepage containing additional features and more on page content but since then we have lost primary keyword positions and the home page has disappeared completely. The only time it appears is for an exact search ‘blinds4uk’. Today I took snippets of 'unique content' from the homepage and put this into the 'google search' but our homepage was nowhere to be found. When I did the same in ‘Yahoo’ the homepage came up. Are we missing something? We ranked in the top 4 for primary kw terms 'blinds uk' & 'uk blinds' but now we don’t show anywhere for these terms. Our homepage has never ranked well for the primary kw 'blinds' yet our internal pages rank very well with many pages on page 1 of google uk. We employed an SEO firm for 9 months to help us establish issues with the homepage but they never could, so we got rid. We have been trying to get to the root cause of why the homepage ranks so poorly for a number of years and only yesterday we established that we had the meta tag directly below the tag and our title & meta description were further down the page; we have today corrected. Not sure what effect this would have on the way Google reads the homepage but we are trying everything to try and get the homepage ranking fro those primary kw's. Our current developers & ex SEO guys are all part of the same company and cannot pin-point anything other than saying carryon with their SEO team because it will take time but just comes across as a milking exercise. Another thing which I have found very strange is the data from our 'traffic audience'. We are a UK based website yet our traffic stats were showing as;- UK 36.6%, Denmark 35.8% and India 27.6%. – don’t make sense to me! Is there anybody out there that could simply point us in the right direction to the problem(s), so we can fix once and for all? Could there be anything within the code that is causing the home page not to display within google for our primary kw's terms such as blinds, window blinds etc. I would appreciate any advice at all that may help us in our quest to sort this homepage issue once and for all

    Read the article

  • How should I land my next consulting gig? [closed]

    - by MrOodles
    For the last couple of years, I've been working on speculative projects, expanding my skillset with side work, and paying the bills while having a blast consulting for startups. However, for a number of personal reasons, I need to spend the next 6-9 months maximizing my cash income. I want to put this into effect starting in early August. So that means I have one month to put the necessary client list/portfolio/resume together to start making this happen. As a programmer, I am very proficient in building Django web apps. I can write the necessary SQL, python, javascript, and css to build every part of a Django app, and then do the system administration necessary to deploy on AWS using EC2. I can also rig up a CDN to work seemlessly with the app using S3 and Cloudfront. I have built GIS applications using GeoDjango and PostGIS, and I have constructed social video apps by implementing Encoding.com as a service to prepare raw video files for consumption on the web. I am also moderately proficient in programming PHP, Java, and C#. I have built web apps in PHP, and desktop apps in Java and C#. I have dabbled with Android applications and iPhone apps, but nothing I would show off. I have experience doing SEO, social media marketing, and content marketing. Many of my clients have needed their apps promoted after they were built, and I was always happy to oblige when I could. I have also worked with biometrics technology including fingerprints for government contractors. This was as much a business analyst role as it was a programming gig, as I had to help answer RFPs, make checklists, and work around reems and reems of regulations to build applications that met very large bureaucratic requirements. I only have two real requirements for my next gig(s): 1) Work remotely. I live in North East Ohio, and I don't plan on leaving, but I wouldn't mind traveling one or two weeks out of every month to service clients who need on-site help. 2) $60.00hr-$∞ USD contracting rate. So what should I do for the next 30 days to achieve this? Should I target some large company and learn the requisite buzzwords to impress them? Should I learn some new language or technology? Polish some skill that I already have? Should I build something using my current skillset, or with some new technology? Should I put a website for my consultancy together to market myself? Should I do that using latest technology x, y, and z? Or should I just slap something up on Tumblr? I'm willing to do anything (moral) over the next 4 weeks to put myself into a position to maximize my income, and I'm open to all and every idea Programmers users may have. Let me hear them.

    Read the article

  • Why Java's JMF doesn't work in Linux?

    - by Visruth CV
    I got to do some image processing program in java using Linux. I chose to use the JMF for my camera (a webcam) access. But my program is not able to access the camera. But, the jmf works well in Windows. I downloaded jmf from oracle.com and I tried to install it in 'Ubuntu 10.10-the Maverick-released in October 2010 and supported until April 2012'. The downloaded file was a .bin file. I got the below output (last part of the output) when I tried the command provided by oracle /bin/sh ./jmf-2_1_1e-linux-i586.bin. For inquiries please contact: Sun Microsystems, Inc. 4150 Network Circle, Santa Clara, California 95054. LFI# 129621/Form ID#011801 Do you agree to the above license terms? [yes or no] yes Permit recording from an applet? (see readme.html) [yes or no] yes Permit writing local files from an applet? (recommend no, see readme.html) [yes or no] yes Unpacking... tail: cannot open `+309' for reading: No such file or directory Extracting... ./install.sfx.4140: 1: cannot open ==: No such file ./install.sfx.4140: 1: ==: not found ./install.sfx.4140: 3: Syntax error: ")" unexpected chmod: cannot access `JMF-2.1.1e/bin/jmstudio': No such file or directory chmod: cannot access `JMF-2.1.1e/bin/jmfregistry': No such file or directory chmod: cannot access `JMF-2.1.1e/bin/jmfinit': No such file or directory ./jmf-2_1_1e-linux-i586.bin: 305: JMF-2.1.1e/bin/jmfinit: not found /bin/cp: cannot stat `JMF-2.1.1e/lib/jmf.properties': No such file or directory Done. When try the same command again, getting nothing in the terminal (console). visruth@laptop:~/Desktop/mobileapps$ /bin/sh ./jmf-2_1_1e-linux-i586.bin visruth@laptop:~/Desktop/mobileapps$ Now, I'm not sure that whether it is properly installed or not.Whatever, I'm not getting camera access in my programme. I checked out the driver of the camera, it is available in the os itself I think because other softwares are able to access the camera (web cam). I tried it on both desktop and laptop, but no effect... Is there any solution for the problem?

    Read the article

  • Are closures with side-effects considered "functional style"?

    - by Giorgio
    Many modern programming languages support some concept of closure, i.e. of a piece of code (a block or a function) that Can be treated as a value, and therefore stored in a variable, passed around to different parts of the code, be defined in one part of a program and invoked in a totally different part of the same program. Can capture variables from the context in which it is defined, and access them when it is later invoked (possibly in a totally different context). Here is an example of a closure written in Scala: def filterList(xs: List[Int], lowerBound: Int): List[Int] = xs.filter(x => x >= lowerBound) The function literal x => x >= lowerBound contains the free variable lowerBound, which is closed (bound) by the argument of the function filterList that has the same name. The closure is passed to the library method filter, which can invoke it repeatedly as a normal function. I have been reading a lot of questions and answers on this site and, as far as I understand, the term closure is often automatically associated with functional programming and functional programming style. The definition of function programming on wikipedia reads: In computer science, functional programming is a programming paradigm that treats computation as the evaluation of mathematical functions and avoids state and mutable data. It emphasizes the application of functions, in contrast to the imperative programming style, which emphasizes changes in state. and further on [...] in functional code, the output value of a function depends only on the arguments that are input to the function [...]. Eliminating side effects can make it much easier to understand and predict the behavior of a program, which is one of the key motivations for the development of functional programming. On the other hand, many closure constructs provided by programming languages allow a closure to capture non-local variables and change them when the closure is invoked, thus producing a side effect on the environment in which they were defined. In this case, closures implement the first idea of functional programming (functions are first-class entities that can be moved around like other values) but neglect the second idea (avoiding side-effects). Is this use of closures with side effects considered functional style or are closures considered a more general construct that can be used both for a functional and a non-functional programming style? Is there any literature on this topic? IMPORTANT NOTE I am not questioning the usefulness of side-effects or of having closures with side effects. Also, I am not interested in a discussion about the advantages / disadvantages of closures with or without side effects. I am only interested to know if using such closures is still considered functional style by the proponent of functional programming or if, on the contrary, their use is discouraged when using a functional style.

    Read the article

  • SQL Saturday 194 - Exeter

    - by Dave Ballantyne
    Many kudos goes to Jonathan and Annette Allen and the others on the team for confirming SQL Saturday 194 in Exeter on the 8th and 9th of March.  The event home page is here http://www.sqlsaturday.com/194/eventhome.aspx and I delighted that myself and Dave Morrison will be presenting a full day pre-con on the 8th on favourite subjects “TSQL and Internals”. Here is the full abstract : TSQL and internals - When faced with performance issues there are many lines of attack. Tuning the engine itself can get you so far, however for maximum effect you need to understand how the engine and how it translates SQL statements into performable actions. This is not a simple task, it is a massive task to deal with a multi-table join and the number of permutations can be immense. To back up this knowledge, we can create better performing TSQL and understand the impact that is has upon the engine and recognize the pitfalls and gotcha’s that exist in SQLServer. Ultimately, there is no ‘best way’ to perform a single task only many variations of ‘it depends’ , but now we can pick the most appropriate option for the required dataload. Over the years, there have been many myths and misconceptions have grown around the product, some have basis in older versions and some are just wrong. Continuing to build on the knowledge given so far these issue will be explored and broken down and proved or disproved. Finally we will look to the future and explore SQL Server 2012 and the new functionality that that brings and some of the common uses that we will be able to address. After completion of this days pre-con, attendees will have a more complete knowledge of execution plans, and how they relate to the physical and logical actions that SQLServer will be executing on their behalf. The attendees will also have a more rounded and fuller knowledge of TSQL and the implications of incorrectly defining a query. Dave is a fountain of knowledge on execution plans and optimizer internals and ,though i may flatter myself, I’m no shrinking violet when it comes to TSQL and such matters.  I hope that if you cant join us, then there are other pre-cons available from other experts in their fields that may ‘float you boat’ too.  The pre-con page is http://sqlsouthwest.co.uk/SQLSaturday_precon.htm Also, excitingly, this pre-con day is sponsored by Fusion-IO which is a great boon for the day. If you want a more of this then i am offering a 2 day TSQL course starting on the 19th of March. More details on this are available here

    Read the article

  • If most of team can't follow the architecture, what do you do?

    - by Chris
    Hi all, I'm working on a greenfields project with two other developers. We're all contractors, and myself and one other just started working on the project while the orginal one has been doing most of the basic framework coding. In the past month, my fellow programmer and I have been just frustrated by the design descisions done by our co-worker. Here's a little background information: The application at face value appeared to be your standard n-layered web application using C# on the 3.5 framework. We have a data layer, business layer and a web interface. But as we got deeper into the project we found some very interesting things that have caused us some troubles. There is a custom data access sqlHelper type base which only accepts dictionary key/valued entries and returns only data tables. There are no entity objects, but there are some massive objects which do everything and then are tossed into session for persitance. The general idea is that the pages (.aspx) don't do anything, while the controls (.ascx) do everything. The general flow is that a client clicks on a button, which goes to a user control base which passes a process request to the 'BLL' class which goes to the page processor, which then goes to a getControlProcessor, which at last actually processes the request. The request itself is made up of a dictionary which is passing a string valued method name, stored procedure name, a control name and possibly a value. All switching of the processing is done by comparing the string values of the control names and method names. Pages are linked together via a common header control that uses a combination of javascript and tables to create a hyperlink effect. And as I found out yesterday, a simple hyperlink between one page and another does not work because of the need to have quite a bit of information in session to determine which control to display on a page. My fellow programmer and I both believe that this is a strange and uncommon approach to web application development. Both of us have been in this business for over five years and neither of us have seen this approach. My question is this, how would we approach our co-worker and voice our concerns and what should we do if he does not want to accept the criteic? We both do not want to insult the work that has been done, but feel that going forward will create a nightmare for development. Thanks for your comments.

    Read the article

  • Upgrades from Beta or CTP SQL Server Software is NOT Supported

    - by BuckWoody
    As of this writing, SQL Server 2008 R2 has released, and just like every release, I get e-mails and calls from folks with this question: “Can I upgrade from Customer Technical Preview (CTP) x or Beta #x or Release Candidate (RC) to the “Released to Manufacturing” (RTM) version?” No. Right up until the last minute, things are changing in the code – and you want that to happen. Our internal testing runs right up until the second we lock down for release, and we watch the CTP/RC/Beta reports to make sure there are no show-stoppers, and fix what we find. And it’s not just “big” changes you need to worry about – a simple change in one line of code can have a massive effect. I know, I know – you’ve possibly upgraded an RC or CTP to the RTM version and it worked “just fine”. But hear this tale: I’ve dealt with someone who faced this exact situation in SQL Server 2008. They upgraded (which is clearly prohibited in the documentation) from a CTP to the RTM version over a year ago. Everything was working fine. But then…one day they had an issue. Couldn’t fix it themselves, we took a look, days went by, and we finally had to call in the big guns for support. Turns out, the upgrade was the problem. So we had to come up with some elaborate schemes to get the system migrated over while they were in production. This was painful for everyone involved. So the answer is still no. Just don’t do it. There is one caveat to this story – if you are a “TAP” customer (you’ll know if you are), we help you move from the CTP products to RTM, but that’s a special case that we track carefully and send along special instructions and tools to help you along. That level of effort isn’t possible on a large scale, so it’s not just a magic tool that we run to upgrade from CTP to RTM. So again, unless you’re a TAP customer, it’s a no-no. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Yet another frustum culling question

    - by Christian Frantz
    This one is kinda specific. If I'm to implement frustum culling in my game, that means each one of my cubes would need a bounding sphere. My first question is can I make the sphere so close to the edge of the cube that its still easily clickable for destroying and building? Frustum culling is easily done in XNA as I've recently learned, I just need to figure out where to place the code for the culling. I'm guessing in my method that draws all my cubes but I could be wrong. My camera class currently implements a bounding frustum which is in the update method like so frustum.Matrix = (view * proj); Simple enough, as I can call that when I have a camera object in my class. This works for now, as I only have a camera in my main game class. The problem comes when I decide to move my camera to my player class, but I can worry about that later. ContainmentType CurrentContainmentType = ContainmentType.Disjoint; CurrentContainmentType = CamerasFrustrum.Contains(cubes.CollisionSphere); Can it really be as easy as adding those two lines to my foreach loop in my draw method? Or am I missing something bigger here? UPDATE: I have added the lines to my draw methods and it works great!! So great infact that just moving a little bit removes the whole map. Many factors could of caused this, so I'll try to break it down. cubeBoundingSphere = new BoundingSphere(cubePosition, 0.5f); This is in my cube constructor. cubePosition is stored in an array, The vertices that define my cube are factors of 1 ie: (1,0,1) so the radius should be .5. I least I think it should. The spheres are created every time a cube is created of course. ContainmentType CurrentContainmentType = ContainmentType.Disjoint; foreach (Cube block in cube.cubes) { CurrentContainmentType = cam.frustum.Contains(cube.cubeBoundingSphere); ///more code here if (CurrentContainmentType != ContainmentType.Disjoint) { cube.Draw(effect); } Within my draw method. Now I know this works because the map disappears, its just working wrong. Any idea on what I'm doing wrong?

    Read the article

< Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >